ZH
RU
ES

Four point bending test machine

Four point bending test machine, Total:312 items.

In the international standard classification, Four point bending test machine involves: Solar energy engineering, Construction materials, Glass, Ceramics, Plastics, Insulating materials, Materials for aerospace construction, Inorganic chemicals, Mechanical testing, Testing of metals, Leather technology, Welding, brazing and soldering, Farming and forestry, Pipeline components and pipelines, Linear and angular measurements, Products of the textile industry, Semiconductor devices, Refractories, Paper and board, Test conditions and procedures in general, Products of the chemical industry, Components and accessories for telecommunications equipment, Rubber, Road vehicle systems, Electrical wires and cables, Surface treatment and coating, Electronic display devices, Medical equipment, Aerospace fluid systems and components, Valves, Reinforced plastics, Electromechanical components for electronic and telecommunications equipment, Fruits. Vegetables, On-board equipment and instruments, Aerospace electric equipment and systems, Rubber and plastics products, Waxes, bituminous materials and other petroleum products, Paints and varnishes, Equipment for the rubber and plastics industries, Fluid power systems, Integrated circuits. Microelectronics, Electronic components in general, Electronic component assemblies, Materials for the reinforcement of composites, Lubricants, industrial oils and related products.

Group Standards of the People's Republic of China, Four point bending test machine

T/CSTM 00587-2023 Test method for flexural strength of crystalline silicon cells—Four-point flexural
T/QYSJLXH 003-2020 Technical specification for steel bar bending testing machine
T/CMA YJ069-0201 Technical Requirements for Measurement of Steel Bar Bending Testing Machine
T/CSTM 00820-2022 Rotary flexure test method of hydraulic tubing joints and fittings for civil aircraft

Professional Standard - Machinery, Four point bending test machine

JB/T 7716-1995 Four-point bending fatigue test method for welded joints
JB/T 9374-2015 Pure bending fatigue testing machines.Technical specification
JB/T 9374-1999 Specifications for the rotary bending fatigue testing machines
JB/T 10696.3-2007 Test methods for determining mechanical, physical and chemical properties of electric cables and wires Part 3: Bending test

International Organization for Standardization (ISO), Four point bending test machine

ISO 21914:2019 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
ISO 1288-3:2016 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
ISO 5402:2002 | IULTCS/IUP 20 Leather — Physical and mechanical tests — Determination of flex resistance by flexometer method
ISO 23242:2020 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
ISO 22288:2006 | IULTCS/IUP 39 Leather — Physical and mechanical tests — Determination of flex resistance by the vamp flex method
ISO 14087:2011 Leather - Physical and mechanical tests - Determination of bending force
ISO 14087:2022 Leather — Physical and mechanical tests — Determination of bending force
ISO 14087:2022 | IULTCS/IUP 54 Leather — Physical and mechanical tests — Determination of bending force
ISO 14087:2011 | IULTCS/IUP 54 Leather — Physical and mechanical tests — Determination of bending force
ISO 22288:2006 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method
ISO 5402:2002 Leather - Physical and mechanical tests - Determination of flex resistance by flexometer method
ISO 5893:2002 Rubber and plastics test equipment - Tensile, flexural and compression types (constant rate of traverse) - Specification
ISO 22751:2020 Rubber- or plastic-coated fabrics — Physical and mechanical test — Determination of bending force

British Standards Institution (BSI), Four point bending test machine

BS EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Test with specimen supported at two points (four point bending)
18/30356322 DC BS ISO 21914. Test methods for fibre-reinforced cementitious composites. Bending moment-curvature curve by four-point bending test
BS EN 2746:1998 Glass fibre reinforced plastics - Flexural test - Three point bend method
BS EN 910:1996 Destructive tests on welds in metallic materials - Bend tests
BS ISO 23242:2020 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
BS EN 13335:2002 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method
19/30375027 DC BS ISO 23242. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
BS IEC 62047-31:2019 Semiconductor devices. Micro-electromechanical devices - Four-point bending test method for interfacial adhesion energy of layered MEMS materials
14/30288711 DC BS EN ISO 1288-3. Glass in building. Determination of the bending strength of glass. Part 3. Test with specimen supported at two points (four-point bending)
BS EN ISO 14087:2011 Leather. Physical and mechanical tests. Determination of bending force
BS EN 50289-3-9:2001 Communication cables - Specifications for test methods - Mechanical test methods - Bending tests
BS IEC 61747-40-2:2015 Liquid crystal display devices. Mechanical testing of display cover glass for mobile devices. Uniaxial flexural strength (4-point bend)
BS EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method
BS EN 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations – Test 16c: Contact-bending strength
BS 2782 Pt.3 Meth.335A:1993 Test methods for plastics. Part 3: Mechanical properties. Test method 335A: Determination of bending properties
BS PD CEN/TS 15963:2014 Bitumen and bituminous binders. Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS DD CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS EN 1680:1997 Plastics piping systems. Valves for polyethylene (PE) piping systems. Test method for leaktightness under and after bending applied to the operating mechanism

Association Francaise de Normalisation, Four point bending test machine

NF P78-343*NF EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3 : test with specimen supported at two points (four points bending).
NF EN 1288-3:2000 Verre dans la construction - Détermination de la résistance du verre à la flexion - Partie 3 : essais avec éprouvettes supportées en deux points (flexion quatre points)
NF G52-043*NF EN ISO 14087:2012 Leather - Physical and mechanical tests - Determination of bending force
NF EN ISO 14087:2022 Cuir - Essais physiques et mécaniques - Détermination de la force de flexion
NF G52-030:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method.
NF L41-230:1985 Aircraft. Hydraulic tubing joints and fittings. Rotary flexure test.
NF C93-537-3-9*NF EN 50289-3-9:2001 Communication cables - Specifications for test methods - Part 3-9 : mechanical test methods - Bending tests
NF P18-413:1981 Concretes. Individual properties of hydraulic machines for bending tests of hard materials.
NF L52-400-510:2013 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 510: bending test
NF L52-250-406*NF EN 3475-406:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 406 : cold bend test
NF EN 60512-16-3:2008 Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-3 : essais mécaniques des contacts et des sorties - Essai 16c : tenue des contacts au pliage
NF EN ISO 15744:2008 Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-3 : essais mécaniques des contacts et des sorties - Essai 16c : tenue des contacts au pliage
NF EN 15564:2008 Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-3 : essais mécaniques des contacts et des sorties - Essai 16c : tenue des contacts au pliage
NF L52-400-504*NF EN 3745-504:2003 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 504 : micro bending test
XP E25-046-2:2022 Fixations - Essais de résistance au dévissage/desserrage - Partie 2 : méthode d'essai par flexion alternée, dite " Hélicoptère "
NF L52-250-512:2003 Aerospace series - Cables, electrical, aircarft use - Test methods - Part 512 : flexure endurance.
NF Q03-128-2*NF ISO 2493-2:2020 Paper and board - Determination of resistance to bending - Part 2 : taber-type tester
XP T66-078*XP CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
XP CEN/TS 15963:2014 Bitumes et liants bitumineux - Détermination de la température de résistance à la fissuration par un essai de flexion 3 points sur un barreau entaillé
NF T54-920*NF EN 1680:1997 Plastics piping systems. Valves for polyethylene (PE) piping systems. Test method for leaktightness under and after bending applied to the operating mechanism.
NF L52-250-405*NF EN 3475-405:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 405 : bending at ambient temperature
NF C93-704-1-4*NF EN 62137-1-4:2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-4 : cyclic bending test.
NF L54-002-059*NF EN 2591-416:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 416 : contact bending strength
NF C93-400-16-3*NF EN 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3 : mechanical tests on contacts and terminations - Test 16c : contact-bending strength
NF EN ISO 32100:2018 Supports textiles revêtus de caoutchouc ou de plastique - Essais physiques et mécaniques - Détermination de la résistance à la flexion à l'aide d'un flexomètre
NF P18-411:1981 Concretes. Common characteristics of hydraulic machines for compression, bending, and tension testing of hard materials.
NF EN 62047-18:2014 Dispositifs à semiconducteurs - Dispositif microélectromécaniques - Partie 18 : méthodes d'essai de flexion des matériaux en couche mince
NF C96-050-18*NF EN 62047-18:2014 Semiconductor devices - Micro-electromechanical devices - Part 18 : bend testing methods of thin film materials
NF L52-250-512*NF EN 3475-512:2021 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 512 : flexure endurance

