ZH
RU
ES

composite tough material

composite tough material, Total:498 items.

In the international standard classification, composite tough material involves: Test conditions and procedures in general, Reinforced plastics, Road vehicles in general, Aircraft and space vehicles in general, Wood-based panels, Semi-manufactures of timber, Plastics, Rubber and plastics products, Waxes, bituminous materials and other petroleum products, Medical equipment, Insulating materials, Construction materials, Inorganic chemicals, Materials for aerospace construction, Refractories, Protection against fire, Wastes, Paper and board, Education, Packaging machinery, Non-textile floor coverings, Ground service and maintenance equipment, Conducting materials, Products of the textile industry, Testing of metals, Cutting tools, Vocabularies, Power transmission and distribution networks, Springs, Sacks. Bags, Paints and varnishes, Dentistry, Products of non-ferrous metals, Installations in buildings, Furniture, Soil quality. Pedology, Raw materials for rubber and plastics, Resistors, Iron and steel products, Kitchen equipment, Pipeline components and pipelines, Adhesives, Road engineering, Electricity. Magnetism. Electrical and magnetic measurements, Organic chemicals, Laboratory medicine, Cellular materials, Analytical chemistry, Construction industry, Non-ferrous metals, Horology, Protection of and in buildings, Fluid storage devices, Ceramics, Production in the chemical industry, Elements of buildings, Mechanical testing, Seals, glands, Chipless working equipment.

RU-GOST R, composite tough material

GOST R 56808-2015 Polymer composites. Method for determination interlaminar fracture toughness of unidirectional-reinforced composites
GOST R 56740-2015 Polymer composites. Method for determination of translaminar fracture toughness characteristic of polymer composite laminates and pultruded polymer composites
GOST R 57994-2017 Polymer composites. Test methods for fracture toughness definition and energy release speeds
GOST 32588-2013 Polymer composites. List of properties
GOST R 50583-1993 Polymer composites. List of properties
GOST R 57946-2017 Polymer composites. Calculating of materials thermal endurance from thermogravimetric decomposition data
GOST R 56656-2015 Metal composites. Method for determination of tensile properties of fiber reinforced metal matrix composites
GOST R 57845-2017 Polymer composites. Calculation of normative values for structural materials
GOST 33742-2016 Polymer composites. Classification
GOST R 50579-1993 Polymer composites. Classification
GOST R 57791-2017 Polymer composites pultruded profiles. Appearance
GOST R 56793-2015 Polymer composites. Method for determination of fatigue delamination of unidirectional reinforced composites
GOST R 56800-2015 Polymer composites. Determination of tensile properties of unreinforced and reinforced materials
GOST R 57866-2017 Polymer composites. Determination of flexural properties
GOST R 54072-2010 Space technology. Polimer composites. List of properlies
GOST R 52903-2007 Packs made of polymeric films and composite materials. General specifications
GOST R 56806-2015 Polymer composites. Identification of polymer composites in electronic databases
PNST 36-2015 Nanomodified thermoplastical carbon composite. Specifications
GOST R 56760-2015 Polymer composites. Identification of fibers, fillers and core materials in computerized materials property databases
GOST 33846-2016 Polymer composites. Methods for determination of resins, fibers and voids in carbon composite
GOST R 57206-2016 Polymer composites. Test method of determination of the mode II fracture toughness for the calibrated end-loaded split (C-ELS)
GOST 33685-2015 Polymer composites. Test method for determination of the interlaminar fracture toughness under shear GIIC
GOST 32654-2014 Polymer composites. Thermosetting prepregs and premixes. Determination of cure characteristics
GOST R 56651-2015 Polymer composites. Method for determination of shear properties of sandwich core materials
GOST R 56816-2015 Polymer composites. Determination of flatwise compressive properties of sandwich cores
GOST 33344-2015 Constructive pultruded profiles from polymer composites. General specifications
GOST 33118-2014 Combined materials on basis of aluminium foil. Specifications
GOST R 56796-2015 Polymer composites. Prepregs. Method for determination of constituent content of prepreg
GOST R 56805-2015 Polymer composites. Methods for determination of flexural properties
GOST R 57941-2017 Polymer composites. Infrared spectroscopy. Qualitative analysis
GOST R 57041-2016 Polymer composites. Method of determination of the characteristics of flexural curved beams
GOST R 57865-2017 Polymer composites. Normalization of physical-mechanical properties depending on of reinforcing filler
GOST R 56789-2015 Polymer composites. Prepreg. Method for determination of volatiles content in prepreg
GOST R 56652-2015 Polymer composites. Methods for determination of water absorption of core materials for sandwich constructions
GOST R 57843-2017 Wood polymer composites. Test methods for determination of flexural mechanical properties
GOST 32794-2014 Polymer composites. Terms and definitions
GOST R 57049-2016 Polymer composites. Test method for shear fatigue of sandwich core materials
GOST R 56660-2015 Polymer composites. Method for determination of depth of dye penetration in a composite rod
GOST R 56763-2015 Polymer composites. Method for determination of tensile strength of sandwich core materials
GOST R 56787-2015 Polymer composites. Nondestructive testing
GOST R 56924-2016 Dentistry. Polymer-based restorative materials
GOST R 57743-2017 Ceramic composites. Determination of thermal expansion

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, composite tough material

GB/T 28891-2012 Fibre-reinforced plastic composites.Determination of mode I interlaminar fracture toughness G<下标IC> for unidirectionally reinforced materials
GB/T 26652-2011(英文版) Abrasion resistant composite materials castings
GB/T 26652-2011 Abrasion-resistant composite materials castings
GB/T 32502-2016 Composite Material Core Aerial Conductors
GB/T 35096-2018 SiC particulate reinforced aluminum matrix composites.Forgings
GB/T 28889-2012 Test method for in-plane shear properties of composite materials
GB/T 2038-1991 Metallic materials--Standard test method for JIC,a measure of ductile fracture toughness
GB/T 43116-2023 Fiber-reinforced plastic composites include composites standard certification schemes for reduced and extended certifications
GB/T 29552-2013 Fibre reinforced plastics composites bridge decks
GB/T 27792-2011 Classification for laminated composite gasket materials
GB/T 42920-2023 Evaluation of fire-resistant characteristics and fire performance of plastic fiber reinforced plastic composites
GB/T 8808-1988 Test method for peel force of flexible laminated plastics
GB 8808-1988 Peel Test Method for Soft Composite Plastic Materials
GB/T 31539-2015(英文版) Pultruded fibre reinforced polymer composites structural profiles
GB/T 31539-2015 Pultruded fiber reinforced polymer composites structural profiles

