ZH
RU
ES

Annealing temperature 44 degrees

Annealing temperature 44 degrees, Total:244 items.

In the international standard classification, Annealing temperature 44 degrees involves: Glass, Products of non-ferrous metals, Electrical wires and cables, Refractories, Aerospace fluid systems and components, Farming and forestry, Coals, Construction materials, Materials for aerospace construction, Protection against fire, Plastics, Fuels, Burners. Boilers, Explosion protection, Products of the chemical industry, Protection against dangerous goods, Petroleum products in general, Non-ferrous metals, Electrical equipment for working in special conditions, Iron and steel products.

Association Francaise de Normalisation, Annealing temperature 44 degrees

NF B30-105:1972 Determination of annealing point and strain point of glass.
NF B40-320*NF ISO 22685:2022 Refractory products - Determination of compressive strength at elevated temperature
NF ISO 22685:2022 Produits réfractaires - Détermination de la résistance à la compression à température élevée
NF S66-260:2005 Determination of the auto ignition temperature of gases and vapours.
NF B40-315*NF EN ISO 1893:2009 Refractory products - Determination of refractoriness under load - Differential method with rising temperature
NF EN ISO 8895:2006 Produits réfractaires isolants façonnés - Détermination de la résistance à l'écrasement à température ambiante
NF EN ISO 1893:2009 Produits réfractaires - Détermination de l'affaissement sous charge - Méthode différentielle avec élévation de la température

ES-AENOR, Annealing temperature 44 degrees

UNE 36-034-1985

SAE - SAE International, Annealing temperature 44 degrees

SAE AMS4555A-1947 BRASS TUBING Light Annealed
SAE AMS4555-1941 BRASS TUBING Light Annealed
SAE AMS4555E-1983 BRASS TUBING@ SEAMLESS 68Cu - 31Zn Light Annealed (UNS C33000)
SAE AMS4555F-1989 BRASS TUBING@ SEAMLESS 66.5Cu - 32.5Zn - 0.48Pb Light Annealed (050) (UNS C33000)
SAE AMS4942A-1976 TITANIUM TUBING@ SEAMLESS Annealed@ 40@000 psi (276 MPa) Yield Strength
SAE AMS4941B-1977 TITANIUM TUBING@ WELDED Annealed@ 40@000 psi (276 MPa) Yield Strength
SAE AMS4942B-1977 TITANIUM TUBING@ SEAMLESS Annealed@ 40@000 psi (276 MPa) Yield Strength
SAE AMS4941A-1974 TITANIUM TUBING@ WELDED Annealed@ 40@000 psi (276 MPa) Yield Strength
SAE AMS4942C-1984 Titanium Tubing@ Seamless Annealed@ 40@000 psi (275 MPa) Yield Strength
SAE AMS4941C-1984 Titanium Tubing@ Welded Annealed@ 40@000 psi (276 MPa) Yield Strength
SAE AMS4555D-1977 BRASS TUBING@ SEAMLESS 68Cu - 31Zn Light Annealed (UNS C26000; UNS C33000)
SAE AMS4942G-2018 Titanium Tubing@ Seamless Annealed@ 40.0 ksi (275 MPa) Yield Strength (UNS R50400)
SAE AMS4555G-1994 Leaded Brass@ Seamless Tubing 66.5Cu - 32.5Zn - 0.48Pb Light Annealed (050) (UNS C33000)
SAE AMS4901F-1977 TITANIUM SHEET@ STRIP@ AND PLATE Annealed@ 70@000 psi (483 Mpa) Yield Strength
SAE AMS4900E-1977 TITANIUM SHEET@ STRIP@ AND PLATE Annealed 55@000 psi (379 Mpa) Yield Strength
SAE AMS4901E-1972 TITANIUM SHEET@ STRIP@ AND PLATE Annealed@ 70@000 psi (483 Mpa) Yield Strength
SAE AMS4921D-1977 TITANIUM BARS@ FORGINGS@ AND RINGS Annealed@ 70@000 psi (483 MPa) Yield Strength
SAE AMS4966F-1977 Titanium Alloy Forgings 5Al - 2.5Sn Annealed@ 110@000 psi (758 MPa) Yield Strength
SAE AMS4966D-1972 Titanium Alloy Forgings 5Al - 2.5Sn Annealed@ 110@000 psi (758 MPa) Yield Strength
SAE AMS4921C-1976 Titanium Bars@ Wire@ Forgings@ and Rings Annealed@ 70@000 psi (483 MPa) Yield Strength
SAE AMS4901K-1986 TITANIUM SHEET@ STRIP@ AND PLATE Annealed@ 70@000 psi (485 Mpa) Yield Strength (UNS R50700)
SAE AMS4900G-1984 TITANIUM SHEET@ STRIP@ AND PLATE Annealed@ 55@000 psi (380 Mpa) Yield Strength (UNS R50550)
SAE AMS4902D-1986 TITANIUM SHEET@ STRIP@ AND PLATE Annealed 40@000 psi (275 MPa) Yield Strength (UNS R50400)
SAE AMS4901J-1984 TITANIUM SHEET@ STRIP@ AND PLATE Annealed@ 70@000 psi (485 Mpa) Yield Strength (UNS R50700)
SAE AMS4901H-1978 TITANIUM SHEET@ STRIP@ AND PLATE Annealed@ 70@000 psi (483 Mpa) Yield Strength (UNS R50700)
SAE AMS4900H-1986 TITANIUM SHEET@ STRIP@ AND PLATE Annealed@ 55@000 psi (380 Mpa) Yield Strength (UNS R50550)
SAE AMS4901L-1986 TITANIUM SHEET@ STRIP@ AND PLATE Annealed@ 70@000 psi (485 Mpa) Yield Strength (UNS R50700)
SAE AMS4921F-1985 Titanium Bars@ Wire@ Forgings@ and Rings Annealed@ 70@000 psi (483 MPa) Yield Strength
SAE AMS4901G-1977 TITANIUM SHEET@ STRIP@ AND PLATE Annealed@ 70@000 psi (483 Mpa) Yield Strength (UNS R50700)
SAE AMS4921E-1979 Titanium Bars@ Forgings@ and Rings Annealed@ 70@000 psi (483 MPa) Yield Strength (UNS R50700)
SAE AMS4900J-1986 TITANIUM SHEET@ STRIP@ AND PLATE Annealed@ 55@000 psi (380 Mpa) Yield Strength (UNS R50550)
SAE AMS4900F-1977 TITANIUM SHEET@ STRIP@ AND PLATE Annealed 55@000 psi (379 Mpa) Yield Strength (UNS R50550)
SAE AMS4902C-1980 TITANIUM SHEET@ STRIP@ AND PLATE Annealed 40@000 psi (276 MPa) Yield Strength (UNS R50400)
SAE AMS4926E-1976 TITANIUM ALLOY BARS AND RINGS 5Al - 2.5Sn Annealed@ 110@000 psi (758 MPa) Yield Strength
SAE AMS4966R-2017 Titanium Alloy@ Forgings 5Al - 2.5Sn Annealed@ 110 ksi (758 MPa) Yield Strength (UNS R54520)
SAE AMS4966L-1998 Titanium Alloy@ Forgings 5AI - 2.5Sn Annealed@ 110 ksi (758 MPa) Yield Strength (UNS R54520)
SAE AMS4966K-1994 Titanium Alloy@ Forgings 5Al - 2.5Sn Annealed@ 110 ksi (758 MPa) Yield Strength (UNS R54520)
SAE AMS4926F-1977 Titanium Alloy Bars and Rings 5A1 - 2.5Sn Annealed@ 110@000 psa (758 MPa) Yield Strength
SAE AMS4902E-1986 TITANIUM SHEET@ STRIP AND PLATE Annealed 40@000 psi (275 MPa) Yield Strength (UNS R50400)
SAE AMS4966J-1988 Titanium Alloy@ Forgings 5Al - 2.5Sn Annealed@ 110@000 psi (758 MPa) Yield Strength (UNS R54520)
SAE AMS4966H-1983 Titanium Alloy Forgings 5Al - 2.5Sn Annealed@ 110@000 psi (760 MPa) Yield Strength (UNS R54520)
SAE AMS4966G-1979 Titanium Alloy Forgings 5Al - 2.5Sn Annealed@ 110@000 psi (758 MPa) Yield Strength (UNS R54520)
SAE AMS4900K-1991 Titanium Sheet@ Strip@ and Plate Commercially Pure Annealed@ 55.0 ksi (379 MPa) Yield Strength
SAE AMS4908F-1994 Titanium Alloy@ Sheet and Strip 8Mn Annealed@ 110 ksi (758 MPa) Yield Strength (UNS R56080)
SAE AMS4926G-1983 Titanium Alloy Bars and Rings 5A1 - 2.5Sn Annealed@ 110@000 psi (760 MPa) Yield Strength (UNS R54520)
SAE AMS4926H-1988 Titanium Alloy Bars and Rings 5Al - 2.5Sn Annealed@ 110@000 psi (760 MPa) Yield Strength (UNS R54520)
SAE AMS5315E-2017 Ductile (Nodular) Iron Castings@ Sand 60000 psi (415 MPa) Tensile Strength Ferritize Annealed (UNS F33101)
SAE AMS4908G-2003 Titanium Alloy@ Sheet and Strip 8Mn Annealed@ 110 ksi (758 MPa) Yield Strength (UNS R56080)
SAE AMS4908E-1988 TITANIUM ALLOY SHEET AND STRIP 8Mn Annealed@ 110@000 psi (760 Mpa) Yield Strength (UNS R56080)
SAE AMS4908D-1981 TITANIUM ALLOY SHEET AND STRIP 8Mn Annealed@ 110@000 psi (760 Mpa) Yield Strength (UNS R56080)
SAE AMS4902F-1991 Titanium Sheet@ Strip@ and Plate Commercially- Pure Annealed 40.0 ksi (276 MPa) Yield Strength (UNS R50400)
SAE AMS5315D-1992 Ductile (Nodular) Iron Castings@ Sand 60@000 psi (415 MPa) Tensile Strength Ferritize Annealed (UNS F33101)
SAE AMS4902L-2018 Titanium Sheet@ Strip@ and Plate Commercially Pure Annealed 40.0 ksi (276 MPa) Yield Strength (UNS R50400)
SAE AMS4940C-2017 Titanium Sheet@ Strip@ and Plate Commercially Pure Annealed@ 25.0 ksi (172 MPa) Yield Strength (UNS R50250)
SAE AMS4900N-2010 Titanium Sheet@ Strip@ and Plate Commercially Pure Annealed@ 55 ksi (379 MPa) Yield Strength (UNS R50550)
SAE AMS4900R-2019 Titanium Sheet@ Strip@ and Plate Commercially Pure Annealed@ 55 ksi (379 MPa) Yield Strength (UNS R50550)
SAE AMS5548K-1995 Steel@ Corrosion and Heat Resistant@ Sheet and Strip 16.5Cr - 4.5Ni - 2.9Mo - 0.10N 1850 to 1975 Degrees F (1010 to 1079 Degrees C) Annealed (UNS S35000)
SAE AMS4926J-1994 Titanium Alloy@ Bars@ Wire@ and Rings 5Al - 2.5Sn Annealed@ 110 ksi (758 MPa) Yield Strength (UNS R54520)
SAE AMS4926N-2015 Titanium Alloy@ Bars@ Wire@ and Rings 5Al - 2.5Sn Annealed@ 110 ksi (758 MPa) Yield Strength (UNS R54520)
SAE AMS4928J-1984 Titanium Alloy Bars@ Forgings@ and Rings 6Al - 4V Annealed@ 120@000 psi (825 MPa) Yield Strength (UNS R56400)
SAE AMS4963D-2016 Titanium Alloy@ Bars@ Wire@ Forgings@ and Rings 6.0Al - 4.0V Annealed@ Heat Treatable@ Modified Strength (UNS R56400)
SAE AMS4928K-1984 Titanium Alloy Bars@ Forgings@ and Rings@ 6Al - 4V Annealed@ 120@ 000 psi (825 MPa) yield strength (UNS R56400)
SAE AMS4963-1995 Titanium Alloy@ Bars@ Wire@ Forgings@ and Rings 6.0Al - 4.0V Annealed@ Heat Treatable@ Modified Strength (UNS R56400)

CZ-CSN, Annealing temperature 44 degrees

CSN 65 0321-1968 Ignition temperature
CSN ISO 528:1994 Refractory products.Determination of pyrometric cone equivalent(refractoriness)
CSN ISO 1893:1994 Refractory products.Determination of refractoriness-under-load(differential-with rising temperature)
CSN 25 8145-1988 Thermometers for testing of mineral oils Flash and Fire points by Cleveland open cup

Japanese Industrial Standards Committee (JISC), Annealing temperature 44 degrees

JIS R 3103-2:2001 Viscosity and viscometric fixed points of glass -- Part 2: Determination of annealing point and strain point by fiber elongation

American Society for Testing and Materials (ASTM), Annealing temperature 44 degrees

ASTM B68/B68M-11 Standard Specification for Seamless Copper Tube, Bright Annealed
ASTM B609/B609M-12e1 Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
ASTM B800-00 Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes-Annealed and Intermediate Tempers
ASTM B609/B609M-99(2010) Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
ASTM B800-05(2021) Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes—Annealed and Intermediate Tempers
ASTM B609/B609M-12(2016) Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
ASTM B800-05(2015) Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes&x2014;Annealed and Intermediate Tempers
ASTM E814-11 Standard Test Method for Fire Tests of Penetration Firestop Systems
ASTM D1929-19 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D1929-20 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D1929-14 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM E2021-15(2023) Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers
ASTM D1929-16 Standard Test Method for Determining Ignition Temperature of Plastics

International Organization for Standardization (ISO), Annealing temperature 44 degrees

ISO/R 1893:1970 Refractory products — Determination of refractoriness under load (Differential — With rising temperature)
ISO 528:1983 Refractory products; Determination of pyrometric cone equivalent (refractoriness)
ISO 871:2006 Plastics - Determination of ignition temperature using a hot-air furnace
ISO 871:2022 Plastics — Determination of ignition temperature using a hot-air furnace
ISO 7884-7:1987 Glass; Viscosity and viscometric fixed points; Part 7 : Determination of annealing point and strain point by beam bending
ISO 5013:1985 Refractory products; Determination of modulus of rupture at elevated temperatures
ISO 1893:2007 Refractory products - Determination of refractoriness under load - Differential method with rising temperature
ISO 22685:2021 Refractory products — Determination of compressive strength at elevated temperature
ISO 8895:1986 Shaped insulating refractory products; Determination of cold crushing strength
ISO 8895:2004 Shaped insulating refractory products - Determination of cold crushing strength
ISO 1893:2005 Refractory products - Determination of refractoriness-under-load - Differential method with rising temperature

Society of Automotive Engineers (SAE), Annealing temperature 44 degrees

SAE AMS4942D-2001 Titanium Tubing, Seamless Annealed, 40,000 psi (275 MPa) Yield Strength
SAE AMS4942E-2006 Titanium Tubing, Seamless Annealed, 40,000 psi (275 MPa) Yield Strength
SAE AMS4941D-2003 Titanium Tubing, Welded Annealed, 40 ksi (276 MPa) Yield Strength
SAE AMS4942C-1994 TITANIUM TUBING, SEAMLESS Annealed, 40,000 psi (275 MPa) Yield Strength
SAE AMS4941C-1994 Titanium Tubing, Welded Annealed, 40,000 psi (275 MPa) Yield Strength
SAE AMS4942H-2022 Titanium Tubing, Seamless Annealed, 40.0 ksi (275 MPa) Yield Strength
SAE AMS4555H-2006 Leaded Brass, Seamless Tubing 66.5Cu - 32.5Zn - 0.48Pb Light Annealed (050)
SAE AMS4901-1952 TITANIUM SHEET AND STRIP Annealed - 70,000 psi Yield
SAE AMS4966M-2003 Titanium Alloy, Forgings 5Al 2.5Sn Annealed, 110 ksi (758 MPa) Yield Strength
SAE AMS4966N-2008 Titanium Alloy, Forgings 5Al 2.5Sn Annealed, 110 ksi (758 MPa) Yield Strength
SAE AMS4555K-2015 Leaded Brass@ Seamless Tubing 66.5Cu - 32.5Zn - 0.48Pb Light Annealed (050) (UNS C33000)
SAE AMS4966J-1993 TITANIUM ALLOY FORGINGS 5Al - 2.5Sn Annealed, 110,000 psi (758 MPa) Yield Strength
SAE AMS4966S-2022 Titanium Alloy, Forgings 5Al - 2.5Sn Annealed, 110 ksi (758 MPa) Yield Strength
SAE AMS4555L-2021 Leaded Brass, Seamless Tubing 66.5Cu - 32.5Zn - 0.48Pb Light Annealed (O50) (UNS C33000)
SAE AMS4908F-1988 Titanium Alloy Sheet and Strip, 8Mn, Annealed, 110 ksi (760 MPa) Yield Strength
SAE AMS4941E-2008 Titanium Tubing, Welded Annealed, 40 ksi (276 MPa) Yield Strength UNS R50400
SAE AMS4966P-2013 Titanium Alloy, Forgings 5Al 2.5Sn Annealed, 110 ksi (758 MPa) Yield Strength
SAE AMS4908E-1993 TITANIUM ALLOY SHEET AND STRIP 8Mn Annealed, 110,000 psi (760 MPa) Yield Strength
SAE AMS5315C-2011 DUCTILE (NODULAR) IRON CASTINGS, SAND 60,000 psi (415 MPa) Tensile Strength Ferritize Annealed
SAE AMS5315D-2013 Ductile (Nodular) Iron Castings, Sand 60,000 psi (415 MPa) Tensile Strength Ferritize Annealed
SAE AMS4940D-2023 Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 25.0 ksi (172 MPa) Yield Strength
SAE AMS4902M-2023 Titanium Sheet, Strip, and Plate Commercially Pure Annealed 40.0 ksi (276 MPa) Yield Strength
SAE AMS4926P-2019 Titanium Alloy, Bars, Wire, and Rings 5Al - 2.5Sn Annealed, 110 ksi (758 MPa) Yield Strength
SAE AMS4940-2003 Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 25.0 ksi (172 MPa) Yield Strength
SAE AMS4926L-2007 Titanium Alloy, Bars, Wire, and Rings, 5Al 2.5Sn, Annealed, 110 ksi (758 MPa) Yield Strength
SAE AMS4900K-1995 TITANIUM SHEET, STRIP, AND PLATE Commercially Pure Annealed, 55.0 ksi (379 MPa) Yield Strength
SAE AMS4902F-1995 TITANIUM SHEET, STRIP, AND PLATE Commercially-Pure Annealed 40.0 ksi (276 MPa) Yield Strength
SAE AMS4900S-2023 Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 55 ksi (379 MPa) Yield Strength
SAE AMS4900L-2001 Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 55.0 ksi (379 MPa) Yield Strength
SAE AMS4902J-2009 Titanium Sheet, Strip, and Plate Commercially-Pure Annealed 40.0 ksi (276 MPa) Yield Strength
SAE AMS4963C-2012 Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al 4.0V Annealed, Heat Treatable, Modified Strength
SAE AMS4940B-2012 Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 25.0 ksi (172 MPa) Yield Strength
SAE AMS4900P-2014 Titanium Sheet@ Strip@ and Plate Commercially Pure Annealed@ 55 ksi (379 MPa) Yield Strength (UNS R50550)
SAE AMS4963E-2020 Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al - 4.0V Annealed, Heat Treatable, Modified Strength
SAE AMS4901N-2002 Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 70 ksi (485 MPa)
SAE AMS4902H-2006 Titanium Sheet, Strip, and Plate Commercially-Pure Annealed 40.0 ksi (276 MPa) Yield Strength
SAE AMS4902K-2013 Titanium Sheet, Strip, and Plate, Commercially-Pure, Annealed 40.0 ksi (276 MPa) Yield Strength
SAE AMS4926K-2001 Titanium Alloy, Bars, Wire, and Rings, 5Al 2.5Sn, Annealed, 110 ksi (758 MPa) Yield Strength
SAE AMS4926M-2011 Titanium Alloy, Bars, Wire, and Rings, 5Al 2.5Sn, Annealed, 110 ksi (758 MPa) Yield Strength
SAE J2614-2009 Welded and Cold-Drawn, High Strength (500 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending and Flaring
SAE J2613-2009 Welded Flash Controlled, High Strength (500 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending, Double Flaring, and Bending
SAE AMS4963A-2003 Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al 4.0V Annealed, Heat Treatable, Modified Strength

PL-PKN, Annealing temperature 44 degrees

PN C89022-1969 Plastios Determination of the ignition temperatur?
PN C83602-13-1991 Fire extioguishing media Fire extinguishing powders Determination of resistance to Iow temperatur?

IN-BIS, Annealing temperature 44 degrees

IS 7820-1975

Heilongjiang Provincial Standard of the People's Republic of China, Annealing temperature 44 degrees

DB23/T 2582-2020 Technical Regulations for Restoration of Moderately Degraded Natural Temperate Grassland

Standard Association of Australia （SAA）, Annealing temperature 44 degrees

ZA-SANS, Annealing temperature 44 degrees

SANS 5909:1979 Refractoriness under load (with rising temperature) of refractory bricks
SANS 5908:1979 Pyrometric cone equivalent (refractoriness) of refractory bricks and materials
SANS 5919:1980 Modulus of rupture at elevated temperatures of dense refractory bricks
SANS 5920:1980 Modulus of rupture at room temperature of dense and insulating refractory bricks

Indonesia Standards, Annealing temperature 44 degrees

SNI 15-1783-1990 Chammote refractory mortars, hardened at high temperature

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Annealing temperature 44 degrees

GB/T 18511-2017 Determination of ignition temperature of coal
GB/T 34218-2017 Refractory products—Determination of compressive strength at elevated temperature
GB/T 34219-2017 Refractory matericals—Determination of tensile strength at room temperature
GB/T 34220-2017 Refractory Products—Determination of tensile strength at elevated temperature
GB/T 34217-2017 Refractory products—Determination of torsion strength at elevated temperature
GB/T 3001-2017 Refractory products—Determination of modulus of rupture at ambient temperature
GB/T 3002-2017 Refractory products—Determination of modulus of rupture at elevated temperatures

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Annealing temperature 44 degrees

GB/T 18511-2001 Determination of ignition temperature of coal
GB/T 16429-1996 Determination of the minimum ignition temperature of dust cloud
GB/T 19469-2004 Determination of ignition temperature of pyrotechnic composition-DTA-TG analysis
GB/T 16430-1996 Determination of the minimum ignition temperature of dust layer
GB/T 3002-1982 Test method for modulus of rupture of refractory products at elevated temperature
GB/T 5072-2008 Refractories.Determination of cold compressive strength
GB/T 3002-2004 Refractory products-Determination of modulus of rupture at elevated temperatures
GB/T 3001-2007 Refractory products.Determination of modulus of rupture at ambient temperature
GB/T 5989-1998 Refractory products--Determination of Refractoriness-under-load--Differential-with rising temperature
GB/T 5989-2023 Refractory products—Determination of refractoriness under load(differential method with rising temperature)
GB/T 5989-2008 Refractory products.Determination of refractoriness-under-load.Differential method with rising temperature
GB/T 3001-2000 Shaped refractory products-Determination of modulus of rupture at ambient temperature
GB/T 13243-1991 Test method for modulus of rupture of refactories containing carbon at elevated temperatures

ES-UNE, Annealing temperature 44 degrees

UNE-EN ISO 1893:2008 Refractory products - Determination of refractoriness under load - Differential method with rising temperature (ISO 1893:2007) (Endorsed by AENOR in August of 2008.)

German Institute for Standardization, Annealing temperature 44 degrees

DIN EN ISO 1893:2008-09 Refractory products - Determination of refractoriness under load - Differential method with rising temperature (ISO 1893:2007); German version EN ISO 1893:2008
DIN 54836:1984-02 Testing of combustible materials; determination of ignition temperature
DIN EN ISO 1893:2008 Refractory products - Determination of refractoriness under load - Differential method with rising temperature (ISO 1893:2007); German version EN ISO 1893:2008
DIN ISO 7884-7:1998 Glass - Viscosity and viscometric fixed points - Part 7: Determination of annealing point and strain point by beam bending (ISO 7884-7:1987)
DIN ISO 7884-7:1998-02 Glass - Viscosity and viscometric fixed points - Part 7: Determination of annealing point and strain point by beam bending (ISO 7884-7:1987)
DIN 51794:2003 Testing of mineral oil hydrocarbons - Determination of ignition temperature
DIN 12786:1981 Laboratory glassware; enclosed scale thermometers for measurements in heatengine generating stations
DIN EN ISO 8895:2006 Shaped insulating refractory products - Determination of cold crushing strength (ISO 8895:2004); English version of DIN EN ISO 8895:2006-09

HU-MSZT, Annealing temperature 44 degrees

Taiwan Provincial Standard of the People's Republic of China, Annealing temperature 44 degrees

CNS 617-1998 Method for determination of pyrometric cone equivalent (retractoriness) of refractory products

Professional Standard - Military and Civilian Products, Annealing temperature 44 degrees

WJ 1905-1990 Determination of pyrotechnic combustion agent flame temperature by thermal radiation method

Professional Standard - Aerospace, Annealing temperature 44 degrees

QJ 1230-1987 Estimation of Uncertainty in Temperature Measurement of Liquid Rocket Engine
QJ 2968-1997 Method for measuring medium and high temperature temperature of liquid rocket engine
QJ 1086-1986 Cryogenic temperature measurement specification for liquid rocket engine test
QJ 2902-1997 Solid rocket motor temperature test method
QJ 1647-1989 Specifications for surface temperature measurement of rocket motor tests

BR-ABNT, Annealing temperature 44 degrees

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Annealing temperature 44 degrees

ASHRAE 4399-2000 On the Temperatures in Forced-Ventilation Fires
ASHRAE LO-09-070-2009 Functional Exergy Efficiency at Near-Environmental Temperatures

Professional Standard - Electricity, Annealing temperature 44 degrees

DL/T 2148-2020 Method for Determination of Biomass Ignition Temperature
DL/T 1446-2015 Measurement of ignition temperature of pulverized coal-air flow
DL/T 2418-2021 Technical specifications for temperature measuring devices in thermal power plants

Professional Standard - Ferrous Metallurgy, Annealing temperature 44 degrees

YB/T 4024-1991 Test method for refractoriness under load of refractory mortars
YB 4024-1991 Test method for softening temperature of refractory mud under load (heating method)
YB/T 2208-1998 Test method for crushing strength of castable refractory at elevated temperature
YB 4022-1991 Test method for load softening temperature of refractory mud (differential-temperature rise method)
YB/T 5201-1993 Test method for room temperature flexural strength and compressive strength of dense refractory castables
YB/T 370-1995 Test method for refractoriness under load of refractory products (non-differential,with rising temperature)
YB/T 370-2016 Refractoies.Determination of refractoriness under load (non-differential, with rising temperature)
YB/T 2203-1998 Test method for refractoriness under load of castable refractory.Non-differential,with rising temperature

Danish Standards Foundation, Annealing temperature 44 degrees

DS/EN ISO 1893:2008 Refractory products - Determination of refractoriness under load - Differential method with rising temperature

Group Standards of the People's Republic of China, Annealing temperature 44 degrees

T/CCIAA 8-2021 Technical code for coke oven end flue temperature determination
T/CCIAA 13-2021 Technical code for coke oven adjacent flue temperature difference determination

国家市场监督管理总局、中国国家标准化管理委员会, Annealing temperature 44 degrees

GB/T 16430-2018 Determination of the minimum ignition temperature of dust layer
GB/T 38298-2019 Test method of auto-ignition temperature for solid chemicals

Korean Agency for Technology and Standards (KATS), Annealing temperature 44 degrees

KS M ISO 871:2019 Plastics — Determination of ignition temperature using a hot-air furnace
KS L ISO 7884-7:2014 Glass — Viscosity and viscometric fixed points — Part 7: Determination of annealing point and strain point by beam bending
KS L ISO 7884-7-2014(2019) Glass — Viscosity and viscometric fixed points — Part 7: Determination of annealing point and strain point by beam bending
KS C IEC 60079-4-2007(2017) Explosive atmospheres－Part 4：Method of test for ignition temperature
KS C IEC 60079-4-2007(2022) Explosive atmospheres－Part 4：Method of test for ignition temperature

KR-KS, Annealing temperature 44 degrees

KS M ISO 871-2019 Plastics — Determination of ignition temperature using a hot-air furnace

Military Standard of the People's Republic of China-General Armament Department, Annealing temperature 44 degrees

GJB 5021-2001 Solid rocket motor temperature test method
GJB 5309.27-2004 Test methods for pyrotechnics Part 27: Temperature shock test
GJB 8684.8-2015 Test methods for performance of pyrotechnics Part 8: Determination of flame temperature by thermal radiation method

British Standards Institution (BSI), Annealing temperature 44 degrees

BS 7034-7:1988 Viscosity and viscometric fixed points of glass. Method for the determination of annealing point and strain point by beam bending
BS EN ISO 1893:2008 Refractory products - Determination of refractoriness under load - Differential method with rising temperature
BS EN 14522:2005 Determination of the auto ignition temperature of gases and vapours
BS ISO 22685:2021 Refractory products. Determination of compressive strength at elevated temperature
20/30408795 DC BS ISO 24126. Refractory products. Determination of compressive strength at elevated temperature
20/30404776 DC BS ISO 871. Plastics. Determination of ignition temperature using a hot-air furnace
BS ISO 871:2022 Tracked Changes. Plastics. Determination of ignition temperature using a hot-air furnace

RU-GOST R, Annealing temperature 44 degrees

GOST ISO 1893-2014 Refractory products. Determination of refractoriness under load. Differential method with rising temperature
GOST R 55957-2014 Activated carbon. Standard test method for ignition temperature
GOST 4070-2000 Refractory products. Method for determination of refractoriness-under-load
GOST R 50526-1993 Refractory products. Determination of modulus of rupture at ambient temperature
GOST 25085-1981 Refractories. Method of determination for strength under bending at elevated temperatures

European Committee for Standardization (CEN), Annealing temperature 44 degrees

EN 14522:2005 Determination of the auto ignition temperature of gases and vapours

RO-ASRO, Annealing temperature 44 degrees

STAS 128/2-1981 Refractory products DIFFERFNTIAL DETFRMINATION OF COMPRESSION DEFORMATION TEMPERATFRE

YU-JUS, Annealing temperature 44 degrees

JUS U.J1.070-1986 Fire protection. Standard time-temperature curve in fire resistance test furnaces for constructions
JUS B.D8.303-1991 Refractories. Methods ofphysical testing. Determination of refractoriness under load with rising temperature

Lithuanian Standards Office , Annealing temperature 44 degrees

LST EN ISO 1893:2008 Refractory products - Determination of refractoriness under load - Differential method with rising temperature (ISO 1893:2007)

GM North America, Annealing temperature 44 degrees

GM GMN11192-2011 High Strength Recovery Annealed Cold Reduced Sheet Steel (Issue 4; Do Not Use on New Programs; No Replacement)

FI-SFS, Annealing temperature 44 degrees

SFS 3952-1976

Professional Standard - Aviation, Annealing temperature 44 degrees

HB 5220.44-2008 Methods for chemical analysis of superalloys. Part 44: Determination of arsenic content by distillation separation-molybdenum blue photometric method

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Annealing temperature 44 degrees

GJB 5384.8-2005 Test methods of performance for pyrotechnic composition Part 8: Determination of flame temperature Thermal radiation method
GJB 5384.7-2005 Test methods of performance for pyrotechnic composition Part 7: Determination of burning temperature Thermocouple method