Danish Standards Foundation, Four point bending test machine

DS/EN 1288-3:2001 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
DS/EN 2746:1999 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
DS/EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method
DS/EN ISO 14087:2012 Leather - Physical and mechanical tests - Determination of bending force
DS/EN 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength
DS/EN 3745-510:2012 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 510: Bending test
DS/EN 1680:1998 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism
DS/CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
DS/EN 3745-514:2009 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 514: Cable twist bend
DS/EN 62137-1-4:2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-4: Cyclic bending test
DS/EN 60811-504:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths
DS/EN 3745-516:2012 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 516: Severe cable bend test
DS/EN 62047-18:2013 Semiconductor devices - Micro-electromechanical devices - Part 18: Bend testing methods of thin film materials

Lithuanian Standards Office , Four point bending test machine

LST EN 1288-3-2002 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
LST EN 2746-2001 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
LST EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method (ISO 22288:2006)
LST EN ISO 14087:2012 Leather - Physical and mechanical tests - Determination of bending force (ISO 14087:2011)
LST EN 3745-510-2012 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 510: Bending test
LST EN 1680-2002 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanisms
LST EN 3745-514-2009 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 514: Cable twist bend
LST EN 60512-16-3-2008 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength (IEC 60512-16-3:2008)
LST EN 3745-516-2012 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 516: Severe cable bend test
LST EN ISO 22751:2020 Rubber or plastic coated fabrics - Physical and mechanical test - Determination of bending force (ISO 22751:2020)

AENOR, Four point bending test machine

UNE-EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
UNE-EN ISO 14087:2012 Leather - Physical and mechanical tests - Determination of bending force (ISO 14087:2011)
UNE-EN 60811-504:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths

German Institute for Standardization, Four point bending test machine

DIN EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); German version EN 1288-3:2000
DIN EN 1288-3:2000-09 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); German version EN 1288-3:2000 / Note: To be replaced by DIN EN ISO 1288-3 (2007-10).
DIN 51944:1999 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN EN 2746:1998-10 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN 51944:2020 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN 51944:2020-12 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN 16841:2012 Plastics piping systems - Testing of pipes and components - Determination of flexural creep of plastics by four-point loading
DIN EN ISO 5173:2012 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009 + Amd 1:2011); German version EN ISO 5173:2010 + A1:2011
DIN 51944 Berichtigung 1:2006 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials, Corrigendum to DIN 51944:1999-01
DIN EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method (ISO 22288:2006); English version of DIN EN ISO 22288:2009-04
DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters
DIN 51944 Corrigendum 1:2006 Testing of carbonaceous materials - Determination of flexural strength by four point method - Soild materials Corrigendum 1 to English version of DIN 51944:1999-01
DIN 51902:2020 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 16841:2012-08 Plastics piping systems - Testing of pipes and components - Determination of flexural creep of plastics by four-point loading
DIN 51302-2:2000 Materials testing machines - Strain cylinder test method for compression testing machines for concrete
DIN EN 12100:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for the resistance to bending between supports; German version EN 12100:1997
DIN EN 60512-16-3:2009-03 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength (IEC 60512-16-3:2008); German version EN 60512-16-3:2008 / Note: DIN IEC 60512-8 (1994-05) rema...
DIN EN 1680:1997 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism; German version EN 1680:1997
DIN EN 1680:1997-03 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism; German version EN 1680:1997
DIN EN 1680:2023-11 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanisms; German and English version prEN 1680:2023 / Note: Date of issue 2023-10-13*Intended as re...
DIN EN 3745-504:2003 Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 504: Micro bending test; German and English version EN 3745-504:2002
DIN 51230:1977 Material Testing Machines; Dynstat Apparatus for the Determination of Bending Strength and Impact Strength of Small Specimens
DIN EN 60512-16-3:2009 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength (IEC 60512-16-3:2008); German version EN 60512-16-3:2008
DIN EN 50289-3-9:2002 Communication cables - Specifications for test methods - Part 3-9: Mechanical test methods; Bending tests; German version EN 50289-3-9:2001
DIN EN 3475-512:2022 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 512: Flexure endurance; German and English version EN 3475-512:2021
DIN EN 3475-512:2021 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 512: Flexure endurance; German and English version FprEN 3475-512:2020

Association of German Mechanical Engineers, Four point bending test machine

DVS 3101-2-1999

European Committee for Standardization (CEN), Four point bending test machine

EN 1288-3:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 3: Test with Specimen Supported at Two Points (Four Point Bending)
EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
EN 13335:2002 Leather - Physical and Mechanical Tests - Determination of Flex Resistance by the Vamp Flex Method
EN ISO 5173:2023 Destructive tests on welds in metallic materials - Bend tests (Incorporates Amendment A1: 2011)
EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests (Incorporates Amendment A1: 2011)
EN ISO 14087:2022 Leather - Physical and mechanical tests - Determination of bending force (ISO 14087:2022)
EN ISO 14087:2011 Leather - Physical and mechanical tests - Determination of bending force (ISO 14087:2011)
EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method [Superseded: CEN EN 13335]
EN 12100:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports
prEN ISO 14087:2021 Leather - Physical and mechanical tests - Determination of bending force (ISO/DIS 14087:2021)
PD CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
EN 2591-416:2001 Aerospace series - Elements of electrical and optical connection; Test methods - Part 416: Contact bending strength
EN ISO 22751:2020 Rubber or plastic coated fabrics - Physical and mechanical test - Determination of bending force (ISO 22751:2020)
EN 3745-405:2012 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 405: Low/High temperature bend test
EN 3745-510:2017 Aerospace series - Fibres and cables@ optical@ aircraft use - Test methods - Part 510: Bending test

RU-GOST R, Four point bending test machine

GOST 32281.3-2013 Glass and glass products. Determination of the bending strength. Test with specimen supported at two points (four points bending)
GOST R ISO 14087-2015 Leather. Physical and mechanical tests. Method for determination of bending force
GOST 28840-1990 Mashines tension, press and bending materials. General technical requirements
GOST R 56681-2015 Polymer composites. Determination of mechanical characteristics by compression of unidirectional reinforcement materials by four-point bending of sandwich beam
GOST 27278-1987 Electromechanical radio components. Method of testing cable clamp strength to cable bending

American Society for Testing and Materials (ASTM), Four point bending test machine

ASTM D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-23 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D6272-02(2008)e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-17 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-17e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D5023-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM E2092-00 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-04 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-03 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18a Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D8058-19 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM E2092-13 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-23 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM C651-91(2005)e1 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM C651-91(2010)e1 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM C651-20 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM C651-11 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM C651-13 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM C651-15 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM D5023-99 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM C598-93(2003) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM C598-93(2008) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM C598-93(2013) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
ASTM D522/D522M-17(2021) Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
ASTM D522/D522M-17 Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
ASTM D6272-10 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D522-93a(2001) Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
ASTM D6125-97 Standard Test Method for Bending Resistance of Paper and Paperboard (Gurley Type Tester)
ASTM D522-93a Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
ASTM D6125-97(2002) Standard Test Method for Bending Resistance of Paper and Paperboard (Gurley Type Tester)
ASTM D522/D522M-13 Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
ASTM D6905-03 Standard Test Method for Impact Flexibility of Organic Coatings
ASTM D6905-03(2008) Standard Test Method for Impact Flexibility of Organic Coatings
ASTM D6905-03(2012) Standard Test Method for Impact Flexibility of Organic Coatings
ASTM D6272-02 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-00 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM E2769-13 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-15 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-16 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM D8458-22 Standard Test Method for Evaluation of Fatigue Performance of Asphalt Mixtures Using the Three-Point Bending Cylinder (3PBC) Test
ASTM D8058-17 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D8058-17e1 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM C78/C78M-10 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-10e1 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-22 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-15 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM D5342-97 Standard Test Method for Resistance to Bending of Paper and Paperboard (Taber-Type Tester in Basic Configuration)
ASTM D5342-97(2002) Standard Test Method for Resistance to Bending of Paper and Paperboard (Taber-Type Tester in Basic Configuration)
ASTM D5342-97(2007) Standard Test Method for Resistance to Bending of Paper and Paperboard (Taber-Type Tester in Basic Configuration)
ASTM E2769-22 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-11 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2092-09 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D5418-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam)
ASTM D5418-23 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam)
ASTM C1609/C1609M-19 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-05 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-06 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-07 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-19a Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-12 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-10 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C947-03 Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
ASTM C947-99 Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
ASTM D4684-08 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
ASTM D4684-12 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
ASTM D7972-14(2020) Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature
ASTM E2769-18 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading

Japanese Industrial Standards Committee (JISC), Four point bending test machine

JIS R 3111-3:2022 Glass in building -- Determination of the bending strength of glass -- Part 3: Test with specimen supported at two points (four-point bending)
JIS K 7084:1993 Testing method for impact properties of carbon fibre reinforced plastics by instrumented 3-point bending impact test
JIS K 5600-5-1:1999 Testing methods for paints -- Part 5: Mechanical property of film -- Section 1: Bend test (cylindrical mandrel)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Four point bending test machine

GB/T 34171-2017 Test method for flexural property of thin and ultrathin glass—Three-point bending method
GB/T 17737.314-2018 Coaxial communication cables—Part 1-314: Mechanical test methods—Test for cable bending

Korean Agency for Technology and Standards (KATS), Four point bending test machine

KS B 5535-2003(2018)
KS B 5535-2003 Material testing machines－Bending－test machines
KS B 5535-1982 Material testing machines－Bending－test machines
KS M ISO 22288-2008(2013) Leather－Physical and mechanical tests－Determination of flex resistance by the vamp flex method
KS M ISO 22288:2008 Leather-Physical and mechanical tests-Determination of flex resistance by the vamp flex method
KS M ISO 5402:2008 Leather-Physical and mechanical tests-Determination of flex resistance by flexometer method
KS M ISO 5402:2013 Leather－Physical and mechanical tests－Determination of flex resistance by flexometer method
KS M ISO 11093-6:2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS M ISO 11093-6:2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS K 0605-2012 Test method for bow and skewness of woven and knitted fabrics
KS M ISO 2493-2:2022 Paper and board — Determination of bending resistance — Part 2: Taber-type tester
KS M ISO 2493-2:2017 Paper and board - Determination of bending resistence-Part2:Taber-type tester
KS M ISO 5893:2005 Rubber and plastics test equipment-Tensile, flexural and compression types(constant rate of traverse)-Specification
KS M ISO 5893:2015 Rubber and plastics test equipment－Tensile, flexural and compression types(constant rate of traverse)－Specification
KS C IEC 62047-18:2016 Semiconductor devices ― Micro-electromechanical devices ― Part 18: Bend testing methods of thin film materials
KS C IEC 62047-22:2016 Semiconductor devices ― Micro-electromechanical devices ― Part 18: Bend testing methods of thin film materials
KS C IEC 62047-18-2016(2021) Semiconductor devices ― Micro-electromechanical devices ― Part 18: Bend testing methods of thin film materials
KS C IEC 62047-22-2016(2021) Semiconductor devices ― Micro-electromechanical devices ― Part 18: Bend testing methods of thin film materials

KR-KS, Four point bending test machine

KS B 5535-2003(2023)
KS M ISO 4666-2-2015 Rubber, vulcanized－Determination of temperature rise and resistance to fatigue in flexometer testing－Part 2：Rotary flexometer
KS M ISO 11093-6-2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS K 0605-2017(2022) Test method for bow and skewness of woven and knitted fabrics
KS M ISO 2493-2-2022 Paper and board — Determination of bending resistance — Part 2: Taber-type tester
KS C IEC 62047-18-2016 Semiconductor devices ― Micro-electromechanical devices ― Part 18: Bend testing methods of thin film materials
KS C IEC 62047-22-2016 Semiconductor devices ― Micro-electromechanical devices ― Part 18: Bend testing methods of thin film materials

American National Standards Institute （ANSI), Four point bending test machine

ANSI/ASAE S459-1993 Shear and Three-Point Bending Test of Animal Bones
ANSI/ASTM D5342:1997 Test Method for Resistance to Bending of Paper and Paperboard (Taber-Type Tester in Basic Configuration)
ANSI/ASTM C651:2013 Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature

IT-UNI, Four point bending test machine

UNI 564-1960
UNI 5294-1978 Mechanical tests of ferrous material. Reverse bend test for steel wires.
UNI 5548-1965
UNI EN ISO 22751:2020 Rubber or plastic coated fabrics - Physical and mechanical test - Determination of bending force
UNI ISO 2493-2:2020 Paper and board — Determination of resistance to bending — Part 2: Taber-type tester
UNI 5549-1965

工业和信息化部/国家能源局, Four point bending test machine

JB/T 13554-2018 Internal combustion engine crankshaft bending fatigue test method

RO-ASRO, Four point bending test machine

STAS 5540/8-1988 MECHANICAL TESTS OF FRICTION WELDED BUTT JOINTS Bending test
STAS 10897/4-1983 Tests of metals MECHANICAL TESTING OF SOLDERED AND BRAZED JOINTS Bend testing
STAS SR ISO 7257:1996 Aircraft - Hidraulyc tubing joints and fittings - Rotary flexure test

Malaysia Standards, Four point bending test machine

MS 1473-1999 Method of test for measuring the dynamic mechanical properties of plastics using three point bending

International Electrotechnical Commission (IEC), Four point bending test machine

IEC 62047-31:2019 Semiconductor devices - Micro-electromechanical devices - Part 31: Four-point bending test method for interfacial adhesion energy of layered MEMS materials
IEC 61196-1-314:2015 Coaxial communication cables - Part 1-314: Mechanical test methods - Test for bending
IEC 61196-1-314:2006 Coaxial communication cables - Part 1-314: Mechanical test methods - Test for bending
IEC 61747-40-2:2015 Liquid crystal display devices - Part 40-2: Mechanical testing of display cover glass for mobile devices - Uni-axial flexural strength (4-point bend)
IEC 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength

国家市场监督管理总局、中国国家标准化管理委员会, Four point bending test machine

GB/T 38686-2020 Test method for flexibility of ultrathin glass—Two point bending method
GB/T 38978-2020 Refractory products—Determination of stress-strain (three-point bending method）
GB/T 39368-2020 Leather—Physical and mechanical tests—Determination of flex resistance：Vamp flex method

Professional Standard - Automobile, Four point bending test machine

QC/T 637-2000 Automobile engine crankshaft bending fatigue strength test method

National Metrological Technical Specifications of the People's Republic of China, Four point bending test machine

JJF(石化) 025-2019 Calibration Specification for Wheels Bending Fatigue Testing Machine
JJF(石化)025-2019 Calibration Specification for Wheels Bending Fatigue Testing Machine
JJF 1315.2-2011 Program of Pattern Evaluation for Fatigue Testing Machines―Part 2 :Rotating Pure Bending Fatigue Testing Machines

Aerospace, Security and Defence Industries Association of Europe (ASD), Four point bending test machine

ASD-STAN PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending (Edition P1)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Four point bending test machine

PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending (Edition P1)
PREN 3745-510-2015 Aerospace series Fibres and cables@ optical@ aircraft use Test methods Part 510: Bending test (Edition P 3)

Liaoning Provincial Standard of the People's Republic of China, Four point bending test machine

DB21/T 2104-2013 Calibration procedure for metal wire repeated bending test machine

National Metrological Verification Regulations of the People's Republic of China, Four point bending test machine

JJG 652-2012 Rotating Pure Bending Fatigue Testing Machines
JJG 652-1990 Verification Regulation of Rotating Pure Bending Fatigue Testing Machines

Society of Automotive Engineers (SAE), Four point bending test machine

SAE J949-2009 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three Point Bending Test
SAE J949-2022 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three-Point Bending Test

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Four point bending test machine

GB/T 2951.23-1994 Test method for determining mechanical and physical properties of electric cables and wires. Bending test
GB/T 17200-1997 Requirements for tensile, flexural and compression testing machines for rubbers and plastics
GB/T 17200-2008 Technical specification for tensile, compression and flexural testing machines for rubber an plastics (constant rate of traverse)
GB/T 42895-2023 Bending strength test method of microelectromechanical system (MEMS) technology silicon-based MEMS microstructure
GB/T 7689.4-2001 Reinforcements--Test method for woven fabrics Part 4: Determination of flexural stiffness
GB/T 7689.4-2013 Reinforcements.Test method for woven fabrics.Part 4: Determination of flexural stiffness

European Association of Aerospace Industries, Four point bending test machine

AECMA PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending Edition P1
AECMA PREN 2591-D16-1992 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part D16 - Contact Bending Strength Issue P 1

IEC - International Electrotechnical Commission, Four point bending test machine

IEC 62047-31:2017 Semiconductor devices – Micro-electromechanical devices – Part 31: Four-point bending test method for interfacial adhesion energy of layered MEMS materials (Edition 1.0)

ES-AENOR, Four point bending test machine

UNE 28 012 h5

Professional Standard - Aviation, Four point bending test machine

HB 6442-1990 Bending fatigue test of aircraft hydraulic conduits and connectors
HB 5434.6-2004 Test methods for aircraft wheel friction materials-Part 6:Test method for bend strength

Professional Standard - Medicine, Four point bending test machine

YY/T 0858-2011 Standard guide for three-piont bending of balloon expandable vascular stents and stent systems

IN-BIS, Four point bending test machine

IS 1403 Pt.1-1993
IS 13824-1993 internal combustion engines. Method of verification of emission of crank case gases for vehicles powered with four stroke spark ignition engines

European Committee for Electrotechnical Standardization（CENELEC）, Four point bending test machine

EN 50289-3-9:2001 Communication Cables - Specifications for Test Methods Part 3-9: Mechanical Test Methods - Bending Tests
EN 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength
EN 60811-504:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths
EN 62047-18:2013 Semiconductor devices - Micro-electromechanical devices - Part 18: Bend testing methods of thin film materials

Professional Standard - Aerospace, Four point bending test machine

QJ 1367-1988 Bending test method for solid rocket motor combustor casing

BR-ABNT, Four point bending test machine

ABNT NBR 15669-2 Versão Corrigida-2009 Implants for surgry - Pins for use with external fixation devices Part 2: Test method for determining the static four poinbt bending properties

AT-ON, Four point bending test machine

OENORM EN ISO 14087:2021 Leather - Physical and mechanical tests - Determination of bending force (ISO/DIS 14087:2021)
ONORM ENV 658-5-1993 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of shear strength by short span bend test (three-point)
OENORM EN ISO 22751:2020 Rubber or plastic coated fabrics - Physical and mechanical test - Determination of bending force (ISO 22751:2020)

Indonesia Standards, Four point bending test machine

SNI 4154-2014 Standard test method for flexural strength of concrete (using simple beam with center-point loading)

GOSTR, Four point bending test machine

GOST 7268-1982 Steel. Method for determination of ability to mechanical ageing by impact bend testing

ES-UNE, Four point bending test machine

UNE-EN 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements -- Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength (Endorsed by AENOR in February of 2009.)

未注明发布机构, Four point bending test machine

BS PD CEN TS 15963:2014 Bitumen and bituminous binders — Determination of the fracture toughness temperature by a three point bending test on a notched specimen

CENELEC - European Committee for Electrotechnical Standardization, Four point bending test machine

EN 62137-1-4:2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-4: Cyclic bending test

BE-NBN, Four point bending test machine

NBN X 07-001-1987 Classification and càlibration of material testing machines -Machines for compression, bending and tensile tests

YU-JUS, Four point bending test machine

JUS N.R4.461-1990 Electromechanicai components for electronic equipment. Test methods. Test 16c: Contact bending strength

AGMA - American Gear Manufacturers Association, Four point bending test machine

08FTM11-2008 Bending Fatigue Tests of Helicopter Case Carburized Gears: Influence of Material@ Design and Manufacturing Parameters

CH-SNV, Four point bending test machine

SN EN ISO 22751:2021 Rubber or plastic coated fabrics - Physical and mechanical test - Determination of bending force (ISO 22751:2020)

PL-PKN, Four point bending test machine

PN-EN ISO 22751-2021-03 E Rubber or plastic coated fabrics - Physical and mechanical test - Determination of bending force (ISO 22751:2020)
PN-EN 3475-512-2021-08 E Aerospace series -- Cables, electrical, aircraft use -- Test methods -- Part 512: Flexure endurance