ZH
RU
ES

drop weight test

drop weight test, Total:497 items.

In the international standard classification, drop weight test involves: Paints and varnishes, Testing of metals, Mechanical testing, Equipment for petroleum and natural gas industries, Geology. Meteorology. Hydrology, Standardization. General rules, Petroleum, petroleum products and natural gas handling equipment, Plastics, Hand-held tools, Environmental testing, Electrical accessories, Waxes, bituminous materials and other petroleum products, Equipment for the chemical industry, Rubber and plastics products, Protection against dangerous goods, Road vehicles in general, Vibrations, shock and vibration measurements, Semi-manufactures of timber, Elements of buildings, Protection of and in buildings, Reinforced plastics, Printed circuits and boards, Pipeline components and pipelines, Road engineering, Electrical and electronic testing, Power transmission and distribution networks, Soil quality. Pedology, Glass, Products of the textile industry, Raw materials for rubber and plastics, Semiconductor devices, Equipment for the rubber and plastics industries, Non-metalliferous minerals, Construction equipment, Interior finishing, Rubber, Construction materials, Mining and quarrying, Linear and angular measurements, Footwear, Products of the chemical industry, Electronic component assemblies, Bottles. Pots. Jars, Mining equipment, Tyres, Paper and board, Rotating machinery, Photography, Freight distribution of goods, Protective equipment, Insulating materials, Vibration and shock with respect to human beings, Construction of airports, Water quality.

International Organization for Standardization (ISO), drop weight test

ISO 6272:1993 Paints and varnishes; falling-weight test
ISO/TR 6272:1979 Paints and varnishes — Falling weight test
ISO 15601:2000 Hammers - Technical specifications concerning steel hammer heads - Test procedures
ISO 1522:2022 Paints and varnishes — Pendulum damping test
ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter
ISO 6272-2:2002 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter
ISO 6272-1:2002 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter
ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter
ISO/R 442:1965 Verification of pendulum impact testing machines for testing steels
ISO 148-1:2009 Metallic materials - Charpy pendulum impact test - Part 1: Test method
ISO 148-1:2016 Metallic materials - Charpy pendulum impact test - Part 1: Test method
ISO 148-3:2008 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
ISO 148-3:2016 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
ISO/CD 13802 Plastics — Verification of pendulum impact-testing machines — Charpy, Izod and tensile impact-testing
ISO 14556:2023 Metallic materials — Charpy V-notch pendulum impact test — Instrumented test method
ISO 13802:1999 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing
ISO 14556 Metallic materials — Charpy V-notch pendulum impact test — Instrumented test method
ISO 13802:2015 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing
ISO 18907:2013 Imaging materials - Photographic films and papers - Wedge test for brittleness
ISO 2244-1:1972 Packaging — Complete, filled transport packages — Part 1: Horizontal impact tests (Inclined plane test, pendulum test)
ISO 148-2:2008 Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines
ISO 148-2:2016 Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines
ISO 18907:2000 Imaging materials - Photographic films and papers - Wedge test for brittleness
ISO 13802:1999/cor 1:2000 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing; Technical Corrigendum 1
ISO 9854-1:1994 Thermoplastics pipes for the transport of fluids - Determination of pendulum impact strength by the Charpy method - Part 1: General test method
ISO 16778:2015 Water quality - Calanoid copepod early-life stage test with Acartia tonsa

Association Francaise de Normalisation, drop weight test

NF T30-017:1994 Paints and varnishes. Falling-weight test.
NF E71-002:1988 TOOLS FOR HAMMERING,HITTING AND RIVETTING. HAMMERS. EYE STRENGTH TEST.
NF E71-002*NF ISO 15601:2000 Hammers - Technical specifications concerning steel hammer heads - Test procedures.
NF T51-104:1981 Plastics. Testing with the torsion pendulum.
NF C20-775:1998 Environmental testing. Part 2 : tests. Test Eh : hammer tests.
NF C20-700-2-75*NF EN 60068-2-75:2015 Environmental testing - Part 2-75 : tests - Test Eh : hammer tests
XP B53-853*XP CEN/TS 15676:2008 Wood flooring - Slip resistance - Pendulum test
XP CEN/TS 15676:2008 Plancher en bois - Résistance à la glissance - Essai au pendule
NF T30-017-1*NF EN ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1 : falling-weight test, large-area indenter
NF T30-017-2*NF EN ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2 : falling-weight test, small area indenter
NF A03-011-2:2009 Metallic materials - Charpy pendulum impact test - Part 2 : verification of testing machines.
NF A03-015:2001 Steel - Charpy V-notch pendulum impact test - Instrumented test method.
NF A03-011:1990 Metallic materials. Charpy impact test. Part 1 : test method.
NF A03-011-2*NF EN ISO 148-2:2017 Metallic materials - Charpy pendulum impact test - Part 2 : verification of testing machines
NF A03-011-1:2011 Metallic materials - Charpy pendulum impact test - Part 1 : test method.
NF T70-501:1995 Energetic materials for defense. Safety, vulnerability. Determination of impact sensitivity. Test with 30 kg fallhammer.
NF EN 12600:2003 Verre dans la construction - Essai au pendule - Méthode d'essai d'impact et classification du verre plat
NF EN ISO 13802:2015 Plastiques - Vérification des machines d'essai de choc pendulaire - Essais de choc Charpy, Izod et de choc-traction
NF T51-902:2006 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing.
NF A03-011-3:2009 Metallic materials - Charpy pendulum impact test - Part 3 : preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines.
NF EN ISO 28927-9:2010 Machines à moteur portatives - Méthodes d'essai pour l'évaluation de l'émission de vibrations - Partie 9 : marteaux dérouilleurs et marteaux à aiguilles
NF T51-902*NF EN ISO 13802:2015 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing
NF P78-223*NF EN 12600:2003 Glass in building - Pendulum test - Impact test method and classification for flat glass.
NF A03-015*NF EN ISO 14556:2015 Metallic maerials - Charpy V-notch pendulum impact test - Instrumented test method
NF A03-012:1992 Metallic materials. Charpy impact test. Part 2 : verification of the testing machine (pendulum impact).
NF EN 2829:1995 Série aérospatiale - Essai d'adhérence des revêtements métalliques par martelage
NF EN ISO 28927-10:2011 Machines à moteur portatives - Méthodes d'essai pour l'évaluation de l'émission de vibrations - Partie 10 : marteaux à percussion, perforateurs et brise-béton
NF G07-149:1981 TEXTILES. TESTING WOVEN FABRICS. DETERMINATION OF TEAR STRENGTH UNDER LIVE FORCE. INITIATED TEAR. (LOW CAPACITY DROP HAMMER).
NF G37-132:1988 Rubber or plastics coated textile backings. Determination of the flexibility. Pendulum method.
NF T66-037*NF EN 13588:2017 Bitumen and bituminous binders - Determination of cohesion of bituminous binders with pendulum test

CZ-CSN, drop weight test

CSN 42 0346-1979 Metal testing. Determination of transition temperature of structural steels using the bending-impact test of large pieces of original thickness
CSN 72 2342-1983 Slump test

Professional Standard - Light Industry, drop weight test

QB/T 2918-2007 Case and bag.Test method for impact resistance by means of falling weight
QB 1053-1991 Pendulum Tensile Strength Testing Machine

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, drop weight test

GB/T 8363-2018 Steel—Drop-weight tear tests method

IN-BIS, drop weight test

Danish Standards Foundation, drop weight test

DS/EN 10274:2000 Metallic materials - Drop weight tear test
DS/CEN/TS 15676:2008 Wood flooring - Slip resistance - Pendulum test
DS/EN ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter
DS/EN ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter
DS/EN ISO 1522:2007 Paints and varnishes - Pendulum damping test
DS/IEC 68-2-63:1993 Environmental testing. Part 2: Test methods. Test Eg: Impact, spring hammer
DS/EN 12600:2003 Glass in building - Pendulum test - Impact test method for flat glass
DS/EN 14231:2003 Natural stone test methods - Determination of the slip resistance by means of the pendulum tester
DS/EN ISO 14556:2000 Steel - Charpy V-notch pendulum impact test - Instrumented test method
DS/EN ISO 14556/A1:2006 Steel - Charpy V-notch pendulum impact test - Instrumented test method - Amendment 1: Annex D - Instrumented Charpy V-notch pendulum impact test of sub-size test pieces
DS/EN ISO 13802:2006 Plastics – Verification of pendulum impact-testing machines – Charpy, Izod and tensile impact-testing
DS/IEC 68-2-62:1992 Environmental testing. Part 2: Test methods. Test Ef: Impact,pendulum hammer
DS/EN 13036-4:2012 Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test
DS/EN 13588:2008 Bitumen and bituminous binders - Determination of cohesion of bituminous binders with pendulum test

Lithuanian Standards Office , drop weight test

LST EN 10274-2000 Metallic materials - Drop weight tear test
LST EN ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011)
LST EN ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011)
LST EN 14231-2004 Natural stone test methods - Determination of the slip resistance by means of the pendulum tester
LST EN ISO 1522:2007 Paints and varnishes - Pendulum damping test (ISO 1522:2006)
LST EN 12600-2003 Glass in building - Pendulum test - Impact test method and classification for flat glass
LST EN ISO 14556:2000 Steel - Charpy V-notch pendulum impact test - Instrumented test method (ISO 14556:2000)
LST EN ISO 14556:2000/A1:2006 Steel - Charpy V-notch pendulum impact test - Instrumented test method - Amendment 1: Annex D - Instrumented Charpy V-notch pendulum impact test of sub-size test pieces (ISO 14556:2000/Amd 1:2006)
LST EN ISO 13802:2006 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing (ISO 13802:1999, including Corrigendum 1:2000)
LST EN 13036-4-2012 Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test
LST EN 13588-2008 Bitumen and bituminous binders - Determination of cohesion of bituminous binders with pendulum test

AENOR, drop weight test

UNE-EN 10274:1999 METALLIC MATERIALS. DROP WEIGHT TEAR TEST
UNE-CEN/TS 15676:2008 Wood flooring - Slip resistance - Pendulum test
UNE-EN ISO 6272-2:2012 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011)
UNE-EN ISO 6272-1:2012 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011)
UNE-EN 14231:2004 Natural stone test methods - Determination of the slip resistance by means of the pendulum tester
UNE-EN ISO 1522:2007 Paints and varnishes - Pendulum damping test (ISO 1522:2006)
UNE-EN 12600:2003 Glass in building - Pendulum test - Impact test method and classification for flat glass.
UNE-EN ISO 148-1:2017 Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016)
UNE-EN 13036-4:2012 Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test
UNE-EN 13588:2008 Bitumen and bituminous binders - Determination of cohesion of bituminous binders with pendulum test

German Institute for Standardization, drop weight test

DIN EN 10274:1999-07 Metallic materials - Drop weight tear test; German version EN 10274:1999
DIN EN 60068-2-75:1998 Environmental testing - Part 2: Tests; test Eh: Hammer tests (IEC 60068-2-75:1997); German version EN 60068-2-75:1997
DIN 53512:2000 Testing of rubber - Determination of rebound resilience (Schob pendulum)
DIN EN ISO 148-2:2017-05 Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines (ISO 148-2:2016); German version EN ISO 148-2:2016
DIN EN 10045-1:1991 Charpy impact test on metallic materials; part 1: test method; german version EN 10045-1:1990
DIN EN ISO 148-1 Beiblatt 1:2014-02 Metallic materials - Charpy pendulum impact test - Part 1: Test method; Supplement 1: Special test pieces
DIN EN ISO 148-1:2017-05 Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016); German version EN ISO 148-1:2016
DIN EN 60749-37:2008 Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer (IEC 60749-37:2008); German version EN 60749-37:2008
DIN EN 12600:2003-04 Glass in building - Pendulum tests - Impact test method and classification for flat glass; German version EN 12600:2002
DIN EN ISO 13802:2016-07 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing (ISO 13802:2015, Corrected version 2016-04-01); German version EN ISO 13802:2015
DIN EN 12600:2003 Glass in building - Pendulum tests - Impact test method and classification for flat glass; German version EN 12600:2002
DIN 52295:2010 Testing of glass - Pendulum impact test on containers - Testing by attributes and by variables
DIN 52295:1993 Testing of glass; pendulum impact test on containers; testing by attributes and by variables
DIN EN ISO 13802:2006 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing (ISO 13802:1999, including Corrigendum 1:2000); English version of DIN EN ISO 13802:2006-06
DIN EN 60068-2-75:2015 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests (IEC 60068-2-75:2014); German version EN 60068-2-75:2014
DIN 53142-1:2014 Testing of board - Puncture test - Part 1: Puncture test with a pendulum punching device
DIN 53142-1:2004 Testing of board - Puncture test - Part 1: Puncture test with a pendulum punching device
DIN EN ISO 148-3:2017-04 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2016); German version EN ISO 148-3:2016
DIN EN ISO 148-2:2009 Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines (ISO 148-2:2008); English version of DIN EN ISO 148-2:2009-09
DIN EN ISO 14556:2023-08 Metallic materials - Charpy V-notch pendulum impact test - Instrumented test method (ISO 14556:2023); German version EN ISO 14556:2023
DIN EN ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011); German version EN ISO 6272-1:2011
DIN EN ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011); German version EN ISO 6272-2:2011
DIN 51222:2017 Materials testing machines - Impact test - Particular requirements on pendulum impact testing machines with a capacity of nominal energy <= 50 J and verification
DIN EN ISO 6272-2:2011-11 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011); German version EN ISO 6272-2:2011
DIN EN ISO 6272-1:2011-11 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011); German version EN ISO 6272-1:2011
DIN EN ISO 148-3:2017 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2016); German version EN ISO 148-3:2016
DIN 51222:2016 Materials testing machines - Impact test - Particular requirements on pendulum impact testing machines with a capacity of nominal energy <= 50 J and verification
DIN EN ISO 179-1:2006 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2000 + Amd.1:2005); German version EN ISO 179-1:2000 + A1:2005
DIN EN ISO 148-3:2009 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2008); English version of DIN EN ISO 148-3:2009-06
DIN EN ISO 148-1:2017 Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016); German version EN ISO 148-1:2016
DIN EN ISO 148-1:2011 Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2009); German version EN ISO 148-1:2010
DIN EN ISO 179-2:2012 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:1997 + Amd.1:2011); German version EN ISO 179-2:1999 + A1:2012
DIN EN ISO 179-2:2000 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:1997); German version EN ISO 179-2:1999

Professional Standard - Machinery, drop weight test

JB/T 12275-2015 Drop-weight impact testing machines used for metallic materials
JB/T 9389-2008 Specification for falling weight impact testing machines used for non-metallic materials
JB/T 6865-1993 Pendulum type high and low temperature impact testing machine technical conditions

Professional Standard - Petroleum, drop weight test

SY/T 6476-2013 Practice for drop-weight tear tests on steel line pipe
SY/T 6476-2000 Drop-weight tear tests of steel pipe
SY/T 6476-2007 Practice for drop-weight tear tests on steel line pipe
SY 0040-2013 Test method for impact resistance of pipeline anti-corrosion coating (drop weight test method)
SY/T 0040-2013 Test method for impact resistance of pipeline coatings.(Falling weight test)
SY/T 0040-1997 Test method for impact resistance of pipeline caotings(Falling weight test)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, drop weight test

GB/T 8363-1987 Metallic materials--Drop-weight tear tests of ferritic steels
GB/T 8363-2007 Test method for drop-weight tear tests of steel products
GB/T 14153-1993 General test method for impact resistance of rigid plastics by means of falling weight
GB/T 6803-1986 Standard method for conducting drop weight test to determine nil ductility transition temperature of ferritic steels
GB 11548-1989 Test method for impact resistance of rigid plastic sheets (dropping weight method)
GB/T 11548-1989 Standard test method for impact resistance of rigid plastic sheeting by means of a tup(falling weight)
GB/T 6803-2008 Test method for drop-weight test to determine nil-ductility transition temperature of ferritic steels
GB/T 3808-2002 Verification of pendulum-type impact testing machines(ISO 148-2:1998,Metallic materials--Charpy pendulum impact test--Part 2: Verification of test machines,MOD)
GB/T 2423.55-2023 Environmental testing Part 2: Test methods Test Eh: Hammer test
GB/T 20624.1-2006 Paints and varnishes. Rapid-deformation(impact resistance) tests. Part 1: Falling-weight test, large-area indenter
GB/T 20624.2-2006 Paints and varnishes. Rapid-deformation(impact resistance) tests. Part 2: Falling-weight test, small-area indenter
GB/T 2423.55-2006 Environmental testing for electric and electronic products.Part 2:Test methods.Test Eh:Hammer tests
GB/T 6945-1986 Methods of performance test for tubular diesel pile hammer
GB/T 8809-2015 Pendulum impact resistance of plastic film
GB/T 8809-1988 Test method for pendulum impact resistance of plastic films
GB/T 229-2007 Metallic materials- Charpy pendulum impact test method
GB/T 2423.46-1997 Environmental testing for electric and electronic products. Part 2: Tests methods. Test Ef: Impact, pendulum hammer
GB/T 18658-2002 Charpy V reference test pieces for verification of pendulum-type impact testing machines (ISO 148-3:1998,Metallic materials--Charpy pendulum impact test--Part 3: Preparation and characterization of charpy V reference test pieces for verification of test
GB/T 19748-2005 Steel.Charpy V-notch pendulum impact test.Instrumented test method
GB/T 2423.44-1995 Environmental testing for electric and electronic products. Part 2: Test methods. Test Eg:Impact, spring hammer
GB/T 30195-2023 Pendulum test method for impact resistance performance of passenger car tires
GB/T 18658-2018 Charpy V-notch reference test pieces for indirect verification of pendulum impact testing machines
GB/T 21189-2007 Verification of pendulum impact-testing machines used for charpy,lzod and tensile impact-testing of plastics

National Metrological Technical Specifications of the People's Republic of China, drop weight test

JJF 1445-2014 Calibration Specification for Falling Weight Impact Testing Machines
JJF 1300-2011 Program of Pattern Evaluation of Pendulum Impact Testing Machines
JJF(航空) 036-1988 Verification method of pendulum weighing instrument for impact testing machine
JJF 1320-2011 Calibration Specification for Instrumented Charpy Pendulum Impact Testing Machines

API - American Petroleum Institute, drop weight test

API RP 5L3-2014 Drop-Weight Tear Tests on Line Pipe (FOURTH EDITION)
API RP 5L3 RUSSIAN-2014 Recommended Practice for Conducting Drop-Weight Tear Tests on Line Pipe (ЧЕТВЕРТАЯ РЕДАКЦИЯ)
API RP 5L3-1996 Recommended Practice for Conducting Drop-Weight Tear Tests on Line Pipe (Third Edition)
API RP 5L3 RUSSIAN-1996 Recommended Practice for Conducting Drop-Weight Tear Tests on Line Pipe (Third Edition)
API RP 5L3-1969 Recommended Practice for Conducting Drop-Weight Tear Tests on Line Pipe (First Edition)
API RP 5L3 KAZAKH-1996 RECOMMENDED PRACTICE FOR CONDUCTING DROP-WEIGHT TEAR TESTS ON LINE PIPE (Third Edition)
API RP 5L3-1978 RECOMMENDED PRACTICE FOR CONDUCTING DROP-WEIGHT TEAR TESTS ON LINE PIPE SECOND EDITION

American Petroleum Institute (API), drop weight test

API RP 5L3-2014(2021) Drop-Weight Tear Tests on Line Pipe (FOURTH EDITION)

Standard Association of Australia （SAA）, drop weight test

AS 1330:2019 Metallic materials — Drop weight tear test for steels
AS 1580.406.1:2004 Paints and related materials - Methods of test - Resistance to impact - Falling weight test (Gardner-type tester)
AS 60068.2.75:2003 Environmental testing - Tests - Test Eh: Hammer tests
AS/NZS 4347.6:1995 Damp-proof courses and flashings - Methods of test - Determining impact resistance (falling dart impact test)
AS/NZS 2512.3.2:1997 Methods of testing protective helmets - Determination of impact energy attenuation - Striker drop test
AS 2001.2.8:2001 Methods of test for textiles - Physical tests - Determination of tear force of fabrics using the ballistic pendulum method (Elmendorf)
AS 1141.42:1999 Methods for sampling and testing aggregates - Pendulum friction test

国家能源局, drop weight test

SY/T 6476-2017 Drop weight tear test method for pipeline steel pipes

American Society for Testing and Materials (ASTM), drop weight test

ASTM E436-91(1997) Standard Test Method for Drop-Weight Tear Tests of Ferritic Steels
ASTM E436-03(2021) Standard Test Method for Drop-Weight Tear Tests of Ferritic Steels
ASTM G14-04 Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
ASTM G14-88(1996)e1 Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
ASTM G14-04(2018) Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
ASTM E436-03 Standard Test Method for Drop-Weight Tear Tests of Ferritic Steels
ASTM G14-04(2010) Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
ASTM G14-04(2010)e1 Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
ASTM E208-06(2012) Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
ASTM E680-79(1999) Standard Test Method for Drop Weight Impact Sensitivity Of Solid-Phase Hazardous Materials
ASTM E680-79(2018) Standard Test Method for Drop Weight Impact Sensitivity of Solid-Phase Hazardous Materials
ASTM E208-06 Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
ASTM E680-79(2011)e1 Standard Test Method for Drop Weight Impact Sensitivity of Solid-Phase Hazardous Materials
ASTM D4495-00 Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
ASTM D4495-00(2005) Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
ASTM E208-20e1 Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
ASTM E2583-07(2015) Standard Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD)
ASTM D4272-08 Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop
ASTM D4272-08a Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop
ASTM D4272-14 Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop
ASTM D4272/D4272M-15 Standard Test Method for Total Energy Impact of Plastic Films by Dart Drop
ASTM D4495-12 Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
ASTM D1424-96 Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus
ASTM D1424-96(2004) Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus
ASTM D1424-09 Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus
ASTM D1424-09(2013) Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus
ASTM D5628-10 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
ASTM D2444-99(2005) Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
ASTM F736-17(2023) Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
ASTM D2463-15 Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers
ASTM D3939-97a Standard Test Method for Snagging Resistance of Fabrics (Mace Test Method)
ASTM D3939-03 Standard Test Method for Snagging Resistance of Fabrics (Mace)
ASTM D3939-03(2004) Standard Test Method for Snagging Resistance of Fabrics (Mace)
ASTM D5628-07 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
ASTM D5628-06 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
ASTM D1424-07a Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus
ASTM F736-95(2001) Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
ASTM F736-95(2006) Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
ASTM D5628-96(2001)e1 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
ASTM D2444-99(2010) Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
ASTM D4495-21 Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
ASTM D1424-09(2013)e1 Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus
ASTM D5420-98a Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
ASTM F736-95(2011) Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
ASTM C1908-21 Standard Test Method for Pummel Adhesion Testing of Two-ply Laminated Architectural Glass
ASTM D5734-95(2001) Standard Test Method for Tearing Strength of Nonwoven Fabrics by Falling-Pendulum (Elmendorf) Apparatus
ASTM D5420-04 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
ASTM D5420-10 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
ASTM D3939/D3939M-10 Standard Test Method for Snagging Resistance of Fabrics (Mace)
ASTM D3939/D3939M-11 Standard Test Method for Snagging Resistance of Fabrics (Mace)
ASTM D3939/D3939M-13 Standard Test Method for Snagging Resistance of Fabrics (Mace)
ASTM D3420-14 Standard Test Method for Pendulum Impact Resistance of Plastic Film
ASTM D3420-08a Standard Test Method for Pendulum Impact Resistance of Plastic Film
ASTM E303-22 Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
ASTM D4366-16 Standard Test Methods for Hardness of Organic Coatings by Pendulum Damping Tests
ASTM D3420-95 Standard Test Method for Pendulum Impact Resistance of Plastic Film
ASTM D3420-21 Standard Test Method for Pendulum Impact Resistance of Plastic Film
ASTM D3420-95(2002) Standard Test Method for Pendulum Impact Resistance of Plastic Film
ASTM D3420-08 Standard Test Method for Pendulum Impact Resistance of Plastic Film
ASTM D7136/D7136M-12 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
ASTM E303-93(1998) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
ASTM D6110-06 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D5873-05 Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method
ASTM D5873-00(2005)e1 Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method
ASTM D1054-02(2007) Standard Test Method for Rubber Property-Resilience Using a Goodyear-Healey Rebound Pendulum
ASTM D1054-02 Test Method for Rubber Property-Resilience Using a Goodyear-Healey Rebound Pendulum
ASTM D1054-02e1 Standard Test Method for Rubber Property-Resilience Using a Goodyear-Healey Rebound Pendulum
ASTM E303-93(2013) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
ASTM D7136/D7136M-15 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
ASTM D1054-91(2000) Standard Test Method for Rubber Property-Resilience Using a Rebound Pendulum
ASTM D5873-00 Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method
ASTM D256-10e1 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM D5873-14 Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method
ASTM E303-93(2008) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
ASTM D8161-17(2022) Standard Test Method for Impact Resistance of Thermoplastic Pavement Marking Materials over a Highway Substrate by Means of a Striker Impacted by a Falling Weight
ASTM D256-05a Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM D256-05 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM D6110-02 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D6110-04 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D6110-97 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D6110-08 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D6110-05 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D256-06 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM D256-06a Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM D7121-05(2012) Standard Test Method for Rubber Propertymdash;Resilience Using Schob Type Rebound Pendulum
ASTM D256-10 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM D7382-20 Standard Test Methods for Determination of Maximum Dry Unit Weight of Granular Soils Using a Vibrating Hammer

Professional Standard - Water Conservancy, drop weight test

SL 410-2007 Calibrating code for dynamic perforation test(con-drop test) instrument

Taiwan Provincial Standard of the People's Republic of China, drop weight test

CNS 13784-1996 General Rules for Testing Impact Strength of Rigid Plastic by the Falling Weigth Method
CNS 14969-2-75-2006 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
CNS 10703-1993 Method of Pendulum Impact Test for Bumpers of Passenger Cars

British Standards Institution (BSI), drop weight test

BS 3900-E3:1973 Methods of test for paints - Impact (falling weight) resistance
BS EN ISO 6272-1:2004 Paints and varnishes - Rapid-deformation (impact resistance) tests - Falling-weight test, large-area indenter
BS EN ISO 148-1:2010 Metallic materials. Charpy pendulum impact test. Test method
BS EN ISO 148-2:2009 Metallic materials. Charpy pendulum impact test. Verification of testing machines
BS EN ISO 148-2:2008 Metallic materials - Charpy pendulum impact test - Verification of testing machines
BS EN 10045-2:1993(1999) Metallic Materials - Charpy Impact Test - Part 2: Verification of the Testing Machine (Pendulum Impact)
BS EN 60749-37:2008 Semiconductor devices — Mechanical and climatic test methods — Part 37: Board level drop test method using an accelerometer
BS 3900-E8:1974 Methods of test for paints - Resistance to impact (pendulum test)
BS EN 60749-40:2011 Semiconductor devices. Mechanical and climatic test methods. Board level drop test method using a strain gauge
BS EN ISO 6272-2:2011 Paints and varnishes. Rapid-deformation (impact resistance) tests. Falling-weight test, small-area indenter
BS EN 14231:2003 Natural stone test methods - Determination of the slip resistance by means of the pendulum tester
BS EN ISO 6272-1:2011 Paints and varnishes. Rapid-deformation (impact resistance) tests. Falling-weight test, large-area indenter
BS EN ISO 148-2:2016 Tracked Changes. Metallic materials. Charpy pendulum impact test. Verification of testing machines
BS EN ISO 13802:2015 Plastics. Verification of pendulum impact-testing machines. Charpy, Izod and tensile impact-testing
BS EN ISO 13802:2006 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing
BS EN ISO 148-1:2016 Tracked Changes. Metallic materials. Charpy pendulum impact test. Test method
BS ISO 18907:2013 Imaging materials. Photographic films and papers. Wedge test for brittleness
BS EN ISO 148-3:2016 Tracked Changes. Metallic materials. Charpy pendulum impact test. Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
BS ISO 29584:2015 Glass in building. Pendulum impact testing and classification of safety glass
BS EN 12600:2002(2010) Glass in building. Pendulum test. Impact test method and classification for flat glass
BS EN ISO 28927-6:2010 Hand-held portable power tools. Test methods for evaluation of vibration emission. Rammers
BS EN ISO 28927-6:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Rammers
BS EN ISO 14556:2023 Tracked Changes. Metallic materials. Charpy V-notch pendulum impact test. Instrumented test method
BS 3900-A20:1998 Methods of test for paints. Determination of density by the immersed body (plummet) method
BS EN 60068-2-32:1993 Environmental testing - Test methods - Test Ed - Free fall
BS EN 12350-2:2009 Testing fresh concrete - Slump-test
BS EN ISO 28927-11:2011 Hand-held portable power tools. Test methods for evaluation of vibration emission. Stone hammers
BS ISO 16778:2015 Water quality - Calanoid copepod early-life stage test with Acartia tonsa

Professional Standard - Military and Civilian Products, drop weight test

WJ 233-1977 Hammer testing machine
WJ 2426-1997 Pneumatic hammer test method
WJ 2257-1994 Hammer testing machine verification regulations
WJ 2168-1993 Hammer test method for flash caps and detonators

Professional Standard - Railway, drop weight test

TB/T 1961-1987 Vehicle buffer performance and drop weight test method

KR-KS, drop weight test

KS B ISO 15601-2017 Hammers — Technical specifications concerning steel hammer heads — Test procedures
KS C IEC 60068-2-75-2017 Environmental testing－Part 2：Tests－Test Eh：Hammer tests
KS M ISO 6272-2-2013(2023) Paints and varnishes — Rapid deformation(impact resistance)tests–Part 2: Falling-weight test, small-area indenter
KS M ISO 6272-1-2013(2023) Paints and varnishes — Rapid-deformation (impact resistance) tests –Part 1: Falling-weight test, large-area indenter
KS M ISO 13802-2016 Plastics－Verification of pendulum impact-testing machines－Charpy, Izod and tensile impact-testing

Korean Agency for Technology and Standards (KATS), drop weight test

KS F 2379-2017(2022) Testing method for deflections with a falling-weight-type impulse load device
KS B ISO 15601:2017 Hammers — Technical specifications concerning steel hammer heads — Test procedures
KS B 3600-2001(2011) Hammers－Technical specifications concerningsteel hammer heads－Test procedures
KS B ISO 15601-2017(2022) Hammers — Technical specifications concerning steel hammer heads — Test procedures
KS B 3600-2001 Hammers－Technical specifications concerningsteel hammer heads－Test procedures
KS C IEC 60068-2-75-2017(2022) Environmental testing－Part 2：Tests－Test Eh：Hammer tests
KS D 0285-2005 Standard test method for conducting drop-weight test to determine nill-ductility transition temperature of ferritic steels
KS D 0285-2015(2020) Standard test method for conducting drop-weight test to determine nill-ductility transition temperature of ferritic steels
KS C IEC 60068-2-75:2010 Environmental testing-Part 2:Tests-Test Eh:Hammer tests
KS C IEC 60068-2-75:2017 Environmental testing－Part 2：Tests－Test Eh：Hammer tests
KS M ISO 6272-2-2013(2018) Paints and varnishes — Rapid deformation(impact resistance)tests–Part 2: Falling-weight test, small-area indenter
KS M ISO 6272-1-2013(2018) Paints and varnishes — Rapid-deformation (impact resistance) tests –Part 1: Falling-weight test, large-area indenter
KS D ISO 148-1:2007 Metallic materials-Charpy pendulum impact test-Part 1:Test method
KS D ISO 148-1:2015 Metallic materials-Charpy pendulum impact test-Part 1:Test method
KS M ISO 1522-2008(2019) Paints and varnishes－Pendulum damping test
KS M ISO 6272-1:2010 Paints and varnishes-Rapid-deformation(impact resistance) tests-Part 1:Falling-weight test, large-area indenter
KS M ISO 6272-2:2008 Paints and varnishes-Rapid-deformation(impact resistance) tests-Part 2:Falling-weight test, small-area indenter
KS M ISO 6272-2:2013 Paints and varnishes — Rapid deformation(impact resistance)tests–Part 2: Falling-weight test, small-area indenter
KS M ISO 6272-1:2013 Paints and varnishes — Rapid-deformation (impact resistance) tests –Part 1: Falling-weight test, large-area indenter
KS C 0239-1995(2015) Environmental testing Part 2:Test methods Test Eg:Impact, spring hammer.
KS D 0285-2015 Standard test method for conducting drop-weight test to determine nill-ductility transition temperature of ferritic steels
KS B ISO 148-2:2004 Metallic materials-Charpy pendulum impact test-Part 2:Verification of test machines
KS F 2312-2016(2021) Test method for soil compaction using a rammer
KS B ISO 148-2:2013 Metallic materials－Charpy pendulum impact test－Part 2：Verification of test machines
KS F 2379-2017 Testing method for deflections with a falling-weight-type impulse load device
KS B 5546-2003(2018)
KS F 2602-2016(2021) Method of test for floor slipperiness(Pendulum type)
KS B 5546-1993
KS F 2375-2016 Testing method for measuring surface frictional properties using the British Pendulum Tester
KS D ISO 148-1-2007(2012) Metallic materials－Charpy pendulum impact test－Part 1：Test method
KS B ISO 14556-2002(2012) Steel－Charpy V－notch pendulum impact test－Instrumented test method
KS B 5546-2003 Pendulum－Type impact testing machines for non－metallic materials
KS C 0239-1995 Environmental testing Part 2:Test methods Test Eg:Impact, spring hammer.
KS F 2375-2016(2021) Testing method for measuring surface frictional properties using the British Pendulum Tester
KS F 2312-2016 Test method for soil compaction using a rammer
KS M ISO 13802-2016(2021) Plastics－Verification of pendulum impact-testing machines－Charpy, Izod and tensile impact-testing
KS M ISO 13802:2012 Plastics-Verification of pendulum impact-testing machines-Charpy, Izod and tensile impact-testing
KS M ISO 13802:2016 Plastics－Verification of pendulum impact-testing machines－Charpy, Izod and tensile impact-testing
KS B 5544-2003(2018)
KS M ISO 179-2:2012 Plastics－Determination of Charpy impact properties－Part 2：Instrumented impact test

工业和信息化部, drop weight test

HG/T 3213-2018 Test method for drop weight impact strength of plastic tower packing
JB/T 13810-2020 Instrumented Charpy Pendulum Impact Testing Machine

Professional Standard - Chemical Industry, drop weight test

HG/T 3213-1987 Drop impact test of polypropylene pall packing
HG/T 6137-2023 Pendulum car tire impact testing machine

RU-GOST R, drop weight test

GOST 8818-1973 Flattening test of metals
GOST 2310-1977 Steel bench hammers. Specifications
GOST 16844-1993 Vibration. Requirements for testing mechanical hammers
GOST 33496-2015 Polymer composites. Method for testing the resistance to damage during a falling weight impact
GOST R ISO 148-1-2013 Metallic materials. Charpy pendulum impact test. Part 1.Test method
GOST R 55162-2012 Mining equipment. Pneumatic hammers. Safety requirements and test methods
GOST IEC 60745-2-6-2011 Hand-held motor-operated electric tools. Safety and test methods. Part 2-6. Particular requirements for hammers and rotary hammers
GOST 32564.2-2013 Glass and glass products. Test method for resistance to impact of hammer and axe

Professional Standard - Aerospace, drop weight test

QJ 3039-1998 Test method for drop weight impact sensitivity of composite solid propellants

Japanese Industrial Standards Committee (JISC), drop weight test

JIS K 5600-5-3:1999 Testing methods for paints -- Part 5: Mechanical property of film -- Section 3: Falling-weight test
JIS B 7722:1990 Charpy impact testing machines
JIS C 60068-2-75:2004 Environmental testing -- Part 2-75: Tests -- Test Eh: Hammer tests
JIS C 60068-2-75:2019 Environmental testing -- Part 2-75: Tests -- Test Eh: Hammer tests
JIS B 7722:1999 Charpy pendulum impact test -- Verification of testing machines
JIS K 5600-5-3 ERRATUM 1:2002 Testing methods for paints -- Part 5: Mechanical property of film -- Section 3: Falling-weight test (Erratum 1)
JIS B 7740:1999 Charpy pendulum impact test -- Reference test pieces for verification of testing machines
JIS C 0046:1993 Environmental testing Part 2: Test methods Test Eg: Impact, spring hammer
JIS A 1407:1994 Method of test for floor slipperiness (Pendulum type)
JIS A 1210:1999 Test method for soil compaction using a rammer
JIS R 3110:2021 Pendulum impact test method for glass in building
JIS B 7722:2018 Metallic materials -- Charpy pendulum impact test -- Verification of testing machines
JIS B 7739:2011 Pendulum-type impact-testing machines for Non-Metallic Materials -- Verification of testing machines
JIS B 7755:2011 Charpy pendulum impact test for metal -- Instrumentation
JIS B 7739:1989 Pendulum-type impact testing machines for non-metallic materials
JIS C 62137-1-3:2011 Surface mounting technology -- Environmental and endurance test methods for surface mount solder joint -- Part 1-3: Cyclic drop test
JIS K 7211:1976 General rules for testing impact strength of rigid plastics by the falling weight method
JIS K 7077:1991 Testing method for charpy impact strength of carbon fiber reinforced plastics
JIS C 0044:1995 Environmental testing Part 2: Tests. Test Ed: Free fall

PT-IPQ, drop weight test

NP 269-1962 Métaux. Essa! de choo Oharpy isur éprouvette entaillée

Professional Standard - Construction Industry, drop weight test

JG/T 5048-1994 Vibratory pile hammer.Test methods
JG/T 5053.3-1995 Tubular diesel pile hammer.Test method for performance
JG/T 5049.2-1994 Vibratory pile hammer.Test procedures for vibration resistant asynchronous three-phase motor

BE-NBN, drop weight test

NBN-EN 10045-2-1993 Metallic materials. Charpy impact test. Part 2: Verification of the testing machine (pendulum impact)
NBN-EN 10045-1-1992 Metallic materials - Charpy impact test - Part 1: Test method

RO-ASRO, drop weight test

STAS SR EN 10045-2-1994 Metallic materials. Charpy impact test. Part 2: Verification of the testing machine (pendulum impact)
STAS 7238-1980 PENDULUM IMPACT TESTING MACHIXES, FOR TESTING MATERIALS

European Committee for Electrotechnical Standardization（CENELEC）, drop weight test

EN 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
EN 60068-2-75:1997 Environmental Testing Part 2: Tests - Test Eh: Hammer Tests (Remains Current)

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, drop weight test

GJB 5403.2-2005 Test method of launch safety of explosive charge Part 2: Drop hammer impact test
GJB 5383.2-2005 Test methods of sensitivity and stability for pyrotechnic Part 2: Test for impact sensitivity falling weight method
GJB 5383.3-2005 Test methods of sensitivity and stability for pyrotechnic. Part 3: Test for friction sensitivity. Single falling angle swing hammer method
GJB 5383.4-2005 Test methods of sensitivity and stability for pyrotechnic. Part 4: Test for friction sensitivity. Combine falling angle swing hammer method
GJB 3196.46A-2005 Test methods of cartridge.Part 46:Safety test of explosive Cartridge.Hammering method

VN-TCVN, drop weight test

TCVN 7699-2-75-2011 Environmental testing.Part 2-75: Tests.Test Eh: Hammer tests
TCVN 2100-1-2007 Paints and varnishes.Rapid-deformation(impact resistance)tests.Part1:Falling-weight test,large-area indenter
TCVN 2100-2-2007 Paints and varnishes.Rapid-deformation(impact resistance)tests.Part2:Falling-weight test,small-area indenter

国家市场监督管理总局、中国国家标准化管理委员会, drop weight test

GB/T 3808-2018 Verification of pendulum-type impact testing machines
GB/T 229-2020 Metallic materials—Charpy pendulum impact test method
GB/T 19748-2019 Metallic materials—Charpy V-notch pendulum impact test—Instrumented test method
GB/T 26548.11-2021 Hand-held portable power tools—Test methods for evaluation of vibration emission—Part 11:Stone hammers

American National Standards Institute （ANSI), drop weight test

ANSI/ASTM E208:1995 Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
ANSI/ASTM D2444:1999 Test Method For Determination Of The Impact Resistance Of Thermoplastic Pipe And Fittings By Means Of A Tup Falling Weight
ANSI/ASTM D4495:2012 Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight

ES-UNE, drop weight test

UNE 41250-3:2016 Test methods for measurement of pavement deflection. Part 3: Falling weight deflectometer
UNE-EN ISO 13802:2016 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing (ISO 13802:2015, Corrected version 2016-04-01)
UNE-EN ISO 14556:2016 Metallic materials - Charpy V-notch pendulum impact test - Instrumented test method (ISO 14556:2015)
UNE-EN 12600:2003 ERRATUM:2011 Glass in building - Pendulum test - Impact test method and classification for flat glass.

The American Road & Transportation Builders Association, drop weight test

AASHTO T 99-2001 Standard Method of Test for Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop
AASHTO T 180-2001 Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop
AASHTO T 99-2010 Standard Method of Test for Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop
AASHTO T 99-2015 Standard Method of Test for Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop
AASHTO T 99-2021 Standard Method of Test for Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop
AASHTO T 180-2010 Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop
AASHTO T 180-2015 Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop
AASHTO T 180-2018 Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop
AASHTO T 180-2021 Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop

IT-UNI, drop weight test

UNI 7558-1976

Military Standard of the People's Republic of China-General Armament Department, drop weight test

GJB 5309.37-2004 Test methods for pyrotechnics Part 37: Hammer test

International Electrotechnical Commission (IEC), drop weight test

IEC PAS 62050:2004 Board level drop test method of components for handheld electronic products
IEC 60068-2-62:1991 Environmental testing; part 2: test methods; test Ef: impact, pendulum hammer
IEC 60068-2-63:1991 Environmental testing; part 2: test methods; test Eg: impact, spring hammer
IEC 60068-2-75:1997 Environmental testing - Part 2: Tests - Test Eh: Hammer tests
IEC 61897:1998 Overhead lines - Requirements and tests for Stockbridge type aeolian vibration dampers
IEC 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
IEC 60749-37:2008 Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer

European Committee for Standardization (CEN), drop weight test

EN ISO 148-1:2010 Metallic materials - Charpy pendulum impact test - Part 1: Test method
EN ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011)
EN ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter
EN 10045-2:1992 Metallic Materials - Charpy Impact Test - Part 2: Verification of the Testing Machine (Pendulum Impact)
EN 22244:1992 Packaging - Complete, Filled Transport Packages - Horizontal Impact Tests (Horizontal or Inclined Plane Test - Pendulum Test) (ISO 2244: 1985)
EN 14231:2003 Natural stone test methods - Determination of the slip resistance by means of the pendulum tester
prEN ISO 13802 rev Plastics — Verification of pendulum impact-testing machines — Charpy, Izod and tensile impact-testing
EN ISO 14556:2023 Metallic materials - Charpy V-notch pendulum impact test - Instrumented test method (ISO 14556:2023)
EN ISO 148-1:2016 Metallic materials - Charpy pendulum impact test - Part 1: Test method
EN ISO 13802:2015 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing (ISO 13802:2015, Corrected version 2016-04-01)
EN ISO 148-3:2016 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
EN ISO 148-2:2016 Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines (ISO 148-2:2016)
EN 10054-2:1992 Metallic Materials - Charpy Impact Test - Part 2: Verification of the Testing Machine (Pendulum Impact)
FprEN ISO 14556 Metallic materials - Charpy V-notch pendulum impact test - Instrumented test method (ISO/FDIS 14556:2023)
EN ISO 179-2:2020 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:2020)
EN ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010)
EN ISO 14556:2015 Metallic materials - Charpy Vnotch pendulum impact test - Instrumented test method
EN 13036-4:2003 Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface - The pendulum test
EN 13588:2017 Bitumen and bituminous binders - Determination of cohesion of bituminous binders with pendulum test

SE-SIS, drop weight test

SIS 11 23 50 E-1974 Slagprovning med U-provstav i Charpy-hejare
SIS SS-EN 10 045-1-1990 Metallic materials — Charpy impact test — Part 1: Test method
SIS 11 03 21-1966 Calibration of pendulum impact testing machines Charpy
SIS 11 03 20-1966 Calibration of pendulum impact testing machines Charpy
SIS 11 03 21 E-1974 Kontroll av Charpy-hejare. Verifiering med kontrollstavar

CEN - European Committee for Standardization, drop weight test

EN ISO 6272-1:2004 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test@ large-area indenter
EN ISO 6272-2:2006 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test@ small-area indenter
EN ISO 13802:2006 Plastics - Verification of pendulum impact-testing machines - Charpy@ Izod and tensile impact-testing
EN ISO 148-2:2008 Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines

WRC - Welding Research Council, drop weight test

BULLETIN 469-2002 CRACK-STARTER WELD BEAD DEPOSITION FOR ASTM E-208 DROP-WEIGHT TESTING: PART I) QUALIFICATION OF ELECTRODES FOR THE CRACK-STARTER BASED ON P-2 TYPE DROP-WIGHT SPECIMEN -ASTM E-208-95A; PART II) DETER

Professional Standard - Electricity, drop weight test

DL/T 1099-2009 Technical requirements and tests for damper
DL/T 1099-2021 Anti-vibration hammer technical conditions and test methods
DL/T 1299-2009 Anti-vibration hammer technical conditions and test methods

National Metrological Verification Regulations of the People's Republic of China, drop weight test

JJG 145-1982 Verification Regulation of Pendulum Impact Testing Machine
JJG 145-2007 Pendulum Impact Testing Machines
JJG 931-1998 Verification Regulation of Instruments for Measuring Monent of Pendulum of Impact Tester

Malaysia Standards, drop weight test

MS 133 Pt.E3-2000 Methods of test for paints and varnishes:Part E3:Resistance to impact(Falling-weight test)(First revision)(ISO 6272:1993,MOD)

Canadian General Standards Board （CGSB), drop weight test

CGSB 4.2 NO. 60-M89-CAN/CGSB-1989 Methodes Pour Epreuves Textiles Resistance Aux Accrocs - Essai A La Masse

Indonesia Standards, drop weight test

SNI 13-6581-2001 Determination for hardness of rocks by Schmidt hammer test

国家质量监督检验检疫总局, drop weight test

SN/T 4955-2017 Test method for non-marking of shoe soles - pendulum impact method

未注明发布机构, drop weight test

JIS Z 2242:2023 Method for Charpy pendulum impact test of metallic materials
BS EN ISO 13802:2015(2017) Plastics — Verification of pendulum impact - testing machines — Charpy, Izod and tensile impact - testing
BS 7932:2003(2008) Determination of the unpolished and polished pendulum test value of surfacing units
BS 131-4:1972(2000) Methods for notched bar tests — Part 4 : Calibration of Izod pendulum impact testing machines for metals

Professional Standard - Aviation, drop weight test

HB 8619-2021 Test method for drop weight impact damage resistance of aerospace polymer matrix composite laminates

ZA-SANS, drop weight test

SANS 148-1:2007 Metallic materials - Charpy pendulum impact test Part 1: Test method

AASHTO - American Association of State Highway and Transportation Officials, drop weight test

T 99-2001 Standard Method of Test for Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop
T 99-2015 Standard Method of Test for Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop
T 99-2010 Standard Method of Test for Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop
T 180-2017 Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop
T 180-2001 Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop
T180-1993 Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop
T 180-2015 Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop
T 180-2009 Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop
T99-1994 Standard Method of Test for the Moisture-Density Relations of Soils Using a 2.5 kg (5.5 lb) Rammer and a 305 mm (12 in.) Drop
T 180-2010 Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop
T 99-2017 Standard Method of Test for Moisture–Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop

YU-JUS, drop weight test

JUS Z.M8.015-1984 Packaging. Complete, filled transport packages. Horizonta! impact test (inclined plane test, pendulum test)

GOSTR, drop weight test

GOST 34373-2017 Plastics. Verification of pendulum impact-testing machines. Charpy, Izod and tensile impact-testing
GOST 9377-1981 Diamond indenters and hammers for metal and alloys hardness testing machines. Specifications

NL-NEN, drop weight test

NEN-EN 10045-2-1993 Metallic materials. Charpy impact test. Part 2: Verification of the testing machine (pendulum impact)

AT-ON, drop weight test

ONORM EN 22244-1993 Packaging - Complete, filled transport packages -Horizontal impact tests (horizontal or inclined plane test - Pendulum test) (ISO 2244:1985)
ONORM EN 10045-2-1993 Metalhc matenals - Charpy impact test - Part 2: Verif ication of the testing machine (pendulum impact)

未注明发布机构, drop weight test

JIS Z 2242:2023 Method for Charpy pendulum impact test of metallic materials
BS EN ISO 13802:2015(2017) Plastics — Verification of pendulum impact - testing machines — Charpy, Izod and tensile impact - testing
BS 7932:2003(2008) Determination of the unpolished and polished pendulum test value of surfacing units
BS 131-4:1972(2000) Methods for notched bar tests — Part 4 : Calibration of Izod pendulum impact testing machines for metals

PL-PKN, drop weight test

PN E08410-1992 Safety of hand-held motor-operated electric tools. Hammers. Particular requirements and tests

Aerospace, Security and Defence Industries Association of Europe (ASD), drop weight test

ASD-STAN PREN 2003-3-1998 Aerospace Series Steel Test Methods Part 3: Calibration of Pendulum Impact Machines (Edition P 1)