ZH
RU
ES

Three times the standard deviation calculation

Three times the standard deviation calculation, Total:55 items.

In the international standard classification, Three times the standard deviation calculation involves: Particle size analysis. Sieving, Optics and optical measurements, Paper and board, Quality, Thermodynamics and temperature measurements, Equipment for the chemical industry, Petroleum, petroleum products and natural gas handling equipment, Applications of information technology, Technical drawings, Linear and angular measurements.

American Society for Testing and Materials (ASTM), Three times the standard deviation calculation

• ASTM E2578-07(2012) Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
• ASTM D2244-23 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
• ASTM D2244-09a Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
• ASTM D2244-93(2000) Standard Test Method for Calculation of Color Differences From Instrumentally Measured Color Coordinates
• ASTM D2244-21 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
• ASTM D2244-22 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
• ASTM D2244-15e1 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
• ASTM D2244-07e1 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
• ASTM D2244-09 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
• ASTM D2244-15 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
• ASTM D2244-15a Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
• ASTM D2244-16 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
• ASTM D2244-07 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
• ASTM D2244-09b Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
• ASTM D2244-11 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
• ASTM E2022-99 Standard Practice for Calculation of Weighting Factors for Tristimulus Integration
• ASTM E2022-01 Standard Practice for Calculation of Weighting Factors for Tristimulus Integration
• ASTM E2022-06e1 Standard Practice for Calculation of Weighting Factors for Tristimulus Integration
• ASTM E2022-08 Standard Practice for Calculation of Weighting Factors for Tristimulus Integration
• ASTM E2022-16(2021) Standard Practice for Calculation of Weighting Factors for Tristimulus Integration
• ASTM E2022-06 Standard Practice for Calculation of Weighting Factors for Tristimulus Integration
• ASTM E2578-07(2018) Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
• ASTM E2578-07(2022) Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
• ASTM D2244-14 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
• ASTM E2578-07 Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
• ASTM D2244-02 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
• ASTM D2244-02e1 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
• ASTM D2244-05 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
• ASTM E2022-11 Standard Practice for Calculation of Weighting Factors for Tristimulus Integration
• ASTM E122-99 Standard Practice for Calculating Sample Size to Estimate, With a Specified Tolerable Error, the Average for Characteristic of a Lot or Process
• ASTM E122-00 Standard Practice for Calculating Sample Size to Estimate, With a Specified Tolerable Error, the Average for Characteristic of a Lot or Process
• ASTM E122-17(2017) Standard Practice for Calculating Sample Size to Estimate, With a Specified Tolerable Error, the Average for Characteristic of a Lot or Process
• ASTM E2041-23 Standard Test Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method

API - American Petroleum Institute, Three times the standard deviation calculation

• API MPMS 12.2.2 ADD 1-2007 Manual of Petroleum Measurement Standards Chapter 12—Calculation of Petroleum Quantities (Third Edition)
• API MPMS 12.2.2-2013 Manual of Petroleum Measurement Standards Chapter 12-Calculation of Petroleum Quantities Section 2-Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 2-Measurement Tickets (THIRD EDITION)
• API MPMS 12.2.2-2003 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 2 - Measurement Tickets (Third Edition)
• API MPMS 12.1.1 -2012 API Manual of Petroleum Measurement Standards Chapter 12.1.1 EI Hydrocarbon Management HM 1 Part 1 Calculation of Static Petroleum Quantities—Upright Cylindrical Tanks and Marine Vessels (Third Edition; ERTA: May 2015)

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Three times the standard deviation calculation

• IEEE P1838/D1-2019 Draft Standard for Test Access Architecture for Three-Dimensional Stacked ICs (IEEE Computer Society)
• IEEE C63.6-1988 Standard for Electromagnetic Compatibility - Open - Area Test Site Measurements - Guide for the Computation of Errors
• IEEE C63.6-1996 American National Standard Guide for the Computation of Errors in Open-Area Test Site Measurements

Institute of Electrical and Electronics Engineers (IEEE), Three times the standard deviation calculation

• ANSI Std C63.6-1996 American National Standard Guide for the Computation of Errors in Open-Area Test Site Measurements
• IEEE/ANSI C63.6-1996 American National Standard Guide for the Computation of Errors in Open-Area Test Site Measurements
• SMPTE ST 2085:2015 ST 2085:2015 - SMPTE Standard - Y′D′ - D′ - Color-Difference Computations for High Dynamic Range X′Y′Z′ Signals
• ST 2085:2015 ST 2085:2015 - SMPTE Standard - Y′D′ - D′ - Color-Difference Computations for High Dynamic Range X′Y′Z′ Signals
• ANSI Std C63.6-1988 American National Standard Guide for electromagnetic compatibility--open-area test site measurements--guide for the computation of errors
• IEEE/ANSI C63.6-1988 American National Standard Guide for electromagnetic compatibility--open-area test site measurements--guide for the computation of errors

IT-UNI, Three times the standard deviation calculation

• UNSIDER 14-1956

RU-GOST R, Three times the standard deviation calculation

• GOST R 52857.11-2007 Vessels and apparatus. Norms and methods of strength calculation. Method of strength calculation of shells and heads according to weld misalignment, angular misalignment and shell nonroundness

Association Francaise de Normalisation, Three times the standard deviation calculation

• NF E04-008:2021 Geometrical Product Specifications (GPS) - Tolerance allocation method, indications and acceptance criteria - Methods based on arithmetics, quadratic, semi-quadratic and inertial statistics
• NF E04-008:2013 Geometrical Product Specifications (GPS) - Tolerance allocation method, indications and acceptance criteria - Methods based on arithmetics, quadratic and inertial statistics

IX-EU/EC, Three times the standard deviation calculation

• M 244-1996 MANDATE TO CEN AND CENELEC FOR THE ELABORATION AND ADOPTION OF STANDARDS FOR TEST METHODS AND FOR THE MEASUREMENT, CALCULATION AND DESIGNATION OF EFFICIENCY OF GENERAL PURPOSE LOW VOLTAGE THREE PHASE INDUCTION ELECTRIC MOTORS

German Institute for Standardization, Three times the standard deviation calculation

• DIN V 4001-202:1989 CAD standard parts file; specifications of geometry and parameters; bolts with head, close tolerance, with plain sitting surface, with drive external by tool
• DIN V 4001-204:1990 CAD standard parts file; specifications of geometry and parameters; bolts with head, close tolerance, with plain sitting surface, with drive internal by tool
• DIN V 4001-201:1990 CAD standard parts file; specifications of geometry and parameters; head screws, with plain sitting surface, with drive internal by tool
• DIN V 4001-11:1992 CAD standard parts library; specification of geometrie and parameters; head screws, with plain sitting surface, with drive external by tool

Others:   Three times the standard deviation calculation, triple standard deviation method, Three standard deviations mean, three standard deviations, three times the standard deviation, Triple Standard Deviation Test, three standard deviations from the mean, Standard Deviation Calculation, Three times the standard deviation of the mean, How to calculate the standard deviation, three times the standard deviation, Three times the standard deviation of the mean, How to calculate triple standard deviation, Three standard deviations based on the mean, How to calculate several times the standard deviation, Three standard deviations mean, Calculate standard deviation.