ZH

RU

ES

Infrared spectrum standard peak

Infrared spectrum standard peak, Total:353 items.

In the international standard classification, Infrared spectrum standard peak involves: Petroleum products in general, Medical sciences and health care facilities in general, Optics and optical measurements, Lamps and related equipment, Paints and varnishes, Analytical chemistry, Optoelectronics. Laser equipment, Rubber, Semiconductor devices, Fuels, Lubricants, industrial oils and related products, Rubber and plastics products, Plastics, Air quality, Products of the chemical industry, Aerospace electric equipment and systems, On-board equipment and instruments, Photography, Beverages, Water quality, Information sciences. Publishing, Metrology and measurement in general, Raw materials for rubber and plastics, Medical equipment, Semiconducting materials, Coatings and related processes used in aerospace industry, Non-destructive testing, Nuclear energy engineering, Burners. Boilers, Non-ferrous metals.


Military Standard of the People's Republic of China-General Armament Department, Infrared spectrum standard peak

American Society for Testing and Materials (ASTM), Infrared spectrum standard peak

  • ASTM E2224-18 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM E2224-19 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM D3414-98(2011)e1 Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy
  • ASTM E2937-18 Standard Guide for Using Infrared Spectroscopy in Forensic Paint Examinations
  • ASTM D3414-98 Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy
  • ASTM D3414-98(2004) Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy
  • ASTM E2937-13 Standard Guide for Using Infrared Spectroscopy in Forensic Paint Examinations
  • ASTM E2224-10 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM E932-89(2002) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM E932-89(1997) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM E3085-17 Standard Guide for Fourier Transform Infrared Spectroscopy in Forensic Tape Examinations
  • ASTM E932-89(2021) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM E932-89(2013) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM E2224-22 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM E2224-23 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM E2224-23a Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM D3677-10(2015) Standard Test Methods for Rubber&x2014;Identification by Infrared Spectrophotometry
  • ASTM E2224-02 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM E1252-98(2007) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
  • ASTM E2224-23ae1 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM E932-89(2007) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM E2106-00(2011) Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses
  • ASTM D4053-04(2009) Standard Test Method for Benzene in Motor and Aviation Gasoline by Infrared Spectroscopy
  • ASTM D7889-21 Standard Test Method for Field Determination of In-Service Fluid Properties Using IR Spectroscopy
  • ASTM D4053-04 Standard Test Method for Benzene in Motor and Aviation Gasoline by Infrared Spectroscopy
  • ASTM D788-16 Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds
  • ASTM E2310-04(2015) Standard Guide for Use of Spectral Searching by Curve Matching Algorithms with Data Recorded Using Mid-Infrared Spectroscopy
  • ASTM E1252-98 Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
  • ASTM E1252-98(2002) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
  • ASTM E1252-98(2021) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
  • ASTM E2105-00(2016) Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR)
  • ASTM E1252-98(2013)e1 Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
  • ASTM E2310-04 Standard Guide for Use of Spectral Searching by Curve Matching Algorithms with Data Recorded Using Mid-infrared Spectroscopy
  • ASTM E2106-00(2019) Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses
  • ASTM F3416-21 Standard Guide for Using Fourier Transform Infrared Spectrometry to Evaluate Synthetic Equine Surface Components
  • ASTM D3677-10 Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry
  • ASTM E2106-00 Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses
  • ASTM E2106-00(2006) Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses
  • ASTM D6645-01(2010) Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
  • ASTM D3162-21 Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
  • ASTM E827-07 Standard Practice for Identifying Elements by the Peaks in Auger Electron Spectroscopy
  • ASTM E1754-08 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
  • ASTM D6122-99 Standard Practice for Validation of Multivariate Process Infrared Spectrophotometers
  • ASTM D6122-01 Standard Practice for Validation of Multivariate Process Infrared Spectrophotometers
  • ASTM D6122-09 Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers
  • ASTM D6342-12(2017)e1 Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy
  • ASTM C1842-16 Standard Test Method for The Analysis of Boron and Silicon in Uranium Hexfluoride via Fourier-Transform Infrared (FTIR) Spectroscopy
  • ASTM D8290-20 Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Aviation Turbine Fuel using Mid-Infrared Laser Spectroscopy
  • ASTM D3677-00(2004) Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry
  • ASTM D3677-00 Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry
  • ASTM D3677-10(2019) Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry
  • ASTM E1642-00(2005) Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
  • ASTM E1642-00 Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
  • ASTM D8290-22 Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Aviation Turbine Fuel using Mid-Infrared Laser Spectroscopy
  • ASTM D3162-12(2020) Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
  • ASTM E1915-05 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry
  • ASTM D6277-01 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
  • ASTM D6277-99 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
  • ASTM E1915-99 Standard Test Method for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry
  • ASTM E1915-01 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry
  • ASTM D6277-01(2006) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
  • ASTM D6277-07(2017) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
  • ASTM E827-95 Standard Practice for Indentifying Elements by the Peaks in Auger Electron Spectroscopy
  • ASTM E827-02 Standard Practice for Indentifying Elements by the Peaks in Auger Electron Spectroscopy
  • ASTM D6122-06 Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers
  • ASTM D6122-06e1 Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers
  • ASTM E958-13(2021) Standard Practice for Estimation of the Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
  • ASTM E1642-00(2010) Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
  • ASTM E1642-00(2016) Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
  • ASTM E1915-07a Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared-Absorption Spectrometry
  • ASTM D6277-07(2022) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
  • ASTM D6342-22 Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy
  • ASTM D3162-12 Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
  • ASTM D5576-00(2013) Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)
  • ASTM E1982-98(2007) Standard Practice for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air
  • ASTM D7678-11 Standard Test Method for Total Petroleum Hydrocarbons (TPH) in Water and Wastewater with Solvent Extraction using Mid-IR Laser Spectroscopy
  • ASTM E29-90 Standard Practice for Using Digits in Test Data to Determine Conformance with Specifications
  • ASTM E29-93a(1999) Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
  • ASTM E2999-17 Standard Test Method for Analysis of Organic Compounds in Smokeless Powder by Gas Chromatography-Mass Spectrometry and Fourier Transform Infrared Spectroscopy
  • ASTM D5477-02 Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)
  • ASTM D5477-95 Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)
  • ASTM D5845-21 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy
  • ASTM D5845-01(2016) Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy
  • ASTM E2193-16 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry)
  • ASTM D6348-98 Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
  • ASTM D6277-07 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
  • ASTM D5845-01(2006) Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy
  • ASTM D5845-95(2000)e1 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy
  • ASTM D5845-01 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy
  • ASTM D7418-07 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
  • ASTM D6277-07(2012) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
  • ASTM D5477-11 Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)
  • ASTM D6348-12 Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
  • ASTM D7653-18 Standard Test Method for Determination of Trace Gaseous Contaminants in Hydrogen Fuel by Fourier Transform Infrared (FTIR) Spectroscopy
  • ASTM D6348-12(2020) Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
  • ASTM D5477-18 Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)
  • ASTM D2124-99e1 Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
  • ASTM E1754-95(2001)e1 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
  • ASTM E1754-95 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
  • ASTM D2124-99(2004) Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
  • ASTM D2124-99(2011) Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
  • ASTM E958-13 Standard Practice for Estimation of the Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
  • ASTM D3133-01 Standard Test Method for Quantitative Determination of Cellulose Nitrate in Alkyd Modified Lacquers by Infrared Spectrophotometry
  • ASTM E1915-07 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared-Absorption Spectrometry
  • ASTM D3162-94(2000)e1 Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
  • ASTM D3162-94(2005) Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
  • ASTM D7418-12 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
  • ASTM D7948-20 Standard Test Method for Measurement of Respirable Crystalline Silica in Workplace Air by Infrared Spectrometry
  • ASTM D3133-01(2005) Standard Test Method for Quantitative Determination of Cellulose Nitrate in Alkyd Modified Lacquers by Infrared Spectrophotometry
  • ASTM D7948-14 Standard Test Method for Measurement of Respirable Crystalline Silica in Workplace Air by Infrared Spectrometry
  • ASTM D7948-14e1 Standard Test Method for Measurement of Respirable Crystalline Silica in Workplace Air by Infrared Spectrometry
  • ASTM E275-01 Standard Practice for Describing and Measuring Performance of Ultraviolet, Visible, and Near-Infrared Spectrophotometers
  • ASTM E275-93 Standard Practice for Describing and Measuring Performance of Ultraviolet, Visible, and Near-Infrared Spectrophotometers
  • ASTM D7417-17 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
  • ASTM D7418-20 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
  • ASTM D7418-12(2019) Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
  • ASTM D7418-21 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
  • ASTM D7653-10 Standard Test Method for Determination of Trace Gaseous Contaminants in Hydrogen Fuel by Fourier Transform Infrared (FTIR) Spectroscopy
  • ASTM D7418-22 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
  • ASTM E958-93(1999) Standard Practice for Measuring Practical Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
  • ASTM E1786-96 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
  • ASTM E1786-02 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
  • ASTM E1786-08 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
  • ASTM E1754-17 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
  • ASTM E1754-17a Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
  • ASTM E204-98 Standard Practices for Identification of Material by Infrared Absorption Spectroscopy, Using the ASTM Coded Band and Chemical Classification Index
  • ASTM D7371-12 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
  • ASTM E2412-10(2018) Standard Practice for Condition Monitoring of Used Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM E1421-99(2021) Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers: Level Zero and Level One Tests
  • ASTM D6348-03 Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
  • ASTM D7371-14(2022) Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
  • ASTM E204-98(2002) Standard Practices for Identification of Material by Infrared Absorption Spectroscopy, Using the ASTM Coded Band and Chemical Classification Index
  • ASTM D7678-17(2022) Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbons (TPH) in Water and Wastewater with Solvent Extraction using Mid-IR Laser Spectroscopy
  • ASTM D7678-17 Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbons (TPH) in Water and Wastewater with Solvent Extraction using Mid-IR Laser Spectroscopy
  • ASTM D7417-10 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
  • ASTM D3124-98(2003) Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM D6248-98 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM D3124-98 Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM D6248-98(2004) Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM D3124-98(2019) Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM E2412-23 Standard Practice for Condition Monitoring of In-Service Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM D6342-12 Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy
  • ASTM D6122-21 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
  • ASTM D6122-20a Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
  • ASTM D6122-20 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
  • ASTM D6122-22 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
  • ASTM E925-09(2022) Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Bandwidth does not Exceed 2 nm
  • ASTM F2381-19 Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High Molecular Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy
  • ASTM D5576-00 Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectroscopy (FT-IR)
  • ASTM E1421-99 Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers Level Zero and Level One Tests
  • ASTM D5576-00(2006) Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)
  • ASTM F1619-95(2000)e1 Standard Test Method for Measurement of Interstitial Oxygen Content of Silicon Wafers by Infrared Absorption Spectroscopy with p-Polarized Radiation Incident at the Brewster Angle
  • ASTM E1421-99(2004) Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers: Level Zero and Level One Tests
  • ASTM E1421-99(2009) Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers: Level Zero and Level One Tests
  • ASTM D7418-23 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
  • ASTM E204-98(2007) Standard Practices for Identification of Material by Infrared Absorption Spectroscopy, Using the ASTM Coded Band and Chemical Classification Index
