ZH
RU
ES

How to calibrate xps

How to calibrate xps, Total:96 items.

In the international standard classification, How to calibrate xps involves: Analytical chemistry, Fibre optic communications, Optics and optical measurements, Paper and board, Environmental protection, Measurement of volume, mass, density, viscosity, Services, Construction industry, Buildings, Linear and angular measurements, Metrology and measurement in general, Safety of machinery, Mechanical testing, Vocabularies.

US-CFR-file, How to calibrate xps

CFR 20-702.243-2015 Employees'Benefits. Part702:Administration and procedure. SubpartB:Claims procedures. Section702.243:Settlement application; how submitted, how approved, how disapproved, criteria.
CFR 1-51.5-2014 General provisions. Part51:Incorporation by reference. Section51.5:How does an agency request approval?
CFR 33-148.702-2013 Navigation and navigable waters. Part148:Deepwater ports: general. Section148.702:How were the environmental review criteria developed?
CFR 33-148.110-2013 Navigation and navigable waters. Part148:Deepwater ports: general. Section148.110:How do I prepare my application?
CFR 33-148.709-2013 Navigation and navigable waters. Part148:Deepwater ports: general. Section148.709:How are these criteria reviewed and revised?
CFR 7-54.6-2014 Agriculture. Part54:Meats, prepared meats, and meat products (grading, certification, and standards). Subpart A:Regulations. Section54.6:How to obtain service.
CFR 21-803.23-2014 Food and Drugs. Part803:Medical device reporting (Eff. 8-14-15). Section803.23:Where can I find information on how to prepare and submit an MDR in electronic format?

The Society for Protective Coatings (SSPC), How to calibrate xps

SSPC CHAPTER 1-2004 HOW TO USE SSPC STANDARDS, SPECIFICATIONS, AND GUIDES

SSPC - The Society for Protective Coatings, How to calibrate xps

CHAPTER 1-2004 HOW TO USE SSPC STANDARDS@ SPECIFICATIONS@ AND GUIDES

American Society for Testing and Materials (ASTM), How to calibrate xps

ASTM E2735-13 Standard Guide for Selection of Calibrations Needed for X-ray Photoelectron Spectroscopy (XPS) Experiments

Korean Agency for Technology and Standards (KATS), How to calibrate xps

KS C IEC 61745-2001(2021) End－face image analysis procedure for the calibration of optical fibre geometry test setsthe calibration of optical fibre geometry test sets
KS C IEC 61745-2001(2016) End－face image analysis procedure for the calibration of optical fibre geometry test setsthe calibration of optical fibre geometry test sets
KS I ISO 14047:2010 Environmental management-Life cycle impact assessment-Examples of application of KS I ISO 14044
KS I ISO 14047:2014 Environmental management — Life cycle assessment — Illustrative examples on how to apply KS I ISO 14044 to impact assessment situations
KS B ISO 12179-2014(2019) Geometrical Product Specifications(GPS) — Surface texture: Profile method — Calibration of contact(stylus) instruments
KS B ISO 12179:2004 Geometrical Product Specifications(GPS)-Surface texture:Profile method-Calibration of contact(stylus) instruments
KS B ISO 12179:2014 Geometrical Product Specifications(GPS) — Surface texture: Profile method — Calibration of contact(stylus) instruments

American National Standards Institute （ANSI), How to calibrate xps

ANSI/TAPPI T1218 sp-2012 Calibration of reflectance standards for hemispherical geometry
ANSI/TIA-455-225-2002 FOTP225 - End Face Image Analysis Procedure for the Calibration of Optical Fibre Geometry Test Sets
ANSI/TIA/EIA 455-225-2002 FOTP225 - End Face Image Analysis Procedure for the Calibration of Optical Fibre Geometry Test Sets

International Organization for Standardization (ISO), How to calibrate xps

ISO/TR 14073:2017 Environmental management - Water footprint - Illustrative examples on how to apply ISO 14046
ISO/CD 5861 Surface chemical analysis — X-ray photoelectron spectroscopy — Method of intensity calibration for quartz-crystal monochromated Al Kα XPS instruments
ISO/DIS 5861:2023 Surface chemical analysis — X-ray photoelectron spectroscopy — Method of intensity calibration for quartz-crystal monochromated Al Kα XPS instruments
ISO/TR 14047:2012 Environmental management - Life cycle assessment - Illustrative examples on how to apply ISO 14044 to impact assessment situations
ISO 12179:2021 Geometrical product specifications (GPS) — Surface texture: Profile method — Calibration of contact (stylus) instruments
ISO 12179:2000 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments
ISO 11952:2019 Surface chemical analysis — Scanning-probe microscopy — Determination of geometric quantities using SPM: Calibration of measuring systems
ISO 11952:2014 Surface chemical analysis - Scanning-probe microscopy - Determination of geometric quantities using SPM: Calibration of measuring systems
ISO 25178-701:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments
ISO 12179:2000/cor 1:2003 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments; Technical Corrigendum 1

CZ-CSN, How to calibrate xps

CSN 99 6423-1988 Vertical cylindrical tanks. Calibration by geometrical methods. Verification

Danish Standards Foundation, How to calibrate xps

DS/EN 15221-2:2008 Facility Management - Part 2: Guidance on how to prepare Facility Management agreements
DS/ISO/TR 22100-1:2021 Safety of machinery – Relationship with ISO 12100 – Part 1: How ISO 12100 relates to type-B and type-C standards
DS/EN ISO 12179/Corr. 1:2007 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments
DS/EN ISO 12179:2000 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments
DS/CEN ISO/TR 22100-1:2021 Safety of machinery – Relationship with ISO 12100 – Part 1: How ISO 12100 relates to type-B and type-C standards (ISO/TR 22100-1:2021)
DS/EN ISO 25178-701:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments

Lithuanian Standards Office , How to calibrate xps

LST EN 15221-2-2007 Facility Management - Part 2: Guidance on how to prepare Facility Management agreements
LST EN ISO 12179:2001 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2000)
LST EN ISO 12179:2001/AC:2008 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2000/Cor 1:2003)
LST EN ISO 25178-701:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010)

AENOR, How to calibrate xps

UNE-EN 15221-2:2012 Facility Management - Part 2: Guidance on how to prepare Facility Management agreements
UNE 208003-003:2003 IN Guidelines on how to use anechoic enclosures that do not fulfil the requirements regarding normalized site attenuation for pre-compliance tests of products.
UNE-EN ISO 12179:2001 Geometrical Product Specifications (GPS) - Surface texture: Profil method - Calibration of contact (stylus) instruments. (ISO 12179:2000)
UNE-EN ISO 25178-701:2011 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010)

Association Francaise de Normalisation, How to calibrate xps

NF E11-018:2003 Geometrical product specification (GPS) - Calibration specimens - Plugs with grooves.
NF C93-809*NF EN 61745:2018 End-face image analysis procedure for the calibration of optical fibre geometry test sets
NF E05-056*NF EN ISO 12179:2022 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments
NF EN ISO 12179:2022 Spécification géométrique des produits (GPS) - États de surface : méthode du profil - Étalonnage des instruments à contact (palpeur)
NF E05-056:2000 Geometrical Product Specifications (GPS) - Surface texture : profil method - Calibration of contact (stylus) instruments.
NF EN ISO 25178-701:2010 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 701 : étalonnage et étalons de mesure pour les instruments à contact (à palpeur)
NF E05-031-701*NF EN ISO 25178-701:2010 Geometrical product specifications (GPS) - Surface texture : areal - Part 701 : calibration and measurement standards for contact (stylus) instruments.

British Standards Institution (BSI), How to calibrate xps

BS IEC 61745:1998 End-face image analysis procedure for the calibration of optical fibre geometry test sets
BS IEC 61745:1999 End-face image analysis procedure for the calibration of optical fibre geometry test sets
BS PD CEN ISO/TR 22100-1:2017 Safety of machinery - Relationship with ISO 12100. Part 1: How ISO 12100 relates to type-B and type-C standards (ISO/TR 22100-1:2015)
BS EN ISO 12179:2022 Geometrical product specifications (GPS). Surface texture: Profile method. Calibration of contact (stylus) instruments
BS EN ISO 5436-1:2001 Geometrical Product Specifications (GPS). Surface texture: Profile method; Measurement standards. Geometric product specifications (GPS). Surface texture. Profile method calibration. Measurement standards
PD 6591:1996 Guidelines on how to use anechoic enclosures that do not fulfil the requirements regarding normalized site attenuation for pre-compliance tests of products
BS EN ISO 25178-701:2010 Geometrical product specifications (GPS) - Surface texture - Areal - Calibration and measurement standards for contact (stylus) instruments
BS EN ISO 12179:2001 Geometrical product specifications (GPS). Surface texture. Profile method. Calibration of contact (stylus) instruments
BS ISO 11952:2019 Surface chemical analysis. Scanning-probe microscopy. Determination of geometric quantities using SPM: Calibration of measuring systems
20/30397768 DC BS EN ISO 12179. Geometrical product specifications (GPS). Surface texture: Profile method. Calibration of contact (stylus) instruments
BS EN ISO 25178-700:2023 Geometrical product specifications (GPS). Surface texture: Areal - Calibration, adjustment and verification of areal topography measuring instruments
BS EN 61745:2017 End-face image analysis procedure for the calibration of optical fibre geometry test sets - Part 1: Introduction and roadmap for standardization
BS ISO 16531:2013 Surface chemical analysis. Depth profiling. Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS

National Metrological Technical Specifications of the People's Republic of China, How to calibrate xps

JJF 1130-2005 Guide to the Estimation of Uncertainty in Calibration of Geometrical Measuring Equipment

Japanese Industrial Standards Committee (JISC), How to calibrate xps

JIS C 6828:2004 End-face image analysis procedure for the calibration of optical fiber geometry test sets

ES-UNE, How to calibrate xps

UNE-CEN ISO/TR 22100-1:2021 Safety of machinery - Relationship with ISO 12100 - Part 1: How ISO 12100 relates to type-B and type-C standards (ISO/TR 22100-1:2021) (Endorsed by Asociación Española de Normalización in March of 2021.)
UNE-EN 61745:2017 End-face image analysis procedure for the calibration of optical fibre geometry test sets (Endorsed by Asociación Española de Normalización in December of 2017.)
UNE-EN ISO 12179:2023 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2021)

German Institute for Standardization, How to calibrate xps

DIN CEN ISO/TR 22100-1:2021-09 Safety of machinery - Relationship with ISO 12100 - Part 1: How ISO 12100 relates to type-B and type-C standards (ISO/TR 22100-1:2021); German version CEN ISO/TR 22100-1:2021
DIN EN 61745:2018-06 End-face image analysis procedure for the calibration of optical fibre geometry test sets (IEC 61745:2017); German version EN 61745:2017
DIN EN ISO 12179:2023-04 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2021); German version EN ISO 12179:2022
DIN EN ISO 12179:2000 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2000); German version EN ISO 12179:2000
DIN EN ISO 12179:2023 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2021)
DIN EN ISO 25178-701:2011-01 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010); German version EN ISO 25178-701:2010

European Committee for Standardization (CEN), How to calibrate xps

EN ISO/TR 22100-1:2017 Safety of machinery - Relationship with ISO 12100 - Part 1: How ISO 12100 relates to type-B and type-C standards
EN ISO/TR 22100-1:2021 Safety of machinery - Relationship with ISO 12100 - Part 1: How ISO 12100 relates to type-B and type-C standards
CEN ISO/TR 22100-1:2021 Safety of machinery - Relationship with ISO 12100 - Part 1: How ISO 12100 relates to type-B and type-C standards (ISO/TR 22100-1:2021)
EN ISO 12179:2022 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2021)
EN ISO 12179:2000 Geometrical Product Specifications (GPS) - Surface Texture: Profile Method - Calibration of Contact (Stylus) Instruments
FprEN ISO 12179:2021 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO/FDIS 12179:2021)
EN ISO 25178-701:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010)

CEN - European Committee for Standardization, How to calibrate xps

CEN ISO/TR 22100-1:2017 Safety of machinery - Relationship with ISO 12100 - Part 1: How ISO 12100 relates to type-B and type-C standards

European Committee for Electrotechnical Standardization（CENELEC）, How to calibrate xps

EN 61745:2017 End-face image analysis procedure for the calibration of optical fibre geometry test sets

Association of German Mechanical Engineers, How to calibrate xps

VDI/VDE 2656 Blatt 1-2008 Determination of geometrical quantities by using of Scanning Probe Microscopes - Calibration of measurement systems

RU-GOST R, How to calibrate xps

GOST R 56269-2014 Environmental management. Life cycle assessment. Illustrative examples on how to apply ISO 14044 to impact assessment situations
GOST R 56270-2014 Environmental management. Life cycle assessment. Illustrative examples on how to apply ISO 14044 to goal and scope definition and inventory analysis

International Electrotechnical Commission (IEC), How to calibrate xps

IEC 61745:1998 End-face image analysis procedure for the calibration of optical fibre geometry test sets
IEC 61745:2017 End-face image analysis procedure for the calibration of optical fibre geometry test sets

(U.S.) Telecommunications Industries Association , How to calibrate xps

TIA/EIA-455-225-2002 FOTP-225 IEC-61745 End Face Image Analysis Procedure for the Calibration of Optical Fibre Geometry Test Sets
TIA-455-225-2015 FOTP-225 IEC-61745 End-Face Image Analysis Procedure for the Calibration of Optical Fibre Geometry Test Sets

AT-ON, How to calibrate xps

ONR CEN ISO/TR 22100-1:2021 Safety of machinery - Relationship with ISO 12100 - Part 1: How ISO 12100 relates to type-B and type-C standards (ISO/TR 22100-1:2021)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to calibrate xps

GB/T 19600-2004 Geometrical Product Specifications(GPS)Surface texture:Profile method-Calibration of contact(stylus)instruments
GB/T 42659-2023 Surface Chemical Analysis Scanning Probe Microscopy Determination of Geometric Quantities Using Scanning Probe Microscopy: Measurement System Calibration

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, How to calibrate xps

GB/T 33523.701-2017 Geometrical product specifications (GPS)—Surface texture: Areal— Part 701: Calibration and measurement standards for contact (stylus) instruments