Ultra-low emission of flue gas and exhaust gas

Ultra-low emission of flue gas and exhaust gas, Total:46 items.

In the international standard classification, Ultra-low emission of flue gas and exhaust gas involves: Air quality, Fuels, Vocabularies, Energy and heat transfer engineering in general, Construction materials, Internal combustion engines, Domestic, commercial and industrial heating appliances, Environmental protection.

Group Standards of the People's Republic of China, Ultra-low emission of flue gas and exhaust gas

T/CIECCPA 058-2023 Technical specifications for flue gas pollutants ultra-low emission of coke oven
T/CSES 25-2021 Granular coal based activated carbon for ultra low emission of flue gas from iron and steel industry
T/CECA-G 0023-2019 Acceptance requirements for comprehensive energy consumption of coal-fired industrial boilers with ultra-low emission of flue gas
T/CIECCPA 063-2023 Technical standard for ultra-low emission control of multi-pollutants in pellet flue gas for iron and steel industry
T/CCAS 022-2022 Ultra-low emission standard of air pollutants for cement industry
T/CSES 09-2020 Specification for verification for air pollutants ultra-low emission technologies of coal-fired power plants

Professional Standard - Environmental Protection, Ultra-low emission of flue gas and exhaust gas

HJ 2053-2018 Technical specifications for ultra-low emission flue gas treatment engineering in coal-fired power plants

US-FCR, Ultra-low emission of flue gas and exhaust gas

FCR UFGS-23 35 00.00 10-2009 OVERHEAD VEHICLE TAILPIPE [AND WELDING FUME] EXHAUST REMOVAL SYSTEM(S)

British Standards Institution (BSI), Ultra-low emission of flue gas and exhaust gas

BS ISO 8178-3:2019 Reciprocating internal combustion engines. Exhaust emission measurement. Test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using a filter type smoke meter
BS ISO 8178-3:1996 Reciprocating internal combustion engines - Exhaust emission measurement - Definitions and methods of measurement of exhaust gas smoke under steady state conditions
BS ISO 8178-3:1994 Reciprocating internal combustion engines - Exhaust emission measurement - Definitions and methods of measurement of exhaust gas smoke under steady state conditions
BS ISO 8178-9:2019 Reciprocating internal combustion engines. Exhaust emission measurement - Test cycles and test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using an opacimeter
BS ISO 8178-10:2002(2003) Reciprocating internal combustion engines — Exhaust emission measurement — Part 10 : Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
BS ISO 8178-9:2001 Reciprocating internal combustion engines - Exhaust emission measurement - Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transi ent conditions
BS ISO 8178-9:2012 Reciprocating internal combustion engines. Exhaust emission measurement. Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions

Hebei Provincial Standard of the People's Republic of China, Ultra-low emission of flue gas and exhaust gas

DB13/ 2169-2018 Ultra-low emission standards for air pollutants in the iron and steel industry
DB13/ 2167-2020 Ultra-low emission standards for air pollutants in the cement industry
DB13/ 2863-2018 Ultra-low emission standards for air pollutants in the coking chemical industry
DB13/ 2168-2020 Ultra-low emission standards for air pollutants in the flat glass industry

International Organization for Standardization (ISO), Ultra-low emission of flue gas and exhaust gas

ISO 8178-3:2019 Reciprocating internal combustion engines — Exhaust emission measurement — Part 3: Test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using a filter type
ISO 8178-9:2019 Reciprocating internal combustion engines — Exhaust emission measurement — Part 9: Test cycles and test procedures for measurement of exhaust gas smoke emissions from compression ignition engines usin

Japanese Industrial Standards Committee (JISC), Ultra-low emission of flue gas and exhaust gas

JIS B 8008-3:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 3: Definitions and methods of measurement of exhaust gas smoke under steady-state conditions
JIS B 8008-9:2004 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions

Association Francaise de Normalisation, Ultra-low emission of flue gas and exhaust gas

NF E37-211-9*NF ISO 8178-9:2019 Reciprocating internal combustion engines - Exhaust emission measurement - Part 9 : test cycles and test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using an opacimeter
NF D35-372*NF EN 1266:2003 Independent gas-fired convection heaters incorporating a fan to assist transportation of combustion air and/or flue gases.
NF D35-372/A1*NF EN 1266/A1:2005 Independent gas-fired convection heaters incorporating a fan to assist transportation of combustion air and/or flue gases
NF ISO 8178-3:2019 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 3 : définitions et méthodes de mesure de la fumée des gaz d'échappement dans des conditions stabilisées
NF E37-211-9:2012 Reciprocating internal combustion engines - Exhaust emission measurement - Part 9: test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
NF EN ISO 23210:2009 Émissions de sources fixes - Détermination de la concentration en masse de PM10/PM2,5 dans les effluents gazeux - Mesurage à des faibles concentrations au moyen d'impacteurs

Shandong Provincial Standard of the People's Republic of China, Ultra-low emission of flue gas and exhaust gas

DB37/T 2706-2015 Technical Specifications for Monitoring Low-concentration Exhaust Gases from Stationary Pollution Sources

CZ-CSN, Ultra-low emission of flue gas and exhaust gas

CSN IEC 761-6:1993 Equipment for continuously monitoring radioactivity in gaseous effluents. Part 6: Specific requirements for transuranic aerosol effluent monitors

Korean Agency for Technology and Standards (KATS), Ultra-low emission of flue gas and exhaust gas

KS R ISO 8178-3-2007(2022) Reciprocating internal combustion engines－Exhaust emission measurement－Part 3：Definitions and methods of measurement of exhaust gas smoke under steady-state conditions
KS B ISO 8178-3-2010 Reciprocating interal combustion engines-- Exhaust emission measurement--Part 3: Definaions and methods of measurement of exhaust gas smoke under steady -stste conditions
KS B ISO 8178-10-2010 Reciprocating interal combustion engines-- Exhaust emission measurement--Part 10: Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
KS B ISO 8178-9-2010 Reciprocating interal combustion engines-- Exhaust emission measurement--Part 9: Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
KS R ISO 8178-9:2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 9: Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition eng

RU-GOST R, Ultra-low emission of flue gas and exhaust gas

GOST R 17.2.2.07-2000 Nature protection. Atmosphere. Engines for minitractors and minimecanical objects. Rates and testing methods of exhaust emission and smoke
GOST ISO 8178-9-2014 Reciprocating internal combustion engines. Exhaust emission measurement. Part 9. Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
GOST ISO 8178-10-2014 Reciprocating internal combustion engines. Exhaust emission measurement. Part 10. Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
GOST ISO 8178-3-2014 Internal combustion reciprocating engines. Exhaust emission measurement. Part 3. Definitions and methods of measurement of exhaust gas smoke under steady-state conditions

Zhejiang Provincial Standard of the People's Republic of China, Ultra-low emission of flue gas and exhaust gas

DB33/T 2167-2018 Technical specification for low-concentration emission monitoring of waste gas from stationary pollution sources in coal-fired power plants

Liaoning Provincial Standard of the People's Republic of China, Ultra-low emission of flue gas and exhaust gas

DB21/T 3793-2023 Technical Specifications for Low Concentration Emission Monitoring of Stationary Pollution Source Exhaust Gas from Coal-fired Power Plants in Liaoning Province

RO-ASRO, Ultra-low emission of flue gas and exhaust gas

STAS SR ISO 8178-3:1996 Reciprocating internai combustion engines - Exhaust emission measurement - Part 3: Definitions and methods of measure-ment of exhaust gas smoke under steady-state conditions

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Ultra-low emission of flue gas and exhaust gas

GB 3847-2005 Limits and measurement methods for exhaust smoke from C.I.E. (Compression Ignition Engine) and vehicle equiped with C.I.E.

KR-KS, Ultra-low emission of flue gas and exhaust gas

KS R ISO 8178-9-2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 9: Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition eng
KS I ISO 23210-2017 Stationary source emissions－Determination of PM10/PM2.5 mass concentration in flue gas－Measurement at low concentrations by use of impactors