ZH
RU
ES

Exhaust gas ultra-low emission

Exhaust gas ultra-low emission, Total:449 items.

In the international standard classification, Exhaust gas ultra-low emission involves: Construction materials, Air quality, Internal combustion engines, Gas and steam turbines. Steam engines, Fuels, Vocabularies, Energy and heat transfer engineering in general, Internal combustion engines for road vehicles, Pipeline components and pipelines, Wastes, Products of the textile industry, Environmental protection, Software development and system documentation, Road vehicles in general, Domestic, commercial and industrial heating appliances, Motor cycles and mopeds, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Rubber and plastics products, Installations in buildings, Diagnostic, maintenance and test equipment, Electric road vehicles, Farming and forestry, Floor treatment appliances, Shipbuilding and marine structures in general, Water quality, Fluid storage devices, Valves, Railway engineering in general, Railway rolling stock, Radiation protection, Radiation measurements, Protection against dangerous goods, Metrology and measurement in general, Insulating materials, Ventilators. Fans. Air-conditioners, Acoustics and acoustic measurements, Passenger cars. Caravans and light trailers.

British Standards Institution (BSI), Exhaust gas ultra-low emission

BS ISO 11042-2:1996 Gas turbines. Exhaust gas emission. Automated emission monitoring
BS ISO 8178-1:2017 Reciprocating internal combustion engines. Exhaust emission measurement. Test-bed measurement systems of gaseous and particulate emissions
BS ISO 11042-2:1997 Gas turbines - Exhaust gas emission - Automated emission monitoring
BS ISO 11042-1:1996 Gas turbines. Exhaust gas emission. Measurement and evaluation
BS ISO 8178-2:2021 Tracked Changes. Reciprocating internal combustion engines. Exhaust emission measurement. Measurement of gaseous and particulate exhaust emissions under field conditions
BS ISO 8178-1:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions
21/30426008 DC BS ISO 8178-2. Reciprocating internal combustion engines. Exhaust emission measurement. Part 2. Measurement of gaseous and particulate exhaust emissions under field conditions
BS ISO 8178-1:2020 Reciprocating internal combustion engines. Exhaust emission measurement - Test-bed measurement systems of gaseous and particulate emissions
BS ISO 8178-3:1996 Reciprocating internal combustion engines - Exhaust emission measurement - Definitions and methods of measurement of exhaust gas smoke under steady state conditions
BS ISO 8178-3:1994 Reciprocating internal combustion engines - Exhaust emission measurement - Definitions and methods of measurement of exhaust gas smoke under steady state conditions
BS ISO 11042-1:1997 Gas turbines - Exhaust gas emission - Measurement and evaluation
BS ISO 8178-2:2009 Reciprocating internal combustion engines. Exhaust emission measurement. Measurement of gaseous and particulate exhaust emissions under field conditions
BS ISO 8178-2:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Measurement of gaseous and particulate exhaust emissions under field conditions
BS ISO 8178-5:2015 Reciprocating internal combustion engines. Exhaust emission measurement. Test fuels
BS ISO 8178-5:2009 Reciprocating internal combustion engines. Exhaust emission measurement. Test fuels
BS ISO 8178-5:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Test fuels
BS ISO 8178-11:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
BS ISO 8178-3:2019 Tracked Changes. Reciprocating internal combustion engines. Exhaust emission measurement. Test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using a filter type smoke meter
BS ISO 19449:2015 Mopeds. Measurement methods for gaseous exhaust emissions during inspection or maintenance
BS 6069-4.2:1991 Characterization of air quality - Stationary source emissions - Method for the determination of asbestos plant emissions by fibre count measurement
19/30395228 DC BS EN 16429. Stationary source emissions. Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere
BS ISO 8178-9:2019 Reciprocating internal combustion engines. Exhaust emission measurement - Test cycles and test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using an opacimeter
BS EN 16429:2021 Tracked Changes. Stationary source emissions. Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere
19/30387314 DC BS ISO 8178-1 AMD1. Reciprocating internal combustion engines. Exhaust emission measurement. Part 1. Test-bed measurement systems of gaseous and particulate emissions
BS ISO 17479:2013+A1:2020 Motorcycles. Measurement methods for gaseous exhaust emissions during inspection or maintenance
BS ISO 8178-5:2021 Tracked Changes. Reciprocating internal combustion engines. Exhaust emission measurement. Test fuels
BS ISO 8178-6:2018 Reciprocating internal combustion engines. Exhaust emission measurement - Report of measuring results and test
BS ISO 16183:2002 Heavy duty engines. Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
BS 6069 Sec.4.2:1991 Characterization of air quality. Stationary source emissions. Method for the determination of asbestos plant emissions by fibre count measurement
BS EN ISO 8178-6:2001 Reciprocating internal combustion engines - Exhaust emission measurement - Report of measuring results and tests
BS ISO 8178-6:2001 Reciprocating internal combustion engines. Exhaust emission measurement. Report of measuring results and test
BS ISO 8178-6:2000 Reciprocating internal combustion engines - Exhaust emission measurement - Report of measuring results and test
BS ISO 8178-8:2015 Tracked Changes. Reciprocating internal combustion engines. Exhaust emission measurement. Engine group determination
BS ISO 8178-8:1997 Reciprocating internal combustion engines - Exhaust emission measurement - Engine group determination
BS ISO 8178-7:1997 Reciprocating internal combustion engines - Exhaust emission measurement - Engine family determination
BS ISO 6460-1:2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - General test requirements
BS ISO 3929:2003 Road vehicles. Measurement methods for exhaust gas emissions during inspection or maintenance
BS ISO 8178-7:2015 Tracked Changes. Reciprocating internal combustion engines. Exhaust emission measurement. Engine family determination
BS ISO 6855-1:2012 Mopeds. Measurement method for gaseous exhaust emissions and fuel consumption. General test requirements
19/30392436 DC BS ISO 17479 AMD1. Motorcycles. Measurement methods for gaseous exhaust emissions during inspection or maintenance
19/30387221 DC BS ISO 8178-5. Reciprocating internal combustion engines. Exhaust emission measurement. Part 5. Test fuels
BS ISO 6460-3:2007+A2:2022 Motorcycles. Measurement method for gaseous exhaust emissions and fuel consumption - Fuel consumption measurement at a constant speed
BS ISO 6460-2:2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Test cycles and specific test conditions
BS ISO 6460-3:2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Fuel consumption measurement at a constant speed
BS ISO 23274-2:2012 Hybrid-electric road vehicles. Exhaust emissions and fuel consumption measurements. Externally chargeable vehicle
BS ISO 6460-2:2014 Motorcycles. Measurement method for gaseous exhaust emissions and fuel consumption. Test cycles and specific test conditions
BS ISO 23274-2:2021 Hybrid-electric road vehicles. Exhaust emissions and fuel consumption measurements. Externally chargeable vehicles
BS ISO 7967-12:2022 Tracked Changes. Reciprocating internal combustion engines. Vocabulary of components and systems. Exhaust emission control systems
DD ENV 13801-2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Thermoplastics. Recommended practice for installation
BS ISO 8178-4:2007 Reciprocating internal combustion engines - Exhaust emission measurement - Steady-state test cycles for different engine applications
BS ISO 23274-1:2013 Hybrid-electric road vehicles. Exhaust emissions and fuel consumption measurements. Non-externally chargeable vehicles
BS ISO 6460-1:2022 Tracked Changes. Motorcycles. Measurement method for gaseous exhaust emissions and fuel consumption. General test requirements
BS ISO 8178-9:2001 Reciprocating internal combustion engines - Exhaust emission measurement - Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transi ent conditions
BS ISO 8178-9:2012 Reciprocating internal combustion engines. Exhaust emission measurement. Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
BS ISO 23274-1:2019 Hybrid-electric road vehicles. Exhaust emissions and fuel consumption measurements - Non-externally chargeable vehicles
DD ENV 1451-2-2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP). Guidance for the assessment of conformity
DD ENV 1519-2-2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylene (PE). Guidance for the assessment of conformity
BS ISO 25597:2013 Stationary source emissions. Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution
BS 7655-6.1:1997 Specification for insulating and sheathing materials for cables - Thermoplastic sheathing compounds having low emission of corrosive gases, and suitable for use in cables having low emission of smoke when affected by fire - General application thermoplast
BS ISO 8178-4:2020 Reciprocating internal combustion engines. Exhaust emission measurement - Steady-state and transient test cycles for different engine applications
BS ISO 6855-3:2012 Mopeds. Measurement method for gaseous exhaust emissions and fuel consumption. Fuel consumption measurement at a constant speed
21/30434480 DC BS ISO 7967-12. Reciprocating internal combustion engines. Vocabulary of components and systems. Part 12. Exhaust emission control systems
BS EN 1093-6+A1:1999 Safety of machinery. Evaluation of the emission of airborne hazardous substances. Separation efficiency by mass, unducted outlet
BS EN 1093-6:1998+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 6: Separation efficiency by mass, unducted outlet
BS ISO 20264:2019 Stationary source emissions. Determination of the mass concentration of individual volatile organic compounds (VOCs) in waste gases from non-combustion processes
21/30384598 DC BS ISO 6460-1. Motorcycles. Measurement method for gaseous exhaust emissions and fuel consumption. Part 1. General test requirements
BS ISO 19220:2021 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings. Styrene copolymer blends (SAN + PVC)
PD CEN/TS 1451-2:2019 Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP). Guidance for the assessment of conformity
BS EN ISO 13255:2017 Thermoplastics piping systems for soil and waste discharge inside buildings. Test method for airtightness of joints
BS EN 1519-1:2000 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylene (PE). Specifications for pipes, fittings and the system
BS EN 1451-1:2000 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP). Specifications for pipes, fittings and the system
20/30419419 DC BS ISO 19220. Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings. Styrene copolymer blends (SAN + PVC)
22/30451104 DC BS ISO 6460-3:2007 AMD2. Motorcycles. Measurement method for gaseous exhaust emissions and fuel consumption - Part 3. Fuel consumption measurement at a constant speed
BS EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors
DD ENV 1329-2-2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for the assessment of conformity
BS EN 1451-1:2017 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP) - Specifications for pipes, fittings and the system

