ZH
RU
ES

triple standard deviation method

triple standard deviation method, Total:499 items.

In the international standard classification, triple standard deviation method involves: Optics and optical measurements, Optical equipment, Quality, Electronic tubes, Protection of and in buildings, Metrology and measurement in general, Meat, meat products and other animal produce, Products of the textile industry, Corrosion of metals, Organic chemicals, Test conditions and procedures in general, Thermodynamics and temperature measurements, Construction materials, Materials for aerospace construction, Sensory analysis, Lubricants, industrial oils and related products, Adhesives, Character sets and information coding, Applications of information technology, Vocabularies, Analytical chemistry, Occupational safety. Industrial hygiene, Packaging and distribution of goods in general, Packaging materials and accessories, Raw materials for rubber and plastics, Fuels, Standardization. General rules, Medical equipment, Information sciences. Publishing, Petroleum products in general, Components for aerospace construction, Iron and steel products, Measurement of force, weight and pressure, Earthworks. Excavations. Foundation construction. Underground works, Nuclear energy engineering, Plastics, Physics. Chemistry, Waxes, bituminous materials and other petroleum products, Road engineering, Soil quality. Pedology, Products of the chemical industry, Rubber, Protection against fire, Water quality, Welding, brazing and soldering, Wood-based panels, Elements of buildings, Paint ingredients, Food products in general, Electrical wires and cables, Measurement of volume, mass, density, viscosity, Paints and varnishes, Products of non-ferrous metals, Sports equipment and facilities, Wood, sawlogs and sawn timber, Solar energy engineering, Air quality, Electromagnetic compatibility (EMC).

FI-SFS, triple standard deviation method

SFS 5231-1986

PH-BPS, triple standard deviation method

PNS ASTM E1347:2021 Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry

American Society for Testing and Materials (ASTM), triple standard deviation method

