ZH
RU
ES
Bending Material Toughness
Bending Material Toughness, Total:498 items.
In the international standard classification, Bending Material Toughness involves: Paper and board, Wood-based panels, Testing of metals, Cellular materials, Plastics, Reinforced plastics, Conducting materials, Welding, brazing and soldering, Glass, Wood, sawlogs and sawn timber, Measurement of force, weight and pressure, Construction materials, Insulating materials, Pipeline components and pipelines, Mechanical testing, Footwear, Materials for the reinforcement of composites, Paints and varnishes, Waxes, bituminous materials and other petroleum products, Ceramics, Linear and angular measurements, Surface treatment and coating, Sacks. Bags, Packaging materials and accessories, Acoustics and acoustic measurements, Textile fibres, Paint coating processes, Products of non-ferrous metals, Rubber and plastics products, Inorganic chemicals, Products of the chemical industry, Raw materials for rubber and plastics, Photography, Piezoelectric and dielectric devices, Cutting tools, Refractories, Non-textile floor coverings.
CZ-CSN, Bending Material Toughness
American Society for Testing and Materials (ASTM), Bending Material Toughness
- ASTM E190-92(2003) Standard Test Method for Guided Bend Test for Ductility of Welds
- ASTM E190-92(2008) Standard Test Method for Guided Bend Test for Ductility of Welds
- ASTM E190-14 Standard Test Method for Guided Bend Test for Ductility of Welds
- ASTM D6272-02(2008)e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
- ASTM D6272-17 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
- ASTM D6272-17e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
- ASTM D6272-02 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
- ASTM D6272-00 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
- ASTM D5801-95(2006) Standard Test Method for Toughness and Tenacity of Bituminous Materials
- ASTM D5801-17 Standard Test Method for Toughness and Tenacity of Asphalt Materials
- ASTM E290-97a(2004) Standard Test Methods for Bend Testing of Material for Ductility
- ASTM C674-13(2018) Standard Test Methods for Flexural Properties of Ceramic Whiteware Materials
- ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
- ASTM F392-93(1999) Standard Test Method for Flex Durability of Flexible Barrier Materials
- ASTM F392/F392M-21 Standard Practice for Conditioning Flexible Barrier Materials for Flex Durability
- ASTM D7264/D7264M-07 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
- ASTM D5801-12 Standard Test Method for Toughness and Tenacity of Bituminous Materials
- ASTM E290-97a Standard Test Method for Bend Testing of Material for Ductility
- ASTM D7264/D7264M-06 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
- ASTM E290-09 Standard Test Methods for Bend Testing of Material for Ductility
- ASTM D7264/D7264M-21 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
- ASTM E290-13 Standard Test Methods for Bend Testing of Material for Ductility
- ASTM D7264/D7264M-15 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
- ASTM B820-98 Standard Test Method for Bend Test for Formability of Copper Alloy Spring Material
- ASTM B593-96(2003) Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
- ASTM D610-85(1989)e1 Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces
- ASTM D6109-97e1 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber
- ASTM B593-96(2014)e1 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
- ASTM C1352-96(2008) Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
- ASTM C1352/C1352M-21 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
- ASTM C1352/C1352M-15 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
- ASTM C203-99 Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
- ASTM C203-05a Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
- ASTM C203-05 Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
- ASTM C203-22 Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
- ASTM C203-05a(2012) Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
- ASTM C203-05a(2017) Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
- ASTM D790-15e1 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
- ASTM D790-00 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
- ASTM D790-02 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
- ASTM C674-13(2023) Standard Test Methods for Flexural Properties of Ceramic Whiteware Materials