Group Standards of the People's Republic of China, Exhaust gas ultra-low emission

T/CCAS 022-2022 Ultra-low emission standard of air pollutants for cement industry
T/CSES 25-2021 Granular coal based activated carbon for ultra low emission of flue gas from iron and steel industry
T/CECA-G 0023-2019 Acceptance requirements for comprehensive energy consumption of coal-fired industrial boilers with ultra-low emission of flue gas
T/CSES 09-2020 Specification for verification for air pollutants ultra-low emission technologies of coal-fired power plants
T/CNITA 05105-2021 Specification for filter bags for ultra-low emissions of industrial dust
T/SHDSGY 163-2022 Cable combustion laboratory exhauste mission standards
T/SDJHXH 001-2022 Coking Industry Ultra-Low Emission Assessment and Monitoring Technical Guidelines
T/CSEE 0290-2022 Technical Guidelines for Post-Evaluation of Ultra-Low Emission Projects in Coal-fired Power Plants
T/QGCML 729-2023 Laboratory waste gas collection and treatment discharge technical regulations
T/JSEE 019-2020 Coal-fired power plant ultra-low emission monitoring system integration technical guidelines
T/SDEPI 026-2022 Guidelines for Acceptance of Power Consumption Monitoring System for Exhaust Emission Units
T/ACEF 002-2020 Technical specification for on-line monitoring of odor emitted from stationary sources
T/SDEPI 024-2022 Technical Guidelines for the Construction of Power Consumption Monitoring System for Exhaust Gas Emission Units
T/CAEPI 46-2022 Specifications for monitoring point setting of stationary source emission point
T/CAEPI 35-2021 Technical Guidelines for Data Acquisition Monitoring of Exhaust Gas Emission Process (Working Condition) in Catering Industry
T/GDC 143-2022 Fugitive emissions—Determination of volatile organic compounds metal oxide method
T/SDAS 209-2020 Technical specifications for waste gas emission during the fermentation process of harmless treatment of breeding manure
T/AHEPI 0001-2023 Technical guide for space - air - ground integration hyperspectral remote sensing traceability of trace gases emissions
T/BAEE 005-2020 Calculation method for reducing carbon dioxide emissions based on supergaseous electronium flow technology
T/SXCAA 017-2022 Guidelines for the Construction and Operation of Remote Quality Control System for Continuous Monitoring Equipment of Exhaust Gas Emissions from Stationary Pollution Sources

Hebei Provincial Standard of the People's Republic of China, Exhaust gas ultra-low emission

DB13/ 2169-2018 Ultra-low emission standards for air pollutants in the iron and steel industry
DB13/ 2167-2020 Ultra-low emission standards for air pollutants in the cement industry
DB13/ 2863-2018 Ultra-low emission standards for air pollutants in the coking chemical industry
DB13/ 2168-2020 Ultra-low emission standards for air pollutants in the flat glass industry
DB13/T 2583-2017 Test method for exhaust gas emission from civil clean combustion stoves
DB13/T 2782-2018 General Technical Specifications for Delayed Continuous Monitoring System of Ultra-low Emission Stationary Pollution Sources

RU-GOST R, Exhaust gas ultra-low emission

GOST R 52408-2005 Reciprocating internal combustion engines. Exhaust emission. Part 2. Measurement of exhaust emission at site
GOST R 52408-2014 Reciprocating internal combustion engines. Exhaust emission and visible pollutants. Measurement of exhaust emission at site
GOST R ISO 11042-1-2001 Gas turbines. Methods of exhaust gas emission determinations
GOST ISO 8178-11-2015 Reciprocating internal combustion engines. Exhaust emission measurement. Part 11. Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
GOST R 51249-1999 Internal combustion reciprocating engines. Emissions of harmful substances with the exhaust gases. Limit values and test methods
GOST R 50953-2008 Emission of the exhaust gas pollutants by the main-line and shunting diesel locomotives. Norms and determination methods
GOST R 50953-1996 Emission of the exhaust gas pollutants by the main line and shunting diesel locomotives. Norms and determination methods
GOST 31967-2012 Internal combustion reciprocating engines. Emissions of harmful substances with the exhaust gases. Limit values and test methods
GOST R 17.2.2.07-2000 Nature protection. Atmosphere. Engines for minitractors and minimecanical objects. Rates and testing methods of exhaust emission and smoke
GOST R 54129-2010 Emission of the exhaust gas pollutants by the main-line and shunting for the special-purpose rolling stock. Norms and determination methods
GOST R ISO 23274-2013 Hybrid-electric road vehicles. Exhaust emissions and fuel consumption measurements. Non-externally chargeable vehicles
GOST 8.615-2013 State system for ensuring the traceability of measurements. Instruments for measuring vehicle exhaust emissions. Verification procedure
GOST ISO 8178-9-2014 Reciprocating internal combustion engines. Exhaust emission measurement. Part 9. Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
GOST ISO 8178-10-2014 Reciprocating internal combustion engines. Exhaust emission measurement. Part 10. Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
GOST 32210-2013 Emission of the exhaust gas pollutants by the main-line and shunting of the special-purpose railway rolling stock. Norms and determination methods
GOST ISO 8178-3-2014 Internal combustion reciprocating engines. Exhaust emission measurement. Part 3. Definitions and methods of measurement of exhaust gas smoke under steady-state conditions
GOST R 52033-2003 Motor vehicles with petrol engines. Emission of the exhaust gas pollutants. Norms and methods of the control for estimation of technical condition
GOST R 54942-2012 Gas fuel motor vehicles with spark ignition engines. Emission of the exhaust gas pollutants. Norms and methods of the control for estimation of technical condition

CZ-CSN, Exhaust gas ultra-low emission

CSN IEC 761-6:1993 Equipment for continuously monitoring radioactivity in gaseous effluents. Part 6: Specific requirements for transuranic aerosol effluent monitors
CSN IEC 761-3:1993 Equipment for continuously monitoring radioactivity in gaseous effluents. Part 3: Specific requirements for noble gas effluent monitors
CSN IEC 761-2:1992 Equipment for continuously monitoring radioactivity in gaseous effluents Part 2: Specific requirements for aerosol effluent monitors
CSN IEC 761-1:1992 Equipment for continuously monitoring radioactivity in gaseous effluents Part 1: General requirements
CSN IEC 761-5:1993 Equipment for continuously monitoring radioactivity in gaseous effluents Part 5: Specific requirements for tritium effluent monitors
CSN IEC 761-4:1993 Equipment for continuously monitoring radioactivity in gaseous effluents. Part 4: Sepcific requirements for iodine monitors
CSN IEC 60761-2 ZZ1:2005
CSN 34 7470-13 ZZ1-2000

Association Francaise de Normalisation, Exhaust gas ultra-low emission

NF E37-504-2*NF ISO 11042-2:2016 Gaz turbines - Exhaust gas emission - Part 2 : automated emission monitoring
NF R10-019*NF ISO 3930:2001 Instruments for measuring vehicle exhaust emissions
NF J95-067*NF EN ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measutrement - Test-bed measurement of gaseous and particulate exhaust emissions
NF E37-504-2:1999 Gas turbines - Exhaust gas emission - Part 2 : automated emission monitoring.
NF E37-211-2*NF ISO 8178-2:2022 Reciprocating internal combustion engines - Exhaust emission measurement - Part 2 : measurement of gaseous and particulate exhaust emissions under field conditions
NF E37-211-1:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1 : test-bed measurement of gaseous and particulate exhaust emissions.
NF E37-211-1:1997 Reciprocating internal combustion engines. Exhaust emission measurement. Part 1 : test-bed measurement of gaseous and particulate exhaust emissions.
NF ISO 8178-2:2022 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 2 : mesurage des émissions de gaz et de particules sur site
NF E37-504-1:1999 Gas turbines - Exhaust gas emission - Part 1 : measurement and evaluation.
NF E37-504-1*NF ISO 11042-1:2016 Gaz turbines - Exhaust gas emission - Part 1 : measurement and evaluation
NF E37-211-2:1996 Reciprocating internal combustion engines. Exhaust emission measurement. Part 2 : measurement of gaseous and particulate exhaust emissions at site.
NF ISO 8178-1:2020 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 1 : mesurage des émissions de gaz et de particules au banc d'essai
NF ISO 8178-9:2019 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 9 : cycles et procédures d'essai pour le mesurage au banc d'essai des émissions de fumées de gaz d'échappement des moteurs alternatifs à combust...
NF X43-134*NF EN 16429:2021 Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere
NF E37-211-5:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Part 5 : test fuels.
NF E37-211-1*NF ISO 8178-1:2020 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1 : test-bed measurement systems of gaseous and particulate emissions
NF EN ISO 23210:2009 Émissions de sources fixes - Détermination de la concentration en masse de PM10/PM2,5 dans les effluents gazeux - Mesurage à des faibles concentrations au moyen d'impacteurs
NF E37-211-2:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Part 2 : measurement of gaseous and particulate exhaust emissions under field conditions.
NF E37-211-9*NF ISO 8178-9:2019 Reciprocating internal combustion engines - Exhaust emission measurement - Part 9 : test cycles and test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using an opacimeter
NF E37-211-5:1997 Reciprocating internal combustion engines. Exhaust emission measurement. Part 5 : test fuels.
NF E37-211-5*NF ISO 8178-5:2021 Reciprocating internal combustion engines - Exhaust emission measurement - Part 5 : test fuels
NF X43-317:2011 Émissions de sources fixes - Détermination de l'indice de pollution acide ou alcaline des effluents gazeux
NF ISO 8178-5:2021 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 5 : carburants d'essai
NF R10-018*NF ISO 3929:2004 Road vehicles - Measurement methods for exhaust gas emissions during inspection or maintenance
NF R10-018:1996 Road vehicles. Measurement procedures for exhaust gas emissions during inspection or maintenance.
NF ISO 8178-3:2019 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 3 : définitions et méthodes de mesure de la fumée des gaz d'échappement dans des conditions stabilisées
NF E37-211-8*NF ISO 8178-8:2015 Reciprocating internal combustion engines - Exhaust emission measurement - Part 8 : engine group determination
NF E37-211-7*NF ISO 8178-7:2015 Reciprocating internal combustion engines - Exhaust emission measurement - Part 7 : engine family determination
NF ISO 8178-6:2018 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 6 : rapport de mesure et d'essai
NF ISO 8178-8:2015 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 8 : détermination des groupes de moteurs
NF D35-372*NF EN 1266:2003 Independent gas-fired convection heaters incorporating a fan to assist transportation of combustion air and/or flue gases.
NF D35-372/A1*NF EN 1266/A1:2005 Independent gas-fired convection heaters incorporating a fan to assist transportation of combustion air and/or flue gases
NF E37-211-6:2010 Reciprocating internal combustion engines - Exhaust emission measurement - Part 6 : report of measuring results and test.
NF E37-002-12*NF ISO 7967-12:2015 Reciprocating internal combustion engines - Vocabulary of components and systems - Part 12 : exhaust emission control systems
NF E37-211-6*NF ISO 8178-6:2018 Reciprocating internal combustion engines - Exhaust emission measurement - Part 6 : report of measuring results and test
NF ISO 8178-7:2015 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 7 : détermination des familles de moteurs
NF ISO 7967-12:2022 Moteurs alternatifs à combustion interne - Vocabulaire des composants et des systèmes - Partie 12 : systèmes de contrôle des émissions de gaz d'échappement
NF R10-019:1996 Road vehicles. Measurement equipment for exhaust gas emissions during inspection or maintenance. Technical specifications.
NF F37-040:1977 Railway transport equipment. Tank wagons for carrying liquified gases under pressure and having bottom filling and emptying devices. Maximum service pressure 40 bars. Air orifice for gauging, degassing and testing.
NF R10-025-3:2016 Véhicules routiers - Mesurage de l'opacité des gaz d'échappement émis par les moteurs à allumage par compression (diesel) - Partie 3 : procédure de contrôle des polluants visibles (opacité) des gaz d'échappement
NF E37-211-4:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Part 4 : steady-state test cycles for different engine applications.
NF E37-211-4:1996 Reciprocating internal combustion engines. Exhaust emission measurement. Part 4 : test cycles for different engine applications.
NF T54-902*NF EN ISO 13255:2017 Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints
NF E37-211-9:2012 Reciprocating internal combustion engines - Exhaust emission measurement - Part 9: test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
NF E37-211-10:2003 Reciprocating internal combustion engines - Exhaust emission measurement - Part 10 : test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions.
NF ISO 13271:2012 Émissions de sources fixes - Détermination de la concentration en masse de PM10/PM2,5 dans les effluents gazeux - Mesurage à des hautes concentrations à l'aide des impacteurs virtuels
NF ISO 14396:2002 Moteurs alternatifs à combustion interne - Détermination et méthode de mesurage de la puissance - Exigences supplémentaires pour les essais d'émissions de gaz d'échappement suivant l'ISO 8178
NF E31-360-2*NF EN 15036-2:2007 Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 2 : flue gas noise emissions at the outlet of the heat generator.
NF E37-211-4*NF ISO 8178-4:2020 Reciprocating internal combustion engines - Exhaust emission measurement - Part 4 : steady-state and transient test cycles for different engine applications
NF ISO 8178-4:2020 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 4 : cycles d'essai en régimes permanent et transitoire pour différentes applications des moteurs
NF DTU 60.5 P1-1:2008 Travaux de bâtiment - Canalisations en cuivre - Distribution d'eau froide et chaude sanitaire, évacuation d'eaux usées, d'eaux pluviales, installations de génie climatique - Partie 1-1 : cahier des clauses techniques