ASTM E1347-06(2015) Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
ASTM E1347-06 Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
ASTM E1347-06(2011) Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
ASTM E766-14 Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
ASTM E1347-06(2020) Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
ASTM E1347-03 Standard Test Method for Color and Color-Difference Measurement by Tristimulus (Filter) Colorimetry
ASTM E1573-18 Standard Test Method for Measurement and Reporting of Masking Sound Levels Using A-Weighted and One-Third-Octave-Band Sound Pressure Levels
ASTM E1573-22 Standard Test Method for Measurement and Reporting of Masking Sound Levels Using A-Weighted and One-Third-Octave-Band Sound Pressure Levels
ASTM E1573-02 Standard Test Method for Evaluating Masking Sound in Open Offices Using A-Weighted and One-Third Octave Band Sound Pressure Levels
ASTM E1573-93(1998) Standard Test Method for Evaluating Masking Sound in Open Offices Using A-Weighted and One-Third Octave Band Sound Pressure Levels
ASTM G158-98(2004) Standard Guide for Three Methods of Assessing Buried Steel Tanks
ASTM D3444-00(2020) Standard Test Method for Total Acid Number of Trichlorotrifluoroethane
ASTM D3444-00(2015) Standard Test Method for Total Acid Number of Trichlorotrifluoroethane
ASTM E2164-08 Standard Test Method for Directional Difference Test
ASTM D3443-00(2005) Standard Test Method for Chloride in Trichlorotrifluoroethane
ASTM D3443-00 Standard Test Method for Chloride in Trichlorotrifluoroethane
ASTM D3443-00(2010) Standard Test Method for Chloride in Trichlorotrifluoroethane
ASTM D3444-00(2010)e1 Standard Test Method for Total Acid Number of Trichlorotrifluoroethane
ASTM D3448-85(2000) Standard Test Method for Specific Aqueous Conductance of Trichlorotrifluoroethane
ASTM D3443-00(2020) Standard Test Method for Chloride in Trichlorotrifluoroethane
ASTM D3448-10(2020) Standard Test Method for Specific Aqueous Conductance of Trichlorotrifluoroethane
ASTM D3443-00(2015) Standard Test Method for Chloride in Trichlorotrifluoroethane
ASTM E2164-01(2007) Standard Test Method for Directional Difference Test
ASTM E2164-16 Standard Test Method for Directional Difference Test
ASTM E967-18 Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM D3444-00 Standard Test Method for Total Acid Number of Trichlorotrifluoroethane
ASTM D3444-00(2005) Standard Test Method for Total Acid Number of Trichlorotrifluoroethane
ASTM E967-08(2014) Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM D4221-11 Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer
ASTM D1464-90(2002) Standard Test Method for Differential Dyeing Behavior of Cotton
ASTM D1464-07 Standard Test Method for Differential Dyeing Behavior of Cotton
ASTM E2164-01 Standard Test Method for Directional Difference Test
ASTM E3040-15 Standard Test Method for Evaluation of Instrumental Color Difference with a Gray Scale
ASTM D2616-12 Standard Test Method for Evaluation of Visual Color Difference With a Gray Scale
ASTM D3443-00(2010)e1 Standard Test Method for Chloride in Trichlorotrifluoroethane
ASTM F1110-09(2020) Standard Test Method for Sandwich Corrosion Test
ASTM E520-08(2023) Standard Practice for Describing Photomultiplier Detectors in Emission and Absorption Spectrometry
ASTM E968-02(2008) Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters
ASTM D1464-90(1996) Standard Test Method for Differential Dyeing Behavior of Cotton
ASTM E2610-08(2011) Standard Test Method for Sensory Analysismdash;Duo-Trio Test
ASTM D5770-02 Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
ASTM D5770-96 Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
ASTM D5770-02(2007) Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
ASTM E2004-99 Standard Test Method for Facing Cleavage of Sandwich Panels
ASTM G158-98(2021) Standard Guide for Three Methods of Assessing Buried Steel Tanks
ASTM E2004-18 Standard Test Method for Facing Cleavage of Sandwich Panels
ASTM G158-98(2016) Standard Guide for Three Methods of Assessing Buried Steel Tanks
ASTM G15-08 Standard Terminology Relating to Corrosion and Corrosion Testing
ASTM E2004-04 Standard Test Method for Facing Cleavage of Sandwich Panels
ASTM E2373-09 Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique
ASTM D2616-19 Standard Test Method for Evaluation of Visual Color Difference With a Gray Scale
ASTM E520-98 Standard Practice for Describing Photomultiplier Detectors in Emission and Absorption Spectrometry
ASTM E520-98(2003) Standard Practice for Describing Photomultiplier Detectors in Emission and Absorption Spectrometry
ASTM E928-03 Standard Test Method for Determination of Purity by Differential Scanning Calorimetry
ASTM E928-08(2014) Standard Test Method for Purity by Differential Scanning Calorimetry
ASTM D3448-10 Standard Test Method for Specific Aqueous Conductance of Trichlorotrifluoroethane
ASTM E2069-06(2018) Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
ASTM E2069-19 Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
ASTM E1885-97(2003) Standard Test Method for Sensory Analysis8212;Triangle Test
ASTM E1885-97 Standard Test Method for Sensory Analysis-Triangle Test
ASTM E1885-04 Standard Test Method for Sensory Analysis8212;Triangle Test
ASTM E2610-08 Standard Test Method for Sensory Analysisx2014;Duo-Trio Test
ASTM D4356-84(1996) Standard Practice for Establishing Consistent Test Method Tolerances
ASTM E928-19 Standard Test Method for Purity by Differential Scanning Calorimetry
ASTM E1269-11 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E2069-06 Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
ASTM E2069-00 Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
ASTM E2069-06(2012) Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
ASTM E2610-18 Standard Test Method for Sensory Analysis—Duo-Trio Test
ASTM E1885-18 Standard Test Method for Sensory Analysis—Triangle Test
ASTM E805-94 Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials
ASTM D3670-91(2001) Standard Guide for Determination of Precision and Bias of Methods of Committee D22
ASTM F1181-19 Standard Test Method for Measuring Binocular Disparity in Transparent Parts
ASTM E805-12a(2017) Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials
ASTM D4821-14 Standard Guide for Carbon Blackmdash;Validation of Test Method Precision and Bias
ASTM D3523-92(2002) Standard Test Method for Spontaneous Heating Values of Liquids and Solids (Differential Mackey Test)
ASTM D3523-92(2007) Standard Test Method for Spontaneous Heating Values of Liquids and Solids (Differential Mackey Test)
ASTM E1269-11(2018) Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM D2244-02 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-02e1 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-05 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D6045-04 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method
ASTM E2716-23 Standard Test Method for Determining Specific Heat Capacity by Modulated Temperature Differential Scanning Calorimetry
ASTM E1486-98(2004) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
ASTM E1543-00(2006) Standard Test Method for Noise Equivalent Temperature Difference of Thermal Imaging Systems
ASTM D4821-05 Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM E2253-03 Standard Method for Enthalpy Measurement Validation of Differential Scanning Calorimeters
ASTM F801-96 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
ASTM F801-96(2002) Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
ASTM E1311-89(1999) Standard Test Method for Minimum Detectable Temperature Difference for Thermal Imaging Systems
ASTM E1543-00 Standard Test Method for Noise Equivalent Temperature Difference of Thermal Imaging Systems
ASTM D4821-99 Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM D4821-01a Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM E2253-08e1 Standard Method for Enthalpy Measurement Validation of Differential Scanning Calorimeters
ASTM E1311-89(2010) Standard Test Method for Minimum Detectable Temperature Difference for Thermal Imaging Systems
ASTM F1181-09(2014) Standard Test Method for Measuring Binocular Disparity in Transparent Parts
ASTM E1543-00(2011) Standard Test Method for Noise Equivalent Temperature Difference of Thermal Imaging Systems
ASTM F1181-09 Standard Test Method for Measuring Binocular Disparity in Transparent Parts
ASTM F801-16 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
ASTM D3670-91(2022) Standard Guide for Determination of Precision and Bias of Methods of Committee D22
ASTM F801-21 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
ASTM D4821-15 Standard Guide for Carbon Black—Validation of Test Method Precision and Bias
