ZH
RU
ES

tightness

tightness, Total:499 items.

In the international standard classification, tightness involves: Construction materials, Cork and cork products, Seals, glands, Fluid power systems, Radiation protection, Characteristics and design of machines, apparatus, equipment, Vacuum technology, Commercial vehicles, Nuclear energy engineering, Pipeline components and pipelines, Tyres, Packaging and distribution of goods in general, Internal combustion engines, Ventilators. Fans. Air-conditioners, Rubber and plastics products, Plastics, Environmental testing, Agricultural machines, implements and equipment, Installations in buildings, Road vehicle systems, Non-destructive testing, Waxes, bituminous materials and other petroleum products, Aerospace electric equipment and systems, Valves, Non-metalliferous minerals, Rotating machinery, Biology. Botany. Zoology, Microbiology, Elements of buildings, Protection of and in buildings, Aircraft and space vehicles in general, Electronic components in general, Passenger cars. Caravans and light trailers, Materials and articles in contact with foodstuffs, Road vehicles in general, Vocabularies, Electrical wires and cables, Heat pumps, Refrigerating technology, Lifting equipment, Bearings, Adhesives, Non-textile floor coverings, Hospital equipment, Freight distribution of goods, Railway rolling stock, Transformers. Reactors, Materials for aerospace construction, Internal combustion engines for road vehicles, Construction industry, Glass, Small craft, Fruits. Vegetables, Test conditions and procedures in general, Products of the textile industry, Electrical accessories, External sewage systems, Iron and steel products, Testing of metals, Food products in general, Structures of buildings, Paints and varnishes, Galvanic cells and batteries, Components for aerospace construction, Beverages, Sensory analysis, Cans. Tins. Tubes, Rubber, Refractories.


(U.S.) Ford Automotive Standards, tightness

Association Francaise de Normalisation, tightness

  • NF P84-305:1977 WATERPROOFING. MASTIC ASPHALTS.
  • NF M61-003:1992 Radiation protection. Sealed radioactive sources. Leakage test methods.
  • NF M62-200:1982 Enceintes de confinement - Classification des enceintes selon leur étanchéité
  • NF R80-101:1980 Plastiques - Essai de tenue sous serrage - Méthode à la clé dynamométrique.
  • NF A09-110:1980 Tightness checks. Recommanded pratices for investigating leaks using pressurized gas.
  • NF P84-306:1971 WATERPROOFING. BITUMEN ROOFING FELT CALLED BITUMEN FELTS.
  • NF P84-307:1981 Waterproofing . Bituminous felt with fibreglass fabric reinforcement.
  • NF P84-310:1981 WATERPROOFING-BITUMINIZED ALUMINIUM STEAM BARRIER.
  • NF A09-108:1979 TESTING FOR LEAK TIGHTNESS. RECOMMENDED PRACTICES FOR TESTING BY MEANS OF A VACUUM CHAMBER.
  • NF P84-314:1981 Waterproofing . Flexible reinforced bituminous covering with fibreglass fabric reinforcement.
  • NF EN 14831:2005 Éléments de fixation - Aptitude au serrage - Méthode d'essai simplifiée Couple/Angle
  • NF EN 60068-2-17:1995 Essais d'environnement - Partie 2 : essais - Essai Q : étanchéité.
  • NF X42-122*NF EN 12298:1998 Equipment. Guidance on testing procedures for leaktightness.
  • NF EN 15727:2010 Ventilation des bâtiments - Composants de réseaux, classification de l'étanchéité et essais
  • NF EN ISO 12807:2021 Sûreté des transports de matières radioactives - Contrôle de l'étanchéité des colis
  • NF EN ISO 14903:2017 Systèmes de réfrigération et pompes à chaleur - Qualification de l'étanchéité des composants et des joints
  • NF A09-491:1989 Non destructive testing. Tightness testing. Testing by accumulation or sniffing of gas.
  • NF P84-301:1981 Waterproofing, flexible reinforced bituminous covering with jute reinforcement.
  • NF P84-300:1981 Waterproofing, flexible reinforced bituminous covering with felt/board reinforcement.
  • NF A09-492:1989 Non destructive testing. Tightness testing. Method under vacuum with tracer gras.
  • NF M88-088:1974 Leak tightness and protection of road tankers for the transportation of liquids of classes Ⅲ α,Ⅳα and Ⅴ not belonging to the hydrocarbon category
  • NF T54-941:1999 Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum.
  • NF T54-941*NF EN ISO 13056:2018 Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum
  • NF T54-916*NF EN 14741:2006 Thermoplastics piping and ducting systems - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
  • NF P84-308:1965 Leaktightness. Bituminized fibreglass felt 45 S with slate finish (bituminized felt w 45 S with slate finish).
  • NF EN ISO 13844:2022 Systèmes de canalisations en plastiques - Assemblages par emboîture à bague d'étanchéité en élastomère pour les tubes en plastiques - Méthode d'essai pour l'étanchéité sous pression négative, déviation angulaire et déformation
  • NF D14-512:1986 Sanitary ware. Control of watertightness and water weigh absorbed by sanitary ceramic ware. Test methods.
  • NF A09-493:1990 Non destructive testing. Tightness testing. Recommended practices for testing by vacuum dye penetration by means of helium.
  • NF T54-906:2004 Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints.
  • NF S61-906*NF EN 3-2:1996 Portable fire extinguishers. Part 2 : tightness, dielectric test, tamping test, special provisions.
  • NF EN ISO 13056:2018 Systèmes de canalisations en plastique - Systèmes pour installation d'eau chaude et froide sous pression - Méthode d'essai de l'étanchéité sous vide
  • NF EN 13897:2005 Feuilles souples d'étanchéité - Feuilles d'étanchéité de toiture bitumineuses, plastiques et élastomères - Détermination de l'étanchéité après étirement à basse température
  • NF P51-330-1:2005 Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1 : seals in flue liners.
  • NF P51-330-1*NF EN 14241-1:2013 Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1 : seals in flue liners
  • XP T34-210-2016 Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of end grain sealing performance
  • XP T34-210*XP CEN/TS 16969:2016 Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of end grain sealing performance
  • NF EN ISO 3459:2022 Systèmes de canalisations en matières plastiques - Assemblages mécaniques entre raccords et tubes sous pression - Méthode d'essai pour l'étanchéité sous pression négative
  • NF EN ISO 3458:2015 Systèmes de canalisations en plastique - Assemblages mécaniques entre raccords et tubes sous pression - Méthode d'essai pour l'étanchéité sous pression interne
  • NF EN 2591-324:1998 Série aérospatiale - Organes de connexion électrique et optique. Méthodes d'essais - Partie 324 : étanchéité interfaciale.
  • XP CEN/TS 16969:2016 Peintures et vernis - Produits de peinture et systèmes de revêtement pour bois en extérieur - Evaluation des performances du colmatage des bois de bout
  • NF M88-086:1974 Leak tightness and protection of road tankers for the transportation of liquefied gases at ambient temperature,classified as non-corrosive and not belonging to the hydrocarbon category
  • NF P84-311:1981 Waterproofing . Flexible reinforced bituminous covering with double fibreglass and fibreglass fabric reinforcement.
  • NF EN 3745-501:2006 Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 501 : essai d'étanchéité de la fibre optique
  • NF T54-923:2015 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes - Test method for leaktightness under negative pressure, angular deflection and deformation
  • NF T54-923*NF EN ISO 13844:2022 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes - Test method for leak tightness under negative pressure, angular deflection and deformation
  • NF T54-012:2015 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure
  • NF T54-012*NF EN ISO 3459:2022 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure
  • NF T57-215*NF EN 1119:2009 Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of non-thrust resistant flexible joints with elastomeric sealing elements
  • NF T54-937*NF EN ISO 13845:2015 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes - Test method for leaktightness under internal pressure and with angular deflection
  • NF P85-540:1992 Jointing products. Glazing materials and compounds for sealing. Elastic type sealants. Specifications.

