ZH
RU
ES

Pre-sintering temperature

Pre-sintering temperature, Total:500 items.

In the international standard classification, Pre-sintering temperature involves: Ceramics, Construction materials, Welding, brazing and soldering, Testing of metals, Coals, Construction technology, Metalliferous minerals, Powder metallurgy, Road engineering, Fibre optic communications, Installations in buildings, Materials for aerospace construction, Equipment for the chemical industry, Elements of buildings, Reinforced plastics, Wastes, Aircraft and space vehicles in general, Services, Magnetic materials, Thermodynamics and temperature measurements, Radiation measurements, Plastics, Protection against fire, Pipeline components and pipelines, Fasteners, Fuels, MECHANICAL SYSTEMS AND COMPONENTS FOR GENERAL USE, Air quality, Petroleum products in general, Graphic technology, Rubber, Test conditions and procedures in general, Iron and steel products, Petroleum, petroleum products and natural gas handling equipment, Explosion protection, Products of the chemical industry, Organic chemicals, Construction industry, Earthworks. Excavations. Foundation construction. Underground works, Structures of buildings, Adhesives, Environmental testing, Non-ferrous metals, Fertilizers, Industrial automation systems, Power stations in general, Industrial furnaces, Semiconductor devices, Analytical chemistry, Ferrous metals, Lubricants, industrial oils and related products, Road vehicles in general, Occupational safety. Industrial hygiene, Electrical wires and cables, Heat recovery. Thermal insulation.

Professional Standard - Light Industry, Pre-sintering temperature

QB/T 1547-2016 Test method for sintering temperature range of ceramic material
QB/T 1547-1992 Method for determination of sintering temperature range of ceramic materials

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Pre-sintering temperature

GB/T 26538-2011 Fired heat preservation brick and block
GB/T 34905-2017 Sintered metal materials—Determination of the level of cleanliness of powder-metallurgy parts

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Pre-sintering temperature

GB 26538-2011 Fired heat preservation brick and block
GB/T 18591-2001 Welding--Guidance on the measurement of preheating temperature,interpass temperature and preheat maintenance temperature
GB/T 9343-2008 Test method for flammability of plastics.Determination of flash-ignition temperature and self-ignition temperature
GB/T 10421-2002 Sintered metal friction materials--Determination of density
GB/T 7964-2020 Sintered metal materials( excluding hardmetal )—Tension testing at room temperature
GB 7964-1987 Sintered metal materials (excluding hardmetal)－Tension testing at room temperature
GB/T 10424-2002 Sintered metal friction materials--Determination of compressive strength
GB/T 10425-2002 Sintered metal friction materials--Determination of apparent hardness
GB/T 6804-2002 Sintered metal bushes--Determination of radial crushing strength
GB/T 6804-2008 Sintered metal bushes.Determination of radial crushing strength
GB/T 10423-2002 Sintered metal friction materials--Determination of tensile strength
GB/T 31909-2015 Permeable sintered metal materials.Determination of the air permeability
GB/T 32076.2-2015 Preloaded high strength bolted structural connections part 2: preload adaptability
GB/T 10422-2002 Sintered metal friction materials--Determination of transverse ruptue strength
GB/T 14202-1993 Iron ores (sinter and pellets)--Determination of bulk density
GB 8209-1987 Iron one pellets and slnter - Determination of tumbler strength
GB/T 5163-2006 Sintered metal materials,excluding hardmetals.Permeable sintered metal materials.Determination of density,oil content,and open porosity
GB/Z 21193.3-2007 Fossil-fired steam power stations.Part 3: Steam-temperature controls
GB/T 3850-2015 Impermeable sintered metal materials and hardmetals.Determination of density
GB/T 9097-2016 Sintered metal materials, excluding hardmetals.Determination of apparent hardness and mincrohardness

British Standards Institution (BSI), Pre-sintering temperature

BS EN ISO 13916:2017 Welding. Measurement of preheating temperature, interpass temperature and preheat maintenance temperature
BS EN ISO 13916:1997 Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
PD IEC/TR 62518:2009 Rare earth sintered magnets. Stability of the magnetic properties at elevated temperatures
BS EN 14617-2:2008 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
BS ISO 24033:2009 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength
BS EN 12470-3:2000+A1:2009 Clinical thermometers. Performance of compact electrical thermometers (non-predictive and predictive) with maximum device
BS EN 14399-2:2015 High-strength structural bolting assemblies for preloading. Suitability for preloading
BS EN ISO 2738:2000 Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity
BS EN 14617-15:2005 Agglomerated stone - Test methods - Determination of compressive strength
BS EN ISO 2739:2010 Sintered metal bushes - Determination of radial crushing strength
BS EN ISO 2739:2012 Sintered metal bushings. Determination of radial crushing strength
BS ISO 12230:2012 Polybutene-1 (PB-1) pipes. Effect of time and temperature on the expected strength
BS EN 60068-2-39:2016 Environmental testing. Tests. Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
BS EN 14617-2:2004 Agglomerated stone-Test methods-Part 2:Determination of flexural strength(bending)
BS ISO 23381:2020 Determination of salt out (crystallization) temperature of liquid fertilizers
BS EN 14399-2:2005 High-strength structural bolting assemblies for preloading. Suitability test for preloading
BS ISO 28279:2010 Sintered metal materials. Determination of the level of cleanliness of powder-metallurgy parts
BS EN 14399-5:2015 High-strength structural bolting assemblies for preloading. Plain washers
BS EN 14617-1:2013 Agglomerated stone. Test methods. Determination of apparent density and water absorption
BS EN 14617-1:2005 Agglomerated stone - Test methods - Determination of apparent density and water absorption
BS EN ISO 3369:2010 Impermeable sintered metal materials and hardmetals - Determination of density
BS EN ISO 4498:2010 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
BS EN 14399-1:2005 High-strength structural bolting assemblies for preloading. General requirements
BS EN 14399-5:2005 High-strength structural bolting assemblies for preloading - Plain washers
BS EN 14399-1:2015 High-strength structural bolting assemblies for preloading. General requirements
BS ISO 23519:2010 Sintered metal materials, excluding hardmetals - Measurement of surface roughness
20/30379723 DC BS ISO 23381. Determination of Salt Out (Crystallization) Temperature of Liquid Fertilizers
BS EN 14399-6:2015 High-strength structural bolting assemblies for preloading. Plain chamfered washers
BS EN ISO 4498:2007 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
BS ISO 14317:2007 Sintered metal materials excluding hardmetals - Determination of compressive yield strength
BS ISO 14317:2015 Sintered metal materials excluding hardmetals. Determination of compressive yield strength

Association Francaise de Normalisation, Pre-sintering temperature

NF A89-253*NF EN ISO 13916:2018 Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature
NF EN ISO 13916:2018 Soudage - Mesurage de la température de préchauffage, de la température entre passes et de la température de maintien du préchauffage
NF A89-253:1996 Welding. Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature.
NF T57-556:1973 Pre-impregnated glass fabrics. Determination of the thickness of a layer of pre-impregnated product after pressing and curing.
NF E25-812:2004 High-strength structural bolting for preloading - HRC system - Preloaded bolts.
NF EN ISO 2739:2012 Bagues en métal fritté - Détermination de la résistance à l'écrasement radial
NF A95-325*NF EN ISO 2739:2012 Sintered metal bushings - Determination of radial crushing strength.
NF A95-325:1998 Sintered metal bushes. Determination of radial crushing strength.
NF EN 54-30:2015 Système de détection et d'alarme incendie - Partie 30 : détecteurs d'incendie ponctuels utilisant une combinaison de capteurs de monoxyde de carbone et de température
NF EN ISO 2738:2000 Matériaux métalliques frittés, à l'exclusion des métaux durs - Matériaux métalliques frittés perméables - Détermination de la masse volumique, de la teneur en huile et de la porosité ouverte
NF A95-332*NF EN ISO 3369:2010 Impermeable sintered metal materials and hardmetals - Determination of density.
NF U42-681:2020 Determination of salt out (crystallization) temperature of liquid fertilizers
NF ISO 23381:2020 Détermination de la température de désolubilisation (cristallisation) des engrais liquides
NF EN ISO 3369:2010 Matériaux en métal fritté imperméable et métaux-durs - Détermination de la masse volumique
NF A95-311*NF EN ISO 2738:2000 Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity.
NF B10-602-15:2005 Agglomerated stone - Test methods - Part 15 : determination of compressive strength.
NF E25-801-2:2005 High-strength structural bolting assemblies for preloading - Part 2 : suitability test for preloading.
NF A95-313:1993 Impermeable sintered metal materials and hardmetals. Determination of density.
NF EN ISO 4498:2010 Matériaux métalliques frittés, à l'exclusion des métaux-durs - Détermination de la dureté apparente et de la microdureté
NF T76-052:2006 Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT '91).
NF P18-410*NF EN 13791:2019 Assessment of in-situ compressive strength in structures and precast concrete components
NF EN 13791:2019 Évaluation de la résistance à la compression sur site des structures et des éléments préfabriqués en béton
NF T51-071-2*NF EN ISO 4589-2:2017 Plastics - Determination of burning behaviour by oxygen index - Part 2 : ambient-temperature test
NF ISO 11346:2014 Caoutchouc vulcanisé ou thermoplastique - Estimation de la durée de vie et de la température maximale d'utilisation
NF A95-321:2008 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness.
NF A95-321*NF EN ISO 4498:2010 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
NF B10-602-2:2008 Agglomerated stone - Test methods - Part 2 : determination of flexural strength (bending).
NF A95-323*NF EN ISO 3325:1999 Sintered metal materials, excluding hardmetals. Determination of transverse rupture strength.
NF B10-602-2*NF EN 14617-2:2016 Agglomerated stone - Test methods - Part 2 : determination of flexural strength (bending)
NF EN ISO 3325:1999 Matériaux métalliques frittés à l'exclusion des métaux-durs - Détermination de la résistance à la rupture transversale

International Organization for Standardization (ISO), Pre-sintering temperature

ISO 13916:2017 Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature
ISO 13916:1996 Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
ISO/CD 4075 Polysulfone (PSU) — Effect of time and temperature on expected strength
ISO/CD 4076 Polyphenylsulphone (PPSU) — Effect of time and temperature on expected strength
ISO 24033:2006 Pipes made of raised-temperature-resistance polyethylene (PE-RT) - Effect of time and temperature on the expected strength
ISO 24033:2009 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength
ISO 3213:2009 Polypropylene (PP) pipes - Effect of time and temperature on the expected strength
ISO 12230:1996 Polybutene (PB) pipes - Effect of time and temperature on the expected strength
ISO 2739:2012 Sintered metal bushings - Determination of radial crushing strength
ISO 2739:2006 Sintered metal bushes - Determination of radial crushing strength
ISO 2739:1973 Sintered metal bushes; Determination of radial crushing strength
ISO/CD 4070 Polyvinylidene fluoride (PVDF) — Effect of time and temperature on expected strength
ISO/TR 9492:1987 Bases for design of structures; Temperature climatic actions
ISO 9492:1987 Bases for design of structures; Temperature climatic actions
ISO 12230:2012 Polybutene-1 (PB-1) pipes - Effect of time and temperature on the expected strength
ISO 23381:2020 Determination of salt out (crystallization) temperature of liquid fertilizers
ISO 10146:1997 Crosslinked polyethylene(PE-X)pipes - Effect of time and temperature on the expected strength
ISO 28279:2010 Sintered metal materials - Determination of the level of cleanliness of powder-metallurgy parts
ISO 2738:1973 Permeable sintered metal materials — Determination of density and open porosity
ISO 4793:1980 Laboratory sintered (fritted) filters; Porosity grading, classification and designation
ISO 3369:1975 Impermeable sintered metal materials and hardmetals; Determination of density
ISO 7060:1982 Caprolactam for industrial use; Determination of crystallizing point
ISO 471:1983 Rubber; Standard temperatures, humidities and times for the conditioning and testing of test pieces
ISO 2738:1987 Permeable sintered metal materials; Determination of density, oil content, and open porosity
ISO 12982-1:2000 Carbonaceous materials used in the production of aluminium - Calcined coke; Determination of the reactivity to air - Part 1: Ignition temperature method
ISO 3369:2006 Impermeable sintered metal materials and hardmetals - Determination of density
ISO 4498:2005 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
ISO 4498:2010 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
ISO 23519:2010 Sintered metal materials, excluding hardmetals - Measurement of surface roughness

Standard Association of Australia （SAA）, Pre-sintering temperature

AS ISO 13916:2018 Welding — Measurement of preheating temperature, interpass temperature and preheat maintenance temperature
AS EN 12470.3:2004 Clinical thermometers - Performance of compact electrical thermometers (non-predictive and predictive) with maximum device

German Institute for Standardization, Pre-sintering temperature

DIN EN ISO 13916:2018-03 Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:2017); German version EN ISO 13916:2017
DIN EN ISO 13916:1996 Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:1996); German version EN ISO 13916:1996
DIN EN ISO 13916:2018 Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:2017); German version EN ISO 13916:2017
DIN 30912-6:1990-10 Sintered metal materials; sint-guide-lines; part 6: fatigue strength of sintered steels
DIN EN ISO 2739:2012-10 Sintered metal bushings - Determination of radial crushing strength (ISO 2739:2012); German version EN ISO 2739:2012
DIN EN 12470-3:2009 Clinical thermometers - Part 3: Performance of compact electrical thermometers (non-predictive and predictive) with maximum device(includes Amendment A1:2009); English version of DIN EN 12470-3:2009-11
DIN EN 14617-2:2008 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending); German version EN 14617-2:2008
DIN EN ISO 2738:2000-02 Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity (ISO 2738:1999); German version EN ISO 2738:1999
DIN EN ISO 2738:2000 Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity (ISO 2738:1999); German version EN ISO 2738:1999
DIN EN 14399-2:2015-04 High-strength structural bolting assemblies for preloading - Part 2: Suitability for preloading; German version EN 14399-2:2015
DIN EN 14617-15:2005 Agglomerated stone - Test methods - Part 15: Determination of compressive strength; German version EN 14617-15:2005
DIN EN ISO 4498:2010-11 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010); German version EN ISO 4498:2010
DIN EN 14257:2006 Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT'91) English version of DIN EN 14257:2006-09
DIN EN 13791:2020 Assessment of in-situ compressive strength in structures and precast concrete components
DIN EN 13791:2020-02 Assessment of in-situ compressive strength in structures and precast concrete components; German version EN 13791:2019 / Note: To be amended by DIN EN 13791/A20 (2021-09).
DIN EN 14399-2:2005 High-strength structural bolting assemblies for preloading - Part 2: Suitability test for preloading; German version EN 14399-2:2005
DIN EN 14399-2:2006 High-strength structural bolting assemblies for preloading - Part 2: Suitability test for preloading English version of DIN EN 14399-2:2006-06
DIN 50969-1:2009 Prevention of hydrogen-induced brittle fracture of high-strength steel building elements - Part 1: Advice on the prevention
DIN ISO 4498:2005 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2005);English version of DIN ISO 4498:2005
DIN EN ISO 4498:2007 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2005); German version EN ISO 4498:2007
DIN EN ISO 3369:2010-08 Impermeable sintered metal materials and hardmetals - Determination of density (ISO 3369:2006); German version EN ISO 3369:2010
DIN ISO 23519:2015-12 Sintered metal materials, excluding hardmetals - Measurement of surface roughness (ISO 23519:2010)

国家市场监督管理总局、中国国家标准化管理委员会, Pre-sintering temperature

GB/T 6525-2019 Determination of compression strength for sintered metal materials at room temperature
GB/T 39246-2020 Prefabricated directly buried insulating fittings with seamless high density polyethylene casing pipe
GB/T 38595-2020 Safety and control devices for gas burners and gas-burning appliances—Particular requirements—Mechanical thermostats
GB/T 40389-2021 Sintered metal materials, excluding hardmetals—Measurement of surface roughness

Hebei Provincial Standard of the People's Republic of China, Pre-sintering temperature

DB13/T 2767-2018 Determination method of slagging property of raw coal for gasification - Sintering temperature method

Korean Agency for Technology and Standards (KATS), Pre-sintering temperature

KS B ISO 13916-2003(2008) Welding－Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
KS B ISO 13916:2003 Welding-Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
KS B ISO 13916:2013 Welding－Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
KS D 0033-2001 Method for determination of density of metal powder sintered materials
KS D 0033-1990 Method for determination of density of metal powder sintered materials
KS D 0033-1985 Method for determination of density of metal powder sintered materials
KS E 3714-2022 Iron ore sinter — Determination of shatter strength
KS E 3714-1981 Iron ore sinter — Determination of shatter strength
KS L 5506-2006 Testing method for modulus of rupture of unfired clays
KS E 3714-1997(2002) Iron ore sinter－Determination of shatter strength
KS E 3714-2012(2017) Iron ore sinter－Determination of shatter strength
KS L 5506-1981 Testing method for modulus of rupture of unfired clays
KS E 3733-1989 Determination or Carbon Monoxide and Temperature in Combustion Gases of Holed Briquette
KS D ISO 2738:2011 Sintered metal materials, excluding hardmetals-Permeable sintered metal materials-Determination of density, oil content and open porosity
KS D ISO 2738:2013 Sintered metal materials, excluding hardmetals-Permeable sintered metal materials-Determination of density, oil content and open porosity
KS D ISO 2739:2011 Sintered metal bushes-Determination of radial crushing strength
KS D 0051-2012 Sintered metal bushes－Determination of radial crushing strength
KS D 0051-2002(2007) Sintered metal bushes－Determination of radial crushing strength
KS D 0033-2001(2021) Method for determination of density of metal powder sintered materials
KS E 7002-2005 Methods for determination of carbon monoxide andtemperature from combustion gases generated fromcombustion apparatus for holed coal briquette
KS E 7002-1973 Methods for determination of carbon monoxide andtemperature from combustion gases generated fromcombustion apparatus for holed coal briquette
KS M ISO 10146:2004 Crosslinked polyethylene(PE-X) pipes－Effect of time and temperature of the expected strength
KS M ISO 10146:2019 Crosslinked polyethylene(PE-X) pipes — Effect of time and temperature on the expected strength
KS M ISO 14615:2007 Adhesives－Durability of structural adhesive joints－Exposure to humidity and temperature under load
KS L 1203-2002(2022) Testing method for compressive(crushing)strength of fired whiteware materials
KS D 0069-2002 Method of determining the crystallization temperatures of amorphous metals
KS E 3733-2014 Determination or carbon monoxide and temperature in combustion gases of holed briquette
KS E 3733-2014(2019) Determination or carbon monoxide and temperature in combustion gases of holed briquette
KS E 7002-2002 Methods for determination of carbon monoxide andtemperature from combustion gases generated fromcombustion apparatus for holed coal briquette
KS D ISO 3995:2001 Metallic powders-Determination of green strength by transverse rupture of rectangular compacts
KS D 0033-2001(2016) Method for determination of density of metal powder sintered materials
KS D 0069-2002(2022) Method of determining the crystallization temperatures of amorphous metals
KS D ISO 3369:2011 Impermeable sintered metal materials and hardmetals-Determination of density
KS D ISO 3369:2015 Impermeable sintered metal materials and hardmetals－Determination of density
KS B ISO 386:2007 Liquid-in-glass laboratory thermometers－Principles of design, construction and use
KS D 0069-2002(2017) Method of determining the crystallization temperatures of amorphous metals
KS M ISO 4589-2:2016 Plastics－Determination of burning behaviour by oxygen index－Part 2：Ambient-temperature test
KS M ISO 4589-2-2016(2021) Plastics－Determination of burning behaviour by oxygen index－Part 2：Ambient-temperature test
KS M ISO 4589-2:2022 Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
KS D ISO 4498:2010 Sintered metal materials, excluding hardmetals-Determination of apparent hardness and microhardness

International Electrotechnical Commission (IEC), Pre-sintering temperature

IEC TR 62899-304-1:2023 Printed electronics - Part 304-1: Equipment - Sintering - Temperature measurement method for photonic sintering system
IEC TR 62518:2009 Rare earth sintered magnets - Stability of the magnetic properties at elevated temperatures
IEC TR 62140-3:2002 Fossil-fired steam power stations - Part 3: Steam-temperature control
IEC 61034-1:2019 Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
IEC 61034-1:2005+AMD1:2013 CSV Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
IEC 61034-1:2013 Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus

Group Standards of the People's Republic of China, Pre-sintering temperature

T/CECS 1023-2022 Technical specifications for prefabricated self-insulating walls of sintered silt porous bricks
T/CSTM 00202-2020 high temperature kiln fired slag bricks
T/CIEEMA 007-2022 Sintered thermal insulation lightweight composite wallboard
T/CEMIA 003-2017 Quartz Tube for Sintering of Optical Fiber Preform
T/NBEA 003-2019 High temperature sintering of surface treatment sludge to produce ceramsite
T/CBTA 0005-2020 Technical specification for sintered composite insulation brick and insulation block wall insulation system
T/CECS 1193-2022 Technical specification for sintered composite insulation brick and insulation block wall insulation system
T/ZZXJX 067-2021 Technical specification for application of shale sintered thermal insulation blocks
T/GDCCA 005-2022 Specification for temperature control of cold chain prepared dishes
T/GDCCA 005-2023 Specification for temperature control of cold chain prepared dishes
T/CIEEMA 008-2022 Technical specification for application of sintered thermal insulation lightweight composite wallboard
T/CIECCPA 033-2023 Energy saving technical requirements of sintering and pelletizing emission low temperature SCR denitration system
T/SCDA 066-2021 KM foam ceramic thermal insulation decoration sintering integrated board external wall external thermal insulation system building structure
T/SCDA 050-2020 Building structure of DE sintered silt porous brick composite thermal insulation wall system
T/SCDA 050-2023 DE sintered silt porous brick composite insulation wall system building structure
T/SCDA 049-2020 Application technical standard of DE sintered silt porous brick composite thermal insulation wall system
T/SCDA 049-2023 DE sintered silt porous brick composite insulation wall system application technical standards
T/CASAS 018-2021 Test method for shear strength of micro and nano metal sintered joints
T/CECS 529-2018 Early warning threshold standard for long-span bridge structure health monitoring system
T/BCMA 002-2021 Technical specification for the application of metal anchors for precast concrete sandwich insulation exterior wall panels

CEN - European Committee for Standardization, Pre-sintering temperature

EN ISO 13916:2017 Welding - Measurement of preheating temperature@ interpass temperature and preheat maintenance temperature
PREN 13791-2018 Assessment of in-situ compressive strength in structures and precast concrete components
EN 14617-2:2004 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)

Danish Standards Foundation, Pre-sintering temperature

DS/EN ISO 13916:1997 Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
DS/ISO 24033:2009 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength
DS/ISO 1392:1986 Determination of crystallizing point — General method
DS/EN ISO 2739:2012 Sintered metal bushings - Determination of radial crushing strength
DS/ISO 471:1985 Rubber. Standard temperatures, humidities and times for the conditioning and testing of test pieces
DS/ISO 12230:2012 Polybutene-1 (PB-1) pipes - Effect of time and temperature on the expected strength
DS/EN 14399-2:2005 High-strength structural bolting assemblies for preloading - Part 2: Suitability test for preloading
DS/EN 23369:1994 Impermeable sintered metal materials and hardmetals-Determination of density
DS/EN ISO 2738:2000 Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity
DS/EN ISO 4498:2010 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
DS/EN 14399-5/AC:2006 High-strength structural bolting assemblies for preloading - Part 5: Plain washers
DS/EN 14399-5:2005 High-strength structural bolting assemblies for preloading - Part 5: Plain washers
DS/EN 13791:2007 Assessment of in-situ compressive strength in structures and precast concrete components
DS/EN ISO 4589-2/A1:2006 Plastics – Determination of burning behaviour by oxygen index – Part 2: Ambient-temperature test
DS/EN ISO 4589-2:1999 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test
DS/EN ISO 3369:2010 Impermeable sintered metal materials and hardmetals - Determination of density

Japanese Industrial Standards Committee (JISC), Pre-sintering temperature

JIS Z 3703:2004 Welding -- Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
JIS M 8711:1993 Iron ore sinter -- Determination of shatter strength
JIS M 8711:2011 Iron ore sinter -- Determination of shatter strength
JIS M 8711 AMD 1:2017 Iron ore sinter -- Determination of shatter strength (Amendment 1)
JIS Z 2507:2000 Sintered metal bearing -- Determination of radial crushing strength
JIS K 6795:1998 Crosslinked polyethylene (PE-X) pipes -- Effect of time and temperature on the expected strength
JIS Z 2501:2000 Sintered metal materials -- Determination of density, oil content, and open porosity
JIS K 7201-2:2021 Plastics -- Determination of burning behaviour by oxygen index -- Part 2: Ambient-temperature test

ES-UNE, Pre-sintering temperature

UNE-EN ISO 13916:2018 Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:2017)
UNE-EN 14399-2:2016 High-strength structural bolting assemblies for preloading - Part 2: Suitability for preloading
UNE-EN 60068-2-39:2016 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
UNE-EN 13791:2020 Assessment of in-situ compressive strength in structures and precast concrete components

Lithuanian Standards Office , Pre-sintering temperature

LST EN ISO 13916:1998 Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:1996)
LST EN 12470-3-2001+A1-2009 Clinical thermometers - Part 3: Performance of compact electrical thermometers (non-predictive and predictive) with maximum device
LST EN 14399-2-2015 High-strength structural bolting assemblies for preloading - Part 2: Suitability for preloading
LST EN 14399-2-2005 High-strength structural bolting assemblies for preloading - Part 2: Suitability test for preloading
LST EN ISO 2739:2012 Sintered metal bushings - Determination of radial crushing strength (ISO 2739:2012)
LST EN ISO 2738:2002 Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity (ISO 2738:1999)
LST EN 14399-5-2015 High-strength structural bolting assemblies for preloading - Part 5: Plain washers
LST EN 14399-5-2005 High-strength structural bolting assemblies for preloading - Part 5: Plain washers
LST EN 14399-5-2005/AC-2006 High-strength structural bolting assemblies for preloading - Part 5: Plain washers
LST EN 13791-2007 Assessment of in-situ compressive strength in structures and precast concrete components

AENOR, Pre-sintering temperature

UNE-EN ISO 13916:1996 Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:1996)
UNE 31011:1976 IMFLAMMATION TEMPERATURE OF NITROCELUSOSES, POWDERS AND EXPLOSIVES.
UNE-EN ISO 2739:2012 Sintered metal bushings - Determination of radial crushing strength (ISO 2739:2012)
UNE 40462:1983 TEXTILE FLOOR COVERINGS. BURNING BEHAVIOUR. TABLET TES AT AMBIENT TEMPERATURE
UNE-EN 13791:2009 Assessment of in-situ compressive strength in structures and precast concrete components
UNE-EN ISO 2738:2000 SINTERED METAL MATERIALS, EXCLUDING HARDMETALS. PERMEABLE SINTERED METAL MATERIALS. DETERMINATION OF DENSITY, OIL CONTENT AND OPEN POROSITY (ISO 2738:1999)

