Shear vibration test

Shear vibration test, Total:500 items.

In the international standard classification, Shear vibration test involves: Plastics, Vibration and shock with respect to human beings, Hand-held tools, Testing of metals, Wood-based panels, Earthworks. Excavations. Foundation construction. Underground works, Wood, sawlogs and sawn timber, Ceramics, Farming and forestry, Welding, brazing and soldering, Elements of buildings, Medical equipment, Mechanical testing, Adhesives, Fasteners, Rubber and plastics products, Products of the textile industry, Reinforced plastics, Products of non-ferrous metals, Powder metallurgy, Road vehicle systems, Measurement of force, weight and pressure, Refractories, Soil quality. Pedology, Geology. Meteorology. Hydrology, Construction materials, Waxes, bituminous materials and other petroleum products, Semi-manufactures of timber, Vibrations, shock and vibration measurements, Cellular materials, Paints and varnishes, TESTING, Raw materials for rubber and plastics, Mining equipment, Dentistry, Structure and structure elements, Iron and steel products, Road engineering, Packaging materials and accessories, Environmental testing, Electrical engineering in general, Electronic components in general, Road vehicles in general, Motor cycles and mopeds, Sports equipment and facilities, Equipment for the chemical industry, Gears.

Professional Standard - Aviation, Shear vibration test

HB 2545-1976 The maximum shear thickness of vibrating shear is 2mm
HB 6736-1993 Method of Shear Test for Sheet Metal
HB 5213-1982 High Temperature Shear Test Method for Metals
HB 5148-1980 Rivet, wire shear test method
HB 5148-1996 Rivet, wire shear test method
HB 5474-1991 Test Method for Shear Strength of Thermal Spray Coatings
HB 5164-1981 Test method for tensile shear strength of metal bonded joints
HB 5250-1993 Test method for shear strength of room temperature vulcanizing sealants
HB 5314-1993 Test method for static shear strength of anaerobic adhesives used in aviation
HB 7237-1995 In-plane shear test method for composite laminates

British Standards Institution (BSI), Shear vibration test

BS 2782-3 Method 323C:1996 Methods of testing plastics. Mechanical properties. Shear vibration. Non-resonance method
BS EN ISO 28927-7:2010 Hand-held portable power tools. Test methods for evaluation of vibration emission. Nibblers and shears
BS EN ISO 28927-7:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Nibblers and shears
BS ISO 6721-6:2019 Plastics. Determination of dynamic mechanical properties - Shear vibration. Non-resonance method
BS EN ISO 20337:2019 Fibre-reinforced plastic composites. Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
BS ISO 6721-8:2019 Plastics. Determination of dynamic mechanical properties - Longitudinal and shear vibration. Wave-propagation method
BS EN ISO 14323:2006 Resistance spot welding and projection welds - Destructive testing of welds - Specimen dimensions and procedure for impact shear test and cross-tension testing
BS ISO 5744:2004 Pliers and nippers - Methods of test
BS DD CEN/TS 15324:2008 Bitumen and bituminous binders - Determination of equiviscous temperature based on low shear viscosity using a dynamic shear rheometer in low frequency oscillation mode
BS ISO 5748:2004 Pliers and nippers - End cutting nippers - Dimensions and test values
BS EN ISO 14129:1998 Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength by the <+OR-> 45 ° tension test method
BS ISO 9656:2004 Pliers and nippers for electronics - Test methods
BS EN 392:1995(1999) Glued laminated timber — Shear test of glue lines
BS EN ISO 29022:2013 Dentistry. Adhesion. Notched-edge shear bond strength test
DD CEN/TS 15324:2008 Bitumen and bituminous binders. Determination of equiviscous temperature based on low shear viscosity using a dynamic shear rheometer in low frequency oscillation mode
BS EN ISO 9653:2000 Adhesives - Test method for shear strength of adhesive bonds
BS ISO 18437-3:2005+A1:2010 Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials. Cantilever shear beam method
BS 2782-3 Method 323E:1997 Methods of testing plastics - Mechanical properties - Longitudinal and shear vibration - Wave-propagation method
BS EN 12350-3:2000 Testing fresh concrete - Vebe test

CZ-CSN, Shear vibration test

CSN 42 0342-1985 Metal testing. Shear strength test
CSN 72 1031-1987 Laboratory triaxial shear test of soils
CSN 77 0867-1989 Self-adhesive packaging tapes. Test method for shear adhesion
CSN 05 1133-1987 Shear test of spot welded joints of bars for concrete reinforcement
CSN 35 6854-1987 Vibration. Vibration isolators. General requirements for tests
CSN 72 1026-1992 Laboratory determination of the Shear Strength of soils by vane test