- ASTM D790-17 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
- ASTM D7774-22 Standard Test Method for Flexural Fatigue Properties of Plastics
- ASTM D7774-17 Standard Test Method for Flexural Fatigue Properties of Plastics
- ASTM D5023-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
- ASTM C1550-03a Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
- ASTM C1550-08 Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
- ASTM C1550-10 Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
- ASTM C1550-03 Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
- ASTM C1550-12 Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
- ASTM C1550-05 Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
- ASTM C1550-19 Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
- ASTM C1550-02 Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
- ASTM C1550-20 Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
- ASTM C1550-12a Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
- ASTM D790-15 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
- ASTM D790-15e2 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
Korean Agency for Technology and Standards (KATS), Bending Material Toughness
International Organization for Standardization (ISO), Bending Material Toughness
- ISO 5629:1983 Paper and board; Determination of bending stiffness; Resonance method
- ISO 5629:2017 Paper and board - Determination of bending stiffness - Resonance method
- ISO 7438:2005 Metallic materials - Bend test
- ISO 7438:2016 Metallic materials - Bend test
- ISO 7438:1985 Metallic materials; Bend test
- ISO 7438:2020 Metallic materials — Bend test
- ISO 7801:1984 Metallic materials; Wire; Reverse bend test
- ISO/CD 7801 Metallic materials — Wire — Reverse bend test
- ISO/DIS 7801:2023 Metallic materials — Wire — Reverse bend test
- ISO 178:1972 Title missing - Legacy paper document
- ISO 178:2010 Plastics - Determination of flexural properties
- ISO 178:2001 Plastics - Determination of flexural properties
- ISO 178:1993 Plastics; determination of flexural properties
- ISO 8491:1998 Metallic materials - Tube (in full section) - Bend test
- ISO 8491:1986 Metallic materials; Tube (in full section); Bend test
- ISO/TS 28660:2022 Plastics — Determination of J-R curves — Fracture toughness
- ISO 14125:1998/Amd 1:2011 Fibre-reinforced plastic composites - Determination of flexural properties; Amendment 1
- ISO 1209-1:2004 Rigid cellular plastics - Determination of flexural properties - Part 1: Basic bending test
- ISO 21914:2019 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
- ISO 1209-2:2004 Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
- ISO 1143:2010 Metallic materials - Rotating bar bending fatigue testing
- ISO 1143:2021 Metallic materials - Rotating bar bending fatigue testing
- ISO 1209-1:2007 Rigid cellular plastics - Determination of flexural properties - Part 1: Basic bending test
- ISO 5173:2009/Amd 1:2011 Destructive tests on welds in metallic materials - Bend tests; Amendment 1
- ISO 14125:1998/cor 1:2001 Fibre-reinforced plastic composites - Determination of flexural properties; Technical Corrigendum 1
- ISO 178:2010/Amd 1:2013 Plastics - Determination of flexural properties; Amendment 1
- ISO 1209-2:2007 Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
- ISO 5173:2009 Destructive tests on welds in metallic materials - Bend tests
- ISO 22407:2021 Metallic materials — Fatigue testing — Axial plane bending method
- ISO 5173:2023 Destructive tests on welds in metallic materials — Bend tests
- ISO 18910:2000 Imaging materials - Photographic film and paper - Determination of curl
- ISO/TR 4137:1978 Plastics; Determination of modulus of elasticity by alternating flexure
- ISO 10619-1:2017 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness- Part 1:Bending tests at ambient temperature
- ISO 10619-1:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature
- ISO 10619-2:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures
- ISO 10619-2:2017 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures
- ISO 10619-2:2021 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures
- ISO 10619-3:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures
- ISO 7799:1985 Metallic materials; Sheet and strip 3 mm thick or less; Reverse bend test
RU-GOST R, Bending Material Toughness
- GOST 9626-1990 Laminated glued wood. Method for determination of impact viscosity in bending
- GOST R ISO 7438-2013 Mettallic materials. Bend test
- GOST 16483.4-1973 Wood. Methods for determination of impact bending strength
- GOST R 57866-2017 Polymer composites. Determination of flexural properties
- GOST R 56805-2015 Polymer composites. Methods for determination of flexural properties
- GOST 6943.9-1979 Glass textile products. Method of dinamic bending resistance determination
- GOST 6806-1973 Paint and lacquer materials. Method for determination of film elasticity in bending
- GOST 16483.9-1973 Wood. Methods for determination of modulus of elasticity in static bending
- GOST 21523.7-1987 Modified wood. Method for determination of modulus of elasticity in static bending
- GOST R 57843-2017 Wood polymer composites. Test methods for determination of flexural mechanical properties
- GOST R 58022-2017 Polymer composite crossarms. Method for determination of flexural mechanical properties
- GOST 9779-1977 Binding material with film coating. Method for determination of stability to multiple bending
- GOST R 50028-1992 Rubber or plastics hoses and tubing. Bending test
- GOST 18564-1973 Rigid cellular plastics. Static bend test
- GOST R 57749-2017 Ceramic composites. Test method of flexural strength at normal temperature
- GOST R 56798-2015 Polymer composites. Method for determination the mechanical characteristics of sandwich constructions flexural
- GOST R 52740-2007 Paint materials. Method for determination of film strength while bending around cylindrical mandrel
TR-TSE, Bending Material Toughness
- TS 1005-1971 PLASTICS DETERMINATION OF THE IZOD IMPACT RESISTANCE OF RIGID PLASTICS (IZOD IMPACT FLEXURAL TESTS)
- TS 205-1977 BEND TESTING OF METALLIC MATERIALS
- TS 1004-1971 PLASTICS DETERMINATlON OF THE CHARPY IMPACT RESISTANCE OF RIGID PLASTICS (CHARPY IMPACT FLEXURAL TEST)
- TS 985-1971 PLASTICS DETERMINATION OF FLEXURAL PROPERTIES OF RIGID PLASTICS
American National Standards Institute （ANSI), Bending Material Toughness
IPC - Association Connecting Electronics Industries, Bending Material Toughness
PT-IPQ, Bending Material Toughness
Association Francaise de Normalisation, Bending Material Toughness
- NF T51-120-3:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - - Partie 3 : essai en flexion trois points sur éprouvettes non encastrées.
- NF T51-120-4:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - Partie 4 : essai en flexion quatre points sur éprouvettes non encastrées.
- NF A03-158:2005 Metallic materials - Bend test.
- NF A03-158:2016 Metallic materials - Bend test
- NF A03-158*NF EN ISO 7438:2020 Metallic materials - Bend test
- NF P75-218:1997 Thermal insulating products for building applications. Determination of bending behaviour.
- NF T51-120-5:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - - Partie 5 : essai en flexion à moment constant.
- NF T51-120-6:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - - Partie 6 : essai de flexion par flambement.
- NF EN ISO 14125:1998 Composites plastiques renforcés de fibres - Détermination des propriétés de flexion
- NF A03-010:1986 Metallic materials. Wire. Reverse bend test.
- NF T51-001:2011 Plastics - Determination of flexural properties.
- NF T51-001:1997 Plastics. Determination of flexural properties.
- NF G62-010:1982 FOOTWEAR. DETERMINATION OF THE RESISTANCE TO REPEATED FLEXING OF FOREGOING MATERIALS.
- NF A89-203:1996 Destructive tests on welds in metallic materials. Bend tests.
- NF T51-120-2:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - Partie 2 : essai en flexion sur éprouvettes encastrées.
- NF A03-091*NF EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test
- NF A03-091:1994 Metallic materials. Tube (in full section). Bend test.
- NF T47-203-1*NF EN ISO 10619-1:2018 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1 : bending tests at ambient temperature
- NF EN ISO 5173:2023 Essais destructifs des soudures sur matériaux métalliques - Essais de pliage
- NF T51-001*NF EN ISO 178:2019 Plastics - Determination of flexural properties
- NF T57-105/A1*NF EN ISO 14125/A1:2011 Fibre-reinforced plastic composites - Determination of flexural properties - Amendment 1.
- NF EN ISO 14125/A1:2011 Composites plastiques renforcés de fibres - Détermination des propriétés de flexion - Amendement 1
- NF P18-413:1981 Concretes. Individual properties of hydraulic machines for bending tests of hard materials.
- NF A89-203/A1*NF EN ISO 5173/A1:2012 Destructive tests on welds in metallic materials - Bend tests.
- NF B51-154*NF EN 13879:2002 Wood-based panels - Determination of edgewise bending properties
- NF T37-001-7:2014 Coil coated metals - Test methods - Part 7 : resistance to cracking on bending (T-bend test)
- NF T37-001-7*NF EN 13523-7:2021 Coil coated metals - Test methods - Part 7 : resistance to cracking on bending (T-bend test)
- NF A89-203*NF EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests.
- NF T51-001/A1:2013 Plastics - Determination of flexural properties - Amendment 1
- NF T51-120-1:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - - Partie 1 : principes généraux.
- NF EN ISO 18756:2005 Céramiques techniques - Détermination de la ténacité à la rupture des céramiques monolithiques à température ambiante par fissuration superficielle en flexion
- NF T47-203-1:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1 : bending tests at ambient temperature.
- NF T47-203-3*NF EN ISO 10619-3:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3 : bending tests at high and low temperatures.
- NF T47-203-2*NF EN ISO 10619-2:2021 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2 : bending tests at sub-ambient temperatures
- NF T47-203-2:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2 : bending tests at sub-ambient temperatures.
- NF A03-159*NF EN ISO 7799:2000 Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test.
- NF T56-102:1976 Elastomer or plastics based cellular products. Bending test on rigid cellular materials.
- NF P18-411:1981 Concretes. Common characteristics of hydraulic machines for compression, bending, and tension testing of hard materials.
工业和信息化部, Bending Material Toughness
国家市场监督管理总局、中国国家标准化管理委员会, Bending Material Toughness
ESDU - Engineering Sciences Data Unit, Bending Material Toughness
- ESDU 81041-1981 Flexibilities of and stresses in thin unpressurised pipe bends with flanged ends under in-plane bending: influence of bend angle.
- ESDU 74043-1974 Flexibilities of and stresses in unrestrained pressurised thin pipe bends subjected to in-plane bending.
European Committee for Standardization (CEN), Bending Material Toughness
- EN ISO 178:1996 Plastics - Determination of Flexural Properties ISO 178: 1993
- EN ISO 178:2019 Plastics - Determination of flexural properties (ISO 178:2019)
- EN ISO 178:2010 Plastics - Determination of flexural properties (ISO 178:2010)
- EN ISO 7438:2000 Metallic Materials - Bend Test ISO 7438: 1985
- EN ISO 7438:2020 Metallic materials - Bend test (ISO 7438:2020)
- EN ISO 7438:2005 Metallic materials Bend test
- EN 10232:1993 Metallic Materials - Tube (in Full Section) - Bend Test
- EN ISO 7438:2016 Metallic materials - Bend test
- EN 13879:2002 Wood-based panels - Determination of edgewise bending properties
- EN ISO 178:2010/A1:2013 Plastics - Determination of flexural properties (ISO 178:2010/Amd 1:2013)
- prEN ISO 5173:2021 Destructive tests on welds in metallic materials - Bend tests (ISO/DIS 5173:2021)
- EN 910:1996 Destructive Tests on Welds in Metallic Materials - Bend Tests
- EN ISO 10619-3:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011)
- EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test
- EN ISO 10619-2:2021 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2021)
- EN ISO 10619-1:2018 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2017)
- EN ISO 10619-1:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2011)
- EN ISO 10619-2:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2011)
VN-TCVN, Bending Material Toughness
TH-TISI, Bending Material Toughness
- TIS 2173-2012 Metallic materials.bend test
- TIS 2175-2004 Reverse bend test for metallic wire [iso title: metallic materials.wire.reverse bend test]
British Standards Institution (BSI), Bending Material Toughness
- BS EN ISO 7438:2016 Metallic materials. Bend test
- BS EN ISO 7438:2005 Metallic materials - Bend test
- BS EN ISO 7438:2020 Metallic materials. Bend test
- BS EN ISO 10619-1:2018 Tracked Changes. Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Bending tests at ambient temperature
- PD ISO/TS 28660:2022 Plastics. Determination of J-R curves. Fracture toughness
- BS EN ISO 14125:1998+A1:2011 Fibre-reinforced plastic composites. Determination of flexural properties
- BS EN ISO 178:2003 Plastics - Determination of flexural properties
- BS EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test
- BS EN ISO 5173:2023 Destructive tests on welds in metallic materials. Bend tests
- BS EN ISO 178:2010+A1:2013 Plastics. Determination of flexural properties
- BS EN ISO 10619-2:2021 Tracked Changes. Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Bending tests at sub-ambient temperatures
- 18/30369869 DC BS EN ISO 7438. Metallic materials. Bend test
- BS EN 13523-7:2014 Coil coated metals. Test methods. Resistance to cracking on bending (T-bend test)
- BS EN 13523-7:2001 Coil coated metals - Test methods - Resistance to cracking on bending (T-bend test)
- BS PD CEN/TS 15963:2014 Bitumen and bituminous binders. Determination of the fracture toughness temperature by a three point bending test on a notched specimen
- BS DD CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
- BS ISO 1143:2010 Metallic materials. Rotating bar bending fatigue testing
- BS ISO 22407:2021 Metallic materials. Fatigue testing. Axial plane bending method
- BS EN 13879:2002 Wood-based panels - Determination of edgewise bending properties
- 21/30426853 DC BS EN ISO 5173. Destructive tests on welds in metallic materials. Bend tests
- BS EN ISO 7799:2000 Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test
- 20/30375727 DC BS EN ISO 10619-2. Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Part 2. Bending tests at sub-ambient temperatures
- 18/30356322 DC BS ISO 21914. Test methods for fibre-reinforced cementitious composites. Bending moment-curvature curve by four-point bending test
- BS EN 13523-7:2021 Tracked Changes. Coil coated metals. Test methods. Resistance to cracking on bending (T-bend test)
- BS EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests
- BS EN ISO 5173:2010+A1:2011 Destructive tests on welds in metallic materials. Bend tests
- BS EN ISO 178:2019 Tracked Changes. Plastics. Determination of flexural properties
- BS EN 910:1996 Destructive tests on welds in metallic materials - Bend tests
- 18/30366891 DC BS ISO 1143. Metallic materials. Rotating bar bending fatigue testing
- 20/30404146 DC BS ISO 1143. Metallic materials. Rotating bar bending fatigue testing
- BS ISO 1143:2021 Tracked Changes. Metallic materials. Rotating bar bending fatigue testing
- BS 4370-4:1991 Methods of test for rigid cellular materials - Method 14 - Determination of flexural properties
- BS EN 12384:1999 Copper and copper alloys - Determination of spring bending limit on strip
- BS EN 12384:1999(2000) Copper and copper alloys - Determination of spring bending limit on strip
- 20/30425653 DC BS EN 13523-7. Coil coated metals. Test methods. Part 7. Resistance to cracking on bending (T-bend test)
- BS ISO 24213:2017 Tracked Changes. Metallic materials. Sheet and strip. Method for springback evaluation in stretch bending
ZA-SANS, Bending Material Toughness
German Institute for Standardization, Bending Material Toughness
- DIN EN ISO 7438:2005 Metallic materials - Bend test (ISO 7438:2005); English version of DIN EN ISO 7438
- DIN EN ISO 7438:2012 Metallic materials - Bend test (ISO 7438:2005); German version EN ISO 7438:2005
- DIN EN ISO 7438:2021-03 Metallic materials - Bend test (ISO 7438:2020); German version EN ISO 7438:2020
- DIN EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993
- DIN EN ISO 14125:2011-05 Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998 + Cor.1:2001 + Amd.1:2011); German version EN ISO 14125:1998 + AC:2002 + A1:2011
- DIN EN ISO 178:2019-08 Plastics - Determination of flexural properties (ISO 178:2019); German version EN ISO 178:2019
- DIN EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998); German version EN ISO 8491:2004
- DIN EN ISO 8491:2004-10 Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998); German version EN ISO 8491:2004
- DIN ISO 7801:2008-10 Metallic Materials - Wire - Reverse bend test (ISO 7801:1984)
- DIN ISO 7801:2008 Metallic Materials - Wire - Reverse bend test (ISO 7801:1984); English version of DIN ISO 7801:2008-10
- DIN EN ISO 5173:2023-05 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2023); German version EN ISO 5173:2023
- DIN 50113:2018 Testing of metallic materials - Rotating bar bending fatigue test
- DIN 50142:2019-09 Testing of metallic materials - Flat bending fatigue test
- DIN EN ISO 178:2019 Plastics - Determination of flexural properties (ISO 178:2019)
- DIN 50113:1982 Testing of metals; Rotating bar bending fatigue test
- DIN EN ISO 5173:2021 Destructive tests on welds in metallic materials - Bend tests (ISO/DIS 5173:2021); German and English version prEN ISO 5173:2021
- DIN 51944:1999 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
- DIN EN ISO 10619-2:2018 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2017)
- DIN EN 13523-7:2022-01 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test); German version EN 13523-7:2021
- DIN EN 13523-7:2020 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test); German and English version prEN 13523-7:2020
- DIN 50142:1982 Testing of metallic materials; Flat bending fatigue test
- DIN 50113:2018-12 Testing of metallic materials - Rotating bar bending fatigue test
- DIN 51211:1978 Testing of Metallic Materials; Reverse Bend Test of Wires
- DIN 51902:2020 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
- DIN 51944:2020 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
- DIN 51944:2020-12 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
- DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
- DIN 51030:1954 Testing of ceramic raw materials and materials; determination of the dry bending strength
- DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters
- DIN EN ISO 5173:2012 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009 + Amd 1:2011); German version EN ISO 5173:2010 + A1:2011
- DIN EN ISO 7799:2000 Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test (ISO 7799:1985); German version EN ISO 7799:2000
CH-SNV, Bending Material Toughness
KR-KS, Bending Material Toughness
Danish Standards Foundation, Bending Material Toughness
IT-UNI, Bending Material Toughness
Japanese Industrial Standards Committee (JISC), Bending Material Toughness
ES-UNE, Bending Material Toughness
Group Standards of the People's Republic of China, Bending Material Toughness
- T/CSEB 0006-2018 Testing method for determining dynamic fracture toughness of rock materials by the Notched Semi-circular Bending specimen
- T/CSEB 0005-2018 Testing method for determining dynamic fracture toughness of rock materials by the Chevron Notched Semi-circular Bending specimen
- T/CSEB 0002-2018 Testing method for determining dynamic bending strength of rock materials by the Semi-circular Bending specimen
- T/CSRA 12-2021 Test method for flexural properties of aramid fiber Ⅲ reinforced materials
- T/GAMA 19-2021 Additive manufacturing—Test method for shape memory properties of polymer materials—Bending testing
- T/CSTM 00485-2022 Test method for flexural properties of fiber reinforced polymer matrix composite laminates
- T/GZZJ 07-2020 Determination of bending properties of polylactic acid filaments for 3D printing
HU-MSZT, Bending Material Toughness
Professional Standard - Ferrous Metallurgy, Bending Material Toughness
- YB/T 5349-2014 Metallic materials.Determination of bending mechanical porperties
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Bending Material Toughness
- GB/T 232-1999 Metallic materials--Bend test
- GB/T 232-2010 Metallic materials.Bend test
- GB/T 9341-2008 Plastic.Determination of flexural properties
- GB/T 238-2002 Metallic materials-Wire-Reverse bend test
- GB/T 238-2013 Metallic materials.Wire.Reverse bend test
- GB/T 9341-2000 Plastics--Determination of flexural properties
- GB/T 8812.2-2007 Rigid cellular plastics.Determination of flexural properties.Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
- GB/T 4741-1999 Standard test method for bending strength of ceramic materials
- GB/T 8805-1988 Determination of deflection for rigid plastic pipes
- GB/T 32976-2016 Test method for transverse bending of tubes of metallic materials
- GB/T 16406-1996 Acoustics--Flexural resonance testing method for damping properties of acoustical materials
- GB/T 8812.1-2007 Rigid cellular plastics.Determination of flexural properties.Part 1:Basic bending test
- GB/T 4337-2008 Metallic materials.Fatigue testing.Rotating bar bending method
- GB/T 4337-2015 Metallic materials.Fatigue testing.Rotating bar bending method
- GB/T 16419-1996 Plastics--Determination of flexural properties by use of small specimens
- GB/T 11387-2008 Test methods for the properties of piezoelectric ceramics.Test for the static flexural strength
- GB/T 29895-2013 Standard test methods for nondestructive evaluation of wood-based flexural members using transverse vibration
- GB/T 11387-1989 Testing methods for static flexural strength of piezoelectric ceramics
- GB/T 3356-2014 Test method for flexural properties of orientational fiber reinforced polymer metrix composite materials
- GB/T 1449-2005 Fibre-reinforced plastic composites-Determination of flexural properties
- GB/T 235-2013 Metallic materials.Sheet and strip.Reverse bend test
SE-SIS, Bending Material Toughness
Taiwan Provincial Standard of the People's Republic of China, Bending Material Toughness
Institute of Interconnecting and Packaging Electronic Circuits (IPC), Bending Material Toughness
GOSTR, Bending Material Toughness
- GOST R 56680-2015 Polymer composites. Determination facing’s mechanical flexural properties of sandwich construction by long beam flexure method
BE-NBN, Bending Material Toughness
AENOR, Bending Material Toughness
- UNE 59532:1994 FOOTWEAR MATERIALS. SOLING. DETERMINATION OF FLEXING RESISTANCE ON TEST PIECES.
- UNE-EN ISO 14125:1999 FIBRE-REINFORCED PLASTICS COMPOSITES. DETERMINATION OF FLEXURAL PROPERTIES (ISO 14125:1998)
- UNE-ISO 1209-2:2011 Rigid cellular plastics. Determination of flexural properties. Part 2: Determination on flexural strength and apparent flexural modulus of elasticity
- UNE 7469:1999 METALLIC MATERIALS. WIRE. REVERSE BEND TEST.
- UNE-EN ISO 8491:2006 Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998)
- UNE-EN ISO 5173:2011 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009)
- UNE-ISO 1209-1:2011 Rigid cellular plastics. Determination of flexural properties. Part 1: Basic bending test
- UNE-EN ISO 178:2011 Plastics - Determination of flexural properties (ISO 178:2010)
- UNE-EN ISO 178:2011/A1:2013 Plastics - Determination of flexural properties (ISO 178:2010/Amd 1:2013)
- UNE-EN ISO 14125:1999/A1:2011 Fibre-reinforced plastic composites - Determination of flexural properties - Amendment 1 (ISO 14125:1998/Amd 1:2011)
RO-ASRO, Bending Material Toughness
- STAS IS0 8491-1992 Metallic materials. Tube (in full section). Bend test
- STAS SR ISO 7801:1993 Metallic materials. Wire. Reverse bend test
- STAS 5874-1983 PLASTICS Determination of flexural propertie? of rigid plastics
- STAS 12921-1990 Rigid plastics materials. Crack resistance under strain into a given medium. Curved specimen method
- STAS 10537-1976 CARBON MATERIALS Determination of (he strength to compression, bending and traction
- STAS 5162/5-1973 CABLES WITH THERMOPLASTIC MATERIAL, ELASTOMERE AND NATURAL RUBBER INSULATION AND SHEA'IH. Melhods o{ bending test
AT-ON, Bending Material Toughness
Lithuanian Standards Office , Bending Material Toughness
- LST EN ISO 7438:2005 Metallic materials - Bend test (ISO 7438:2005)
- LST EN ISO 7438:2020 Metallic materials - Bend test (ISO 7438:2020)
- LST EN ISO 14125+AC:2002 Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998)
- LST EN ISO 10619-1:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2011)
- LST EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998)
- LST EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009)
- LST EN ISO 10619-3:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011)
- LST EN ISO 178:2011 Plastics - Determination of flexural properties (ISO 178:2010)
- LST EN ISO 10619-2:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2011)
- LST EN ISO 10619-2:2021 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2021)
- LST EN ISO 14125+AC:2002/A1:2011 Fibre-reinforced plastic composites - Determination of flexural properties - Amendment 1 (ISO 14125:1998/Amd.1:2011)
PL-PKN, Bending Material Toughness
Standard Association of Australia （SAA）, Bending Material Toughness
Association of German Mechanical Engineers, Bending Material Toughness
YU-JUS, Bending Material Toughness
- JUS G.S2.630-1991 Plastics. Determination of stiffness in torsion of flexible materials. General method
- JUS D.C8.108-1983 Testing ofparticle boards. Determination modu/us ofelasticity in bending
Indonesia Standards, Bending Material Toughness
Professional Standard - Agriculture, Bending Material Toughness
- GB/T 238-1984 Test method for repeated bending of metallic materials
Professional Standard - Building Materials, Bending Material Toughness
FI-SFS, Bending Material Toughness
API - American Petroleum Institute, Bending Material Toughness
Professional Standard - Aerospace, Bending Material Toughness
- QJ 2099-1991 Test method for flexural properties of three-dimensional fiber reinforced composite materials
(U.S.) Ford Automotive Standards, Bending Material Toughness
BR-ABNT, Bending Material Toughness
Professional Standard - Light Industry, Bending Material Toughness
- QB/T 2803-2006 Method for measuring bending degree of rigid plastic pipes
ES-AENOR, Bending Material Toughness
Professional Standard - Textile, Bending Material Toughness
- FZ/T 60042-2014 3D braided polymer matrix composites.Test method for bending properties
- FZ/T 60042-2013 Test method for flexural properties of resin-based three-dimensional braided composites
IN-BIS, Bending Material Toughness
未注明发布机构, Bending Material Toughness
工业和信息化部/国家能源局, Bending Material Toughness
- JB/T 13227-2017 In-situ bending-torsion composite mechanical properties testing system for solid materials
- JB/T 13223-2017 In-situ tensile-bending composite mechanical property testing system for solid materials
- JB/T 13224-2017 In-situ tensile-bending-torsion composite mechanical property testing system for solid materials
Professional Standard - Chemical Industry, Bending Material Toughness
- HG/T 3840-2006 Plastics. Determination of flexural properties by use of small specimens
(U.S.) Parachute Industry Association, Bending Material Toughness
Professional Standard - Aviation, Bending Material Toughness
- HB 7617-1998 Test method for flexural properties of fiber reinforced metal matrix composite laminates
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Bending Material Toughness
- GB/T 33621-2017 Test method for bending properties of 3D braided fabric and its polymer matrix composites
- GB/T 33099-2016 Test methods of stiffness for dipped reinforcing material—Three-point bending
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Bending Material Toughness
- PREN 2746-1990 Aerospace Series Glass Fibre Reinforced Plastics Determination of Flexural Properties Three Point Bend Method (Issue P 1)
NL-NEN, Bending Material Toughness
- NEN 7104-1983 Pipes of amorphous thermoplastics materials - Determination of the creep behaviour of the pipes by flexion in the circumferential direction
Society of Automotive Engineers (SAE), Bending Material Toughness
- SAE ARP1704-1981 SHORT-BAR FRACTURE TOUGHNESS OF METALLIC MATERIALS Determination of
- SAE ARP1704A-1981 Short-Bar Fracture Toughness of Metallic Materials, Determination Of
SAE - SAE International, Bending Material Toughness
- SAE ARP1704A-1993 SHORT-BAR FRACTURE TOUGHNESS OF METALLIC MATERIALS@ DETERMINATION OF
Professional Standard - Machinery, Bending Material Toughness
- JB/T 6544-1993 Drawing and bending elastic modulus of plastics - Test method
CEN - European Committee for Standardization, Bending Material Toughness
- EN ISO 10619-2:2018 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at subambient temperatures
GM North America, Bending Material Toughness
- GM GM9195P-1988 Extensibility and Warp of Vacuum Forming Material (Vacuum Forming DOT Test)