PT-IPQ, tightness

  • E 221-1968
  • NP EN 12294-2002 Plastics piping systems Systems for hot and cold water Test method for leaktightness under vacuum
  • NP EN ISO 13844:2002 Plastics piping systems Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride)(PVC-U) for use with PVC-U pipes Test method for leaktightness under negative pressure(ISO 13844:2000)
  • NP EN 917-2000 Plastics piping systems Thermoplastics valves Test methods for resistance to internal pressure and leaktightness

Danish Standards Foundation, tightness

  • DS/INSTA 130:1989 Buildings. Determination of air tightness
  • DS/EN 12298:1998 Biotechnology - Equipment - Guidance on testing procedures for leak tightness
  • DS/EN 16084:2011 Refrigerating systems and heat pumps - Qualification of tightness of components and joints
  • DS/ISO 14903:2013 Refrigerating systems and heat pumps - Qualification of tightness of components and joints
  • DS/EN 1330-8:1999 Non-destructive testing - Terminology - Part 8: Terms used in leak tightness testing
  • DS/EN 12294:2000 Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum
  • DS/EN 1277:2004 Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints
  • DS/EN 917:1998 Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness
  • DS/INSTA 217:1990 Plastic pipes an fittings. Testing of joint tightness on discharge systems with spigots and elastic sealing rings
  • DS/EN 14741:2006 Thermoplastics piping and ducting systems - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
  • DS/EN 1119:2009 Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of non-thrust resistant flexible joints with elastomeric sealing elements
  • DS/EN 911:1996 Plastics piping systems - Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping - Test method for leaktightness under external hydrostatic pressure
  • DS/EN 524-6:1998 Steel strip sheaths for prestressing tendons - Test methods - Part 6: Determination of leaktightness (determination of water loss)
  • DS/EN 12377:1999 Packaging - Flexible tubes - Test method for the airtightness of closures
  • DS/EN ISO 13844:2000 Plastics piping systems - Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure

Korean Agency for Technology and Standards (KATS), tightness

  • KS M ISO 9392:2004 Agglomerated cork discs-Sealing behaviour
  • KS M ISO 9392:2013 Agglomerated cork discs－Sealing behaviour
  • KS M ISO 9392-2004(2009) Agglomerated cork discs－Sealing behaviour
  • KS M 7137-2006 Testing methods for sealed flexible packages
  • KS W ISO 4084-2004(2009) Aircraft－Repairable contactors(not hermetically sealed)－Performance requirements
  • KS M ISO 9727-6:2020 Cylindrical cork stoppers — Physical tests —Part 6: Determination of liquid tightness
  • KS B ISO 3056:2005 Non-calibrated round steel link lifting chain and chain slings-Use and maintenance
  • KS B ISO 3056:2013 Non－calibrated round steel link lifting chain and chain slings－Use and maintenance
  • KS B ISO 7986-2002(2012) Hydraulic fluid power－Sealing devices－Standard test methods to assess the performance of seals used in oil hydraulic reciprocating applications
  • KS D ISO 9302-2002(2017) Seamless and welded(except submerged arc-welded) steel tubes for pressure purposes－Electromagnetic testing for verification of hydraulic leak-tightness
  • KS M ISO 3458:2019 Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for leak tightness under internal pressure

RO-ASRO, tightness

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, tightness

  • GB/T 12481-1990 Rain proof performance limit for buses
  • GB/T 36110-2018 Sealing performances and test procedures of museum showcase
  • GB/T 12478-1990 Dust proof performance--Test method for buses
  • GB/T 12480-1990 Rain proof performance test method for buses
  • GB/T 38510-2020 Evaluation of self-sealing performance for tyres coated with self-sealing materail
  • GB/T 15171-1994 Test method for leaks in sealed flexible packages
  • GB/T 24645-2009 Slush seal performance of tractors.Test procedures
  • GB/T 12385-1990 Test method for sealing characteristics of gaskets for pipe flanges
  • GB/T 12385-2008 Test method for sealing performance of gaskets for pipe flanges
  • GB/T 15520-1995 Test method for steam tightness of asbestos-rubber sheets
  • GB/T 4620-1984 Spiral wound gaskets test method of hydraulic pressure sealing characteristics
  • GB/T 4621-1984 Spiral wound gaskets test method of steam sealing characteristics
  • GB/T 19919-2005 Small craft.Windows,portlights,hatches,deadlights and doors.Strength and watertightness requirements
  • GB/T 14273-1993 Rotary shaft lip type seals-Performance test proceduces
  • GB/T 20671.4-2006 Classification system and test methods for nonmetallic gasket materials-Part4:Standard test method for sealability of gasket materials

BE-NBN, tightness

API - American Petroleum Institute, tightness

Professional Standard - Automobile, tightness

  • QC/T 476-1999 Passenger car rainproof tightness limit
  • QC/T 271-1999 Test method for rain-tightness of minivans
  • QC/T 646.1-2000 Automobile Dust Tightness Test Dust Cave Method
  • QC/T 29021-1991 Test method for dust tightness of minivans
  • QC/T 476-2007 Rain proof performance limit and test method for bus
  • QC/T 241-2011 Air leakage test methods of automobile wheels for tubeless tires
  • QC/T 241-1997 Test method for tightness of automotive tubeless wheels
  • QC/T 734-2005 Specifications and experimental method on sealing performance for engines of motorcycles and mopeds

International Organization for Standardization (ISO), tightness

  • ISO 9392:1989 Agglomerated cork discs; sealing behaviour
  • ISO/DIS 5119 Low temperature sealing capability of elastomeric seals — Test methods
  • ISO 27895:2009 Vacuum technology - Valves - Leak test
  • ISO 10648-2:1994 Containment enclosures - Part 2: Classification according to leak tightness and associated checking methods
  • ISO/DIS 14903 Refrigerating systems and heat pumps — Qualification of tightness of components and joints
  • ISO 13259:2020 Thermoplastics piping systems for underground non-pressure applications — Test method for leaktightness of elastomeric sealing ring type joints
  • ISO 14903:2017/FDAmd 1 Refrigerating systems and heat pumps — Qualification of tightness of components and joints — Amendment 1
  • ISO 13056:2011 Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum
  • ISO 8639:2000 Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness of flexible joints
  • ISO 8639:2003 Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods for leaktightness and proof of structural design of flexible joints
  • ISO/DIS 13265 Thermoplastics piping systems for non-pressure underground drainage and sewerage — Joints for buried non-pressure applications — Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
  • ISO 9302:1994 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Electromagnetic testing for verification of hydraulic leak-tightness
  • ISO 8639:2023 Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods for leaktightness and proof of structural design of flexible joints
  • ISO 13844:2022 Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with plastic pipes — Test method for leaktightness under negative pressure, angular deflection and deformation
  • ISO 6194-4:2009 Rotary shaft lip-type seals incorporating elastomeric sealing elements - Part 4: Performance test procedures
  • ISO 13255:2010 Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints
  • ISO 3459:2022 Plastic piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under negative pressure

American Society for Testing and Materials (ASTM), tightness

  • ASTM F112-00(2006) Standard Test Method for Sealability of Enveloped Gaskets
  • ASTM F112-00e1 Standard Test Method for Sealability of Enveloped Gaskets
  • ASTM F112-00(2013) Standard Test Method for Sealability of Enveloped Gaskets
  • ASTM F112-00(2019) Standard Test Method for Sealability of Enveloped Gaskets
  • ASTM F112-00 Standard Test Method for Sealability of Enveloped Gaskets
  • ASTM F37-00 Standard Test Methods for Sealability of Gasket Materials
  • ASTM F37-06(2019) Standard Test Methods for Sealability of Gasket Materials
  • ASTM F37-06 Standard Test Methods for Sealability of Gasket Materials
  • ASTM F37-06(2013) Standard Test Methods for Sealability of Gasket Materials
  • ASTM F97-72(2002)e1 Standard Practices for Determining Hermeticity of Electron Devices by Dye Penetration
  • ASTM D7349/D7349M-11 Standard Test Method for Determining the Capability of Roofing and Waterproofing Materials to Seal around Fasteners
  • ASTM F2029-00 Standard Practices for Making Heatseals for Determination of Heatsealability of Flexible Webs as Measured by Seal Strength
  • ASTM F2029-08 Standard Practices for Making Heatseals for Determination of Heatsealability of Flexible Webs as Measured by Seal Strength
  • ASTM F511-98 Standard Test Method for Quality of Cut (Joint Tightness) of Resilient Floor Tile
  • ASTM F979-86(1998)e1 Standard Test Method for Hermeticity of Hybrid Microcircuit Packages Prior to Lidding
  • ASTM F979-86(2003) Standard Test Method for Hermeticity of Hybrid Microcircuit Packages Prior to Lidding
  • ASTM F511-04 Standard Test Method for Quality of Cut (Joint Tightness) of Resilient Floor Tile
  • ASTM F511-11 Standard Test Method for Quality of Cut (Joint Tightness) of Resilient Floor Tile
  • ASTM E1827-96(2007) Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door
  • ASTM E1827-96(2002) Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door
  • ASTM E1827-96 Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door
  • ASTM E1827-22 Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door
  • ASTM D1081-60(1968) Standard Method of Test for Evaluating Pressure Sealing Properties Of Rubber And Rubber- Like Materials
  • ASTM D5657-07(2023) Standard Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners
  • ASTM F2029-16(2021) Standard Practices for Making Laboratory Heat Seals for Determination of Heat Sealability of Flexible Barrier Materials as Measured by Seal Strength
  • ASTM F2029-16 Standard Practices for Making Laboratory Heat Seals for Determination of Heat Sealability of Flexible Barrier Materials as Measured by Seal Strength
  • ASTM D6478-02(2007) Standard Test Method for Determining Specific Packability of Fabrics Used in Inflatable Restraints
  • ASTM D6478-02 Standard Test Method for Determining Specific Packability of Fabrics Used in Inflatable Restraints
  • ASTM D6478-10(2014) Standard Test Method for Determining Specific Packability of Fabrics Used in Inflatable Restraints
  • ASTM F2378-05(2023) Standard Test Method for Sealability of Sheet, Composite, and Solid Form-in-Place Gasket Materials
  • ASTM E1773-05 Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants
  • ASTM E1773-18 Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants
  • ASTM D5973-97(2017) Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing
  • ASTM E1773-10 Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants
  • ASTM E1773-00 Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants
  • ASTM C1756-11 Standard Guide for Comparing Sealant Behavior to Reference Photographs
  • ASTM F693-01(2023) Standard Practice for Sealing Seams of Resilient Sheet Flooring Products by Use of Liquid Seam Sealers
  • ASTM C679-87(1997)e1 Standard Test Method for Tack-Free Time of Elastomeric Sealants
  • ASTM C67-02b Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
  • ASTM C67-02a Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
  • ASTM C67-01 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
  • ASTM C67-02c Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
  • ASTM C67-08 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
  • ASTM C679-15(2022) Standard Test Method for Tack-Free Time of Elastomeric Sealants

Professional Standard - Nuclear Industry, tightness

  • EJ/T 1096-1999 Containment enclosures: Classification according to leak tightness and associated checking method
  • EJ/T 589-1999 Containment leaktightness test for pressurized water reactor of nuclear power plant

CZ-CSN, tightness

FI-SFS, tightness

British Standards Institution (BSI), tightness

  • BS ISO 27895:2010 Vacuum technology. Valves. Leak test
  • BS ISO 27895:2009 Vacuum technology - Valves - Leak test
  • BS EN IEC 60068-2-17:2023 Environmental testing - Tests. Test Q: Sealing
  • BS EN 60068-2-17:1995 Environmental testing. Test methods. Test Q. Sealing
  • BS 9250:2007 Code of practice for design of the airtightness of ceilings in pitched roofs
  • BS EN ISO 14903:2017 Refrigerating systems and heat pumps. Qualification of tightness of components and joints
  • BS EN 1277:2004 Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints
  • BS EN 1277:2003 Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints
  • BS EN ISO 13259:2020 Thermoplastics piping systems for underground non-pressure applications. Test method for leaktightness of elastomeric sealing ring type joints
  • BS EN ISO 13056:2018 Plastics piping systems. Pressure systems for hot and cold water. Test method for leaktightness under vacuum
  • BS EN 14741:2006 Thermoplastics piping and ducting systems. Joints for buried non-pressure applications. Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
  • BS EN 917:1997 Plastics piping systems. Thermoplastics valves. Test methods for resistance to internal pressure and leaktightness
  • BS ISO 16589-4:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements. Performance test procedures
  • BS EN 14241-1:2006 Chimneys. Elastomeric seals and elastomeric sealants. Material requirements and test methods. Seals in flue liners
  • BS EN 14241-1:2013 Chimneys. Elastomeric seals and elastomeric sealants. Material requirements and test methods. Seals in flue liners
  • BS EN 12690:1999 Biotechnology - Performance criteria for shaft seals
  • BS DD ENV 13050:2001 Curtain walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray
  • BS EN 13050:2011 Curtain Walling. Watertightness. Laboratory test under dynamic condition of air pressure and water spray
  • 22/30427903 DC BS EN ISO 14903:2017 AMD 1. Refrigerating systems and heat pumps. Qualification of tightness of components and joints
  • BS ISO 6194-4:2009 Rotary shaft lip-type seals incorporating elastomeric sealing elements - Performance test procedures
  • 21/30442502 DC BS IEC 60068-2-17. Basic environmental testing procedures - Part 2-17. Tests. Test Q: Sealing
  • BS EN 14241-1:2005 Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods Part 1: Seals in flue liners
  • BS ISO 13265:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
  • BS EN ISO 13845:2015 Tracked Changes. Plastics piping systems. Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes. Test method for leaktightness under internal pressure and with angular deflection
  • BS PD CEN/TS 16969:2016 Paints and varnishes. Coating materials and coating systems for exterior wood. Assessment of end grain sealing performance
  • BS EN ISO 13844:2015 Plastics piping systems. Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes. Test method for leaktightness under negative pressure, angular deflection and deformation
  • BS ISO 8639:2016 Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods for leaktightness and proof of structural design of flexible joints
  • BS EN ISO 3459:2015 Plastic piping systems. Mechanical joints between fittings and pressure pipes. Test method for leaktightness under negative pressure
  • 21/30429644 DC BS EN ISO 13844. Plastics piping systems. Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes. Test method for leak tightness under negative pressure, angular deflection and deformation
  • BS EN ISO 13844:2022 Tracked Changes. Plastics piping systems. Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes. Test method for leak tightness under negative pressure, angular deflection and deformation

Professional Standard - Energy, tightness

  • NB/T 20018-2010 Containment leaktightness test for nuclear power plants
  • NB/T 20018-2021 Containment tightness test of pressurized water reactor nuclear power plant

IN-BIS, tightness

GM Daewoo, tightness

RU-GOST R, tightness

  • GOST R 50430-1992 Pipeline gate valves-rates of gates sealibility
  • GOST 8756.18-2017 Canned foods. Methods for determination of appearance, tightness of package and inner surface condition of package
  • GOST 24054-1980 Engineering and instrument production items. Leak detection methods. General requirements
  • GOST R 55876-2013 Glass-reinforced thermosetting plastics pipes and fittings. Test methods for leaktightness of flexible joints
  • GOST 28210-1989 Basic environmental testing procedures. Part 2. Tests. Test Q: Sealing
  • GOST 8756.18-1970 Canned food products. Methods for determination of appearance, tightness of package and inner surface condition of metallic package
  • GOST R 55876-2017 Fiberglass-reinforced thermosetting plastic pipes and parts of pipelines. Test methods for leaktightness of flexible joints
  • GOST 23268.1-1991 Drinking medicinal, medicinal-table and natural-table mineral waters. Methods for determinatoin of organoleptic indices and volume of water in bottles
  • GOST R 55070-2012 Fiberglass reinforced thermosetting plastic pipes and parts of pipelines. Methods to prove the leak tightness under short-term internal pressure

ES-UNE, tightness

  • UNE 56934:2016 Cork stoppers. Determination of the liquid sealing.
  • UNE-EN ISO 14903:2018 Refrigerating systems and heat pumps - Qualification of tightness of components and joints (ISO 14903:2017)
  • UNE-EN ISO 13259:2022 Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints (ISO 13259:2020)
  • UNE-EN ISO 13056:2019 Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum (ISO 13056:2011)
  • UNE-EN ISO 13844:2022 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pipes - Test method for leaktightness under negative pressure, angular deflection and deformation (ISO 13844:2022)
  • UNE-EN ISO 13845:2015 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes - Test method for leaktightness under internal pressure and with angular deflection (ISO 13845:2015)
  • UNE-CEN/TS 16969:2016 Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of end grain sealing performance (Endorsed by AENOR in October of 2016.)
  • UNE 53968:2005 IN ERRATUM:2006 Standard procedures for the assessment of tightness verification and leak detection systems on installations for storaging of liquid oil products.
  • UNE-EN ISO 3459:2022 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure (ISO 3459:2022)
  • UNE-EN ISO 3458:2015 Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure (ISO 3458:2015)

Professional Standard - Machinery, tightness

  • JB/T 12335-2015 Turbochargers.Leakage test method
  • JB/T 9064-1999 Pressure test and sealed examine for coil
  • JB/T 7734-2008 Test procedures of slush seal performance of tractors
  • JB/T 7734-1995 Test method for mud and water tightness of tractors
  • JB/T 6227-1992 Hydrogen-cooled motor sealing test method and evaluation
  • JB/T 6227-2005 Checking methods and evaluation of sealing of hydrogen-cooled electrical machines
  • JB/T 11014-2010 Technical requirements and test methods on seal performance of general utility small gasoline engines

BELST, tightness

Professional Standard - Chemical Industry, tightness

BR-ABNT, tightness

HU-MSZT, tightness

American National Standards Institute （ANSI), tightness

Japanese Industrial Standards Committee (JISC), tightness

工业和信息化部, tightness

  • QC/T 271-2021 Test method for rain tightness of minivans
  • JB/T 6227-2021 Inspection method and evaluation of gas tightness of hydrogen-cooled motor

US-FCR, tightness

Group Standards of the People's Republic of China, tightness

  • T/QGCML 1981-2023
  • T/CIET 251-2023 Test method of sealing performance of liquid storage protective memory
  • T/SASJL 0011-2023 Test method for dust sealing of autonomous buses
  • T/SASJL 0012-2023 Test method for rainproof sealing of autonomous driving buses
  • T/CNFIA 177-2023 Vacuum attenuation method for non-destructive testing of sealing properties of food packaging
  • T/CSAE 137-2020 Water proof test and assessment methods for automotive fastening joints
  • T/SASJL 0017-2023 Method for checking the airtightness of the braking system of autonomous driving buses
  • T/CSEE 0175-2021 Vacuum checking method and evaluation for sealing of water circuit within the winding of turbo generator
  • T/ZZB 1556-2020 Cylinder sealed alkaline nickel-metal hydride cell

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, tightness

  • GJB 3196.2A-2005 Test methods of cartridge.Part 2:Leakage test of cartridge
  • GJB 5389.6-2005 Test method of gun-launched missile Part 6:Seal test
  • GJB 5488.7-2005 Test method of underwater cartridge　Part 7：Tcartridge airproof capability
  • GJB 5491.11-2005 Test method of terminally guided projectile Part 11:Leakage test
  • GJB 5895.10-2006 Test method for anti-tank missile Part 10: Sealing test
  • GJB 5496.7-2005 Test method of aerial bomb Part 7:General inspection-Tightness
  • GJB 3196.9A-2005 Test methods of cartridge.Part 9:Leakage test of packing iron box.Inflatable method
  • GJB 6458.35-2008 Test method of rocket launcher. Part 35: Sealing test of non-metallic launching tube
  • GJB 3196.10A-2005 Test methods of cartridge.Part 10:Leakage test of packing iron box-Vacuum pumping method

Taiwan Provincial Standard of the People's Republic of China, tightness

  • CNS 3631-1993 Basic Environmental Testing Procedures Part 2: Tests - Test Q: Sealing

Lithuanian Standards Office , tightness

  • LST EN 12298-2000 Biotechnology - Equipment - Guidance on testing procedures for leaktightness
  • LST EN 16084-2011 Refrigerating systems and heat pumps - Qualification of tightness of components and joints
  • LST EN 1330-8-2004 Non-destructive testing - Terminology - Part 8: Terms used in leak tightness testing
  • LST EN 12294-2002 Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum
  • LST EN 1277-2004 Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints
  • LST EN 917-2001 Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness
  • LST EN 14741-2006 Thermoplastics piping and ducting systems - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
  • LST EN 1119-2009 Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of non-thrust resistant flexible joints with elastomeric sealing elements
  • LST EN 14241-1-2006 Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners
  • LST EN 524-6-2000 Steel strip sheaths for prestressing tendons - Test methods - Part 6: Determination of leaktightness (Determination of water loss)
  • LST EN 911-2002 Plastics piping systems - Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping - Test method for leaktightness under external hydrostatic pressure
  • LST EN 12377-2001 Packaging - Flexible tubes - Test method for the air tightness of closures

AENOR, tightness

  • UNE-EN 12298:1998 Biotechnology - Equipment - Guidance on testing procedures for leaktightness
  • UNE-EN 16084:2011 Refrigerating systems and heat pumps - Qualification of tightness of components and joints
  • UNE-EN 1277:2004 Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints
  • UNE-EN 917:1997 PLASTICS PIPING SYSTEMS. THERMOPLASTICS VALVES. TEST METHODS FOR RESISTANCE TO INTERNAL PRESSURE AND LEAKTIGHTNESS.
  • UNE-EN 12294:2000 PLASTICS PIPING SYSTEMS. SYSTEMS FOR HOT AND COLD WATER. TEST METHOD FOR LEAKTIGHTNESS UNDER VACUUM
  • UNE-EN 14741:2006 Thermoplastics piping and ducting systems - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
  • UNE-EN 1119:2009 Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of non-thrust resistant flexible joints with elastomeric sealing elements
  • UNE-EN 14241-1:2014 Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners
  • UNE-EN 524-6:1997 STEEL STRIP SHEATHS FOR PRESTRESSING TENDONS. TEST METHODS. PART 6: DETERMINATION OF LEAKTIGHTNESS (DETERMINATION OF WATER LOSS).
  • UNE 53968:2005 IN Standard procedures for the assessment of tightness verification and leak detection systems on installations for storaging of liquid oil products.
  • UNE-EN 12377:2014 Packaging - Flexible tubes - Test method for the air tightness of closures
  • UNE 53968:2005 IN/1M:2015 Standardized procedures for the assessment of tightness verification and leak detection systems in the storage facilities of liquid oil products.

Professional Standard - Aviation, tightness

  • HB 5313-1993 Test method for liquid tightness of anaerobic adhesives used in aviation
  • HB 8424-2014 Leak test method for sealing of aviation components

German Institute for Standardization, tightness

  • DIN EN 12298:1998-05 Biotechnology - Equipment - Guidance on procedures for testing leaktightness; German version EN 12298:1998
  • DIN 18095-2:1991 Smoke control doors; type testing for durability and leakage
  • DIN VDE 0472-604:1985 Testing of cables, wires and flexible cords; tightness of cables sheaths
  • DIN 31692-5:2000 Plain bearings - Part 5: Check list for verification of oil tightness
  • DIN 27205-8:2017-03 State of railway vehicles - Brake - Part 8: Tightness and efficiency / Note: DIN 27205-8 (2010-11) remains valid alongside this standard until 2017-09-30.
  • DIN EN ISO 13259:2020-10 Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints (ISO 13259:2020); German version EN ISO 13259:2020
  • DIN 18542:1999 Sealing of outside wall joints with impregnated sealing tapes made of cellular plastics - Impregnated sealing tapes - Requirements and testing
  • DIN EN 455-1:2001 Medical gloves for single use - Part 1: Requirements and testing for freedom from holes; German version EN 455-1:2000
  • DIN 27205-8:2023-11 State of railway vehicles - Brake - Part 8: Tightness and efficiency / Note: Date of issue 2023-09-29*Intended as replacement for DIN 27205-8 (2017-03).
  • DIN EN ISO 13259:2020 Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints (ISO 13259:2020)
  • DIN EN ISO 14903:2017 Refrigerating systems and heat pumps - Qualification of tightness of components and joints (ISO 14903:2017)
  • DIN EN 917:1997 Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness; German version EN 917:1997
  • DIN EN ISO 14903:2017-12 Refrigerating systems and heat pumps - Qualification of tightness of components and joints (ISO 14903:2017); German version EN ISO 14903:2017 / Note: To be amended by DIN EN ISO 14903/A1 (2022-06).
  • DIN EN 14741:2006 Thermoplastics piping and ducting systems - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure English version of DIN EN 14741:2006-05
  • DIN EN 12294:1999 Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum; German version EN 12294:1999
  • DIN EN 917:1997-03 Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness; German version EN 917:1997
  • DIN EN ISO 13056:2018-12 Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum (ISO 13056:2011); German version EN ISO 13056:2018
  • DIN EN 12690:1999 Biotechnology - Performance criteria for shaft seals; German version EN 12690:1999
  • DIN 27205-12:2006 State of railway vehicles - Brake - Part 12: Function and tightness of railway vehicle brakes
  • DIN 12256:1977 Laboratory glassware; tightness test of conical joints, spherical joints and stopcocks
  • DIN EN 1277:2004 Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints; German version EN 1277:2003
  • DIN EN 14741:2006-05 Thermoplastics piping and ducting systems - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure; German version EN 14741:2006
  • DIN 27205-12:2006-04 State of railway vehicles - Brake - Part 12: Function and tightness of railway vehicle brakes
  • DIN EN 14241-1:2013-11 Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners; German version EN 14241-1:2013
  • DIN EN ISO 13845:2015-05 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes - Test method for leaktightness under internal pressure and with angular deflection (ISO 13845:2015); German and English version EN ISO 1384...
  • DIN EN ISO 13056:2018 Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum (ISO 13056:2011)
  • DIN CEN/TS 16969:2016-11*DIN SPEC 91034:2016-11 Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of end grain sealing performance; German version CEN/TS 16969:2016
  • DIN EN ISO 14903/A1:2022-06 Refrigerating systems and heat pumps - Qualification of tightness of components and joints - Amendment 1 (ISO 14903:2017/DAM 1:2022); German and English version EN ISO 14903:2017/prA1:2022 / Note: Date of issue 2022-05-13*Intended as an amendment to DI...
  • DIN EN ISO 13844:2022-06 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes - Test method for leak tightness under negative pressure, angular deflection and deformation (ISO 13844:2022); German and English version EN ISO 1...
  • DIN EN 524-6:1997-07 Steel strip sheaths for prestressing tendons - Test methods - Part 6: Determination of leaktightness (determination of water loss); German version EN 524-6:1997 / Note: Applies in conjunction with DIN EN 523 (1997-07).
  • DIN EN ISO 13844:2015 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes - Test method for leaktightness under negative pressure, angular deflection and deformation (ISO 13844:2015); German and English version EN ISO 13844
  • DIN EN 2591-322:1998 Aerospace series - Elements of electrical and optical connection; test methods - Part 322: Hermeticity; German version EN 2591-322:1998
  • DIN EN ISO 3459:2022-07 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure (ISO 3459:2022); German and English version EN ISO 3459:2022
  • DIN EN ISO 3458:2015-08 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure (ISO 3458:2015); German and English version EN ISO 3458:2015
  • DIN EN ISO 13845:2015 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes - Test method for leaktightness under internal pressure and with angular deflection (ISO 13845:2015); German and English version EN ISO 13845:2

工业和信息化部/国家能源局, tightness

  • JB/T 13555-2018 Test method for cylinder sealing of reciprocating internal combustion engines

NO-SN, tightness

  • NS 3550-1986 Testing tightness of sewers and manholes by means of air

National Metrological Verification Regulations of the People's Republic of China, tightness

SE-SIS, tightness

  • SIS SS 3413-1988 Plastics pipes and fittings — Testing of joint tightness on discharge systems with elastic sealing rings

WRC - Welding Research Council, tightness

  • BULLETIN 339-1988 DEVELOPMENT OF TIGHTNESS TEST PROCEDURES FOR GASKETS IN ELEVATED TEMPERATURE SERVICE
  • BULLETIN 513-2006 EFFECT OF THE MISALIGNMENT OF PIPING SYSTEMS AND NON PARALLEL FLANGE FACES ON THE TIGHTNESS OF DN200 PN40 FLANGED JOINTS

GM North America, tightness

  • GM GM3652M-2003 Performance Requirements for Bonding and Sealing of Stationary Automotive Glass
  • GM GM9178P-2001 Dielectric Sealing Properties of Roof Trim and Convertible Top Materials (Revision A)
  • GM GM9155P-1993 Method for Determining the Sealing Properties of Vinyl Convertible Top Material
  • GM3652M-2007 Performance Requirements for Bonding and Sealing of Stationary Automotive Glass [Replaced By: GMW GMW3041, GMW GMW3041]
  • GM GM9888P-2002 Water Absorption - Weatherstrips

Military Standard of the People's Republic of China-General Armament Department, tightness

  • GJB 8685.6-2015 Gun-launched missile test methods Part 6: Sealing test
  • GJB 8695.7-2015 Test methods for underwater gun cartridge performance Part 7: Sealing performance
  • GJB 8701.10-2015 Anti-tank missile test methods Part 10: Sealing test
  • GJB 8699.7-2015 Aerial Bomb Test Methods Part 7: General Testing of Sealing Properties
  • GJB 350.12-1987 Surface combat ship mooring and navigation test procedures cabin protection sealing test
  • GJB 785.2-1989 Performance test methods for unvulcanized rubber sealants Density test
  • GJB 469-1988 General specification for cadmium-nickel cylindrical sealed alkaline batteries
  • GJB 785.1-1989 General principles for performance test methods of unvulcanized rubber sealants

American Welding Society (AWS), tightness

  • WRC 339:1988 Development of Tightness Test Procedures for Gaskets in Elevated Temperature Service
  • WRC 513:2006 Effect of the Misalignment of Piping Systems and Non Parallel Flange Faces on the Tightness of DN200 PN40 Flanged Joints

国家市场监督管理总局、中国国家标准化管理委员会, tightness

  • GB/T 39383-2020 Thermoplastics piping systems for underground non-pressure applications—Test method for leaktightness of elastomeric sealing ring type joints
  • GB/T 39709-2020 Test methods of multiple units glass, windiows static pressure and windiows sealing performance

Professional Standard - Petroleum, tightness

  • SY/T 0074-1993 Standard Test Method for Insulating and Sealing Effectiveness of Joint in Coating Pipelines
  • SY/T 0074-1993(条文说明) Standard Test Method for Insulating and Sealing Effectiveness of Joint in Coating Pipelines

European Committee for Standardization (CEN), tightness

  • EN 1330-8:1998 Non-Destructive Testing - Terminology - Part 8: Terms Used in Leak Tightness Testing
  • EN 86:1980 Methods of testing windows; Water tightness test under static pressure
  • prEN ISO 14903 rev Refrigerating systems and heat pumps — Qualification of tightness of components and joints
  • EN 1277:2003 Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints
  • EN 1277:1996 Plastics Piping Systems - Thermoplastics Piping Systems for Buried Non- Pressure Applications - Test Methods for Leaktightness of Elastomeric Sealing Ring Type Joints
  • EN 14741:2006 Thermoplastics piping and ducting systems - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
  • EN 12294:1999 Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum
  • EN 1989:2000 Thermoplastics Piping Systems - Joints for Buried Non-Pressure Sewerage Applications - Test Method for Long-Term Sealing Performance of Joints with Thermoplastic Elastomer (TPE) Seals by Estimating the Sealing Pressure
  • EN 12690:1999 Biotechnology - Performance criteria for shaft seals
  • EN 13050:2011 Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray
  • EN 14241-1:2013 Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners
  • prEN 524-6-1991 Steel strip sheaths for prestressing tendons; methods of test, determination of leaktightness (determination of water loss)
  • PD CEN/TS 16969:2016 Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of end grain sealing performance
  • prEN ISO 13844:2021 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pipes - Test method for leak tightness under negative pressure, angular deflection and deformation (ISO/DIS 13844:2021)
  • EN ISO 13255:2017 Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints
  • EN ISO 3459:2022 Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure (ISO 3459:2022)
  • prEN 12377-2021 Packaging - Flexible tubes - Test method for the air tightness of closures

GOSTR, tightness

  • GOST ISO 14903-2016 Refrigerating systems and heat pumps. Qualification of tightness of components and joints
  • GOST R ISO 10893-1-2016 Seamless and welded steel tubes. Part 1. Automated electromagnetic testing for the verification of hydraulic leak tightness
  • GOST 34233.4-2017 Vessels and apparatus. Norms and methods of strength calculation. Strength and leak-tightness calculation of flange joints
  • GOST R ISO 3458-2020 Plastis piping systems. Mechanical joints between fittings and pressure pipes. Test method for leak tightness under internal pressure
  • GOST R 59111-2020 Plastic piping systems. Mechanical joints between fittings and pressure pipes. Test method for leak tightness under negative pressure
  • GOST R ISO 13844-2020 Plastic piping systems. Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes. Test method for leak tightness under negative pressure, angular deflection and deformation
  • GOST R ISO 13845-2020 Plastic piping systems. Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes. Test method for leak tightness under internal pressure and with angular deflection

CEN - European Committee for Standardization, tightness

  • PREN 15834-2008 Refrigerating systems and heat pumps - Qualification of tightness of components and joints
  • EN ISO 13056:2018 Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum
  • EN 14241-1:2005 Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners

Henan Provincial Standard of the People's Republic of China, tightness

  • DB41/T 1896-2019 Specification for tightness test of reducer for wire rope electric hoist

中国石油天然气总公司, tightness

  • SY 0074-1993 Standard test method for pipe anti-corrosion coating insulation sealing

ES-AENOR, tightness

Professional Standard - Railway, tightness

  • TB/T 1715-2006 Technical specification of pressure testing experiment for plunger and barred assembly of locomotive diesel engine
  • TB/T 1841-1987 Dongfeng 4 type locomotive plunger couple leak test technical conditions

GM Global, tightness

  • GMW 3041-2013 Performance Requirements for Bonding and Sealing of Stationary Automotive Glass Issue 5; English
  • GMW 3041-2011 Performance Requirements for Bonding and Sealing of Stationary Automotive Glass Issue 4; English
  • GMW 14169-2012 Requirements for Dense Elastomeric Body Seals Issue 4; English

PL-PKN, tightness

  • PN-EN ISO 13259-2021-01 E Thermoplastics piping systems for underground non-pressure applications--Test method for leaktightness of elastomeric sealing ring type joints (ISO 13259:2020)
  • PN A75052-02-1990 Fruits, vegetables and vegetable-meat products Methods of microbiological analyses Determination of closeness packaged

Professional Standard - Electricity, tightness

  • DL/T 264-2012 Guide for field sealing test of oil immersed power transformer

Society of Automotive Engineers (SAE), tightness

  • SAE AMS3168-2001 Aqueous Cleaners for Cleaning Prior to Application of Sealing Compounds
  • SAE J2973-2014 Fuel Components and Systems Leak Tightness Specifications and Test Practices (or Methods)
  • SAE J1610-2012 Test Method for Evaluating the Sealing Capability of Hose Connections with a PVT Test Facility
  • SAE J1002-2000 Seals—Evaluation of Elastohydrodynamic
  • SAE J1002-1987 SEALS - EVALUATION OF ELASTOHYDRODYNAMIC
  • SAE J639-1999 Safety and Containment of Refrigerant for Mechanical Vapor Compression Systems Used for Mobile Air-Conditioning Systems
  • SAE AS4716A-2005 (R) Gland Design, O-ring and Other Elastomeric Seals

SAE - SAE International, tightness

  • SAE J2973-2018 Fuel Components and Systems Leak Tightness Specifications and Test Practices (or Methods)
  • SAE J1610-1993 Test Method for Evaluating the Sealing Capability of Hose Connections with a PVT Test Facility@ Recommended Practice (April 1993)
  • SAE J1002-1994 SEALS - EVALUATION OF ELASTOHYDRODYNAMIC
  • SAE J1002-1985 Seals - Evaluation of Elastohydrodynamic
  • SAE J1002-2002 Seals - Evaluation of Elastohydrodynamic
  • SAE J639-1991 Safety and Containment of Refrigerant for Mechanical Vapor Compression Systems Used for Mobile Air-Conditioning Systems
  • SAE J639-2005 Safety and Containment of Refrigerant for Mechanical Vapor Compression Systems Used for Mobile Air-Conditioning Systems
  • SAE J639-1987 Safety Practices for Mechanical Vapor Compression Refrigeration Equipment or System Used to Cool Passenger Compartment of Motor Vehicles
  • SAE J639-1981 Safety Practices for Mechanical Vapor Compression Refrigeration Equipment or System Used to Cool Passenger Compartment of Motor Vehicles
  • SAE J639-2020 Safety Practices for Mechanical Vapor Compression Refrigeration Equipment or System Used to Cool Passenger Compartment of Motor Vehicles
  • SAE J639-2011 Safety Practices for Mechanical Vapor Compression Refrigeration Equipment or System Used to Cool Passenger Compartment of Motor Vehicles
  • SAE J639-1994 Safety and Containment of Refrigerant for Mechanical Vapor Compression Systems Used for Mobile Air-Conditioning Systems (April 1994)

国家能源局, tightness

  • SY/T 7644-2021 Technical specifications for wellbore and salt cavern sealing testing of salt cavern type gas storage
  • NB/T 14004.4-2022 Shale gas cementing project Part 4: Cement sheath sealing evaluation method

CH-SNV, tightness

  • SN EN ISO 13259:2020 Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints (ISO 13259:2020)

ZA-SANS, tightness

  • SANS 664-3:2009 Wedge gate and resilient seal valves for waterworks Part 3: Resilient seal valves
  • SANS 665-3:2009 Wedge gate and resilient seal valves for general purposes Part 3: Resilient seal valves
  • SANS 12294:1999 Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum

VN-TCVN, tightness

  • TCVN 4412-1987 Canned foods.Method for determination of can appearance, tightness and inner surface state

KR-KS, tightness

  • KS M ISO 9727-6-2020 Cylindrical cork stoppers — Physical tests —Part 6: Determination of liquid tightness
  • KS M ISO 3458-2019 Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for leak tightness under internal pressure

未注明发布机构, tightness

  • BS EN 1330-8:1998(2008) Non - destructive testing — Terminology — Part 8 : Terms used in leak tightness testing
  • BS EN 911:1996(1999)*BS 2782-11 MTD 1123W:1996 Plastics piping systems — Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping — Test method for leaktightness under external hydrostatic pressure
  • DIN EN ISO 13259:2018 Buried piping systems made of thermoplastics for non-pressurized applications – Test methods for the tightness of elastomeric sealing ring connections (ISO 13259:2018); German version EN ISO 13259:2018
  • DIN EN ISO 13844:2022 Plastic piping systems – Push-in socket connections with elastomeric sealing rings for plastic pressure pipes – Test method for tightness under negative pressure, bending and deformation (ISO 13844:2022)

United States Navy, tightness

Professional Standard - Water Conservancy, tightness

  • SL/T 71-1994 Test method of leakproofness under internal pressure of joints between polyethylene (PE) fittings and pipes for micro-irrigation

ACI - American Concrete Institute, tightness

  • ACI 350.1/350.1R-2001 Tightness Testing of Environmental Engineering Concrete Structures (ACI 350.1-01) and Commentary (ACI 350.1R-01)
  • ACI 350.1-2010 Specification for Tightness Testing of Environmental Engineering Concrete Containment Structures (ACI 350.1-10) and Commentary

American Concrete Institute, tightness

  • ACI 350.1M-2010 Specification for Tightness Testing of Environmental Engineering Concrete Containment Structures (ACI 350.1M-10) and Commentary

Underwriters Laboratories (UL), tightness

Defense Logistics Agency, tightness

VE-FONDONORMA, tightness

Japan Electronics and Information Technology Industries Association, tightness

  • EIAJ RC-2372-1997 Test methods of seal performance of aluminium electrolytic capacitors with non-solid electrolyte for use in electronic equipment

TH-TISI, tightness

  • TIS 2471-2009 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes.electromagnetic testing for verification of hydraulic leak.tightness

Canadian General Standards Board （CGSB), tightness

  • CGSB 1-GP-71 METH 123.2-1979 Methodes D'Essai Des Peintures Et Pigments Caracteristiques De Scellement Modifiee En Septembre 1980; Reeditee En Septembre 1982

AASHTO - American Association of State Highway and Transportation Officials, tightness

  • PP25-1995 Standard Practice for Evaluating the Performance of Joint Seals in Portland Cement Concrete Pavement (2000 Edition)

Professional Standard - Electron, tightness

SG-SPRING SG, tightness

  • SS 232 Pt.2-1999 SPECIFICATION FOR Portable fire extinguishers Part 2 : Tightness, dielectric test, tamping test, special provisions
  • SS 270-1983 SPECIFICATION FOR Elastomeric Joint Rings

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., tightness

  • ASHRAE OR-10-051-2010 Method to Specify and Empirically Develop Air-Conditioning Components and System Leak Tightness for In-Line Leak Testing

AT-ON, tightness

  • OENORM EN ISO 13844:2021 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pipes - Test method for leak tightness under negative pressure, angular deflection and deformation (ISO/DIS 13844:2021)
  • OENORM EN 12377-2021 Packaging - Flexible tubes - Test method for the air tightness of closures

YU-JUS, tightness

  • JUS C.T7.231-1984 Anodic oxidation of aluminium and aluminium alloys. Assessment of sealing quality of oxide coating by measurement of the ihss of mase after immersion in phosphoric-chromic acid solution

GM Europe, tightness

  • GME L-0-3-2013 Rotary Shaft Seal Durability Test (Revision 6; English/German; Includes Appendix A,B,C,D and E)
  • GME 01001-2008 Flocked Elastomeric Seals (English/German; This standard may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded for all future projects and replaced by GMW14168.)

  Sealing performance test, tightness test, Sealing test, Sealing test, tightness, Sealing test, Sealing test, tightness test, Sealing index, Leakage check, Cover tightness, Leakage check, Seal performance test, Sealing inspection, Instrument tightness, plastic tightness, plastic tightness, Sealing performance, Vacuum tightness, Sealing index.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved