ZH
RU
ES

Annealing temperature method

Annealing temperature method, Total:500 items.

In the international standard classification, Annealing temperature method involves: Glass, Coals, Refractories, Protection against fire, Burners. Boilers, Explosion protection, Fuels, Plastics, Products of non-ferrous metals, Electrical wires and cables, Protection against dangerous goods, Electrical equipment for working in special conditions, Packaging and distribution of goods in general, Construction materials, Thermodynamics and temperature measurements, Products of the chemical industry, Heat treatment, Lighting, Miscellaneous domestic and commercial equipment, Aerospace fluid systems and components, Rubber, Environmental protection, Corrosion of metals, Installations in buildings, Pulps, Paper and board, Packaging materials and accessories, Optics and optical measurements, Electrical engineering in general, Testing of metals, Farm buildings, structures and installations, Printed circuits and boards, Occupational safety. Industrial hygiene, Leather technology, Environmental testing, Components and accessories for telecommunications equipment, Photography, Meat, meat products and other animal produce, Vocabularies, Metrology and measurement in general, Linear and angular measurements, Measurement of volume, mass, density, viscosity, Elements of buildings, Analytical chemistry, Road vehicle systems, Road engineering, Geology. Meteorology. Hydrology, Galvanic cells and batteries, Non-ferrous metals, Magnetic materials, Farming and forestry, Ceramics, Home textiles. Linen, Tyres, Water quality, Welding, brazing and soldering, Materials for aerospace construction, Protection of and in buildings, Power stations in general, Materials for the reinforcement of composites, Non-metalliferous minerals, Insulating fluids, Ferrous metals, Textile fibres, Refrigerating technology, Resistors, Lamps and related equipment, Soil quality. Pedology, Iron and steel products, Products of the textile industry, Processes of the textile industry, Shipbuilding and marine structures in general, Tobacco, tobacco products and related equipment.

Association Francaise de Normalisation, Annealing temperature method

NF B30-105:1972 Determination of annealing point and strain point of glass.
NF B40-315*NF EN ISO 1893:2009 Refractory products - Determination of refractoriness under load - Differential method with rising temperature
NF C20-924-2-13*NF EN IEC 60695-2-13:2021 Fire hazard testing - Part 2-13 : glowing/hot-wire based test methods - Glow wire ignition temperature (GWIT) test method for materials
NF EN ISO 1893:2009 Produits réfractaires - Détermination de l'affaissement sous charge - Méthode différentielle avec élévation de la température
NF EN ISO 8894-1:2010 Matériaux réfractaires - Détermination de la conductivité thermique - Partie 1 : Méthodes du fil chaud ("croisillon" et "thermomètre à résistance")

ES-AENOR, Annealing temperature method

UNE 36-034-1985

IN-BIS, Annealing temperature method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Annealing temperature method

GB/T 18511-2017 Determination of ignition temperature of coal
GB/T 34218-2017 Refractory products—Determination of compressive strength at elevated temperature
GB/T 34219-2017 Refractory matericals—Determination of tensile strength at room temperature
GB/T 34220-2017 Refractory Products—Determination of tensile strength at elevated temperature
GB/T 34217-2017 Refractory products—Determination of torsion strength at elevated temperature
GB/T 3001-2017 Refractory products—Determination of modulus of rupture at ambient temperature
GB/T 3002-2017 Refractory products—Determination of modulus of rupture at elevated temperatures
GB/T 7322-2017 Refractory products—Determination of refractoriness

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Annealing temperature method

GB/T 18511-2001 Determination of ignition temperature of coal
GB/T 5989-1998 Refractory products--Determination of Refractoriness-under-load--Differential-with rising temperature
GB/T 5989-2023 Refractory products—Determination of refractoriness under load(differential method with rising temperature)
GB/T 5989-2008 Refractory products.Determination of refractoriness-under-load.Differential method with rising temperature
GB/T 16429-1996 Determination of the minimum ignition temperature of dust cloud
GB/T 16430-1996 Determination of the minimum ignition temperature of dust layer
GB/T 3002-1982 Test method for modulus of rupture of refractory products at elevated temperature
GB/T 5072-2008 Refractories.Determination of cold compressive strength
GB/T 3002-2004 Refractory products-Determination of modulus of rupture at elevated temperatures
GB/T 3001-2007 Refractory products.Determination of modulus of rupture at ambient temperature
GB/T 28196-2011 Determination of annealing point and strain point for glass
GB/T 3001-2000 Shaped refractory products-Determination of modulus of rupture at ambient temperature
GB/T 13243-1991 Test method for modulus of rupture of refactories containing carbon at elevated temperatures
GB/T 36133-2018 Refractory materials.Determination of thermal conductivity (Platinum resistance thermometer method)
GB/T 3997.2-1998 Shaped insulating refractory products--Determination of cold crushing strength
GB/T 22459.4-2008 Refractory mortars.Part 4:Determination of flexural bonding strength
GB/T 19469-2004 Determination of ignition temperature of pyrotechnic composition-DTA-TG analysis
GB/T 7322-1997 Test method for pyrometric cone equivalent (refractoriness) of refractories
GB/T 7322-2007 Refractory products.Determination of pyrometric cone equivalent (refractoriness)
GB/T 18301-2001 Test method for abrasion resistance of refractory materials at room temperature
GB/T 18301-2012 Refractory products.Determination of resistance to abrasion at ambient temperature
GB/T 42653-2023 Test method for high temperature viscosity of glass
GB/T 5072.2-2004 Dense shaped refractory products-Determination of cold compressive strength Part2:Test with packing
GB/T 5072.1-1998 Dense, shaped refractory products--Determination of cold compressive strength--Part 1: Referee test without packing
GB/T 5071-1997 Refractory materials--Determination of true density
GB/T 5071-2013 Refractory materials.Determination of true density
GB/T 22459.7-2008 Refractory mortars.Part 7:Determination of properties at elevated temperatures
GB/T 22459.1-2008 Refractory mortars.Part 1:Determination of consistency using the penetrating cone method
GB/T 1634-1979 Test method of heat deflection temperature under bending load for plastics
GB/T 9343-2008 Test method for flammability of plastics.Determination of flash-ignition temperature and self-ignition temperature
GB/T 5470-1985 Test method for brittleness temperature of plastics by impact
GB/T 8073-1987 Method of wet determination for loftiness of chrysotile asbestos
GB/T 23605-2009 Method for β transus temperature determination of titamium alloys
GB/T 16534-2009 Fine ceramics(advanced ceramics,advanced technical ceramics).Test method for hardness of monolithic ceramics at room temperature
GB/T 17043-1997 Test method of environmental temperature for aircraft tyre
GB/T 23605-2020 Determination of β transus temperature of titanium alloys
GB/T 30711-2014 Test method for thermogravimetry (TG) of friction materials
GB/T 4106-1983 Determination method for secondary recrystallization temperature of tungsten wire
GB/T 6646.2-1986 Method for wet classification of chrysotile asbestos fibre by length distribution

