a bending test

a bending test, Total:500 items.

In the international standard classification, a bending test involves: Fibre optic communications, Electrical wires and cables, Testing of metals, Leather technology, Construction materials, Wood, sawlogs and sawn timber, Mechanical testing, Raw materials for rubber and plastics, Linear and angular measurements, Surface treatment and coating, Structures of buildings, Materials for aerospace construction, Welding, brazing and soldering, Wood technology processes, Reinforced plastics, Pipeline components and pipelines, Iron and steel products, Road vehicle systems, Rubber and plastics products, Vibrations, shock and vibration measurements, Elements of buildings, Medical equipment, Glass, Analytical chemistry, Paint coating processes, Cellular materials, Equipment for entertainment, Solar energy engineering, Paints and varnishes, Plastics, Gears, Paper and board, Semiconducting materials, Medical sciences and health care facilities in general, Electrical accessories, Ceramics, Rubber, Products of the textile industry, Shipbuilding and marine structures in general, Wood-based panels, Footwear, Tyres, Conducting materials, Gas and steam turbines. Steam engines, Test conditions and procedures in general, Farming and forestry.

SAE - SAE International, a bending test

SAE ARP1321-1975 Flexure Testing of Bent Hydraulic Tubing
SAE ARP1321A-2000 Flexure Testing of Bent Hydraulic Tubing
SAE J1619-2017 Single Tooth Gear Bending Fatigue Test

Danish Standards Foundation, a bending test

DS 10310:1949 Testing of metals. Bend testing
DS 10311:1959 Testing of metals. Reverse bend testing of wire. (Determination of number of bends)
DS/EN ISO 7438:2005 Metallic materials - Bend test
DS/ISO 7438:2020 Metallic materials – Bend test
DS/EN 14617-2:2009 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
DS/EN 13523-7:2001 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
DS 1103.2:1976 Test methods for rigid flat sheets. Modulus of elasticity in bending and bending strength
DS/EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method
DS/EN ISO 17132:2007 Paints and varnishes - T-bend test
DS/EN 2746:1999 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
DS/EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests

SCC, a bending test

UNE 53204-1:2001 Cellular plastics, rigid. Flexural tests. Part 1: Bending test.
BS 3900-E1:1966 Methods of test for paints. Bend test
NZS 1011:1964 Methods for bend testing of metals
BS EN ISO 7438:2000 Metallic materials. Bend test
DANSK DS/ISO 7438:2020 Metallic materials – Bend test
BS 1639:1964 Methods for bend testing of metals
AS 2205.3.3:1988 Methods of destructive testing of welds in metal, Method 3.3: Bend tests - Longitudinal guided bend test
AS 2205.3.1:1988 Methods of destructive testing of welds in metal, Method 3.1: Bend tests - Transverse guided bend test
AS 2205.3.2:1988 Methods of destructive testing of welds in metal, Method 3.2: Bend tests - Transverse free bend test
AS 2205.3.1:1980 Methods of destructive testing of welds in metal, Part 3.1: Bend tests - Transverse guided bend test
AS 2205.3.2:1980 Methods of destructive testing of welds in metal, Part 3.2: Bend test - Transverse free bend test
AS 2205.3.3:1980 Methods of destructive testing of welds in metal, Part 3.3: Bend tests - Longitudinal guided bend test
NS-EN 2746:1998 Aerospace series — Glass fibre reinforced plastics — Flexural test — Three point bend method
NS 3277:1987 Particle boards — Test methods — Modulus of elasticity in bending and bending strength
NS 3252:1975 Test methods for rigid flat sheets — Modulus of elasticity in bending and bending strength
AS A106:1957 Australian standard method for the determination of the flexural strength of flexure test specimens
NS-EN 13523-7:2001 Coil coated metals — Test methods — Part 7: Resistance to cracking on bending (T-bend test)
NS-EN 13523-7:2021 Coil coated metals – Test methods – Part 7: Resistance to cracking on bending (T-bend test)
AS 2205.3.4:1980 Methods of destructive testing of welds in metal, Part 3.4: Bend tests - Transverse joggle-butt wrap-around bend test
AS 2205.3.5:1980 Methods of destructive testing of welds in metal, Part 3.5: Bend tests - Tongue bend test
VDI 3431-2016 Bending of profiles — Testing instructions for profile bent components
NS-EN ISO 7438:2005 Metallic materials — Bend test (ISO 7438:2005)
UNE-EN ISO 7438:2000 METALLIC MATERIALS. BEND TEST (ISO 7438:1985)
AS B126:1964 Notes on the simple bend test
AS B126:1954 Notes on the simple bend test
BS 1639:1950 Notes on the simple bend test
CSA S442.1-M1985-1985 Method of In-Grade Bending Tests of Lumber
NS-EN ISO 7438:2020 Metallic materials — Bend test (ISO 7438:2020)
AENOR UNE-EN ISO 7438:2021 Metal materials. Bending test. (ISO 7438:2020).
DANSK DS/EN ISO 17132:2007 Paints and varnishes - T-bend test
NS-EN ISO 7438:2000 Metallic materials — Bend test (ISO 7438:1985)
NS 3543:1987 Flexible sheets — Cold crack test by bending
BS 3900-E1:1970 Methods of test for paints-Bend test (cylindrical mandrel)
DANSK DS/EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
VDI 3431-2016 Bending of profiles — Testing instructions for profile bent components
12/30268961 DC BS EN 13523-7. Coil coated metals. Test methods. Part 7. Resistance to cracking on bending (T-bend test)
NS 8104:1980 General rules for testing of building products - Test of strength in bending
AASHTO T 285-1989(2023) Standard Method of Test for Bend Test for Bars for Concrete Reinforcement
DANSK DS/ISO 5173:2023 Destructive tests on welds in metallic materials – Bend tests
DIN 50142 E:2019 Draft Document - Testing of metallic materials - Flat bending fatigue test
DANSK DS/EN ISO 5173:2010 Destructive tests on welds in metallic materials – Bend tests
DANSK DS/EN ISO 5173/A1:2010 Destructive tests on welds in metallic materials – Bend tests
AS 2205.3.5:1997 Methods for destructive testing of welds in metal - Tongue bend test
DANSK DS/EN 910:1997 Destructive tests on welds in metallic materials - Bend tests
NS-EN 910:1996 Destructive tests on welds in metallic materials — Bend tests
UNE-EN 910:1996 DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS. BEND TESTS.
NS 3681:1986 Concrete testing - Hardened concrete - Core bending test
AS A106:1971 Method for the determination of the flexural strength of concrete flexure test specimens