American Society for Testing and Materials (ASTM), Shear vibration test

ASTM D2718-24 Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)
ASTM C1198-09 Standard Test Method for Dynamic Young''s Modulus, Shear Modulus, and Poisson''s Ratio for Advanced Ceramics by Sonic Resonance
ASTM C1198-09(2013) Standard Test Method for Dynamic Young''s Modulus, Shear Modulus, and Poisson''s Ratio for Advanced Ceramics by Sonic Resonance
ASTM D6128-00 Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Cell
ASTM D6128-97 Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Cell
ASTM D6128-22 Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Tester
ASTM D6128-06 Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Cell
ASTM C1198-01 Standard Test Method for Dynamic Young''s Modulus, Shear Modulus, and Poisson''s Ratio for Advanced Ceramics by Sonic Resonance
ASTM D6128-14 Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Cell
ASTM D2718-00(2011)e1 Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)
ASTM D2718-18 Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)
ASTM D7891-15 Standard Test Method for Shear Testing of Powders Using the Freeman Technology FT4 Powder Rheometer Shear Cell
ASTM D6128-16 Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Tester
ASTM E1875-00e1 Standard Test Method for Dynamic Young''s Modulus, Shear Modulus, and Poisson''s Ratio by Sonic Resonance
ASTM E1875-00 Standard Test Method for Dynamic Young''s Modulus, Shear Modulus, and Poisson''s Ratio by Sonic Resonance
ASTM E1875-08 Standard Test Method for Dynamic Young''s Modulus, Shear Modulus, and Poisson''s Ratio by Sonic Resonance
ASTM E1875-20a Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance
ASTM D7078/D7078M-05 Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
ASTM E1876-07 Standard Test Method for Dynamic Young''s Modulus, Shear Modulus, and Poisson''s Ratio by Impulse Excitation of Vibration
ASTM E1876-22 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration
ASTM D6773-02 Standard Shear Test Method for Bulk Solids Using the Schulze Ring Shear Tester
ASTM D6773-08 Standard Shear Test Method for Bulk Solids Using the Schulze Ring Shear Tester
ASTM E1876-21 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration
ASTM E1876-01 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration
ASTM E1876-00 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration
ASTM E1876-99 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration
ASTM B769-06 Standard Test Method for Shear Testing of Aluminum Alloys
ASTM D6682-01 Standard Test Method for Measuring the Shear Stresses of Powders Using the Peschl Rotational Split Level Shear Tester
ASTM D6682-01(2006) Standard Test Method for Measuring Shear Stresses of Powders Using Peschl Rotational Split Level Shear Tester
ASTM D6682-08 Standard Test Method for Measuring Shear Stresses of Powders Using Peschl Rotational Split Level Shear Tester
ASTM E1876-01(2006) Standard Test Method for Dynamic Young''s Modulus, Shear Modulus, and Poisson''s Ratio by Impulse Excitation of Vibration
ASTM E1876-09 Standard Test Method for Dynamic Young''s Modulus, Shear Modulus, and Poisson''s Ratio by Impulse Excitation of Vibration
ASTM E1876-15 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration
ASTM E1875-13 Standard Test Method for Dynamic Young''s Modulus, Shear Modulus, and Poisson''s Ratio by Sonic Resonance
ASTM C1548-02(2012) Standard Test Method for Dynamic Young''s Modulus, Shear Modulus, and Poisson''s Ratio of Refractory Materials by Impulse Excitation of Vibration
ASTM D6467-21e1 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Fine-Grained Soils
ASTM C1259-15 Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration
ASTM B769-94(2000) Standard Test Method for Shear Testing of Aluminum Alloys
ASTM B769-11(2021) Standard Test Method for Shear Testing of Aluminum Alloys
ASTM B769-11(2016) Standard Test Method for Shear Testing of Aluminum Alloys
ASTM B769-11 Standard Test Method for Shear Testing of Aluminum Alloys
ASTM C1259-98 Standard Test Method for Dynamic Young''s Modulus, Shear Modulus, and Poisson''s Ratio for Advanced Ceramics by Impulse Excitation of Vibration
ASTM C125-09 Standard Terminology Relating to Concrete and Concrete Aggregates
ASTM C125-09a Standard Terminology Relating to Concrete and Concrete Aggregates
ASTM C125-10 Standard Terminology Relating to Concrete and Concrete Aggregates
ASTM C1259-08e1 Standard Test Method for Dynamic Young''s Modulus, Shear Modulus, and Poisson''s Ratio for Advanced Ceramics by Impulse Excitation of Vibration
ASTM C1259-14 Standard Test Method for Dynamic Youngrsquo;s Modulus, Shear Modulus, and Poissonrsquo;s Ratio for Advanced Ceramics by Impulse Excitation of Vibration
ASTM C1259-01 Standard Test Method for Dynamic Young''s Modulus, Shear Modulus, and Poisson''s Ratio for Advanced Ceramics by Impulse Excitation of Vibration
ASTM D7552-22 Standard Test Method for Determining the Complex Shear Modulus (G*) of Asphalt Mixtures Using Dynamic Shear Rheometer
ASTM D2718-00(2011) Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)
ASTM F1269-89(2001) Test Methods for Destructive Shear Testing of Ball Bonds
ASTM F1269-89(1995)e1 Test Methods for Destructive Shear Testing of Ball Bonds
ASTM C1259-21 Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration
ASTM C1198-08 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Sonic Resonance
ASTM D2718-00(2006) Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)
ASTM D2718-00 Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)
ASTM D2718-00e1 Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)
ASTM D7078/D7078M-05 adjunct Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
ASTM D7078/D7078M-19 Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
ASTM D7078/D7078M-20 Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
ASTM D7078/D7078M-20e1 Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
ASTM D707-15 Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds (CAB)
ASTM D6467-13e1 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils
ASTM C1548-02(2020) Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio of Refractory Materials by Impulse Excitation of Vibration
ASTM C1259-08 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Impulse Excitation of Vibration
ASTM B831-05 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
ASTM B831-93(1998) Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
ASTM D2573-08 Standard Test Method for Field Vane Shear Test in Cohesive Soil
ASTM B831-19 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
ASTM B831-22 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
ASTM B831-14 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
ASTM B831-11 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
ASTM E1875-20 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance
ASTM D5618-94(2005) Standard Test Method for Measurement of Barnacle Adhesion Strength in Shear
ASTM D5618-94(2011) Standard Test Method for Measurement of Barnacle Adhesion Strength in Shear
ASTM F1269-06 Test Methods for Destructive Shear Testing of Ball Bonds
ASTM B769-07 Standard Test Method for Shear Testing of Aluminum Alloys
ASTM F1362-97(2003) Standard Test Method for Shear Strength and Shear Modulus of Aerospace Glazing Interlayer Materials
ASTM D7078/D7078M-12 Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
ASTM F1362-18 Standard Test Method for Shear Strength and Shear Modulus of Aerospace Glazing Interlayer Materials
ASTM F1362-18(2023) Standard Test Method for Shear Strength and Shear Modulus of Aerospace Glazing Interlayer Materials
ASTM C848-88(2016) Standard Test Method for Young’s Modulus, Shear Modulus, and Poisson’s Ratio For Ceramic Whitewares by Resonance
ASTM F1269-13 Standard Test Methods for Destructive Shear Testing of Ball Bonds
ASTM F1658-95 Test Method for Shear Testing of Calcium Phosphate Coatings (Withdrawn 2000)
ASTM D5169-98(2021) Standard Test Method for Shear Strength (Dynamic Method) of Hook and Loop Touch Fasteners
ASTM D7312-07 Standard Test Method for Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST)
ASTM D7312-10 Standard Test Method for Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST)
ASTM D3170-03 Standard Test Method for Chipping Resistance of Coatings
ASTM E143-01 Standard Test Method for Shear Modulus at Room Temperature
ASTM D2719-89(1994)e1 Standard Test Methods for Structural Panels in Shear Through-the-Thickness
ASTM E143-02 Standard Test Method for Shear Modulus at Room Temperature
ASTM E143-02(2008) Standard Test Method for Shear Modulus at Room Temperature
ASTM D3170-87(1996)e1 Standard Test Method for Chipping Resistance of Coatings
ASTM C1425-13 Standard Test Method for Interlaminar Shear Strength of 1–D and 2–D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures
ASTM D2719-13 Standard Test Methods for Structural Panels in Shear Through-the-Thickness
ASTM C1198-20 Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Sonic Resonance
ASTM D4255/D4255M-01(2007) Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
ASTM F3415-20 Standard Test Method for Triaxial Shear Strength and Cohesion of Equine Sports Surfaces
ASTM D3080-03 Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions
ASTM C1548-02 Standard Test Method for Dynamic Young''s Modulus, Shear Modulus, and Poisson''s Ratio of Refractory Materials by Impulse Excitation of Vibration
ASTM C1548-02(2007) Standard Test Method for Dynamic Young''s Modulus, Shear Modulus, and Poisson''s Ratio of Refractory Materials by Impulse Excitation of Vibration
ASTM C273/C273M-19 Standard Test Method for Shear Properties of Sandwich Core Materials
ASTM D3044-94 Standard Test Method for Shear Modulus of Wood-Based Structural Panels
ASTM D5618-94(2000) Standard Test Method for Measurement of Barnacle Adhesion Strength in Shear
ASTM D3654/D3654M-00e1 Standard Test Methods for Shear Adhesion of Pressure-Sensitive Tapes
ASTM C394-00 Standard Test Method for Shear Fatigue of Sandwich Core Materials
ASTM C273/C273M-07 Standard Test Method for Shear Properties of Sandwich Core Materials
ASTM C273/C273M-07a Standard Test Method for Shear Properties of Sandwich Core Materials
ASTM C273-00e1 Standard Test Method for Shear Properties of Sandwich Core Materials
ASTM C273/C273M-06 Standard Test Method for Shear Properties of Sandwich Core Materials
ASTM D3044-94(2000) Standard Test Method for Shear Modulus of Wood-Based Structural Panels
ASTM D3044-94(2011) Standard Test Method for Shear Modulus of Wood-Based Structural Panels
ASTM C273/C273M-18 Standard Test Method for Shear Properties of Sandwich Core Materials
ASTM C273/C273M-11 Standard Test Method for Shear Properties of Sandwich Core Materials
ASTM C273/C273M-20 Standard Test Method for Shear Properties of Sandwich Core Materials
ASTM C394/C394M-13 Standard Test Method for Shear Fatigue of Sandwich Core Materials
ASTM C273/C273M-16 Standard Test Method for Shear Properties of Sandwich Core Materials
ASTM C394/C394M-16 Standard Test Method for Shear Fatigue of Sandwich Core Materials
ASTM C394/C394M-16(2024) Standard Test Method for Shear Fatigue of Sandwich Core Materials
ASTM C848-88(1999) Standard Test Method for Young''s Modulus, Shear Modulus, and Poisson''s Ratio For Ceramic Whitewares by Resonance
ASTM C848-88(2020) Standard Test Method for Young’s Modulus, Shear Modulus, and Poisson’s Ratio For Ceramic Whitewares by Resonance
ASTM C848-88(2011) Standard Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio For Ceramic Whitewares by Resonance
ASTM D2573-01e1 Standard Test Method for Field Vane Shear Test in Cohesive Soil
ASTM D2573/D2573M-15e1 Standard Test Method for Field Vane Shear Test in Saturated Fine-Grained Soils
ASTM D2573/D2573M-18 Standard Test Method for Field Vane Shear Test in Saturated Fine-Grained Soils
ASTM D5169-98(2010) Standard Test Method for Shear Strength (Dynamic Method) of Hook and Loop Touch Fasteners
ASTM D4255/D4255M-01 Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
ASTM D4255/D4255M-83(1994)e1 Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
ASTM D4255/D4255M-20e1 Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
ASTM D8295-19 Standard Test Method for Determination of Shear Wave Velocity and Initial Shear Modulus in Soil Specimens using Bender Elements
ASTM D4255/D4255M-15 Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
ASTM D4255/D4255M-15a Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
ASTM D6467-99 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils
ASTM D6467-06 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils
ASTM D6467-06a Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils
ASTM D6467-21 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Fine-Grained Soils
ASTM D3044-94(2006) Standard Test Method for Shear Modulus of Wood-Based Structural Panels

