ZH
RU
ES
pre-carbonized
pre-carbonized, Total:97 items.
In the international standard classification, pre-carbonized involves: Materials for aerospace construction, Metalliferous minerals, Internal combustion engines, Environmental protection, Products of the chemical industry, Analytical chemistry, Water quality, Microbiology, Leather technology, Geology. Meteorology. Hydrology, Ceramics, Components for aerospace construction, Integrated circuits. Microelectronics, Surface treatment and coating, Wastes, Non-ferrous metals.
Society of Automotive Engineers (SAE), pre-carbonized
- SAE AMS3960-2011 Advanced Composites Prepreg - Nominal 250 °F Cure - Carbon Fiber and Epoxy Resin, Unidirectional Tape
- SAE AMS3970/3A-2016 Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 3 - Purchasing Specification for Carbon Prepreg
- SAE AS29513C-2021 PACKING, PREFORMED, HYDROCARBON FUEL RESISTANT, "O" RING
- SAE AMS3970/3A-2011 Carbon Fiber Fabric Repair Prepreg, 120°C (250°F) Vacuum Curing Part 3 - Purchasing Specification for Carbon Prepreg
- SAE AMS3970/2A-2011 Carbon Fiber Fabric Repair Prepreg, 120°C (250°F) Vacuum Curing Part 2 - Qualification Program for Fiber, Fabric, Carbon Prepreg, Film Adhesive and Non-Structural Glass Prepreg
- SAE AMS6885/3-2021 Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg, Vacuum Curing Part 3 - Purchasing Specification for Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg
- SAE AMS3970/2A-2016 Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 2 - Qualification Program for Fiber, Fabric, Carbon Prepreg, Film Adhesive and Non-Structural Glass Prepreg
- SAE AMS6885/2-2021 Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg, Vacuum Curing Part 2 - Qualification Program for Fiber, Carbon Fiber Tape Prepreg, and Film Adhesive
- SAE MA3445-1988 PACKING, PREFORMED O-RING SEAL, FLUOROCARBON (MIL-R-83485, TYPE I), METRIC FSC 5330
- SAE MA3445-2012 PACKING, PREFORMED O-RING SEAL, FLUOROCARBON (MIL-R-83485, TYPE I), METRIC
- SAE AMS3970A-2011 Carbon Fiber Fabric Repair Prepreg, 120°C (250°F) Vacuum Curing Part 0 - Introduction
- SAE AMS6885-2021 Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg, Vacuum Curing Part 0 - Introduction
- SAE AMS3970A-2016 Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 0 - Introduction
- SAE AMS3970-1999 Carbon Fiber Fabric Repair Prepreg, 125 Degrees Celsius (250 Degrees F) Vacuum Curing Part 0.- Introduction
- SAE AMS3970/1A-2011 Carbon Fiber Fabric Repair Prepreg, 120°C (250°F) Vacuum Curing Part 1 - General Requirements
- SAE AMS6885/1-2021 Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg, Vacuum Curing Part 1 - General Requirements
- SAE AMS3970/1A-2016 Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 1 - General Requirements
- SAE AMS3970/3-1999 Carbon Fiber Fabric Repair Prepreg, 125 Degrees Celsius (250 Degrees F) Vacuum Curing Part 3 - Purchasing Specification for Epoxy Prepreg
- SAE AMS3970/1-1999 Carbon Fiber Fabric Repair Prepreg, 125 Degrees Celsius (250 Degrees F) Vacuum Curing Part 1.- General Requirements
- SAE AMS3970/4-1999 Carbon Fiber Fabric Repair Prepreg, 125 Degrees Celsius (250 Degrees F) Vacuum Curing Part 4 - Purchasing Specification for Film Adhesive adhesive
- SAE AMS3970/4A-2011 Carbon Fiber Fabric Repair Prepreg, 120°C (250°F) Vacuum Curing Part 4 - Purchasing Specification for Film Adhesive
- SAE AMS3970/5-2011 Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing - Part 5: Purchasing Specification for Companion Non-Structural Glass Fiber Fabric Prepreg
- SAE AMS3970/5-2016 Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 5 - Purchasing Specification for Companion Non-Structural Glass Fiber Fabric Prepreg
