ZH
RU
ES
thermoplastic elastomer
thermoplastic elastomer, Total:327 items.
In the international standard classification, thermoplastic elastomer involves: Insulating materials, Plastics, Road vehicle systems, Rubber, Vocabularies, Road engineering, Pipeline components and pipelines, Rubber and plastics products, Education, Waxes, bituminous materials and other petroleum products, Environmental protection, Chipless working equipment, Raw materials for rubber and plastics, Terminology (principles and coordination), Kitchen equipment, Installations in buildings, Medical sciences and health care facilities in general, Medical equipment, Cellular materials, Electrical wires and cables, Construction materials, Seals, glands.
International Federation of Trucks and Engines, thermoplastic elastomer
Hebei Provincial Standard of the People's Republic of China, thermoplastic elastomer
- DB13/T 1512-2012 thermoplastic elastomer cable compound
- DB13/T 2539-2017 Waste rubber and plastic based thermoplastic elastomer modified asphalt
- DB13/T 2641-2018 Construction technical specification for highway waste rubber and plastic based thermoplastic elastomer modified asphalt pavement
SAE - SAE International, thermoplastic elastomer
Society of Automotive Engineers (SAE), thermoplastic elastomer
SE-SIS, thermoplastic elastomer
- SIS SS 16 26 02-1983 Elastomers (Rubber and thermoplastic elastomers) - General information
- SIS SS 16 22 22-1986 Rubber and thermoplastic elastomer - Evaluation of flame resistance
- SIS SS 16 22 15-1986 Rubber and thermoplastic elastomer - Determination of rebound resilience
- SIS SS 16 22 04-1986 Rubber and thermoplastic elastomer - Determination of compression set
- SIS SS 16 22 09-1986 Rubber and thermoplastic elastomer - Determination of tension set
- SIS SS 16 22 13-1986 Rubber and thermoplastic elastomer - Evaluation of corrosion of steel in wet atmosphere
- SIS SS 16 22 16-1986 Rubber and thermoplastic elastomer - Low temperature stiffening (Gehman test) - Determination
- SIS SS 16 22 10-1986 Rubber and thermoplastic elastomer - Resistance to ozone cracking - Static strain test
- SIS SS 16 22 27-1986 Rubber and thermoplastic elastomer - Conducting and antistatic materials - Measurement of resistivity
- SIS SS 16 22 03-1986 Rubber and thermoplastic elastomer - Determination of tear strength (trouser and crescent test pieces)
- SIS SS 3638-1990 Plastics pipes — Sealing rings of thermoplastic elastomers ITPE) for plastic discharge, drainage and sewage pipe systems
International Truck and Engine Corporation (ITEC), thermoplastic elastomer
(U.S.) Ford Automotive Standards, thermoplastic elastomer
- FORD WSD-M5G57-A-1993 BARRIER, ACOUSTICAL, THERMOPLASTIC ELASTOMER (EVAC)
- FORD WSS-M4D964-A3-2011 THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSB-M2D452-A-2004 THERMOPLASTIC ELASTOMER (TEEE) MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M4D529-A-2005 POLYETHER BLOCK AMIDE (PEBA) THERMOPLASTIC ELASTOMER MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2D501-A-2009 THERMOPLASTIC ELASTOMER (TEEE) MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M4D529-A-2010 POLYETHER BLOCK AMIDE (PEBA) THERMOPLASTIC ELASTOMER MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M99D63-A3-2006 THERMOPLASTIC ELASTOMER, FLOOR COVERING, GRAINED, SHAPED ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2D505-A6-2003 THERMOPLASTIC ELASTOMER, POLYOLEFIN EP RUBBER MODIFIED (TEO), 55 DUROMETER D HARDNESS, EXTERIOR APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2D516-A1-2014 THERMOPLASTIC ELASTOMER (TPS), STYRENE BLOCK COPOLYMER, 40 DUROMETER, UNDERHOOD ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2D516-A1-2021 THERMOPLASTIC ELASTOMER (TPS), STYRENE BLOCK COPOLYMER, 40 DUROMETER, UNDERHOOD ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD SK-M4D9940-A-2000 THERMOPLASTIC POLYOLEFINE ELASTOMER, SEMI RIGID
- FORD SA-M4D9945-A-1994 THERMOPLASTIC POLYOLEFINE ELASTOMER, SEMI RIGID
- FORD WSB-M4D735-A-2005 THERMOPLASTIC POLYURETHANE ELASTOMER (TPU), 15% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSB-M2D462-A1-2010 THERMOPLASTIC ELASTOMER, CHLORINATED ETHYLENE [TE(PE-C)], 60 A HARDNESS, EXTERIOR ONLY ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2D507-A-2020 THERMOPLASTIC ELASTOMER (TES) STYRENE BLOCK COPOLYMER 45 DUROMETER A HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2D381-A4-2009 THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2D507-A6-2004 THERMOPLASTIC ELASTOMER (TES) STYRENE BLOCK COPOLYMER 25 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSD-M2D378-A7-2004 THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED 87 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSL-M4D655-A-2005 THERMOPLASTIC ETHER ESTER ELASTOMER + POLYBUTYLENE TEREPHTHALATE (TEEE+PBT) BLEND MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2D517-A2-2014 THERMOPLASTIC ELASTOMER (TPS) STYRENE BLOCK COPOLYMER, MEDIUM HEAT RESISTANT 50 DUROMETER A HARDNESS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2D517-A2-2020 THERMOPLASTIC ELASTOMER (TPS) STYRENE BLOCK COPOLYMER, MEDIUM HEAT RESISTANT 50 DUROMETER A HARDNESS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSB-M2D452-A2-2004 THERMOPLASTIC ELASTOMER (TEEE) MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSB-M2D452-A)
- FORD WSB-M2D452-A3-2004 THERMOPLASTIC ELASTOMER (TEEE) MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on WSB-M2D452-A
- FORD WSK-M4D873-A2-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), 10% MINERAL FILLED, PAINTABLE VIRGIN AND/OR RECYCLATE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESK-M4D498-A-2010 POLYURETHANE, THERMOPLASTIC ELASTOMER, 20 % GLASS FIBER, DUROMETER D 67 ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2D507-B4-2014 THERMOPLASTIC ELASTOMER (TPS) STYRENE BLOCK COPOLYMER, 70 DUROMETER A HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M1L126-A1-2003 CABLE, LOW TENSION, TPE INSULATED, 150 °C, THIN WALL, BARE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSD-M2D379-A6-2004 THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED 76 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSD-M2D378-A6)
- FORD WSS-M2D378-B1-2004 THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED EXTERIOR WEATHERABLE 60 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSD-M2D379-A2-2020 THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED MODERATE HEAT RESISTANT 69 DUROMETER A HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSD-M96D16-A-1988 THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED MODERATE HEAT RESISTANT 69 DUROMETER A HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSD-M2D378-A6-2004 THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED 66 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2D474-A2-2004 THERMOPLASTIC ELASTOMER (TES) STYRENE BLOCK COPOLYMER, 60 DUROMETER A HARDNESS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D975-A-2010 THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND AIRBAG COVER, 87 A DUROMETER HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D966-A-2010 THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND, (TEEE + PBT) INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2D516-A2-2021 THERMOPLASTIC ELASTOMER (TPS), STYRENE BLOCK COPOLYMER, 50 DUROMETER, UNDERHOOD ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2D516-A1)
- FORD ESB-M2D296-A-2004 THERMOPLASTIC ELASTOMER, STYRENE POLYOLEFIN BLOCK COPOLYMER - INJECTION AND EXTRUSION COMPOUND - ELECTRICAL GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M2D296-A-2009 THERMOPLASTIC ELASTOMER, STYRENE POLYOLEFIN BLOCK COPOLYMER - INJECTION AND EXTRUSION COMPOUND - ELECTRICAL GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSB-M2D477-A-2004 THERMOPLASTIC ELASTOMER MOLDING COMPOUND, EXTERIOR, PVC AND NITRILE RUBBER MOLECULAR BLEND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2D505-A-2004 THERMOPLASTIC ELASTOMER (TES) STYRENE BLOCK COPOLYMER, 40 DUROMETER D HARDNESS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2D506-A-2004 THERMOPLASTIC ELASTOMER (TES + TPU) STYRENE BLOCK COPOLYMER 65 DUROMETER A HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2D507-A-2004 THERMOPLASTIC ELASTOMER (TES) STYRENE BLOCK COPOLYMER 45 DUROMETER A HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2D505-A7-2013 THERMOPLASTIC ELASTOMER, STYRENE POLYOLEFIN BLOCK COPOLYMER (TES), 49 DUROMETER A HARDNESS, EXTERIOR WEATHERABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M2D505-A7-2020 THERMOPLASTIC ELASTOMER, STYRENE POLYOLEFIN BLOCK COPOLYMER (TES), 49 DUROMETER A HARDNESS, EXTERIOR WEATHERABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
Group Standards of the People's Republic of China, thermoplastic elastomer
- T/SHPTA 016-2021 Flame retardant thermoplastic elastomer materials for wire & cable
- T/SDQE 010-2020 Taishan Quality Thermoplastic Elastomer Granules (TPV)
- T/HEBQIA 180-2023 Automobile cab thermoplastic elastomer floor mat
- T/ZZB 2033-2021 Sports ground of thermoplastic elastomer surface in primary and secondary schools
- T/CPCIF 0200-2022 The norm of energy consumption per unit product of polypropylene thermoplastic elastomer
- T/CPCIF 0201-2022 Assessment requirement for green factory in polypropylene thermoplastic elastomer industry