Association Francaise de Normalisation, Shear vibration test

NF EN ISO 28927-7:2010 Portable motorized machines - Test methods for assessing vibration emission - Part 7: nibblers and shears
NF E90-321-7*NF EN ISO 28927-7:2010 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 7 : nibblers and shears
NF P94-071-1:1994 Soil investigation and testing. Direct shear test with shearbox apparatus. Part 1 : direct shear.
NF B51-012:1942 Wood. Shear test.
NF B51-012:2019 Timber - Shear Test
NF P20-521:1983 Doors. Shearing test.
NF E25-769*NF EN 28749:1992 Pins and grooved pins. Shear test.
NF T57-401*NF EN ISO 20337:2019 Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
NF EN ISO 20337:2019 Fiber Reinforced Plastic Composites - Shear Test Method Using Shear Frame for Determination of In-Plane Shear Stress/Shear Strain and Shear Modulus
NF P94-071-2:1994 Soils: recognition and tests - Rectilinear box shear test - Part 2: alternating shear
NF A89-572:2006 Resistance spot welding and projection welds - Destructive testing of welds - Specimen dimensions and procedure for impact shear test and cross tension testing.
NF E73-122*NF ISO 5744:2004 Pliers and nippers - Methods of test
NF B51-032:1981 Laminated bonded wood- Test of compression shear.
NF E73-104*NF ISO 5748:2004 Pliers and nippers - End cutting nippers - Dimensions and test values
NF E73-106*NF ISO 5747:2015 Pliers and nippers - Lever assisted side cutting pliers, end and diagonal cutting nippers - Dimensions and test values
NF T56-118:1980 Rigid cellular products with rubber or plastic base. Shearing test. Determination of apparent shearing coefficient.
NF E73-118*NF ISO 9656:2004 Pliers and nippers for electronics - Test methods
NF P21-372:1995 Glued laminated timber. Shear test of glue lines.
NF S91-266*NF EN ISO 29022:2013 Dentistry - Adhesion - Notched-edge shear bond strength test
NF E73-109:2004 Pliers and nippers - Slip joint pliers - Dimensions and test values.
NF E73-108:2004 Pliers and nippers - Multiple slip joint pliers - Dimensions and test values.
NF E73-102*NF ISO 5745:2004 Pliers and nippers - Pliers for gripping and manipulating - Dimension and test values
NF E73-105*NF ISO 5749:2004 Pliers and nippers - Diagonal cutting nippers - Dimensions and test values

Danish Standards Foundation, Shear vibration test

DS/EN ISO 28927-7:2010 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 7: Nibblers and shears
DS/ISO 6721-6/Amd. 1:2011 Plastics - Determination of dynamic mechanical properties - Part 6: Shear vibration - Non-resonance method
DS/ISO 6721-6:2011 Plastics - Determination of dynamic mechanical properties - Part 6: Shear vibration - Non-resonance method
DS/EN 28 749:1992 Pins and grooved pins - Shear test
DS/EN 28749:1992 Pins and grooved pins. Shear test
DS/ISO 8749:1988 Pins and grooved pins. Shear test
DS/CEN/TS 15324:2008 Bitumen and bituminous binders - Determination of equiviscous temperature based on Low Shear Viscosity using a Dynamic Shear Rheometer in low frequency oscillation mode
DS/EN 14869-2:2011 Structural adhesives - Determination of shear behaviour of structural bonds - Part 2: Thick adherends shear test
DS/ISO 6311:1981 Road vehicles. Brake linings. Internal shear strength of lining material. Test procedure