American National Standards Institute （ANSI), a bending test

ANSI/TIA/EIA 455-88-2001 Fiber Optic Cable Bend Test
ANSI/TIA-455-104-A-1993 Fiber Optic Cable Cyclic Flexing Test
ANSI/TIA/EIA 455-91-1985 Fiber Optic Cable Twist-Bend Test
ANSI/EIA/TIA 455-37A:1993 Fiber Optic Cable Bend Test, Low and High Temperature
ANSI/TIA-455-37-A-1993 Low or High Temperature Bend Test
ANSI/TIA-455-104A-1993 Fiber Optic Cable Cyclic Flexing Test
ANSI/ASTM E290:1997 Test Methods for Bend Testing of Materials for Ductility
ANSI/TIA-455-37A-1993 Fiber Optic Cable Bend Test, Low and High Temperature
ANSI/ASTM D5342:1997 Test Method for Resistance to Bending of Paper and Paperboard (Taber-Type Tester in Basic Configuration)
ANSI/ASAE S459-1993 Shear and Three-Point Bending Test of Animal Bones

CZ-CSN, a bending test

CSN 42 0401-1978 Bend test of metals
CSN 42 0414-1963 Bend test on tubes
CSN ISO 7438:1994 Metallic materials.Bend test
CSN 05 6822-1984 Bending test of welded joints of plas-tics
CSN 34 7010 Cast.23-1990 Bending test for flexible ribbon cables
CSN 42 0422-1983 Reverse bend testing of wire
CSN ISO 8491:1994 Metallic materials.Tube in full section.Bend test
CSN ISO 7801:1994 Metallic materials. Wire. Reverse bend test
CSN 02 9041-1981 Compressed asbestos flat jointing. Bend test

PK-PSQCA, a bending test

PS 244-1964 BEND TEST FOR STEEL
PS 245-1963 REVERSE BEND TESTING OF STEEL WIRE
PS 1502-1981 METHOD FOR DETERMINATION OF BENDING TEST (RUBBER HOSE)

SE-SIS, a bending test

SIS SS 24 82 13-1979 Hose — Bending test
SIS SS 22 72 09-1983 Paving products — Bending test
SIS SS 11 26 27-1981 Steel — Reinforcing bar — Reverse bend testing
SIS 11 26 22-1969 Reverse bend testing of wire
SIS SS-ISO 6860:1990 Paints and varnishes — Bend test (conical mandrell)
SIS 11 26 26-1966 Bend testing of reinforcing steel bar

ZA-SANS, a bending test

SANS 5515:2007 Flexing test on flexible cords
SANS 7438:2003 Metallic materials - Bend test
SANS 7438:2009 Metallic materials - Bend test
SANS:5558 Flattening and doubling-over and double-bend tests on copper tube
SANS 7801:2003 Metallic materials - Wire - Reverse bend test
SANS 547:2006 Destructive tests on welds in metallic materials - Bend tests

International Organization for Standardization (ISO), a bending test

ISO/R 167:1960 Bend test on steel tubes
ISO/R 85:1959 Bend test for steel
ISO 5402:2002 | IULTCS/IUP 20 Leather — Physical and mechanical tests — Determination of flex resistance by flexometer method
ISO 10065:1990 Steel bars for reinforcement of concrete - Bend and rebend tests
ISO 21914:2019 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
ISO 7438:2005 Metallic materials - Bend test
ISO 7438:2020 Metallic materials — Bend test
ISO 7438:1985 Metallic materials; Bend test
ISO 7438:2016 Metallic materials - Bend test
ISO 1209:1976 Rigid cellular plastics — Bending test
ISO 144:1973 Steel - Reverse bend testing of wire
ISO 17132:2007 Paints and varnishes - T-bend test
ISO/R 398:1964 Bend test for copper and copper alloys
ISO 22288:2006 | IULTCS/IUP 39 Leather — Physical and mechanical tests — Determination of flex resistance by the vamp flex method
ISO 1209-1:2007 Rigid cellular plastics - Determination of flexural properties - Part 1: Basic bending test
ISO 1143:1975 Metals; Rotating bar bending fatigue testing
ISO 1209-1:2004 Rigid cellular plastics - Determination of flexural properties - Part 1: Basic bending test
ISO 1519:2002 Paints and varnishes - Bend test (cylindrical mandrel)
ISO/CD 7801 Metallic materials — Wire — Reverse bend test
ISO 24266:2020 Footwear - Test methods for whole shoe - Flexing durability
ISO/DIS 7801:2023 Metallic materials — Wire — Reverse bend test
ISO 7801:1984 Metallic materials; Wire; Reverse bend test
ISO 1519:1973 Paints and varnishes; Bend test (cylindrical mandrel)

BE-NBN, a bending test

NBN 117.32-1963 Steel pipe bending test
NBN I-920-1968 Paints and varnishes. Cylindrical shaft bending test
NBN B 15-214-1984 Concrete test. Determination of bending resistance
NBN B 15-238-1992 Test on fiber thickened concrete. Prismatic test tube bending test

HU-MSZT, a bending test

MNOSZ 1423-1950 Plastic bending test
MSZ 1422-1969 Plastic testing, hard plastic bending testing

GM Europe, a bending test

GME8793-2003 Ermittlung von Pr眉fkr盲ften zur Biegeschwingpr眉fung von Kurbelwellen Determination of Test Forces for Bending Fatigue Test on Crankshafts English/German
GME 8793-2003 Determination of Test Forces for Bending Fatigue Test on Crankshafts
GME L-9B-3-2007 Steering wheel alternating bending load test

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, a bending test

GB/T 4909.5-2009 Test methods for bare wires.Part 5:Bend test.Reverse bend test
GB/T 4909.6-2009 Test methods for bare wires.Part 6:Bend test.Single bend test
GB/T 244-2008 Metallic materials-tube.Bend test
GB/T 244-1997 Metallic materials--Tube--Bend test
GB/T 232-1999 Metallic materials--Bend test
GB/T 9341-2000 Plastics--Determination of flexural properties
GB/T 2833-1996 Test method for cross-bending strength of vitrified pipe
GB/T 2653-2008 Bend test methods on welded joints
GB/T 232-2010 Metallic materials.Bend test
GB/T 232-2024 Metallic materials - Bend test methods
GB/T 8364-2003 Test method for specific thermal deflection of thermostat metals
GB/T 12347-1996 Steel wire rope--Bending fatigue testing
GB/T 8364-2008 Test method of thermal flexure of thermostat metals
GB/T 12347-2008 Steel wire ropes.Bending fatigue testing
GB/T 16419-1996 Plastics--Determination of flexural properties by use of small specimens
GB/T 8812.1-2007 Rigid cellular plastics.Determination of flexural properties.Part 1:Basic bending test
GB/T 14230-1993 Standard of test methed for bending load capacity of gears
GB/T 6742-2007 Paints and varnishes.Bend test(cylindrical mandrel)
GB/T 24298-2009 Standard test method for cross curvature of thermostat metals
GB 6569-1986 Testing method for flexural strength of high performance ceramics
GB/T 11185-2009 Paints and varnishes.Bend test(conical mandrel)
GB/T 1456-2005 Test method for flexural properties of sandwich constructions
GB/T 6569-2006 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at room temperature
GB/T 14452-1993 Metallic materials. Determination of bending mechanical properties
GB/T 1965-1996 Test method for cross-bending strength of porous ceramic
GB/T 15825.5-1995 Sheet metal formability and test methods--Bending test
GB/T 4741-1999 Standard test method for bending strength of ceramic materials

CH-SNV, a bending test

SN 053 901/1-1989 Rubber condoms — Part 1: Quality testing of whole condoms

German Institute for Standardization, a bending test

DIN 52186:1978-06 Testing of wood; bending test
DIN 52186:1978 Testing of wood; bending test
DIN 52189-1:1981-12 Testing of wood; Impact bending test; Determination of impact bending strength
DIN 53293:1982-02 Testing of sandwiches; Bending test
DIN EN ISO 7438:2005 Metallic materials - Bend test (ISO 7438:2005); English version of DIN EN ISO 7438
DIN EN ISO 7438:2012 Metallic materials - Bend test (ISO 7438:2005); German version EN ISO 7438:2005
DIN EN ISO 7438:2021-03 Metallic materials - Bend test (ISO 7438:2020); German version EN ISO 7438:2020
DIN 52189-1:1981 Testing of wood; Impact bending test; Determination of impact bending strength
DIN 53453:1975 Testing of Plastics; Impact Flexural Test
DIN 53293:1982 Testing of sandwiches; Bending test
DIN EN 2746:1998-10 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN EN 13523-7:2001 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test); German version EN 13523-7:2001
DIN EN 14617-2:2016 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
DIN EN 13523-7:2022 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
DIN EN 13523-7:2022-01 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test); German version EN 13523-7:2021
DIN EN 13523-7:2020 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test); German and English version prEN 13523-7:2020
DIN EN ISO 17132:2008 Paints and varnishes - T-bend test (ISO 17132:2007); English version of DIN EN ISO 17132:2008-01
DIN EN ISO 8032:1999 Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (half-omega test) (ISO 8032:1997); German version EN ISO 8032:1999
DIN 50113:2018 Testing of metallic materials - Rotating bar bending fatigue test
DIN 50142:2019-09 Testing of metallic materials - Flat bending fatigue test
DIN EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method (ISO 22288:2006); English version of DIN EN ISO 22288:2009-04
DIN 50113:2018-12 Testing of metallic materials - Rotating bar bending fatigue test
DIN 53435:2018 Testing of plastics - Bending test and impact test on dynstat test specimens
DIN 53435:1983 Testing of plastics; bending test and impact test on dynstat test pieces
DIN EN ISO 1519:2003 Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2002); German version EN ISO 1519:2002
DIN EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998); German version EN ISO 8491:2004
DIN EN ISO 8491:2004-10 Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998); German version EN ISO 8491:2004
DIN EN 13523-7:2014 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test); German version EN 13523-7:2014
DIN EN ISO 5173:2012 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009 + Amd 1:2011); German version EN ISO 5173:2010 + A1:2011
DIN 51211:1978 Testing of Metallic Materials; Reverse Bend Test of Wires
DIN 50142:1982 Testing of metallic materials; Flat bending fatigue test

Association Francaise de Normalisation, a bending test

NF P18-407:1981 Concretes. Binding test.
NF B51-009:1985 Wood. Dynamic bending test.
NF A03-158:2005 Metallic materials - Bend test.
NF A03-158:2016 Metallic materials - Bend test
NF A03-158*NF EN ISO 7438:2020 Metallic materials - Bend test
NF EN 13523-7:2021 Pre-painted sheets - Test methods - Part 7: resistance to bending cracking (T-bend test)
NF A49-858:1988 Steel tubes. Bend test on test pieces taken from tubes.
NF T54-504:1976 Light plastics products. Bending test.
NF T37-001-7:2014 Coil coated metals - Test methods - Part 7 : resistance to cracking on bending (T-bend test)
NF T37-001-7*NF EN 13523-7:2021 Coil coated metals - Test methods - Part 7 : resistance to cracking on bending (T-bend test)
NF T30-105*NF EN ISO 17132:2007 Paints and varnishes - T-bend test
NF A03-402:1983 Iron and steel. Fatigue test by rotary flexion.
NF B10-602-2*NF EN 14617-2:2016 Agglomerated stone - Test methods - Part 2 : determination of flexural strength (bending)
NF A89-203/A1*NF EN ISO 5173/A1:2012 Destructive tests on welds in metallic materials - Bend tests.
NF A03-157:1978 IRON AND STEEL. BEND TEST ON STEEL.
NF P30-302:1963 Roofing. General details. Bend break test of corrugated sheet.
NF B30-101:1967 Glass. Bend test of a dual-glass test specimen.
NF ISO 4666-4:2018 Vulcanized rubber - Determination of temperature rise and fatigue resistance in flexometer testing - Part 4: constant stress flexometer
NF T30-040*NF EN ISO 1519:2011 Paints and varnishes - Bend test (cylindrical mandrel)
NF T30-040:1995 Paints and varnishes. Bend test (cylindrical mandrel).
NF A03-010:1986 Metallic materials. Wire. Reverse bend test.
NF B10-510:1973 QUARRY PRODUCTS. LIMESTONES. BENDING TEST.
NF EN ISO 17707:2005 Footwear - Test methods for outsoles - Flexural strength
NF P78-343*NF EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3 : test with specimen supported at two points (four points bending).
NF P19-829-5*NF EN 1170-5:1998 "Precast concrete products. Test method for glass-fibre reinforced cement. Part 5 : measuring bending strength, ""Complete bending test"" method.".
NF A89-203:1996 Destructive tests on welds in metallic materials. Bend tests.

RO-ASRO, a bending test

STAS 9416-1973 RUBBER HOSES Bending test
STAS 5540/7-1981 Tests of butt welded joints NOTCHED-BAR BEND TEST
STAS 5878-1977 Tests of metals ROTATING BAR BENDING FATIGUE TESTING
STAS 12054-1982 TESTING OF METALS BEND TEST OF ON FUSION WELDED PLATINGS
STAS IS0 8491-1992 Metallic materials. Tube (in full section). Bend test
STAS SR ISO 7801:1993 Metallic materials. Wire. Reverse bend test
STAS 5540/3-1981 Tests of butt welded joints UNNOTCHED-BAR BEND TEST
STAS 9892-1974 Teststs of metals reverse bend testing of copper and copper alloy WIRES
STAS 2080-1967 Metal technology testing. Bending tests of sheets and tapes
STAS 777-1988 Tests of metals BEXD TEST

Korean Agency for Technology and Standards (KATS), a bending test

KS B 5535-2003 Material testing machines－Bending－test machines
KS B 5535-1982 Material testing machines－Bending－test machines
KS D ISO 10065-2002(2007) Steel bars for reinforcement of concrete?Bend and rebend tests
KS M 3036-2016 Testing method of flexural fatigue of rigid plastics by plane bending
KS M 3036-2021 Testing method of flexural fatigue of rigid plastics by plane bending
KS D ISO 10065-2013 Steel bars for reinforcement of concrete ?Bend and rebend tests
KS D ISO 10065:2002 Steel bars for reinforcement of concrete &##8211;Bend and rebend tests
KS B 0861-2001 METHOD OF BEND TEST FOR BEAD WELDING
KS F 2208-1994 Method of Bending Test for Wood
KS B 0804-2001(2016) Metallic materials－Bend test
KS B 0804-2001(2021) Metallic materials－Bend test
KS F 2208-2020 Method of bending test for wood
KS B 0804-2001(2006) Metallic materials－Bend test
KS F 2208-1999 Method of bending test for wood
KS B 0861-1985 METHOD OF BEND TEST FOR BEAD WELDING
KS B 0804-2021 Metallic materials－Bend test
KS B 5535-2003(2018) Bending tester for material testing
KS B 0861-1971(1995) METHOD OF BEND TEST FOR BEAD WELDING
KS B 0803-1977(1995) BEND TEST SPECIMEN FOR METALS
KS F 2263-2021 Method of bending test for building boards
KS F 2263-1985 Method of bending test for building boards
KS B 0803-1985 BEND TEST SPECIMEN FOR METALS
KS M ISO 22288-2020 Leather－Physical and mechanical tests－Determination of flex resistance by the vamp flex method
KS M ISO 17132:2013 Paints and varnishes ㅡ T-bend test
KS T 0204-2016 Static bending test for corrugated paperboard
KS F 2211-1994 Method of Impact Bending Test for Wood
KS B 0529-2019 Method of bend test for stud welds
KS T 0204-2022 Static bending test for corrugated paperboard
KS F 2211-1999 Method of Impact Bending Test for Wood
KS M 5505-1983 Test methods for flexural stiffness of paint
KS M 3036-2016(2021) Testing method of flexural fatigue of rigid plastics by plane bending
KS M ISO 22288-2008(2013) Leather－Physical and mechanical tests－Determination of flex resistance by the vamp flex method
KS B 0844-2013 Method of bend test for T type fillet welded joint
KS M 6893-2002 Testing method for flexing endurance of light leathers and their surface finishes
KS M 3044-1988(1998) TESTING METHOD FOR FLEXURAL CREEP OF PLASTICS
KS B 0866-1971(1995) METHOD OF NOTCHED BEND TEST FOR BEAD WELDING
KS B ISO 8491-2001(2011) Metallic materials Tube(in full section) Bend test
KS M ISO 17132-2013(2018) Paints and varnishes ㅡ T-bend test
KS B 0862-1971(1995) METHOD OF NOTCHED BEND TEST FOR BEAD WELDING
KS F 2263-2005(2015) Method of bending test for boards of buildings
KS M 6893-1982 Testing method for flexing endurance of light leathers and their surface finishes
KS M 6893-1987 Testing method for flexing endurance of light leathers and their surface finishes
KS B 0862-1985 METHOD OF NOTCHED BEND TEST FOR BEAD WELDING
KS B 0844-1985 Method of bend test for T type fillet welded joint
KS B 0832-2001 Destructive tests on welds in metallic materials-Bend tests
KS B 0832-1985 Destructive tests on welds in metallic materials-Bend tests
KS M ISO 1209-1-2012(2017) Rigid cellular plastics－Determination of flexural properties－Part 1：Basic bending test
KS M ISO 1209-1-2012(2022) Rigid cellular plastics－Determination of flexural properties－Part 1：Basic bending test
KS M ISO 1209-1-2022 Rigid cellular plastics－Determination of flexural properties－Part 1：Basic bending test
KS L 1591-2013 Fine ceramics(advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramics at room temperature
KS M ISO 1519:2012 Paints and varnishes－Bend test(cylindrical mandrel)
KS B ISO 7801:2002 Metallic materials-Wire-Reverse bend test
KS L 1591-2008 Fine ceramics(advanced ceramics, advanced technical ceramics)-Test method for flexural strength of monolithic ceramics at room temperature
KS F 2159-2-2017 Method of bending test for structural wood-based panels
KS B 0836-2001 METHOD OF NOTCHED BEND TEST FOR BUTT WELDED JOINT
KS M ISO 17707-2006(2016) Footwear－Test methods for outsoles－Flex resistance
KS F 2159-1-2017 Method of bending test for nonstructural wood-based panels
KS L 1605-2013(2018) Testing method for bending creep of fine ceramics
KS B ISO 7801-2002(2012) Metallic materials－Wire－Reverse bend test
KS B ISO 7801:2015 Metallic materials－Wire－Reverse bend test
KS B ISO 1143-2003(2018) Rotating bar bending fatigue test for metallic materials
KS B 0834-1995 METHOD OF FREE BEND TEST FOR WELDED BUTT JOINT
KS B ISO 7801-2015 Metallic materials－Wire－Reverse bend test
KS L 1605-2023 Testing method for bending creep of fine ceramics
KS B ISO 5173:2021 Destructive tests on welds in metallic materials — Bend tests
KS B ISO 5173:2016 Destructive tests on welds in metallic materials－Bend tests
KS F 2395-2014 Standard test method for bend testing of asphalt mixtures
KS F 2395-2019 Standard test method for bend testing of asphalt mixtures

KR-KS, a bending test

KS B 5535-2003(2023) Bending tester for material testing
KS B 0804-2001(2021)(英文版) Metallic materials－Bend test
KS F 2159-1-2023 Method of bending test for nonstructural wood-based panels
KS B ISO 5173-2021 Destructive tests on welds in metallic materials — Bend tests
KS M ISO 4666-2-2015 Rubber, vulcanized－Determination of temperature rise and resistance to fatigue in flexometer testing－Part 2：Rotary flexometer
KS B ISO 5173-2016 Destructive tests on welds in metallic materials－Bend tests

British Standards Institution (BSI), a bending test

BS EN 13523-7:2014 Coil coated metals. Test methods. Resistance to cracking on bending (T-bend test)
BS EN 13523-7:2001 Coil coated metals - Test methods - Resistance to cracking on bending (T-bend test)
BS EN 2746:1998 Glass fibre reinforced plastics - Flexural test - Three point bend method
BS EN ISO 7438:2016 Metallic materials. Bend test
BS EN ISO 7438:2005 Metallic materials - Bend test
BS 1639:1964(1999) Methods for Bend testing ofmetals
BS EN ISO 17132:2007 Paints and varnishes - T-bend test
BS EN 13335:2002 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method
BS EN ISO 24266:2020 Footwear. Test methods for whole shoe. Flexing durability
18/30369869 DC BS EN ISO 7438. Metallic materials. Bend test
BS EN ISO 1519:2011 Paints and varnishes. Bend test (cylindrical mandrel)
18/30356322 DC BS ISO 21914. Test methods for fibre-reinforced cementitious composites. Bending moment-curvature curve by four-point bending test
BS EN 12814-1:2000 Testing of welded joints of thermoplastics semi-finished products - Bend test
BS EN 910:1996 Destructive tests on welds in metallic materials - Bend tests
BS EN 12814-1:2000(2003) Testing of welded joints of thermoplastics semi-finished products - Bend test
BS EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Test with specimen supported at two points (four point bending)
BS EN 12390-5:2000 Testing hardened concrete - Flexural strength of test specimens
BS EN 1876-1:1998 Rubber- or plastics-coated fabrics - Low temperature tests - Bending test
BS EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests
BS EN ISO 5173:2010+A1:2011 Destructive tests on welds in metallic materials. Bend tests

VN-TCVN, a bending test

TCVN 6287-1997 Steel bars for reinforcement of concrete.Bend and rebend tests
TCVN 198-2008 Metallic materials.Bend test
TCVN 2099-2013 Paints and varnishes.Bend test(cylindrical mandrel)
TCVN 1826-2006 Metallic materials.Wire.Reverse bend test
TCVN 5401-2010 Destructive tests on welds in metallic materials.Bend tests
TCVN 5891-2008 Metallic materials.Tube (in full section).Bend test

TH-TISI, a bending test

TIS 2173-2012 Metallic materials.bend test
TIS 2175-2004 Reverse bend test for metallic wire [iso title: metallic materials.wire.reverse bend test]

AT-ON, a bending test

ONORM M 3052-1997 Welding - Bending test for welded-on seams
OENORM EN 13523-7-2021 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
ONORM M 3052-1950 Welding Technology. Weld bend test
ONORM EN 10232-1994 Metallic materials. Tube (in full section). Bend test
OENORM EN ISO 7438:2021 Metallic materials - Bend test (ISO 7438:2020)

European Committee for Standardization (CEN), a bending test

EN ISO 7438:2000 Metallic Materials - Bend Test ISO 7438: 1985
EN ISO 7438:2020 Metallic materials - Bend test (ISO 7438:2020)
EN ISO 7438:2005 Metallic materials Bend test
EN ISO 17132:2007 Paints and varnishes - T-bend test
EN 13523-7:2001 Coil Coated Metals - Test Methods - Part 7: Resistance to Cracking on Bending (T-Bend Test)
EN 13523-7:2014 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
EN 13523-7:2021 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
EN 13335:2002 Leather - Physical and Mechanical Tests - Determination of Flex Resistance by the Vamp Flex Method
EN 910:1996 Destructive Tests on Welds in Metallic Materials - Bend Tests
EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
EN ISO 1519:1995 Paints and Varnishes - Bend Test (Cylindrical Mandrel) (ISO 1519:1973)
EN ISO 24266:2020 Footwear - Test methods for whole shoe - Flexing durability (ISO 24266:2020)
EN ISO 1519:2011 Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011)

RU-GOST R, a bending test

GOST 24167-1980 Brazing and soldering joint. Bend testing method
GOST R ISO 7438-2013 Mettallic materials. Bend test
GOST 4648-2014 Plastics. Method of static bending test
GOST 6806-1973 Paint and lacquer materials. Method for determination of film elasticity in bending
GOST 18564-1973 Rigid cellular plastics. Static bend test
GOST 1579-1993 Wire. Bend test method

IT-UNI, a bending test

UNI EN ISO 7438:2020 Metallic materials - Bend test
UNI 564-1960 Mechanical testing of metal materials. Bending test
UNI 6381-1968 Metal materials for aviation. Bending test

Japanese Industrial Standards Committee (JISC), a bending test

JIS Z 2248:2022 Metallic materials -- Bend test
JIS Z 2248:2006 Metallic materials -- Bend test
JIS K 7221-1:1999 Cellular plastics, rigid -- Flexural tests -- Part 1: Bending test
JIS Z 2204:1996 Bend test pieces for metallic materials
JIS Z 2248:1996 Method of bend test for metallic materials
JIS Z 3122:2013 Methods of bend test for butt welded joint
JIS Z 2248 AMD 1 R:2022 Metallic materials -- Bend test (Amendment 1)
JIS K 7221-1:2006 Rigid cellular plastics -- Determination of flexural properties -- Part 1: Basic bending test
JIS A 1106:1993 Method of test for flexural strength of concrete
JIS R 1612:2002 Testing method for bending creep of fine ceramics
JIS Z 2248 AMD 1:2014 Metallic materials.Bend test (Amendment 1)

ET-QSAE, a bending test

ES G.B8.311-1973 Steel wire reverse bending test

GSO, a bending test

GSO ISO 7438:2021 Metallic materials — Bend test
BH GSO ISO 7438:2022 Metallic materials — Bend test
GSO ISO 21914:2022 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
BH GSO ISO 21914:2023 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
GSO ISO 22288:2013 Leather -- Physical and mechanical tests -- Determination of flex resistance by the vamp flex method
OS GSO ISO 4666-3:2014 Rubber, vulcanized -- Determination of temperature rise and resistance to fatigue in flexometer testing -- Part 3: Compression flexometer
OS GSO ISO 1209-1:2015 Rigid cellular plastics -- Determination of flexural properties -- Part 1: Basic bending test
BH GSO ISO 1209-1:2017 Rigid cellular plastics -- Determination of flexural properties -- Part 1: Basic bending test
GSO ISO 4666-4:2014 Rubber, vulcanized -- Determination of temperature rise and resistance to fatigue in flexometer testing -- Part 4: Constant-stress flexometer
OS GSO ISO 4666-4:2014 Rubber, vulcanized -- Determination of temperature rise and resistance to fatigue in flexometer testing -- Part 4: Constant-stress flexometer
GSO ISO 1143:2015 Metallic materials -- Rotating bar bending fatigue testing
GSO ISO 7801:2015 Metallic materials -- Wire -- Reverse bend test
OS GSO ISO 7801:2015 Metallic materials -- Wire -- Reverse bend test
GSO ASTM F1874:2021 Standard Test Method for Bend Testing of Needles Used in Surgical Sutures
BH GSO ASTM F1874:2022 Standard Test Method for Bend Testing of Needles Used in Surgical Sutures

TR-TSE, a bending test

TS 281-1965 BEND TESTS ON FUSION VVELDED BUTT JOINTS AND FREE BEND TEST FOR DUCTILITY OF WELDS

Society of Automotive Engineers (SAE), a bending test

SAE ARP1321-1993 FLEXURE TESTING OF BENT HYDRAULIC TUBING
SAE J119-2005 Fiberboard Crease Bending Test
SAE J119-2010 Fiberboard Crease Bending Test
SAE J119-2019 Fiberboard Crease Bending Test
SAE J1619-1997 Single Tooth Gear Bending Fatigue Test

未注明发布机构, a bending test

DIN 53293:1976 Testing of sandwiches; Bending test
DIN EN 13523-7 E:2012-10 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
DIN EN ISO 7438 E:2015-06 Bending test of metallic materials (draft)
DIN EN ISO 7438 E:2018-04 Bending test of metallic materials (draft)
ANSI/ASAE S459-1992(2017) Shear and Three-Point Bending Test ofAnimal Bone
DIN EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests
ISO 5173:2023F Destructive tests on welds in metallic materials — Bend tests
DIN 50142 E:2019-01 Testing of metallic materials; Flat bending fatigue test
DIN 50142:1941 Testing of metallic materials; Flat bending fatigue test
DIN 51211:1961 Testing of Metallic Materials; Reverse Bend Test of Wires

Taiwan Provincial Standard of the People's Republic of China, a bending test

CNS 3940-1999 Bend test pieces for metallic materials
CNS 13976-1997 Method of test for flexural strength of dimensional stone
CNS 8527-1982 Method of Test for Flexural Fatigue of Rigid Plastics by Plane Bending
CNS 12690-1990 Mehtod of Test for Tent -- Testing for Bending Resistance of the Framework
CNS 3941-1999 Method of bend test for Metallic materials
CNS 3904-1986 Method of Bending Test for Boards of Buildings
CNS 13254-1993 Method of Bend Test for Stud Welds
CNS 13985-1997 Method of test for bending creep of fine ceramics
CNS 10017-1983 Method of Test for Bending Fatigue of Vulcanized Rubber
CNS 12674-1990 Method of Test for Roller Bend of Buff Welding Joint
CNS 12673-1990 Method of Test for Free Bend of Buff Welding Joint

工业和信息化部/国家能源局, a bending test

JB/T 13554-2018 Internal combustion engine crankshaft bending fatigue test method

GM North America, a bending test

GM GM9451P-2003 Test Procedure to Determine Warpage (Revision B)

Institute of Interconnecting and Packaging Electronic Circuits (IPC), a bending test

IPC TM-650 5.5.2.6-1998 Test Method 2.4.3 Flexural Endurance
IPC TM-650 5.5.2.5-1998 Test Method 2.4.3.1 Flexural Fatigue and Ductility

Professional Standard - Aviation, a bending test

HB 5184-1981 Metal pipe bending test method
HB 6140.4-1987 Test methods for formability of sheet metal - bend test
HB 5175-1996 Metal wire repeated bending test method
HB 5175-1981 Metal wire repeated bending test method

GOST, a bending test

GOST 1579-1980 Wire. Bend test method

Military Standards (MIL-STD), a bending test

DOD A-A-51942 A-1989 FORCEPS, THORACIC, CURVED, MIXTER [Use In Lieu Of: DOD A-A-0051942]

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, a bending test

GB/T 34171-2017 Test method for flexural property of thin and ultrathin glass—Three-point bending method

Professional Standard - Ferrous Metallurgy, a bending test

YB/T 5126-2003 Steel bars for reinforcement of concrete-Bend and rebend tests
YB/T 5126-1993 Steel bars for reinforcement of concrete-Bend and rebend tests
YB/T 5349-2006 Test methods for bending mechanical properties of metals
YB/T 5001-1993 Test method for double-layer occlusal bending of thin plates

Lithuanian Standards Office , a bending test

LST EN 14617-2-2008 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
LST EN 13523-7-2002 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
LST EN ISO 7438:2005 Metallic materials - Bend test (ISO 7438:2005)
LST EN ISO 7438:2020 Metallic materials - Bend test (ISO 7438:2020)
LST EN 2746-2001 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
LST EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method (ISO 22288:2006)

AENOR, a bending test

UNE-EN 13523-7:2014 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
UNE-ISO 1209-1:2011 Rigid cellular plastics. Determination of flexural properties. Part 1: Basic bending test

Group Standards of the People's Republic of China, a bending test

T/CSTM 00587-2023 Test method for flexural strength of crystalline silicon cells—Four-point flexural
T/CPMA 006-2019 Identification of Campylobacter jejuni and Campylobacter coli
T/QYSJLXH 003-2020 Technical specification for steel bar bending testing machine
T/CRIA 29001-2022 Tire crown bending modal test method

Professional Standard - Aerospace, a bending test

QJ 2533.9-1993 Small Combined Bending Die Component A Type Bending Punch
QJ 2531.1-1993 Type A Upper Die of Large Combination Bending Die Components
QJ 2531.4-1993 A-shaped top plate of large combined bending mold element
QJ 2533.5-1993 Small Combined Bending Die Component A Type Punch
QJ 2529.6-1993 Large combined bending die element A-type angle iron

(U.S.) Telecommunications Industries Association , a bending test

TIA/EIA-455-88-2001 FOTP-88 Fiber Optic Cable Bend Test
TIA-455-104-B-2016 FOTP-104 Fiber Optic Cable Cyclic Flexing Test
TIA-455-141-1999(2013) FOTP-141 Twist Test for Optical Fiber Ribbons
TIA-455-141-1999 FOTP-141 Twist Test for Optical Fiber Ribbons

American Society for Testing and Materials (ASTM), a bending test

ASTM F269-60(1996)e1 Standard Test Method for Sag of Tungsten Wire
ASTM F534-02 Standard Test Method for Bow of Silicon Wafers
ASTM D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-23 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D3043-00 Standard Test Methods for Testing Structural Panels in Flexure
ASTM F534-97 Standard Test Method for Bow of Silicon Wafers
ASTM D1098-61 Method of Static Bending Test for Corrugated Paperboard
ASTM F1874-98(2011) Standard Test Method for Bend Testing of Needles Used in Surgical Sutures
ASTM C120-06e1 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM C120-06 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM C120/C120M-09 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM D7914/D7914M-21 Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
ASTM D8058-19 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D2097-03(2023) Standard Test Method for Flex Testing of Finish on Upholstery Leather
ASTM D2097-03(2016) Standard Test Method for Flex Testing of Finish on Upholstery Leather

NO-SN, a bending test

NS 3543-1987 Flexible sheets - Cold crack test by bending

TIA - Telecommunications Industry Association, a bending test

TIA/EIA-455-104A-1993 FOTP-104 Fiber Optic Cable Cyclic Flexing Test

VE-FONDONORMA, a bending test

NORVEN 586-1971 Bending test of circular cross-section steel pipes
NORVEN 76-44-1966 Bend test in concrete pipe laboratory

VDI - Verein Deutscher Ingenieure, a bending test

VDI 3431-2014 Biegen von Profilen - Pruefhinweise fuer Biegebauteile aus Profilen

PL-PKN, a bending test

PN C89077-1973 Plastics Bending test for rigid cellular plastics
PN-EN ISO 7438-2021-04 E Metallic materials -- Bend test (ISO 7438:2020)
PN H04408-1990 Metals Bend test
PN E04160-25-1989 Electric cables Methods of testing Bending test for the flexible cables

GB-REG, a bending test

REG NACA-TN-3735-1956 Bending tests of ring-stiffened circular cylinders

国家市场监督管理总局、中国国家标准化管理委员会, a bending test

GB/T 244-2020 Metallic material—Tube—Bend test method
GB/T 37781-2019 Test methods for bending strength of glass
GB/T 1456-2021 Test method for flexural properties of sandwich constructions
GB/T 14230-2021 Test method of tooth bending strength for gear load capacity

IN-BIS, a bending test

IS 9399-1979 Specification for concrete bending testing apparatus
IS 10810 Pt.50-1984 Test methods for bending tests on electric cables Part 50

Canadian General Standards Board （CGSB), a bending test

CGSB 1-GP-71 METH 137.2-1978 Methodes D'Essai Des Peintures Et Pigments Essai Au Ruban Adhesif Feuils Plies

Professional Standard - Textile, a bending test

FZ/T 01054.4-1999 Test method for fabric style - Test method for bendability

Standard Association of Australia （SAA）, a bending test

AS 1580.402.1:2003(R2013) Test Methods for Paints and Related Materials Bend Test

Professional Standard - Chemical Industry, a bending test

HG/T 3840-2006 Plastics. Determination of flexural properties by use of small specimens

Professional Standard - Automobile, a bending test

QC/T 637-2000 Automobile engine crankshaft bending fatigue strength test method

Indonesia Standards, a bending test

SNI 07-4611-1998 Reverse bend test for metallic material wires

FI-SFS, a bending test

SFS 5426-1988 In case of interpretation disputes the Finnish text applies

Professional Standard-Ships, a bending test

CB/T 3351-2005 Methods of bend tests for shipbuilding welded joint
CB/T 3522-1993 Test method for transverse bending of marine steel pipes
CB/T 3522-2016 Test method for transverse bending of marine steel pipes

Professional Standard - Machinery, a bending test

JB/T 9374-2015 Pure bending fatigue testing machines.Technical specification
JB/T 9374-1999 Specifications for the rotary bending fatigue testing machines
JB/T 7131-2002 Standard test method for cross curvature of thermostat metals

Professional Standard - Agriculture, a bending test

GB/T 238-1984 Test method for repeated bending of metallic materials

Professional Standard - Railway, a bending test

TB/T 1354-1979 Rail bending fatigue test method

Professional Standard - Building Materials, a bending test

JC/T 676-1997 Test method for flexure of glass material
JC/T 263-1993 Performance test method for cast stone products. Bending strength test

工业和信息化部, a bending test

YB/T 4994-2022 Test method for bending properties of carbon materials

机械工业部, a bending test

JB/T 7131-1993 Hot bimetal transverse bend test method

CU-NC, a bending test

NC 04-17-1968 Bend test for steel

AASHTO - American Association of State Highway and Transportation Officials, a bending test

T285-1989 Standard Method of Test for Bend Test for Bars for Concrete Reinforcement
T 285-1989 Standard Method of Test for Bend Test for Bars for Concrete Reinforcement

ES-UNE, a bending test

UNE-EN ISO 5173:2011 ERRATUM:2011 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009)

Military Standard of the People's Republic of China-General Armament Department, a bending test

GJB 17.21-1984 Test methods for aviation wires and cables Low temperature bending test

The American Road & Transportation Builders Association, a bending test

AASHTO T 285-89(R2019) Standard Method of Test for Bend Test for Bars for Concrete Reinforcement

Liaoning Provincial Standard of the People's Republic of China, a bending test

DB21/T 2104-2013 Calibration procedure for metal wire repeated bending test machine