Professional Standard - Ferrous Metallurgy, Annealing temperature method

YB/T 4024-1991 Test method for refractoriness under load of refractory mortars
YB 4024-1991 Test method for softening temperature of refractory mud under load (heating method)
YB 4022-1991 Test method for load softening temperature of refractory mud (differential-temperature rise method)
YB/T 370-1995 Test method for refractoriness under load of refractory products (non-differential,with rising temperature)
YB/T 370-2016 Refractoies.Determination of refractoriness under load (non-differential, with rising temperature)
YB/T 2208-1998 Test method for crushing strength of castable refractory at elevated temperature
YB/T 2203-1998 Test method for refractoriness under load of castable refractory.Non-differential,with rising temperature
YB/T 5201-1993 Test method for room temperature flexural strength and compressive strength of dense refractory castables
YB/T 5199-1993 Test method for refractoriness of dense refractory castables
YB/T 5121-1993 Test method for cone penetration of refractory mortar
YB/T 173-2000 Testing method for cold specific resistivity of carbon-containing refractory products
YB/T 186-2014 Method of the test for melting temperature of continuous casting mold powder
YB/T 186-2001 Method of the test for melting temperature of continuous casting mold powder

American Society for Testing and Materials (ASTM), Annealing temperature method

ASTM E814-11 Standard Test Method for Fire Tests of Penetration Firestop Systems
ASTM D1929-19 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D1929-20 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D1929-14 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM B609/B609M-12e1 Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
ASTM B800-00 Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes-Annealed and Intermediate Tempers
ASTM B609/B609M-99(2010) Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
ASTM B800-05(2021) Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes—Annealed and Intermediate Tempers
ASTM B609/B609M-12(2016) Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
ASTM E2021-15(2023) Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers
ASTM D1929-16 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM C1350M-96(2008) Standard Test Method for Measurement of Viscosity of Glass Between Softening Point and Annealing Range (Approximately 10⁸ Pa183;s to Approximately 10 ¹³ Pa183;s) by Beam Bending (Metric)
ASTM D3466-76(1998) Standard Test Method for Ignition Temperature of Granular Activated Carbon
ASTM D3466-06(2018) Standard Test Method for Ignition Temperature of Granular Activated Carbon
ASTM C1350M-96(2013) Standard Test Method for Measurement of Viscosity of Glass Between Softening Point and Annealing Range lpar;Approximately 10⁸ Pamiddot;s to Approximately 10¹³ Pamiddot;srpar; by Beam Bending lpar;Metricrpar;
ASTM C5-79(1997) Standard Specification for Quicklime for Structural Purposes
ASTM C5-03(2009) Standard Specification for Quicklime for Structural Purposes
ASTM C598-93(1998) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM C598-93(2019) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM D8211-21 Standard Test Method for Hot Surface Ignition Temperature of Gases on Flat Surface
ASTM D8211-18 Standard Test Method for Hot Surface Ignition Temperature of Gases on Flat Surface
ASTM E452-97 Standard Test Method for Calibration of Refractory Metal Thermocouples Using a Radiation Thermometer
ASTM E452-02 Standard Test Method for Calibration of Refractory Metal Thermocouples Using a Radiation Thermometer
ASTM E452-02(2007) Standard Test Method for Calibration of Refractory Metal Thermocouples Using a Radiation Thermometer
ASTM D2155-18 Standard Test Method for Determination of Fire Resistance of Aircraft Hydraulic Fluids by Autoignition Temperature
ASTM D1329-88(1998) Standard Test Method for Evaluating Rubber Property-Retraction at Lower Temperatures (TR Test)
ASTM D1329-16 Standard Test Method for Evaluating Rubber Property&x2014;Retraction at Lower Temperatures (TR Test)
ASTM D2155-12 Standard Test Method for Determination of Fire Resistance of Aircraft Hydraulic Fluids by Autoignition Temperature
ASTM D3813/D3813M-98(2012)e1 Standard Test Method for Curling, Twisting, and Tubing on Unwind of Pressure-Sensitive Tapes
ASTM C1350M-96(2003) Standard Test Method for Measurement of Viscosity of Glass Between Softening Point and Annealing Range (Approximately 10⁸ Pa183;s to Approximately 10 ¹³ Pa183;s) by Beam Bending (Metric)
ASTM E2509-14 Standard Test Method for Temperature Calibration of Rheometers in Isothermal Mode
ASTM C336-71(2000) Standard Test Method for Annealing Point and Strain Point of Glass by Fiber Elongation
ASTM C336-71(1995)e1 Standard Test Method for Annealing Point and Strain Point of Glass by Fiber Elongation
ASTM C336-71(2020) Standard Test Method for Annealing Point and Strain Point of Glass by Fiber Elongation
ASTM C1279-05 Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass
ASTM C1279-09 Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass
ASTM C1279-13 Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass
ASTM C704/C704M-14 Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
ASTM C704/C704M-15 Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
ASTM D7428-08 Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
ASTM D6076-18 Standard Test Method for Shrinkage Temperature of Leather
ASTM C1113-99 Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)
ASTM C513-89(1995) Standard Test Method for Obtaining and Testing Specimens of Hardened Lightweight Insulating Concrete for Compressive Strength
ASTM C1113/C1113M-09(2019) Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)
ASTM C513/C513M-11e1 Standard Test Method for Obtaining and Testing Specimens of Hardened Lightweight Insulating Concrete for Compressive Strength
ASTM C1113-99(2004) Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)
ASTM C1113/C1113M-09 Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)
ASTM E2602-09(2015) Standard Test Methods for the Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry
ASTM C704/C704M-15(2022) Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
ASTM C16-81(1996)e1 Standard Test Method for Load Testing Refractory Brick at High Temperatures
ASTM C704-07 Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
ASTM C704-99 Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
ASTM C704-01e1 Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
ASTM C704-01 Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
ASTM C704/C704M-09 Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
ASTM C16-81(2001) Standard Test Method for Load Testing Refractory Brick at High Temperatures
ASTM C704/C704M-15(2022)e1 Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
ASTM C704/C704M-15e1 Standard test method for abrasion resistance of refractory materials at room temperature
ASTM E3057-19 Standard Test Method for Measuring Heat Flux Using Directional Flame Thermometers with Advanced Data Analysis Techniques
ASTM C1113/C1113M-09(2013) Standard Test Method for Thermal Conductivity of Refractories by Hot Wire lpar;Platinum Resistance Thermometer Techniquerpar;
ASTM D1525-87 Standard Test Method for Vicat Softening Temperature of Plastics
ASTM D6076-97 Standard Test Method for Shrinkage Temperature of Leather
ASTM D6076-03 Standard Test Method for Shrinkage Temperature of Leather
ASTM D286-30 Method of Test for Autogenous Ignition Temperatures of Petroleum Products
ASTM D6076-18(2023) Standard Test Method for Shrinkage Temperature of Leather
ASTM D1525-17e1 Standard Test Method for Vicat Softening Temperature of Plastics
ASTM D6076-08(2013) Standard Test Method for Shrinkage Temperature of Leather
ASTM D6076-08 Standard Test Method for Shrinkage Temperature of Leather
ASTM E2602-22 Standard Test Methods for Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry
ASTM E2602-09 Standard Test Method for the Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry
ASTM E2509-08 Standard Test Method for Temperature Calibration of Rheometers in Isothermal Mode
ASTM E2509-21 Standard Test Method for Temperature Calibration of Rheometers in Isothermal Mode
ASTM C24-09(2018) Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High-Alumina Refractory Materials

German Institute for Standardization, Annealing temperature method

DIN 17022-1:1994-10 Heat treatment of ferrous materials - Methods of heat treatment - Part 1: Hardening, austempering, annealing, quenching, tempering of components
DIN EN ISO 1893:2008-09 Refractory products - Determination of refractoriness under load - Differential method with rising temperature (ISO 1893:2007); German version EN ISO 1893:2008
DIN EN ISO 1893:2008 Refractory products - Determination of refractoriness under load - Differential method with rising temperature (ISO 1893:2007); German version EN ISO 1893:2008
DIN EN 993-12:1997-06 Methods of test for dense shaped refractory products - Part 12: Determination of pyrometric cone equivalent (refractoriness); German version EN 993-12:1997
DIN 17022-1:1994 Heat treatment of ferrous materials - Methods of heat treatment - Part 1: Hardening, austempering, annealing, quenching, tempering of components
DIN ISO 7884-7:1998 Glass - Viscosity and viscometric fixed points - Part 7: Determination of annealing point and strain point by beam bending (ISO 7884-7:1987)
DIN EN ISO 16282:2008-08 Methods of test for dense shaped refractory products - Determination of resistance to abrasion at ambient temperature (ISO 16282:2007); German version EN ISO 16282:2008
DIN ISO 718:1993 Laboratory glassware; thermal shock and thermal shock endurance; test methods; identical with ISO 718:1990
DIN EN 993-6:2019-03 Methods of test for (dense) shaped refractory products - Part 6: Determination of modulus of rupture at ambient temperature; German version EN 993-6:2018

Professional Standard - Electricity, Annealing temperature method

DL/T 2148-2020 Method for Determination of Biomass Ignition Temperature
DL/T 1446-2015 Measurement of ignition temperature of pulverized coal-air flow
DL/T 660-2007 Test procedure for the viscosity of coal ash in high-temperature
DL/T 660-1998 Test procedure for coal ash high-temperature viscosity characteristic
DL/T 1162-2012 Method for steam oxidation test of metallic materials for thermal power plants

Professional Standard - Aerospace, Annealing temperature method

QJ 2968-1997 Method for measuring medium and high temperature temperature of liquid rocket engine
QJ 2902-1997 Solid rocket motor temperature test method
QJ 1216-1987 固体发动机
QJ 1218-1987 固体发动机
QJ 1217-1987 固体发动机
QJ 3036-1998 Measurement method of temperature and noise in static test space of solid rocket motor
QJ 1409-1988 Calculation method and computer program for temperature field of solid rocket motor nozzle
QJ 2302-1992 Method for measuring internal temperature of ablative materials
QJ 1468-1988 Test method for initial thermal decomposition temperature and deflagration temperature of composite solid propellant
QJ 1238.2-1987 Low temperature test of cable test method on missile launch vehicle
QJ 1238.3-1987 High temperature test of cable test method on missile launch vehicle
QJ 3061-1998 Hydrogen-oxygen rocket engine low temperature and high speed bearing test method
QJ 1138-1987 Ablation of silicon-based materials—calculation method of temperature field

国家市场监督管理总局、中国国家标准化管理委员会, Annealing temperature method

GB/T 16430-2018 Determination of the minimum ignition temperature of dust layer
GB/T 38298-2019 Test method of auto-ignition temperature for solid chemicals
GB/T 22459.4-2022 Refractory mortars—Part 4: Determination of flexural bonding strength
GB/T 22459.1-2022 Refractory mortars—Part 1：Determination of consistency using the penetrating cone method
GB/T 37631-2019 Man-made fiber—Test method for thermal decomposition temperature

Military Standard of the People's Republic of China-General Armament Department, Annealing temperature method

GJB 5021-2001 Solid rocket motor temperature test method
GJB 5092-2004 Determination and correction method of artillery muzzle velocity reduction
GJB 8684.8-2015 Test methods for performance of pyrotechnics Part 8: Determination of flame temperature by thermal radiation method
GJB 5309.27-2004 Test methods for pyrotechnics Part 27: Temperature shock test
GJB 8670.6-2015 Test methods for special bomb effects Part 6: Determination of flame temperature of arson bombs Thermal radiation method
GJB 8670.5-2015 Test methods for special bullet effects Part 5: Thermocouple method for determination of ignition flame temperature of arson bombs
GJB 736.13-1991 Test methods for pyrotechnics Accelerated life test Constant temperature stress test method
GJB 8706.18-2015 Special aerial bomb effect test method Part 18: Aerial incendiary bomb fire flame combustion temperature thermocouple method
GJB 8683.11-2015 Test methods for physical parameters of pyrotechnics Part 11: Determination of spontaneous ignition temperature Differential thermal analysis and differential scanning calorimetry
GJB 8706.17-2015 Special aerial bomb effect test method Part 17: Aerial incendiary bomb fire flame combustion temperature thermal radiation method
GJB 8709.19-2015 Rocket Launcher Test Methods Part 19: High Temperature Test
GJB 8709.20-2015 Rocket Launcher Test Methods Part 20: Low Temperature Test
GJB 736.2-1989 Test methods for pyrotechnics - Determination of radio frequency sensitivity of electrical pyrotechnics
GJB 736.11-1990 Test methods for pyrotechnics - Electrostatic sensitivity test for pyrotechnics
GJB 771.108-1993 Test methods for gunpowder performance. Thermomechanical measurement method for glass transition temperature test of solid propellant and coating.
GJB 1047.9-1990 Black powder test method Determination of density
GJB 1047.11-1990 Black powder test method Determination of particle size
GJB 5020-2003 Calibration method for comprehensive temperature, humidity and vibration test equipment
GJB 1797-1993 Test method for pressure difference strength of aircraft electrically heated glass under temperature difference
GJB 5309.28-2004 Test methods for pyrotechnics Part 28: High temperature exposure test
GJB 5309.9-2004 Test methods for pyrotechnics Part 9: Electric fire sensitivity test
GJB 8671.11-2015 Test methods for metal cartridges Part 11: Firing strength and ejection tests
GJB 1047.10-1990 Black powder test method - Determination of false density