German Institute for Standardization, Shear vibration test

DIN EN ISO 28927-7:2010-05 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 7: Nibblers and shears (ISO 28927-7:2009); German version EN ISO 28927-7:2009
DIN 8526:2016 Testing of soldered joints - Gap soldered joints, shear test, creep shear test
DIN 8526:1977 Testing of Soldering Joints; Gap Soldered Joints, Shear Test, Creep Shear Test
DIN 53294:1982-02 Testing of sandwiches; Shear test
DIN ISO 5749:2006 Pliers and nippers - Diagonal cutting nippers - Dimensions and test values (ISO 5749:2004) English version of DIN ISO 5749:2006-09
DIN 53294:1982 Testing of sandwiches; Shear test
DIN ISO 5748:2006 Pliers and nippers - End cutting nippers - Dimensions and test values (ISO 5748:2004) English version of DIN ISO 5748:2006-09
DIN 18137-3:2002 Soil, investigation and testing - Determination of shear strength - Part 3: Direct shear test
DIN 50141:1982 Testing of metals; Shear test
DIN SPEC 4885:2014 Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus; Text in German and English
DIN ISO 5744:2006 Pliers and nippers - Methods of test (ISO 5744:2004) English version of DIN ISO 5744:2006-09
DIN CEN/TS 15324:2008 Bitumen and bituminous binders - Determination of equiviscous temperature based on Low Shear Viscosity using a Dynamic Shear Rheometer in low frequency oscillation mode; German version CEN/TS 15324:2008
DIN EN ISO 14323:2006 Resistance spot welding and projection welds - Destructive testing of welds - Specimen dimensions and procedure for impact shear test and cross-tension testing (ISO 14323:2006); English version of DIN EN ISO 14323:2006-07
DIN 50162:1978-09 Testing of clad steels; determination of shear strength between cladding metal and parent metal in shear test
DIN EN ISO 28927-7:2010 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 7: Nibblers and shears (ISO 28927-7:2009); German version EN ISO 28927-7:2009
DIN 53399-2:1982 Testing of reinforced plastics; shear test on plane specimens
DIN ISO 8976:2006 Pliers and nippers - Multiple slip joint pliers - Dimensions and test values (ISO 8976:2004) English version of DIN ISO 8976:2006-09
DIN ISO 9656:2006 Pliers and nippers for electronics - Test methods (ISO 9656:2004) English version of DIN ISO 9656:2006-09
DIN 50162:1978 Testing of clad steels; determination of shear strength between cladding metal and parent metal in shear test
DIN ISO/TS 17892-10:2005 Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests (ISO/TS 17892-10:2004); German version CEN ISO/TS 17892-10:2004

SCC, Shear vibration test

DANSK DS/EN ISO 28927-7:2010 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 7: Nibblers and shears
DANSK DS/ISO 6721-6:2011 Plastics – Determination of dynamic mechanical properties – Part 6: Shear vibration – Non-resonance method
NS-EN ISO 28927-7:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 7: Nibblers and shears (ISO 28927-7:2009)
BS ISO 20337:2018 Fibre-reinforced plastic composites. Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
AS 2205.8.2:1980 Methods of destructive testing of welds in metal, Part 8.2: Fillet shear tests - Transverse fillet shear test
AS 2205.8.1:1980 Methods of destructive testing of welds in metal, Part 8.1: Fillet shear tests - Longitudinal fillet shear test
BS 7054:1989 Method for shear testing of pins and grooved pins
BS 903-A14:1970 Methods of testing vulcanized rubber.-Determination of modulus in shear of rubber (bonded quadruple shear test piece)
DIN EN ISO 28927-7 E:2008 Draft Document - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 7: Nibblers and shears (ISO/DIS 28927-7:2008); German version prEN ISO 28927-7:2008
NS-EN 28749:1992 Pins and grooved pins — Shear test (ISO 8749:1986)
NS-ISO 8749:1986 Pins and grooved pins — Shear test (ISO 8749:1986)
BS 903-A28:1970 Methods of testing vulcanized rubber.-Determination of adhesion of vulcanized rubber to rigid plates in shear (quadruple shear test)
BS PD CEN/TS 12697-51:2017 Bituminous mixtures. Test methods-Surface shear strength test
NS-EN 392:1995 Glued laminated timber — Shear test of glue lines
AS 2205.8.1:1997 Methods for destructive testing of welds in metal - Longitudinal fillet shear test
DANSK DS/CEN/TS 15324:2008 Bitumen and bituminous binders – Determination of equiviscous temperature based on Low Shear Viscosity using a Dynamic Shear Rheometer in low frequency oscillation mode
SN-CEN/TS 15324:2008 Bitumen and bituminous binders — Determination of equiviscous temperature based on Low Shear Viscosity using a Dynamic Shear Rheometer in low frequency oscillation mode
BS ISO 18437-3:2005 Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials. Cantilever shear beam method
AASHTO T 320-2003 Standard Method of Test for Determining the Permanent Shear Strain and Stiffness of Asphalt Mixtures Using the Superpave Shear Tester (SST)
AASHTO T 320-2007(2020) Standard Method of Test for Determining the Permanent Shear Strain and Stiffness of Asphalt Mixtures Using the Superpave Shear Tester (SST)
DIN EN 15324 E:2005 Draft Document - Bitumen and bituminous binders - Determination of equiviscous temperature based on Low Shear Viscosity using a Dynamic Shear Rheometer in low frequency oscillation mode; German version prEN 15324:2005
AASHTO T 223-1996(2021) Standard Method of Test for Field Vane Shear Test in Cohesive Soil
BS EN 14770:2005 Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of complex shear modulus and phase angle. Dynamic Shear Rheometer (DSR)
ASTM D2573-01 Standard Test Method for Field Vane Shear Test in Cohesive Soil
BS ISO 6721-10:1999 Plastics. Determination of dynamic mechanical properties-Complex shear viscosity using a parallel-plate oscillatory rheometer

GM North America, Shear vibration test

GM GM9626P-1991 Pump Shear Test - ELPO

未注明发布机构, Shear vibration test

ANSI/ASAE S459-1992(2017) Shear and Three-Point Bending Test ofAnimal Bone
DIN 8526 E:2015-08 Testing of Soldering Joints; Gap Soldered Joints, Shear Test, Creep Shear Test
DIN 8526:1968 Testing of Soldering Joints; Gap Soldered Joints, Shear Test, Creep Shear Test
DIN 53294:1975 Testing of sandwiches; Shear test
DIN 18137-3 E:1997-10 Soil, investigation and testing - Determination of shear strength - Part 3: Direct shear test
DIN 18137-3 E:2002-09 Soil, investigation and testing - Determination of shear strength - Part 3: Direct shear test
ASTM RR-B07-1003 2011 B0769-Test Method for Shear Testing of Aluminum Alloys
ASTM RR-B07-2000 2022 B0831-Test Method for Shear Testing of Thin Aluminum Alloy Products
ASTM RR-E28-1032 2009 E1875-Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance
ASTM RR-E28-1031 2009 E1875-Test Method for Dynamic Youngs Modulus, Shear Modulus, and Poissons Ratio by Sonic Resonance
DIN EN 392:1996 Glued laminated timber — Shear test of glue lines
DIN EN ISO 29022 E:2012-04 Dental bonding incision edge shear bond strength test (draft)
ASTM RR-D14-1013 2008 D3931-Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading
DIN EN 14869-2:2004 Structural adhesives - Determination of shear behaviour of structural bonds - Part 2: Thick adherends shear test
ASTM RR-C28-1000 1996 C1259-Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration

International Organization for Standardization (ISO), Shear vibration test

ISO 28927-7:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 7: Nibblers and shears
ISO 8662-10:1998 Hand-held portable power tools - Measurement of vibrations at the handle - Part 10: Nibblers and shears
ISO 6721-6:2019 Plastics — Determination of dynamic mechanical properties — Part 6: Shear vibration — Non-resonance method
ISO 8749:1986 Pins and grooved pins; Shear test
ISO 20337:2018 Fibre-reinforced plastic composites — Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
ISO 6721-6:1996/Amd 1:2007 Plastics - Determination of dynamic mechanical properties - Part 6: Shear vibration - Non-resonance method; Amendment 1
ISO 14323:2006 Resistance spot welding and projection welds - Destructive testing of welds - Specimen dimensions and procedure for impact shear test and cross-tension testing
ISO 14323:2015 Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for impact tensile shear test and cross-tension testing of resistance spot and embossed projection welds
ISO 5744:2004 Pliers and nippers - Methods of test
ISO 5744:1988 Pliers and nippers - Methods of test
ISO 5748:2004 Pliers and nippers - End cutting nippers - Dimensions and test values
ISO 5748:1988 Pliers and nippers - End cutting nippers - Dimensions and test values
ISO 5747:1995 Pliers and nippers - Lever assisted side cutting pliers, end and diagonal cutting nippers - Dimensions and test values
ISO 9656:2004 Pliers and nippers for electronics - Test methods
ISO 9656:1989 Pliers and nippers for electronics - Test methods
ISO 29022:2013 Dentistry.Adhesion.Notched-edge shear bond strength test
ISO 6721-8:2019 Plastics — Determination of dynamic mechanical properties — Part 8: Longitudinal and shear vibration — Wave-propagation method
ISO 6311:1980 Road vehicles; Brake linings; Internal shear strength of lining material; Test procedure
ISO 6312:2001 Road vehicles - Brake linings - Shear test procedure for disc brake pad and drum brake shoe assemblies
ISO 8976:2004 Pliers and nippers - Multiple slip joint pliers - Dimensions and test values
ISO 9343:2004 Pliers and nippers - Slip joint pliers - Dimensions and test values

JSAE - Society of Automotive Engineers of Japan@ Inc., Shear vibration test

JASO M347-1995 Test method for shear stability of automatic transmission fluids

American National Standards Institute （ANSI), Shear vibration test

ANSI/ASAE S459-1993 Shear and Three-Point Bending Test of Animal Bones
ANSI/ASTM E1876:2001 Test Method for Dynamic Young's Modulus, Shear Modulus and Poisson's Ratio by Impulse Excitation of Vibration

Professional Standard - Chemical Industry, Shear vibration test

HGB 4033-1960 Ebony Shear Test
HG/T 3839-2006 Testing methods for shear strength of plastics by punch tool
HG/T 2379-2007 Test method of the adhesion shear strength of graphite adhesion agent
HG/T 2379-1992 Test method for bond shear strength of graphite adhesives

GSO, Shear vibration test

GSO ISO 28927-7:2015 Hand-held portable power tools -- Test methods for evaluation of vibration emission -- Part 7: Nibblers and shears
BH GSO ISO 8749:2016 Pins and grooved pins -- Shear test
OS GSO ISO 8749:2015 Pins and grooved pins -- Shear test
GSO ISO 6721-6:2013 Plastics - Determination of dynamic mechanical properties - Part 6: Shear vibration - Non-resonance method
GSO ISO 8749:2015 Pins and grooved pins -- Shear test
BH GSO ISO 28927-7:2017 Hand-held portable power tools -- Test methods for evaluation of vibration emission -- Part 7: Nibblers and shears
BH GSO ISO 6721-8:2016 Plastics - Determination of dynamic mechanical properties - Part 8: Longitudinal and shear vibration - Wave-propagation method
OS GSO ISO 6721-8:2013 Plastics - Determination of dynamic mechanical properties - Part 8: Longitudinal and shear vibration - Wave-propagation method
OS GSO ISO 6312:2007 Road vehicles - Brake linings - Shear test procedure for disc brake pad and drum brake shoe assemblies
GSO ISO 8905:2015 Sawn timber -- Test methods -- Determination of ultimate strength in shearing parallel to grain
GSO ISO 6721-8:2013 Plastics - Determination of dynamic mechanical properties - Part 8: Longitudinal and shear vibration - Wave-propagation method

RU-GOST R, Shear vibration test

GOST 16483.31-1974 Wood. Resonance method for determination of modulus of elasticity and shear and decrement vibrations
GOST R 57919-2017 Plastics. Determination of dynamic mechanical properties. Part 6. Shear vibration. Non-resonance method
GOST R 50076-1992 Pins and grooved pins. Shear test
GOST R ISO 28927-7-2012 Mechanical vibration. Evaluation of vibration emission of hand-held power tools. Part 7. Nibblers and shears
GOST 31557-2012 Shearers. General technical requirements. Test methods
GOST ISO 6312-2014 Brake linings. Shear test method for disc brake pad and drum brake shoe assemblies
GOST R 50578-1993 Polymer composites. Plate distortion shear test
GOST ISO 8579-2-2002 Vibration. Determination of mechanical vibrations of gear units during acceptance testing

Korean Agency for Technology and Standards (KATS), Shear vibration test

KS P 1002-2006 Cut and durability test methods for dressing scissors
KS P 1002-1980 Cut and durability test methods for dressing scissors
KS M ISO 6721-6-2016(2021) Plastics－Determination of dynamic mechanical properties－Part 6：Shear vibration－Non－resonance method
KS M ISO 6721-6:2022 Plastics — Determination of dynamic mechanical properties — Part 6: Shear vibration — Non-resonance method
KS F 2209-1994 Method of Shear Test for Wood
KS F 2209-2020 Method of shear test for wood
KS P 1002-2006(2016) Cut and durability test methods for dressing scissors
KS M 3978-2019 Magnetorheological elastomer — Determination of dynamic magnetorheological properties by shear vibration
KS B 0851-2006 Specimen dimensions and procedure for shear testingresistance spot and embossed projection welded joints
KS M 3019-2008 Testing methods for shear strength of plastics by punch tool
KS B 0562-2016 Methods of double shear test for fastner
KS M 3019-1982 Testing methods for shear strength of plastics by punch tool
KS B 0562-2021 Methods of double shear test for fastner
KS P 1002-2021 Cut and durability test methods for dressing scissors
KS B ISO 14323:2007 Resistance spot welding and projection welds-Destructive testing of welds-Specimen dimensions and procedure for impact sheaar test and cross-tension testing
KS B ISO 14323:2014 Resistance spot welding and projection welds－Destructive testing of welds－Specimen dimensions and procedure for impact sheaar test and cross－tension testing
KS F 2154-2022 Method of shear(racking) resistance test for light-frame wood shear walls
KS B 0842-2016 Method of shear test for we1ded side fillet joint
KS B 0561-2016 Methods of single shear test for fastener
KS B 0842-1985 Method of shear test for we1ded side fillet joint
KS B ISO 5747:2002 Pliers and nippers－Lever assisted side cutting pliers, end and diagonal cutting nippers－Dimensions and test values
KS B ISO 8976:2002 Pliers and nippers-Multiple slip joint pliers-Dimensions and test values
KS M 3721-2008 Testing methods for strength properties of adhesives in shear by compression loading
KS M 3729-2011 Testing methods for impact shear strength of adhesive bonds
KS P 1001-2006(2016) Cut and durability test methods for surgical knives
KS B 0842-2021 Method of shear test for welded side fillet joint
KS M 3721-1987 Testing methods for strength properties of adhesives in shear by compression loading
KS P 1001-1981 Cut and durability test methods for surgical knives
KS M 3385-2020 Testing method for transverse shear strength of glass fiber reinforced plastics
KS B ISO 5187-2021 Methods of tension and shear tests for brazed joint
KS M ISO 6721-8-2008(2018) Plastics－Determination of dynamic mechanical properties－Part 8：Longitudinal and shear vibration－Wave-propagation method
KS M ISO 6721-8-2023 Plastics－Determination of dynamic mechanical properties－Part 8：Longitudinal and shear vibration－Wave-propagation method
KS R 1104-2013 Shear strength test procedure for drum brake shoe assemblies and pads of automobiles
KS P ISO 7741:2008 Instruments for surgery－Scissors and shears－General requirements and test methods
KS B ISO 5187-2016(2021) Methods of tension and shear tests for brazed joint
KS F 2342-2022 Test method for field vane shear in cohesive soil
KS F 2342-2016 Standard test method for field vane shear in cohesive soil
KS B 0875-1995 TENSION AND SHEAR TEST SPECIMENS OF BRAZED JOINT
KS R 1097-2001 Road vehicles－Brake linings－Internal shear strength of lining material－ Test procedure
KS F 2343-2022 Test method for direct shear test of soils under consolidated drained conditions
KS R ISO 6312-2014(2019) Road vehicles — Brake linings — Shear test procedure for disc brake pad and drum brake shoe assemblies
KS R ISO 6312-2019 Road vehicles — Brake linings — Shear test procedure for disc brake pad and drum brake shoe assemblies
KS M ISO 14129-2016(2021) Fibre-reinforced plastic composites－Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the ±45° tension test method
KS M ISO 14129-2021 Fibre-reinforced plastic composites－Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the ±45° tension test method
KS R ISO 6311-2017(2022) Road vehicles－Brake linings－Internal shear strength of lining material－ Test procedure
KS R ISO 6311-2022 Road vehicles－Brake linings－Internal shear strength of lining material－ Test procedure

SE-SIS, Shear vibration test

SIS SS 02 71 27-1991 Geotechnical tests — Shear strength — Direct simple shear test, CU- and CD-tests — Cohesive soil
SIS SS 02 71 25-1991 Geotechnical tests — Shear strength — Fall-cone test — Cohesive soil

KR-KS, Shear vibration test

KS M ISO 6721-6-2022 Plastics — Determination of dynamic mechanical properties — Part 6: Shear vibration — Non-resonance method
KS M ISO 6721-6-2016 Plastics－Determination of dynamic mechanical properties－Part 6：Shear vibration－Non－resonance method
KS M ISO 6721-8-2008(2023) Plastics－Determination of dynamic mechanical properties－Part 8：Longitudinal and shear vibration－Wave-propagation method
KS B ISO 5187-2016 Methods of tension and shear tests for brazed joint
KS M ISO 14129-2016 Fibre-reinforced plastic composites－Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the ±45° tension test method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Shear vibration test

GB/T 33061.6-2023 Determination of dynamic mechanical properties of plastics - Part 6: Non-resonant shear vibration method
GB/T 4934.2-2008 Instrument for soil test.Shear apparatus.Part 2: Field vane shear apparatus
GB/T 6291-1999 Pliers and nippers--Methods of test
GB/T 6291-2013 Pliers and nippers.Methods of test
GB/T 26739-2011 Test method for internal shear strength of road vehicle brake lining materials
GB/T 32377-2015 Dynamic punch-shear properties test method for fibre reinforced composites
GB/T 6328-1999 Adhesives--Test method for shear impact strength of adhesive bonds
GB/T 15598-1995 Testing methods for shear strength of plastics by punch tool
GB/T 15111-1994 Test method for shear tensile fatigue of spot welded joints
GB/T 3355-2005 Test method for longitudinal transverse shear(L-T shear)properties of fiber reinforced plastics
GB/T 10007-2008 Rigid cellular plastics.Determination of shear strength
GB/T 28889-2012 Test method for in-plane shear properties of composite materials
GB/T 4934.1-2008 Instrument for soil test.Shear apparatus.Part 1: Strain-controlled direct shear apparatus
GB/T 6400-2007 Metallic materiaks-Shear test method for wires and rivets
GB/T 1455-2005 Test method for shear properties of sandwich constructions or cores

CEN - European Committee for Standardization, Shear vibration test

EN ISO 8662-10:1998 Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 10: Nibblers and Shears
EN 14869-2:2004 Structural adhesives - Determination of shear behaviour of structural bonds - Part 2: Thick adherends shear test

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Shear vibration test

GB/T 33332-2016 Test method for dynamic shear strength of adhesive tapes
GB/T 34487-2017 Shear testing method of aluminium alloy products for structural members

CH-SNV, Shear vibration test

VSM 14031-1944 plastic. Material testing. Shear test (shear)