- T/CPCIF 0199-2022 The norm of water intake per unit product of polypropylene thermoplastic elastomer
- T/CPCIF 0202-2022 Technical specification for green-design product assessment— Polypropylene thermoplastic elastomer
- T/CAMDI 003-2016 Styrene thermoplastic elastomer (TPE) special material for infusion and blood transfusion equipment
- T/ZZB 1428-2019 Special thermoplastic elastomer cushion for heavy load freight buffer of railway rolling stock
- T/NBRTT 003-2023 Halogen-free flame retardant thermoplastic elastomer sheathing material for new energy vehicle charging pile cables
- T/CSTM 00031-2020 Thermoplastic elastomer - Determination of the melt mass-flow rate and melt volume-flow rate
- T/CAMDI 032-2020 Styrenic thermoplastic elastomers (TPE-S) compounds for plunger seal of syringes for single use
- T/CAMDI 077-2022 Test method for residual of dicyclopentadiene from medical styrenic thermoplastic elastomer gas chromatography method
- T/EQTA 001-2020 PVC-NBR thermoplastic elastomer insulated and sheathed power flexible cables with rated voltage 0.6/1kV and below
GM Europe, thermoplastic elastomer
International Organization for Standardization (ISO), thermoplastic elastomer
- ISO 18064:2022 Thermoplastic elastomers — Nomenclature and abbreviated terms
- ISO 23711:2022 Elastomeric seals — Requirements for materials for pipe joint seals used in water and drainage applications — Thermoplastic elastomers
- ISO/DIS 813-2:1972 Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — Part 2: Adhesion of a soft thermoplastic elastomer layer
- ISO/FDIS 813-2:2023 Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — Part 2: Adhesion of a soft thermoplastic elastomer layer
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, thermoplastic elastomer
- GB/T 22027-2008 Thermoplastic elastomers.Nomenclature and abbreviated terms
- GB/T 26526-2011 Thermoplastic elastomers.Specification for low-smoke halogen-free flame retardant materials
- GB/T 29616-2013 Thermoplastic elastomer.Determination of polycyclic aromatic hydrocarbons.Gas chromatography-mass spectrometry
- GB/T 21874-2008 Elastomeric seals.Requirements for materials for pipe joint seals used in water and drainage applications.Thermoplastic elastomers
European Committee for Standardization (CEN), thermoplastic elastomer
- EN ISO 18064:2014 Thermoplastic elastomers - Nomenclature and abbreviated terms (ISO 18064:2014)
- EN ISO 18064:2022 Thermoplastic elastomers - Nomenclature and abbreviated terms (ISO 18064:2022)
- EN ISO 18064:2005 Thermoplastic elastomers - Nomenclature and abbreviated terms
- prEN ISO 18064:2021 Thermoplastic elastomers - Nomenclature and abbreviated terms (ISO/DIS 18064:2021)
国家市场监督管理总局、中国国家标准化管理委员会, thermoplastic elastomer
- GB/T 38352-2019 Thermoplastic elastomers—Designation and specification for premixture
- GB/T 40322-2021 Thermoplastic elastomer—Specifications of door sealmaterials for household and similar refrigerating appliances
Danish Standards Foundation, thermoplastic elastomer
- DS/EN ISO 18064:2005 Thermoplastic elastomers - Nomenclature and abbreviated terms
- DS/EN 681-2/A2:2005 Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers
- DS/EN 681-2/A1:2003 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers
- DS/EN 681-2:2000 Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers
German Institute for Standardization, thermoplastic elastomer
- DIN EN ISO 18064:2005 Thermoplastic elastomers - Nomenclature and abbreviated terms (ISO 18064:2003); German version EN ISO 18064:2005
- DIN EN ISO 18064:2022-08 Thermoplastic elastomers - Nomenclature and abbreviated terms (ISO 18064:2022); German version EN ISO 18064:2022
- DIN EN ISO 18064:2021 Thermoplastic elastomers - Nomenclature and abbreviated terms (ISO/DIS 18064:2021); German and English version prEN 18064:2021
- DIN EN ISO 18064:2015 Thermoplastic elastomers - Nomenclature and abbreviated terms (ISO18064:2014); German version EN ISO 18064:2014
- DIN EN 681-2:2006-11 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers; German version EN 681-2:2000 + A1:2002 + A2:2005
American Society for Testing and Materials (ASTM), thermoplastic elastomer
- ASTM F913-02(2021) Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe
- ASTM F913-95 Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe
- ASTM D6436-08 Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers
- ASTM D5538-98 Standard Practice for Thermoplastic Elastomers-Terminology and Abbreviations
- ASTM D6436-14 Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers
- ASTM D6436-14(2022) Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers
- ASTM D5538-02 Standard Practice for Thermoplastic Elastomers8212;Terminology and Abbreviations
- ASTM D5538-07 Standard Practice for Thermoplastic Elastomers-Terminology and Abbreviations
- ASTM D5538-13(2023) Standard Practice for Thermoplastic Elastomers—Terminology and Abbreviations
- ASTM D412-06a(2013) Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomersmdash;Tension
- ASTM D5538-13(2018) Standard Practice for Thermoplastic Elastomers—Terminology and Abbreviations
- ASTM D5538-13 Standard Practice for Thermoplastic Elastomersmdash;Terminology and Abbreviations
- ASTM D412-06 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
- ASTM D412-16e1 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
- ASTM D412-16(2021) Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
- ASTM D412-16 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
- ASTM D412-15 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers&x2014;Tension
- ASTM D412-15a Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers&x2014;Tension
- ASTM D624-00(2012) Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
- ASTM D6835-23 Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)
- ASTM D4474-00 Standard Classification System for Styrenic Thermoplastic Elastomer Injection Molding and Extrusion Materials (TES)
- ASTM D4246-14(2020) Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation for Wire and Cable, 90 °C Operation
- ASTM D624-00(2020) Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
- ASTM D624-00(2007) Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
- ASTM D4246-02 Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90176C Operation
- ASTM D624-00 Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
- ASTM D624-00e1 Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
- ASTM D4246-02(2010) Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90&176C Operation
- ASTM D8156-18 Standard Classification System for and Basis of Specifications for Thermoplastic Elastomer Copolyester Molding and Extrusion Materials (TPC)
- ASTM D4245-97 Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90176C Dry/75176C Wet Operation
- ASTM D4245-02 Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90176C Dry/75176C Wet Operation
- ASTM D4245-21 Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90 ��C Dry/75 ��C Wet Operation
- ASTM D4246-97 Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C Operation
- ASTM D4246-14 Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C Operation
- ASTM E2203-02 Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories
- ASTM E2203-02(2008) Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories
- ASTM E2203-14(2018) Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories
- ASTM E2203-14 Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories
- ASTM D7605-11(2022) Standard Test Method for Thermoplastic Elastomers—Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
- ASTM D6147-97(2002) Test Method for Vulcanized Rubber and Thermoplastic Elastomer—Determination of Force Decay (Stress Relaxation) in Compression
- ASTM D6048-07(2018) Standard Practice for Stress Relaxation Testing of Raw Rubber, Unvulcanized Rubber Compounds, and Thermoplastic Elastomers
- ASTM D6048-07(2023) Standard Practice for Stress Relaxation Testing of Raw Rubber, Unvulcanized Rubber Compounds, and Thermoplastic Elastomers
- ASTM D6147-97(2020) Standard Test Method for Vulcanized Rubber and Thermoplastic Elastomer—Determination of Force Decay (Stress Relaxation) in Compression
- ASTM D7605-11(2016) Standard Test Method for Thermoplastic Elastomers—Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
- ASTM D7605-10 Standard Test Method for Thermoplastic Elastomersx2014;Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
- ASTM D7605-11 Standard Test Method for Thermoplastic ElastomersMeasurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
- ASTM C1440-21 Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems
- ASTM C1440-99e1 Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems
British Standards Institution (BSI), thermoplastic elastomer
- BS ISO 18064:2003 Thermoplastic elastomers - Nomenclature and abbreviated terms
- 21/30425866 DC BS EN ISO 18064. Thermoplastic elastomers. Nomenclature and abbreviated terms
- BS EN ISO 18064:2022 Tracked Changes. Thermoplastic elastomers. Nomenclature and abbreviated terms
- BS EN 681-2:2000 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Thermoplastic elastomers
- BS ISO 23711:2022 Elastomeric seals. Requirements for materials for pipe joint seals used in water and drainage applications. Thermoplastic elastomers
- 21/30410891 DC BS ISO 23711. Elastomeric seals. Requirements for materials for pipe joint seals used in water and drainage applications. Thermoplastic elastomers
- 23/30456705 DC BS ISO 813-2. Rubber, vulcanized or thermoplastic. Determination of adhesion to a rigid substrate - Part 2. Adhesion of a soft thermoplastic elastomer layer
GM North America, thermoplastic elastomer
- GM GMP.E/P.012-2001 Thermoplastic Elastomer Polyolefinic, Shore A80, Interior
- GM GMP.E/P.066-1996 Thermoplastic Elastomer, - Polyolefinic, Interior, Shore A70
- GM GMP.E/P.083-2002 Thermoplastic Elastomer Polyolefinic, Shore A35, Interior
- GM GMP.E/P.065-2001 Thermoplastic Elastomer - Polyolefinic, Shore A47, HVAC Applications
- GM GMN8154-2003 Thermoplastic Elastomer Polyolefinic, Shore A65, Interior/Exterior
- GM GMP.E/P.029-2001 Thermoplastic Elastomer Polyolefinic, Shore A67, Interior/Exterior
- GM GMP.E/P.037-2001 Thermoplastic Elastomer Polyolefinic, Shore A87, Interior/Exterior
- GM GMP.E/P.057-2002 Thermoplastic Elastomer Polyolefinic, Shore A73, Interior/Exterior
- GM GMP.E/P.082-2002 Thermoplastic Elastomer Polyolefinic, Shore A62, Interior/Exterior
- GM GMP.E/P.132-2003 Thermoplastic Elastomer Polyolefinic, Shore A75, Interior/Exterior
- GM GMN7692-2001 Thermoplastic Elastomer Polyolefinic, Shore A55, Exterior, Extrusion Grade
- GM GMP.TES.011-1997 Thermoplastic Elastomer - Styrene Block Copolymer, 65 Shore A
- GM GMP.E/P.044-2002 Thermoplastic Elastomer Polyolefinic, Shore A73, Interior, Integrally Colored
- GM GMP.E/P.067-2002 Thermoplastic Elastomer Polyolefinic, Shore A87, Interior, Integrally Colored
- GM GMP.E/P.071-2002 Thermoplastic Elastomer Polyolefinic, Shore A55, Interior, Integrally Colored
- GM GMN3927-2002 Thermoplastic Elastomer - Polyolefinic, Shore A35, Underhood Applications
- GM GMP.E/P.002-2001 Thermoplastic Elastomer - Polyolefinic, Shore A64, Underhood Applications
- GM GMP.E/P.003-2001 Thermoplastic Elastomer - Polyolefinic, Shore A73, Underhood Applications
- GM GMP.E/P.004-2002 Thermoplastic Elastomer - Polyolefinic, Shore A80, Underhood Applications
- GM GMP.E/P.005-2001 Thermoplastic Elastomer - Polyolefinic, Shore A87, Underhood Applications
- GM GMP.E/P.006-2002 Thermoplastic Elastomer - Polyolefinic, Shore D40, Underhood Applications
- GM GMP.E/P.007-2002 Thermoplastic Elastomer - Polyolefinic, Shore D50, Underhood Applications
- GMP.TES.002-2005 Thermoplastic Elastomer ?Styrene Block Copolymer, Shore A60, Interior Revision C
- GM GMP.TES.002-2002 Thermoplastic Elastomer Styrene Block Copolymer, Shore A60, Interior
- GM GMP.E/P.016-2002 Thermoplastic Elastomer Polyolefinic, Shore D50, Interior/Exterior, Integrally Colored
- GM GMP.E/P.115-2003 Thermoplastic Elastomer Polyolefin Alloy, Shore A60, Interior, Integrally Colored
- GM GMP.E/P.116-2003 Thermoplastic Elastomer Polyolefin Alloy, Shore A65, Interior, Integrally Colored
- GM GMP.E/P.118-2003 Thermoplastic Elastomer Polyolefin Alloy, Shore A75, Interior, Integrally Colored
- GM GMP.E/P.120-2002 Thermoplastic Elastomer Polyolefinic, Shore A80, Interior/Exterior, Integrally Colored
- GM GMN3901-2001 Thermoplastic Elastomer Polyolefinic, Shore A65, Interior/Exterior, High Flow
- GM GMN6706-2001 Thermoplastic Elastomer Polyolefinic, Shore A75, Interior/Exterior, High Flow
- GM GMP.E/P.001-2003 Thermoplastic Elastomer Polyolefinic, Shore A55, Underhood and Interior Applications
- GM GMN7304-2002 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A70, Interior/Exterior
- GM GMP.TECEA.001-2001 Thermoplastic Elastomer - Chlorinated Ethylene Alloy, Interior/Exterior Applications, Shore A60
- GM GMP.TECEA.004-1996 Thermoplastic Elastomer - Chlorinated Ethylene Alloy, Interior/Exterior Applications, Shore A68
- GM GMP.TECEA.005-1997 Thermoplastic Elastomer - Chlorinated Ethylene Alloy, Interior/Exterior, Shore A77
- GM GMP.TES.013-2003 Thermoplastic Elastomer Styrene Block Copolymer, Shore A60, Interior/Exterior
- GM GMP.E/P.117-2003 Thermoplastic Elastomer Polyolefin Alloy, Shore A70, Interior, Integrally Colored
- GM GMP.EEBC.001-2004 Thermoplastic Elastomer - Polyester, Shore D36, 45 MPa Flexural Modulus
- GM GMP.E/P.126-2002 Thermoplastic Elastomer - Polyolefin Alloy, Shore A79, Interior/Exterior, EPDM Bondable
- GM GMP.E/P.138-2003 Thermoplastic Elastomer - Polyolefin Alloy, Shore A65, Interior/Exterior, EPDM Bondable
- GM GMP.E/P.136-2003 Thermoplastic Elastomer Polyolefin Alloy, Shore A75, Interior, Integrally Colored, Extrusion Grade
- GM GMP.TES.023-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A35, Interior, Integrally Colored
- GM GMP.E/P.078-2001 Thermoplastic Elastomer Polyolefinic, Shore A50, Interior/Exterior and Underhood Applications
- GM GMP.E/P.090-2001 Thermoplastic Elastomer - Polyolefinic, Shore A87, Barium Sulfate Filled Underhood Applications