Professional Standard - Building Materials, Annealing temperature method

JC/T 752-1984 Quartz glass annealing point test method (drawing method)
JC/T 805-1988 Test method for exudating temperature of glass phase of refractory for glass melting furnace
JC/T 805-2013 Test method for exudating temperature of glass phase of refractory for glass furnace
JC/T 337-1983 Test method for secondary bubbling temperature of glass bulbs

RU-GOST R, Annealing temperature method

GOST R 55957-2014 Activated carbon. Standard test method for ignition temperature
GOST 4070-2000 Refractory products. Method for determination of refractoriness-under-load
GOST 25085-1981 Refractories. Method of determination for strength under bending at elevated temperatures
GOST 31292-2006 Glass containers. Methods of testing the residual stresses after annealing
GOST ISO 1893-2014 Refractory products. Determination of refractoriness under load. Differential method with rising temperature
GOST 4071.2-1994 Insulating refractory products. Determination of cold compressive strength
GOST 4071.2-2021 Insulating refractory products. Determination of cold compressive strength at room temperature
GOST R 51267-1999 Matches. Method of testing matches sensibility for ignition
GOST R 51330.5-1999 Explosionprotected electrical apparatus. Part 4. Method of test for ignition temperature
GOST R ISO 1762-2013 Pulps, paper and board. Method of determination of residue (ash) on ignition at 525 °C
GOST 25183.10-1982 Photographic gelatine. Method of moisture determination
GOST 4071.1-1994 Refractory products with a true porosity of less than 45%. Determination of cold compressive strength
GOST 4071.1-2021 Refractory products with less than 45 % true porosity. Method for determination of compressive strength at room temperature
GOST R 50341-1992 Manometric thermometers and temperature transducers. General technical requirements and methods of test
GOST 24933.3-1981 Seed of flowers. Methods for determination of moisture
GOST ISO 279-2014 Essential oils. Method for determination of relative density at a temperature of 20 °C. Reference method
GOST R 56300-2014 Refractories and refractory raw materials. Methods of true density determination
GOST 21342.15-1978 Resistors. Test method for temperature dependence of resistance
GOST 27428-1987 Standart method of measuring the pinch temperature of quarts-tungsten-halogen lamps
GOST 27753.4-1988 Greenhouse grounds. Method for determination of total salts content
GOST IEC 60360-2012 Standard method of measurement of lamp cap temperature rise
GOST 16388-2017 Phenol-formaldehyde resins. Method for determination of drop temperature

Standard Association of Australia （SAA）, Annealing temperature method

AS 1774.12:2001(R2013)
AS 1774.10:2002(R2013)
AS 1774.12:2001 Refractories and refractory materials - Physical test methods - Refractoriness under load - Temperatures of deformation at constant load with rising temperature
AS 1530.7:2007 Methods for fire tests on building materials, components and structures - Smoke control assemblies - Ambient and medium temperature leakage test procedure
AS 1774.26:1995 Refractories and refractory materials - Physical test methods Method 26: Creep in compression - Deformation under constant load and constant temperature
AS 1774.27:2001 Refractories and refractory materials - Physical test methods - Modulus of rupture at elevated temperatures
AS 1774.1:2000 Refractories and refractory materials - Physical test methods - Determination of cold compressive strength
AS/NZS 61241.2.1:2000 Electrical apparatus for use in the presence of combustible dust - Test methods - Methods for determining the minimum ignition temperature of dust
AS 1774.27:2001(R2013)
AS 4215.1:1995 Methods of test for determining fire extinguishing and inerting concentrations for flammable liquids and gases - Determination of fire extinguishing concentrations
AS 4215.0:1995 Methods of test for determining fire extinguishing and inerting concentrations for flammable liquids and gases - General introduction and list of methods

YU-JUS, Annealing temperature method

JUS B.D8.303-1991 Refractories. Methods ofphysical testing. Determination of refractoriness under load with rising temperature
JUS B.D8.321-1991 Refractories. Methods of physical testing. Determination ofmodulus ofrupture at elevated temperatu-res
JUS B.D8.309-1984 Refractories. Methods of physical testing. Determination of cold crushing strength shaped insulating refractory products
JUS B.D8.304-1984 Refractories. Methods of physical testing. Determination of cold crushing strength dense shaped refracto-ry products
JUS B.D8.307-1991 Refractories. Methods of physical testing. Determination ofmodulus ofrupture atambient temperatu-re
JUS B.D8.316-1988 Refractories. Methods of physica' testing. Determination of cold crushing strength for tar-bondid, tar-bondid tempered and tar-impregnated refractories materials

Indonesia Standards, Annealing temperature method

SNI 15-1021-1989 Test method for annealing point and strain point of glass
SNI 19-1141-1989 Temperature, Test method
SNI ISO 16282:2010 Methods of test for dense shaped refractory products - Determination of resistance to abrasion at ambient temperature
SNI 06-7127-2005 Test methods of shrinkage temperatures of tanned leather
SNI 15-2530-1991 Portland cement, Test method for fineness
SNI 09-4056-1996 Method of high and low temperatur test for motor vehicle parts
SNI 06-6400-2000 Methods for determination of asphalt volume correction to volume at standard temperature

ZA-SANS, Annealing temperature method

SANS 5909:1979 Refractoriness under load (with rising temperature) of refractory bricks
SANS 5916:1980 Thermal expansion of refractory materials (dial gauge method for temparatures up to 1 150 鳦)

