ZH

RU

ES

iso thermoplastic elastomer

iso thermoplastic elastomer, Total:498 items.

In the international standard classification, iso thermoplastic elastomer involves: Vocabularies, Plastics, Insulating materials, Road engineering, Road vehicle systems, Rubber, Waxes, bituminous materials and other petroleum products, Pipeline components and pipelines, Rubber and plastics products, Education, Installations in buildings, Electrical wires and cables, Environmental protection, Chipless working equipment, Raw materials for rubber and plastics, Products of the textile industry, Bridge construction, Integrated Services Digital Network (ISDN), Construction materials, Terminology (principles and coordination), Fibre optic communications, Kitchen equipment, Materials for aerospace construction, Manufacturing processes in the rubber and plastics industries, Medical sciences and health care facilities in general, Fluid power systems, Analytical chemistry, Valves, Cellular materials, Medical equipment.


British Standards Institution (BSI), iso thermoplastic elastomer

  • 21/30425866 DC BS EN ISO 18064. Thermoplastic elastomers. Nomenclature and abbreviated terms
  • 20/30387774 DC BS ISO 23673. Plastics. Elasticity index. Determination of elastic property of melts
  • BS EN ISO 18064:2014 Thermoplastic elastomers. Nomenclature and abbreviated terms
  • BS EN ISO 18064:2005 Thermoplastic elastomers - Nomenclature and abbreviated terms
  • BS ISO 18064:2003 Thermoplastic elastomers - Nomenclature and abbreviated terms
  • 23/30456705 DC BS ISO 813-2. Rubber, vulcanized or thermoplastic. Determination of adhesion to a rigid substrate - Part 2. Adhesion of a soft thermoplastic elastomer layer
  • BS EN ISO 18064:2022 Tracked Changes. Thermoplastic elastomers. Nomenclature and abbreviated terms
  • BS ISO 23673:2021 Plastics. Elasticity index. Determination of elastic property of melts
  • 21/30410891 DC BS ISO 23711. Elastomeric seals. Requirements for materials for pipe joint seals used in water and drainage applications. Thermoplastic elastomers
  • BS EN 681-2:2000 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Thermoplastic elastomers
  • BS EN ISO 14910-2:1998 Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion. Preparation of test specimens and determination of properties
  • BS EN ISO 14910-2:2013 Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion. Preparation of test specimens and determination of propertie
  • BS ISO 23711:2022 Elastomeric seals. Requirements for materials for pipe joint seals used in water and drainage applications. Thermoplastic elastomers
  • BS EN ISO 20029-2:2018 Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion. Preparation of test specimens and determination of properties
  • BS ISO 4662:2010 Rubber, vulcanized or thermoplastic - Determination of rebound resilience
  • BS ISO 4662:2009 Rubber, vulcanized or thermoplastic - Determination of rebound resilience
  • BS ISO 4662:2017 Rubber, vulcanized or thermoplastic. Determination of rebound resilience
  • BS EN ISO 20029-1:2018 Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion. Designation system and basis for specification
  • BS EN ISO 14910-1:1998 Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion. Designation system and basis for specifications
  • BS EN ISO 14910-1:2013 Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion. Designation system and basis for specification
  • 23/30470434 DC BS ISO 1817. Rubber, vulcanized or thermoplastic. Determination of the effect of liquids
  • BS ISO 14910-2:1998 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Preparation of test specimens and determination of properties
  • 20/30406605 DC BS ISO 16790. Plastics. Determination of drawing characteristics of thermoplastics in the molten state

International Federation of Trucks and Engines, iso thermoplastic elastomer

International Truck and Engine Corporation (ITEC), iso thermoplastic elastomer

Lithuanian Standards Office , iso thermoplastic elastomer

  • LST EN ISO 18064:2015 Thermoplastic elastomers - Nomenclature and abbreviated terms (ISO 18064:2014)
  • LST EN ISO 18064:2005 Thermoplastic elastomers - Nomenclature and abbreviated terms (ISO 18064:2003)
  • LST EN ISO 14910-2:2006 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties (ISO 14910-2:1997)
  • LST EN ISO 14910-1:2006 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 1: Designation system and basis for specifications (ISO 14910-1:1997)
  • LST EN ISO 14910-1:2013 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 1: Designation system and basis for specification (ISO 14910-1:2013)
  • LST EN ISO 3994:2011 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:2007)
  • LST EN 681-2+A1-2003 Elastomeric Seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers
  • LST EN 681-2+A1-2003/A2-2005 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers
  • LST EN ISO 9969:2008 Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2007)
  • LST EN ISO 9967:2008 Thermoplastics pipes - Determination of creep ratio (ISO 9967:2007)
  • LST EN 28233-2001 Thermoplastics valves - Torque - Test method (ISO 8233:1988)
  • LST EN ISO 13967:2010 Thermoplastics fittings - Determination of ring stiffness (ISO 13967:2009)
  • LST EN ISO 16136:2006 Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006)

European Committee for Standardization (CEN), iso thermoplastic elastomer

  • EN ISO 18064:2005 Thermoplastic elastomers - Nomenclature and abbreviated terms
  • prEN ISO 18064:2021 Thermoplastic elastomers - Nomenclature and abbreviated terms (ISO/DIS 18064:2021)
  • EN ISO 18064:2014 Thermoplastic elastomers - Nomenclature and abbreviated terms (ISO 18064:2014)
  • EN ISO 18064:2022 Thermoplastic elastomers - Nomenclature and abbreviated terms (ISO 18064:2022)
  • EN ISO 14910-2:2013 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties
  • prEN 495-5-1991 Thermoplastic and elastomeric roofing and sealing sheets; low temperature folding test
  • prEN 495-1-1991 Thermoplastic and elastomeric roofing and sealing sheets; determination of high temperature dimensional stability
  • prEN 495-4-1991 Thermoplastic and elastomeric roofing and sealing sheets; determination of water vapour transmission properties
  • EN ISO 20029-1:2018 Plastics - Thermoplastic polyester/ester and polyether/ ester elastomers for moulding and extrusion - Part 1: Designation system and basis for specification
  • EN ISO 14910-1:2013 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 1: Designation system and basis for specification
  • EN ISO 9967:2016 Thermoplastics pipes - Determination of creep ratio
  • EN ISO 9969:2016 Thermoplastics pipes - Determination of ring stiffness
  • EN ISO 13845:2015 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes - Test method for leaktightness under internal pressure and with angular deflection
  • prEN 495-3-1991 Thermoplastic and elastomeric roofing and sealing sheets; determination of split pressure resistance
  • EN 1844:2001 Flexible Sheets for Waterprofing - Determination of Resistance to Ozone - Plastic and Rubber Sheets for Roof Waterprofing

