ZH
RU
ES

Four-point bending test machine

Four-point bending test machine, Total:106 items.

In the international standard classification, Four-point bending test machine involves: Glass, Solar energy engineering, Construction materials, Ceramics, Leather technology, Plastics, Insulating materials, Inorganic chemicals, Rubber, Valves, Pipeline components and pipelines, Fruits. Vegetables, Paper and board, Semiconductor devices, Electromechanical components for electronic and telecommunications equipment, Products of the chemical industry, Electronic display devices, Waxes, bituminous materials and other petroleum products, Road engineering, Medical equipment.

Association Francaise de Normalisation, Four-point bending test machine

NF EN 1288-3:2000 Verre dans la construction - Détermination de la résistance du verre à la flexion - Partie 3 : essais avec éprouvettes supportées en deux points (flexion quatre points)
NF P78-343*NF EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3 : test with specimen supported at two points (four points bending).
NF G52-030:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method.
XP E25-046-2:2022 Fixations - Essais de résistance au dévissage/desserrage - Partie 2 : méthode d'essai par flexion alternée, dite " Hélicoptère "
XP CEN/TS 15963:2014 Bitumes et liants bitumineux - Détermination de la température de résistance à la fissuration par un essai de flexion 3 points sur un barreau entaillé
NF EN 60512-16-3:2008 Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-3 : essais mécaniques des contacts et des sorties - Essai 16c : tenue des contacts au pliage
NF EN ISO 15744:2008 Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-3 : essais mécaniques des contacts et des sorties - Essai 16c : tenue des contacts au pliage
NF EN 15564:2008 Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-3 : essais mécaniques des contacts et des sorties - Essai 16c : tenue des contacts au pliage
NF EN ISO 32100:2018 Supports textiles revêtus de caoutchouc ou de plastique - Essais physiques et mécaniques - Détermination de la résistance à la flexion à l'aide d'un flexomètre
NF C93-400-16-3*NF EN 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3 : mechanical tests on contacts and terminations - Test 16c : contact-bending strength
NF P98-261-1:2001 Test relating to pavements - Determination of the fatigue resistance of bituminous mixtures - Part 1 : two points flexural fatigue test with constant displacement on trapezoidal isocel specimens.
NF EN 60512-16-14:2009 Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-14 : essais mécaniques des contacts et des sorties - Essai 16n : résistance à la flexion des languettes fixes
NF C93-400-16-14*NF EN 60512-16-14:2009 Connectors for electronic equipment - Tests and measurements - Part 16-14 : mechanical tests on contacts and terminations - Test 16n : Bending strength, fixed male tabs

RU-GOST R, Four-point bending test machine

GOST 32281.3-2013 Glass and glass products. Determination of the bending strength. Test with specimen supported at two points (four points bending)

Japanese Industrial Standards Committee (JISC), Four-point bending test machine

JIS R 3111-3:2022 Glass in building -- Determination of the bending strength of glass -- Part 3: Test with specimen supported at two points (four-point bending)

German Institute for Standardization, Four-point bending test machine

DIN EN 1288-3:2000-09 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); German version EN 1288-3:2000 / Note: To be replaced by DIN EN ISO 1288-3 (2007-10).
DIN EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); German version EN 1288-3:2000
DIN 51944:1999 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN 51944:2020 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN 51944:2020-12 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN EN 12100:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for the resistance to bending between supports; German version EN 12100:1997
DIN 16841:2012 Plastics piping systems - Testing of pipes and components - Determination of flexural creep of plastics by four-point loading
DIN 51944 Berichtigung 1:2006 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials, Corrigendum to DIN 51944:1999-01
DIN EN 60512-16-3:2009 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength (IEC 60512-16-3:2008); German version EN 60512-16-3:2008
DIN 51944 Corrigendum 1:2006 Testing of carbonaceous materials - Determination of flexural strength by four point method - Soild materials Corrigendum 1 to English version of DIN 51944:1999-01
DIN EN 60512-16-14:2009 Connectors for electronic equipment - Tests and measurements - Part 16-14: Mechanical tests on contacts and terminations - Test 16n: Bending strength, fixed male tabs (IEC 60512-16-14:2008); German version EN 60512-16-14:2008

Group Standards of the People's Republic of China, Four-point bending test machine

T/CSTM 00587-2023 Test method for flexural strength of crystalline silicon cells—Four-point flexural

Professional Standard - Machinery, Four-point bending test machine

JB/T 7716-1995 Four-point bending fatigue test method for welded joints

British Standards Institution (BSI), Four-point bending test machine

BS EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Test with specimen supported at two points (four point bending)
18/30356322 DC BS ISO 21914. Test methods for fibre-reinforced cementitious composites. Bending moment-curvature curve by four-point bending test
BS EN 13335:2002 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method
BS ISO 23242:2020 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
19/30375027 DC BS ISO 23242. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
BS EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method
14/30288711 DC BS EN ISO 1288-3. Glass in building. Determination of the bending strength of glass. Part 3. Test with specimen supported at two points (four-point bending)
BS IEC 62047-31:2019 Semiconductor devices. Micro-electromechanical devices - Four-point bending test method for interfacial adhesion energy of layered MEMS materials
BS EN 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations – Test 16c: Contact-bending strength
BS IEC 61747-40-2:2015 Liquid crystal display devices. Mechanical testing of display cover glass for mobile devices. Uniaxial flexural strength (4-point bend)
BS EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of interlaminar shear strength by short span bend test (three points)
BS EN 658-5:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of interlaminar shear strength by short span bend test (three points)