ASTM D4821-16 Standard Guide for Carbon Black&x2014;Validation of Test Method Precision and Bias
ASTM D3670-91(2014) Standard Guide for Determination of Precision and Bias of Methods of Committee D22
ASTM D2244-14 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM C1505-01 Standard Test Method for Determination of Breaking Strength of Ceramic Tiles by Three-Point Loading
ASTM D5386-05 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
ASTM D5386-04 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
ASTM D6045-02 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method
ASTM D6045-96 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method
ASTM C1505-01(2007) Standard Test Method for Determination of Breaking Strength of Ceramic Tiles by Three-Point Loading
ASTM D5386-93b(2000)e1 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
ASTM D5386-16 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
ASTM D6045-12 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method
ASTM G158-98 Standard Guide for Three Methods of Assessing Buried Steel Tanks
ASTM G158-98(2010) Standard Guide for Three Methods of Assessing Buried Steel Tanks
ASTM D5311-11 Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil
ASTM E1356-03 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
ASTM E793-01 Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
ASTM E793-95 Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
ASTM E793-06(2018) Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
ASTM E2070-08 Standard Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods
ASTM E1356-08 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
ASTM E2070-03 Standard Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods
ASTM E2070-00 Standard Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods
ASTM D3670-91(1996)e1 Standard Guide for Determination of Precision and Bias of Methods of Committee D22
ASTM D3670-91(2007) Standard Guide for Determination of Precision and Bias of Methods of Committee D22
ASTM D4821-06 Standard Guide for Carbon Black-Validation of Test Method Precision and Bias
ASTM D4821-07 Standard Guide for Carbon Black-Validation of Test Method Precision and Bias
ASTM D4821-04 Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM D4821-01 Standard Guide for Carbon Black—Validation of Test Method Precision and Bias
ASTM D4821-03 Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM D4821-03a Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM D4821-19 Standard Guide for Carbon Black—Validation of Test Method Precision and Bias
ASTM D4821-20 Standard Guide for Carbon Black—Validation of Test Method Precision and Bias
ASTM D4821-07e1 Standard Guide for Carbon BlackValidation of Test Method Precision and Bias
ASTM E1573-09 Standard Test Method for Evaluating Masking Sound in Open Offices Using A-Weighted and One-Third Octave Band Sound Pressure Levels
ASTM C1215-92(1997) Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry
ASTM C1215-18 Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry
ASTM E2313-04 Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (Spectrophotometric Method)
ASTM D5386-10 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
ASTM D6045-12(2017) Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method
ASTM E2070-13 Standard Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods
ASTM E2041-03 Standard Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
ASTM E2041-99 Standard Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
ASTM E793-06 Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
ASTM D3418-03 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM F2469-10 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method
ASTM D3523-92(2012) Standard Test Method for Spontaneous Heating Values of Liquids and Solids (Differential Mackey Test)
ASTM E537-20 Standard Test Method for Thermal Stability of Chemicals by Differential Scanning Calorimetry
ASTM E2716-09 Standard Test Method for Determining Specific Heat Capacity by Sinusoidal Modulated Temperature Differential Scanning Calorimetry
ASTM D4419-90(2005) Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
ASTM D4419-90(2010) Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
ASTM D3418-08 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM E1356-08(2014) Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
ASTM E1356-23 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
ASTM D1721-97 Standard Test Method for Permanganate Time of Tricresyl Phosphate
ASTM D4954-89(1995)e1 Standard Test Method for Determination of Nitrilotriacetates in Detergents
ASTM D2042-01 Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene
ASTM D2042-97 Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene
ASTM D4767-02 Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils
ASTM D2042-09 Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene
ASTM D1468-93(1996) Standard Test Method for Volatile Matter in Tricresyl Phosphate
ASTM D7181-20 Standard Test Method for Consolidated Drained Triaxial Compression Test for Soils
ASTM D4954-89(2017) Standard Test Method for Determination of Nitrilotriacetates in Detergents
ASTM E1885-04(2011) Standard Test Method for Sensory AnalysisTriangle Test
ASTM D1468-93(2001) Standard Test Method for Volatile Matter in Tricresyl Phosphate
ASTM D2042-15 Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene
ASTM D3568-03(2009) Standard Test Methods for Rubber8212;Evaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including Mixtures With Oil
ASTM E177-90a(1996) Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM C609-90(1995) Standard Test Method for Measurement of Small Color Differences Between Ceramic Wall or Floor Tile
ASTM E177-04 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E177-06 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E177-04e1 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM D5225-98 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
ASTM D5225-98(2003) Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
ASTM C609-90(2000) Standard Test Method for Measurement of Small Color Differences Between Ceramic Wall or Floor Tile
ASTM E805-12a Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials
ASTM E177-19 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E177-20 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM D5225-22 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
ASTM C609-23 Standard Test Method for Measurement of Light Reflectance Value and Small Color Differences Between Pieces of Ceramic Tile
ASTM E2070-13(2018) Standard Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods
ASTM E2070-23 Standard Test Methods for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods
ASTM C78-00 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78-94 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78-02 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM D7716-11 Standard Test Method for Determination of Residual Methanol in Glycerin by Gas Chromatography
ASTM E2313-20 Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (using Spectrophotometry)
ASTM D6045-20 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method
ASTM C1510-01 Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry
ASTM E1858-03 Standard Test Method for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry
ASTM F2469-05 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method
ASTM E537-07 Standard Test Method for The Thermal Stability Of Chemicals By Differential Scanning Calorimetry
ASTM E928-01 Standard Test Method for Determination of Purity by Differential Scanning Calorimetry
ASTM E928-96 Standard Test Method for Determination of Purity by Differential Scanning Calorimetry
ASTM E928-08 Standard Test Method for Determination of Purity by Differential Scanning Calorimetry
ASTM E2041-01 Standard Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
ASTM E2160-04(2018) Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry
ASTM E2923-14(2019) Standard Practice for Longevity Assessment of Firestop Materials Using Differential Scanning Calorimetry
ASTM E2009-23 Standard Test Methods for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
ASTM E2009-08(2014)e1 Standard Test Methods for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
ASTM F2469-15 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method
ASTM C1510-01(2020) Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry
ASTM E537-02 Standard Test Method for The Thermal Stability Of Chemicals By Differential Scanning Calorimetry
ASTM E1858-08 Standard Test Method for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry
ASTM E537-12 Standard Test Method for The Thermal Stability of Chemicals by Differential Scanning Calorimetry
ASTM C1510-01(2016) Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry
ASTM E2160-23 Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry
ASTM E2092-00 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-04 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D5311-92(1996) Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil
ASTM D4012-81(2009) Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Water
ASTM D4954-89(2009) Standard Test Method for Determination of Nitrilotriacetates in Detergents
ASTM E2092-03 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18a Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D7106/D7106M-05(2015)e1 Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes
ASTM D4012-15 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Water
ASTM D5311-92(2004)e1 Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil
ASTM D5311/D5311M-13 Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil
ASTM D4012-23 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Water
ASTM F801-96(2008) Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
ASTM E805-01 Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials
ASTM E805-01a Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials
ASTM E1213-97(2009) Standard Test Method for Minimum Resolvable Temperature Difference for Thermal Imaging Systems
ASTM E805-12 Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials
ASTM E2253-16 Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
ASTM D5225-17 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
ASTM E177-10 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM D5225-09 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
ASTM E2036-01 Standard Test Method for Nitrogen Trichloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC)
ASTM E2036-99 Standard Test Method for Nitrogen Trichloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC)
ASTM E2409-04 Standard Test Method for Glycol Impurities in Mono-, Di-, Tri- and Tetraethylene Glycol (Gas Chromatographic Method)
ASTM D5350-95 Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Titration, Test Method A
ASTM D5350-95(2001) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Titration, Test Method A
ASTM D5350-95(2006) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Titration, Test Method A
ASTM E2409-08 Standard Test Method for Glycol Impurities in Mono-, Di-, Tri- and Tetraethylene Glycol (Gas Chromatographic Method)
ASTM D7249/D7249M-18 Standard Test Method for Facesheet Properties of Sandwich Constructions by Long Beam Flexure
ASTM D7249/D7249M-20 Standard Test Method for Facesheet Properties of Sandwich Constructions by Long Beam Flexure
ASTM E2313-15 Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (using Spectrophotometry)
ASTM E2092-23 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D3895-04 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
ASTM E2160-01 Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry
ASTM D3895-06 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
ASTM C1510-01(2007) Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry
ASTM D3895-02 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
ASTM D3895-03 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
ASTM E2160-04 Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry
ASTM E1858-08(2015)e1 Standard Test Methods for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry
ASTM E2041-08e1 Standard Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
ASTM E2160-04(2012) Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry
ASTM D3895-14 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
ASTM E1486-98(2010) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
ASTM E1486-14 Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
ASTM D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D2943-02 Standard Test Method for Aluminum Scratch of 1,1,1-Trichloroethane to Determine Stability
ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D2943-96 Standard Test Method for Aluminum Scratch of 1,1,1-Trichloroethane to Determine Stability
ASTM D2943-02(2007) Standard Test Method for Aluminum Scratch of 1,1,1-Trichloroethane to Determine Stability
ASTM D2850-03a Standard Test Method for Unconsolidated-Undrained Triaxial CompressionTest on Cohesive Soils
ASTM D2850-03 Standard Test Method for Unconsolidated-Undrained Triaxial CompressionTest on Cohesive Soils
ASTM D2943-96(2000) Standard Test Method for Aluminum Scratch of 1,1,1-Trichloroethane to Determine Stability
ASTM D4406-93(1998) Standard Test Method for Creep of Cylindrical Rock Core Specimens in Triaxial Compression
ASTM D4012-81(2002) Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Water
ASTM D4012-81(1997) Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Water
ASTM D4406-04 Standard Test Method for Creep of Cylindrical Rock Core Specimens in Triaxial Compression
ASTM D7463-08 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures and Fuel Associated Water
ASTM D5023-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D8087-18 Standard Test Method for Color of Maleic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale) Using Tristimulus Colorimetry
ASTM D3523-92(1997) Standard Test Method for Spontaneous Heating Values of Liquids and Solids (Differential Mackey Test)
ASTM E805-06 Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials
ASTM E1269-05 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM C609-07 Standard Test Method for Measurement of Light Reflectance Value and Small Color Differences Between Pieces of Ceramic Tile
ASTM E2253-08 Standard Method for Enthalpy Measurement Validation of Differential Scanning Calorimeters
ASTM E126-92(1998) Standard Test Method for Inspection and Verification of Hydrometers
ASTM E1269-01 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E1269-99 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E1269-04 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM D4449-90(1999) Standard Test Method for Visual Evaluation of Gloss Differences Between Surfaces of Similar Appearance
ASTM E805-22 Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials
ASTM E2995-15a Standard Specification for ASTM Thermohydrometers with Integral Low-Hazard Thermometers
ASTM E177-13 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E2253-21 Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
ASTM E2253-11 Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
ASTM B754-17 Standard Test Method for Measuring and Recording the Deviations from Flatness in Copper and Copper Alloy Strip
ASTM C609-07(2014) Standard Test Method for Measurement of Light Reflectance Value and Small Color Differences Between Pieces of Ceramic Tile
ASTM D5225-14 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
ASTM D4449-15 Standard Test Method for Visual Evaluation of Gloss Differences Between Surfaces of Similar Appearance
ASTM D3895-07 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
ASTM E1858-97 Standard Test Method for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calirometry
ASTM E1858-00 Standard Test Method for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry
ASTM E2009-02 Standard Test Method for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
ASTM D4419-90(2000) Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
ASTM D4419-90(1995)e1 Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
ASTM C1510-01(2012) Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry
ASTM D4419-90(2015) Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
ASTM E2716-09(2014) Standard Test Method for Determining Specific Heat Capacity by Sinusoidal Modulated Temperature Differential Scanning Calorimetry
ASTM E2041-13e1 Standard Test Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
ASTM E2602-09(2015) Standard Test Methods for the Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry
ASTM F2469-20 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method
ASTM D4419-90(2021) Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
ASTM E2041-23 Standard Test Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
ASTM E1486-98 Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
ASTM C78/C78M-18 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-21 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM D4767-95 Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils
ASTM D2943-02(2012) Standard Test Method for Aluminum Scratch of 1,1,1-Trichloroethane to Determine Stability
ASTM F3545-22 Standard Test Method for Static Loading of Treestands, Climbing Sticks, and Tripod or Tower Stands