AENOR, iso thermoplastic elastomer

  • UNE-EN ISO 18064:2015 Thermoplastic elastomers - Nomenclature and abbreviated terms (ISO 18064:2014)
  • UNE-EN ISO 14910-1:2014 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 1: Designation system and basis for specification (ISO 14910-1:2013)
  • UNE-EN ISO 14910-2:2014 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties (ISO 14910-2:2013, Corrected version 2015-12-15)
  • UNE-EN ISO 3994:2014 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:2014)
  • UNE-EN 681-2/A1:2002 Elastomeric seals- Material requrements for pipe joint seals used in water and drainage applications-Part 2: Thermoplastic elastomers.
  • UNE-EN 681-2:2001/A2:2006 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers
  • UNE-EN 681-2:2001 Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers.
  • UNE 53521:2015 Elastomers. Determination of plasticity of the raw rubbers and their unvulcanized compounds.
  • UNE-EN 28233:1992 THERMOPLASTICS VALVES. TORQUE. TEST METHOD. (ISO 8233:1988)
  • UNE-EN ISO 16136:2007 Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006)
  • UNE-EN ISO 13967:2010 Thermoplastics fittings - Determination of ring stiffness (ISO 13967:2009)

Hebei Provincial Standard of the People's Republic of China, iso thermoplastic elastomer

  • DB13/T 1512-2012 thermoplastic elastomer cable compound
  • DB13/T 2539-2017 Waste rubber and plastic based thermoplastic elastomer modified asphalt
  • DB13/T 2641-2018 Construction technical specification for highway waste rubber and plastic based thermoplastic elastomer modified asphalt pavement
  • DB13/T 2689-2018 General technical requirements for thermoplastic polyurethane elastomer toughened polyoxymethylene copolymer engineering plastics

GM Europe, iso thermoplastic elastomer

SE-SIS, iso thermoplastic elastomer

  • SIS SS 16 26 02-1983 Elastomers (Rubber and thermoplastic elastomers) - General information
  • SIS SS 16 22 15-1986 Rubber and thermoplastic elastomer - Determination of rebound resilience
  • SIS SS 16 22 22-1986 Rubber and thermoplastic elastomer - Evaluation of flame resistance
  • SIS SS 16 22 04-1986 Rubber and thermoplastic elastomer - Determination of compression set
  • SIS SS 16 22 09-1986 Rubber and thermoplastic elastomer - Determination of tension set
  • SIS SS-IEC 811:1992 Cables - Test tnethodsfor insulations and sheaths of elastomeric and Ihermoplastic compounds
  • SIS SS 16 22 13-1986 Rubber and thermoplastic elastomer - Evaluation of corrosion of steel in wet atmosphere
  • SIS SS 16 22 16-1986 Rubber and thermoplastic elastomer - Low temperature stiffening (Gehman test) - Determination
  • SIS SS 16 22 10-1986 Rubber and thermoplastic elastomer - Resistance to ozone cracking - Static strain test
  • SIS SS 16 22 27-1986 Rubber and thermoplastic elastomer - Conducting and antistatic materials - Measurement of resistivity
  • SIS SS 3638-1990 Plastics pipes — Sealing rings of thermoplastic elastomers ITPE) for plastic discharge, drainage and sewage pipe systems
  • SIS SS 16 22 03-1986 Rubber and thermoplastic elastomer - Determination of tear strength (trouser and crescent test pieces)
  • SIS SS 16 11 47-1983 Plastics - Determination of the melt flow rate of thermoplastics

(U.S.) Ford Automotive Standards, iso thermoplastic elastomer

  • FORD ESA-M4D433-A2-1985 THERMOPLASTIC POLYOLEFIN ELASTOMER, BLOW MOLDING COMPOUND
  • FORD SK-M4D9940-A-2000 THERMOPLASTIC POLYOLEFINE ELASTOMER, SEMI RIGID
  • FORD SA-M4D9945-A-1994 THERMOPLASTIC POLYOLEFINE ELASTOMER, SEMI RIGID
  • FORD WSD-M5G57-A-1993 BARRIER, ACOUSTICAL, THERMOPLASTIC ELASTOMER (EVAC)
  • FORD ESB-M98P1-A-1985 SURFACE TREATMENT FOR THERMOPLASTIC POLYOLEFIN ELASTOMERS (TPO)
  • FORD WSS-M4D964-A3-2011 THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D1006-A2-2013 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE), 70 DUROMETER D HARDNESS BLOW MOLDING COMPOUND
  • FORD ESH-M4D415-A2-1992 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), BLOW MOLDING COMPOUND Shown on ESH-M4D415-A1
  • FORD ESA-M4D433-A2-2011 THERMOPLASTIC POLYOLEFIN ELASTOMER, BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSB-M4D853-A-2006 THERMOPLASTIC POLYURETHANE ELASTOMER (TPUR), IMPACT MODIFIED, 20 % MINERAL FILLED MOLDING COMPOUND
  • FORD WSS-M4D670-B1-2015 THERMOPLASTIC POLYOLEFIN ELASTOMER, (TEO) MOLDING COMPOUND, <12% MINERAL FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D979-A-2013 THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND, UNPAINTED AIRBAG COVER
  • FORD WSS-M4D683-A2-1995 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE) 40 DUROMETER D HARDNESS, HEAT STABILIZED MOLDING COMPOUND
  • FORD ESK-M4D498-A-1994 THERMOPLASTIC POLYURETHANE ELASTOMER, 20% GLASS FIBER - 67 DUROMETER D HARDNESS
  • FORD WSB-M4D683-A-2005 THERMOPLASTIC ETHER ESTER ELASTOMER (TEEE) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M4G311-A-1990 SEALER-ELASTOMERIC TAPE FORM, HEAT EXPANDING, MAGNETIC
  • FORD WSB-M4D845-A-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), 5 % MINERAL FILLED MOLDING COMPOUND, INTERIOR
  • FORD WSB-M2D452-A-2004 THERMOPLASTIC ELASTOMER (TEEE) MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD FLTM BO 129-2-2001 WATER ABSORPTION - ELASTOMERS AND PLASTICS (Replaces FLTM BO 029-02)
  • FORD WSS-M4D962-A-2011 THERMOPLASTIC POLYESTER ELASTOMERIC MOLDING COMPOUND, 20% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D938-A1-2012 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), COLOR PIGMENTED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M2D476-A2-2004 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), 100% RECYCLED RUBBER MODIFIED ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESL-M5G51-A-1990 DEADENER, ELASTOMER BASED, EXTRUDED, PRESSURE SENSITIVE
  • FORD WSS-M2D452-A4-2010 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE), MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M98P1-A-2011 SURFACE TREATMENT FOR THERMOPLASTIC POLYOLEFIN ELASTOMERS (TPO) ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D1006-A1-2013 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE), 55 DUROMETER D HARDNESS BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M2D197-A3-2020 THERMOPLASTIC POLYURETHANE ELASTOMER (TPU) MOLDING COMPOUND, INTERIOR, MIC, 90 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D961-A4-2009 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), 12% MINERAL, COLOR PIGMENTED, UV STABILIZED, HIGH MELT FLOW, LOW CLTE, MOLD-IN-COLOR AND PARTIALLY PAINTED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D714-A2-2012 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 27% MINERAL FILLED MOLDING COMPOUND PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D873-B1-2012 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 15% MINERAL FILLED, MOLDING COMPOUND, MOLD-IN-COLOR, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D873-B1-2013 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 15% MINERAL FILLED, MOLDING COMPOUND, MOLD-IN-COLOR, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D873-B1-2021 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 15% MINERAL FILLED, MOLDING COMPOUND, MOLD-IN-COLOR, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESA-M2D197-A1-2004 THERMOPLASTIC POLYURETHANE ELASTOMER, 80 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M4D529-A-2005 POLYETHER BLOCK AMIDE (PEBA) THERMOPLASTIC ELASTOMER MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESA-M2D197-A1-2009 THERMOPLASTIC POLYURETHANE ELASTOMER, 80 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M2D501-A-2009 THERMOPLASTIC ELASTOMER (TEEE) MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M4D529-A-2010 POLYETHER BLOCK AMIDE (PEBA) THERMOPLASTIC ELASTOMER MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD FLTM BP 001-07-2000 DUROMETER AND CONFINED HEAT RESISTANCE OF SILICONE ELASTOMER
  • FORD WSB-M4G352-A-1994 SEALER, ELASTOMER, FLEXIBLE ENCAPSULANT, HOT APPLIED
  • FORD FLTM BO 029-03-2001 WATER IMMERSION - WARP TEST OF ELASTOMERS AND PLASTICS
  • FORD FLTM BO 029-3-2001 WATER IMMERSION - WARP TEST OF ELASTOMERS AND PLASTICS
  • FORD WSB-M4D735-A-2005 THERMOPLASTIC POLYURETHANE ELASTOMER (TPU), 15% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D1039-A1-2013 THERMOPLASTIC OLEFIN ELASTOMER (TPO), 10% MINERAL FILLED, MOLDED-IN-COLOR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D1025-A1-2021 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), MOLD-IN-COLOR, MOLDING COMPOUND, EXTERIOR, HIGH IMPACT, MEDIUM-LOW STIFFNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M2D517-A2-2014 THERMOPLASTIC ELASTOMER (TPS) STYRENE BLOCK COPOLYMER, MEDIUM HEAT RESISTANT 50 DUROMETER A HARDNESS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M2D517-A2-2020 THERMOPLASTIC ELASTOMER (TPS) STYRENE BLOCK COPOLYMER, MEDIUM HEAT RESISTANT 50 DUROMETER A HARDNESS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M4D404-A-1990 THERMOPLASTIC POLYOLEFIN, ELASTOMER AND GLASS FIBER MODIFIED, MOLDING COMPOUND, INTERIOR GRADE, COLOR PIGMENTED, UV STABILIZED
  • FORD WSD-M2D441-A-2004 THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSD-M2D379-A2-2020 THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED MODERATE HEAT RESISTANT 69 DUROMETER A HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSD-M96D16-A-1988 THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED MODERATE HEAT RESISTANT 69 DUROMETER A HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D777-A3-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), HIGH COLD IMPACT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M99D63-A3-2006 THERMOPLASTIC ELASTOMER, FLOOR COVERING, GRAINED, SHAPED ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D1061-A1-2021 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), 5% MINERAL FILLED, MOLDED IN COLOR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D873-B3-2011 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 20% MINERAL FILLED, HIGH IMPACT, LOW CLTE, MOLDING COMPOUND, MOLD-IN-COLOR ONLY, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSL-M5G51-A3-1996 INSULATOR, ELASTOMER BASED, EXTRUDED, PRESSURE SENSITIVE WITH POLYESTER FILM,
  • FORD WSS-M4D550-A10-2010 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) MINERAL FILLED, HIGH IMPACT MOLDING COMPOUND, MOLDED IN COLOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D550-A10-2012 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), 20% TALC FILLED, MEDIUM HIGH IMPACT, MOLDING COMPOUND, MOLDED IN COLOR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D550-A10-2013 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), 20% TALC FILLED, MEDIUM HIGH IMPACT, MOLDING COMPOUND, MOLDED IN COLOR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D550-A10-2015 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), 20% TALC FILLED, MEDIUM HIGH IMPACT, MOLDING COMPOUND, MOLDED IN COLOR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D906-B1-2012 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), 20% TALC FILLED, MEDIUM HIGH IMPACT, MOLDING COMPOUND, MOLDED IN COLOR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD-WSS-M99P1111-A-2007 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), 20% TALC FILLED, MEDIUM HIGH IMPACT, MOLDING COMPOUND, MOLDED IN COLOR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M2C945-B1-2017 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), 20% TALC FILLED, MEDIUM HIGH IMPACT, MOLDING COMPOUND, MOLDED IN COLOR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD-WSK-M4D895-A1-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), 20% TALC FILLED, MEDIUM HIGH IMPACT, MOLDING COMPOUND, MOLDED IN COLOR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M99P22-A1-1993 WEATHERING PERFORMANCE, MOLDED-IN-COLOR UNPAINTED, PLASTIC/ ELASTOMERIC MATERIALS, EXTERIOR
  • FORD WSB-M4D734-A-2005 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) MOLDING COMPOUND, PAINTED APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSB-M4D831-A-2006 THERMOPLASTIC POLYURETHANE ELASTOMER (TPUR), 65 DUROMETER D HARDNESS MOLDING COMPOUND ** TO BE USED WITH FORD WSS-M99P1111-A **
  • FORD WSK-M4D755-A3-2006 THERMOPLASTIC POLYURETHANE ELASTOMER (TPUR), 65 DUROMETER D HARDNESS MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D777-A7-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), HIGH COLD IMPACT EXTRUSION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D777-A8-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) HIGH COLD IMPACT EXTRUSION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSB-M4D831-A-2009 THERMOPLASTIC POLYURETHANE ELASTOMER (TPUR), 65 DUROMETER D HARDNESS MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***