Korean Agency for Technology and Standards (KATS), Annealing temperature method

KS L 2401-2009 Testing method for annealing point and strain point of glass by beam bending
KS L 2401-1999 Testing method for annealing point and strain point of glass by beam bending
KS C IEC 60079-4-2007(2017) Explosive atmospheres－Part 4：Method of test for ignition temperature
KS C IEC 60079-4-2007(2022) Explosive atmospheres－Part 4：Method of test for ignition temperature
KS L 2401-1995 Testing method for annealing point and strain point of glass by beam bending
KS C 1606-1991(2016) Electrica1 Methods of Temperature Measurements
KS C IEC 60695-2-13:2017 Fire hazard testing — Part 2-13: Glowing/hot-wire based test methods — Glow-wire ignition temperature(GWIT) test method for materials
KS A 0512-1994 Method of temperature measurement by liquid-in-glass thermometers
KS A 0514-2005(2020) Method of temperature measurement by filled-system thermometers and bimetaillic thermometers
KS A 0514-1994 Method of temperature measurement by filled-system thermometers and bimetallic thermometers
KS A 0511-2005 Temperature measurement－General requirement
KS C 0076-1990(2017) Methods for determining distribution temperature and colour temperature or correlated co1our temperature of light sources
KS L ISO 10059-2:2013 Dense, shaped refractory products — Determination of cold compressive strength — Part 2: Test with packing
KS A 0513-2016(2021) Methods of temperature measurement by optical pyrometers
KS L ISO 7884-7:2014 Glass — Viscosity and viscometric fixed points — Part 7: Determination of annealing point and strain point by beam bending
KS C 1606-2021 Electrical methods of temperature measurements
KS L 3113-2006 Testing method for refractoriness of refractory materials and products
KS L ISO 16282-2012(2017) Methods of test for dense shaped refractory products－Determination of resistance to abrasion at ambient temperature
KS L 2401-2009(2019) Testing method for annealing point and strain point of glass by beam bending
KS L 3113-2016 Testing method for refractoriness of refractory materials and products
KS L 3113-2016(2021) Testing method for refractoriness of refractory materials and products
KS L 3113-1985 Testing method for refractoriness of refractory materials and products
KS C IEC 60695-2-13-2017(2022) Fire hazard testing — Part 2-13: Glowing/hot-wire based test methods — Glow-wire ignition temperature(GWIT) test method for materials
KS B 0800-2001 Test methods for Vickers hardness at elevated temperatures
KS L ISO 16282-2012(2022) Methods of test for dense shaped refractory products－Determination of resistance to abrasion at ambient temperature
KS L 3126-2010 Testing method for grain size of refractory mortar
KS L 3126-2015 Testing method for grain size of refractory mortar
KS L 3126-2015(2020) Testing method for grain size of refractory mortar
KS L 3126-1974 Testing method for grain size of refractory mortar
KS C IEC 61241-2-1-2003(2018)
KS C 0076-1990(2022) Methods for determining distribution temperature and colour temperature or correlated co1our temperature of light sources
KS M 3050-1990(2001) TESTING METHODS FOR TRANSITION TEMPERATURES OF PLASTICS
KS D 0027-2002(2022) Methods of measuring case depth for steel hardened by flame or induction hardening process
KS L 3110-2007 Testing method of bending strength for fire brick
KS L 3127-1995 Testing method for cone penetration of refractory mortar
KS L 3110-2017(2022) Testing method of bending strength for fire brick
KS L 3110-2017 Testing method of bending strength for fire brick
KS L 3110-1980 Testing method of bending strength for fire brick
KS L 3139-2006(2021) Testing method for modulus of rupture of refractory bricks and insulating fire bricks at elevated temperature
KS L 3139-2006 Testing method for modulus of rupture of refractory bricks and insulating fire bricks at elevated temperature
KS B 0800-1995 Test methods for Vickers hardness at elevated temperatures
KS B 0800-2001(2021) Test methods for Vickers hardness at elevated temperatures
KS L 3115-1-2010 Testing method for cold compressive strength of refractory bricks-Part 1:Test without packing
KS L 3115-2-2012 Testing method for cold compressive strength of refractory bricks-Part 2:Test with packing
KS L 3115-1-2015 Testing method for cold compressive strength of refractory bricks — Part 1: Test without packing
KS F 2901-2008 Test methods for thickness and density of sprayed fire resistive material applied to structural members
KS L 3139-2006(2016) Testing method for modulus of rupture of refractory bricks and insulating fire bricks at elevated temperature
KS C 2139-2002 Standards of testing method for Curie temperature of magnetic materials
KS C 2140-2003 Standards of testing method forphase transition temperature of ferroelectrics
KS B 5519-2014 General rules for expression of the performance of radiation thermometers
KS D 0069-2002 Method of determining the crystallization temperatures of amorphous metals
KS B 5519-2009 General rules for expression of the performance of radiation thermometers
KS C 2712-2001(2021) Test methods of negative temperature coefficient thermistor
KS B 0800-2001(2016) Test methods for Vickers hardness at elevated temperatures
KS K 0720-2007 Test method for colour fastness to high temperature steaming
KS K 0720-1979 Test method for colour fastness to high temperature steaming
KS K 0720-1987 Test method for colour fastness to high temperature steaming
KS M 6676-1995 Testing method for brittleness temperature of plastics and vulcanized elastomers by low temperature impact
KS L 3314-2012 Testing method for mocompressive strength of insulating fire bricks
KS L 3504-2008 Testing method for grain size of castable refractories
KS L 3314-2017 Testing method for mocompressive strength of insulating fire bricks
KS L 3504-2008(2018) Testing method for grain size of castable refractories
KS L 3504-1973 Testing method for grain size of castable refractories
KS L 3314-1983 Testing method for mocompressive strength of insulating fire bricks

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Annealing temperature method

GJB 5384.8-2005 Test methods of performance for pyrotechnic composition Part 8: Determination of flame temperature Thermal radiation method
GJB 5384.7-2005 Test methods of performance for pyrotechnic composition Part 7: Determination of burning temperature Thermocouple method
GJB 5382.11-2005 Test methods of physical parameter for pyrotechnic. Part 11: Determination of Autoignition temperature. DTA and DSC method
GJB 6238.17-2008 Test method of effect for special aerial bomb. Part 17: Flame burning time for incendiary unit of aerial incendiary bomb. Thermoradiation method
GJB 6238.18-2008 Test method of effect for special aerial bomb. Part 18: Flame burning time for incendiary unit of aerial incendiary bomb. Thermocouple method
GJB 5383.6-2005 Test methods of sensitivity and stability for pyrotechnic. Part 6: Test for flame sensitivity. Fuse method
GJB 6458.19-2008 Test method of rocket launcher. Part 19: High temperature test
GJB 6458.20-2008 Test method of rocket launcher. Part 20: Low temperature test
GJB 5383.5-2005 Test methods of sensitivity and stability for pyrotechnic. Part 5: Test for flame sensitivity. Guide tube method
GJB 5383.8-2005 Test methods of sensitivity and stability for pyrotechnic. Part 8: Test for electrical spark. Up and down method