- SAE AMS6885/5-2021 Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg, Vacuum Curing Part 5 - Material Specification for Unidirectional Carbon Fiber Tape Epoxy Prepreg for Repair and Film Adhesive for Repair, 120 to 145 °C (250 to 290 °F) Curing
- SAE AMS6891-2020 Carbon Fiber and Fiberglass Epoxy Prepreg Products with 350 °F (177 °C) Cure for Aerospace Applications
- SAE AMS6885/4-2021 Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg, Vacuum Curing Part 4 - Purchasing Specification for Film Adhesive
- SAE AMS3970/4A-2016 Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 4 - Purchasing Specification for Film Adhesive
- SAE AMS3970/6-2011 Carbon Faber Fabric Repair Prepreg, 120 °C (205 \MDF)Vacuum Curing - Part 6: Material Specification: Carbon Fiber Fabric Reinforced Epoxy Prepreg for Repair, Plain Weave Fabric, 190 g/m<(hoch)2>, Adhesive Film for Repair and Non-Structural Glass Fiber Fab
SAE - SAE International, pre-carbonized
- SAE AMS3960A-2015 Advanced Composites Prepreg - Nominal 250 °F Cure - Carbon Fiber and Epoxy Resin, Unidirectional Tape
- SAE AMS-P-5315-1998 Packing@ Preformed@ Hydrocarbon Fuel Resistant
- SAE MA3445A-2019 PACKING, PREFORMED O-RING SEAL, FLUOROCARBON (MIL-R-83485, TYPE I), METRIC FSC 5330
ES-AENOR, pre-carbonized
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, pre-carbonized
- GB/T 3257.22-1999 Methods for chemical analysis of bauxite--Preparation of pre-dried test samples
Professional Standard - Non-ferrous Metal, pre-carbonized
- YS/T 575.20-2006 Preparation of pre-dried samples for chemical analysis of bauxite ores
- YS/T 575.20-2007 Methods for chemical analysis of bauxite.Part 20:Preparation for pre-dried sample
- YS/T 965-2014 Determinator for the reactivity to carbon dioxide of prebaked anodes used in the production of aluminium
- YS/T 411-1998 The measuring method of CO2 reaction of anode carbon,anode paste for aluminium electrolysis
- YS/T 63.24-2012 Carbonaceous materials used in the production of aluminium.Part 24:Baked anodes.Determination of the reactivity to carbon dioxide.Thermogravimetric method
U.S. Air Force, pre-carbonized
API - American Petroleum Institute, pre-carbonized
- API 26-60106-1973 PREDICTING THE CARBOXYHEMOGLOBIN LEVELS RESULTING FROM CARBON MONOXIDE EXPOSURES
- API 4189-1973 Predicting The Carboxyhemoglobin Levels Resulting From Carbon Monoxide Exposures
- API PUBL 4524-1991 Clinical Toxicology of the Acute Ingestion of Methanol/Hydrocarbon Blends; A-State-of-the Art Review
Group Standards of the People's Republic of China, pre-carbonized
- T/CIECCPA 027-2023 Pre-treatment equipment for carbon dioxide capture from flue gas by chemical absorption method
BE-NBN, pre-carbonized
Professional Standard - Aviation, pre-carbonized
- HB 6701-1993 LWR-1/T300 medium temperature curing epoxy carbon fiber prepreg
工业和信息化部, pre-carbonized
- YS/T 575.20-2021 Methods of chemical analysis of bauxite ores Part 20: Preparation of pre-dried samples
International Organization for Standardization (ISO), pre-carbonized
- ISO 7827:2010 Water quality - Evaluation of the "ready", "ultimate" aerobic biodegradability of organic compounds in an aqueous medium - Method by analysis of dissolved organic carbon (DOC)
Association Francaise de Normalisation, pre-carbonized
- NF T90-312*NF EN ISO 7827:2013 Water quality - Evaluation of the "ready", "ultimate" aerobic biodegradability of organic compounds in an aqueous medium - Method by analysis of dissolved organic carbon (DOC)
- NF A91-482*NF EN ISO 2143:2017 Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment
- NF M07-165*NF EN 16934:2017 Automotive fuels and fat and oil derivates - Determination of steryl glycosides in fatty acid methyl ester (FAME) - Method by GC-MS with prior purification by SPE
- NF M60-317:2001 Énergie nucléaire - Technologie du cycle du combustible - Déchets - Détermination du nickel 63 dans les effluents et déchets par scintillation liquide, après séparation chimique préalable
