ZH
RU
ES

Drop weight test time

Drop weight test time, Total:499 items.

In the international standard classification, Drop weight test time involves: Paints and varnishes, Testing of metals, Mechanical testing, Reinforced plastics, Equipment for petroleum and natural gas industries, Standardization. General rules, Plastics, Petroleum, petroleum products and natural gas handling equipment, Waxes, bituminous materials and other petroleum products, Equipment for the chemical industry, Rubber and plastics products, Road engineering, Protection against dangerous goods, Protection of and in buildings, Cereals, pulses and derived products, Horology, Printed circuits and boards, Road vehicles in general, Pipeline components and pipelines, Sensory analysis, Measurement of volume, mass, density, viscosity, Pulps, Rubber, Products of the textile industry, Environmental testing, Protection against fire, Construction materials, Raw materials for rubber and plastics, Semiconductor devices, Refractories, Products of the chemical industry, Electronic component assemblies, Paper and board, Vibrations, shock and vibration measurements, Continuous handling equipment, Components for electrical equipment, Electrical and electronic testing, Packaging materials and accessories, Insulating materials, Sports equipment and facilities, Paper products, Thermodynamics and temperature measurements, Fibre optic communications, Space systems and operations, Ceramics, Earth-moving machinery, Electricity. Magnetism. Electrical and magnetic measurements, Electrical accessories, Nuclear energy engineering, Fuels, Adhesives, Test conditions and procedures in general, Organic chemicals, Applications of information technology, Electromechanical components for electronic and telecommunications equipment, Radiocommunications, Hydraulic fluids, Packaging and distribution of goods in general, Materials for aerospace construction, Electronic tubes, Measurement of fluid flow, Installations in buildings, Paint ingredients, Galvanic cells and batteries, Solar energy engineering, Components and accessories for telecommunications equipment.

International Organization for Standardization (ISO), Drop weight test time

ISO 6272:1993 Paints and varnishes; falling-weight test
ISO/TR 6272:1979 Paints and varnishes — Falling weight test
ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter
ISO 6272-2:2002 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter
ISO 6272-1:2002 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter
ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter
ISO 1826:1974 Title missing - Legacy paper document
ISO 1826:1981 Rubber, vulcanized; Time-interval between vulcanization and testing; Specification
ISO 148-3:2008 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
ISO 148-3:2016 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
ISO 9705-1:2016 Reaction to fire tests - Room corner test for wall and ceiling lining products - Part 1: Test method for a small room configuration
ISO 22183:2023 Plastics — Validation of force-time curves obtained from high-speed tensile tests
ISO 5879:2023 Space systems — Ground test for the separation between a launch vehicle and a spacecraft — Requirements for combined separation tests, horizontal separation tests and individual falling separation tests
ISO 5004:1981 Earth-moving machinery - Method of test for the measurement of tool movement time
ISO 471:1977 Title missing - Legacy paper document
ISO 17514:2004 Time-measuring instruments - Photoluminescent deposits - Test methods and requirements
ISO 471:1995 Rubber - Temperatures, humidities and times for conditioning and testing
ISO 9597:1989 Cements; test methods; determination of setting time and soundness
ISO 5004:1987 Earth-moving machinery — Test method for measurement of tool movement time
ISO/FDIS 5879 Space systems — Launch vehicle/spacecraft separation ground test requirements for combined separation test, horizontal separation test and individual falling separation test
ISO 471:1983 Rubber; Standard temperatures, humidities and times for the conditioning and testing of test pieces
ISO/TR 12351:1999 Road vehicles - Determination of head contact and duration in impact tests

Association Francaise de Normalisation, Drop weight test time

NF T30-017:1994 Paints and varnishes. Falling-weight test.
NF P98-897-2:2003 Cold applied joint sealants - Part 2 : test method for the determination of tack free time.
NF T30-017-1*NF EN ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1 : falling-weight test, large-area indenter
NF T30-017-2*NF EN ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2 : falling-weight test, small area indenter
NF T40-103:1988 Vulcanized rubber. Interval of time between vulcanization and tests.
NF T70-501:1995 Energetic materials for defense. Safety, vulnerability. Determination of impact sensitivity. Test with 30 kg fallhammer.
NF A03-011-3:2009 Metallic materials - Charpy pendulum impact test - Part 3 : preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines.
NF C20-757:2001 Environmental testing - Part 2-57 : tests - Test Ff : vibration - Time-history method.
NF E18-100:2013 Time-temperature indicators and integrators - Tests and performance
NF S86-304*NF ISO 17514:2005 Time-measuring instruments - Photoluminescent deposits - Test methods and requirements
NF E58-075:1987 Earth-moving machinery. Test method for measurement of tool movement time.
NF T30-087:1992 Paints and varnishes. Determination of through-dry state and through-dry time. Method of test.
NF T51-000:1978 Plastics. Preferred scales of temperatures and test durations.
NF C20-757:1994 Environmental testing. Part 2 : test methods. Test Ff : vibration, time-history method.
NF L58-100-304*NF EN 2349-304:2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 304 : operate and release time
NF P15-471-3/IN1:2009 Methods of testing cement - Part 3 : determination of setting times and soundness.
NF C45-253-1*NF EN 61812-1:2013 Time relays for industrial and residential use - Part 1 : requirements and tests
NF P15-473:1995 Methods of testing cement. Part 3 : determination of setting time and soundness.
NF L17-036*NF EN 3094:2017 Aerospace series - Sealants - Test method - determination of the application time
NF EN 3094:2017 Série aérospatiale - Produits d'étanchéité - Méthode d'essai - Détermination du temps d'application
NF C96-017-1*NF EN 62374-1:2011 Semiconductor devices - Part 1 : time-dependent dielectric breakdown (TDDB) test for inter-metal layers.
NF T76-411*NF EN 13409:2003 Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of setting time.

CZ-CSN, Drop weight test time

CSN 42 0346-1979 Metal testing. Determination of transition temperature of structural steels using the bending-impact test of large pieces of original thickness
CSN 34 6318-1987 Testing of ceramic elektrotechnic materials.Test of long time loading in the flexure

Professional Standard - Light Industry, Drop weight test time

QB/T 2918-2007 Case and bag.Test method for impact resistance by means of falling weight
QB/T 2791-2006 Test Method for Thickness Loss of Carpets After Prolonged, Heavy Static Loading
QB/T 1092-2001 Test method for thickness loss of carpets after a short period of moderate static loading
QB/T 1092-1991 Test method for thickness loss of carpets after a short period of moderate static loading

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Drop weight test time

GB/T 8363-2018 Steel—Drop-weight tear tests method

IN-BIS, Drop weight test time

Danish Standards Foundation, Drop weight test time

DS/EN 10274:2000 Metallic materials - Drop weight tear test
DS/EN ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter
DS/EN ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter
DS/ISO 1826:1989 Rubber. Time-interval between vulcanization and testing
DS/ISO 471:1985 Rubber. Standard temperatures, humidities and times for the conditioning and testing of test pieces
DS/EN 196-3+A1:2009 Methods of testing cement - Part 3: Determination of setting times and soundness
DS/EN ISO 148-3:2009 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines

Lithuanian Standards Office , Drop weight test time

LST EN 10274-2000 Metallic materials - Drop weight tear test
LST EN ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011)
LST EN ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011)
LST EN 196-3-2005+A1-2009 Methods of testing cement - Part 3: Determination of setting times and soundness

AENOR, Drop weight test time

UNE-EN 10274:1999 METALLIC MATERIALS. DROP WEIGHT TEAR TEST
UNE-EN ISO 6272-2:2012 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011)
UNE-EN ISO 6272-1:2012 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011)
UNE 83311:1986 TESTS OF CONCRETE. DETERMINATION OF SETTING TIME
UNE 53945:2008 Cellular plastics. Test method of the recovery time of flexible foams of polyurethane (PUR)
UNE 80114:2014 Test methods of cements. Physical analysis. Determination of irregular setting time.
UNE-EN 196-3:2017 Methods of testing cement - Part 3: Determination of setting times and soundness

German Institute for Standardization, Drop weight test time

DIN EN 10274:1999-07 Metallic materials - Drop weight tear test; German version EN 10274:1999
DIN 53769-3:1988 Testing of glass fibre reinforced plastics pipes; determination of initial and long-term ring stiffness
DIN 10970:2002 Sensory analysis - Time intensity test
DIN EN 60068-2-57:2000 Environmental testing - Part 2: Tests; test Ff: Vibration, time-history method (IEC 60068-2-57:1999); German version EN 60068-2-57:2000
DIN EN 60749-37:2008 Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer (IEC 60749-37:2008); German version EN 60749-37:2008
DIN EN ISO 148-3:2017-04 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2016); German version EN ISO 148-3:2016
DIN 53131-2:2005 Testing of paper - Inkjet mediums - Part 2: Drytime
DIN 53131-2:2010 Testing of paper - Inkjet mediums - Part 2: Drytime
DIN EN ISO 148-3:2017 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2016); German version EN ISO 148-3:2016
DIN 19242-1:1987 Measurement and control; performance tests on process computer systems; time measurement; test procedures
DIN EN ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011); German version EN ISO 6272-1:2011
DIN EN ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011); German version EN ISO 6272-2:2011
DIN EN 61300-3-21:1998 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements; Switching time and bounce time (IEC 61300-3-21:1998); German version EN 61300-3-21:1998
DIN 53758:1975 Testing of plastics articles; determination of the effect of internal pressure on hollow objects by short-time test
DIN 53759:1975 Testing of plastics articles; determination of the effect of internal pressure on hollow objects by long-time test
DIN EN 3094:2018 Aerospace series - Sealants - Test method - determination of the application time; German and English version EN 3094:2017
DIN EN 14187-2:2003 Cold applied joint sealants - Part 2: Test method for the determination of tack free time; German version EN 14187-2:2003
DIN EN ISO 148-3:2009 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2008); English version of DIN EN ISO 148-3:2009-06
DIN EN 60512-25-3:2002 Connectors for electronic equipment - Tests and measurements - Part 25-3: Test 25c: Rise time degradation (IEC 60512-25-3:2001); German version EN 60512-25-3:2001
DIN EN 196-3:2017-03 Methods of testing cement - Part 3: Determination of setting times and soundness; German version EN 196-3:2016

Professional Standard - Machinery, Drop weight test time

JB/T 12275-2015 Drop-weight impact testing machines used for metallic materials
JB/T 9389-2008 Specification for falling weight impact testing machines used for non-metallic materials

RU-GOST R, Drop weight test time

GOST 33496-2015 Polymer composites. Method for testing the resistance to damage during a falling weight impact
GOST 27251-1987 Earth-moving machinery. Method of test for the measurement of tool mavement time
GOST R 56337-2015 Automobile roads of general use. Geosynthetics. Test procedure for determination of durability at the dynamic forcing through (cone drop test)
GOST 17639-1972 Kinescopes for black-and-white television receivers. Test method for guaranted operating time
GOST IEC 61812-1-2013 Specified time relays for industrial use. Part 1. Requirements and tests

Professional Standard - Petroleum, Drop weight test time

SY/T 6476-2013 Practice for drop-weight tear tests on steel line pipe
SY/T 6476-2000 Drop-weight tear tests of steel pipe
SY/T 6476-2007 Practice for drop-weight tear tests on steel line pipe
SY 0040-2013 Test method for impact resistance of pipeline anti-corrosion coating (drop weight test method)
SY/T 0040-2013 Test method for impact resistance of pipeline coatings.(Falling weight test)
SY/T 0040-1997 Test method for impact resistance of pipeline caotings(Falling weight test)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Drop weight test time

GB/T 8363-1987 Metallic materials--Drop-weight tear tests of ferritic steels
GB/T 8363-2007 Test method for drop-weight tear tests of steel products
GB/T 14153-1993 General test method for impact resistance of rigid plastics by means of falling weight
GB/T 6803-1986 Standard method for conducting drop weight test to determine nil ductility transition temperature of ferritic steels
GB 11548-1989 Test method for impact resistance of rigid plastic sheets (dropping weight method)
GB/T 11548-1989 Standard test method for impact resistance of rigid plastic sheeting by means of a tup(falling weight)
GB/T 6803-2008 Test method for drop-weight test to determine nil-ductility transition temperature of ferritic steels
GB/T 14613-1993 Wheat-meal fermentation time test
GB/T 20624.1-2006 Paints and varnishes. Rapid-deformation(impact resistance) tests. Part 1: Falling-weight test, large-area indenter
GB/T 20624.2-2006 Paints and varnishes. Rapid-deformation(impact resistance) tests. Part 2: Falling-weight test, small-area indenter
GB/T 14613-2008 Inspection of grain and oils.Wheat-meal fermentation time test(Pelshenke test)
GB/T 21579-2008 Dangerous goods.Test method of time/pressure
GB/T 18658-2018 Charpy V-notch reference test pieces for indirect verification of pendulum impact testing machines
GB/T 30691-2014 Conveyor belts.Test atmospheres and conditioning periods
GB/T 1684-1985 Vulcanized rubber--Testing short time static compression
GB/T 2423.64-2023 Environmental testing Part 2: Test method Test Fj: Reproduction of long-term vibration history
GB/T 22459.3-2008 Refractory mortars.Part 3:Determination of joint stability
GB/T 18908.1-2002 Specified time relays for industrial use--Part 1: Requirements and tests
GB/T 2423.48-1997 Environmental testing for electric and electronic products. Part 2: Test methods. Test Ff: Vibration--Time-history method
GB/T 2423.48-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Test Ff:Vibration.Time-history method
GB/T 7702.10-1997 Standard test method for granular activated carbon from coal--Determination of service life
GB/T 2941-1991 Rubber-Standard temperatures,humidities and times for the conditioning environmental and testing of test pieces
GB/T 32788.1-2016 Test method for properties of prepreg.Part 1:Determination of gel time
GB/T 14767-1993 Textile floor coverings determination of thickness loss after prolonged、heavy static loading
GB/T 7702.11-1997 Standard test method for granular activated carbon from coal--Determination of service life against henzene vapor
GB/T 13477.5-2002 Test method for building sealants Part 5: Determination for tack-free time

National Metrological Technical Specifications of the People's Republic of China, Drop weight test time

JJF 1445-2014 Calibration Specification for Falling Weight Impact Testing Machines
JJF(石化)028-2019 Calibration Specification for Coating Drying Time Testers
JJF(石化) 028-2019 Calibration specification for paint film drying time tester

API - American Petroleum Institute, Drop weight test time

API RP 5L3-2014 Drop-Weight Tear Tests on Line Pipe (FOURTH EDITION)
API RP 5L3 RUSSIAN-2014 Recommended Practice for Conducting Drop-Weight Tear Tests on Line Pipe (ЧЕТВЕРТАЯ РЕДАКЦИЯ)
API RP 5L3-1996 Recommended Practice for Conducting Drop-Weight Tear Tests on Line Pipe (Third Edition)
API RP 5L3 RUSSIAN-1996 Recommended Practice for Conducting Drop-Weight Tear Tests on Line Pipe (Third Edition)
API RP 5L3-1969 Recommended Practice for Conducting Drop-Weight Tear Tests on Line Pipe (First Edition)
API RP 5L3 KAZAKH-1996 RECOMMENDED PRACTICE FOR CONDUCTING DROP-WEIGHT TEAR TESTS ON LINE PIPE (Third Edition)
API RP 5L3-1978 RECOMMENDED PRACTICE FOR CONDUCTING DROP-WEIGHT TEAR TESTS ON LINE PIPE SECOND EDITION

American Petroleum Institute (API), Drop weight test time

API RP 5L3-2014(2021) Drop-Weight Tear Tests on Line Pipe (FOURTH EDITION)

Standard Association of Australia （SAA）, Drop weight test time

AS 1330:2019 Metallic materials — Drop weight tear test for steels
AS 1580.406.1:2004 Paints and related materials - Methods of test - Resistance to impact - Falling weight test (Gardner-type tester)
AS/NZS 4347.6:1995 Damp-proof courses and flashings - Methods of test - Determining impact resistance (falling dart impact test)
AS 1683.20:2001 Methods of test for rubber - Standard temperatures, humidities and times for conditioing and testing

国家能源局, Drop weight test time

SY/T 6476-2017 Drop weight tear test method for pipeline steel pipes

Taiwan Provincial Standard of the People's Republic of China, Drop weight test time

CNS 13784-1996 General Rules for Testing Impact Strength of Rigid Plastic by the Falling Weigth Method
CNS 14220-1998 Method of test for setting time of concrete
CNS 11373-1985 Method of Test for Drainage Time of Pulp
CNS 11424-1985 Method of Test for Setting Time of Refractory Mortar
CNS 11239-1985 Endurance (Electrical) Testing Method for Electronic Component
CNS 4339-1978 Method of Test for Determining Water Emersion Endurance of Glue Seams of Paper Sacks
CNS 13586-1995 Method of Test for Time of Setting of Alumina Cement Mortar(by Vicat Needle)

British Standards Institution (BSI), Drop weight test time

BS 3900-E3:1973 Methods of test for paints - Impact (falling weight) resistance
BS EN ISO 6272-1:2004 Paints and varnishes - Rapid-deformation (impact resistance) tests - Falling-weight test, large-area indenter
BS EN 60068-2-57:2000 Environmental testing - Test methods - Test Ff - Vibration - Time-history method
BS EN 60749-37:2008 Semiconductor devices — Mechanical and climatic test methods — Part 37: Board level drop test method using an accelerometer
BS EN 60749-40:2011 Semiconductor devices. Mechanical and climatic test methods. Board level drop test method using a strain gauge
BS 3900-C1:1965 Methods of test for paints - Tests associated with paint film formation - Wet edge time
BS EN ISO 6272-2:2011 Paints and varnishes. Rapid-deformation (impact resistance) tests. Falling-weight test, small-area indenter
BS EN ISO 6272-1:2011 Paints and varnishes. Rapid-deformation (impact resistance) tests. Falling-weight test, large-area indenter
BS EN ISO 148-3:2016 Tracked Changes. Metallic materials. Charpy pendulum impact test. Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
BS ISO 22183:2023 Plastics. Validation of force-time curves obtained from high-speed tensile tests
BS 4550 Pt.3 Sec.3.6:1978 Methods of testing cement. Physical tests. Test for setting times
BS EN 14187-2:2003 Cold applied joint sealants - Test method for the determination of tack free time
BS EN 61300-3-21:1998 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Examinations and measurements - Switching time and bounce time
22/30427884 DC BS ISO 22183. Plastics. Validation of force-time curve of tensile testing at high speed
BS EN 62374-1:2010 Semiconductor devices. Time-dependent dielectric breakdown (TDDB) test for inter-metal layers
BS ISO 17514:2005 Time-measuring instruments - Photoluminescent deposits - Test methods and requirements
BS 3900-J3:1998 Methods of test for paints - Testing of coating powders - Determination of gel time of coating powders
BS 5350-B5:1976 Methods of test for adhesives - Determination of gelation time
BS 5350-H4:1984 Methods of test for adhesives - Physical tests on hot-melt adhesives - Determination of maximum open time of hot-melt adhesives (oven method)
BS 7908:1999 Packaging - Temperature and time-temperature indicators - Performance specification and reference testing
BS EN 3094:2017 Aerospace series. Sealants. Test method. determination of the application time
BS ISO 23945-1:2022 Test methods for sprayed concrete - Flash setting accelerating admixtures. Setting time
BS EN ISO 9073-13:2007 Textiles - Test methods for nonwovens - Repeated liquid strike-through time
22/30431878 DC BS ISO 5879. Space systems. Launch vehicle/spacecraft separation ground test requirements for combined separation test, horizontal separation test and individual falling separation test
BS ISO 5879:2023 Space systems. Ground test for the separation between a launch vehicle and a spacecraft. Requirements for combined separation tests, horizontal separation tests and individual falling separation tests
BS DD ENV 302-5:2002 Adhesives for load-bearing timber structures - Test tethods - Determination of the conventional assembly time
BS EN 302-6:2004 Adhesives for load-bearing timber structures - Test methods - Determination of the conventional pressing time

American Society for Testing and Materials (ASTM), Drop weight test time

ASTM E436-91(1997) Standard Test Method for Drop-Weight Tear Tests of Ferritic Steels
ASTM E436-03(2021) Standard Test Method for Drop-Weight Tear Tests of Ferritic Steels
ASTM G14-04 Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
ASTM G14-88(1996)e1 Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
ASTM G14-04(2018) Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
ASTM E436-03 Standard Test Method for Drop-Weight Tear Tests of Ferritic Steels
ASTM G14-04(2010) Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
ASTM G14-04(2010)e1 Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
ASTM E208-06(2012) Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
ASTM E680-79(1999) Standard Test Method for Drop Weight Impact Sensitivity Of Solid-Phase Hazardous Materials
ASTM E680-79(2018) Standard Test Method for Drop Weight Impact Sensitivity of Solid-Phase Hazardous Materials
ASTM E680-79(2011)e1 Standard Test Method for Drop Weight Impact Sensitivity of Solid-Phase Hazardous Materials
ASTM D5628-10 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
ASTM D4495-00 Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
ASTM D4495-00(2005) Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
ASTM E208-06 Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
ASTM E2583-07(2015) Standard Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD)
ASTM D4272-08 Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop
ASTM D4272-08a Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop
ASTM D4272-14 Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop
ASTM D4272/D4272M-15 Standard Test Method for Total Energy Impact of Plastic Films by Dart Drop
ASTM E208-20e1 Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
ASTM D4495-12 Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
ASTM D5628-07 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
ASTM D5628-06 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
ASTM D1424-96 Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus
ASTM D1424-96(2004) Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus
ASTM D1424-09 Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus
ASTM D1424-09(2013) Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus
ASTM D5628-96(2001)e1 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
ASTM C995-94 Standard Test Method for Time of Flow of Fiber-Reinforced Concrete Through Inverted Slump Cone
ASTM C995-01 Standard Test Method for Time of Flow of Fiber-Reinforced Concrete Through Inverted Slump Cone
ASTM D2444-99(2005) Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
ASTM F736-17(2023) Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
ASTM D2463-15 Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers
ASTM D1424-07a Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus
ASTM F736-95(2001) Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
ASTM F736-95(2006) Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
ASTM E292-18 Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials
ASTM C308-00 Standard Test Methods for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars
ASTM C308-00(2005) Standard Test Methods for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars
ASTM D2444-99(2010) Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
ASTM D4495-21 Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
ASTM D1424-09(2013)e1 Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus
ASTM D711-89(2004) Standard Test Method for No-Pick-Up Time of Traffic Paint
ASTM F736-95(2011) Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
ASTM D5420-98a Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
ASTM D5455-93(1998) Standard Test Method for Short-Term Liquid Sorption Into Paper (Bristow Test)
ASTM D5455-93(2003) Standard Test Method for Short-Term Liquid Sorption Into Paper (Bristow Test)
ASTM D7488-11 Standard Test Method for Open Time of Latex Paints
ASTM D7488-11(2016) Standard Test Method for Open Time of Latex Paints
ASTM D5734-95(2001) Standard Test Method for Tearing Strength of Nonwoven Fabrics by Falling-Pendulum (Elmendorf) Apparatus
ASTM D5420-04 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
ASTM D5420-10 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
ASTM E292-01 Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials
ASTM E292-83(1996)e1 Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials
ASTM E292-09e1 Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials
ASTM D711-10 Standard Test Method for No-Pick-Up Time of Traffic Paint
ASTM D711-10(2015) Standard Test Method for No-Pick-Up Time of Traffic Paint
ASTM D7488-10 Standard Test Method for Open Time of Latex Paints
ASTM D7136/D7136M-12 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
ASTM C679-03 Standard Test Method for Tack-Free Time of Elastomeric Sealants
ASTM D3056-00 Standard Test Method for Gel Time of Solventless Varnishes
ASTM D3056-05 Standard Test Method for Gel Time of Solventless Varnishes
ASTM C679-03(2009)e1 Standard Test Method for Tack-Free Time of Elastomeric Sealants
ASTM D1297-56 Method of Test for No-Dirt-Retention Time of Traffic Paint
ASTM D711-20 Standard Test Method for No-Pick-Up Time of Traffic Paint
ASTM C679-15 Standard Test Method for Tack-Free Time of Elastomeric Sealants
ASTM D3056-14 Standard Test Method for Gel Time of Solventless Varnishes
ASTM D3056-23 Standard Test Method for Gel Time of Solventless Varnishes
ASTM C414-03 Standard Test Method for Working, Setting, and Service Strength Setting Times of Chemically Setting Chemical-Resistant Silicate and Silica Mortars
ASTM C414-03(2008) Standard Test Method for Working, Setting, and Service Strength Setting Times of Chemically Setting Chemical-Resistant Silicate and Silica Mortars
ASTM C414-03(2012) Standard Test Method for Working, Setting, and Service Strength Setting Times of Chemically Setting Chemical-Resistant Silicate and Silica Mortars
ASTM D7136/D7136M-15 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
ASTM E1860-97a Standard Test Method for Elapsed Time Calibration Thermal Analyzers
ASTM E1860-07 Standard Test Method for Elapsed Time Calibration Thermal Analyzers
ASTM C679-87(1997)e1 Standard Test Method for Tack-Free Time of Elastomeric Sealants
ASTM C67-02b Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
ASTM C67-02a Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
ASTM C67-01 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
ASTM C67-02c Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
ASTM C67-08 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
ASTM E1860-02 Standard Test Method for Elapsed Time Calibration Thermal Analyzers
ASTM E1860-13(2018) Standard Test Method for Elapsed Time Calibration of Thermal Analyzers
ASTM E1860-13 Standard Test Method for Elapsed Time Calibration of Thermal Analyzers
ASTM C679-15(2022) Standard Test Method for Tack-Free Time of Elastomeric Sealants
ASTM E1860-23 Standard Test Method for Elapsed Time Calibration of Thermal Analyzers
ASTM C953-87(1997) Standard Test Method for Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory
ASTM C953-17 Standard Test Method for Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory
ASTM D4217-07 Standard Test Method for Gel Time of Thermosetting Coating Powder
ASTM D1363-06(2019) Standard Test Method for Permanganate Time of Acetone and Methanol
ASTM D6325-98(2011) Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives
ASTM D4217-07(2013) Standard Test Method for Gel Time of Thermosetting Coating Powder
ASTM D8161-17(2022) Standard Test Method for Impact Resistance of Thermoplastic Pavement Marking Materials over a Highway Substrate by Means of a Striker Impacted by a Falling Weight
ASTM D3532-99(2004) Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg
ASTM D1721-97 Standard Test Method for Permanganate Time of Tricresyl Phosphate
ASTM D1545-98 Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method
ASTM D1598-02(2009) Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
ASTM D3532-99 Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg
ASTM D3532/D3532M-19 Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg
ASTM F1661-09(2015) Standard Test Method for Determining the Contact Bounce Time of a Membrane Switch
ASTM D1598-21 Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
ASTM D1598-15 Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
ASTM D1598-15a Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
ASTM E1457-07e4 Standard Test Method for Measurement of Creep Crack Growth Times in Metals
ASTM E1457-15 Standard Test Method for Measurement of Creep Crack Growth Times in Metals
ASTM D1598-23 Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
ASTM D3520-04 Standard Test Method for Quenching Time of Heat-Treating Fluids (Magnetic Quenchometer Method)
ASTM E3048-22a Standard Test Method for Determination of Time to Burn-Through Using the Intermediate Scale Calorimeter (ICAL) Radiant Panel
ASTM E2046-99 Standard Test Method for Reaction Induction Time by Thermal Analysis
ASTM D2377-00 Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants
ASTM D1598-97 Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
ASTM D2377-00(2006) Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants
ASTM E2046-03 Standard Test Method for Reaction Induction Time by Thermal Analysis
ASTM D1598-02(2008) Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
ASTM D2377-00(2008) Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants
ASTM D1545-76(1989)e1 Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method
ASTM E22-41 Recommended Practice for Conducting Long-Time High-Temperature Tension Test of Metallic Materials
ASTM E2046-19 Standard Test Method for Reaction Induction Time by Thermal Analysis
ASTM E2046-14 Standard Test Method for Reaction Induction Time by Thermal Analysis
ASTM D6325-98(2019) Standard Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives
ASTM D1545-13(2017) Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method
ASTM D2377-14 Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants
ASTM F2018-00(2010) Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
ASTM C191-19 Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle
ASTM D3895-98 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
ASTM D1545-07 Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method
ASTM D4497-94(2004)e1 Standard Test Method for Determining the Open Time of Hot Melt Adhesives (Manual Method)
ASTM D5613-94(2003) Standard Test Method for Open-Channel Measurement of Time of Travel Using Dye Tracers
ASTM D5613-94(2008) Standard Test Method for Open-Channel Measurement of Time of Travel Using Dye Tracers
ASTM C191-18a Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle
ASTM D1545-07(2012) Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method
ASTM C191-18 Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle
ASTM D4497-10 Standard Test Method for Determining the Open Time of Hot Melt Adhesives (Manual Method)
ASTM D1545-13(2023) Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method
ASTM D1545-13 Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method
ASTM D4497-10(2018) Standard test method for determination of break time of hot melt adhesives (manual method)
ASTM C191-01 Standard Test Method for Time of Setting of Hydraulic Cement by Vicat Needle
ASTM C191-03 Standard Test Method for Time of Setting of Hydraulic Cement by Vicat Needle
ASTM D5613-94(1998) Standard Test Method for Open-Channel Measurement of Time of Travel Using Dye Tracers

Professional Standard - Railway, Drop weight test time

TB/T 1961-1987 Vehicle buffer performance and drop weight test method
TB/T 2769.7-1997 Heavy-duty rail car test method air compressor blowing time and exhaust air volume test

Korean Agency for Technology and Standards (KATS), Drop weight test time

KS F 2379-2017(2022) Testing method for deflections with a falling-weight-type impulse load device
KS D 0285-2005 Standard test method for conducting drop-weight test to determine nill-ductility transition temperature of ferritic steels
KS D 0285-2015(2020) Standard test method for conducting drop-weight test to determine nill-ductility transition temperature of ferritic steels
KS B 6172-1980(2016) Methods of Test for Time Recorders
KS M ISO 6272-2-2013(2018) Paints and varnishes — Rapid deformation(impact resistance)tests–Part 2: Falling-weight test, small-area indenter
KS M ISO 6272-1-2013(2018) Paints and varnishes — Rapid-deformation (impact resistance) tests –Part 1: Falling-weight test, large-area indenter
KS B 6172-1980(2021) Methods of Test for Time Recorders
KS M ISO 6272-1:2010 Paints and varnishes-Rapid-deformation(impact resistance) tests-Part 1:Falling-weight test, large-area indenter
KS M ISO 6272-2:2008 Paints and varnishes-Rapid-deformation(impact resistance) tests-Part 2:Falling-weight test, small-area indenter
KS M ISO 6272-2:2013 Paints and varnishes — Rapid deformation(impact resistance)tests–Part 2: Falling-weight test, small-area indenter
KS M ISO 6272-1:2013 Paints and varnishes — Rapid-deformation (impact resistance) tests –Part 1: Falling-weight test, large-area indenter
KS D 0285-2015 Standard test method for conducting drop-weight test to determine nill-ductility transition temperature of ferritic steels
KS L 5103-1996 Testing method for setting time of hydraulic cement by Gilmour needles
KS L 3125-2008 Testing method for setting time of refractory mortars
KS L 3125-1974 Testing method for setting time of refractory mortars
KS L 5108-2007 Testing method for setting time of hydraulic cement by vicat needle
KS C IEC 60068-2-57:2003 Environmental testing－Part 2－57：Tests－Test Ff：Vibration －Time-history method
KS C IEC 60068-2-85:2022 Environmental testing — Part 2-85: Tests — Test Fj: Vibration — Long time history replication
KS F ISO 9705-1:2022 Reaction to fire tests — Room corner test for wall and ceiling lining products — Part 1: Test method for a small room configuration
KS M ISO 471-2002(2007) Rubber－Temperature, humidities and times for conditioning and testing
KS F 8114-2013 Earth - moving machinery- Test methods for measurement of tool movement time
KS F 8114-1994(2009) Earth - moving machinery- Test methods for measurement of tool movement time
KS L 5103-2021 Test method for setting time of hydraulic cement by Gilmour needles
KS C IEC 60512-25-3:2004 Connectors for electronic equipment-Tests and measurements-Part 25-3:Test 25c-Rise time degradation
KS C IEC 60512-25-3:2014 Connectors for electronic equipment－Tests and measurements－Part 25－3：Test 25c－Rise time degradation
KS R ISO 12351-2009(2019) Road vehicles－Determination of head contact and duration in impact tests
KS M ISO 9117:2007 Paints and varnishes－Determination of through-dry state and through-dry time：Method of test
KS M ISO 9117:2012 Paints and varnishes－Determination of through-dry state and through-dry time：Method of test
KS C 8539-2005 Testing procedure of long discharge rate lead-acid batteries for photovoltaic systems

工业和信息化部, Drop weight test time

HG/T 3213-2018 Test method for drop weight impact strength of plastic tower packing

Military Standard of the People's Republic of China-General Armament Department, Drop weight test time

GJB 349.22-1989 Conventional weapons finalization test method aerial bomb standard drop time
GJB 4613-1993*GJBz 20127.8-1993 False target design finalization test procedures erection time, removal time and number of erection tests
GJB 1009.10-1990 Anti-infantry jump mine final test procedures and timed self-destruction time test methods
GJB 573.23-1989 Fuze environment and performance test method air explosion time test
GJB 1009.8-1990 Anti-infantry mine jumping test procedure setting safety time test method
GJB 8697.27-2015 Rifle grenade test methods Part 27: Burning time test of incendiary ammunition column
GJB 736.16-1994 Pyrotechnics Test Method Ignition Pressure-Time Curve Determination
GJB 840.5-1990 Anti-tank track mine finalization test procedures and safety time test methods
GJB 5010.7-2003 Camouflage barrier design finalization test procedures Part 7: Erection and withdrawal time test
GJB 5214.10-2003 Special bullet effect test methods Part 10: Smoke screen time characteristics test of smoke bombs
GJB 5309.21-2004 Test methods for pyrotechnics Part 21: Detonation time determination
GJB 5309.26-2004 Test methods for pyrotechnics Part 26: Determination of bridge wire fusing time
GJB 854.3-1990 Anti-tank mine non-trigger fuze finalization test procedure setting safety time test method
GJB 564.2-1988 Filter absorber performance test method Cyanogen chloride vapor poison protection time
GJB 573.31-1990 Fuze environment and performance test method Safety test of missile escape from aircraft during interception and landing (ground launcher simulation)
GJB 5309.24-2004 Test methods for pyrotechnics Part 24: Determination of ignition pressure-time curve
GJB 736.16A-2019 Test methods for pyrotechnics Part 16: Determination of ignition pressure-time curve

Professional Standard - Chemical Industry, Drop weight test time

HG/T 3213-1987 Drop impact test of polypropylene pall packing
HG/T 3843-2008 Vulcanized rubber.Test method for short time static compression
HG/T 3843-2006 Test method for short-term static compression of vulcanized rubber

Professional Standard - Aerospace, Drop weight test time

QJ 3039-1998 Test method for drop weight impact sensitivity of composite solid propellants
QJ 1323.26-1987 Electromagnetic relay test method action, release and bounce time test

Japanese Industrial Standards Committee (JISC), Drop weight test time

JIS K 5600-5-3:1999 Testing methods for paints -- Part 5: Mechanical property of film -- Section 3: Falling-weight test
JIS K 5600-5-3 ERRATUM 1:2002 Testing methods for paints -- Part 5: Mechanical property of film -- Section 3: Falling-weight test (Erratum 1)
JIS R 2505:1981 Testing method for setting time of refractory mortars
JIS C 62137-1-3:2011 Surface mounting technology -- Environmental and endurance test methods for surface mount solder joint -- Part 1-3: Cyclic drop test
JIS C 60068-2-57:2002 Environmental testing -- Electrotechnical products -- Time-history vibration test method
JIS C 0057:2002 Environmental testing -- Electrotechnical products -- Time-history vibration test method
JIS A 1147:2001 Test method for time of setting of concrete mixtures by penetration resistance
JIS B 7740:2018 Metallic materials -- Charpy pendulum impact test -- Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
JIS C 61812-1:2014 Time relays for industrial and residential use -- Part 1: Requirements and tests
JIS A 1703:1976 General rules of testing method for working-space (maintenance, repair and change) of equipment units for dwellings

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Drop weight test time

GJB 5403.2-2005 Test method of launch safety of explosive charge Part 2: Drop hammer impact test
GJB 5383.2-2005 Test methods of sensitivity and stability for pyrotechnic Part 2: Test for impact sensitivity falling weight method
GJB 5383.3-2005 Test methods of sensitivity and stability for pyrotechnic. Part 3: Test for friction sensitivity. Single falling angle swing hammer method
GJB 5383.4-2005 Test methods of sensitivity and stability for pyrotechnic. Part 4: Test for friction sensitivity. Combine falling angle swing hammer method
GJB 5494.13-2005 Test method of rifle grenade Part 13:Test for igniting time
GJB 3196.41A-2005 Test methods of cartridge.Part 41:Flight time measurement
GJB 5494.25-2005 Test method of rifle grenade Part 25:Characteristic test of duration for smoke projectile
GJB 3196.43A-2005 Test methods of cartridge.Part 43:Action time in chamber.Indirect measure method
GJB 5494.27-2005 Test method of rifle grenade Part 27:Flame time determination of incendiary unit for combustion projectile
GJB 5389.35-2005 Test method of gun-launched missile Part 35:Operation time test of missile carried power
GJB 5494.23-2005 Test method of rifle grenade Part 23:Flare time test of illuminating projectile
GJB 5389.49-2005 Test method of gun-launched missile Part 49:Dischargins catridge bearer time inspection
GJB 3196.42A-2005 Test methods of cartridge.Part 42:Action time in chamber.Direct measure method
GJB 5384.19-2005 Test methods of performance for pyrotechnic composition. Part 19: Determination of obscuring time for smoke in visible region

American National Standards Institute （ANSI), Drop weight test time

ANSI/ASTM E208:1995 Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
ANSI/ASTM D2444:1999 Test Method For Determination Of The Impact Resistance Of Thermoplastic Pipe And Fittings By Means Of A Tup Falling Weight
ANSI/ASTM D4495:2012 Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
ANSI/ASTM D3056:2005 Test Method for Gel Time of Solventless Varnishes
ANSI/ASTM E292:2001 Test Methods for Conducting Time for Rupture Notch Tension Tests of Materials

ES-UNE, Drop weight test time

UNE 41250-3:2016 Test methods for measurement of pavement deflection. Part 3: Falling weight deflectometer

International Electrotechnical Commission (IEC), Drop weight test time

IEC PAS 62050:2004 Board level drop test method of components for handheld electronic products
IEC 60068-2-57:1999 Environmental testing - Part 2-57: Tests - Test Ff: Vibration - Time-history method
IEC 60749-37:2008 Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer
IEC 60068-2-57:1989 Environmental testing; part 2: test methods; test Ff: vibration; time-history method
IEC 61812-1:2011 Time relays for industrial and residential use - Part 1: Requirements and tests
IEC 62374-1:2010 Semiconductor devices - Part 1: Time-dependent dielectric breakdown (TDDB) test for inter-metal layers
IEC 60512-25-3:2001 Connectors for electronic equipment - Tests and measurements - Part 25-3: Test 25c; Rise time degradation
IEC 61169-1-5:2022 Radio frequency connectors - Part 1-5: Electrical test methods - Rise time degradation

The American Road & Transportation Builders Association, Drop weight test time

AASHTO T 99-2001 Standard Method of Test for Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop
AASHTO T 180-2001 Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop
AASHTO TP 73-2008 Provisional Standard Method of Test for Slump Flow of Self-Consolidating Concrete (SCC)

KR-KS, Drop weight test time

KS M ISO 6272-2-2013(2023) Paints and varnishes — Rapid deformation(impact resistance)tests–Part 2: Falling-weight test, small-area indenter
KS M ISO 6272-1-2013(2023) Paints and varnishes — Rapid-deformation (impact resistance) tests –Part 1: Falling-weight test, large-area indenter
KS C IEC 60068-2-85-2022 Environmental testing — Part 2-85: Tests — Test Fj: Vibration — Long time history replication
KS F ISO 9705-1-2022 Reaction to fire tests — Room corner test for wall and ceiling lining products — Part 1: Test method for a small room configuration
KS M ISO 9117-2007 Paints and varnishes－Determination of through-dry state and through-dry time：Method of test

WRC - Welding Research Council, Drop weight test time

BULLETIN 469-2002 CRACK-STARTER WELD BEAD DEPOSITION FOR ASTM E-208 DROP-WEIGHT TESTING: PART I) QUALIFICATION OF ELECTRODES FOR THE CRACK-STARTER BASED ON P-2 TYPE DROP-WIGHT SPECIMEN -ASTM E-208-95A; PART II) DETER

BE-NBN, Drop weight test time

NBN T 31-025-1985 Rubber, vulcanized - Time-interval between vulcanization and testing - Specification
NBN B 12-207-1978

机械电子工业部, Drop weight test time

JB 5858-1991 Time relay test procedures and test methods

VN-TCVN, Drop weight test time

TCVN 2100-1-2007 Paints and varnishes.Rapid-deformation(impact resistance)tests.Part1:Falling-weight test,large-area indenter
TCVN 2100-2-2007 Paints and varnishes.Rapid-deformation(impact resistance)tests.Part2:Falling-weight test,small-area indenter
TCVN 6017-1995 Cements.Test methods.Determination of setting time and soundness
TCVN 6017-2015 Cements -Test methods - Determination of setting time and soundness
TCVN 4031-1985 Cements.Test methods of standard consistency, times of setting and soundness

CEN - European Committee for Standardization, Drop weight test time

EN ISO 6272-1:2004 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test@ large-area indenter
EN ISO 6272-2:2006 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test@ small-area indenter

European Committee for Standardization (CEN), Drop weight test time

EN ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011)
EN ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter
EN 12491:2001 Paragliding Equipment - Emergency Parachutes - Safety Requirements and Test Methods
EN ISO 148-3:2016 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
HD 323.2.57 S1-1990 Basic environmental testing procedures; part 2: tests; test Ff: vibration; time-history method
prEN 60068-2-57-1992 Basic environmental testing procedures; part 2: tests; test Ff: vibration; time-history method (IEC 68-2-57:1989)
EN 29117:1992 Paints and Varnishes - Determination of Through-Dry State and Through-Dry Time - Method of Test; (ISO 9117 : 1990)
EN 3094:2017 Aerospace series - Sealants - Test method - determination of the application time
EN 196-3:2016 Methods of testing cement - Part 3: Determination of setting times and soundness
EN 196-3:1987 Methods of Testing Cement; Determination of Setting Time and Soundness
EN 196-3:1994 Methods of Testing Cement - Part 3: Determination of Setting Time and Soundness
prEN 196-3-1992 Methods of testing cement; part 3: determination of setting time and soundness
prEN ISO 148-3 rev Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
EN 14187-2:2003 Cold applied joint sealants - Part 2:Test method for the determination of tack free time
EN 14187-2:2017 Cold applied joint sealants - Test methods - Part 2: Determination of tack free time

Professional Standard - Building Materials, Drop weight test time

JC/T 774-2004 Test method for gel time of prepreg
JC/T 2123-2012 Test method for standard measurement of demould time for refractory castable

Malaysia Standards, Drop weight test time

MS 133 Pt.E3-2000 Methods of test for paints and varnishes:Part E3:Resistance to impact(Falling-weight test)(First revision)(ISO 6272:1993,MOD)

CENELEC - European Committee for Electrotechnical Standardization, Drop weight test time

EN 60068-2-57:1993 Environmental Testing Part 2: Test Methods - Test Ff: Vibration Time-History Method

European Committee for Electrotechnical Standardization（CENELEC）, Drop weight test time

EN 60068-2-57:2013 Environmental testing - Part 2-57: Tests - Test Ff: Vibration - Time-history and sine-beat method
EN 60068-2-57:2000 Environmental Testing Part 2-57: Tests - Test Ff: Vibration - Time-History Method (Remains Current)
HD 323.2.57 S1-1992 Basic Environmental Testing Procedures Part 2: Tests Test Ff: Vibration - Time-History Method
EN 61300-3-21:2015 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements - Switching time

Professional Standard - Ferrous Metallurgy, Drop weight test time

YB/T 5122-1993 Test method for setting time of refractory mortar

Society of Automotive Engineers (SAE), Drop weight test time

SAE J2052-2011 Test Device Head Contact Duration Analysis
SAE J2052-2005 Test Device Head Contact Duration Analysis

SAE - SAE International, Drop weight test time

SAE J2052-1990 Test Device Head Contact Duration Analysis@ Information Report
SAE J2052-2016 Test Device Head Contact Duration Analysis

Professional Standard - Aviation, Drop weight test time

HB 8619-2021 Test method for drop weight impact damage resistance of aerospace polymer matrix composite laminates

GB-REG, Drop weight test time

REG NASA-LLIS-0783-2000 Lessons Learned - Thermal Test Levels& Durations
REG NASA-LLIS-1166--2001 Lessons Learned ?International Space Station (ISS)/X-38/Space Flight Qualification Test Schedule

IT-UNI, Drop weight test time

UNI 7377-1974

TR-TSE, Drop weight test time

TS 279-1965 CREEP AND TIME FOR RUPTURE TENS?ON TESTS ON METALLIC MATERIALS
TS 285-1965 TESTING OF STEEL - CREEP AND TIME - FRACTURE TEST ON FUSION VVELDED BUTT JOINTS

European Association of Aerospace Industries, Drop weight test time

AECMA PREN 3094-1989 Aerospace Series Sealants Test Method Determination of Application Time
AECMA PREN 3096-1989 Aerospace Series Sealants Test Method Determination of Tack-Free Time
AECMA PREN 3098-1997 Aerospace Series Test Methods for Sealants Determination of the Curing Rate and Repairability After Storage in Fluids
AECMA PREN 3094-1995 Aerospace Series Sealants Test Method Determination of Application Time Edition P 1
AECMA PREN 3096-1995 Aerospace Series Sealants Test Method Determination of Tack-Free Time Edition P 1

国家市场监督管理总局、中国国家标准化管理委员会, Drop weight test time

GB/T 22459.3-2021 Refractory mortars—Part 3: Determination of joint stability
GB/T 2423.48-2018 Environmental testing—Part 2:Test methods—Test Ff: Vibration—Time-history and sine-beat method
GB/T 37250-2018 Test method for response time of functional ceramics for oxygen sensor

ES-AENOR, Drop weight test time

ZA-SANS, Drop weight test time

SANS 471:2003 Rubber - Temperatures, humidities and times for conditioning and testing
SANS 50196-3:2006 Methods of testing cement Part 3: Determination of setting times and soundness

PL-PKN, Drop weight test time

PN A79528-09-1992 Spirit (ethyl alcohol) Methods of tests Determination of permanganate time
PN M51079-01-1992 Portable fire extinguishers; description, duration of operation, efficiency tests, A and B fire tests

Electronic Components, Assemblies and Materials Association, Drop weight test time

ECA EIA-364-102-1998 TP-102 Rise Time Degradation Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems

GM Daewoo, Drop weight test time

GMKOREA EDS-T-7795-2011 TEST METHOD FOR THE CONTACT DRYING TIME OF POLYURETHANE ADHESIVE

Professional Standard - Military and Civilian Products, Drop weight test time

WJ 1902-1990 Simulation test method for temperature resistance duration in the chamber of combustible cartridges

NEMA - National Electrical Manufacturers Association, Drop weight test time

NEMA 77-2017 Temporal Light Artifacts: Test Methods and Guidance for Acceptance Criteria

Professional Standard - Nuclear Industry, Drop weight test time

EJ/T 1019-1996 Response time test of instrument channel important to safety in nuclear power plant

Aerospace, Security and Defence Industries Association of Europe (ASD), Drop weight test time

ASD-STAN PREN 3094-1989 Aerospace Series Sealants Test Method Determination of Application Time
ASD-STAN PREN 3094-1995 Aerospace Series Sealants Test Method Determination of Application Time (Edition P 1)

Professional Standard - Agriculture, Drop weight test time

GB 6324.3-1986 Test method for oxidation time of organic chemical products potassium permanganate

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Drop weight test time

PREN 3094-1989 Aerospace Series Sealants Test Method Determination of Application Time

Professional Standard - Commodity Inspection, Drop weight test time

SN/T 3054.1-2011 Test method of explosivity for import solid waste materials.Part 1:Time/pressure test

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Drop weight test time

ASHRAE LO-09-027-2009 Required Duration For Borehole Test Validated by Field Data

Guangdong Provincial Standard of the People's Republic of China, Drop weight test time

DB44/T 1682-2015 Mean time between failure test method for reliability test of vehicle-mounted wireless terminal communication service

Indonesia Standards, Drop weight test time

SNI 6430.2-2014 Standard test method for time of setting of grouts for preplaced-aggregate concrete in the laboratory

Canadian General Standards Board （CGSB), Drop weight test time

CGSB 4.2 NO. 27.11-94-CAN/CGSB-1994 Methodes Pour Epreuves Textiles Textiles - Determination De La Duree De Brulage En Surface Des Tissus

BG-BDS, Drop weight test time

BGC EN 196-3-2000 Methods of testing cement-Part 3:Determination of setting time and soundness

轻工业部, Drop weight test time

QB 1092-1991 Test method for thickness reduction of carpet after being subjected to moderate static load for a short period of time

未注明发布机构, Drop weight test time

DIN EN 196-3:1995 Methods of testing cement — Part 3: Determination of setting time and soundness