ASTM F3415-20 Standard Test Method for Triaxial Shear Strength and Cohesion of Equine Sports Surfaces
ASTM D4767-11(2020) Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils
ASTM D2850-15 Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils
ASTM C78/C78M-16 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM E3174-20 Standard Practice for Determination of Kinetic Reaction Model Using Differential Scanning Calorimetry
ASTM E3174-21 Standard Practice for Determination of Kinetic Reaction Model Using Differential Scanning Calorimetry
ASTM B754-10 Standard Test Method for Measuring and Recording the Deviations from Flatness in Copper and Copper Alloy Strip
ASTM E3174-19 Standard Practice for Determination of Kinetic Reaction Model Using Differential Scanning Calorimetry
ASTM E3174-22 Standard Practice for Determination of Kinetic Reaction Model Using Differential Scanning Calorimetry
ASTM E2923-13 Standard Practice for Longevity Assessment of Firestop Materials Using Differential Scanning Calorimetry
ASTM E2923-14 Standard Practice for Longevity Assessment of Firestop Materials Using Differential Scanning Calorimetry
ASTM D4449-15(2021) Standard Test Method for Visual Evaluation of Gloss Differences Between Surfaces of Similar Appearance
ASTM D6186-19 Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)
ASTM B754-22 Standard Test Method for Measuring and Recording the Deviations from Flatness in Copper and Copper Alloy Strip
ASTM D4591-97 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
ASTM D4591-01 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
ASTM D4591-07 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
ASTM E2009-08 Standard Test Method for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
ASTM D4591-07(2012) Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
ASTM E331-70(1975) Standard Test Method for Water Penetration Of Exterior Windows, Curtain Walls, And Doors By Uniform Static Air Pressure Difference
ASTM E2009-99 Standard Test Method for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
ASTM E2602-22 Standard Test Methods for Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry
ASTM E1858-23 Standard Test Methods for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry
ASTM E2602-09 Standard Test Method for the Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry
ASTM D4591-17 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
ASTM D5483-21 Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
ASTM E793-06(2012) Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
ASTM D6186-08(2013) Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)
ASTM E2036-07 Standard Test Method for Nitrogen Trichloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC)
ASTM D1635-00(2006) Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
ASTM D1635-00 Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
ASTM D5352-95(2006) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride Ash-Gravimetric, Test Method C
ASTM D5352-95 Standard Test Method for Determination of Organically Combined Sulfuric Anhydride Ash-Gravimetric, Test Method C
ASTM D5352-95(2001) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride Ash-Gravimetric, Test Method C
ASTM D1635/D1635M-12 Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
ASTM E2092-09 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2679-22 Standard Test Method for Acidity in Mono-, Di-, Tri- and Tetraethylene Glycol by Non-Aqueous Potentiometric Titration
ASTM E1486-14(2022) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
ASTM E1486M-14(2022) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria (Metric)
ASTM E1486M-98(2010) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria [Metric]
ASTM E1486M-14 Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria 40;Metric41;
ASTM D4446-02 Standard Test Method for Anti-Swelling Effectiveness of Water-Repellent Formulations and Differential Swelling of Untreated Wood When Exposed to Liquid Water Environments
ASTM D5351-93(2009) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Extraction Titration, Test Method B
ASTM D5320-96 Standard Test Methods for Determination of 1,1,1-Trichloroethane and Methylene Chloride Content in Stabilized Trichloroethylene and Tetrachloroethylene
ASTM D2850-95(1999) Standard Test Method for Unconsolidated-Undrained Triaxial CompressionTest on Cohesive Soils
ASTM E2694-11 Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids
ASTM D3765-03 Standard Test Method for Carbon Black8212;CTAB (Cetyltrimethylammonium Bromide) Surface Area
ASTM D3765-03a Standard Test Method for Carbon Black8212;CTAB (Cetyltrimethylammonium Bromide) Surface Area
ASTM D2850-03a(2007) Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils
ASTM E2694-09 Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids
ASTM D5202-91(1997) Standard Test Method for Determining Triaxial Compression Creep Strength of Chemical Grouted Soils
ASTM D5202/D5202M-16 Standard Test Method for Determining Triaxial Compression Creep Strength of Chemically Grouted Soils
ASTM E2694-21 Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids
ASTM E2694-16 Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids
ASTM D2042-22 Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene or Toluene
ASTM D3765-04 Standard Test Method for Carbon Black-CTAB (Cetyltrimethylammonium Bromide) Surface Area
ASTM C78/C78M-15a Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-15b Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM E1089-86(2001) Standard Test Method for Water Penetration of Flat Plate Solar Collectors by Uniform Static Air Pressure Difference
ASTM E1089-86(1995) Standard Test Method for Water Penetration of Flat Plate Solar Collectors by Uniform Static Air Pressure Difference
ASTM D3507-97(2000) Standard Test Methods for Penetration of Preservatives in Wood and for Differentiating Between Heartwood and Sapwood
ASTM E108-10 Standard Test Methods for Fire Tests of Roof Coverings
ASTM F733-09(2014) Standard Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method
ASTM E108-16 Standard Test Methods for Fire Tests of Roof Coverings
ASTM E1089-86(2007) Standard Test Method for Water Penetration of Flat Plate Solar Collectors by Uniform Static Air Pressure Difference
ASTM E330-90 Standard Test Method for Structural Performance of Exterior Windows, Curtain Walls, and Doors by Uniform Static Air Pressure Difference
ASTM D5483-02e1 Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
ASTM D5483-95 Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
ASTM D6186-98 Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)
ASTM E2268-04 Standard Test Method for Water Penetration of Exterior Windows, Skylights, and Doors by Rapid Pulsed Air Pressure Difference
ASTM D6186-98(2003)e1 Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)
ASTM E331-00 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
ASTM E1233-00 Standard Test Method for Structural Performance of Exterior Windows, Curtain Walls, and Doors by Cyclic Static Air Pressure Differential
ASTM E547-00 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference
ASTM E331-00(2009) Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
ASTM E547-00(2009) Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference
ASTM E330-79 Standard Test Method for Structural Performance Of Exterior Windows, Curtain Walls, And Doors By Uniform Static Air Pressure Difference
ASTM E2268-04(2011) Standard Test Method for Water Penetration of Exterior Windows, Skylights, and Doors by Rapid Pulsed Air Pressure Difference
ASTM E547-00(2016) Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference
ASTM D4591-22 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
ASTM D5483-05(2015) Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
ASTM D5483-05(2010) Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
ASTM D6186-08 Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)
ASTM E2313-21a Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (using Spectrophotometry)
ASTM D4623-02 Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method-USBM Borehole Deformation Gage
ASTM D4623-96 Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method-USBM Borehole Deformation Gage
ASTM E2313-21 Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (using Spectrophotometry)
ASTM D4623-16 Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method—Three Component Borehole Deformation Gauge
ASTM E1486M-98 Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria [Metric]
ASTM D6091-03 Standard Practice for 99 %/95 % Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error
ASTM E1486M-98(2004) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria [Metric]