Korean Agency for Technology and Standards (KATS), Exhaust gas ultra-low emission

KS B ISO 11042-2-2015(2020) Gas turbines — Exhaust gas emission — Part 2: Automated emission monitoring
KS B ISO 11042-2:2005 Gas turbines-Exhaust gas emission-Part 2:Automated emission monitoring
KS B ISO 11042-2:2015 Gas turbines — Exhaust gas emission — Part 2: Automated emission monitoring
KS R ISO 8178-1:2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
KS R ISO 8178-2:2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
KS B ISO 11042-1:2015 Gas turbines — Exhaust gas emission — Part 1: Measurement and evaluation
KS B ISO 11042-1:2005 Gas turbines-Exhaust gas emission-Part 1:Measurement and evaluation
KS B ISO 11042-1-2015(2020) Gas turbines — Exhaust gas emission — Part 1: Measurement and evaluation
KS B ISO 8178-11:2008 Reciprocating internal combustion engines－Exhaust emission measurement－Part 11：Test bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
KS R 1046-2001(2011) Road vehicles?Measurement methods for exhaust gasemissions during inspection or maintenance
KS R ISO 16185-2006(2016) Road vehicles－Engine families for certification ofheavy－duty vehicles－Exhaust emissions
KS R ISO 16185-2006(2021) Road vehicles－Engine families for certification ofheavy－duty vehicles－Exhaust emissions
KS R ISO 3929-2006(2021) Road vehicles－Measurement methods for exhaust gas emissions during inspection or maintenance
KS R ISO 3929-2006(2016) Road vehicles－Measurement methods for exhaust gas emissions during inspection or maintenance
KS R ISO 8178-3-2007(2022) Reciprocating internal combustion engines－Exhaust emission measurement－Part 3：Definitions and methods of measurement of exhaust gas smoke under steady-state conditions
KS R ISO 3929:2006 Road vehicles－Measurement methods for exhaust gas emissions during inspection or maintenance
KS R ISO 8178-8:2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 8: Engine group determination
KS R ISO 8178-7:2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 7: Engine family determination
KS R ISO 8178-6:2020 Reciprocating internal combustion engines — Exhaust emission measurement — Part 6: Report of measuring results and test
KS M ISO 3633:2012 Plastics piping systems for soil and waste discharge(low and high temperature) inside buildings－Unplasticized poly(vinyl chloride) (PVC-U)
KS R ISO 8178-9:2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 9: Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition eng
KS M ISO 7682:2009 Plastics piping systems for soil and waste discharge(low and high temperature) inside buildings－Acrylonitrile-butadiene-styrene(ABS)
KS R 0122-2018 Road vehicles — Exhaust emissions and fuel consumption measurements for externally chargeable hybrid electric vehicles
KS M ISO 3633-2012(2022) Plastics piping systems for soil and waste discharge(low and high temperature) inside buildings－Unplasticized poly(vinyl chloride) (PVC-U)
KS M ISO 3633-2012(2017) Plastics piping systems for soil and waste discharge(low and high temperature) inside buildings－Unplasticized poly(vinyl chloride) (PVC-U)
KS M ISO 7682:2019 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Acrylonitrile-butadiene-styrene(ABS)
KS R 1021-2005 Analytical procedure for continuous measurement of carbonmonoxide, carbon dioxide and hydrocarbon in automobile exhaust gas
KS R ISO PAS 3930:2014 Instruments for measuring vehicle exhaust emissions — Metrological and technical requirements; Metrological control and performance tests
KS R ISO 8178-4:2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 4: Steady-state test cycles for different engine applications

Japanese Industrial Standards Committee (JISC), Exhaust gas ultra-low emission

JIS B 8043-2:2000 Gas turbines -- Exhaust gas emission -- Part 2: Automated emission monitoring
JIS B 8008-2:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 2: Measurement of gaseous and particulate exhaust emissions at site
JIS B 8008-1:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
JIS B 8043-1:2000 Gas turbines -- Exhaust gas emission -- Part 1: Measurement and evaluation
JIS B 8008-1:2009 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 1: Test-bed measurement of gaseous and particulate emissions
JIS B 8008-1:2023 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 1: Test-bed measurement systems of gaseous and particulate emissions
JIS B 8008-11:2008 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 11: Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
JIS D 0108:1985 Glossary of terms relating to control of air pollutions from automobile emissions
JIS B 8008-2:2009 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
JIS B 8008-3:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 3: Definitions and methods of measurement of exhaust gas smoke under steady-state conditions
JIS B 8008-5:2009 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 5: Test fuels
JIS B 8008-5:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 5: Test fuels
JIS B 8008-6:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 6: Test report
JIS B 8008-7:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 7: Engine family determination
JIS B 8008-8:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 8: Engine group determination
JIS B 8008-9:2004 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
JIS D 1047-1:2017 Motorcycles -- Measurement method for gaseous exhaust emissions and fuel consumption -- Part 1: General test requirements
JIS B 8008-4:2009 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 4: Steady-state test cycles for different engine applications
JIS B 8008-4:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 4: Test cycles for different engine applications
JIS D 1047-2:2017 Motorcycles -- Measurement method for gaseous exhaust emissions and fuel consumption -- Part 2: Test cycles and specific test conditions
JIS B 8008-4:2023 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 4: Steady-state and transient test cycles for different engine applications
JIS D 1047-3:2017 Motorcycles -- Measurement method for gaseous exhaust emissions and fuel consumption -- Part 3: Fuel consumption measurement at a constant speed

未注明发布机构, Exhaust gas ultra-low emission

BS ISO 11042-2:1996(2000) Gas turbines — Exhaust gas emission — Part 2 : Automated emission monitoring
DIN EN ISO 8178-1:1996 Reciprocating internal combustion engines, Exhaust emission measurement — Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
BS ISO 11042-1:1996(2000) Gas turbines — Exhaust gas emission — Part 1 : Measurement and evaluation
BS ISO 8178-10:2002(2003) Reciprocating internal combustion engines — Exhaust emission measurement — Part 10 : Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
DIN EN ISO 8178-5:1999 Reciprocating internal combustion engines — Exhaust emission measurement — Part 5: Test fuels
BS ISO 16183:2002(2003) Heavy duty engines — Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
BS EN 60761-2:2004(2005) Equipment for continuous monitoring radioactivityingaseous effluents — Part 2 : Specific requirements for aerosol monitors including transuranic aerosols

Shandong Provincial Standard of the People's Republic of China, Exhaust gas ultra-low emission

DB37/T 2706-2015 Technical Specifications for Monitoring Low-concentration Exhaust Gases from Stationary Pollution Sources
DB37/ 006-1991 Discharge Standards of Waste Gas Pollutants in Shandong Province

Professional Standard - Environmental Protection, Exhaust gas ultra-low emission

HJ 2053-2018 Technical specifications for ultra-low emission flue gas treatment engineering in coal-fired power plants
HJBZ 19-1997 Energy-saving, low-emission gas cooker

International Organization for Standardization (ISO), Exhaust gas ultra-low emission

ISO 11042-2:1996 Gas turbines - Exhaust gas emission - Part 2: Automated emission monitoring
ISO 8178-1:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
ISO 8178-1:2017 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement systems of gaseous and particulate emissions
ISO 3930:2000 Instruments for measuring vehicle exhaust emissions
ISO 8178-2:2021 Reciprocating internal combustion engines — Exhaust emission measurement — Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
ISO 8178-2:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
ISO 11042-1:1996 Gas turbines - Exhaust gas emission - Part 1: Measurement and evaluation
ISO 8178-11:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Part 11: Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
ISO 8178-1:2020 Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement systems of gaseous and particulate emissions
ISO 8178-3:2019 Reciprocating internal combustion engines — Exhaust emission measurement — Part 3: Test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using a filter type
ISO 8178-9:2019 Reciprocating internal combustion engines — Exhaust emission measurement — Part 9: Test cycles and test procedures for measurement of exhaust gas smoke emissions from compression ignition engines usin
ISO 19449:2015 Mopeds — Measurement methods for gaseous exhaust emissions during inspection or maintenance
ISO 8178-5:2021 Reciprocating internal combustion engines — Exhaust emission measurement — Part 5: Test fuels
ISO 8770:2003 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polyethylene (PE)
ISO 7671:2003 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polypropylene (PP)
ISO 7675:2003 Plastic piping systems for soil and waste discharge (low and high temperature) inside buildings - Chlorinated poly(vinyl chloride) (PVC-C)
ISO 3929:2003 Road vehicles - Measurement methods for exhaust gas emissions during inspection or maintenance
ISO 3929:1995 Road vehicles - Measurement methods for exhaust gas emmissions during inspection or maintenance
ISO 8770:1991 High-density polyethylene (PE-HD) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings; specifications
ISO 7967-12:2022 Reciprocating internal combustion engines — Vocabulary of components and systems — Part 12: Exhaust emission control systems
ISO 3633:2002 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U)
ISO 7675:1991 Chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings; specifications
ISO 6460-1:2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 1: General test requirements
ISO 7682:2003 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Acrylonitrile-butadiene-styrene (ABS)
ISO 23274:2007 Hybrid-electric road vehicles - Exhaust emissions and fuel consumption measurements - Non-externally chargeable vehicles
ISO 6855-1:2012 Mopeds - Measurement method for gaseous exhaust emissions and fuel consumption - Part 1: General test requirements
ISO/TS 7024:2005 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Thermoplastics - Recommended practice for installation
ISO 19220:2004 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Styrene copolymer blends (SAN + PVC)
ISO 19220:2021 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Styrene copolymer blends (SAN + PVC)
ISO 6460-1:2007/Amd 1:2015 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 1: General test requirements; Amendment 1
ISO 23274-2:2012 Hybrid-electric road vehicles - Exhaust emissions and fuel consumption measurements - Part 2: Externally chargeable vehicles
ISO 23274-2:2021 Hybrid-electric road vehicles - Exhaust emissions and fuel consumption measurements - Part 2: Externally chargeable vehicles
ISO 7682:1991 Acrylonitrile/butadiene/styrene (ABS) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings — Specifications
ISO 6460-3:2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 3: Fuel consumption measurement at a constant speed
ISO 23274-1:2013 Hybrid-electric road vehicles - Exhaust emissions and fuel consumption measurements - Part 1: Non-externally chargeable vehicles
ISO 20264:2019 Stationary source emissions — Determination of the mass concentration of individual volatile organic compounds (VOCs) in waste gases from non-combustion processes
ISO 6460-2:2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions
ISO 23274-1:2019 Hybrid-electric road vehicles — Exhaust emissions and fuel consumption measurements — Part 1: Non-externally chargeable vehicles
ISO 6460-2:2014 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions
ISO 7671:1991 Polypropylene (PP) pipes and fittings (jointed by means of elastomeric sealing rings) for soil and waste discharge (low and high temperature) systems inside buildings; specifications
ISO 8178-4:2020 Reciprocating internal combustion engines — Exhaust emission measurement — Part 4: Steady-state and transient test cycles for different engine applications
ISO 6855-2:2012 Mopeds - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions

API - American Petroleum Institute, Exhaust gas ultra-low emission

API PUBL 841-44700-1988 EXHAUST BENZENE EMISSIONS FROM LATE MODEL VEHICLES
API PUBL 4603-1994 Investigation of MOBILE5a Emission Factors: Assessment of Exhaust and Nonexhaust Emission Factor Methodologies and Oxygenate Effects
API PUBL 4680-1998 Amine Unit Air Emissions Model Evaluation
API PUBL 4470 VOL II-1988 Exhaust Benzene Emissions from Late Model Vehicles (Volume II)
API PUBL 931 C14-1976 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS CHAPTER 14 - WASTE GASES AND INCINERATION
API PUBL 931 C7-1976 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS Chapter 7 - Hydrocarbon Emissions
API PUBL 931-1975 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS AND VOLUME ON LIQUID WASTES
API PUBL 931 C9-1977 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS CHAPTER 9-SOURCES AND CONTROLS FOR EMISSIONS OF NITROGEN OXIDES
API PUBL 931 C15-1977 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS CHAPTER 15-FLARES
API ATMOSPHERIC EMISSIONS-1980 ATMOSPHERIC EMISSIONS FROM OILY WASTE LANDSPREADING - FINAL REPORT
API PUBL 931 C1-1975 MANUAL ON DIPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS Chapter 1 - Introduction
API PUBL 931 C16-1976 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS - CHAPTER 16-ODOR
API PUBL 931 C4-1974 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS - CHAPTER 4-GAS FLOW MEASUREMENT METHODS
API PUBL 931 C11-1975 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS - CHAPTER 11-CYCLONE SEPARATORS
API PUBL 931 C8-1976 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS CHAPTER 8-SULFER/SULFER COMPOUNDS
API PUBL 931 C12-1974 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS CHAPTER 12 - ELECTROSTATIC PRECIPITATORS
API 4238- STUDY OF ULTRASONIC VORTEX EFFECT AND TRACER GAS METHOD ON MEASUREMENT OF AUTOMOTIVE MASS EMISSIONS
API PUBL 931 C5-1976 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS CHAPTER 5-SAMPLING AND SURVEYS
API PUBL 931 C17-1974 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS - CHAPTER 17-NOISE
API PUBL 4518-1990 Measurement of BTEX Emission Fluxes from Refinery Wastewater Impoundments Using Atmospheric Tracer Techniques
API PUBL 4436-1986 Study of the Effects of Gasoline Reid Vapor Pressure (RVP) on the Evaporative and Exhaust Emissions from In-Use Automobiles Phase II (Withdrawn)
API PUBL 931 C2-1977 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS - CHAPTER 2 PROPERTIES AND SOURCES OF AIR POLLUTANTS FROM REFINERIES
API 4124-1972 EFFECTS OF GASOLINE ADDITIVES ON CARBURETOR AND PCV SYSTEM PERFORMANCE AS THEY RELATE TO EXHAUST EMISSIONS
API 4056-1972 EFFECTS OF GASOLINE ADDITIVES ON CARBURETOR AND PCV SYSTEM PERFORMANCE AS THEY RELATE TO EXHAUST EMISSIONS
API 4056-1970 EFFECTS OF GASOLINE ADDITIVES ON CARBURETOR AND PCV SYSTEM PERFORMANCE AS THEY RELATE TO EXHAUST EMISSIONS
API 4204-1973 A STUDY OF MANDATORY ENGINE MAINTENANCE FOR REDUCING VEHICLE EXHAUST EMISSIONS VOLUME II. MANDATORY INSPECTION/MAINTENANCE SYSTEMS STUDY
API PUBL 931 C13-1974 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS - CHAPTER 13-FILTERS AND WET COLLECTORS FOR THE REMOVAL OF PARTICULATE MATTER

KR-KS, Exhaust gas ultra-low emission

KS R ISO 8178-1-2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
KS R ISO 8178-2-2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
KS R ISO 8178-8-2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 8: Engine group determination
KS R ISO 8178-7-2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 7: Engine family determination
KS R ISO 8178-6-2020 Reciprocating internal combustion engines — Exhaust emission measurement — Part 6: Report of measuring results and test
KS R ISO 8178-9-2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 9: Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition eng
KS M ISO 7682-2019 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Acrylonitrile-butadiene-styrene(ABS)
KS R ISO PAS 3930-2014 Instruments for measuring vehicle exhaust emissions — Metrological and technical requirements; Metrological control and performance tests
KS R ISO 8178-4-2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 4: Steady-state test cycles for different engine applications
KS I ISO 23210-2017 Stationary source emissions－Determination of PM10/PM2.5 mass concentration in flue gas－Measurement at low concentrations by use of impactors

Society of Automotive Engineers (SAE), Exhaust gas ultra-low emission

SAE J254-1993 Instrumentation and Techniques for Exhaust Gas Emissions measurement
SAE J254-2011 Instrumentation and Techniques for Exhaust Gas Emissions measurement
SAE J1094-2011 Constant Volume Sampler System for Exhaust Emissions measurement
SAE J1094A-1978 CONSTANT VOLUME SAMPLER SYSTEM FOR EXHAUST EMISSIONS MEASUREMENT
SAE J1094-1992 Constant Volume Sampler System for Exhaust Emissions Measurement, Information Report June 1992
SAE J1711-1999 Recommended Practice for Measuring the Exhaust Emissions and Fuel Economy of Hybrid-Electric Vehicles
SAE J1088-1993 (R) Test Procedure for the Measurement of Gaseous Exhaust Emissions from Small Utility Engines, Recommended Practice February 1993
SAE AIR1312-2002 EXHAUST EMISSION LIMITS FOR DIESEL ENGINES USED IN AIRCRAFT GROUND SUPPORT EQUIPMENT AT AIRPORT ENVIRONMENTS
SAE J1711-2023 Recommended Practice for Measuring the Exhaust Emissions and Fuel Economy of Hybrid-Electric Vehicles, Including Plug-in Hybrid Vehicles

SAE - SAE International, Exhaust gas ultra-low emission

SAE J254-1971 INSTRUMENTATION AND TECHNIQUES FOR EXHAUST GAS EMISSIONS MEASUREMENT
SAE J254-1984 Instrumentation and Techniques for Exhaust Gas Emissions Measurement
SAE J1088-2013 Test Procedure for the Measurement of Gaseous Exhaust Emissions from Small Utility Engines
SAE J1088-1983 Test Procedure for the Measurement of Exhaust Emissions from Small Utility Engines
SAE AIR1312-1975 EXHAUST EMISSION LIMITS FOR DIESEL ENGINES USED IN AIRCRAFT GROUND SUPPORT EQUIPMENT AT AIRPORT ENVIRONMENTS

ES-UNE, Exhaust gas ultra-low emission

UNE-EN ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015)
UNE-EN 16429:2021 Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere
UNE-EN 60761-2:2004 Equipment for continuous monitoring radioactivity in gaseous effluents -- Part 2: Specific requirements for aerosols monitors including transuranic aerosols (Endorsed by AENOR in March of 2005.)
UNE-EN ISO 13255:2018 Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints (ISO 13255:2010)

German Institute for Standardization, Exhaust gas ultra-low emission

DIN EN ISO 18854:2015-08 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015); German version EN ISO 18854:2015
DIN EN ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015)
DIN EN 16429:2020 Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere; German and English version prEN 16429:2019
DIN EN 16429:2021-05 Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere; German version EN 16429:2021
DIN EN 16429:2021 Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere; German version EN 16429:2021
DIN 38402-6:1991 German standard methods for the examination of water, waste water and sludge; general information (group A); assessment of the minimum frequency for controlling water constituents in discharges (emission strategy) (A 6)
DIN EN 13648-3:2003 Cryogenic vessels - Safety devices for protection against excessive pressure - Part 3: Determination of required discharge; Capacity and sizing; German version EN 13648-3:2002
DIN EN 12619:2013 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method; German version EN 12619:2013
DIN V ENV 13801:2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation; German version ENV 13801:2001
DIN EN ISO 13255:2018-01 Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints (ISO 13255:2010); German version EN ISO 13255:2017
DIN EN 60761-2:2005 Equipment for continuous monitoring radioactivity in gaseous effluents - Part 2: Specific requirements for aerosols monitors including transuranic aerosols (IEC 60761-2:2002, modified); German version EN 60761-2:2004
DIN EN ISO 23210:2009-12 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009); German version EN ISO 23210:2009
DIN EN ISO 13255:2018 Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints (ISO 13255:2010)
DIN CEN/TS 1519-2:2012 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 1519-2:2012
DIN CEN/TR 13801:2014-07*DIN SPEC 19637:2014-07 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation; German version CEN/TR 13801:2014

GB-REG, Exhaust gas ultra-low emission

REG 14 CFR PART 34-2012 Fuel venting and exhaust emission requirements for turbine engine powered airplanes
REG 40 CFR PART 600-2011 FUEL ECONOMY AND CARBON-RELATED EXHAUST EMISSIONS OF MOTOR VEHICLES

US-FCR, Exhaust gas ultra-low emission

FCR UFGS-23 35 00.00 10-2009 OVERHEAD VEHICLE TAILPIPE [AND WELDING FUME] EXHAUST REMOVAL SYSTEM(S)

American National Standards Institute （ANSI), Exhaust gas ultra-low emission

ANSI/SAE J254-1993 Instrumentation and Techniques for Exhaust Gas Emissions Measurement
ANSI/ASTM F2826:2014 Standard Test Method for Evaluating the Sustained Air Performance and Exhaust Emission Efficiencies of Central Vacuum Cleaning Units

Indonesia Standards, Exhaust gas ultra-low emission

Standard Association of Australia （SAA）, Exhaust gas ultra-low emission

AS 2237:1979 Plastics fuel and emission control tube
AS 3761:1990 Vehicle exhaust system surface temperatures
AS/NZS 4013:1999 Domestic solid fuel burning appliances - Method for determination of flue gas emission
AS/NZS 7671:2010

Zhejiang Provincial Standard of the People's Republic of China, Exhaust gas ultra-low emission

DB33/T 2167-2018 Technical specification for low-concentration emission monitoring of waste gas from stationary pollution sources in coal-fired power plants

American Society of Mechanical Engineers (ASME), Exhaust gas ultra-low emission

ASME B133.9-1994 Measurement of exhaust emissions from stationary gas turbine engines
ASME B133.9-1994(R2001) Measurement of Exhaust Emissions from Stationary Gas Turbine Engines

VN-TCVN, Exhaust gas ultra-low emission

TCVN 6438-2005 Road vehicles.Maximum permitted emission limits of exhaust gases
TCVN 6503-1-1999 Gas turbines.Exhaust gas emission.Part 1: Measurement and evaluation
TCVN 6204-2008 Road vehicles.Measurement methods for exhaust gas emissions during inspection or maintenance
TCVN 6440-1-2009 Motorcycles.Measurement method for gaseous exhaust emissions and fuel consumption.Part 1: General test requirements
TCVN 6440-3-2009 Motorcycles.Measurement method for gaseous exhaust emissions and fuel consumption.Part 3: Fuel consumption measurement at a constant speed
TCVN 6440-2-2009 Motorcycles.Measurement method for gaseous exhaust emissions and fuel consumption.Part 2: Test cycles and specific test conditions

IX-UIC, Exhaust gas ultra-low emission

UIC O 624-2012 Exhaust emission tests for diesel traction engines

Federal Aviation Administration (FAA), Exhaust gas ultra-low emission

FAA 14 CFR PART 34-2011 Fuel venting and exhaust emission requirements for turbine engine powered airplanes

Liaoning Provincial Standard of the People's Republic of China, Exhaust gas ultra-low emission

DB21/T 3793-2023 Technical Specifications for Low Concentration Emission Monitoring of Stationary Pollution Source Exhaust Gas from Coal-fired Power Plants in Liaoning Province

Shanghai Provincial Standard of the People's Republic of China, Exhaust gas ultra-low emission

DB31/ 767-2013 Air Pollutant Emission Standards for Hazardous Waste Incineration

Beijing Provincial Standard of the People's Republic of China, Exhaust gas ultra-low emission

DB11/ 503-2007 Air Pollutant Emission Standards for Hazardous Waste Incineration

Danish Standards Foundation, Exhaust gas ultra-low emission

DS/EN 16429:2021 Stationary source emissions – Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere
DS/ISO 17479:2013 Motorcycles - Measurement methods for gaseous exhaust emissions during inspection or maintenance
DS/ISO 23274-2:2021 Hybrid-electric road vehicles – Exhaust emissions and fuel consumption measurements – Part 2: Externally chargeable vehicles
DS/INSTA 220:2000 Pipes and fittings of unplasticized poly (vinyl chloride) (PVC-U) for soil and waste discharge (low and high temperature) within the building structure
DS/ISO 23274-2:2012 Hybrid-electric road vehicles - Exhaust emissions and fuel consumption measurements - Part 2: Externally chargeable vehicles
DS/ISO 6855-1:2012 Mopeds - Measurement method for gaseous exhaust emissions and fuel consumption - Part 1: General test requirements
DS/ISO 19220:2021 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings – Styrene copolymer blends (SAN + PVC)
DS/ISO 23274-1:2013 Hybrid-electric road vehicles - Exhaust emissions and fuel consumption measurements - Part 1: Non-externally chargeable vehicles
DS/ENV 13801:2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation
DS/ISO 6855-2:2012 Mopeds - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions
DS/ISO 6855-3:2012 Mopeds - Measurement method for gaseous exhaust emissions and fuel consumption - Part 3: Fuel consumption measurement at a constant speed

Association of German Mechanical Engineers, Exhaust gas ultra-low emission

VDI 3481 Blatt 2-1998 Gaseous emission measurement - Determination of gaseous organic carbon in waste gases - Adsorption on silica gel
VDI 3862 Blatt 8-2015 Measurement of gaseous emissions - Measurement of formaldehyde in the exhaust gas of combustion engines - FTIR method
VDI 2462 Blatt 2-2011 Measurement of gaseous emissions - Determination of sulphur trioxide in water vapour containing exhaust gas - Condensation method
VDI 3475 Blatt 1-2003 Emission control - Biological waste treatment facilities - Composting and anaerobic digestion; Plant capacities more than approx. 6000 Mg/a
VDI 3863 Blatt 2-1991 Gaseous emission measurement; determination of acrylonitrile; gas chromatographic method; sampling by absorption in low temperature solvents
VDI 3861 Blatt 2-2008 Stationary source emissions - Measurement of inorganic fibrous particles in exhaust gas - Scanning electron microscopy method
VDI 3862 Blatt 5-2008 Gaseous emission measurement - Measurement of lower aldehydes especially acrolein with the 2-HMP-method - GC-method

European Committee for Standardization (CEN), Exhaust gas ultra-low emission

EN 16429:2021 Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere
PD CEN/TR 13801:2014 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation
CEN/TR 13801:2014 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation

AT-ON, Exhaust gas ultra-low emission

OENORM EN 16429-2021 Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere
ONORM M 7455-1990 Fan-assisted gas burners with low NOx-emission; nitrogen oxide measurement

CH-SNV, Exhaust gas ultra-low emission

SN EN 16429-2021 Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere

IT-UNI, Exhaust gas ultra-low emission

UNI EN 16429-2021 Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere

Lithuanian Standards Office , Exhaust gas ultra-low emission

LST EN 16429-2021 Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere
LST ISO 3929:2004 Road vehicles - Measurement methods for exhaust gas emissions during inspection or maintenance (idt ISO 3929:2003)
LST ISO 16183:2006 Heavy-duty engines - Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions (identical ISO 16183:2002)
LST ISO 16185:2006 Road vehicles - Engine families for certification of heavy-duty vehicles by Exhaust emission (identical ISO 16185:2000)
LST ISO 7671:2004 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polypropylene (PP) (idt ISO 7671:2003)
LST L ENV 13801-2002 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation

Professional Standard - Nuclear Industry, Exhaust gas ultra-low emission

EJ/T 20159-2018 Acceptance criteria for overpressure treatment of low- and medium-level radioactive compactable solid waste
EJ/T 20190-2018 Gas Chromatography Method for Determination of TBP and DBP Concentration in Low-level Organic Waste Liquid

US-CFR-file, Exhaust gas ultra-low emission

CFR 14-34.23-2013 Aeronautics and Space. Part34:Fuel venting and exhaust emission requirements for turbine engine powered airplanes. Section34.23:Exhaust emission standards for engines manufactured on and after july 18, 2012.
CFR 40-86.1823-08-2014 Protection of Environment. Part86:Control of emissions from new and in-use highway vehicles and engines. Section86.1823-08:Durability demonstration procedures for exhaust emissions.
CFR 40-98.353-2013 Protection of environment. Part98:Mandatory greenhouse gas reporting. Subpart II:Industrial wastewater treatment. Section98.353:Calculating GHG emissions.
CFR 40-1037.104-2014 Protection of Environment. Part1037:Control of emissions from new heavy–duty motor vehicles. Section1037.104:Exhaust emission standards for CO2, CH4, and N2O for heavy-duty vehicles at or below 14,000 pounds GVWR.

U.S. Environmental Protection Agency (U.S. EPA), Exhaust gas ultra-low emission

EPA 40 CFR PART 600-2010 FUEL ECONOMY AND CARBON-RELATED EXHAUST EMISSIONS OF MOTOR VEHICLES

Henan Provincial Standard of the People's Republic of China, Exhaust gas ultra-low emission

DB41/T 2199-2021 Technical specifications for continuous monitoring of ammonia emissions from stationary pollution sources

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Exhaust gas ultra-low emission

GB 17691-2001 Limits and measurement methods for exhaust pollutants from compression ignition(C.I.) engines of vehicles
GB 3847-2005 Limits and measurement methods for exhaust smoke from C.I.E. (Compression Ignition Engine) and vehicle equiped with C.I.E.
GB/T 7165.2-2008 Equipment for continuous monitoring of radioactivity in gaseous effluents.Part 2:Specific requirements for radioactive aerosol monitors including transuranic aerosols
GB/T 7165.6-1989 Equipment for continuously monitoring radioactivity in gaseous effluents--Part 6: Specific requirements for transuranic aerosol effluent monitors
GB 20891-2007 Limits and measurement methods for exhaust pollutants from diesel engines of non-road mobile machinery (Ⅰ、Ⅱ)
GB 18285-2005 Limits and measurement methods for exhaust pollutants from vehicles equipped ignition engine under two-speed idle conditions and simple driving mode conditions
GB 14762-2002 Limits and measurement methods for exhaust pollutants from positive ignition(P.I.)engines of vehicles and vehicles equipped with P.Iengines
GB 19756-2005 Limits and measurement methods for exhaust pollutants from diesel engines of tri - wheel & low - speed goods vehicles

PL-PKN, Exhaust gas ultra-low emission

PN-EN 16429-2021-08 E Stationary source emissions -- Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere
PN Z04092-05-1990 Air purity protection Tests for nitric acid and nitrogen oxides Determination of nitrogen oxide, dioxide and total nitrogen oxides in waste gases (emission)

GOSTR, Exhaust gas ultra-low emission

GOST R ISO 8178-5-2017 Reciprocating internal combustion engines. Exhaust emission measurement. Part 5. Test fuels
GOST 34471.6-2018 Reciprocating internal combustion engines. Exhaust emission measurement. Part 6. Report of measuring results and test
GOST 24585-1981 Marine, locomotive and commercial diesels. Emission of harmful substances with exhaust gases. Permissible values and measurement methods

ZA-SANS, Exhaust gas ultra-low emission

SANS 8770:2008 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polyethylene (PE)
SANS 7675:2004 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Chlorinated poly(vinyl chloride) (PVC-C)
SANS 7682:2006 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Acrylonitrile-butadiene-styrene (ABS)

NZ-SNZ, Exhaust gas ultra-low emission

AS/NZS 4401:2006 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings-Polyethylene (PE)

TH-TISI, Exhaust gas ultra-low emission

TIS 1727-1998 Road vehicles.measurement methods for exhaust gas emissions during inspection or maintenace

HU-MSZT, Exhaust gas ultra-low emission

MSZ 21869/3-1981

National Aeronautics and Space Administration (NASA), Exhaust gas ultra-low emission

NASA-STD-(I)-6001 REV A-2008 FLAMMABILITY, OFFGASSING, AND COMPATIBILITY REQUIREMENTS AND TEST PROCEDURES (NASA Interim Standard)

American Society for Testing and Materials (ASTM), Exhaust gas ultra-low emission

ASTM F2826-14 Standard Test Method for Evaluating the Sustained Air Performance and Exhaust Emission Efficiencies of Central Vacuum Cleaning Units

Heilongjiang Provincial Standard of the People's Republic of China, Exhaust gas ultra-low emission

DB23/T 2714-2020 Air Pollutant Emission Standards for Non-incineration Low-Temperature Treatment Facilities for Rural Domestic Garbage

RO-ASRO, Exhaust gas ultra-low emission

STAS SR ISO 8178-3:1996 Reciprocating internai combustion engines - Exhaust emission measurement - Part 3: Definitions and methods of measure-ment of exhaust gas smoke under steady-state conditions

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Exhaust gas ultra-low emission

IEEE C62.32-1981 Standard Test Specifications for Low-Voltage Air Gap Surge-Protective Devices (Excluding Valve and Expulsion Devices)

International Electrotechnical Commission (IEC), Exhaust gas ultra-low emission

IEC 60761-6:1991 Equipment for continuously monitoring radioactivity in gaseous effluents; part 6: specific requirements for transuranic aerosol effluent monitors

European Committee for Electrotechnical Standardization（CENELEC）, Exhaust gas ultra-low emission

EN 60761-2:2004 Equipment for continuous monitoring radioactivity in gaseous effluents Part 2: Specific requirements for aerosols monitors including transuranic aerosols

AENOR, Exhaust gas ultra-low emission

UNE 53944:2011 IN Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation.