ZH
RU
ES
Sealing test
Sealing test, Total:142 items.
In the international standard classification, Sealing test involves: Vacuum technology, Commercial vehicles, Nuclear energy engineering, Radiation protection, Internal combustion engines, Environmental testing, Agricultural machines, implements and equipment, Road vehicle systems, Passenger cars. Caravans and light trailers, Lifting equipment, Non-destructive testing, Railway rolling stock, Transformers. Reactors, Pipeline components and pipelines, Valves, Test conditions and procedures in general, Installations in buildings, Fluid power systems, Packaging and distribution of goods in general, Rubber and plastics products, Aerospace electric equipment and systems, Electromechanical components for electronic and telecommunications equipment, Non-metalliferous minerals, Seals, glands, Terminology (principles and coordination), Cans. Tins. Tubes, Road vehicles in general, Freight distribution of goods, Glass.
International Organization for Standardization (ISO), Sealing test
- ISO 27895:2009 Vacuum technology - Valves - Leak test
- ISO 13056:2011 Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum
- ISO/DIS 5119 Low temperature sealing capability of elastomeric seals — Test methods
- ISO 8639:2000 Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness of flexible joints
- ISO 8639:2003 Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods for leaktightness and proof of structural design of flexible joints
- ISO 8639:2023 Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods for leaktightness and proof of structural design of flexible joints
- ISO 13255:2010 Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints
- ISO 13259:2020 Thermoplastics piping systems for underground non-pressure applications — Test method for leaktightness of elastomeric sealing ring type joints
British Standards Institution (BSI), Sealing test
- BS ISO 27895:2010 Vacuum technology. Valves. Leak test
- BS ISO 27895:2009 Vacuum technology - Valves - Leak test
- BS EN ISO 13056:2018 Plastics piping systems. Pressure systems for hot and cold water. Test method for leaktightness under vacuum
- BS EN ISO 13259:2020 Thermoplastics piping systems for underground non-pressure applications. Test method for leaktightness of elastomeric sealing ring type joints
- BS EN ISO 3459:2015 Plastic piping systems. Mechanical joints between fittings and pressure pipes. Test method for leaktightness under negative pressure
- BS EN ISO 3458:2015 Plastics piping systems. Mechanical joints between fittings and pressure pipes. Test method for leaktightness under internal pressure
- 21/30429636 DC BS EN ISO 3459. Plastic piping systems. Mechanical joints between fittings and pressure pipes. Test method for leak tightness under negative pressure
- 22/30447030 DC BS ISO 8639. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods for leaktightness and proof of structural design of flexible joints
- BS EN ISO 13845:2015 Tracked Changes. Plastics piping systems. Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes. Test method for leaktightness under internal pressure and with angular deflection
- BS EN 1680:1997 Plastics piping systems. Valves for polyethylene (PE) piping systems. Test method for leaktightness under and after bending applied to the operating mechanism
- BS EN ISO 13844:2015 Plastics piping systems. Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes. Test method for leaktightness under negative pressure, angular deflection and deformation
- BS EN 1277:2004 Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints
- BS EN 1277:2003 Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints
- BS EN ISO 13844:2000 Plastics piping systems - Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Sealing test
- GB/T 12478-1990 Dust proof performance--Test method for buses
- GB/T 12480-1990 Rain proof performance test method for buses
- GB/T 24645-2009 Slush seal performance of tractors.Test procedures
- GB/T 15171-1994 Test method for leaks in sealed flexible packages
- GB/T 12385-1990 Test method for sealing characteristics of gaskets for pipe flanges
- GB/T 12385-2008 Test method for sealing performance of gaskets for pipe flanges
- GB/T 5095.7-1997 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 7: Mechanical operating tests and sealing tests
- GB/T 20671.4-2006 Classification system and test methods for nonmetallic gasket materials-Part4:Standard test method for sealability of gasket materials
- GB/T 15520-1995 Test method for steam tightness of asbestos-rubber sheets
- GB/T 4620-1984 Spiral wound gaskets test method of hydraulic pressure sealing characteristics
- GB/T 4621-1984 Spiral wound gaskets test method of steam sealing characteristics
- GB/T 14273-1993 Rotary shaft lip type seals-Performance test proceduces
Professional Standard - Energy, Sealing test
- NB/T 20018-2010 Containment leaktightness test for nuclear power plants
- NB/T 20018-2021 Containment tightness test of pressurized water reactor nuclear power plant
IN-BIS, Sealing test
Association Francaise de Normalisation, Sealing test
- NF M61-003:1992 Radiation protection. Sealed radioactive sources. Leakage test methods.
- NF A09-491:1989 Non destructive testing. Tightness testing. Testing by accumulation or sniffing of gas.
- NF A09-492:1989 Non destructive testing. Tightness testing. Method under vacuum with tracer gras.
- NF T54-941*NF EN ISO 13056:2018 Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum
- NF EN ISO 13056:2018 Systèmes de canalisations en plastique - Systèmes pour installation d'eau chaude et froide sous pression - Méthode d'essai de l'étanchéité sous vide
- NF EN 3745-501:2006 Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 501 : essai d'étanchéité de la fibre optique
- NF EN ISO 3459:2022 Systèmes de canalisations en matières plastiques - Assemblages mécaniques entre raccords et tubes sous pression - Méthode d'essai pour l'étanchéité sous pression négative
- NF EN ISO 3458:2015 Systèmes de canalisations en plastique - Assemblages mécaniques entre raccords et tubes sous pression - Méthode d'essai pour l'étanchéité sous pression interne
- NF T54-012:2015 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure
- NF T54-012*NF EN ISO 3459:2022 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure
- NF A09-493:1990 Non destructive testing. Tightness testing. Recommended practices for testing by vacuum dye penetration by means of helium.
- NF T54-010:1994 Thermoplastics piping systems. End-load bearing joints between small diameter pressure pipes and fittings. Test method for leaktightness under internal water pressure, including end thrust.
Professional Standard - Machinery, Sealing test
Taiwan Provincial Standard of the People's Republic of China, Sealing test
- CNS 3631-1993 Basic Environmental Testing Procedures Part 2: Tests - Test Q: Sealing
Japanese Industrial Standards Committee (JISC), Sealing test
Professional Standard - Automobile, Sealing test
工业和信息化部, Sealing test
Professional Standard - Nuclear Industry, Sealing test
- EJ/T 589-1999 Containment leaktightness test for pressurized water reactor of nuclear power plant
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Sealing test
- GJB 3196.2A-2005 Test methods of cartridge.Part 2:Leakage test of cartridge
- GJB 5389.6-2005 Test method of gun-launched missile Part 6:Seal test
- GJB 5491.11-2005 Test method of terminally guided projectile Part 11:Leakage test
- GJB 5895.10-2006 Test method for anti-tank missile Part 10: Sealing test
- GJB 3196.9A-2005 Test methods of cartridge.Part 9:Leakage test of packing iron box.Inflatable method
- GJB 6458.35-2008 Test method of rocket launcher. Part 35: Sealing test of non-metallic launching tube
- GJB 3196.10A-2005 Test methods of cartridge.Part 10:Leakage test of packing iron box-Vacuum pumping method
Professional Standard - Aviation, Sealing test
- HB 5313-1993 Test method for liquid tightness of anaerobic adhesives used in aviation
工业和信息化部/国家能源局, Sealing test
- JB/T 13555-2018 Test method for cylinder sealing of reciprocating internal combustion engines
Military Standard of the People's Republic of China-General Armament Department, Sealing test
- GJB 8685.6-2015 Gun-launched missile test methods Part 6: Sealing test
- GJB 8701.10-2015 Anti-tank missile test methods Part 10: Sealing test
- GJB 350.12-1987 Surface combat ship mooring and navigation test procedures cabin protection sealing test
- GJB 785.2-1989 Performance test methods for unvulcanized rubber sealants Density test
National Metrological Verification Regulations of the People's Republic of China, Sealing test
- JJG(机械) 14-1990 Verification rules for household gas meter sealing test device
Group Standards of the People's Republic of China, Sealing test
Professional Standard - Petroleum, Sealing test
- SY/T 0074-1993 Standard Test Method for Insulating and Sealing Effectiveness of Joint in Coating Pipelines
- SY/T 0074-1993(条文说明) Standard Test Method for Insulating and Sealing Effectiveness of Joint in Coating Pipelines
Henan Provincial Standard of the People's Republic of China, Sealing test
- DB41/T 1896-2019 Specification for tightness test of reducer for wire rope electric hoist
中国石油天然气总公司, Sealing test
- SY 0074-1993 Standard test method for pipe anti-corrosion coating insulation sealing
Professional Standard - Railway, Sealing test
- TB/T 1715-2006 Technical specification of pressure testing experiment for plunger and barred assembly of locomotive diesel engine
- TB/T 1841-1987 Dongfeng 4 type locomotive plunger couple leak test technical conditions
Professional Standard - Electricity, Sealing test
- DL/T 264-2012 Guide for field sealing test of oil immersed power transformer
Danish Standards Foundation, Sealing test
- DS/EN 12294:2000 Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum
- DS/EN 12377:1999 Packaging - Flexible tubes - Test method for the airtightness of closures
- DS/EN 713:1995 Plastics piping systems - Mechanical joints between fittings and polyolefin pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending
Lithuanian Standards Office , Sealing test
- LST EN 12294-2002 Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum
- LST EN 12377-2001 Packaging - Flexible tubes - Test method for the air tightness of closures
- LST EN 713-2002 Plastics piping systems - Mechanical joints between fittings and polyolefin pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending
German Institute for Standardization, Sealing test
- DIN EN 917:1997 Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness; German version EN 917:1997
- DIN EN 2591-322:1998 Aerospace series - Elements of electrical and optical connection; test methods - Part 322: Hermeticity; German version EN 2591-322:1998
- DIN EN ISO 3459:2022-07 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure (ISO 3459:2022); German and English version EN ISO 3459:2022
- DIN EN ISO 3458:2015-08 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure (ISO 3458:2015); German and English version EN ISO 3458:2015
- DIN EN 1680:1997 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism; German version EN 1680:1997
- DIN EN 1680:1997-03 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism; German version EN 1680:1997
Korean Agency for Technology and Standards (KATS), Sealing test
- KS B ISO 3056:2005 Non-calibrated round steel link lifting chain and chain slings-Use and maintenance
- KS B ISO 3056:2013 Non－calibrated round steel link lifting chain and chain slings－Use and maintenance
- KS M 7137-2006 Testing methods for sealed flexible packages
- KS M ISO 3458:2019 Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for leak tightness under internal pressure
- KS M ISO 13846-2012(2017) Plastics piping systems－End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping－Test method for long-term leaktightness under internal water pressure
- KS M ISO 13846-2012(2022) Plastics piping systems－End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping－Test method for long-term leaktightness under internal water pressure
RU-GOST R, Sealing test
- GOST 24054-1980 Engineering and instrument production items. Leak detection methods. General requirements
- GOST R 55876-2017 Fiberglass-reinforced thermosetting plastic pipes and parts of pipelines. Test methods for leaktightness of flexible joints
CEN - European Committee for Standardization, Sealing test
- EN ISO 13056:2018 Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum
PL-PKN, Sealing test
- PN-EN ISO 13259-2021-01 E Thermoplastics piping systems for underground non-pressure applications--Test method for leaktightness of elastomeric sealing ring type joints (ISO 13259:2020)
GM Daewoo, Sealing test
Professional Standard - Water Conservancy, Sealing test
- SL/T 71-1994 Test method of leakproofness under internal pressure of joints between polyethylene (PE) fittings and pipes for micro-irrigation
Professional Standard - Chemical Industry, Sealing test
Canadian General Standards Board （CGSB), Sealing test
- CGSB 1-GP-71 METH 123.2-1979 Methodes D'Essai Des Peintures Et Pigments Caracteristiques De Scellement Modifiee En Septembre 1980; Reeditee En Septembre 1982
GOSTR, Sealing test
- GOST R ISO 3458-2020 Plastis piping systems. Mechanical joints between fittings and pressure pipes. Test method for leak tightness under internal pressure
- GOST R 59111-2020 Plastic piping systems. Mechanical joints between fittings and pressure pipes. Test method for leak tightness under negative pressure
- GOST R ISO 13844-2020 Plastic piping systems. Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes. Test method for leak tightness under negative pressure, angular deflection and deformation
- GOST R ISO 3503-2020 Plastic piping systems. Mechanical joints between fittings and pressure pipes. Test method for leak tightness under internal pressure of assemblies subjected to bending
- GOST R ISO 13845-2020 Plastic piping systems. Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes. Test method for leak tightness under internal pressure and with angular deflection
KR-KS, Sealing test
- KS M ISO 3458-2019 Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for leak tightness under internal pressure
ES-AENOR, Sealing test
ES-UNE, Sealing test
- UNE-EN ISO 3459:2022 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure (ISO 3459:2022)
- UNE 60670-8:2023 Gas installations pipework supplied at maximum operating pressure (MOP) up to and including 5 bar. Part 8: Pressure tightness tests for receiving installation pipework
European Committee for Standardization (CEN), Sealing test
- EN ISO 13255:2017 Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints
- EN 1229:1996 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the leaktightness of the wall under short-term internal pressure
- prEN 12377-2021 Packaging - Flexible tubes - Test method for the air tightness of closures
- EN 1277:2003 Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints
- EN 1277:1996 Plastics Piping Systems - Thermoplastics Piping Systems for Buried Non- Pressure Applications - Test Methods for Leaktightness of Elastomeric Sealing Ring Type Joints
International Electrotechnical Commission (IEC), Sealing test
- IEC 60512-14-7:1997 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 14: Sealing tests - Section 7: Test 14g: Impacting water
American Society for Testing and Materials (ASTM), Sealing test
BE-NBN, Sealing test
American National Standards Institute （ANSI), Sealing test
- BS ISO 8639:2023 Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods for leak tightness and proof of structural design of flexible joints (British Standard)
AT-ON, Sealing test
AENOR, Sealing test
- UNE-EN 12377:2014 Packaging - Flexible tubes - Test method for the air tightness of closures
国家市场监督管理总局、中国国家标准化管理委员会, Sealing test
- GB/T 39383-2020 Thermoplastics piping systems for underground non-pressure applications—Test method for leaktightness of elastomeric sealing ring type joints
- GB/T 39709-2020 Test methods of multiple units glass, windiows static pressure and windiows sealing performance
未注明发布机构, Sealing test
- BS EN 911:1996(1999)*BS 2782-11 MTD 1123W:1996 Plastics piping systems — Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping — Test method for leaktightness under external hydrostatic pressure