International Organization for Standardization (ISO), Four-point bending test machine

ISO 21914:2019 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
ISO 1288-3:2016 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
ISO 22288:2006 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method
ISO 5402:2002 Leather - Physical and mechanical tests - Determination of flex resistance by flexometer method
ISO 23242:2020 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending

Danish Standards Foundation, Four-point bending test machine

DS/EN 1288-3:2001 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
DS/EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method

Lithuanian Standards Office , Four-point bending test machine

LST EN 1288-3-2002 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
LST EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method (ISO 22288:2006)

AENOR, Four-point bending test machine

UNE-EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)

Association of German Mechanical Engineers, Four-point bending test machine

DVS 3101-2-1999

European Committee for Standardization (CEN), Four-point bending test machine

EN 1288-3:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 3: Test with Specimen Supported at Two Points (Four Point Bending)
EN 13335:2002 Leather - Physical and Mechanical Tests - Determination of Flex Resistance by the Vamp Flex Method
EN 12100:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports
DD ENV 658-5-1993 Advanced technical ceramics; mechanical properties of ceramic composites at room temperature; part 5: determination of shear strength by short span bend test (three-point)

American Society for Testing and Materials (ASTM), Four-point bending test machine

ASTM D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D6272-02(2008)e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-17 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-17e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D5023-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM E2092-00 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-04 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-03 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18a Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D5342-97 Standard Test Method for Resistance to Bending of Paper and Paperboard (Taber-Type Tester in Basic Configuration)
ASTM D5342-97(2002) Standard Test Method for Resistance to Bending of Paper and Paperboard (Taber-Type Tester in Basic Configuration)
ASTM D5342-97(2007) Standard Test Method for Resistance to Bending of Paper and Paperboard (Taber-Type Tester in Basic Configuration)
ASTM E2092-13 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-23 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM C651-91(2005)e1 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM C651-91(2010)e1 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM C651-20 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM C651-11 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM C651-13 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM C651-15 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM D5023-99 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D6272-10 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-02 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-00 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM E2769-13 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-15 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-16 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-22 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-11 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading

Aerospace, Security and Defence Industries Association of Europe (ASD), Four-point bending test machine

ASD-STAN PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending (Edition P1)

KR-KS, Four-point bending test machine

KS M ISO 4666-2-2015 Rubber, vulcanized－Determination of temperature rise and resistance to fatigue in flexometer testing－Part 2：Rotary flexometer
KS M ISO 2493-2-2022 Paper and board — Determination of bending resistance — Part 2: Taber-type tester

Korean Agency for Technology and Standards (KATS), Four-point bending test machine

KS M ISO 5402:2008 Leather-Physical and mechanical tests-Determination of flex resistance by flexometer method
KS M ISO 5402:2013 Leather－Physical and mechanical tests－Determination of flex resistance by flexometer method
KS M ISO 22288:2008 Leather-Physical and mechanical tests-Determination of flex resistance by the vamp flex method
KS M ISO 2493-2:2022 Paper and board — Determination of bending resistance — Part 2: Taber-type tester
KS M ISO 2493-2:2017 Paper and board - Determination of bending resistence-Part2:Taber-type tester

European Association of Aerospace Industries, Four-point bending test machine

AECMA PREN 2591-D16-1992 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part D16 - Contact Bending Strength Issue P 1

Malaysia Standards, Four-point bending test machine

MS 1473-1999 Method of test for measuring the dynamic mechanical properties of plastics using three point bending

International Electrotechnical Commission (IEC), Four-point bending test machine

IEC 62047-31:2019 Semiconductor devices - Micro-electromechanical devices - Part 31: Four-point bending test method for interfacial adhesion energy of layered MEMS materials
IEC 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength
IEC 61747-40-2:2015 Liquid crystal display devices - Part 40-2: Mechanical testing of display cover glass for mobile devices - Uni-axial flexural strength (4-point bend)
IEC 60512-16-14:2008 Connectors for electronic equipment - Tests and measurements - Part 16-14: Mechanical tests on contacts and terminations - Test 16n: Bending strength, fixed male tabs
IEC 60512-16-16:2008 Connectors for electronic equipment - Tests and measurements - Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength, fixed male tabs

YU-JUS, Four-point bending test machine

JUS N.R4.461-1990 Electromechanicai components for electronic equipment. Test methods. Test 16c: Contact bending strength

European Committee for Electrotechnical Standardization（CENELEC）, Four-point bending test machine

EN 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength
EN 60512-16-14:2008 Connectors for electronic equipment - Tests and measurements - Part 16-14: Mechanical tests on contacts and terminations - Test 16n: Bending strength, fixed male tabs

IEC - International Electrotechnical Commission, Four-point bending test machine

IEC 62047-31:2017 Semiconductor devices – Micro-electromechanical devices – Part 31: Four-point bending test method for interfacial adhesion energy of layered MEMS materials (Edition 1.0)

BR-ABNT, Four-point bending test machine

ABNT NBR 15669-2 Versão Corrigida-2009 Implants for surgry - Pins for use with external fixation devices Part 2: Test method for determining the static four poinbt bending properties