PL-PKN, Shear vibration test

PN M69782-1974 Shearing strength test of spot weld
PN B04482-1989 Apparatus lor laboratory shear strcngith tcsting of soils willi de lined shear surlaee General technical requirenents
PN M69790-1967 Statie tensile and shearing testings of brased joints
PN E08413-1993 Safety of hand-held motor-operated electric tools. Routers and trimmers. Particular requirements and tests

European Committee for Standardization (CEN), Shear vibration test

EN ISO 20337:2019 Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus (ISO 20337:2018)
EN ISO 28927-7:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 7: Nibblers and shears (ISO 28927-7:2009)
EN 28749:1992 Pins and grooved pins - Shear test (ISO 8749:1986)
EN 326-1:1994 Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results
EN ISO 14323:2006 Resistance spot welding and projection welds - Destructive testing of welds - Specimen dimensions and procedure for impact shear test and cross-tension testing ISO 14323:2006
EN ISO 29022:2013 Dentistry - Adhesion - Notched-edge shear bond strength test
EN 14869-2:2011 Structural adhesives - Determination of shear behaviour of structural bonds - Part 2: Thick adherends shear test
prEN 17643-2021 Bitumen and bituminous binders - Determination of equi-shear modulus temperature using a Dynamic Shear Rheometer (DSR) - BTSV test

Professional Standard - Water Conservancy, Shear vibration test

SL 237-021-1999 Code for test of soil - direct shear test
SL 237-044-1999 Code for test of soil - vane shear test
SL 237-022-1999 Code for test of soil - repeated drained direct shear test
SL 237-059-1999 Code for test of soil - coarse grained soil direct shear test

Professional Standard - Ferrous Metallurgy, Shear vibration test

YBJ 19-1990 Cross plate shear test procedure

GOSTR, Shear vibration test

GOST 30873.10-2006 Hand-held portable power tools. Measurement of vibrations at the handlе. Part 10. Nibblers and shears
GOST R 57968-2017 Polymer composites. Test method of samples for shearing
GOST 28988-1991 Fluid power systems. Vibration characteristics, vibration tests
GOST R 57947-2017 Composites. Determination of dynamic Young's modulus, shear modulus and Poisson's ratio by impulse excitation of vibration method
GOST R 57862-2017 Composites. Determination of dynamic young's modulus, shear modulus and poisson's ratio by sonic resonance

国家市场监督管理总局、中国国家标准化管理委员会, Shear vibration test

GB/T 26548.7-2020 Hand-held portable power tools—Test methods for evaluation of vibration emission—Part 7:Nibbler and shears
GB/T 41498-2022 Fibre-reinforced plastic composites—Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
GB/T 6328-2021 Test method for shear impact strength of adhesive bonds
GB/T 40388-2021 Test method for shear strength of C/C composites
GB/T 1455-2022 Test method for shear properties of sandwich constructions or cores

ES-AENOR, Shear vibration test

UNE 16-529-1990 Pliers and clamps. Connecting pliers for side cutting, front cutting and diagonal cutting. Measurement and testing
UNE 16-530-1990 Pliers and clamps. Front cutting pliers. Measurement and testing

JP-JASO, Shear vibration test

JASO M347-2007 Automatic transmission fluids-Test method for shear stability

VDI - Verein Deutscher Ingenieure, Shear vibration test

VDI 2125-2014 Planar mechanisms - Transfer of a slider motion into a rocker motion with regard to optimum transmission angle

Japanese Industrial Standards Committee (JISC), Shear vibration test

JIS D 4415:1996 Test procedure of shear strength for brake linings and pads of automobiles
JIS Z 2288:2003 Methods of tensile shear test and bend test for thin clad steel sheets
JIS D 4415:1998 Automotive parts -- Brake linings and disc brake pads -- Test procedure of shear strength
JIS C 0056:2001 Environmental testing -- Part 2: Test methods Test Fe: Vibration -- Sine-beat method
JIS K 7079-2:2012 Carbon fiber reinforced plastics -- Testing methods for in-plane shear properties -- Part 2: Double V-notch shear method

AT-ON, Shear vibration test

ONORM EN 28749-1993 Pins and grooved pins -Shear test
OENORM EN 17643-2021 Bitumen and bituminous binders - Determination of equi-shear modulus temperature using a Dynamic Shear Rheometer (DSR) - BTSV test

Indonesia Standards, Shear vibration test

SNI 2824-2011 Cara uji geser langsung batu

(U.S.) Ford Automotive Standards, Shear vibration test

FORD FLTM BU 002-1-2000 SHEAR ADHESION TEST OF ADHESIVES
FORD FLTM BV 003-04-2000 VIBRATION DAMPENING TEST

IN-BIS, Shear vibration test

IS 11229-1985 Specification for shear boxes for soil testing
IS 2720 Pt.39/Sec.2-1979 Soil Test Methods Part XXXX Direct Shear Tests on Gravel-Containing Soils Section 2: In Situ Shear Tests
IS 2720 Pt.13-1972 Soil Test Methods Part XIII Direct Shear Test
IS 2720 Pt.30-1980 Soil Test Methods Part XXX Laboratory Leaf Shear Test
IS 4434-1978 Soil in situ leaf shear test operating procedures

Group Standards of the People's Republic of China, Shear vibration test

T/CSEB 0003-2018 Testing method for determining dynamic shear strength of rock materials by the punch shear specimen
T/SZBX 148-2023 Electrodynamic vibration testing systems
T/CAOE 52-2023 Triaxial shear test method for hydrate-containing sediments

Society of Automotive Engineers (SAE), Shear vibration test

SAE J2257-2002 Brake Lining Shear Testing-See J840
SAE J577-1973 VIBRATION TEST MACHINE
SAE J577-1964 VIBRATION TEST MACHINE

BE-NBN, Shear vibration test

NBN-EN 28749-1992 Pins and grooved pins - Shear test

Professional Standard - Non-ferrous Metal, Shear vibration test

YS 5220-2000 Specification for electrical vane shear test
YS/T 5220-2019 Electric test cross plate shear test procedure
YS 5220-2000(条文说明) Electric test cross plate shear test procedure

Lithuanian Standards Office , Shear vibration test

LST EN 28749-2001 Pins and grooved pins - Shear test (ISO 8749:1986)
LST EN 392-2000 Glued laminated timber - Shear test of glue lines
LST EN ISO 28927-7:2010 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 7: Nibblers and shears (ISO 28927-7:2009)

AENOR, Shear vibration test

UNE-EN 28749:1993 PINS AND GROOVED PINS. SHEAR TEST. (ISO 8749:1986).
UNE-EN ISO 28927-7:2010 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 7: Nibblers and shears (ISO 28927-7:2009)

Standard Association of Australia （SAA）, Shear vibration test

AS/NZS 4056.12:1992 Pliers and nippers - Slip joint pliers - Dimensions and test values
AS/NZS 4056.7:1992 Pliers and nippers - End cutting nippers - Dimensions and test values
AS/NZS 4056.6:1992 Pliers and nippers - Lever assisted side cutting pliers, end and diagonal cutting nippers - Dimensions and test values
AS/NZS 4056.9:1992 Pliers and nippers - Multiple slip joint pliers - Dimensions and test values
AS 1289.6.2.2:2020 Methods of testing soils for engineering purposes, Method 6.2.2: Soil strength and consolidation tests — Determination of shear strength of a soil — Direct shear test using a shear box
AS 1330:2004 Metallic materials - Drop weight tear test for ferritic steels

Underwriters Laboratories (UL), Shear vibration test

UL 1296-1992 Shear resistance tests for ceiling boards for manufactured homes
UL 1296-2007 Shear resistance tests for ceiling boards for manufactured homes

AIA/NAS - Aerospace Industries Association of America Inc., Shear vibration test

NASM1312-21-1997 Fastener Test Methods; Method 21 Shear Joint Fatigue Constant Amplitude
NASM1312-13-1997 Fastener Test Methods; Method 13 Double Shear Test
NAM1312-113-1997 Fastener Test Methods@ Metric; Method 113 Double Shear Test
NASM1312-21-2004 Fastener Test Methods Method 21 Shear Joint Fatigue Constant Amplitude (Rev 1)
NASM1312-21-2012 FASTENER TEST METHODS METHOD 21 SHEAR JOINT FATIGUE@ CONSTANT AMPLITUDE (Rev 2)

Aerospace Industries Association/ANSI Aerospace Standards, Shear vibration test

AIA/NAS NASM1312-21-2012 FASTENER TEST METHODS METHOD 21 SHEAR JOINT FATIGUE, CONSTANT AMPLITUDE

Professional Standard - Forestry, Shear vibration test

LY/T 3297-2022 Dynamic Testing Technology of Wood Shear Modulus

ZA-SANS, Shear vibration test

SANS 6044:2006 Shear strength in compression of wood adhesive bonds - Block shear test

The American Road & Transportation Builders Association, Shear vibration test

AASHTO T 320-2007(R2020) Standard Method of Test for Determining the Permanent Shear Strain and Stiffness of Asphalt Mixtures Using the Superpave Shear Tester (SST)
AASHTO TP 70-2007 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO T 223-96(R2017) Standard Method of Test for Field Vane Shear Test in Cohesive Soil

AASHTO - American Association of State Highway and Transportation Officials, Shear vibration test

T 223-1996 Standard Method of Test for Field Vane Shear Test in Cohesive Soil
T 320-2003 Standard Method of Test for Determining the Permanent Shear Strain and Stiffness of Asphalt Mixtures using the Superpave Shear Tester (SST)
T 320-2007 Standard Method of Test for Determining the Permanent Shear Strain and Stiffness of Asphalt Mixtures Using the Superpave Shear Tester (SST)

SAE - SAE International, Shear vibration test

SAE J577-2015 VIBRATION TEST MACHINE
SAE J577-1958 VIBRATION TEST MACHINE
SAE J577-2005 Vibration Test Machine and Operation Procedure

Aerospace Industries Association, Shear vibration test

AIA NASM1312-21-1997 Fastener Test Methods; Method 21 Shear Joint Fatigue Constant Amplitude FSC 53GP

Professional Standard - Civil Aviation, Shear vibration test

MH/T 6099-2013 Standard test method for lap shear strength of sealants

Professional Standard - Aerospace, Shear vibration test

QJ 1634A-1996 Test method for compressive shear strength of adhesives
QJ 2101-1991 Test method for shear properties of rigid foamed plastics

Military Standard of the People's Republic of China-General Armament Department, Shear vibration test

GJB 715.19-1990 Fastener test methods lap joint shear
GJB 1709-1993 Test method for low temperature tensile shear strength of adhesives

RO-ASRO, Shear vibration test

STAS 12310/2-1985 MECHANICAL TESTINGS OF ADHESIVED BONDED JOINTS Shear testing
STAS 11392-1980 Tests of roll welding joints TENSILE AND SHEARING TEST
STAS 10897/2-1983 Tests of metals MECANICAL TESTING OF SOLDERED AND BRAZED JOINTS Sheartesting

HU-MSZT, Shear vibration test

MSZ 1543-1980 Technical requirements and inspection of manual scissors for cutting blades
MSZ KGST 2413-1980 Industrial requirements and testing of electric manual sectioning shears

TR-TSE, Shear vibration test

TS 1855-1975 RIGID CELLULAR PLASTICS - DETERMINATION OF SHEAR STRENGTH

Professional Standard - Textile, Shear vibration test

FZ/T 01113-2012 Test method of fabric shear property at low levels of deformation

GM Daewoo, Shear vibration test

GMKOREA EDS-T-7926-2011 Test Method for Shear Stability of Petroleum Products

Taiwan Provincial Standard of the People's Republic of China, Shear vibration test

CNS 12548-1989 Method of Shear Test for Side Fillet Welded Joint
CNS 9657-1982 Testing of Vibrating Rollers for Its Vibrating & Driving Operations

GOST, Shear vibration test

GOST 23741-1979 Soils. In-situ methods of shearing test mine openings
GOST 21719-1980 Soils. In-situ methods of shearing test in boreholes and in massiv

National Metrological Verification Regulations of the People's Republic of China, Shear vibration test

JJG 948-2018 Electrodynamic Vibration Testing Systems
JJG 1000-2005 Electrodynamic Horizontal Vibration Generator for Testing

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Shear vibration test

PREN 4525-1998 Aerospace Series Aluminium and Aluminium Alloys Test Methods Shear Testing (Edition P1)

Professional Standard - Building Materials, Shear vibration test

JC/T 472-1992 Test method for shear strength of automobile disc brake pad assembly and drum brake shoe assembly

YU-JUS, Shear vibration test

JUS B.F8.103-1990 Road vehicles. Brake linings. Interval chear stength of lining material. Test procedure

Professional Standard - Automobile, Shear vibration test

QC/T 227.2-2009 Test methods of the adhesive bonding shearing strength of brake lining for motorcycles and mopeds
QC/T 227.2-1997 Test method for bonded shear strength of motorcycle and moped brake pads

Professional Standard - Machinery, Shear vibration test

JB/T 4042-2008 Test methods of vibrating screens
JB/T 4042-1999 Test methods of vibrating screens

工业和信息化部, Shear vibration test

JB/T 4042-2018 Vibrating screen test method

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Shear vibration test

GJB 5872-2006 Test method for laminar shearing strength of stretched acrylic plastic