Taiwan Provincial Standard of the People's Republic of China, Pre-sintering temperature

CNS 9205-1982 Method for Determining Density of Metal Powder Sintered Materials
CNS 9207-1982 Method for Determining Radial Crushing Strength Constant of Metal Powder Sintered Bearing Oil Impregated

RU-GOST R, Pre-sintering temperature

GOST 26517-1985 Irom ores, agglomerates and pellets. Method for determination of initial softening point and temperature range of softening
GOST 27446-1987 Iron ores, aglomerates and pellets. Method for determination of strength after low-temperature static reduction
GOST 20018-1974 Sintered hardmetals. Determination of densitu
GOST 16126-1991 Coal. Determination of caking power. Gray-King method
GOST 20017-1974 Sintered hard metals. Determination of Rockwell hardness
GOST 25172-1982 Sintered hardmetals. Method of determination of Vickers hardness
GOST 32484.2-2013 High-strength structural bolting assemblies for preloading. Suitability test for preloading
GOST 20287-1991 Petroleum products. Methods of test for flow point and pour point
GOST 20841.3-1975 Silicium organic products. Method for determination of congelation temperature
GOST 26743.2-1991 Caprolactam for industrial use. Determination of crystallizing point
GOST 32484.5-2013 High-strength structural bolting assemblies for preloading. Plain washers
GOST 20019-1974 Sintered hard metals. Determination of cross-bending strength
GOST 18995.5-1973 Organic chemical products. Methods for determination of freezing point
GOST 32484.1-2013 High-strength structural bolting assemblies for preloading. General requirements
GOST 25471-1982 Iron ores, concentrates, agglomerates and pellets. Method for the determination of solidity on droption
GOST R 57360-2016 Construction of concrete prefabricated. Determination of strength of concrete in compression
GOST 32484.6-2013 High-strength structural bolting assemblies for preloading. Plain chamfered washers
GOST R ISO 7243-2007 Hot environments. Estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature)
GOST 19575-1984 Iron ores, agglomerates and pellets. Method for determination of reduction strength
GOST 24236-1980 Manganese ores, concentrates and agglomerates. Determination of size distribution by sieving
GOST 20784-1975 Manganese ore concentrates and agglomerates. Methods of sampling and sample preparation for mechanical strength determination
GOST 27562-1987 Iron ores, concentrates, sinters and pellets. Determination of size distribution by sieving

AT-ON, Pre-sintering temperature

ONORM EN ISO 13916:1996 Welding-Guidance on the measurement of preheating trmperature,interpass temperature and preheat maintenance temperature
ONORM H 5195-1-2001 Prevention of damage by corrosion and scale formation in closed warm-water-heating systems up to 100 ℃ operating tempertures

European Committee for Standardization (CEN), Pre-sintering temperature

EN ISO 13916:1996 Welding - Guidance on the Measurement of Preheating Temperature, Interpass Temperature and Preheat Maintenance Temperature ISO 13916: 1996
EN ISO 2739:2010 Sintered metal bushes - Determination of radial crushing strength
EN ISO 2739:2012 Sintered metal bushings - Determination of radial crushing strength (ISO 2739:2012)
EN 12470-3:2000 Clinical thermometers - Part 3: Performance of compact electrical thermometers (non-predictive and predictive) with maximum device Incorporates Amendment A1: 2009
EN 14617-2:2008 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
EN ISO 2739:1998 Sintered Metal Bushes - Determination of Radial Crushing Strength ISO 2739:1973
EN 14617-15:2005 Agglomerated stone - Test methods - Part 15: Determination of compressive strength
EN 14399-2:2005 High-strength structural bolting assemblies for preloading - Part 2: Suitability test for preloading
EN 14399-2:2015 High-strength structural bolting assemblies for preloading - Part 2: Suitability for preloading
EN ISO 4498:2010 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010)
EN 14617-2:2016 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)

American Concrete Institute, Pre-sintering temperature

ACI 209R-1992 Prediction of Creep, Shrinkage, and Temperature Effects in Concrete Structures

工业和信息化部, Pre-sintering temperature

JC/T 2612-2021 Quartz furnace tube for fiber optic preform sintering
YB/T 4606-2017 Determination of drop strength of sinter
JC/T 2363-2016 General technical conditions for complete production equipment of sintered thermal insulation bricks and thermal insulation blocks
YB/T 4861-2020 Technical specifications for medium-temperature selective catalytic reduction denitrification of sintering flue gas
YS/T 1482-2021 Determination of strength of tubular compacts of sintered metal porous materials
JB/T 14680-2022 Determination of effective hardening depth after induction hardening of sintered iron-based parts
YB/T 4605-2017 Technical specifications for online automatic sampling, sample preparation, particle size analysis and drum strength determination of sinter

CZ-CSN, Pre-sintering temperature

CSN 44 1789-1985 Iron ores, aglomerates and pellets. Method for determination of start temperature and temperature interval of softening.
CSN 42 0891 Cast.3-1982 Hardness test for sintered products
CSN 42 0891 Cast.2-1986 Testing of sintered products. Tensile strength test
CSN 65 0311-1981 Method for determination of rystallization temperature
CSN 72 5035-1979 Test of fired ceramic materials. Definition of íliG iesislance to temperature change
CSN 42 0892 Cast.3-1980 Testing of sintered carbides. Determination of density
CSN 42 0892 Cast.8-1981 Testing of sintered carbides. Vickers hardness test.
CSN 72 5034-1973 Testing of fired ceramic materials. Definition of the resistance to temperature change
CSN 25 8158-1973 Thermometers for determination of congealing point on bulb
CSN 42 0891 Cast.4-1986 Testing of sintered products. Deflection test
CSN 42 0891 Cast.10-1986 Testing of sintered products. Determination of radial crushing strength
CSN 73 2581-1983 Test for resistance or surface finish of building structures to acute temperature variations
CSN 42 0892 Cast.4-1981 Testing of sintered carbides. Rockwell hardness test (scale A)
CSN 42 0892 Cast.5-1980 Testing of sintered carbides. Determination of transverse rupture strength
CSN 42 0349-1988 Metal testing. Determination of the nil-ductility transition temperature of structural steels
CSN 42 0892 Cast.11-1983 Testing of sintered carbides Determination of porosity and uncombined carbon.
CSN 44 1822-1989 Iron ores and manganese ores, agglomerates and pellets. Methods for determination of specific, apparent and bulk density
CSN 44 1788-1984 Iron ores, aglomerates and pellets. Method of determination of reduction strenght

Professional Standard - Electron, Pre-sintering temperature

SJ 21124-2016 General specification for low temperature co-fired ceramic sintering furnace
SJ 20974-2007 Generic specification for high temperature sintering elevator furnace

AASHTO - American Association of State Highway and Transportation Officials, Pre-sintering temperature

T 317-2004 Standard Method of Test for Prediction of Asphalt-Bound Pavement Layer Temperatures

American Society for Testing and Materials (ASTM), Pre-sintering temperature

ASTM D7228-06a(2011) Standard Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures
ASTM E377-96(2002) Standard Practice for Internal Temperature Measurements in Low-Conductivity Materials
ASTM E377-96 Standard Practice for Internal Temperature Measurements in Low-Conductivity Materials
ASTM E377-08(2015) Standard Practice for Internal Temperature Measurements in Low-Conductivity Materials
ASTM E1502-16 Standard Guide for Use of Fixed-Point Cells for Reference Temperatures
ASTM F470-89(2003) Standard Practice for Caking Temperature of Dry Electrostatic Toner
ASTM E1502-98(2003)e1 Standard Guide for Use of Freezing-Point Cells for Reference Temperatures
ASTM D7228-06a(2020) Standard Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures
ASTM E2021-06 Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers
ASTM E2021-01 Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers
ASTM E2021-00 Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers
ASTM E377-08 Standard Practice for Internal Temperature Measurements in Low-Conductivity Materials
ASTM E2021-15 Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers
ASTM E2021-09(2013) Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers
ASTM E2021-09 Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers
ASTM B294-10 Standard Test Method for Hardness Testing of Cemented Carbides
ASTM D7228-06 Standard Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures
ASTM D7228-06a Standard Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures
ASTM B406-96(2010) Standard Test Method for Transverse Rupture Strength of Cemented Carbides
ASTM B771-11 Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides
ASTM D3829-20 Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil
ASTM D3829-93(1998) Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil
ASTM D7228-06a(2015) Standard Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures
ASTM D3829-17 Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil
ASTM D3829-20a Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil
ASTM D3829-02(2007) Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil
ASTM D3829-12 Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil
ASTM D3829-14 Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil
ASTM D3829-02 Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil
ASTM D3829-18 Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil
ASTM D1151-00(2022) Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds
ASTM B312-96(2002) Standard Test Method for Green Strength for Compacted Metal Powder Specimens
ASTM B312-96 Standard Test Method for Green Strength for Compacted Metal Powder Specimens
ASTM B312-09 Standard Test Method for Green Strength of Specimens Compacted from Metal Powders
ASTM C1146-96(2003) Standard Guide for Prefabricated Panel Insulation Systems for Ducts and Equipment Operating at Temperatures Above Ambient Air
ASTM C667-09 Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air
ASTM C1146-09(2013) Standard Guide for Prefabricated Panel and Hndash;bar Insulation Systems for Vessels, Ducts and Equipment Operating at Temperatures Above Ambient Air
ASTM C667-09(2014) Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air
ASTM C1146-09 Standard Guide for Prefabricated Panel and Hx2013;bar Insulation Systems for Vessels, Ducts and Equipment Operating at Temperatures Above Ambient Air

Society of Automotive Engineers (SAE), Pre-sintering temperature

SAE AMS7725A-1976 TUNGSTEN ALLOY, SINTERED, HIGH DENSITY
SAE AMS7725-1957 ALLOY, SINTERED, HIGH DENSITY Tungsten Base
SAE AMS7910A-2001 Beryllium Near-Net Preforms Standard Grade Cold Isostatic Pressed, Sintered
SAE AMS7910D-2015 Beryllium Near-Net Preforms Standard Grade Cold Isostatic Pressed@ Sintered
SAE AMS7910D-2018 Beryllium Near-Net Preforms Standard Grade Cold Isostatic Pressed, Sintered
SAE AMS-F-7190B-2016 Tungsten Heavy Alloy Shapes, Sintered, High Density
SAE AMS7725E-2016 Tungsten Heavy Alloy Shapes, Sintered, High Density
SAE AMS-C-81562A-2018 Tungsten Heavy Alloy Shapes, Sintered, High Density
SAE AMS7725B-1992 TUNGSTEN ALLOY SHAPES, SINTERED, HIGH DENSITY
SAE AMS7725F-2020 Tungsten Heavy Alloy Shapes, Sintered, High Density
SAE AMS7910C-2010 Beryllium Near-Net Preforms Standard Grade Cold Isostatic Pressed, Sintered
SAE AMS7725D-2007 Tungsten Heavy Alloy Shapes, Sintered, High Density
SAE AMS7725E-2012 Tungsten Alloy Shapes, Sintered, High Density
SAE AMS3657C-1998 Polytetrafluoroethylene Extrusions Premium Strength, As Sintered
SAE AMS3656E-1998 Polytetrafluoroethylene Extrusions Normal Strength, As Sintered
SAE AMS3657C-1993 Polytetrafluoroethylene Extrusions, Premium Strength, As Sintered
SAE AMS3657D-2008 Polytetrafluoroethylene (PTFE) Extrusions, Premium Strength, As Sintered
SAE AMS3656G-2010 Polytetrafluoroethylene (PTFE) Extrusions, Normal Strength, As Sintered
SAE AMS3656E-1993 Polytetrafluoroethylene Extrusions, Normal Strength, As Sintered
SAE AMS3656F-2008 Polytetrafluoroethylene (PTFE) Extrusions, Normal Strength, As Sintered
SAE AMS3657F-2011 Polytetrafluoroethylene (PTFE) Extrusions, Premium Strength, As Sintered
SAE AMS3657E-2010 Polytetrafluoroethylene (PTFE) Extrusions, Premium Strength, As Sintered
SAE AMS3656H-2011 Polytetrafluoroethylene (PTFE) Extrusions, Normal Strength, As Sintered
SAE AMS3656D-2011 POLYTETRAFLUOROETHYLENE EXTRUSIONS Normal Strength, As Sintered, Radiographically Inspected
SAE AMS3657-1966 POLYTETRAFLUOROETHYLENE EXTRUSIONS Premium Strength, As Sintered, Radiographically Inspected
SAE AMS3659C-1998 Polytetrafluoroethylene Extrusions Premium Strength, Sintered and Stress-Relieved
SAE AMS3656B-1976 POLYTETRAFLUOROETHYLENE EXTRUSIONS Normal Strength, As Sintered, Radiographically Inspected
SAE AMS3656A-1966 POLYTETRAFLUOROETHYLENE EXTRUSIONS Normal Strength, As Sintered, Radiographically Inspected
SAE AMS3657A-1976 POLYTETRAFLUOROETHYLENE EXTRUSIONS Premium Strength, As Sintered, Radiographically Inspected
SAE AMS3657B-2011 POLYTETRAFLUOROETHYLENE EXTRUSIONS Premium Strength, As Sintered, Radiographically Inspected
SAE AMS3659C-1993 Polytetrafluoroethylene Extrusions, Premium Strength, Sintered and Stress-Relieved

Professional Standard - Construction Industry, Pre-sintering temperature

JGJ/T 447-2018 Application technical standard of sintered thermal insulation block

Military Standard of the People's Republic of China-General Armament Department, Pre-sintering temperature

GJB 9262-2017 Specification for high temperature sintered ceramic coating materials
GJB 8697.26-2015 Rifle grenade test methods Part 26: Burning temperature test of burning ammunition column

American Welding Society (AWS), Pre-sintering temperature

AWS PHSS WC& DC-1996 Suggested Pretemperatures for Welding Structural Steel Materails Wall and Desk Charts
WRC 147:1970(1976) Transition-Temperature Data for Five Structural Steels

VN-TCVN, Pre-sintering temperature

TCVN 4645-1988 Sintered materials.Determination of hardness
TCVN 4646-1988 Sintered materials.Method for testing impact strength
TCVN 4648-2009 Sintered metal bushes.Determination of radial crushing strength

SAE - SAE International, Pre-sintering temperature

SAE AMS7910-1992 Beryllium Near-Net Preforms Standard Grade Cold Isostatic Pressed@ Sintered
SAE AMS7725B-1987 Tungsten Alloy Shapes@ Sintered@ High Density
SAE AMS7725C-2000 Tungsten Alloy Shapes@ Sintered@ High Density
SAE AMS3656C-1978 Polytetrafluoroethylene Extrusions Normal Strength@ As Sintered@ Radiographically Inspected

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Pre-sintering temperature

ASHRAE NA-04-8-4-2004 Predicting Indoor Temperature and Humidity Conditions Including Hygrothermal Interactions with the Building Envelope

Professional Standard - Aerospace, Pre-sintering temperature

QJ 2036-1991 Propellant combustion product temperature coefficient
QJ 2302-1992 Method for measuring internal temperature of ablative materials
QJ 1138-1987 Ablation of silicon-based materials—calculation method of temperature field

RO-ASRO, Pre-sintering temperature

STAS 9472/3-1974 Sinter hard alloys DETERMINATION OF DENSITY
STAS 9472/8-1975 Sintered hard alloys VICKERS HARDNESS TESTING
STAS SR ISO 2795:1996 Plain bearings - Sintered bushes -Dimensions and tolerances
STAS 8265-1979 Sintered metal powder products EST OF THE TRANSVERSE RUPTURE STRENGTH
STAS SR EN 23369-1995 Impermeable sintered metal materials and hardmetals. Determination of density
STAS 10101/23-1975 Actions upon structures LOADS DUE TO THE EXTERNAL TEMPERATURE
STAS SR ISO 2738:1994 Permeable sintered metal materials - Determination of density, oil content, and open porosity
STAS 6877/9-1976 ELECTRICAL EQUIPMENTS FOR EXPLOSIVE ATMOSPHERES Determination of ignition tcmperature of gases and. vapours

BE-NBN, Pre-sintering temperature

NBN 545.05-1959 Liquid thermometer placed in test beaker, thermometer scale protected, long type
NBN 545.04-1959 Liquid thermometer in test beaker, thermometer scale protected, short version
NBN 545.03-1959 Liquid thermometer placed in test beaker, thermometer placed on benchmark, long type
NBN 545.02-1959 Liquid thermometer placed in a test beaker, thermometer placed on a benchmark, short type
NBN-ISO/TR 9492:1993 Bases for design of structures. Temperature climatic actions
NBN 545.01-1959 Liquid thermometer placed in a test beaker, under normal conditions

Tianjin Provincial Standard of the People's Republic of China, Pre-sintering temperature

DB12/T 779-2018 Technical specification for high temperature sintering disposal of household waste incineration fly ash to produce ceramsite

Military Standards (MIL-STD), Pre-sintering temperature

DOD A-A-51009-1985 CAUTERY, OPHTHALMIC, BATTERY-OPERATED, LOW TEMPERATURE

SE-SIS, Pre-sintering temperature

SIS SS 11 70 11-1979 Sintered steel — Determination of case hardened depth
SIS 11 22 52-1974 Sintered metal bushes. Determination of radial crushing strength
SIS 16 22 21-1974 Rubber. Determination of temperature of retraction after freezing
SIS SS 11 70 11-1982 Powder metallurgy - Sintered steel - Determination of case hardened depth
SIS SS 11 26 17-1982 Powder metallurgy — Sintered metal materials — Determination of transverse rupture strength

Association of German Mechanical Engineers, Pre-sintering temperature

VDI/VDE 3511 Blatt 4.2-2014 Temperature measurement in industry - Radiation thermometry - Maintenance and intended operation of radiation thermometers
DVS 1703-1984 Recommendations for the selection of the workpiece temperature in the arc welding of steel structures of St 52

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Pre-sintering temperature

ASHRAE 4492-2001 Relative Humidity and Temperature Measurements and Predictions in Supermarkets
ASHRAE 4139-1998 A Simple Methodology to Predict Local Temperature and Humidity
ASHRAE 3763-1994 Predicting the Temperature@ Humidity@ Pressure@ and/or Density Effects on Velocity Instrumentation
ASHRAE 3630-1993 Simplified Model for Predicting Vertical Temperature Distribution in a Large Space
ASHRAE 4716-2004 Effect of Boundary Condition on the Prediction of Temperature Distribution for Curtain Walls
ASHRAE CH-93-2-1993 Heat Transfer Psychrometrics and Coil Frosting at Freezer Temperatures
ASHRAE AC-02-10-1-2002 Economic Assessment of Low Firing Temperature Absorption Chiller Systems
ASHRAE 4401-2000 Air Temperature Depression and Potential Icing at the Inlet of Stationary Combustion Turbines (RP-1019)
ASHRAE CH-03-10-1-2003 THERM Simulations of Window Indoor Surface Temperatures for Predicting Condensation
ASHRAE SE-99-12-03-1999 New Approach to Edge-Glass Temperature Prediction and its Application to Predicting Thermal Breakage in Insulated Glazing Units
ASHRAE 3955-1996 Application of an Unsteady-State Model for Predicting Vertical Temperature Distribution to an Existing Atrium
ASHRAE TO-98-23-4-1998 Prediction of Short-Term and Long-Term VOC Emissions from SBR Bitumen-Backed Carpet under Different Temperatures

Underwriters Laboratories (UL), Pre-sintering temperature

UL 1709-2005 UL Standard for Safety Rapid Rise Fire Tests of Protection Materials for Structural Steel Third Edition, Reprint with Revisions Through and Including April 6, 2007

未注明发布机构, Pre-sintering temperature

JIS M 8711:2023 Iron ore sinter -- Determination of shatter strength
NF E25-801-2*NF EN 14399-2:2015 High-strength structural bolting assemblies for preloading - Part 2 : suitability for preloading

IN-BIS, Pre-sintering temperature

IS 4841-1982 Method for determination of density of sintered metal materials
IS 8154-1993 Preformed calcium silicate insulation (for temperatures up to 650 degree). Specification (First Revision)
IS 9428-1993 Preformed calcium silicate insulation (for temperature up to 950 degree). Specification (First Revision)
IS 10385-1982 Method for determination of radial compressive strength of sintered metal powder bearings

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Pre-sintering temperature

GJB 5494.26-2005 Test method of rifle grenade Part 26：Flame temperature determination of incendiary unit for combustion projectile

Professional Standard - Military and Civilian Products, Pre-sintering temperature

WJ 1905-1990 Determination of pyrotechnic combustion agent flame temperature by thermal radiation method

PL-PKN, Pre-sintering temperature

PN H04941-1986 Sintered metal materials Determination of radial crushing strength
PN H04942-1986 Sintered metal materials Determination of transverse rupture strength
PN H04937-1986 Sintered metal materials Tensile strenght and elongation determination
PN C04187-1993 Petroleum products. Predicting of bordeline pumping temperature (BPT) of engine oils
PN B13045-01-1989 Laboratory sintered filters Porosity grading, classification and designation
PN C89425-1992 Plastics. Determination of melting temperature of semi-crystalline polymers
PN C45301-08-1993 Caprolactam. Method of test. Determination of crystalizing point

Professional Standard - Ferrous Metallurgy, Pre-sintering temperature

YB/T 5166-1993 Determination of drum strength of sinter and pellets

Jiangsu Provincial Standard of the People's Republic of China, Pre-sintering temperature

DB32/T 3878-2020 Technical specification for application of solid waste sintered non-load-bearing self-insulating blocks (bricks)
DB32/T 4132-2021 Application specification for urban and rural sludge (silt) sintered energy-saving brick self-insulating wall system

AGMA - American Gear Manufacturers Association, Pre-sintering temperature

P149.03-1983 Prediction of the Peak Temperature on the Surface of Thermoplastic Gear Teeth

ZA-SANS, Pre-sintering temperature

SANS 471:2003 Rubber - Temperatures, humidities and times for conditioning and testing
SANS 1445-3:1990 Thermal insulation materials for industrial applications Part 3: Bonded preformed mineral fibre pipe sections
SANS 1445-3:2008 Thermal insulation materials for industrial applications Part 3: Bonded preformed mineral fibre pipe sections

Professional Standard - Non-ferrous Metal, Pre-sintering temperature

YS/T 1009-2014 Sintered metal porous materials.Determination of shear strength
YS/T 1010-2014 Test method for ring tensile strength of sintered porous metal
YS/T 485-2005 Sintered bimetal material-Determination of shear strength
YS/T 516-2012 Determination method for secondary recrystallization temperature of tungsten wire
YS/T 516-2006 Measuring method of secondary recrystallization temperature of tungsten wire
YS/T 63.22-2009 Carbonaceous materials used in the production of aluminium.Part 22:Determination of baking level expressed by equivalent temperature

TR-TSE, Pre-sintering temperature

TS 2306-1976 Sintered Metal Bushes - Determination Of Radiol CrnshingStrength
TS 2305-1976 PERMEABLE SINTERED METAL MATERIALS DETERMINATION OF DENSITY AND OPEN POROS?TY

KR-KS, Pre-sintering temperature

KS D ISO 2739-2011 Sintered metal bushes－Determination of radial crushing strength
KS M ISO 10146-2019 Crosslinked polyethylene(PE-X) pipes — Effect of time and temperature on the expected strength
KS D ISO 2738-2011 Sintered metal materials, excluding hardmetals－Permeable sintered metal materials－Determination of density, oil content and open porosity
KS D ISO 3369-2011 Impermeable sintered metal materials and hardmetals－Determination of density
KS D ISO 4498-2010 Sintered metal materials, excluding hardmetals－Determination of apparent hardness and microhardness
KS M ISO 4589-2-2022 Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
KS M ISO 4589-2-2016 Plastics－Determination of burning behaviour by oxygen index－Part 2：Ambient-temperature test

American National Standards Institute （ANSI), Pre-sintering temperature

ANSI/UL 1709-2007 Standard for Rapid Rise Fire Tests of Protection Materials for Structural Steel (Proposals dated 12-22-06)
ANSI/UL 1709-2005 Standard for Safety for Rapid Rise Fire Tests of Protection Materials for Structural Steel

AWS - American Welding Society, Pre-sintering temperature

PHSS WC & DC-1996 Suggested Pretemperatures for Welding Structural Steel Materails Wall and Desk Charts

BR-ABNT, Pre-sintering temperature

ABNT EB-221-1970 Prefabricated calcium silicon thermal insulator, suitable for temperatures up to 650 °C

WRC - Welding Research Council, Pre-sintering temperature

BULLETIN 147-1970 TRANSITION-TEMPERATURE DATA FOR FIVE STRUCTURAL STEELS
BULLETIN 148-1970 TRANSITION-TEMPERATURE DATA FOR FIVE STRUCTURAL STEELS

Professional Standard - Water Conservancy, Pre-sintering temperature

SL 237-036-1999 Code for test of soil - freezing temperature test

Professional Standard - Building Materials, Pre-sintering temperature

JC/T 796-2013 The method of evaluating the fired common brick strength grading by rebound hammer
JC/T 796-1999 The method of evaluating the fired common brick strength grading by rebound hammer

IT-UNI, Pre-sintering temperature

UNI 7932-1979 Powder metallurgy. Determination of anti-deformation strength. Sintered metal materials
EC 1-2021 UNI EN 13791-2021 Assessment of in-situ compressive strength in structures and precast concrete components

未注明发布机构, Pre-sintering temperature

JIS M 8711:2023 Iron ore sinter -- Determination of shatter strength
NF E25-801-2*NF EN 14399-2:2015 High-strength structural bolting assemblies for preloading - Part 2 : suitability for preloading

Anhui Provincial Standard of the People's Republic of China, Pre-sintering temperature

DB34/T 1749-2012 Ethylene cracking furnace tube temperature safety monitoring and early warning system

CU-NC, Pre-sintering temperature

NC 33-67-1987 Oil Industry. Fuels for Engines Determination of Roilling Temperatures, Crystallization Start and Crystallization

The American Road & Transportation Builders Association, Pre-sintering temperature

AASHTO T 317-2004 Standard Method of Test for Prediction of Asphalt-Bound Pavement Layer Temperatures

Professional Standard - Machinery, Pre-sintering temperature

JB/T 7378-2010 Metallographic method of measurment on the carbunitrided harden case depth of sintering iron-based material

Professional Standard - Nuclear Industry, Pre-sintering temperature

EJ/T 787-1993 Inspection method for external dimensions and roughness of sintered uranium dioxide pellets

(U.S.) Ford Automotive Standards, Pre-sintering temperature

FORD S-M10A1013-A-2003 SINTER STEEL, MEDIUM STRENGTH, COPPER CONTAINING ***TO BE USED WITH FORD WSS-M99P1111-A***

YU-JUS, Pre-sintering temperature

JUS C.A2.041-1990 Perneable sintered metal materials. Determinaticm of densitj, oil content and open porosity

NL-NEN, Pre-sintering temperature

NEN-ISO 3369:1993 Impermeable sintered metal materials and hardmetals. Determination of density (ISO 3369:1975)