AT-ON, iso thermoplastic elastomer

German Institute for Standardization, iso thermoplastic elastomer

  • DIN EN ISO 18064:2021 Thermoplastic elastomers - Nomenclature and abbreviated terms (ISO/DIS 18064:2021); German and English version prEN 18064:2021
  • DIN EN ISO 18064:2005 Thermoplastic elastomers - Nomenclature and abbreviated terms (ISO 18064:2003); German version EN ISO 18064:2005
  • DIN EN ISO 18064:2022-08 Thermoplastic elastomers - Nomenclature and abbreviated terms (ISO 18064:2022); German version EN ISO 18064:2022
  • DIN EN ISO 18064:2015 Thermoplastic elastomers - Nomenclature and abbreviated terms (ISO18064:2014); German version EN ISO 18064:2014
  • DIN 53765:1994 Testing of plastics and elastomeres; thermal analysis; DSC-method
  • DIN EN ISO 14910-2:2013 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties (ISO 14910-2:2013); German version EN ISO 14910-2:2013
  • DIN 78004-2:2021 Plastics - Thermoplastic styrene-based elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties
  • DIN EN ISO 20029-2:2018 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimen and determination of properties (ISO 20029-2:2017); German version EN ISO 20029-2:2018
  • DIN EN ISO 14910-2:2010 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2 : Preparation of test specimens and determination of properties (ISO/DIS 14910-2:2010); German version prEN ISO 14910-2:2010
  • DIN 78004-1:2021 Plastics - Thermoplastic styrene-based elastomers for moulding and extrusion - Part 1: Designation system and basis for specification
  • DIN 78004-2:2021-03 Plastics - Thermoplastic styrene-based elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties
  • DIN EN ISO 20029-1:2018 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 1: Designation system and basis for specification (ISO 20029-1:2017); German version EN ISO 20029-1:2018
  • DIN EN ISO 14910-1:2013 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 1: Designation system and basis for specifications (ISO 14910-1:2013); German version EN ISO 14910-1:2013
  • DIN EN 681-2:2006-11 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers; German version EN 681-2:2000 + A1:2002 + A2:2005
  • DIN EN ISO 13259:2020 Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints (ISO 13259:2020)
  • DIN EN ISO 20029-2:2018-11 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimen and determination of properties (ISO 20029-2:2017); German version EN ISO 20029-2:2018
  • DIN EN 28233:1991 Thermoplastics valves; torques; test method (ISO 8233:1988); german version EN 28233:1990
  • DIN EN ISO 20029-1:2018-05 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 1: Designation system and basis for specification (ISO 20029-1:2017); German version EN ISO 20029-1:2018
  • DIN 78004-1:2021-03 Plastics - Thermoplastic styrene-based elastomers for moulding and extrusion - Part 1: Designation system and basis for specification
  • DIN ISO 1817:2016 Rubber, vulcanized or thermoplastic - Determination of the effect of liquids (ISO 1817:2015)
  • DIN EN 28233:1991-06 Thermoplastics valves; torques; test method (ISO 8233:1988); german version EN 28233:1990 / Note: To be replaced by DIN EN ISO 8233 (2020-09), DIN EN ISO 8233 (2023-02).
  • DIN EN 681-2:2006 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers (includes Amendments A1:2002 + A2:2005); English version of DIN EN 681-2:2006-11

SAE - SAE International, iso thermoplastic elastomer

Society of Automotive Engineers (SAE), iso thermoplastic elastomer

Group Standards of the People's Republic of China, iso thermoplastic elastomer

  • T/SHPTA 016-2021 Flame retardant thermoplastic elastomer materials for wire & cable
  • T/SDQE 010-2020 Taishan Quality Thermoplastic Elastomer Granules (TPV)
  • T/SHPTA 015-2021 Flame retardant thermoplastic polyurethane elastomer materials for wire & cable
  • T/HEBQIA 180-2023 Automobile cab thermoplastic elastomer floor mat
  • T/ZZB 2033-2021 Sports ground of thermoplastic elastomer surface in primary and secondary schools
  • T/SPUIA 0004-2023 Thermoplastic polyester elastomer seals for automotive chassis
  • T/SHPTA 051-2023 150℃temperature resistant thermoplastic polyester elastomer cable material
  • T/CPCIF 0200-2022 The norm of energy consumption per unit product of polypropylene thermoplastic elastomer
  • T/CPCIF 0201-2022 Assessment requirement for green factory in polypropylene thermoplastic elastomer industry
  • T/CPCIF 0199-2022 The norm of water intake per unit product of polypropylene thermoplastic elastomer
  • T/CSTM 00031-2020 Thermoplastic elastomer - Determination of the melt mass-flow rate and melt volume-flow rate
  • T/CPCIF 0202-2022 Technical specification for green-design product assessment— Polypropylene thermoplastic elastomer
  • T/CAMDI 003-2016 Styrene thermoplastic elastomer (TPE) special material for infusion and blood transfusion equipment
  • T/ZZB 1428-2019 Special thermoplastic elastomer cushion for heavy load freight buffer of railway rolling stock
  • T/SPUIA 0005-2023 Yellow resistant and highly transparent aliphatic polycaprolactone thermoplastic polyurethane elastomer
  • T/CAMDI 032-2020 Styrenic thermoplastic elastomers (TPE-S) compounds for plunger seal of syringes for single use
  • T/NBRTT 003-2023 Halogen-free flame retardant thermoplastic elastomer sheathing material for new energy vehicle charging pile cables
  • T/CAMDI 077-2022 Test method for residual of dicyclopentadiene from medical styrenic thermoplastic elastomer gas chromatography method
  • T/CNLIC 0029-2021 Green Design Product Evaluation Technical Specifications for Thermoplastic Polyolefin Elastomer (TPO) Composite Sheets for Automobiles

International Organization for Standardization (ISO), iso thermoplastic elastomer

  • ISO 18064:2022 Thermoplastic elastomers — Nomenclature and abbreviated terms
  • ISO 18064:2014 Thermoplastic elastomers - Nomenclature and abbreviated terms
  • ISO 18064:2003 Thermoplastic elastomers - Nomenclature and abbreviated terms
  • ISO 23673:2021 Plastics — Elasticity index — Determination of elastic property of melts
  • ISO 23711:2022 Elastomeric seals — Requirements for materials for pipe joint seals used in water and drainage applications — Thermoplastic elastomers
  • ISO/DIS 813-2:1972 Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — Part 2: Adhesion of a soft thermoplastic elastomer layer
  • ISO/FDIS 813-2:2023 Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — Part 2: Adhesion of a soft thermoplastic elastomer layer
  • ISO 14910-2:2013 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties
  • ISO 20029-2:2017 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion- Part 2:Preparation of test specimens and determination of properties
  • ISO 14910-1:2013 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 1: Designation system and basis for specification
  • ISO 20029-1:2017 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 1: Designation system and basis for specification
  • ISO 4662:2017 Rubber, vulcanized or thermoplastic - Determination of rebound resilience
  • ISO 4662:2009 Rubber, vulcanized or thermoplastic - Determination of rebound resilience
  • ISO 1133:1981 Plastics — Determination of the melt flow rate of thermoplastics

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, iso thermoplastic elastomer

  • GB/T 22027-2008 Thermoplastic elastomers.Nomenclature and abbreviated terms
  • GB/T 21874-2008 Elastomeric seals.Requirements for materials for pipe joint seals used in water and drainage applications.Thermoplastic elastomers
  • GB/T 26526-2011 Thermoplastic elastomers.Specification for low-smoke halogen-free flame retardant materials
  • GB/T 29616-2013 Thermoplastic elastomer.Determination of polycyclic aromatic hydrocarbons.Gas chromatography-mass spectrometry
  • GB/T 43128-2023 General technical specifications for aerospace thermoplastic polyurethane elastomer interlayer films
  • GB/T 21283.6-2015 Rotary shaft lip-type seals incorporating thermoplastic sealing elements.Part 6:Properties requirements for the thermoplastic and elastic material

American Society for Testing and Materials (ASTM), iso thermoplastic elastomer

  • ASTM D6436-08 Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers
  • ASTM D6436-14 Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers
  • ASTM D6436-14(2022) Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers
  • ASTM F913-02(2021) Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe
  • ASTM F913-95 Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe
  • ASTM D6436-02 Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers
  • ASTM D6436-99 Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers
  • ASTM D5538-98 Standard Practice for Thermoplastic Elastomers-Terminology and Abbreviations
  • ASTM D5538-02 Standard Practice for Thermoplastic Elastomers8212;Terminology and Abbreviations
  • ASTM D6835-02 Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)
  • ASTM D6835-08 Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)
  • ASTM D5538-07 Standard Practice for Thermoplastic Elastomers-Terminology and Abbreviations
  • ASTM D5538-13(2023) Standard Practice for Thermoplastic Elastomers—Terminology and Abbreviations
  • ASTM D412-06a(2013) Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomersmdash;Tension
  • ASTM D624-00(2012) Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
  • ASTM D5538-13(2018) Standard Practice for Thermoplastic Elastomers—Terminology and Abbreviations
  • ASTM D5538-13 Standard Practice for Thermoplastic Elastomersmdash;Terminology and Abbreviations
  • ASTM D6835-23 Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)
  • ASTM D6924-03(2007) Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges
  • ASTM D6924-03(2012) Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges
  • ASTM D412-06 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
  • ASTM D412-16e1 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
  • ASTM D412-16(2021) Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
  • ASTM D412-16 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
  • ASTM D412-15 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers&x2014;Tension
  • ASTM D412-15a Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers&x2014;Tension
  • ASTM D4474-00 Standard Classification System for Styrenic Thermoplastic Elastomer Injection Molding and Extrusion Materials (TES)
  • ASTM D4246-14(2020) Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation for Wire and Cable, 90 °C Operation
  • ASTM D6924-03 Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges
  • ASTM D624-00(2020) Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
  • ASTM D8156-18 Standard Classification System for and Basis of Specifications for Thermoplastic Elastomer Copolyester Molding and Extrusion Materials (TPC)
  • ASTM F913-02(2014) Standard Specification for Thermoplastic Elastomeric Seals 40;Gaskets41; for Joining Plastic Pipe
  • ASTM D6835-08(2014) Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials 40;TEEE41;
  • ASTM D624-00(2007) Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
  • ASTM D4246-02 Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90176C Operation
  • ASTM D624-00 Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
  • ASTM D624-00e1 Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
  • ASTM D4246-02(2010) Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90&176C Operation
  • ASTM D6924-03(2017) Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges
  • ASTM F2805-16 Standard Specification for Multilayer Thermoplastic And Flexible Steel Pipe And Connections
  • ASTM F913-02e1 Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe
  • ASTM F913-02 Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe
  • ASTM F913-01 Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe
  • ASTM F913-02(2008) Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe
  • ASTM D4245-97 Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90176C Dry/75176C Wet Operation
  • ASTM D4245-02 Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90176C Dry/75176C Wet Operation
  • ASTM D4245-21 Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90 ��C Dry/75 ��C Wet Operation
  • ASTM D4246-97 Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C Operation
  • ASTM D6835-17 Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)
  • ASTM D7605-11(2016) Standard Test Method for Thermoplastic Elastomers—Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
  • ASTM D7605-11(2022) Standard Test Method for Thermoplastic Elastomers—Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
  • ASTM D4246-14 Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C Operation

GM North America, iso thermoplastic elastomer

  • GM GMP.EEBC.016-2001 Thermoplastic Polyester Elastomer - 82 Type D Hardness
  • GM GMP.E/P.012-2001 Thermoplastic Elastomer Polyolefinic, Shore A80, Interior
  • GM GMP.E/P.066-1996 Thermoplastic Elastomer, - Polyolefinic, Interior, Shore A70
  • GM GMP.E/P.083-2002 Thermoplastic Elastomer Polyolefinic, Shore A35, Interior
  • GM GMP.E/P.065-2001 Thermoplastic Elastomer - Polyolefinic, Shore A47, HVAC Applications
  • GM GMP.E/P.044-2002 Thermoplastic Elastomer Polyolefinic, Shore A73, Interior, Integrally Colored
  • GM GMP.E/P.067-2002 Thermoplastic Elastomer Polyolefinic, Shore A87, Interior, Integrally Colored
  • GM GMP.E/P.071-2002 Thermoplastic Elastomer Polyolefinic, Shore A55, Interior, Integrally Colored
  • GM GMN8154-2003 Thermoplastic Elastomer Polyolefinic, Shore A65, Interior/Exterior
  • GM GMP.E/P.029-2001 Thermoplastic Elastomer Polyolefinic, Shore A67, Interior/Exterior
  • GM GMP.E/P.037-2001 Thermoplastic Elastomer Polyolefinic, Shore A87, Interior/Exterior
  • GM GMP.E/P.057-2002 Thermoplastic Elastomer Polyolefinic, Shore A73, Interior/Exterior
  • GM GMP.E/P.082-2002 Thermoplastic Elastomer Polyolefinic, Shore A62, Interior/Exterior
  • GM GMP.E/P.132-2003 Thermoplastic Elastomer Polyolefinic, Shore A75, Interior/Exterior
  • GM GMN7692-2001 Thermoplastic Elastomer Polyolefinic, Shore A55, Exterior, Extrusion Grade
  • GM GMP.TES.011-1997 Thermoplastic Elastomer - Styrene Block Copolymer, 65 Shore A
  • GM GMP.E/P.016-2002 Thermoplastic Elastomer Polyolefinic, Shore D50, Interior/Exterior, Integrally Colored
  • GM GMP.E/P.115-2003 Thermoplastic Elastomer Polyolefin Alloy, Shore A60, Interior, Integrally Colored
  • GM GMP.E/P.116-2003 Thermoplastic Elastomer Polyolefin Alloy, Shore A65, Interior, Integrally Colored
  • GM GMP.E/P.118-2003 Thermoplastic Elastomer Polyolefin Alloy, Shore A75, Interior, Integrally Colored
  • GM GMP.E/P.120-2002 Thermoplastic Elastomer Polyolefinic, Shore A80, Interior/Exterior, Integrally Colored
  • GM GMN3901-2001 Thermoplastic Elastomer Polyolefinic, Shore A65, Interior/Exterior, High Flow
  • GM GMN6706-2001 Thermoplastic Elastomer Polyolefinic, Shore A75, Interior/Exterior, High Flow
  • GM GMN3927-2002 Thermoplastic Elastomer - Polyolefinic, Shore A35, Underhood Applications
  • GM GMP.E/P.002-2001 Thermoplastic Elastomer - Polyolefinic, Shore A64, Underhood Applications
  • GM GMP.E/P.003-2001 Thermoplastic Elastomer - Polyolefinic, Shore A73, Underhood Applications
  • GM GMP.E/P.004-2002 Thermoplastic Elastomer - Polyolefinic, Shore A80, Underhood Applications
  • GM GMP.E/P.005-2001 Thermoplastic Elastomer - Polyolefinic, Shore A87, Underhood Applications
  • GM GMP.E/P.006-2002 Thermoplastic Elastomer - Polyolefinic, Shore D40, Underhood Applications
  • GM GMP.E/P.007-2002 Thermoplastic Elastomer - Polyolefinic, Shore D50, Underhood Applications
  • GMP.EEBC.013-2002 Thermoplastic Polyester Elastomer - 49 Type D Hardness, 87 MPa Flexural Modulus
  • GMP.TES.002-2005 Thermoplastic Elastomer ?Styrene Block Copolymer, Shore A60, Interior Revision C
  • GM 9984280-2004 Interior Paint for Thermoplastic Polyolefin Elastomer (E/P) (Replaced By GMN11013)
  • GM GMP.TES.002-2002 Thermoplastic Elastomer Styrene Block Copolymer, Shore A60, Interior
  • GM GMP.E/P.117-2003 Thermoplastic Elastomer Polyolefin Alloy, Shore A70, Interior, Integrally Colored
  • GM GMP.EEBC.017-2002 Thermoplastic Polyester Elastomer - 55 Type D Hardness, 200 MPa Flexural Modulus, Heat Stabilized
  • GM GMP.EEBC.003-2001 Thermoplastic Polyester Elastomer - 73 Type D Hardness, 560 MPa Flexural Modulus
  • GM GMP.EEBC.004-2001 Thermoplastic Polyester Elastomer - 47 Type D Hardness, 90 MPa Flexural Modulus
  • GM GMP.EEBC.007-2002 Thermoplastic Polyester Elastomer - 62 Type D Hardness, 300 MPa Flexural Modulus
  • GM GMP.EEBC.008-2001 Thermoplastic Polyester Elastomer - 55 Type D Hardness, 200 MPa Flexural Modulus
  • GM GMP.EEBC.012-2002 Thermoplastic Polyester Elastomer - 49 Type D Hardness, 195 MPa Flexural Modulus
  • GM GMP.EEBC.013-2002 Thermoplastic Polyester Elastomer - 49 Type D Hardness, 87 MPa Flexural Modulus
  • GM GMP.EEBC.014-2001 Thermoplastic Polyester Elastomer - 55 Type D Hardness, 520 MPa Flexural Modulus
  • GM GMP.EEBC.015-2001 Thermoplastic Polyester Elastomer - 55 Type D Hardness, 400 MPa Flexural Modulus
  • GM GMP.E/P.001-2003 Thermoplastic Elastomer Polyolefinic, Shore A55, Underhood and Interior Applications
  • GM GMP.E/P.136-2003 Thermoplastic Elastomer Polyolefin Alloy, Shore A75, Interior, Integrally Colored, Extrusion Grade
  • GM GMP.TES.023-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A35, Interior, Integrally Colored
  • GMP.E/P.136-2005 Thermoplastic Elastomer - Polyolefin Alloy, Shore A67, Interior, Integrally Colored, Extrusion Grade Revision B
  • GM GMN7304-2002 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A70, Interior/Exterior
  • GM GMP.TECEA.001-2001 Thermoplastic Elastomer - Chlorinated Ethylene Alloy, Interior/Exterior Applications, Shore A60
  • GM GMP.TECEA.004-1996 Thermoplastic Elastomer - Chlorinated Ethylene Alloy, Interior/Exterior Applications, Shore A68
  • GM GMP.TECEA.005-1997 Thermoplastic Elastomer - Chlorinated Ethylene Alloy, Interior/Exterior, Shore A77
  • GM GMP.TES.013-2003 Thermoplastic Elastomer Styrene Block Copolymer, Shore A60, Interior/Exterior
  • GM GMP.TES.027-2004 Thermoplastic Elastomer - Styrenic Block Copolymer, Shore A70, Interior/Exterior, Integrally Colored
  • GM GMP.EEBC.001-2004 Thermoplastic Elastomer - Polyester, Shore D36, 45 MPa Flexural Modulus
  • GM GMP.E/P.126-2002 Thermoplastic Elastomer - Polyolefin Alloy, Shore A79, Interior/Exterior, EPDM Bondable
  • GM GMP.E/P.138-2003 Thermoplastic Elastomer - Polyolefin Alloy, Shore A65, Interior/Exterior, EPDM Bondable
  • GM GMP.E/P.033-2001 Thermoplastic Elastomer - Polyolefinic, Shore D40
  • GM GMP.EEBC.002-1994 Thermoplastic Polyester Elastomer - 42 Type D Durometer Hardness, 60 MPa Flexural Modulus
  • GM GMP.E/P.078-2001 Thermoplastic Elastomer Polyolefinic, Shore A50, Interior/Exterior and Underhood Applications
  • GM GMP.E/P.090-2001 Thermoplastic Elastomer - Polyolefinic, Shore A87, Barium Sulfate Filled Underhood Applications
  • GM GMP.E/P.137-2003 Thermoplastic Elastomer - Polyolefinic, Shore A47, Interior/Exterior, and Underhood Applications
  • GM GMN8098-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore D38, Interior
  • GM GMN6872-2001 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A90, Interior, Paintable
  • GMP.TES.014-2005 Thermoplastic Elastomer - Styrene Block Copolymer, Shore D34, 240 MPa Flexural Modulus, Interior, Integrally Colored Revision B
  • GM GMN6704-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A60, Interior, Integrally Colored
  • GM GMP.TES.004-2002 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A73, Interior, UV Stabilized, Integrally Colored
  • GM GMP.TES.001-2002 Thermoplastic Elastomer Styrene Block Copolymer, Shore A47, Interior
  • GM GMP.TEO+PA6.001-2001 Thermoplastic Elastomer - Polyolefinic + Nylon Blend, Shore A55, Underhood and Interior Applications
  • GM GMN7305-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore D40, 160 MPa Flexural Modulus, Interior, Integrally Colored
  • GM GMP.TES.012-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A89, 100 MPa Flexural Modulus, Interior, Integrally Colored
  • GM GMP.TES.014-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A93, 240 MPa Flexural Modulus, Interior, Integrally Colored
  • GM GMN7303-2002 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A85, Interior/Exterior
  • GM GMN7396-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A85, Interior/Exterior
  • GM GMP.TES.026-2003 Thermoplastic Elastomer - Styrenic Block Copolymer, Shore A90, Interior/Exterior
  • GMP.TES.030-2007 Thermoplastic Elastomer , Styrenic Block Copolymer, Shore D35, Interior, Paintable
  • GM GMP.TEO+PA.001-1998 Thermoplastic Elastomer, Polyolefinic+Nylon Blend - for Underhood Applications, Shore A 55
  • GM GMP.TES.025-2003 Thermoplastic Elastomer - Styrenic Block Copolymer, Shore A80, Interior/Exterior, Integrally Colored
  • GM GM9301P-1989 Test for Intrinsic Melt Viscosity of Thermoplastic Resins
  • GM GMP.EEBC.018-2003 Thermoplastic Polyester Elastomer - 48 Type D Hardness, 170 MPa Flexural Modulus, Lubricated Modulus, Lubricated
  • GM GMP.TES.015-2000 Thermoplastic Elastomer - Styrene Block Copolymer Interior, , Shore A 50, Paintable
  • GM GMP.E/P.033-2012 Thermoplastic Elastomer - Polyolefinic, Shore D40 (Issue 1; Do Not Use on New Programs; No Replacement)
  • GM GMP.TES.006-2002 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A89, Barium Sulfate Filled, Underhood Applications
  • GM GMP.E/P.081-2002 Thermoplastic Elastomer Polyolefinic, Shore A70, Underhood Applications

国家市场监督管理总局、中国国家标准化管理委员会, iso thermoplastic elastomer

  • GB/T 38352-2019 Thermoplastic elastomers—Designation and specification for premixture
  • GB/T 38273.2-2019 Plastics—Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion—Part 2: Preparation of test specimens and determination of properties
  • GB/T 38273.1-2019 Plastics—Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion—Part 1:Designation system and basis for specification
  • GB/T 40322-2021 Thermoplastic elastomer—Specifications of door sealmaterials for household and similar refrigerating appliances

Danish Standards Foundation, iso thermoplastic elastomer

  • DS/EN ISO 18064:2005 Thermoplastic elastomers - Nomenclature and abbreviated terms
  • DS/EN ISO 14910-2:2013 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties
  • DS/EN ISO 14910-1:2013 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 1: Designation system and basis for specification
  • DS/EN 681-2/A2:2005 Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers
  • DS/EN 681-2/A1:2003 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers
  • DS/EN 681-2:2000 Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers

Korean Agency for Technology and Standards (KATS), iso thermoplastic elastomer

  • KS M 3824-2008(2018) Testing methods for thermoplastic polyurethane elastomers
  • KS M ISO 23711-2007(2017) Elastomeric seals-Requirements for materials for pipe joint seals used in water and drainage applications-Thermoplastic elastomers
  • KS M ISO 23711-2007(2022) Elastomeric seals-Requirements for materials for pipe joint seals used in water and drainage applications-Thermoplastic elastomers
  • KS M ISO 4662:2020 Rubber, vulcanized or thermoplastic — Determination of rebound resilience
  • KS M 3824-2008 Testing methods for thermoplastic polyurethane elastomers
  • KS M ISO 1167:2003 Thermoplastics pipes for the conveyance of fluids-Resistance to internal pressure-Test method
  • KS M ISO 1167:2014 Thermoplastics pipes for the conveyance of fluids-Resistance to internal pressure-Test method

Professional Standard - Traffic, iso thermoplastic elastomer

  • JT/T 1089-2016 Modified materials in pavement asphalt.Thermoplastic elastomers based on the waste rubber and plastic

Association Francaise de Normalisation, iso thermoplastic elastomer

  • NF T40-003:2005 Thermoplastic elastomers - Nomenclature and abbreviated terms.
  • NF T40-003*NF EN ISO 18064:2015 Thermoplastic elastomers - Nomenclature and abbreviated terms
  • NF EN ISO 18064:2022 Elastomères thermoplastiques - Nomenclature et termes abrégés
  • NF ISO 4662:2017 Caoutchouc vulcanisé ou thermoplastique - Détermination de la résilience de rebondissement
  • NF T46-036:2009 Rubber, vulanized or thermoplastic - Determination of rebound resilience.
  • NF T50-010-2:2013 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: preparation of test specimens and determination of properties
  • NF T46-036*NF ISO 4662:2017 Rubber, vulcanized or thermoplastic - Determination of rebound resilience
  • NF EN 14565:2019 Revêtements de sol résilients - Revêtements de sol à base de polymères thermoplastiques synthétiques - Spécification
  • NF T50-010-2*NF EN ISO 20029-2:2018 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2 : preparation of test specimen and determination of properties
  • NF T50-010-1*NF EN ISO 20029-1:2018 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 1 : designation system and basis for specification
  • NF EN 681-2/A1:2003 Garnitures d'étanchéité en caoutchouc - Spécification des matériaux pour garnitures d'étanchéité utilisées dans le domaine de l'eau et du drainage - Partie 2 : élastomères thermoplastiques
  • NF T50-010-1:2013 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 1: designation system and basis for specifications
  • NF EN 13956:2013 Feuilles souples d'étanchéité - Feuilles d'étanchéité de toiture plastiques et élastomères - Définitions et caractéristiques
  • NF EN 681-2/A2:2005 Garnitures d'étanchéité en caoutchouc - Spécification des matériaux pour garnitures d'étanchéité pour joints de canalisations utilisées dans le domaine de l'eau et de l'évacuation - Partie 2 : élastomères thermoplastiques
  • NF EN 681-2:2000 Garnitures d'étanchéité en caoutchouc - Spécification des matériaux pour garnitures d'étanchéité pour joints de canalisations utilisées dans le domaine de l'eau et de l'évacuation - Partie 2 : élastomères thermoplastiques
  • NF EN ISO 20029-2:2018 Plastiques - Élastomères thermoplastiques à base de polyester/ester et polyéther/ester pour moulage et extrusion - Partie 2 : préparation des éprouvettes et détermination des propriétés

Japanese Industrial Standards Committee (JISC), iso thermoplastic elastomer

  • JIS K 6418:2007 Thermoplastic elastomers -- Nomenclature and abbreviated terms
  • JIS K 7311:1995 Testing methods for thermoplastic polyurethane elastomers
  • JIS K 7312:1996 Physical testing methods for molded products of thermosetting polyurethane elastomers
  • JIS K 7314-1:1999 Plastics -- Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion -- Part 1: Designation system and basis for specifications
  • JIS K 7314-2:1999 Plastics -- Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion -- Part 2: Preparation of test specimens and determination of properties
  • JIS K 6255:2013 Rubber, vulcanized or thermoplastic.Determination of rebound resilience

ES-UNE, iso thermoplastic elastomer

American National Standards Institute (ANSI), iso thermoplastic elastomer

Indonesia Standards, iso thermoplastic elastomer

ZA-SANS, iso thermoplastic elastomer

  • SANS 23711:2008 Elastomeric seals - Requirements for materials for pipe joint seals used in water and drainage applications - Thermoplastic elastomers

GOSTR, iso thermoplastic elastomer

  • GOST R 59150-2020 Vapor-insulating flexible polymeric materials (thermoplastic and elastomeric). General specifications
  • GOST R 59122-2020 Roofing handwork. Roof installation with flexible sheet (thermoplastic or elastomer) waterproofing. Rules and control of work
  • GOST 34362.2-2017 Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion. Part 2. Preparation of test specimens and determination of properties
  • GOST R ISO 1431-1-2019 Rubber and thermoplastic elastomers. Resistance to ozone cracking. Part 1. Static and dynamic tensile strain testing

RU-GOST R, iso thermoplastic elastomer

  • GOST R 54553-2019 Vulcanized rubber and thermoplastic elastomers. Determination of tensile stress-strain properties
  • GOST R 54553-2011 Vulcanized rubber and thermoplastic elastomers. Determination of tensile stress-strain properties
  • GOST EN 1928-2011 Roofing and hydraulic-insulating flexible bitumen-based and polymeric (thermoplastic or elastomer) materials. Method for determination of watertightness
  • GOST 34362.1-2017 Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion. Part 1. Designation system
  • GOST EN 13416-2011 Roofing and hydraulic-insulating flexible bitumen-based and polymeric (thermoplastie or elastomer) materials. Rules for sampling
  • GOST R 57417-2017 Roofing and hydraulic-insulating flexible polymeric (thermoplastic or elastomer) materials. General specifications
  • GOST EN 1107-2-2011 Roofing and hydraulic-insulating flexible polymeric (thermoplastic or elastomer) materials. Method for determination of linear dimensional change
  • GOST EN 12730-2011 Roofing and hydraulic-insulating flexible bitumen-based and polymeric (thermoplastic or elastomer) materials. Method for determination of resistance to static loading
  • GOST 31899-2-2011 Roofing and hydraulic-insulating flexible polymeric (thermoplastic or elastomer) materials. Methods for determination of deformation and strength prorerties
  • GOST 31899-1-2011 Roofing and hydraulic-insulating flexible bitumen-based materials. Method for determination of deformation and strength properties
  • GOST EN 1850-2-2011 Roofing and hydraulic-insulating flexible polymeric (thermoplastic or elastomer) materials. Method for determination of visual defects
  • GOST R 56911-2016 Roofing and hydraulic-insulating flexible polymeric (thermoplastic or elastomer) materials. Method for determination of shear resistance of joints
  • GOST R 56583-2015 Roofing and hydraulic-insulating flexible polymeric (thermoplastic or elastomer) materials. Method for determination of resistance to tearing
  • GOST R 57416-2017 Roofing and hydraulic-insulating flexible polymeric (thermoplastic or elastomer) materials. Method for determination of resistance to ozone
  • GOST R 57415-2017 Roofing and hydraulic-insulating flexible polymeric (thermoplastic or elastomer) materials. Method for exposure to bitumen
  • GOST 31897-2011 Roofing and hydraulic-insulating flexible bitumen-based and polymeric (thermoplastic or elastomer) materials. Method for determination of resistance to dynamic loading
  • GOST R 56584-2015 Roofing and hydraulic-insulating flexible polymeric (thermoplastic or elastomer) materials. Method for determination of peel resistance of welded and adhecive joints
  • GOST R 57414-2017 Roofing and hydraulic-insulating flexible bituminous and polymeric (thermoplastic or elastomer) materials. Method for determination of hair resistance

Professional Standard - Chemical Industry, iso thermoplastic elastomer

  • HG/T 5113-2016 Thermoplastic elastomer.TPS Compound for wire and cable uses
  • HG/T 4903-2016 Dynamically full vulcanized thermoplastic elastomer (TPV).Ethylene-propylene-diene/polypropylene type

Association of German Mechanical Engineers, iso thermoplastic elastomer

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, iso thermoplastic elastomer

  • GB/T 34692-2017 Thermoplastic elastomer—Determination of halogen—Oxygen bomb combustion-ion chromatography
  • GB/T 34715-2017 Thermoplastic elastomer—Determination of phthalates—Gas chromatography-mass spectrometry
  • GB/T 33422-2016 Thermoplastic elastomer—Determination of heavy metal contents— Inductively coupled plasma atomic emission spectrometric method

Professional Standard - Petrochemical Industry, iso thermoplastic elastomer

  • SH/T 1610-2011 Thermoplastic elastomers.Styrene-butadiene block copolymer

国家能源局, iso thermoplastic elastomer

  • SH/T 1812-2017 Thermoplastic elastomer styrene-isoprene block copolymer (SIS)

工业和信息化部, iso thermoplastic elastomer

  • QB/T 5351-2018 General technical conditions for thermoplastic polyurethane elastomer (TPU) artificial leather
  • YD/T 3431-2018 Sheath material thermoplastic polyurethane elastomer for communication cable optical cable
  • YD/T 1118.4-2022 Secondary coating materials for optical fibers Part 4: Thermoplastic polyester elastomers
  • QB/T 5370-2019 Thermoplastic elastomer door seals for household and similar refrigeration appliances
  • JB/T 13593-2018 Fluoroelastomer heat shrinkable tube for electrical use

RO-ASRO, iso thermoplastic elastomer

Professional Standard - Automobile, iso thermoplastic elastomer

  • QC/T 797-2008 Material identification & marking of automotive plastic, rubber & thermoplastic elastomer parts

GM Global, iso thermoplastic elastomer

  • GMW 15815-2013 Thermoplastic Elastomers - Polyolefinic Plus Nitrile Rubber Based Issue 2; English
  • GMW 15813-2012 Thermoplastic Elastomers - Polyolefinic, Fully Crosslinked, General Purpose, Underhood Issue 2; English
  • GMW 16088-2012 Thermoplastic Elastomers - Chlorinated Ethylene Alloy, Exterior Issue 2; English
  • GMW 16973-2013 Coefficient of Linear Thermal Expansion (CLTE) for Elastomers Issue 1; English
  • GMW 16233-2012 Thermoplastic Elastomers ?Styrenic, Exterior Issue 3; English

GM Holden Ltd, iso thermoplastic elastomer

United States Navy, iso thermoplastic elastomer

KR-KS, iso thermoplastic elastomer

  • KS M ISO 4662-2020 Rubber, vulcanized or thermoplastic — Determination of rebound resilience

Fujian Provincial Standard of the People's Republic of China, iso thermoplastic elastomer

  • DB35/T 1781-2018 General Specifications for Thermoplastic Polyurethane Elastomer (TPU) Composites for Packaging

PL-PKN, iso thermoplastic elastomer

  • PN-EN ISO 13259-2021-01 E Thermoplastics piping systems for underground non-pressure applications--Test method for leaktightness of elastomeric sealing ring type joints (ISO 13259:2020)

CEN - European Committee for Standardization, iso thermoplastic elastomer

  • EN ISO 14910-2:2006 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties
  • EN ISO 20029-2:2018 Plastics - Thermoplastic polyester/ester and polyether/ ester elastomers for moulding and extrusion - Part 2: Preparation of test specimen and determination of properties
  • EN ISO 14910-1:2006 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 1: Designation system and basis for specifications
  • EN ISO 1133:2005 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
  • EN ISO 1133:1999 Plastics - Determination of the Melt Mass-Flow Rate (MFR) and the Melt Volume-Flow Rate (MVR) of Thermoplastics

BR-ABNT, iso thermoplastic elastomer

CH-SNV, iso thermoplastic elastomer

  • SN EN ISO 13259:2020 Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints (ISO 13259:2020)

Taiwan Provincial Standard of the People's Republic of China, iso thermoplastic elastomer

  • CNS 3561-2007 Methods of test for rebound resilience of rubber, vulcanized or thermoplastic

CL-INN, iso thermoplastic elastomer

HU-MSZT, iso thermoplastic elastomer

YU-JUS, iso thermoplastic elastomer

  • JUS G.S2.550-1997 Plastics - Determination of brittleness temperature of plastics and elastomers - Impact break method

未注明发布机构, iso thermoplastic elastomer

  • DIN EN 681-2:2003 Elastomeric seals — Material requirements for pipe joint seals used in water and drainage applications — Part 2: Thermoplastic elastomers

NL-NEN, iso thermoplastic elastomer





Copyright ©2007-2023 ANTPEDIA, All Rights Reserved