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, triple standard deviation method

GB 25586-2010 National Food Safety Standard Food Additive Sodium Sesquicarbonate (Concentrated Crystal Soda)
GB/T 27023-2008 Methods of indicating conformity with standards for third-party certification systems
GB/T 5009.61-2003 Method for analysis of hygienic standard of products of tripolycyanamide for food packaging
GB/T 16132-1995 Standard method for determination of chloroform, trachloromethane in air of residential areas--Gas chromatography

British Standards Institution (BSI), triple standard deviation method

BS ISO 17258:2015 Statistical methods. Six Sigma. Basic criteria underlying benchmarking for Six Sigma in organisations
BS ISO 13053-1:2011 Quantitative methods in process improvement. Six Sigma. DMAIC methodology
BS ISO 13053-2:2011 Quantitative methods in process improvement. Six Sigma. Tools and techniques

Professional Standard - Electron, triple standard deviation method

SJ/Z 9012-1987 Standard test methods for photomultiplier tubes for scintillation counting

SE-SIS, triple standard deviation method

SIS SMS 1359-1950

RU-GOST R, triple standard deviation method

GOST 8.381-1980 State system for ensuring the uniformity of measurements. Standards. The ways of expressing the errors
GOST R ISO 17258-2015 Statistical methods. Quantitative methods in process improvement «Six Sigma». Benchmarking
GOST R ISO 13053-1-2013 Statistical methods. Methodology of improvement of processes ？Six sigma？. Part 1. DMAIC methodology
GOST 8.287-1978 State system for ensuring the uniformity of measurements. Standard portable dynamometers of the 3-rd grade. Methods and means of calibration
GOST R ISO 13053-1-2015 Statistical methods. Quantitative methods in process improvement «Six Sigma». Part 1. DMAIC methodology
GOST R ISO 13053-2-2013 Statistical methods. Methodology of improvement of processes ？Six sigma？. Part 2. Tools and techniques
GOST R ISO 13053-2-2015 Statistical methods. Quantitative methods in process improvement «Six Sigma». Part 2. Techniques
GOST R 50779.53-1998 Statistical methods. Acceptance sampling by variables for normal distribution. Part 1. Known standard deviation
GOST R ISO 8423-2011 Statistical methods. Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)