British Standards Institution (BSI), Annealing temperature method

BS 7034-7:1988 Viscosity and viscometric fixed points of glass. Method for the determination of annealing point and strain point by beam bending
BS EN 993-12:1997 Methods of test for dense shaped refractory products. Determination of pyrometric cone equivalent (refractoriness)
BS EN ISO 1893:2008 Refractory products - Determination of refractoriness under load - Differential method with rising temperature
BS 7034-7:1989 Viscosity and viscometric fixed points of glass. Method for the determination of annealing point and strain point by beam bending
BS EN 993-20:2004 Methods of test for dense shaped refractory products - Determination of resistance to abrasion at ambient temperature
BS 1902-5.14:1992 Methods of testing refractory materials - Refractory and thermal properties - Determination of thermal expansion (temperatures up to 1500 °C) (methods 1902-5.14)
BS EN 60695-2-13:2010+A1:2014 Fire hazard testing - Glowing/hot-wire based test methods. Glow-wire ignition temperature (GWIT) test method for materials
BS EN 993-6:2018 Methods of test for (dense) shaped refractory products - Determination of modulus of rupture at ambient temperature
BS 6481:1984 Method for determination of effective depth of hardening of steel after flame or induction hardening
BS 1902 Sec.5.14:1992 Methods of testing refractory materials. Refractory and thermal properties. Determination of thermal expansion (temperatures up to 1500C) (methods 1902-5.14)
BS 1902-4.6:1985 Methods of testing refractory materials - Properties measured under an applied stress - Determination of resistance to abrasion at ambient temperature (abradability index at ambient temperature) (method 1902-406)
BS EN 12697-13:2017 Bituminous mixtures. Test methods. Temperature measurement
BS 1902 Sec.4.6:1985 Methods of testing refractory materials. Properties measured under an applied stress. Determination of resistance to abrasion at ambient temperature (abradability index at ambient temperature) (method 1902-406)

Taiwan Provincial Standard of the People's Republic of China, Annealing temperature method

CNS 617-1998 Method for determination of pyrometric cone equivalent (retractoriness) of refractory products

Professional Standard - Military and Civilian Products, Annealing temperature method

WJ 1905-1990 Determination of pyrotechnic combustion agent flame temperature by thermal radiation method
WJ 1953-1990 Measuring Method of Shock Acceleration of Artillery

Professional Standard - Electron, Annealing temperature method

SJ/T 11039-1996 Test method for annealing point and strain point of electronic glass
SJ/T 31198-1994 Requirements of readiness and methods of inspection and assessment for glass bulb annealing furnaces
SJ/T 31185-1994 Requirements of readiness and methods of inspection and assessment for hydrogen annealing furnaces
SJ/T 31222-1994 Requirements of readiness and methods of inspection and assessment for filament annealing furnaces and filament sintering furnaces
SJ 2858-1988 Method for measurement of thermoelectric refrigeration modules properties--Test method for temperature difference and maximum cold side temperature
SJ 2709-1986 Methods of measurement for temperature of printed board assemblies
SJ/T 10459-1993 Measurement method for temperature coefficients of solar cell
SJ/T 11040-1996 Test method for viscosity of electronic glass at high temperature

Japanese Industrial Standards Committee (JISC), Annealing temperature method

JIS R 3103-2:2001 Viscosity and viscometric fixed points of glass -- Part 2: Determination of annealing point and strain point by fiber elongation
JIS R 2206 AMD 1:2005 Testing method for cold crushing strength of refractory bricks (Amendment 1)
JIS Z 8707:1992 Method of temperature measurement by filled-system thermometers and bimetallic thermometers
JIS R 2204:1991 Testing method for refractoriness of refractory brick
JIS Z 8705:1992 Method of temperature measurement by liquid-in-glass thermometers
JIS Z 8706:1980 Methods of temperature measurement by optical pyrometers
JIS Z 8704:1993 Temperature measurement -- Electrical methods
JIS Z 8705 AMD 1:2006 Method of temperature measurement by liquid-in-glass thermometers (Amendment 1)
JIS Z 8725:1987 Methods for determining distribution temperature and colour temperature or correlated colour temperature of light sources
JIS H 7851:2005 Testing method for heat resistance under temperature gradient
JIS C 1612:2000 Test methods for radiation thermometers
JIS R 2502:1976 Testing method for grain size of refractory mortar
JIS Z 8725:2015 Methods for determining distribution temperature and colour temperature or correlated colour temperature of light sources
JIS Z 8725:1999 Methods for determining distribution temperature and color temperature or correlated color temperature of light sources
JIS R 2207:1976 Test method for the rate of linear change of refractory brick on heating
JIS K 7216:1980 Testing method for brittleness temperature of plastics
JIS Z 2252:1991 Test methods for Vickers hardness at elevated temperatures
JIS K 7121:1987 Testing methods for transition temperatures of plastics
JIS R 2204:1999 Test method for refractoriness of refractories and raw materials
JIS R 2573:1991 Testing method for refractoriness of fireclay plastic refractories
JIS A 1156:2006 Method of measurement for temperature of fresh concrete
JIS R 2656:1995 Testing method for modulus of rupture of refractory bricks and insulating fire bricks at elevated temperature
JIS L 0878:1995 Test methods for colour fastness to high temperature steaming
JIS R 2552:1977 Testing method for grain size of castable refractories
JIS R 1606:1995 Testing methods for tensile strength of fine ceramics at room and elevated temperature

Group Standards of the People's Republic of China, Annealing temperature method

T/YXNX 003-2021 Quality control method for testing results of refractoriness under load of refractories (non-differential,with rising temperature)
T/DAWS 0004-2019 Cold chain logistics temperature and humidity control requirements and temperature measurement methods
T/CSTM 00989-2023 Test method for microwave parameters under high temperature, low temperature, temperature cycling and humidity
T/CSTM 00188-2021 Test method for optimum service temperature and related life of insulating refractories — Calorimeter
T/HNIMA 002-2023 Calibration method of soldering furnace temperature parameters
T/JLA 005-2023 Performance evaluation method for the surface temperature source
T/SJZSYYQXH JZ008-2023 Calibration method of low temperature temperature tester
T/CSTM 00189-2021 Refractory materials — Determination of poisson ratio at room temperature — Static compressive method
T/HOMETEX 21-2021 Method for measuring comfort temperature of quilt
T/CSO 1-2021 In situ comparison method of CTD profiler
T/JAR 005/2-2022 Testing method of energy efficiency for temperature shock test chamber
T/JAR 005/1-2022 Testing method of energy efficiency for temperature shock test chamber
T/CDJL 002-2023 Calibration method of online temperature and humidity measurement system

CZ-CSN, Annealing temperature method

CSN 64 0816-1986 Thermoplastic fittings. Methods of determination of appearance changes after annealing.
CSN 65 2084-1984 Sodium carbonate technical Method for determination of lose by annealing
CSN 64 0815-1986 Thermoplastic pipes. Methods for determination of longitudlnal reversion after annealing
CSN 65 0311-1981 Method for determination of rystallization temperature
CSN 99 3141-1988 Technical glass thermometers for temperature range from -90 to +600 φC. Methods of verification
CSN 25 8307-1980 Industrial resistance temperature sensors. Methods of verification

ES-UNE, Annealing temperature method

UNE-EN ISO 1893:2008 Refractory products - Determination of refractoriness under load - Differential method with rising temperature (ISO 1893:2007) (Endorsed by AENOR in August of 2008.)
UNE-EN ISO 16282:2008 Methods of test for dense shaped refractory products - Determination of resistance to abrasion at ambient temperature (ISO 16282:2007) (Endorsed by AENOR in June of 2008.)