Korean Agency for Technology and Standards (KATS), pre-carbonized
- KS I ISO 7827:2008 Water quality－Evaluation in an aqueous medium of the “ultimate”aerobic biodegradability of organic compounds－Method by analysis of dissolved organic carbon(DOC)
- KS M ISO 10195:2020 Leather — Chemical determination of chromium(VI) content in leather — Thermal pre-ageing of leather and determination of hexavalent chromium
British Standards Institution (BSI), pre-carbonized
- BS EN ISO 7827:2012 Water quality. Evaluation of the "ready", "ultimate" aerobic biodegradability of organic compounds in an aqueous medium. Method by analysis of dissolved organic carbon (DOC)
- BS ISO 22601:2019 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for determination of phenol oxidative decomposition performance of semiconducting photocatalytic materials by quantitative analysis of total organic carbon (TOC)
- BS EN 12373-7:1999 Aluminium and aluminium alloys - Anodizing - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment
- BS EN 12373-4:1998 Aluminium and aluminium alloys - Anodizing - Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment
- BS EN 12373-4:1998(2010) Aluminium and aluminium alloys - Anodizing - Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment
- BS EN 12373-4:1999 Aluminium and aluminium alloys - Anodizing - Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment
- BS EN 12373-6:1999 Aluminium and aluminium alloys - Anodizing - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution without prior acid treatment
- BS EN ISO 2143:2017 Tracked Changes. Anodizing of aluminium and its alloys. Estimation of loss of absorptive power of anodic oxidation coatings after sealing. Dye-spot test with prior acid treatment
- BS EN 16934:2017 Automotive fuels and fat and oil derivates, Determination of steryl glycosides in fatty acid methyl esters (FAME). Method by GC-MS with prior purification by SPE
- BS EN 12373-7:2002 Aluminium and aluminium alloys - Anodizing - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment
KR-KS, pre-carbonized
- KS M ISO 10195-2020 Leather — Chemical determination of chromium(VI) content in leather — Thermal pre-ageing of leather and determination of hexavalent chromium
Defense Logistics Agency, pre-carbonized
- DLA SMD-5962-95621 REV C-2003 MICROCIRCUIT, DIGITAL, RADIATION HARDENED CMOS, PRESETTABLE UP/DOWN COUNTER, MONOLITHIC SILICON
- DLA SMD-5962-96626 REV B-1997 MICROCIRCUIT, DIGITAL, RADIATION HARDENED, CMOS, PRESETTABLE DIVIDE-BY-"N" COUNTER, MONOLITHIC SILICON
- DLA SMD-5962-96608 REV C-2003 MICROCIRCUIT, DIGITAL, RADIATION HARDENED CMOS, PRESETTABLE UP/DOWN COUNTER, MONOLITHIC SILICON
- DLA SMD-5962-96657 REV A-1997 MICROCIRCUIT, DIGITAL, RADIATION HARDENED CMOS, PRESETTABLE UP/DOWN COUNTERS, MONOLITHIC SILICON
- DLA SMD-5962-96600 REV A-1998 MICROCIRCUIT, DIGITAL, RADIATION HARDENED CMOS, 8-STAGE PRESETTABLE SYNCHRONOUS DOWN COUNTERS MONOLITHIC SILICON
- DLA SMD-5962-95807 REV B-2004 MICROCIRCUIT, DIGITAL, RADIATION HARDENED, HIGH SPEED CMOS, SYNCHRONOUS PRESETTABLE 4-BIT BINARY COUNTER, MONOLITHIC SILICON
中国气象局, pre-carbonized
- QX/T 482-2019 Non-occupational carbon monoxide poisoning meteorological conditions warning level
Hebei Provincial Standard of the People's Republic of China, pre-carbonized
- DB13/T 1494-2017 Non-occupational Carbon Monoxide Poisoning Meteorological Condition Scale and Forecast
- DB13/T 1494-2012 Non-occupational Carbon Monoxide Poisoning Meteorological Condition Scale and Forecast
AGMA - American Gear Manufacturers Association, pre-carbonized
- 05FTM19-2005 The Application of Very Large@ Weld Fabricated@ Carburized Hardened & Hard Finished Advanced Technology Gears in Steel
Natural Gas Processor's Association (NGPA), pre-carbonized
- GPA RR-136-1994 Predictive Model for the Thermophysical Properties of Carbon Dioxide Rich Mixtures
Professional Standard - Electron, pre-carbonized
- SJ 2803-1987 Method for determination of trace carbon dioxide in electronic grade gases--Pre-cut hydrogen flame ionzation detector method
- SJ 2801-1987 Method for determination of trace carbon monoxide in electronic grade gases--Precut hydrogen flame ionization detector method
Underwriters Laboratories (UL), pre-carbonized
- UL 1254 BULLETINS-2004 UL Standard for Safety Pre-Engineered Dry Chemical Extinguishing System Units (11/18/2004 (4p); 08/18/2004 (64p))
German Institute for Standardization, pre-carbonized
- DIN EN ISO 7827:2013 Water quality - Evaluation of the "ready", "ultimate" aerobic biodegradability of organic compounds in an aqueous medium - Method by analysis of dissolved organic carbon (DOC) (ISO 7827:2010); German version EN ISO 7827:2012
- DIN EN ISO 2143:2018 Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment (ISO 2143:2017)
- DIN EN 16934:2017 Automotive fuels and fat and oil derivates - Determination of steryl glycosides in fatty acid methyl esters (FAME) - Method by GC-MS with prior purification by SPE
- DIN EN 16934:2017-10 Automotive fuels and fat and oil derivates - Determination of steryl glycosides in fatty acid methyl esters (FAME) - Method by GC-MS with prior purification by SPE; German version EN 16934:2017
Danish Standards Foundation, pre-carbonized
- DS/EN ISO 2143:2010 Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment
- DS/ISO 2143:1988 Anodizing of aluminium and its alloys. Estimation of loss of absorptive power of anodic oxide coatings after sealing. Dye spot test with prior acid treatment
IN-BIS, pre-carbonized
Lithuanian Standards Office , pre-carbonized
- LST EN ISO 2143:2010 Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment (ISO 2143:2010)
AENOR, pre-carbonized
- UNE-EN ISO 2143:2011 Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment (ISO 2143:2010)
CEN - European Committee for Standardization, pre-carbonized
- EN 16934:2017 Automotive fuels and fat and oil derivates - Determination of steryl glycosides in fatty acid methyl esters (FAME) - Method by GC-MS with prior purification by SPE
National Fire Protection Association (NFPA), pre-carbonized
- NFPA 720-2012 Standard for the Installation of Carbon Monoxide (CO) Detection and Warning Equipment Effective Date: 08/31/2011
ZA-SANS, pre-carbonized
- SANS 2143:1981 Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxide coatings after sealing - Dye spot test with prior acid treatment
IT-UNI, pre-carbonized
- UNI 6642-1970 Chemical analysis of manganese ores. Determination of aluminium oxide. Gravimetric method with oxyquinoline, by preliminary separation of aluminium as phosphate.
RO-ASRO, pre-carbonized
- STAS 10806/4-1986 Wood working tools BORING GUTTERS WITH CARBIDE TIPS AND PRECUTTING TEETH FOR SLOTS Dimentions
ES-UNE, pre-carbonized
- UNE-EN 16934:2018 Automotive fuels and fat and oil derivates - Determination of steryl glycosides in fatty acid methyl esters (FAME) - Method by GC-MS with prior purification by SPE
European Committee for Standardization (CEN), pre-carbonized
- EN ISO 7625:2010 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., pre-carbonized
- ASHRAE 4542-2002 Convective Heat Transfer from In-Tube Cooling of Turbulent Supercritical Carbon Dioxide: Part 2 - Experimental Data and Numerical Predictions (RP-913)
未注明发布机构, pre-carbonized
- SAE AMS3970/6-2016 Carbon Faber Fabric Repair Prepreg, 120 °C (205 \MDF)Vacuum Curing - Part 6: Material Specification: Carbon Fiber Fabric Reinforced Epoxy Prepreg for Repair, Plain Weave Fabric, 190 g/m<(hoch)2>, Adhesive Film for Repair and Non-Structural Glass Fiber Fab