IX-FAO, triple standard deviation method

CODEX STAN 3-1995 Codex standard for canned salmon

Professional Standard - Agriculture, triple standard deviation method

1308兽药质量标准2017年版 Chinese Medicine Volume 1 Veterinary Drug Quality Standard Prescription Preparation and Single Herb Preparation Sanhua Rhubarb Galla Chinensis Powder

IT-UNI, triple standard deviation method

Korean Agency for Technology and Standards (KATS), triple standard deviation method

KS K 0044-2011 Standard tolerances for yarn spun on the woolen system
KS Q 0001-2010 Single sampling inspection plans by variables having desired operating characteristics(known standard deviation)
KS Q 0001-2013 Single sampling inspection plans by variables and attributes
KS A ISO/IEC GUIDE 23-2002(2022) Methods of indicating conformity with standards for third－party certification systems
KS T 1349-2011 Standard test methods for determining the effects of high altitude on packaging systems by vacuum method
KS K 0043-2006 Test method and standard tolerances for wool and wool blend fabrics
KS K 0043-1986 Test method and standard tolerances for wool and wool blend fabrics
KS A ISO/IEC GUIDE 23-2002(2017) Methods of indicating conformity with standards for third－party certification systems
KS A ISO/IEC GUIDE 23:2002 Methods of indicating conformity with standards for third－party certification systems
KS F 2498-2021 Standard test method for cyclic triaxial strength for evaluating soil liquefaction
KS B ISO 15626:2014 Non-destructive testing of welds — Time-of-flight diffraction technique(TOFD) — Acceptance levels

CN-STDBOOK, triple standard deviation method

图书 A-4647 Food Standards and Regulations (Third Edition)
图书 3-9678 Compilation of National Standards for Petroleum and Petroleum Products Test Methods 2020 (3)

ANSI - American National Standards Institute, triple standard deviation method

X9.65-2004 Triple Data Encryption Algorithm (TDEA)@ Implementation Standard

Taiwan Provincial Standard of the People's Republic of China, triple standard deviation method

CNS 13221-1993 Methods of Indicating Conformity with Standards for Third - Party Certification Systems
CNS 13219-1993 Code of Principles on Third - Party Certification Systems and Related Standards

CZ-CSN, triple standard deviation method

CSN 35 6107-1984 Standards of single- and three-phase watt-hour meters Methods of verification

American National Standards Institute （ANSI), triple standard deviation method

ANSI X9.65-2004 Triple Data Encryption Algorithm (TDEA), Implementation Standard
ASTM D7106/D7106M-05(2023) Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes
ANSI Z80.20-2004 Ophthalmics: Contact Lenses - Standard Terminology, Tolerances, Measurements and Physicochemical Properties
ANSI Z80.20-2010 Contact Lenses - Standard Terminology, Tolerances Measurements and Physiochemical Properties
ANSI/ASTM E2694:2016 Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, triple standard deviation method

GB/T 34002-2017 Microbeam analysis—Analytical transmission electron microscopy—Methods for calibrating image magnification by using reference materials having periodic structures

The American Road & Transportation Builders Association, triple standard deviation method

AASHTO HM-33-2013 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING Thirty-Third Edition
AASHTO HM-33 PT II-2013 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING - PART 2A TESTS Thirty-Third Edition
AASHTO HM-35-2015 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING AND AASHTO PROVISIONAL STANDARDS (Thirty-Fifth Edition)
AASHTO HM-34-2014 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING (Thirty-Fourth Edition)
AASHTO HM-34 PT 1A-2014 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING (Thirty-Fourth Edition)
AASHTO HM-34 PT 1B-2014 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING (Thirty-Fourth Edition)
AASHTO HM-34 PT 2A-2014 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING (Thirty-Fourth Edition)
AASHTO HM-34 PT 2B-2014 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING (Thirty-Fourth Edition)
AASHTO HM-35 PT 1B-2015 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING (Thirty-Fifth Edition)
AASHTO T 297-1994(R2007) Standard Method of Test for Consolidated, Undrained Triaxial Compression Test on Cohesive Soils
AASHTO HM-35 PT 2B-2015 Standard Specifications for Transportation Materials and Methods of Sampling and Testing and AASHTO Provisional Standards Part 2B (Thirty-Fifth Edition)
AASHTO HM-35 PT III-2015 Standard Specifications for Transportation Materials and Methods of Sampling and Testing and AASHTO Provisional Standards Part 3 (Thirty-Fifth Edition)
AASHTO HM-35 PT 2A-2015 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING and AASHTO Provisional Standards Part 2A (Thirty-Fifth Edition)

AASHTO - American Association of State Highway and Transportation Officials, triple standard deviation method

HM-33-2013 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING (Thirty-Third Edition)
HM-33 PT II-2013 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING - PART 2A TESTS (Thirty-Third Edition)
HM-33 PT I-2013 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING - PART 1A SPECIFICATIONS (Thirty-Third Edition)
HM-35-2015 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING AND AASHTO PROVISIONAL STANDARDS (Thirty-Fifth Edition)
HM-35 PT 1B-2015 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING (Thirty-Fifth Edition)
HM-34 PT 2A-2014 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING (Thirty-Fourth Edition)
HM-34 PT 1A-2014 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING (Thirty-Fourth Edition)
HM-34 PT 2B-2014 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING (Thirty-Fourth Edition)
HM-34-2014 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING (Thirty-Fourth Edition)
HM-34 PT 1B-2014 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING (Thirty-Fourth Edition)
HM-35 PT 2B-2015 Standard Specifications for Transportation Materials and Methods of Sampling and Testing and AASHTO Provisional Standards Part 2B (Thirty-Fifth Edition)
HM-35 PT 2A-2015 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING and AASHTO Provisional Standards Part 2A (Thirty-Fifth Edition)
HM-35 PT III-2015 Standard Specifications for Transportation Materials and Methods of Sampling and Testing and AASHTO Provisional Standards Part 3 (Thirty-Fifth Edition)

Military Standard of the People's Republic of China-General Armament Department, triple standard deviation method

GJB 7972-2012 Preparation method of tri-uranium octoxide isotopic reference materials

International Organization for Standardization (ISO), triple standard deviation method

ISO/IEC Guide 23:1982 Methods of indicating conformity with standards for third-party certification systems
ISO 18404:2015 Quantitative methods in process improvement - Six Sigma - Competencies for key personnel and their organizations in relation to Six Sigma and Lean implementation
ISO/IEC GUIDE 16:1978 Code of principles on third party certification systems and related standards
ISO 15626:2018 Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels
ISO 15626:2011 Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels

AENOR, triple standard deviation method

UNE 66523:1999 IN METHODS OF INDICATING CONFORMITY WITH STANDARDS FOR THIRD-PARTY CERTIFICATION SYSTEMS.

API - American Petroleum Institute, triple standard deviation method

API MPMS 10.2-2013 Manual of Petroleum Measurement Standards Chapter 10.2 Standard Test Method for Water in Crude Oil by Distillation (THIRD EDITION)
API RP 31-1967 RECOMMENDED PRACTICE AND STANDARD FORM FOR ELECTRICAL LOGS THIRD EDITION (R 1976) (WITHDRAWN)
API MPMS 10.9-2013 Manual of Petroleum Measurement Standards Chapter 10.9 Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration (Third Edition)

Professional Standard - Medicine, triple standard deviation method

YY/T 91049-1999 Third class category expansion variety method for medical devices standard literature

Fujian Provincial Standard of the People's Republic of China, triple standard deviation method

DB35/T 82.4-1997 Identification method and evaluation standard of resistance to rice borer

未注明发布机构, triple standard deviation method

YY 91049-1999 Expanded classification method for three-level categories of medical device standard documents

VN-TCVN, triple standard deviation method

TCVN 7775-2008 Methods of indicating conformity with standards for third-party certification systems

TH-TISI, triple standard deviation method

TIS 5023-2006 Methods of indicating conformity with standards for third.party certification systems
TIS 1203-1993 Standard test method for solubility of bituminous meterials in trichloroethylene

Association Francaise de Normalisation, triple standard deviation method

NF L48-111:1973 In-service interchangeability. Standard flanges, ISO metric thread profile and tolerances.
NF L48-110:1974 Standard flanges, ISO metric thread profile and B.N.A.E. tolerances. In-service interchangeability (rech.).

CU-NC, triple standard deviation method

NC 90-16-02-1989 Standards System for Metrological Assurance. Wow,Flutter and Drift Meters. Methods and Means of Verification

KR-KS, triple standard deviation method

KS F 2498-2021(英文版) Standard test method for cyclic triaxial strength for evaluating soil liquefaction

American Gear Manufacturers Association, triple standard deviation method

AGMA 2011-A98-1998 Cylindrical Wormgearing Tolerance and Inspection Methods Replacement of AGMA 390.03a

Standard Association of Australia （SAA）, triple standard deviation method

AS 2891.14.15:2018 Methods of sampling and testing asphalt, Method 14.15: Mean, standard deviation, coefficient of variation and characteristic values
HB 18.23-1991 Guidelines for third-party certification and accreditation - Guide 23 - Methods of indicating conformity with Standards for third-party certification systems
AS/NZS CISPR 16.4.1:2006 Specification for radio disturbance and immunity measuring apparatus and methods - Uncertainties, statistics and limit modelling - Uncertainties in standardized EMC tests

Canadian Standards Association (CSA), triple standard deviation method

CSA C22.2 No.2556-2021 Wire and cable test methods (Trinational standard with NMX-J-556-ANCE-2021 and UL 2556)

BE-NBN, triple standard deviation method

NBN-ISO 3443-7:1992 Tolerances for building - Part 7 : General principles for approval criteria, control of conformity with dimensional tolerance specifications and statistical control - Method 2 (Statistical control method)