Danish Standards Foundation, Annealing temperature method

DS/EN ISO 1893:2008 Refractory products - Determination of refractoriness under load - Differential method with rising temperature
DS/EN 993-12:1998 Methods of test for dense shaped refractory products - Part 12: Determination of pyrometric cone equivalent (refractoriness)
DS/EN 60695-2-13:2011 Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials
DS/EN IEC 60695-2-13:2021 Fire hazard testing – Part 2-13: Glowing/hot-wire based test methods – Glow-wire ignition temperature (GWIT) test method for materials
DS/EN ISO 16282:2008 Methods of test for dense shaped refractory products - Determination of resistance to abrasion at ambient temperature
DS/ISO 1392:1986 Determination of crystallizing point — General method

SE-SIS, Annealing temperature method

SIS 64 41 11-1969 Thermometers. Test methods

KR-KS, Annealing temperature method

KS C IEC 60695-2-13-2017 Fire hazard testing — Part 2-13: Glowing/hot-wire based test methods — Glow-wire ignition temperature(GWIT) test method for materials
KS C IEC 60695-2-13-2023 Fire hazard testing — Part 2-13: Glowing/hot-wire based test methods — Glow-wire ignition temperature(GWIT) test method for materials
KS C IEC 61241-2-1-2003(2023)
KS D 0027-2002(2017)(英文版) Methods of measuring case depth for steel hardened by flame or induction hardening process

International Organization for Standardization (ISO), Annealing temperature method

ISO 1893:2007 Refractory products - Determination of refractoriness under load - Differential method with rising temperature
ISO 7884-7:1987 Glass; Viscosity and viscometric fixed points; Part 7 : Determination of annealing point and strain point by beam bending
ISO 1893:2005 Refractory products - Determination of refractoriness-under-load - Differential method with rising temperature
ISO 5925-1:1981 Fire tests; Evaluation of performance of smoke control door assemblies; Part 1 : Ambient temperature test
ISO/CD 18386 Soil quality — Screening method for soil temperature — Measurement by IR thermometer

AENOR, Annealing temperature method

UNE 22330:1992 COAL DUST EXPLOSIBILITY. TEST METHOD FOR DETERMINING THE MINIMUM IGNITION TEMPERATURE IN A LAYER.
UNE-EN 993-12:1997 METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS. PART 12: DETERMINATION OF PYROMETRIC CONE EQUIVALENT (REFRACTORINESS).
UNE-EN 60695-2-13:2011 Fire hazard testing -- Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials
UNE-EN 60695-2-13:2011/A1:2014 Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials
UNE-EN 60360:1999 STANDARD METHOD OF MEASUREMENT OF LAMP CAP TEMPERATURE RISE.

VN-TCVN, Annealing temperature method

TCVN 6530-6-1999 Refractories.Methods of test.Part 6: Determination of refractoriness-under-load
TCVN 6530-1-1999 Refractories.Methods of test.Part 1: Determination of cold compressive strength
TCVN 4557-1988 Waste water.Method for the determination of the temperature

Lithuanian Standards Office , Annealing temperature method

LST EN 993-12-2001 Methods of test for dense shaped refractory products - Part 12: Determination of pyrometric cone equivalent (refractoriness)
LST EN ISO 1893:2008 Refractory products - Determination of refractoriness under load - Differential method with rising temperature (ISO 1893:2007)
LST EN 60695-2-13-2011 Fire hazard testing -- Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials (IEC 60695-2-13:2010)
LST EN ISO 16282:2008 Methods of test for dense shaped refractory products - Determination of resistance to abrasion at ambient temperature (ISO 16282:2007)

GM North America, Annealing temperature method

GM GMN11192-2011 High Strength Recovery Annealed Cold Reduced Sheet Steel (Issue 4; Do Not Use on New Programs; No Replacement)

Professional Standard - Geology, Annealing temperature method

DZ/T 0064.3-2021 Groundwater Quality Analysis Methods Part 3: Determination of Temperature Thermometer (Pyrometer) Method
DZ/T 0064.3-1993 Determination of temperature in underground water quality inspection method

Association of German Mechanical Engineers, Annealing temperature method

VDI/VDE 3511 Blatt 1-1996 Temperature measurement in industry - Principles and special methods of temperature measurement
VDI/VDE 3511 Blatt 4.3-2005 Temperature measurement in industrie - Radiation thermometry - Standard test methods for radiation thermometers with one wavelenght range

Professional Standard - Non-ferrous Metal, Annealing temperature method

YS/T 121.4-1992 Heat balance test and calculation method of flame heating furnace and annealing furnace in non-ferrous metal processing enterprises
YS/T 121.8-1992 Non-ferrous metal processing enterprises resistance annealing heat balance test and calculation method
YS/T 516-2012 Determination method for secondary recrystallization temperature of tungsten wire
YS/T 516-2006 Measuring method of secondary recrystallization temperature of tungsten wire

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Annealing temperature method

ASHRAE 41.1-1986 Standard Method for Temperature Measurement
ASHRAE 41.1-2013 Standard Method for Temperature Measurement

American National Standards Institute （ANSI), Annealing temperature method

ANSI/ASHRAE 41.1-2013 Standard Method for Temperature Measurement
ANSI/SCTE 72-2002 Test Method for Axial Load Temperature
ANSI/ASTM E2187:2009 Test Method for Measuring the Ignition Strength of Cigarettes

European Committee for Standardization (CEN), Annealing temperature method

EN 993-6:1995 Methods of test for dense shaped refractory products - Part 6: Determination of modulus of rupture at ambient temperatur
EN 993-5:1998 Methods of test for dense shaped refractory products - Part 5: Determination of cold crushing strength
EN 993-10:1997 Methods of Test for Dense Shaped Refractory Products - Part 10: Determination of Permanent Change in Dimensions on Heating

CEN - European Committee for Standardization, Annealing temperature method

EN 993-6:2018 Methods of test for (dense) shaped refractory products - Part 6: Determination of modulus of rupture at ambient temperature
EN 993-5:2018 Methods of test for dense shaped refractory products - Part 5: Determination of cold crushing strength
EN 993-20:2004 Methods of test for dense shaped refractory products - Part 20: Determination of resistance to abrasion at ambient temperature

Professional Standard - Commodity Inspection, Annealing temperature method

SN/T 1731.8-2006 Safety performance test for pyrotechnic composition used for export fireworks and firecrackers--Part 8: Igniting temperature

International Electrotechnical Commission (IEC), Annealing temperature method

IEC 60695-2-13:2021 Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials
IEC 60695-2-12:2021 Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials
IEC 60695-2-13:2021 RLV Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials
IEC 60695-2-13:2010+AMD1:2014 CSV Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials

Professional Standard - Public Safety Standards, Annealing temperature method

GA/T 714-2007 Rapid rise fire test methods of fire protection materials for structural elements

应急管理部, Annealing temperature method

XF/T 714-2007 Test method for rapid heating fire resistance of fire protection materials for components

Hebei Provincial Standard of the People's Republic of China, Annealing temperature method

DB13/T 1702-2013 Digital display temperature and humidity meter test method

Shandong Provincial Standard of the People's Republic of China, Annealing temperature method

DB37/T 2399-2013 Indoor air temperature measurement method

中华全国供销合作总社, Annealing temperature method

GH/T 1099-2014 Test method for temperature and humidity of seed cotton stacks

Professional Standard-Safe Production, Annealing temperature method

AQ/T 4123-2014 Method for testing pyrotechnics flame sensitivity for Fireworks
AQ/T 4120-2011 Pyrotechnics composition used for fireworks and firecrackers test method for sensitivity to electrostatic spark
AQ/T 4118-2011 Fireworks and firecrackers.brisance test method for pyrotechnics

Tianjin Provincial Standard of the People's Republic of China, Annealing temperature method

DB12/T 443-2011 Indoor Temperature Measurement Method in Heating Period

邯郸市, Annealing temperature method

DB1304/T 390-2022 Detection method of mining temperature sensor

AIA/NAS - Aerospace Industries Association of America Inc., Annealing temperature method

NASM1312-18-1997 Fastener Test Methods; Method 18 Elevated Temperature Tensile Strength

Malaysia Standards, Annealing temperature method

Professional Standard - Machinery, Annealing temperature method

JB/T 9588.4-1999 Test method for ceramic insulators of spark plug.Test method for heat insulating resistance
JB/T 8986-1999 Mehtods of measurement of temperature coefficient of permanent magnet materials
JB/T 8842.2-1999 Temperature alarm for internal-combustion engine - Test method

Professional Standard - Automobile, Annealing temperature method

QC/T 435-1999 Test method for spark plug porcelain insulator High temperature insulation resistance test method

Professional Standard - Ocean, Annealing temperature method

HY/T 268-2018 Testing method of ocean temperature measuring instrument

HU-MSZT, Annealing temperature method

MSZ KGST 1058-1978

PL-PKN, Annealing temperature method

PN M53802-1960 Thermometets for Te??lng Flash - Point by th? Marcus*on Me?hod
PN C89025-1990 Plastics Determination of temperatur? of deflection by Martens method
PN E04030-1992 Standard method of measurement of lamp cap temperature rise
PN M53801-1960 Thermomefers for Testing Flash-Poin? by the Abal- Pen$ky Me?hod
PN A86919-1960 Eatable vegetable fats. Testing methods. Deter- mination of the tempe- rature of softening point and of fuli clarification

National Metrological Technical Specifications of the People's Republic of China, Annealing temperature method

JJF 1257-2010 Calibration Guideline of the Temperature Block Calibrators

中华人民共和国国家卫生和计划生育委员会, Annealing temperature method

GB/T 18204.28-2000 Method for determination of temperature in water of swimming place

Professional Standard - Aviation, Annealing temperature method

HBm 66.47-1990 Test method for instrument temperature of miniature trucks
HB 6623.2-1992 Metallographic method for determination of beta transition temperature of titanium alloy
HB 5830.16-1997 Environmental conditions and test methods for airborne equipment temperature-humidity-altitude
HB 20057-2011 Test methods for estimating grain size of superalloy investment castings
HB 5830.17-1997 Airborne Equipment Environmental Conditions and Test Methods Temperature-Altitude

Fujian Provincial Standard of the People's Republic of China, Annealing temperature method

DB35/T 1502-2015 Comprehensive Strength Evaluation Method for High Temperature Process

工业和信息化部, Annealing temperature method

JB/T 14409-2022 Test method for solder melting temperature range
SJ/T 2709-2016 Temperature test method for printed board assemblies
HG/T 5841-2021 Method for determination of thermal decomposition temperature of chlorinated paraffin

Society of Automotive Engineers (SAE), Annealing temperature method

SAE AMS4902G-2001 Titanium Sheet, Strip, and Plate Commercially-Pure Annealed 40.0 ksi (276 MPa) Yield Strength

未注明发布机构, Annealing temperature method

GJB 150.19-1986 Environmental test methods for military equipment temperature-humidity-altitude test
GJB 150.6-1986 Environmental test methods for military equipment temperature-altitude test
BS 1902-4.6:1985(2009) Methods of testing Refractory materials — Part 4 : Properties measured under an applied stress — Section 4.6 Determination of resistance to abrasion at ambient temperature (abradability index at ambient temperature) (method 1902 - 406)

SG-SPRING SG, Annealing temperature method

SS 254 Pt.7-1982 SPECIFICATION FOR Electrical Apparatus for Explosive Gas Atmospheres Part 7 : Method of Test for Ignition Temperature

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Annealing temperature method

ASHRAE 4139-1998 A Simple Methodology to Predict Local Temperature and Humidity

Aerospace Industries Association, Annealing temperature method

AIA NASM1312-18-1997 Fastener Test Methods; Method 18 Elevated Temperature Tensile Strength FSC 53GP

Professional Standard - Business, Annealing temperature method

SB/T 10928-2012 Temperature measurement in perishable food cold chain

API - American Petroleum Institute, Annealing temperature method

API STD 2543-1965 Method of Measuring the Temperature of Petroleum and Petroleum Products

Professional Standard - Nuclear Industry, Annealing temperature method

EJ/T 903.8-1994 Scintillator Performance Measurement Method Temperature Effect

Professional Standard-Ships, Annealing temperature method

CB 1171.4-1987 Environmental measurement method for ship equipment temperature and humidity

Professional Standard - Petroleum, Annealing temperature method

SY/T 6010-1994 Method for determination of homogeneous temperature and salinity of sedimentary rock inclusions

Aerospace Industries Association/ANSI Aerospace Standards, Annealing temperature method

AIA/NAS NASM1312-18-1997 Fastener Test Methods; Method 18 Elevated Temperature Tensile Strength

Electronic Components, Assemblies and Materials Association, Annealing temperature method

ECA 448-20-1989 Method 20 Test Method for Electromechanical Components Test Method for Lens Face Touch Temperature