IEC 62446-1:2018
光伏(PV)系统 测试、文档和维护的要求 第1部分:并网系统 文档、调试测试和检查

Photovoltaic (PV) systems - Requirements for testing, documentation and maintenance - Part 1: Grid connected systems - Documentation, commissioning tests and inspection

2018-08

IEC 62446-1:2018 发布历史

IEC 62446-1:2018由国际电工委员会 IX-IEC 发布于 2018-08-00。

IEC 62446-1:2018在国际标准分类中归属于: 27.160 太阳能工程。

IEC 62446-1:2018 发布之时,引用了标准

  • IEC 60364-6:2016 低压电气设施.第6部分:检验
  • IEC 60891:2009 光伏器件.测定I-V特性的温度和辐照度校正方法用程序
  • IEC 61010-031:2015 测量、控制和实验室用电气设备的安全要求.第031部分:电气测量和试验用手持式探头组件的安全要求
  • IEC 61010-1:2010 测量、控制和实验室用电气设备的安全性要求.第1部分:一般要求
  • IEC 61010-2-010:2014 测量、控制和实验室用电气设备的安全要求.第2-010部分:材料加热用实验室设备的特殊要求
  • IEC 61010-2-020:2016 测量、控制和实验室用电气设备的安全要求.第2-020部分:实验室离心机的特殊要求
  • IEC 61010-2-030:2017 测量、控制和实验室用电气设备的安全性要求.第2-030部分:具有测试或测量电路设备的特殊要求
  • IEC 61010-2-032:2012 测量、控制和试验室用电气设备的安全性要求.第2-032部分:电气测量和试验用手持和用手控制电流感应器的详细要求
  • IEC 61010-2-033:2012 测量,控制和实验室使用的电气设备安全性要求.第2-033部分:家用和专业用途,能够测量电源电压的手持式万用表和其他手持式计量仪器的详细要求
  • IEC 61010-2-040:2015 测量、控制和实验室用电气设备的安全要求.第2-040部分:处理医疗材料用灭菌器和清洗消毒器的特殊要求
  • IEC 61010-2-051:2015 测量、控制和实验室用电气设备的安全要求.第2-051部分:混合和搅拌用实验室设备的特殊要求
  • IEC 61010-2-061:2015 测量、控制和实验室用电气设备的安全要求.第2-061部分:具有热原子化和离子化的实验室用原子能谱仪的特殊要求
  • IEC 61010-2-081:2015 测量,控制和实验室用电设备的安全性要求.第2-081部分:分析及其他用途的自动和半自动实验室设备的详细要求
  • IEC 61010-2-091:2012 测量、控制和实验室用电气设备的安全性要求.第2-091部分:柜式X射线系统详细要求
  • IEC 61010-2-101:2015 测量、控制和实验室用电气设备的安全要求.第2-101部分:实验室诊断(IVD)医疗设备的特殊要求
  • IEC 61010-2-201:2017 测量、控制和实验室用电气设备的安全性要求.第2-201部分:控制设备的详细要求
  • IEC 61557-1:2007 1000V交流和小于1500V直流低压配电系统中的电气安全性.防护措施的试验、测量和监控设备.第1部分:一般要求
  • IEC 61557-2:2007 1000V交流和小于1500V直流低压配电系统中的电气安全性.防护措施的试验、测量和监控设备.第2部分:绝缘阻抗
  • IEC 61557-3:2007 1000V交流和小于1500V直流低压配电系统中的电气安全性.防护措施的试验、测量和监控设备.第3部分:回路阻抗
  • IEC 61557-4:2007 1000V交流和小于1500V直流的低压配电系统的电气安全性.防护措试验、测量和监控设备.第4部分:接地和等效连接电阻
  • IEC 61557-5:2007 1000V交流和小于1500V直流低压配电系统中的电气安全性.防护措施的试验、测量和监控设备.第5部分:接地电阻

IEC 62446-1:2018的历代版本如下:

  • 2018年 IEC 62446-1:2016/AMD1:2018 光伏(PV)系统 测试、文档和维护的要求 第1部分:并网系统 文档、调试测试和检查;修正案 1
  • 2018年 IEC 62446-1:2018 光伏(PV)系统 测试、文档和维护的要求 第1部分:并网系统 文档、调试测试和检查
  • 2016年 IEC 62446-1:2016 光伏(PV)系统.试验、文件和维护要求.第1部分:网格连接系统.文件、试运行测试和检查

 

This part of IEC 62446 defines the information and documentation required to be handed over to a customer following the installation of a grid connected PV system. It also describes the commissioning tests, inspection criteria and documentation expected to verify the safe installation and correct operation of the system. It can also be used for periodic retesting. This part of IEC 62446 is written for grid connected PV systems that do not utilize energy storage (e. g. batteries) or hybrid systems. This part of IEC 62446 is for use by system designers and installers of grid connected solar PV systems as a template to provide effective documentation to a customer. By detailing the expected commissioning tests and inspection criteria, it is also intended to assist in the verification/inspection of a grid connected PV system after installation and for subsequent re- inspection, maintenance or modifications. This part of IEC 62446 defines the different test regimes expected for different solar PV system types to ensure that the test regime applied is appropriate to the scale, type and complexity of the system in question. NOTE This part of IEC 62446 does not address CPV (concentrating PV) systems, however many of the parts may apply.


IEC 62446-1:2018相似标准


推荐


谁引用了IEC 62446-1:2018 更多引用





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号