- GM GMP.E/P.137-2003 Thermoplastic Elastomer - Polyolefinic, Shore A47, Interior/Exterior, and Underhood Applications
- GMP.E/P.136-2005 Thermoplastic Elastomer - Polyolefin Alloy, Shore A67, Interior, Integrally Colored, Extrusion Grade Revision B
- GM GMN8098-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore D38, Interior
- GM GMN6872-2001 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A90, Interior, Paintable
- GM GMP.TES.027-2004 Thermoplastic Elastomer - Styrenic Block Copolymer, Shore A70, Interior/Exterior, Integrally Colored
- GM GMP.TES.001-2002 Thermoplastic Elastomer Styrene Block Copolymer, Shore A47, Interior
- GM GMP.TEO+PA6.001-2001 Thermoplastic Elastomer - Polyolefinic + Nylon Blend, Shore A55, Underhood and Interior Applications
- GM GMN7303-2002 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A85, Interior/Exterior
- GM GMN7396-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A85, Interior/Exterior
- GM GMP.TES.026-2003 Thermoplastic Elastomer - Styrenic Block Copolymer, Shore A90, Interior/Exterior
- GMP.TES.030-2007 Thermoplastic Elastomer , Styrenic Block Copolymer, Shore D35, Interior, Paintable
- GM GMP.TEO+PA.001-1998 Thermoplastic Elastomer, Polyolefinic+Nylon Blend - for Underhood Applications, Shore A 55
- GM GMP.TES.015-2000 Thermoplastic Elastomer - Styrene Block Copolymer Interior, , Shore A 50, Paintable
- GM GMP.E/P.033-2012 Thermoplastic Elastomer - Polyolefinic, Shore D40 (Issue 1; Do Not Use on New Programs; No Replacement)
- GMP.TES.014-2005 Thermoplastic Elastomer - Styrene Block Copolymer, Shore D34, 240 MPa Flexural Modulus, Interior, Integrally Colored Revision B
- GM GMN6704-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A60, Interior, Integrally Colored
- GM GMP.TES.004-2002 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A73, Interior, UV Stabilized, Integrally Colored
- GM GMP.TES.006-2002 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A89, Barium Sulfate Filled, Underhood Applications
- GM GMN7305-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore D40, 160 MPa Flexural Modulus, Interior, Integrally Colored
- GM GMP.TES.012-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A89, 100 MPa Flexural Modulus, Interior, Integrally Colored
- GM GMP.TES.014-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A93, 240 MPa Flexural Modulus, Interior, Integrally Colored
- GM GMP.TES.025-2003 Thermoplastic Elastomer - Styrenic Block Copolymer, Shore A80, Interior/Exterior, Integrally Colored
- GM GMN6814-2002 Standard Test Methods for Vulcanized Rubber and TPE for Use in Finite Element Analysis Modeling
- GM GMP.TES.003-2002 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A73, Interior, Non-UV Stabilized
- GM GMP.TES.005-2002 Thermoplastic Elastomer Styrene Block Copolymer, Shore A59, Interior, Non-UV Stable
- GMP.E/P.065-2011 Thermoplastic Elastomer ?Polyolefinic, Shore A47, HVAC Applications Issue 4; Do Not Use on New Programs; Replaced by GMW15814
- GMP.E/P.029-2010 Thermoplastic Elastomer Polyolefinic, Shore A67, Interior/Exterior Issue 3; Do Not Use on New Programs; Replaced by GMW15812
- GMP.E/P.037-2010 Thermoplastic Elastomer Polyolefinic, Shore A87, Interior/Exterior Issue 4; Do Not Use on New Programs; Replaced by GMW15812
- GMP.E/P.057-2010 Thermoplastic Elastomer Polyolefinic, Shore A73, Interior/Exterior Issue 6; Do Not Use on New Programs; Replaced by GMW15812
- GMP.E/P.082-2010 Thermoplastic Elastomer Polyolefinic, Shore A62, Interior/Exterior Issue 3; Do Not Use on New Programs; Replaced by GMW15812
- GMN8154-2011 Thermoplastic Elastomer Polyolefinic, Shore A65, Interior/Exterior Issue 2; Do Not Use on New Programs; Replaced by GMW15814
- GMP.E/P.132-2011 Thermoplastic Elastomer Polyolefinic, Shore A75, Interior/Exterior Issue 2; Do Not Use on New Programs; Replaced by GMW15814
- GM GMN8098-2013 Thermoplastic Elastomer - Styrene Block Copolymer, Shore D38, Interior (Issue 2; Do Not Use on New Programs; No Replacement)
- GM GMP.TES.002-2013 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A60, Interior (Issue 5; Do Not Use on New Programs; No Replacement)
- GM GMP.TES.009-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A86, 105 MPa Flexural Modulus, Interior, Paintable
- GMP.E/P.115-2011 Thermoplastic Elastomer ?Polyolefin Alloy, Shore A60, Interior, Integrally Colored Issue 3; Do Not Use on New Programs; No Replacement
- GMP.E/P.116-2011 Thermoplastic Elastomer ?Polyolefin Alloy, Shore A65, Interior, Integrally Colored Issue 3; Do Not Use on New Programs; No Replacement
- GMP.E/P.117-2011 Thermoplastic Elastomer ?Polyolefin Alloy, Shore A70, Interior, Integrally Colored Issue 3; Do Not Use on New Programs; No Replacement
- GMP.E/P.118-2011 Thermoplastic Elastomer ?Polyolefin Alloy, Shore A75, Interior, Integrally Colored Issue 3; Do Not Use on New Programs; No Replacement
- GM GMP.TES.008-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A87, 100 MPa Flexural Modulus, Interior, Paintable
- GMP.E/P.160-2010 Thermoplastic Elastomer - Polyolefinic, Shore D40, Interior/Exterior Issue 2; Do Not Use on New Programs; Replaced by GMW15812
- GMP.E/P.006-2011 Thermoplastic Elastomer ?Polyolefinic, Shore D40, Underhood Applications Issue 4; Do Not Use on New Programs; Replaced by GMW15813
- GMP.E/P.007-2011 Thermoplastic Elastomer ?Polyolefinic, Shore D50, Underhood Applications Issue 5; Do Not Use on New Programs; Replaced by GMW15813
- GMP.E/P.002-2011 Thermoplastic Elastomer ?Polyolefinic, Shore A64, Underhood Applications Issue 4; Do Not Use on New Programs; Replaced by GMW15813
- GMP.E/P.003-2011 Thermoplastic Elastomer ?Polyolefinic, Shore A73, Underhood Applications Issue 4; Do Not Use on New Programs; Replaced by GMW15813
- GMP.E/P.004-2011 Thermoplastic Elastomer ?Polyolefinic, Shore A80, Underhood Applications Issue 4; Do Not Use on New Programs; Replaced by GMW15813
- GMP.E/P.005-2011 Thermoplastic Elastomer ?Polyolefinic, Shore A87, Underhood Applications Issue 4; Do Not Use on New Programs; Replaced by GMW15813
- GMP.E/P.120-2010 Thermoplastic Elastomer Polyolefinic, Shore A80, Interior/Exterior, Integrally Colored Issue 3; Do Not Use on New Programs; Replaced by GMW15812
- GM GMP.TES.030-2013 Thermoplastic Elastomer , Styrenic Block Copolymer, Shore D35, Interior, Paintable (Issue 2; Do Not Use on New Programs; No Replacement)
- GMN6706-2010 Thermoplastic Elastomer Polyolefinic, Shore A75, Interior/Exterior, High Flow Issue 2; Do Not Use on New Programs; Replaced by GMW15812
- GMN3901-2010 Thermoplastic Elastomer Polyolefinic, Shore A65, Interior/Exterior, High Flow Issue 3; Do Not Use on New Programs; Replaced by GMW15812
- GMP.E/P.144-2010 Thermoplastic Elastomer ?Polyolefinic, Shore A85, Interior/Exterior, High Flow Issue 2; Do Not Use on New Programs; Replaced by GMW15812
- GMP.E/P.147-2011 Thermoplastic Elastomer ?Polyolefin Alloy, Shore A90, Interior, Integrally Colored Issue 2; Do Not Use on New Programs; No Replacement
- GMN7692-2010 Thermoplastic Elastomer-Polyolefinic, Shore A55, Exterior, Extrusion Grade GMP.E/P.109 Issue 3; Do Not Use on New Programs; Replaced by GMW15812
- GMN3927-2011 Thermoplastic Elastomer ?Polyolefinic, Shore A35, Exterior/Underhood Applications Issue 4; Do Not Use on New Programs; Replaced by GMW15813
- GM GMP.TES.025-2013 Thermoplastic Elastomer - Styrenic Block Copolymer, Shore A80, Interior/Exterior, Integrally Colored (Issue 2; Do Not Use on New Programs; No Replacement)
- GM GMP.EEBC.020-2013 Thermoplastic Elastomer - Poly(ether ester) Block Copolymer, Shore D 45, 300 MPa Flexural Modulus (Issue 2; Do Not Use on New Programs; No Replacement)
- GMP.E/P.001-2011 Thermoplastic Elastomer ?Polyolefinic, Shore A55, Underhood and Interior Applications Issue 5; Do Not Use on New Programs; Replaced by GMW15813
- GM GMP.EEBC.016-2001 Thermoplastic Polyester Elastomer - 82 Type D Hardness
- GMP.E/P.138-2010 Thermoplastic Elastomer - Polyolefin Alloy, Shore A65, Interior/Exterior, EPDM Bondable Issue 2; Do Not Use on New Programs; Replaced by GMW15825
- GMP.E/P.078-2011 Thermoplastic Elastomer Polyolefinic, Shore A50, Interior/Exterior and Underhood Applications Issue 3; Do Not Use on New Programs; No Replacement
ES-UNE, thermoplastic elastomer
Professional Standard - Traffic, thermoplastic elastomer
- JT/T 1089-2016 Modified materials in pavement asphalt.Thermoplastic elastomers based on the waste rubber and plastic
Lithuanian Standards Office , thermoplastic elastomer
- LST EN ISO 18064:2015 Thermoplastic elastomers - Nomenclature and abbreviated terms (ISO 18064:2014)
- LST EN ISO 18064:2005 Thermoplastic elastomers - Nomenclature and abbreviated terms (ISO 18064:2003)
- LST EN 681-2+A1-2003 Elastomeric Seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers
- LST EN 681-2+A1-2003/A2-2005 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers
AENOR, thermoplastic elastomer
- UNE-EN ISO 18064:2015 Thermoplastic elastomers - Nomenclature and abbreviated terms (ISO 18064:2014)
- UNE-EN 681-2/A1:2002 Elastomeric seals- Material requrements for pipe joint seals used in water and drainage applications-Part 2: Thermoplastic elastomers.
- UNE-EN 681-2:2001/A2:2006 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers
- UNE-EN 681-2:2001 Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers.
Professional Standard - Chemical Industry, thermoplastic elastomer
- HG/T 5113-2016 Thermoplastic elastomer.TPS Compound for wire and cable uses
- HG/T 4903-2016 Dynamically full vulcanized thermoplastic elastomer (TPV).Ethylene-propylene-diene/polypropylene type
AT-ON, thermoplastic elastomer
Association of German Mechanical Engineers, thermoplastic elastomer
- VDI 2019-2016 Testing the adhesion of thermoplastic elastomers (TPE) on substrates
- VDI 2019 Blatt 1-2014 Testing the adhesion of thermoplastic elastomers (TPE) on substrates - Injection-moulded substrates
- VDI 2019 Blatt 1-2012 Testing the adhesion of thermoplastic elastomers (TPE) on substrates - Injection moulded substrates
Professional Standard - Petrochemical Industry, thermoplastic elastomer
- SH/T 1610-2011 Thermoplastic elastomers.Styrene-butadiene block copolymer
RU-GOST R, thermoplastic elastomer
- GOST R 54553-2019 Vulcanized rubber and thermoplastic elastomers. Determination of tensile stress-strain properties
- GOST R 54553-2011 Vulcanized rubber and thermoplastic elastomers. Determination of tensile stress-strain properties
- GOST R 57417-2017 Roofing and hydraulic-insulating flexible polymeric (thermoplastic or elastomer) materials. General specifications
国家能源局, thermoplastic elastomer
- SH/T 1812-2017 Thermoplastic elastomer styrene-isoprene block copolymer (SIS)
GM Global, thermoplastic elastomer
- GMW 15815-2013 Thermoplastic Elastomers - Polyolefinic Plus Nitrile Rubber Based Issue 2; English
- GMW 15813-2012 Thermoplastic Elastomers - Polyolefinic, Fully Crosslinked, General Purpose, Underhood Issue 2; English
- GMW 16088-2012 Thermoplastic Elastomers - Chlorinated Ethylene Alloy, Exterior Issue 2; English
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, thermoplastic elastomer
- GB/T 34692-2017 Thermoplastic elastomer—Determination of halogen—Oxygen bomb combustion-ion chromatography
- GB/T 34715-2017 Thermoplastic elastomer—Determination of phthalates—Gas chromatography-mass spectrometry
- GB/T 33422-2016 Thermoplastic elastomer—Determination of heavy metal contents— Inductively coupled plasma atomic emission spectrometric method
GM Holden Ltd, thermoplastic elastomer
工业和信息化部, thermoplastic elastomer
- QB/T 5370-2019 Thermoplastic elastomer door seals for household and similar refrigeration appliances
ZA-SANS, thermoplastic elastomer
- SANS 23711:2008 Elastomeric seals - Requirements for materials for pipe joint seals used in water and drainage applications - Thermoplastic elastomers
Professional Standard - Automobile, thermoplastic elastomer
- QC/T 797-2008 Material identification & marking of automotive plastic, rubber & thermoplastic elastomer parts
Korean Agency for Technology and Standards (KATS), thermoplastic elastomer
- KS M ISO 23711-2007(2017) Elastomeric seals－Requirements for materials for pipe joint seals used in water and drainage applications－Thermoplastic elastomers
- KS M ISO 23711-2007(2022) Elastomeric seals－Requirements for materials for pipe joint seals used in water and drainage applications－Thermoplastic elastomers
Association Francaise de Normalisation, thermoplastic elastomer
- NF EN 681-2/A1:2003 Garnitures d'étanchéité en caoutchouc - Spécification des matériaux pour garnitures d'étanchéité utilisées dans le domaine de l'eau et du drainage - Partie 2 : élastomères thermoplastiques
- NF EN 681-2/A2:2005 Garnitures d'étanchéité en caoutchouc - Spécification des matériaux pour garnitures d'étanchéité pour joints de canalisations utilisées dans le domaine de l'eau et de l'évacuation - Partie 2 : élastomères thermoplastiques
- NF EN 681-2:2000 Garnitures d'étanchéité en caoutchouc - Spécification des matériaux pour garnitures d'étanchéité pour joints de canalisations utilisées dans le domaine de l'eau et de l'évacuation - Partie 2 : élastomères thermoplastiques
- NF EN ISO 20029-1:2018 Plastiques - Élastomères thermoplastiques à base de polyester/ester et polyéther/ester pour moulage et extrusion - Partie 1 : système de désignation et base de spécifications
- NF EN ISO 20029-2:2018 Plastiques - Élastomères thermoplastiques à base de polyester/ester et polyéther/ester pour moulage et extrusion - Partie 2 : préparation des éprouvettes et détermination des propriétés
GOSTR, thermoplastic elastomer
- GOST R ISO 1431-1-2019 Rubber and thermoplastic elastomers. Resistance to ozone cracking. Part 1. Static and dynamic tensile strain testing
未注明发布机构, thermoplastic elastomer
- DIN EN 681-2:2003 Elastomeric seals — Material requirements for pipe joint seals used in water and drainage applications — Part 2: Thermoplastic elastomers