British Standards Institution (BSI), composite tough material

BS ISO 15024:2023 Fibre-reinforced plastic composites. Determination of mode I interlaminar fracture toughness, GIC, for unidirectionally reinforced materials
BS ISO 15024:2002 Fibre-reinforced plastic composites. Determination of mode I interlaminar fracture toughness, $iGic, for unidirectionally reinforced materials
BS DD CEN/TS 15534-2:2007 Wood-plastics composites (WPC) - Characterisation of WPC materials
BS EN 15534-1:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Test methods for characterisation of compounds and products
BS EN 15534-6:2015 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Specifications for fencing profiles and elements
BS EN 15534-1:2014+A1:2017 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Specifications for cladding profiles and tiles
BS EN 15534-4:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Specifications for decking profiles and tiles
BS EN 15534-5:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Specifications for cladding profiles and tiles
BS EN 60626-3:2008+A1:2012 Combined flexible materials for electrical insulation - Specifications for individual materials
BS EN 15534-6:2015+A1:2017 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Specifications for fencing profiles and elements
BS EN 16245-5:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics. Specific requirements for core materials
BS EN 16245-1:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics. General requirements
BS ISO 12856-1:2022 Railway applications. Polymeric composite sleepers, bearers and transoms - Material characteristics
19/30384123 DC BS EN 15534-5. Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5. Specifications for cladding profiles and tiles
BS ISO 15034:2000 Composites. Prepregs. Determination of resin flow
BS EN 16245-4:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics. Specific requirements for fabrics
BS EN ISO 14125:1998 Fibre-reinforced plastic composites - Determination of flexural properties
BS DD CEN/TS 15534-1:2007 Wood-plastics composites (WPC) - Test methods for characterisation of WPC materials and products
BS EN 16245-3:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics. Specific requirements for fibre
PD ISO/TR 13086-5:2022 Gas cylinders. Information for design of composite cylinders. Impact testing of composite cylinders
BS 6729:1987 Method for determination of the dynamic fracture toughness of metallic materials
BS EN ISO 14125:1998+A1:2011 Fibre-reinforced plastic composites. Determination of flexural properties
BS EN 13706-1:2002 Reinforced plastics composites - Specifications for pultruded profiles - Designation
DD CEN/TS 15534-2:2007 Wood-plastics composites (WPC) — Part 2: Characterisation of WPC materials
DD CEN/TS 15534-1:2007 Wood-plastics composites (WPC) — Part 1: Test methods for characterisation of WPC materials and products
BS 3958-6:1972 Thermal insulating materials - Finishing materials; hard setting composition, self-setting cement and gypsum plaster
BS EN 60626-2:2009 Combined flexible materials for electrical insulation. Methods of test
BS EN 60626-2:2011 Combined flexible materials for electrical insulation. Methods of test
PD ISO/TR 22293:2021 Evaluation of methods for assessing the release of nanomaterials from commercial, nanomaterial-containing polymer composites
BS EN ISO 12737:2005 Metallic materials - Determination of plane-strain fracture toughness
BS EN ISO 12737:2011 Metallic materials. Determination of plane-strain fracture toughness
BS EN ISO 12737:2006 Metallic materials. Determination of plane-strain fracture toughness
BS EN ISO 12737:2010 Metallic materials. Determination of plane-strain fracture toughness
BS PD ISO/TR 22293:2021 Evaluation of methods for assessing the release of nanomaterials from commercial, nanomaterial-containing polymer composites
BS DD CEN/TS 15534-3:2007 Wood-plastics composites (WPC) - Characterisation of WPC products
PD ISO/TR 4673:2022 Gas cylinders. Service life performance of composite cylinders and tubes
PD CEN/CLC/TR 17603-31-05:2021 Space Engineering. Thermal design handbook. Structural Materials: Metallic and Composite

Group Standards of the People's Republic of China, composite tough material

T/CSAE 170-2020 Test methods for mechanical properties of adhesively bonded joints for automotive polymer matrix composites—Composite/composite
T/CSAE 171-2020 Test methodsfor mechanical properties of adhesively bonded joints for automotive polymer matrix composites—Composite/metal
T/CPCIF 0047-2020 Fe-Al based steelmaking composites with chrome slag （FA Composites）
T/GDC 90-2021 High performance fiber reinforced inorganic composite mixtures
T/CEC 108-2016 Distribution network composite pole
T/QGCML 1440-2023 Automotive composite leaf springs
T/QGCML 1068-2023 Automotive Continuous Composite Materials
T/ZZB 1468-2019 Copper and copper alloy strip for compound contacts
T/CSTM 00339-2021 Materials for underwater glass fiber composite sleeve system
T/CIA 002-2022 Composite Cable Trench Covers
T/ZZB 0872-2018 Bio-material composite cutting board
T/DASI 018-2021 Building wall flexible inorganic sheet composite decoration system materials
T/SDVDA 001-2021 Packaging materials for veterinary medicine Plastic and aluminum foil composite film and composite bag
T/CECS 10035-2019 Assessment standard for green building materials - metal composite decorative materials
T/CECS 692-2020 Composite pultrusion profile structure technical specification
T/CSCM 01-2021 Fiber winding composite pole
T/SZZX 005-2019 Carbon fiber composites watch cases
T/CPCIF 0167-2021 Microporous thermal insulating ceramic composite material
T/ZZB 1982-2020 Autoclave for curing composite materials
T/GZZX 3-2018 Composite material street code technical specification
T/CSTM 00652-2021 Dispersion strengthened copper matrix composite
T/FJBS 9-2023 Bagasse-based construction composites
T/SHMHZQ 090-2021 General specification for aerogel composites

Association Francaise de Normalisation, composite tough material

NF ISO 15024:2002 Composites plastiques renforcés de fibres - Détermination de la ténacité à la rupture interlaminaire en mode I, Gic, de matériaux composites à matrice polymère renforcés de fibres unidirectionnelles
NF T57-404*NF ISO 15024:2002 Fibre-reinforced composites - Determination of mode I interlaminar fracture toughness, Gic, for unidirectionally reinforced materials.
XP T58-300-2*XP CEN/TS 15534-2:2007 Wood-plastics composites (WPC) - Part 2 : characterisation of WPC materials
NF T58-300-6*NF EN 15534-6+A1:2018 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) Part 6 : Specifications for fencing profiles and elements
NF T58-300-6/IN1*NF EN 15534-6/IN1:2018 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6 : specifications for fencing profiles and elements
NF EN 15534-4:2014 Composites à base de matières cellulosiques et de thermoplastiques (communément appelés composites bois-polymères (WPC) ou composites fibres d'origine naturelle (NFC)) - Partie 4 : spécifications relatives aux lames et dalles pour platelage
NF T58-300-1:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1 : test methods for characterisation of compounds and products
NF EN 15534-6/IN1:2018 Composites à base de matières cellulosiques et de thermoplastiques (communément appelés composites bois-polymères (WPC) ou composites fibres d'origine naturelle (NFC)) - Partie 6 : Spécifications relatives aux profiles et éléments pour clôtures
NF EN 15534-6+A1:2018 Composites à base de matières cellulosiques et de thermoplastiques (communément appelés composites bois-polymères (WPC) ou composites fibres d'origine naturelle (NFC)) - Partie 6 : Spécifications relatives aux profilés et éléments pour clôtures
NF T58-300-5*NF EN 15534-5:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5 : specifications for cladding profiles and tiles
NF T58-300-4*NF EN 15534-4:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 4 : specifications for decking profiles and tiles
NF EN 15534-5:2014 Composites à base de matières cellulosiques et de thermoplastiques (communément appelés composites bois-polymères (WPC) ou composites fibres d'origine naturelle (NFC)) - Partie 5 : spécifications relatives aux lames et plaques pour bardage et la...
NF T58-300-1/IN1*NF EN 15534-1/IN1:2018 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1 : Test methods for characterisation of compounds and products
NF T58-300-1*NF EN 15534-1+A1:2018 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1 : Test methods for characterisation of compounds and products
NF EN 15534-1/IN1:2018 Composites à base de matières cellulosiques et de thermoplastiques (communément appelés composites bois-polymères (WPC) ou composites fibres d'origine naturelle (NFC)) - Partie 1 : Méthodes d'essai pour la caractérisation des compositions et d...
NF EN 15534-1+A1:2018 Composites à base de matières cellulosiques et de thermoplastiques (communément appelés composites bois-polymères (WPC) ou composites fibres d'origine naturelle (NFC)) - Partie 1 : Méthodes d'essai pour la caractérisation des compositions et d...
NF ISO 15034:2001 Composites - Préimprégnés - Détermination de l'écoulement de résine
NF C26-144-3/A1:1999 Combined flexible materials for electrical insulation - Part 3 : specifications for individual materials.
NF C26-144-3*NF EN 60626-3:2008 Combined flexible materials for electrical insulation - Part 3 : specifications for individual materials
NF C26-144-3:1997 Combined flexible materials for electrical insulation - Part 3 : specifications for individual materials.
NF EN 13421:2006 Plastiques - Compositions de moulage thermodurs - Composites et fibres de renfort - Préparation des éprouvettes pour déterminer l'anisotropie des propriétés des composites de moulage par compression
XP CEN/TS 19101:2022 Calcul des structures en matériaux composites
NF EN 16245-5:2013 Composites plastiques renforcés de fibres - Déclaration des caractéristiques des matières premières - Partie 5 : exigences particulières pour les matériaux d'âme
NF T57-105*NF EN ISO 14125:1998 Fibre-reinforced plastic composites. Determination of flexural properties.
NF T57-120-5*NF EN 16245-5:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 5: specific requirements for core materials
NF T54-303-2*NF EN ISO 13894-2:2015 High-pressure decorative laminate - Composite elements - Part 2 : specifications for composite elements with wood-based substrates for interior use
NF EN ISO 14125:1998 Composites plastiques renforcés de fibres - Détermination des propriétés de flexion
XP CEN/TS 15534-2:2007 Composites bois-plastiques (WPC) - Partie 2 : caractérisation des matièriaux en WPC
NF T57-120-1*NF EN 16245-1:2013 Fibre-reinforced plastic composites -Declaration of raw material characteristics - Part 1: general requirements
NF T57-120-4*NF EN 16245-4:2013 Fibre-reinforced plastic composites -Declaration of raw material characteristics - Part 4 : specific requirements for fabrics
NF EN 13706-1:2003 Composites en plastiques renforcés - Spécification pour les profilés pultrudés - Partie 1 : désignation
NF A03-180:2006 Metallic materials - Determination of plane-strain fracture toughness.
NF S91-215:2009 Dentistry - Polymer-based restorative materials.
NF EN 16245-3:2013 Composites plastiques renforcés de fibres - Déclaration des caractéristiques des matières premières - Partie 3 : exigences particulières pour les fibres
NF EN 16245-4:2013 Composites plastiques renforcés de fibres - Déclaration des caractéristiques des matières premières - Partie 4 : exigences particulières pour les tissus
NF EN ISO 3126:2005 Systèmes de canalisations en plastiques - Composants en plastiques - Détermination des dimensions
NF EN ISO 14126:2000 Composites plastiques renforcés de fibres - Détermination des caractéristiques en compression dans le plan
NF EN 12970:2000 Composites - Préimprégnés - Détermination du temps de gélification
NF ISO 15040:2001 Composites - Préimprégnés - Détermination du temps de gélification
NF T57-120-3*NF EN 16245-3:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3 : specific requirements for fibre

U.S. Military Regulations and Norms, composite tough material

ARMY MIL-HDBK-17-2 F-2002 COMPOSITE MATERIALS HANDBOOK VOLUME 2. POLYMER MATRIX COMPOSITES MATERIALS PROPERTIES
ARMY MIL-HDBK-17/5 VALID NOTICE 1-2013 Composite Materials Handbook Volume 5 Ceramic Matrix Composites
ARMY MIL-PRF-62419 A-1996 COMPOSITE MATERIALS FOR MILITARY VEHICLES
ARMY MIL-PRF-62419 B-2010 COMPOSITE MATERIALS FOR MILITARY VEHICLES
ARMY UFGS-06 41 16.00 10-2010 LAMINATE CLAD ARCHITECTURAL CASEWORK
ARMY MIL-HDBK-17-5-2002 COMPOSITE MATERIALS HANDBOOK VOLUME 5. CERAMIC MATRIX COMPOSITES
ARMY MIL-HDBK-17-1 F-2002 VOLUME 1. POLYMER MATRIX COMPOSITES GUIDELINES FOR CHARACTERIZATION OF STRUCTURAL MATERIALS

FI-SFS, composite tough material

SFS 2001-1967

PT-IPQ, composite tough material

NP 148-1958

Professional Standard - Aviation, composite tough material

HB 7402-1996 GIC test method for mode I interlaminar fracture toughness of carbon fiber composite laminates
HB 7403-1996 GⅡC test method for mode Ⅱ interlaminar fracture toughness of carbon fiber composite laminates
HB 7718.1-2002 Test method of interlaminar fracture toughness of carbon fiber composite laminates in hot-wet environments Part 1:Test method of mode Ⅰ interlaminar fracture toughness
HB 7718.2-2002 Test method of interlaminar fracture toughness of carbon fiber composite laminates in hot-wet environments Part 2:Test method of mode Ⅱ interlaminar fracture toughness
HB/Z 306-1997 Composite molding process combination
HB 7741-2004 General tolerances for composite material parts
HB/Z 326-1998 Composite molding process
HB 5859.2-1992 Specifications for drawing of composite components
HB/Z 175-1990 High pressure water-jet cutting composite materials

API - American Petroleum Institute, composite tough material

API BULL 6AM-1989 BULLETIN ON MATERIAL TOUGHNESS FIRST EDITION
API TR 6AM-1995 Technical Report on Material Toughness (Second Edition; Formerly Bulletin 6AM)

European Committee for Standardization (CEN), composite tough material

PD CEN/TS 17158:2018 Composites made from cellulose based materials and thermoplastics (usually called wood polymer composites (WPC) or natural fibre composites (NFC)) - Determination of particle size of lignocellosic material
PD CEN/TS 15534-2:2007 Wood-plastics composites (WPC) - Part 2: Characterisation of WPC materials
EN 15534-1:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products
EN 15534-6:2015 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements
EN 16245-5:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 5: Specific requirements for core materials
EN 16245-1:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 1: General requirements
EN ISO 3990:2023 Dentistry - Evaluation of antibacterial activity of dental restorative materials, luting materials, fissure sealants and orthodontic bonding or luting materials (ISO 3990:2023)
EN ISO 12737:1999 Metallic Materials - Determination of Plane-Strain Fracture Toughness
EN 16245-3:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre
EN 15534-4:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 4: Specifications for decking profiles and tiles
EN 15534-5:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles
PD CEN/TS 15534-1:2007 Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products
EN 13706-1:2002 Reinforced plastic composites - Specification for pultruded profiles - Part 1: Designation
EN 12245:2009+A1:2011 Transportable gas cylinders - Fully wrapped composite cylinders
EN ISO 4049:2019 Dentistry - Polymer-based restorative materials (ISO 4049:2019)

RO-ASRO, composite tough material

STAS 12065-1982 Solid electrical insulating materials CONBINED FLEXIBLE MATERIALS Methods of test

SAE - SAE International, composite tough material

SAE CMH-17-5A-2017 Composite Materials Handbook Volume 5 (Ceramic Matrix Composites)
SAE CMH-17-4B-2013 COMPOSITE MATERIALS HANDBOOK VOLUME 4 (METAL MATRIX COMPOSITES)
SAE CMH-17-6-2013 COMPOSITE MATERIALS HANDBOOK VOLUME 6 (STRUCTURAL SANDWICH COMPOSITES; First Edition)
SAE R-440-2015 Economics of Composites
SAE ARP5143A-2018 Vacuum Bagging of Thermosetting Composite Repairs
SAE ARP1704A-1993 SHORT-BAR FRACTURE TOUGHNESS OF METALLIC MATERIALS@ DETERMINATION OF
SAE PT-164-2014 Design of Automotive Composites
SAE AS7118A-2008 Nadcap Requirements for Composites
SAE PT-202-2019 Material and Process Modeling of Aerospace Composites
SAE ARP6287-2018 Environmental Degradation of Composite Materials
SAE PT-200-2019 Damage and Repair of Aerospace Composite Materials
SAE R-401-2011 ENGINEERED TRIBOLOGICAL COMPOSITES The Art of Friction Material Development
SAE AIR4844-1994 Composites and Metal Bonding Glossary
SAE AIR4844A-1997 Composites and Metal Bonding Glossary
SAE AIR4844C-2017 Composites and Metal Bonding Glossary

American Society for Testing and Materials (ASTM), composite tough material

ASTM E1922-97 Standard Test Method for Translaminar Fracture Toughness of Laminated Polymer Matrix Composite Materials
ASTM D5801-95(2006) Standard Test Method for Toughness and Tenacity of Bituminous Materials
ASTM D5801-17 Standard Test Method for Toughness and Tenacity of Asphalt Materials
ASTM E1922/E1922M-22 Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
ASTM D5801-12 Standard Test Method for Toughness and Tenacity of Bituminous Materials
ASTM E1922-04(2015) Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
ASTM D7078/D7078M-05 adjunct Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
ASTM D7078/D7078M-19 Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
ASTM D7078/D7078M-20 Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
ASTM D7078/D7078M-20e1 Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
ASTM D707-15 Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds (CAB)
ASTM D3878-19 Standard Terminology for Composite Materials
ASTM D3878-98 Standard Terminology Composite Materials
ASTM D3878-20a Standard Terminology for Composite Materials
ASTM D3878-19a Standard Terminology for Composite Materials
ASTM D3878-20 Standard Terminology for Composite Materials
ASTM D3878-18 Standard Terminology for Composite Materials
ASTM D3878-20b Standard Terminology for Composite Materials
ASTM D3878-16 Standard Terminology for Composite Materials
ASTM D5528-01 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D5528-94a Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D5528-01(2007) Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D5528-01(2007)e3 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D5528/D5528M-21 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D3878-00 Standard Terminology Composite Materials
ASTM D3878-01 Standard Terminology Composite Materials
ASTM D3878-03 Standard Terminology for Composite Materials
ASTM D3878-03a Standard Terminology for Composite Materials
ASTM D3878-04a Standard Terminology for Composite Materials
ASTM D3878-04 Standard Terminology for Composite Materials
ASTM D3878-07 Standard Terminology for Composite Materials
ASTM D3878-07(2013) Standard Terminology for Composite Materials
ASTM D3878-15 Standard Terminology for Composite Materials
ASTM D3878-23 Standard Terminology for Composite Materials
ASTM D5528-13 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D5528-01(2007)e1 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D5528-01(2007)e2 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D7905/D7905M-19 Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D7905/D7905M-19e1 Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D1055-04 Standard Specifications for Flexible Cellular Materials-Latex Foam
ASTM D1055-09 Standard Specifications for Flexible Cellular Materials-Latex Foam
ASTM D5461-93(1998) Standard Test Method for Rubber Additives-Wet Sieve Analysis of Powdered Rubber Chemicals
ASTM D5461-06(2021) Standard Test Method for Rubber Compounding Materials—Wet Sieve Analysis of Powdered Rubber Compounding Materials
ASTM D5461-06(2017) Standard Test Method for Rubber Compounding Materials&x2014;Wet Sieve Analysis of Powdered Rubber Compounding Materials
ASTM D7905/D7905M-14 Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D6671/D6671M-19 Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
ASTM F806-99a Standard Test Method for Compressibility and Recovery of Laminated Composite Gasket Materials
ASTM D6671/D6671M-13 Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
ASTM D4762-88(2001) Standard Guide for Testing Automotive/Industrial Composite Materials
ASTM D4762-88(1995)e1 Standard Guide for Testing Automotive/Industrial Composite Materials

Professional Standard - Medicine, composite tough material

YY/T 1294.2-2015 Implants for Surgery—Ceramic materials—Part 2:Composite materials based on a high purity alumina matrix with zirconia reinforcemen
YY 91042-1999 dental composite resin filling material

PL-PKN, composite tough material

PN C89103 ArkusZ03-1975 Terminology of plastics Compounding materials

BELST, composite tough material

STB 1064-97 Floor tiles from thermoplastic material. Composites. Specifications
STB 1065-97 Roof tile from thermoplastic material composites. Specifications
STB 2200-2011 Materials polymeric composite. Methods of definition of colour stability under influence of artificial climatic factors
STB 1227-2000 Sanitary wares on the base of composite materials. Specifications

CEN - European Committee for Standardization, composite tough material

PREN 15534-5-2019 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles
EN ISO 12737:2010 Metallic materials - Determination of plane-strain fracture toughness
EN ISO 12737:2005 Metallic materials - Determination of plane-strain fracture toughness

German Institute for Standardization, composite tough material

DIN EN 15534-5:2019 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles; German and English version prEN 15534-5:2019
DIN CEN/TS 17158:2018-06*DIN SPEC 68158:2018-06 Composites made from cellulose based materials and thermoplastics (usually called wood polymer composites (WPC) or natural fibre composites (NFC)) - Determination of particle size of lignocellosic material; German version CEN/TS 17158:2018
DIN EN 15534-5:2014-04 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles; German version EN 15534-5:2014 / Note: To be re...
DIN EN 15534-1:2018-02 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products; German version EN 15534-1:2014+A1:...
DIN CEN/TS 15534-2:2007 Wood-plastics composites (WPC) - Part 2: Characterisation of WPC materials; German version CEN/TS 15534-2:2007
DIN EN 15534-5:2019-02 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles; German and English version prEN 15534-5:2019 / ...
DIN EN 15534-6:2018-01 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements; German version EN 15534-6:2015+A1:2017
DIN EN 15534-4:2014-04 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 4: Specifications for decking profiles and tiles; German version EN 15534-4:2014
DIN EN 13421:2006-05 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites; German version EN 13421:2005
DIN EN 15534-6:2018 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements (includes Amendment A1:2017)
DIN CEN/TS 15534-3:2007 Wood-plastics composites (WPC) - Part 3: Characterisation of WPC products; German version CEN/TS 15534-3:2007
DIN EN 15534-5:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles; German version EN 15534-5:2014
DIN EN 15534-4:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 4: Specifications for decking profiles and tiles; German version EN 15534-4:2014
DIN EN 60626-3:2013 Combined flexible materials for electrical insulation - Part 3: Specifications for individual materials (IEC 60626-3:2008 + A1:2012); German version EN 60626-3:2008 + A1:2012
DIN EN 60626-3:2009 Combined flexible materials for electrical insulation - Part 3: Specifications for individual materials (IEC 60626-3:2008); German version EN 60626-3:2008 + Cor.:2008
DIN EN 16245-5:2013-08 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 5: Specific requirements for core materials; German version EN 16245-5:2013
DIN EN 15534-1:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products; German version EN 15534-1:2014
DIN EN 16245-1:2013-07 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 1: General requirements; German version EN 16245-1:2013
DIN 66084:2021 Classification of burning behaviour of upholstered compounds
DIN 66084:2003 Classification of burning behaviour of upholstered compounds
DIN EN 15534-1:2018 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products (includes Amendment A1:2017)
DIN EN ISO 14125:2011-05 Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998 + Cor.1:2001 + Amd.1:2011); German version EN ISO 14125:1998 + AC:2002 + A1:2011
DIN CEN/TS 15534-2:2007-08 Wood-plastics composites (WPC) - Part 2: Characterisation of WPC materials; German version CEN/TS 15534-2:2007
DIN EN ISO 12737:2005 Metallic materials - Determination of plane-strain fracture toughness (ISO 12737:2005); English version of DIN EN ISO 12737
DIN EN ISO 4049:2019-09 Dentistry - Polymer-based restorative materials (ISO 4049:2019); German version EN ISO 4049:2019
DIN EN 16245-4:2013-07 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 4: Specific requirements for fabrics; German version EN 16245-4:2013
DIN EN 16245-3:2013-08 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre; German version EN 16245-3:2013
DIN CEN/TS 15534-1:2007 Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products; German version CEN/TS 15534-1:2007
DIN EN 13706-1:2003-02 Reinforced plastic composites - Specification for pultruded profiles - Part 1: Designation; German version EN 13706-1:2002

AENOR, composite tough material

UNE-EN 15534-4:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 4: Specifications for decking profiles and tiles
UNE-EN 15534-5:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles
UNE-EN 13421:2006 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
UNE-EN 16245-5:2014 Fibre-reinforced plastic composites. Declaration of raw material characteristics. Part 5: Specific requirements for core materials
UNE-EN 16245-1:2014 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 1: General requirements
UNE-CEN/TS 15534-2:2008 EX Wood-plastics composites (WPC) - Part 2: Characterisation of WPC materials
UNE-EN 16245-4:2014 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 4: Specific requirements for fabrics
UNE-EN 16245-3:2014 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre
UNE-EN 13706-1:2003 Reinforced plastics composites - Specifications for pultruded profiles - Part 1: Designation.

工业和信息化部, composite tough material

JC/T 2622-2021 Purification material sepiolite based composite material
JC/T 2371-2016 Composite yarn for friction materials
JC/T 2410-2017 Composite gasket material
JC/T 2006-2021 Composite fiber for friction materials
YS/T 1485-2021 Iron silicon aluminum based composite absorbing material
JC/T 2479-2018 Cement-based composite insulation board

(U.S.) Ford Automotive Standards, composite tough material

FORD M5B277-A-1989 WASHER COMPOUND - ALKALINE, AIR
FORD E-MR002-4004-1983 MANGANESE: CHROMIUM: COMPOSITE: BRIQUETTES
FORD M99B151-A-1985 PAINT SPRAYBOOTH WATER WASH COMPOUND - LIQUID POLYMERIC-FLOC FORMING TYPE

Society of Automotive Engineers (SAE), composite tough material

SAE ARP4977-1996 Drying of Thermosetting Composite Materials
SAE ARP4977-2021 DRYING OF THERMOSETTING COMPOSITE MATERIALS
SAE ARP4991-1998 Core Restoration of Thermosetting Composite Components
SAE ARP5143-2011 Vacuum Bagging of Thermosetting Composite Repairs
SAE ARP4991A-2014 Core Restoration of Thermosetting Composite Components
SAE ARP4118A-2013 Isolation and Corrosion Protection of Dissimilar Materials, Carbon Composite Structure Repair
SAE ARP5089-2011 COMPOSITE REPAIR NDT/NDI HANDBOOK
SAE ARP1704-1981 SHORT-BAR FRACTURE TOUGHNESS OF METALLIC MATERIALS Determination of
SAE ARP1704A-1981 Short-Bar Fracture Toughness of Metallic Materials, Determination Of
SAE ARP5143-2002 Vacuum Bagging of Thermosetting Composite Repairs
SAE AMS3898A-2011 INTERLEAF CARRIER MATERIAL, COMPOSITE TAPE
SAE AMS3898-1975 INTERLEAF CARRIER MATERIAL, COMPOSITE TAPE

ES-UNE, composite tough material

UNE-CEN/TS 17158:2018 Composites made from cellulose based materials and thermoplastics (usually called wood polymer composites (WPC) or natural fibre composites (NFC)) - Determination of particle size of lignocellosic material (Endorsed by Asociación Española de Normaliz...
UNE-EN 15534-6:2016+A1:2018 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements
UNE-EN 15534-1:2014+A1:2018 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products
UNE-EN ISO 14125/AC:2002 Fibre-reinforced plastic composites - Determination of flexural properties. (ISO 14125:1998/Cor. 1:2001)
UNE-CEN ISO/TS 23818-2:2022 Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines - Part 2: Resin-fibre composite (RFC) material (ISO/TS 23818-2:2021) (Endorsed by Asociación Española de Normalización in October of 2022.)
UNE-EN ISO 4049:2020 Dentistry - Polymer-based restorative materials (ISO 4049:2019)

Indonesia Standards, composite tough material

SNI 15-1569-1989 Refractory mulitte
SNI 8154-2015 Wood plastic composite

GM North America, composite tough material

GM196M-1994 Composite Bearing Material Revision A
GM GM2218M-1994 Sound Barriers Composites
GM GM3881M-1989 Bearing Composites
GM GM196M-1994 Composite Bearing Material
GM GM258M-2003 Composite Thermal Insulation
GM GM7464M-2003 Composite Heat Shield Material
GM GM198M-2003 Insulation - Basalt Rock Fiber Composite
GM GM9807P-1988 Adhesive - Assembling Composite Overlap Shears
GM GM6415M-1997 Aluminum Metal Matrix Composite Tubing
GM GM9003P-1988 Corrosion Test for Seal Compounds

Institute of Interconnecting and Packaging Electronic Circuits (IPC), composite tough material

IPC TA-720 SECTION 7 Composite Laminates

Korean Agency for Technology and Standards (KATS), composite tough material

KS I 3161-2014 Recycled composite
KS I 3161-2016 Recycled composite
KS M ISO 14125:2012 Fibre-reinforced plastic composites－Determination of flexural properties
KS L 6520-1988(1998) TESTING METHOD FOR TOUGHNESS OF ARTIFICIAL ABRASIVES (BALL MILL TEST)
KS L 6520-1986 TESTING METHOD FOR TOUGHNESS OF ARTIFICIAL ABRASIVES (BALL MILL TEST)
KS M ISO 14125-2012(2017) Fibre-reinforced plastic composites－Determination of flexural properties
KS M ISO 14125-2012(2022) Fibre-reinforced plastic composites－Determination of flexural properties
KS B ISO 12737:2002 Metallic materials-Determination of plane-strain fracture toughness
KS B ISO 12737:2015 Metallic materials－Determination of plane－strain fracture toughness
KS M ISO 8067:2018 Flexible cellular polymeric materials — Determination of tear strength
KS D 0052-1994 Glossery of terms used in metal matrix composites
KS I 3170-2014 Building facade recycled composite
KS I 3170-2016 Building facade recycled composite
KS M ISO 14126-2012(2022) Fibre-reinforced plastic composites－Determination of compressive properties in the in-plane direction
KS M ISO 14126-2012(2017) Fibre-reinforced plastic composites－Determination of compressive properties in the in-plane direction
KS M 3526-2007 Reclaimed plastic for manufacture composite of bowl
KS C IEC 60626-3:2003 Combined flexible materials for electrical insulation-Part 3:Specifications for individual materials
KS C IEC 60626-3:2017 Combined flexible materials for electrical insulation－Part 3：Specifications for individual materials

Yunnan Provincial Standard of the People's Republic of China, composite tough material

DB53/T 493-2013 Stone Plastic Composite

Sichuan Provincial Standard of the People's Republic of China, composite tough material

DB51/T 1244-2011 Composite Specimen

Professional Standard - Forestry, composite tough material

LY/T 2565-2015 Bamboo Plastic Composite

GOSTR, composite tough material

GOST R 57970-2017 Carbon composites. Carbon composites reinforced with carbon fiber. Classification
GOST R 57924-2017 Polymer composites. Methods for determination of flammability of the materials for used in aviation technics
GOST R 57859-2017 Polymer composites. Test method for determining resistance of synthetic polymeric materials to fungi
GOST R 58016-2017 Ceramic composites. Silicon carbide composites reinforced with silicon carbide fiber. Classification
GOST 34367.2-2017 Polymer composites. Acquisition and presentation of comparable numerical property data for long-fibre-reinforced composites
GOST R 56661-2019 Polymer composites. Method for determination of ？sandwich？ core materials Poisson's Ratio
GOST R 57953-2017 Ceramics composites. Test Method for bond strength of ceramic materials
GOST R 56678-2019 Polymer composites. Method for determination of sandwich core materials dimensional stability

Professional Standard - Machinery, composite tough material

JB/T 12748-2015 Methods of test for the performance of wood alternative composite material for delivery drums for wires and cables
JB/T 12616-2016 Inspection methods of fracture toughness for hardmetals tool base material
JB/T 4061.1-1995 Soft composite materials Polyester film aromatic polyamide fiber paper soft composite materials
JB/T 4062.1-1995 Soft composite materials Polyimide film aromatic polyamide fiber paper soft composite materials

ES-AENOR, composite tough material

UNE 53-223 Pt.1-1972

SE-SIS, composite tough material

SIS SS IEC 626:1983 Specrfications for combined flexible materials for electrical insulation
MNC 328-1990 Metallic materials — Testing — Impact toughness — Summary

Guangdong Provincial Standard of the People's Republic of China, composite tough material

DB44/T 1608-2015 Inorganic High Performance Fiber Composite Materials
DB44/T 1878-2016 Inorganic high-performance fiber composite drainage pipe
DB44/T 349-2006 Wood-plastic composites - Technical condition
DB44/T 1609-2015 Inorganic high-performance fiber composite inspection manhole cover
DB44/T 1877-2016 Inorganic high-performance fiber composite power support

American Society of Mechanical Engineers (ASME), composite tough material

ASME STP-PT-017-2008 Properties for Composite Materials in Hydrogen Science

ZA-SANS, composite tough material

SANS 10070:2007 The installation of resilient thermoplastic and similar flexible floor covering materials

国家市场监督管理总局、中国国家标准化管理委员会, composite tough material

GB/T 38338-2019 Test method for fracture toughness of carbon materials
GB/T 39484-2020 Fibre-reinforced plastic composites—Determination of the mode Ⅱ fracture resistanc for unidirectionally reinforced materials using the calibrated end-loaded split(C-ELS) test and an effective crack length approach
GB/T 41487-2022 Composite sealing gasket material
GB/T 41491-2022 Composite pole in distribution network
GB/T 39549-2020 Fiber reinforced thermosetting composites septic tank

Professional Standard - Textile, composite tough material

FZ/T 64006-2015 Composite thermal insulation materials.Wool fiber composite wadding
FZ/T 64020-2011 Composite thermal insulation materials.Man-made fiber composite wadding
FZ/T 64006-1996 Composite thermal insulation material wool type composite wadding
FZ/T 64002-2011 Composed thermal insulation material. Wadding composed of coated metal film
FZ/T 64002-2021 Composite thermal insulation material Metal-coated composite flakes

Danish Standards Foundation, composite tough material

DS/EN 13421:2006 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
DS/EN 60626-3:2008 Combined flexible materials for electrical insulation - Part 3: Specifications for individual materials
DS/EN 60626-3/A1:2012 Combined flexible materials for electrical insulation - Part 3: Specifications for individual materials
DS/EN 16245-5:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 5: Specific requirements for core materials
DS/EN 16245-1:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 1: General requirements
DS/EN ISO 14125/A1:2011 Fibre-reinforced plastic composites - Determination of flexural properties
DS/EN ISO 14125/Corr.1:2002 Fibre-reinforced plastic composites - Determination of flexural properties
DS/EN ISO 14125:1999 Fibre-reinforced plastic composites - Determination of flexural properties
DS/CEN/TS 15534-2:2007 Wood-plastics composites (WPC) - Part 2: Characterisation of WPC materials
DS/EN 16245-3:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre
DS/EN 16245-4:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 4: Specific requirements for fabrics
DS/ISO/TR 22293:2021 Evaluation of methods for assessing the release of nanomaterials from commercial, nanomaterial-containing polymer composites
DS/EN 13706-1:2003 Reinforced plastic composites - Specifications for pultruded profiles - Part 1: Designation

Lithuanian Standards Office , composite tough material

LST EN 13421-2006 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
LST EN 60626-3-2008 Combined flexible materials for electrical insulation -- Part 3: Specifications for individual materials (IEC 60626-3:2008)
LST EN 60626-3-2008/AC-2009 Combined flexible materials for electrical insulation - Part 3: Specifications for individual materials (IEC 60626-3:2008)
LST EN 13706-1-2003 Reinforced plastics composites - Specifications for pultruded profiles - Part 1: Designation
LST EN 60626-3-2008/A1-2012 Combined flexible materials for electrical insulation -- Part 3: Specifications for individual materials (IEC 60626-3:2008/A1:2012)

未注明发布机构, composite tough material

DIN EN 1993-1-10 NA:2016 Part 1-10: Material toughness and through-thickness properties
BS EN ISO 3990:2023 Dentistry — Evaluation of antibacterial activity of dental restorative materials, luting materials, fissure sealants and orthodontic bonding or luting materials
DIN EN ISO 12737:1999 Metallic materials – Determination of plane-strain fracture toughness

Military Standard of the People's Republic of China-General Armament Department, composite tough material

GJB 9968-2021 Specification for modified polyvinyl alcohol composite materials
GJB 9965-2021 Specification for heat-sealable flexible transparent barrier materials
GJB 9315-2018 Polymer Matrix Composite Materials Equivalency Assessment Procedure
GJB 756-1989 Aluminum plastic cloth extrusion composite material
GJB 2605-1996 Specification for heat-sealable flexible antistatic barrier materials
GJB 2605A-2021 Specification for heat-sealable flexible antistatic barrier materials
GJB 2492-1995 General specification for flexible waterproof and oil-resistant barrier materials

CZ-CSN, composite tough material

CSN 64 0125-1953
CSN 66 6302-1987 Rubber compounding ingredients. Abbreviations
CSN 64 0124-1953

Professional Standard - Building Materials, composite tough material

JC/T 2222-2014 Terms for wood-plastic composite
JC/T 2006-2010 Composite fiber for friction materials

VN-TCVN, composite tough material

TCVN 6453-2008 Carbon composite implants

IN-BIS, composite tough material

US-FCR, composite tough material

FCR UFGS-06 41 16.00 10-2010 LAMINATE CLAD ARCHITECTURAL CASEWORK
FCR FED H-08-1 SEC 03521-1987 INSULATING CONCRETE COMPOSITE
FCR UFGS-31 62 21-2008 PILING: COMPOSITE, WOOD AND CAST IN-PLACE CONCRETE

ESDU - Engineering Sciences Data Unit, composite tough material

COMPSW-2006 Composites Series - Software.
ESDU 91003-1991 Delamination of tapered composites.

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, composite tough material

GB/T 34182-2017 Composite cable bracket
GB/T 34558-2017 Terminology for metal matrix composites
GB/T 33334-2016 Test method for strength properties of adhesives in shear by tension loading of single-lap-joint laminated assemblies(composite and composite)
GB/T 34559-2017 Test method for compressive property of C/C composites
GB/T 33501-2017 Test method for tensile property of C/C composites
GB/T 34006-2017 Cardanol modified phenolic resin for composite material
GB/T 34445-2017 Test method of hot-tack property for heat sealing surfaces of thermoplastic polymer and thermoplastic composite material

European Committee for Electrotechnical Standardization（CENELEC）, composite tough material

EN 60626-3:2008/corrigendum Oct. 2008 Combined flexible materials for electrical insulation - Part 3: Specifications for individual materials
EN 60626-3:2008 Combined flexible materials for electrical insulation - Part 3: Specifications for individual materials

International Organization for Standardization (ISO), composite tough material

ISO/CD TR 22785-2:2023 Coatings on plastics and composites — Part 2: Weathering
ISO 3990:2023 Dentistry — Evaluation of antibacterial activity of dental restorative materials, luting materials, fissure sealants and orthodontic bonding or luting materials
ISO/CD TR 22785-5:2023 Coatings on plastics and composites — Part 5: Chemical resistance
ISO 4049:2019 Dentistry — Polymer-based restorative materials
ISO 20819:2018 Plastics - Wood-plastic recycled composites (WPRC) - Specification
ISO 12737:2005 Metallic materials - Determination of plane-strain fracture toughness
ISO 12737:1996 Metallic materials - Determination of the plane-strain fracture toughness
ISO 12737:2010 Metallic materials — Determination of plane-strain fracture toughness
ISO/TR 22293:2021 Evaluation of methods for assessing the release of nanomaterials from commercial, nanomaterial-containing polymer composites
ISO 4049:2009 Dentistry - Polymer-based restorative materials
ISO 14125:1998/Amd 1:2011 Fibre-reinforced plastic composites - Determination of flexural properties; Amendment 1
ISO 15040:1999 Composites - Prepregs - Determination of gel time
ISO 15034:1999 Composites - Prepregs - Determination of resin flow

YU-JUS, composite tough material

JUS M.C3.326-1988 Plain bearings. Hardness testlng of bearlng materials. Compound materials

Professional Standard - Non-ferrous Metal, composite tough material

YS/T 974-2014 Copper and copper alloy strip for compound contacts

Standard Association of Australia （SAA）, composite tough material

AS 1145.5:2001 Determination of tensile properties of plastics materials - Test conditions for fibre-reinforced plastic composites
AS/NZS 5024(Int):2005 Potting mixes, composts and other matrices - Examination for legionellae

Professional Standard - Urban Construction, composite tough material

CJ/T 212-2005 Water grate made of polymer matrix composites
CJ/T 130-2001 Composite material water grate of regenerated resins
CJ/T 211-2005 Inspection manhole lid made of polymer matrix composites

Japanese Industrial Standards Committee (JISC), composite tough material

JIS R 6128:1987 Ball mill test for toughness of artificial abrasives
JIS K 7017:1999 Fibre-reinforced plastics composites -- Determination of flexural properties
JIS T 6504:1995 Dental impression compound

Underwriters Laboratories (UL), composite tough material

UL 1694-1997 Tests for flammability of small polymeric component materials

Professional Standard - Electron, composite tough material

SJ 20857-2002 Specification for resistance foil composite material

Professional Standard - Construction Industry, composite tough material

JG/T 351-2012 Fiber reinforced composite bars
JG/T 364-2012 Fiber-reinforced composite grids

KR-KS, composite tough material

KS P ISO 4049-2017 Dentistry — Polymer-based restorative materials
KS M ISO 8067-2018 Flexible cellular polymeric materials — Determination of tear strength

Professional Standard - Traffic, composite tough material

JT/T 669-2006 Geosynthetics in highway engineerings Sort, capability demand and test method of composite materials
JT/T 1087.1-2016 Geosynthetics in highway engineering.Drainage materials.Part 1:Drainage geocomposite

Professional Standard - Aerospace, composite tough material

QJ 1607-1989 Regulations on Compilation of Process Standards for Non-metallic Materials and Composite Materials

Professional Standard - Light Industry, composite tough material

QB/T 1232-1991 Flexible polyurethane foam composite

轻工业部, composite tough material

QB 1232-1991 Flexible polyurethane foam composites

Taiwan Provincial Standard of the People's Republic of China, composite tough material

CNS 14185-1998 Method of test for toughness and tenacity of bituminous materials

WRC - Welding Research Council, composite tough material

BULLETIN 175-1972 PVRC RECOMMENDATIONS ON TOUGHNESS REQUIREMENTS FOR FERRITIC MATERIALS

American Welding Society (AWS), composite tough material

WRC 175:1972 PVRC Recommendations on Toughness Requirements for Ferritic Materials

Aerospace Industries Association, composite tough material

AIA NASM22529/1-1999 Grommet, Composite, Edging FSC 5325
AIA NAS 2014-1991 Pin-Rivet, Grooved; and Collar for Composite Materials

Aerospace Industries Association/ANSI Aerospace Standards, composite tough material

AIA/NAS NASM22529/2-2011 GROMMET, CUSHION COMPOSITE, EDGING

AIA/NAS - Aerospace Industries Association of America Inc., composite tough material

NASM22529/2-1999 Grommet@ Cushion Composite@ Edging

ABS - American Bureau of Shipping, composite tough material

ABS 93-1999 Composite Materials for Offshore Operations - 2

Professional Standard - Railway, composite tough material

TB/T 2674.2-1995 SMC Composite Signal Cable Box

Anhui Provincial Standard of the People's Republic of China, composite tough material

DB34/T 3894-2021 Reinforced Aluminum Matrix Composite Terminology

Liaoning Provincial Standard of the People's Republic of China, composite tough material

DB21/T 2418-2015 Spherical silicon composite building insulation material

US-AAMA, composite tough material

AAMA 311-2013 Voluntary Specification for Rigid Thermoplastic Cellulosic Composite Fenestration Exterior Profiles

International Electrotechnical Commission (IEC), composite tough material

IEC 60626-3:2002 Combined flexible materials for electrical insulation - Part 3: Specifications for individual materials

International Truck and Engine Corporation (ITEC), composite tough material

INTERN TMS 6041-2008 Flooring Components, Bus

Professional Standard - Goods and Materials, composite tough material

WB/T 1012-2000 Agricultural big canopy frame of magnesium oxychloride cement composite