  • ASTM E1944-98(2021) Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests
  • ASTM D7371-14 Standard Test Method for Determination of Biodiesel &40;Fatty Acid Methyl Esters&41; Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy &40;FTIR-ATR-PLS Method&41;
  • ASTM E1421-99(2015)e1 Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers: Level Zero and Level One Tests
  • ASTM E1786-17 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
  • ASTM E1786-17a Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
  • ASTM F1864-21 Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
  • ASTM F1864-16 Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
  • ASTM F1864-05 Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
  • ASTM D7806-12 Standard Test Method for Determination of the Fatty Acid Methyl Ester (FAME) Content of a Blend of Biodiesel and Petroleum-Based Diesel Fuel Oil Using Mid-Infrared Spectroscopy
  • ASTM D7861-14(2019) Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Diesel Fuel by Linear Variable Filter (LVF) Array Based Mid-Infrared Spectroscopy
  • ASTM E925-83(1994)e1 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm
  • ASTM F2381-04 Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy
  • ASTM F1864-98 Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
  • ASTM E2193-04 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
  • ASTM E2193-02a Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
  • ASTM E2193-02 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
  • ASTM E2193-08 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
  • ASTM D5670-95(2009) Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
  • ASTM E925-02 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm
  • ASTM E925-09 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm
  • ASTM D7371-07 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
  • ASTM D7844-22 Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM D7844-22a Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM D6645-01 Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
  • ASTM D3133-96 Standard Test Method for Quantitative Determination of Cellulose Nitrate in Alkyd Modified Lacquers by Infrared Spectrophotometry
  • ASTM D6645-18 Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
  • ASTM D6248-21 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM E925-09(2014) Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Bandwidth does not Exceed 2 nm
  • ASTM E2412-10 Standard Practice for Condition Monitoring of Used Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM D7806-20 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Ester) and Triglyceride Content in Diesel Fuel Oil Using Mid-Infrared Spectroscopy (FTIR Transmission Method)
  • ASTM F1864-05(2010) Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
  • ASTM F2381-10 Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy
  • ASTM D3124-98(2011) Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM G177-03(2020) Standard Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37° Tilted Surface
  • ASTM D7861-14 Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Diesel Fuel by Linear Variable Filter (LVF) Array Based Mid-Infrared Spectroscopy
  • ASTM D3900-17 Standard Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
  • ASTM C1441-99 Standard Test Method for the Analysis of Refrigerant 114, Plus Other Carbon-Containing and Fluorine-Containing Compounds in Uranium Hexafluoride via Fourier-Transform Infrared (FTIR) Spectroscopy
  • ASTM E1944-98(2002) Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests
  • ASTM E1944-98 Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests
  • ASTM E2412-04 Standard Practice for Condition Monitoring of Used Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM E1944-98(2007) Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests
  • ASTM D5594-18 Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)
  • ASTM D7844-21 Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM E1944-98(2013) Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests
  • ASTM F2778-09(2015) Standard Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR)
  • ASTM F1619-95(2000) Standard Test Method for Measurement of Interstitial Oxygen Content of Silicon Wafers by Infrared Absorption Spectroscopy with p-Polarized Radiation Incident at the Brewster Angle
  • ASTM D8193-18 Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbon (TPH) in Water and Wastewater with Solvent Extraction Using Non-Dispersive Mid-IR Transmission Spectroscopy
  • ASTM F2778-09(2020) Standard Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR)
  • ASTM D3900-17(2021) Standard Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
  • ASTM D5594-18a Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)
  • ASTM D7861-14e1 Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Diesel Fuel by Linear Variable Filter (LVF) Array Based Mid-Infrared Spectroscopy
  • ASTM D5670-95(2004)e1 Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
  • ASTM D6248-98(2012)e1 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM C1865-18 Standard Test Method for The Determination of Carbon and Sulfur Content in Plutonium Oxide Powder by the Direct Combustion-Infrared Spectrophotometer
  • ASTM D5576-00(2021)e1 Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)
  • ASTM D5986-96(2006) Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C8-C 12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy
  • ASTM D5986-96(2001) Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C8-C12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy
  • ASTM G130-95(2002) Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
  • ASTM G130-95 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
  • ASTM G130-06 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
  • ASTM G130-12(2020) Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
  • ASTM G177-03(2012) Standard Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37deg; Tilted Surface
  • ASTM D6122-19b Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
  • ASTM D6122-18 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
  • ASTM D6122-19 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
  • ASTM D6122-19a Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
  • ASTM D5670-95(2023) Standard Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
  • ASTM G130-12 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
  • ASTM D7844-20 Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM D7624-18 Standard Test Method for Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM D5594-98 Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)
  • ASTM D3900-95(2000) Standard Test Methods for Rubber Raw-Determination of Ethylene Units in EPM (Ethylene-Propylene Copolymers) and EPDM (Ethylene-Propylene-Diene Terpolymers)
  • ASTM C1441-04 Standard Test Method for the Analysis of Refrigerant 114, Plus Other Carbon-Containing and Fluorine-Containing Compounds in Uranium Hexafluoride via Fourier-Transform Infrared (FTIR) Spectroscopy
  • ASTM D5594-98(2004) Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)
  • ASTM D3900-95(2004)e1 Standard Test Methods for Rubber-Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
  • ASTM E1447-22 Standard Test Method for Determination of Hydrogen in Reactive Metals and Reactive Metal Alloys by Inert Gas Fusion with Detection by Thermal Conductivity or Infrared Spectrometry
  • ASTM D7844-18 Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM C1441-13 Standard Test Method for the Analysis of Refrigerant 114, Plus Other Carbon-Containing and Fluorine-Containing Compounds in Uranium Hexafluoride via Fourier-Transform Infrared (FTIR) Spectroscopy
  • ASTM D7844-12 Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM D5594-98(2012) Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)
  • ASTM D5670-95(2000)e1 Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
  • ASTM D5986-96(2015) Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C8–C 12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform
  • ASTM D5986-96 Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C8-C12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared
  • ASTM D5986-96(2019) Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C8–C12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform
  • ASTM D7399-18 Standard Test Method for Determination of the Amount of Polypropylene in Polypropylene/Low Density Polyethylene Mixtures Using Infrared Spectrophotometry
  • ASTM D5670-95(2019) Standard Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
  • ASTM D5670-95(2014) Standard Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
  • ASTM D7399-08 Standard Test Method for Determination of the Amount of Polypropylene (PP) in Polypropylene/LDPE Mixtures Using Infrared Spectrophotometer (FTIR)
  • ASTM D5902-05(2015) Standard Test Method for Rubber&x2014;Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value
  • ASTM D7414-21 Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM D3900-05 Standard Test Methods for Rubber-Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
  • ASTM D3900-05a Standard Test Methods for Rubber-Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
  • ASTM D7797-18 Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
  • ASTM D7797-23 Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
  • ASTM D7797-17 Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
  • ASTM D7414-22 Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM D7797-16 Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy&x2014;Rapid Screening Method
  • ASTM D7797-16a Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy&x2014;Rapid Screening Method
  • ASTM D6342-98(2003) Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy
  • ASTM D6342-98 Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy
  • ASTM D6342-08 Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy
  • ASTM D6122-10 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
  • ASTM D6122-13 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
  • ASTM D6122-15 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems

Professional Standard - Aviation, Infrared spectrum standard peak

  • HB 5490-1991 Standard Spectrum Atlas of Infrared Spectrum of Aeronautical Non-metallic Materials Commodities

International Organization for Standardization (ISO), Infrared spectrum standard peak

  • ISO 17166:1999 Erythema reference action spectrum and standard erythema dose
  • ISO 11151-2:2000 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range
  • ISO 11151-2:2015 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range
  • ISO/CIE 17166:1999 Erythema reference cation spectrum and standard erythema dose
  • ISO 11151-1:2000 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges
  • ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges

Association Francaise de Normalisation, Infrared spectrum standard peak

  • NF X91-001:2000 Erythema reference action spectrum and standard erythema dose.
  • NF S10-111-2:2001 Lasers and laser-related equipment - Standard optical components - Part 2 : components for the infrared spectral range.
  • NF S10-111-2*NF EN ISO 11151-2:2015 Lasers and laser-related equipment - Standard optical components - Part 2 : components for the infrared spectral range
  • NF S10-111-1*NF EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1 : components for the UV, visible and near-infrared spectral ranges
  • NF EN ISO 11151-2:2015 Lasers et équipements associés aux lasers - Composants optiques standards - Partie 2 : composants pour la plage spectrale infrarouge
  • NF EN ISO 11151-1:2015 Lasers et équipements associés aux lasers - Composants optiques standards - Partie 1 : composants pour les plages spectrales UV, visible et proche de l'infrarouge
  • NF S10-111-1:2001 Laser and laser-related equipment - Standard optical components - Part 1 : components for the UV, visible and near-infrared spectral ranges.
  • NF X43-065*NF EN 14626:2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • NF EN 14626:2012 Air ambiant - Méthode normalisée de mesurage de la concentration en monoxyde de carbone par spectroscopie à rayonnement infrarouge non dispersif
  • NF X43-374*NF EN 15058:2017 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method : non-dispersive infrared spectrometry
  • NF EN 15058:2017 Émissions de sources fixes - Détermination de la concentration massique de monoxyde de carbone - Méthode de référence normalisée : spectrométrie infrarouge non dispersive
  • NF X43-374:2006 Stationary source emissions - Determination of the mass concentration of carbon monoxide (CO) - Reference method : non-dispersive infrared spectrometry.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Infrared spectrum standard peak

  • GB/T 20150-2023 Erythema baseline action spectrum and standard erythema dose
  • GB/T 20150-2006 Erythema reference action spectrum and standard erythema dose
  • GB/T 21005-2007 UV erythema reference action spectrum,standard erythema dose and UV index

National Metrological Technical Specifications of the People's Republic of China, Infrared spectrum standard peak

  • JJF 1750-2019 Calibration Specification for Infrared Standard Filter
  • JJF 1319-2011 Calibration Specification for Fourier Transform Infrared Spectrometers

British Standards Institution (BSI), Infrared spectrum standard peak

  • BS EN ISO 11151-2:2000 Lasers and laser-related equipment. Standard optical components. Components for the infrared spectral range
  • BS EN ISO 11151-2:2015 Lasers and laser-related equipment. Standard optical components. Components for the infrared spectral range
  • BS ISO 17166:2000 Erythema reference action spectrum and standard erythema dose
  • BS EN ISO 11151-1:2000 Lasers and laser-related equipment. Standard optical components. Components for the UV, visible and near-infrared spectral ranges
  • BS EN ISO 11151-1:2015 Lasers and laser-related equipment. Standard optical components. Components for the UV, visible and near-infrared spectral ranges
  • BS 3985:2003 Haemiglobincyanide (cyanmethaemoglobin) preparation as a standard for spectrometric haemoglobinometry
  • BS EN 14626:2012 Ambient air. Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • BS EN 14626:2005 Ambient air quality - Standard method for the measurement of the concentration of carbon monoxide by nondispersive infrared spectroscopy
  • 22/30450999 DC BS EN 14626. Ambient air. Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • BS EN 15058:2017 Tracked Changes. Stationary source emissions. Determination of the mass concentration of carbon monoxide. Standard reference method: non-dispersive infrared spectrometry

Professional Standard - Electron, Infrared spectrum standard peak

  • SJ 2658.12-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for peak emission wavelength and spectral half width
  • SJ/T 2658.12-2015 Measuring method for semiconductor infrared-emitting diode.Part 12: Peak-emission wavelength and spectral radiant bandwidth

Korean Agency for Technology and Standards (KATS), Infrared spectrum standard peak

  • KS B ISO 11151-2:2003 Lasers and laser-related equipment-Standard optical components-Part 2:Components for the infrared spectral range
  • KS B ISO 11151-2:2013 Lasers and laser-related equipment ?; Standard optical components ?; Part 2: Components for the infrared spectral range
  • KS B ISO 11151-2:2015 Lasers and laser-related equipment ― Standard optical components ― Part 2: Components for the infrared spectral range
  • KS B ISO 11151-1:2013 Lasers and laser-related equipment ?; Standard optical components ?; Part 1: Components for the UV, visible and near-infrared spectral ranges
  • KS B ISO 11151-1:2003 Lasers and laser-related equipment-Standard optical components-Part 1:Components for the UV, visible and near-infrared spectral ranges
  • KS B ISO 11151-1:2015 Lasers and laser-related equipment ― Standard optical components ― Part 1: Components for the UV, visible and near-infrared spectral ranges
  • KS B ISO 11151-2-2015(2020) Lasers and laser-related equipment ― Standard optical components ― Part 2: Components for the infrared spectral range
  • KS B ISO 11151-1-2015(2020) Lasers and laser-related equipment ― Standard optical components ― Part 1: Components for the UV, visible and near-infrared spectral ranges

German Institute for Standardization, Infrared spectrum standard peak

  • DIN EN ISO 11151-2:2000 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2000); German version EN ISO 11151-2:2000
  • DIN EN ISO 11151-1:2000 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the ultraviolet, visible and near-infrared spectral range (ISO 11151-1:2000); German version EN ISO 11151-1:2000
  • DIN EN ISO 11151-2:2015-12 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2015); German version EN ISO 11151-2:2015
  • DIN EN ISO 11151-1:2015-12 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015); German version EN ISO 11151-1:2015
  • DIN EN 14626:2022-11 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy; German and English version prEN 14626:2022 / Note: Date of issue 2022-09-30*Intended as replacement for DIN EN 14626 (201...
  • DIN EN 14626:2012-12 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy; German version EN 14626:2012 / Note: To be replaced by DIN EN 14626 (2022-11).
  • DIN EN ISO 11151-2:2015 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2015); German version EN ISO 11151-2:2015
  • DIN EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015); German version EN ISO 11151-1:2015
  • DIN EN 15058:2017-05 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry; German version EN 15058:2017
  • DIN EN 14626:2012 Ambient air.Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy; German version EN 14626:2012
  • DIN EN 15058:2017 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry; German version EN 15058:2017

International Commission on Illumination (CIE), Infrared spectrum standard peak

  • CIE S 007/E-1998 Erythema Reference Action Spectrum and Standard Erythema Dose (ISO 17166: 1999)

European Committee for Standardization (CEN), Infrared spectrum standard peak

  • EN ISO 11151-2:2000 Lasers and Laser-Related Equipment - Standard Optical Components - Part 2: Components for the Infrared Spectral Range ISO 11151-2: 2000
  • EN ISO 11151-1:2000 Lasers and Laser-Related Equipment - Standard Optical Components - Part 1: Components for the UV, Visible and Near-Infrared Spectral Ranges ISO 11151-1: 2000
  • EN ISO 11151-2:2015 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2015)
  • EN 14626:2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015)
  • EN 14626:2005 Ambient air quality - Standard method for the measurement of the concentration of carbon monoxide by nondispersive infrared spectroscopy
  • EN 15058:2017 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry

Hebei Provincial Standard of the People's Republic of China, Infrared spectrum standard peak

  • DB13/T 2953-2019 Determination of styrene content in styrene-butadiene rubber by infrared spectroscopic external standard method

Danish Standards Foundation, Infrared spectrum standard peak

  • DS/EN ISO 11151-1:2000 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges
  • DS/EN ISO 11151-2:2000 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range
  • DS/EN 14626:2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy

ES-UNE, Infrared spectrum standard peak

  • UNE-EN ISO 11151-2:2015 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2015)
  • UNE-EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015)

国家市场监督管理总局、中国国家标准化管理委员会, Infrared spectrum standard peak

  • GB/T 37396.2-2019 Lasers and laser-related equipment—Standard optical components—Part 2: Components for the infrared spectral ranges
  • GB/T 37396.1-2019 Lasers and laser-related equipment—Standard optical components—Part 1: Components for the UV,visible and near-infrared spectral ranges

SAE - SAE International, Infrared spectrum standard peak

Lithuanian Standards Office , Infrared spectrum standard peak

  • LST EN ISO 11151-2:2002 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2000)
  • LST EN ISO 11151-1:2002 Laser and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2000)
  • LST EN ISO 11151-2:2015 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2015)
  • LST EN 14626-2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy

Professional Standard - Meteorology, Infrared spectrum standard peak

  • QX/T 206-2013 Calculation Method of Performance Index of Satellite Low Spectral Resolution Infrared Instrument

AENOR, Infrared spectrum standard peak

  • UNE-EN 14626:2013 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • UNE-EN 15058:2017 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry

Society of Automotive Engineers (SAE), Infrared spectrum standard peak

  • SAE AS6129-2012 AS6129: Interface Standard, Airborne EO/IR Systems, Electrical
  • SAE AS6165-2012 Interface Standard, Airborne EO/IR Systems, Maintenance and Test

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Infrared spectrum standard peak

  • GB/T 35927-2018 Standard practice for identification of polymer layers or inclusions by fourier transform infrared microspectroscopy

RU-GOST R, Infrared spectrum standard peak

  • GOST R 59422.1-2021 Optics and photonics. Lasers and laser-related equipment. Standard optical elements. Part 1. Standard optical elements for laser equipment operating in the ultraviolet, visible and near-infrared spectral ranges. General technical requirements
  • GOST R 59422.2-2021 Optics and photonics. Lasers and laser-related equipment. Standard optical elements. Part 2. Standard optical elements for laser equipment operating in the infrared spectral range. General technical requirements
  • GOST 32338-2013 Gasolines. Determination of MTBE, ETBE, TAME, DIPE, methanol, ethanol and tert-butanol by method of infra-red spectroscopy

American National Standards Institute (ANSI), Infrared spectrum standard peak

  • ANSI/ASTM D8290:2020 Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Aviation Turbine Fuel using Mid-Infrared Laser Spectroscopy

Group Standards of the People's Republic of China, Infrared spectrum standard peak

  • T/HBFIA 0020-2021 Rapid determination of indicators of Laobaigan-flavored fermented grains by near-infrared spectroscopic analysis

未注明发布机构, Infrared spectrum standard peak

  • BS 3985:2003(2008) Haemiglobincyanide (cyanmethaemoglobin) preparation as a standard for spectrometric haemoglobinometry

Yunnan Provincial Standard of the People's Republic of China, Infrared spectrum standard peak

  • DB53/T 498-2013 Determination of main chemical constituents of tobacco and tobacco products Near-infrared diffuse reflectance spectrometry

Professional Standard - Medicine, Infrared spectrum standard peak

  • YY/T 0814-2010 tandard test method for evaluating trans-vinylene yield in irradiated ultra-high-molecular-weight polyethylene fabricated forms intended for surgical implants by infrared spectroscopy

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Infrared spectrum standard peak

  • GJB 6238.8-2008 Test method fo effect for special serial bomb. Part 8: Infrared radiation intensity for target flare of aerial target bomb. Spectral analytics method

International Telecommunication Union (ITU), Infrared spectrum standard peak

  • ITU-R REPORT SM.2048-2004 Use of the x dB bandwidth criterion for determination of spectral properties of a transmitter in the out-of-band domain




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved