ZH
RU
ES
repeated shear test
repeated shear test, Total:497 items.
In the international standard classification, repeated shear test involves: Earthworks. Excavations. Foundation construction. Underground works, Reinforced plastics, Footwear, Rubber and plastics products, Plastics, Testing of metals, Wood, sawlogs and sawn timber, Welding, brazing and soldering, Elements of buildings, Fasteners, Medical equipment, Mechanical testing, Road engineering, Waxes, bituminous materials and other petroleum products, Hand-held tools, Wood-based panels, Products of the textile industry, Test conditions and procedures in general, Adhesives, Products of non-ferrous metals, Powder metallurgy, Textile fibres, Dentistry, Soil quality. Pedology, Woodworking equipment, Geology. Meteorology. Hydrology, Semi-manufactures of timber, Cellular materials, Materials for aerospace construction, Construction materials, TESTING, Farming and forestry, Raw materials for rubber and plastics, Mining equipment, Structure and structure elements, Iron and steel products, Paints and varnishes, Packaging materials and accessories, Ceramics, Materials for the reinforcement of composites, Electrical wires and cables, Surface treatment and coating, Structures of buildings, Coatings and related processes used in aerospace industry, Equipment for the chemical industry, Sports equipment and facilities, Road vehicles in general, Components for electrical equipment, Electrical and electronic testing, Cans. Tins. Tubes, Hydraulic fluids.
Professional Standard - Water Conservancy, repeated shear test
German Institute for Standardization, repeated shear test
- DIN SPEC 4885:2014 Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus; Text in German and English
- DIN EN ISO 22776:2005 Footwear - Test methods for accessories: Touch and close fasteners - Shear strength before and after repeated closing (ISO 22776:2004); German version EN ISO 22776:2004
- DIN 50162:1978-09 Testing of clad steels; determination of shear strength between cladding metal and parent metal in shear test
- DIN EN ISO 20337:2020-01 Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus (ISO 20337:2018); German version EN ISO 20337:2019
- DIN 8526:2016 Testing of soldered joints - Gap soldered joints, shear test, creep shear test
- DIN 8526:1977 Testing of Soldering Joints; Gap Soldered Joints, Shear Test, Creep Shear Test
- DIN 53294:1982-02 Testing of sandwiches; Shear test
- DIN ISO 5749:2006 Pliers and nippers - Diagonal cutting nippers - Dimensions and test values (ISO 5749:2004) English version of DIN ISO 5749:2006-09
- DIN 53294:1982 Testing of sandwiches; Shear test
- DIN ISO 5748:2006 Pliers and nippers - End cutting nippers - Dimensions and test values (ISO 5748:2004) English version of DIN ISO 5748:2006-09
- DIN 18137-3:2002 Soil, investigation and testing - Determination of shear strength - Part 3: Direct shear test
- DIN 50141:1982 Testing of metals; Shear test
- DIN EN 28749:1992 Determination of shear strength of pins (ISO 8749:1986); german version EN 28749:1992
- DIN EN ISO 14129:1998-02 Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain reponse, including the in-plane schear modulus and strength, by ± 45° tension test method (ISO 14129:1997); German version EN ISO 14129:1997
- DIN ISO 5744:2006 Pliers and nippers - Methods of test (ISO 5744:2004) English version of DIN ISO 5744:2006-09
- DIN EN ISO 14323:2006 Resistance spot welding and projection welds - Destructive testing of welds - Specimen dimensions and procedure for impact shear test and cross-tension testing (ISO 14323:2006); English version of DIN EN ISO 14323:2006-07
- DIN 53399-2:1982 Testing of reinforced plastics; shear test on plane specimens
- DIN ISO 9656:2006 Pliers and nippers for electronics - Test methods (ISO 9656:2004) English version of DIN ISO 9656:2006-09
- DIN 50162:1978 Testing of clad steels; determination of shear strength between cladding metal and parent metal in shear test
- DIN 18137-2:1990 Soil, testing procedures and testing equipment; determination of shear strength; triaxial test
- DIN ISO/TS 17892-10:2005 Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests (ISO/TS 17892-10:2004); German version CEN ISO/TS 17892-10:2004
- DIN CEN/TS 12697-51:2017-10*DIN SPEC 18099:2017-10 Bituminous mixtures - Test methods - Part 51: Surface shear strength test; German version CEN/TS 12697-51:2017
- DIN 65466:1996 Aerospace - Fibre reinforced plastics - Testing of unidirectional laminates; Determination of shear strength and shear modulus in tension
- DIN ISO 9649:1993 Metallic materials; wire; reverse torsion test; identical with ISO 9649:1990
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, repeated shear test
- GB/T 3903.21-2008 Footwear.Test methods for accessories: Touch and close fasteners.Shear strength before and after repeated closing
- GB/T 28889-2012 Test method for in-plane shear properties of composite materials
- GB/T 3355-2014 Test method for in-plane shear response of polymer matrix composite materials
- GB/T 13683-1992 Pins and grooved pins--Shear test
- GB/T 30969-2014 Test method for short-beam shear strength of polymer matrix composite materials
- GB/T 32377-2015 Dynamic punch-shear properties test method for fibre reinforced composites
- GB/T 30970-2014 Test method for the shear properties of polymer matrix composite materials by V-notched beam method
- GB/T 4934.2-2008 Instrument for soil test.Shear apparatus.Part 2: Field vane shear apparatus
- GB/T 6291-1999 Pliers and nippers--Methods of test
- GB/T 6291-2013 Pliers and nippers.Methods of test
- GB/T 6328-1999 Adhesives--Test method for shear impact strength of adhesive bonds
- GB/T 15598-1995 Testing methods for shear strength of plastics by punch tool
- GB/T 13096.4-1991 Test method for apparent horizontal shear strength of pultruded glass fiber reinforced plastic rods by the short-beam method
- GB/T 3355-1982 Test method for longitudinal transverse shear(L-T shear )properties of fiber reinforced plastics
- GB/T 15111-1994 Test method for shear tensile fatigue of spot welded joints
- GB/T 3355-2005 Test method for longitudinal transverse shear(L-T shear)properties of fiber reinforced plastics
- GB/T 10007-2008 Rigid cellular plastics.Determination of shear strength
- GB/T 10007-1988 Cellular plastics--Determination of shear strength of rigid materials
- GB/T 4909.5-1985 Test methods for bare wires--Bend test--Reverse bend test
- GB/T 4934.1-2008 Instrument for soil test.Shear apparatus.Part 1: Strain-controlled direct shear apparatus
- GB/T 1455-1988 Test method for shear properties of sandwich constructions or cores
- GB/T 6400-2007 Metallic materiaks-Shear test method for wires and rivets
- GB/T 1455-2005 Test method for shear properties of sandwich constructions or cores
- GB/T 1461-1988 Test method for interlaminar shear strength of ring of filament-winding reinforced plastics
- GB/T 6400-1986 High temperature shear test method for metals wires and rivets
- GB/T 1450.1-2005 Fibre-reinforced plastic composites-Determination of interlaminar shear strength
- GB 6400-1986 High temperature shear test method for metals wires and rivets
- GB/T 29739-2013 Test method of resistance to repeat opening and closing for windows and doors
- GB/T 14903-1994 Testing method for torsional shear strength of dodel joint by inorganic adhesives
- GB/T 11177-1989 Testing method for compressive shear strength of dowel joint by inorganic adhesives
- GB/T 1450.2-2005 Fibre-reinforced plastic composites-Determination of the punch-type shear strength
British Standards Institution (BSI), repeated shear test
- BS EN ISO 14129:1998 Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength by the <+OR-> 45 ° tension test method
- BS EN ISO 20337:2019 Fibre-reinforced plastic composites. Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
- BS EN 28749:1992 Pins and grooved pins. Shear test
- BS EN ISO 22776:2004 Footwear. Test method for accessories. Touch and close fasteners. Shear strength before and after repeated closing
- BS EN ISO 14323:2006 Resistance spot welding and projection welds - Destructive testing of welds - Specimen dimensions and procedure for impact shear test and cross-tension testing
- BS EN ISO 22776:2005 Footwear - Test method for accessories - Touch and close fasteners - Shear strength before and after repeated closing
- BS ISO 5744:2004 Pliers and nippers - Methods of test
- BS ISO 5748:2004 Pliers and nippers - End cutting nippers - Dimensions and test values
- BS ISO 9656:2004 Pliers and nippers for electronics - Test methods
- BS EN ISO 29022:2013 Dentistry. Adhesion. Notched-edge shear bond strength test
- BS ISO 19927:2018 Fibre-reinforced plastic composites. Determination of interlaminar strength and modulus by double beam shear test
- BS EN ISO 9653:2000 Adhesives - Test method for shear strength of adhesive bonds
- BS EN 2830:1993 Adhesion test for metallic coatings by shearing action
- BS ISO 9649:2016 Metallic materials. Wire. Reverse torsion test
- BS 2782-3 Methods 340A and 340B:1978 Methods of testing plastics - Mechanical properties - Determination of shear strength of moulding material - Determination of shear strength of sheet material
- BS ISO 9343:2004 Pliers and nippers - Slip joint pliers - Dimensions and test values
- BS ISO 5745:2004 Pliers and nippers - Pliers for gripping and manipulating - Dimensions and test values
- BS ISO 5749:2004 Pliers and nippers - Diagonal cutting nippers - Dimensions and test values
- BS ISO 8976:2004 Pliers and nippers - Multiple slip joint pliers - Dimensions and test values
- BS EN ISO 12957-1:2005 Geotextiles - Determination of friction characteristics - Direct shear test
- BS EN 1191:2000 Windows and doors - Resistance to repeated opening and closing - Test method
- BS EN 1191:2012 Windows and doors. Resistance to repeated opening and closing. Testmethod
- BS 903-A14:1992 Physical testing of rubber - Method for determination of modulus in shear or adhesion to rigid plates - Quadruple shear method
- BS EN 16285:2013 Packaging. Flexible aluminium tubes. Test method to measure the deformation of the aluminium tube body (Guillotine test)
American Society for Testing and Materials (ASTM), repeated shear test
- ASTM D7078/D7078M-05 Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
- ASTM D7078/D7078M-05 adjunct Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
- ASTM D7078/D7078M-19 Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
- ASTM D7078/D7078M-20 Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
- ASTM D7078/D7078M-20e1 Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
- ASTM D707-15 Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds (CAB)
- ASTM D7078/D7078M-12 Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
- ASTM D6128-00 Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Cell
- ASTM D6128-97 Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Cell
- ASTM D6128-22 Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Tester
- ASTM D6128-06 Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Cell
- ASTM E2126-07 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Walls for Buildings
- ASTM D7312-07 Standard Test Method for Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST)
- ASTM D7312-10 Standard Test Method for Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST)
- ASTM D6128-14 Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Cell
- ASTM D4255/D4255M-01 Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
- ASTM D4255/D4255M-83(1994)e1 Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
- ASTM D4255/D4255M-20e1 Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
- ASTM D7552-22 Standard Test Method for Determining the Complex Shear Modulus (G*) of Asphalt Mixtures Using Dynamic Shear Rheometer
- ASTM D4255/D4255M-15 Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
- ASTM D4255/D4255M-15a Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
- ASTM D2718-00(2011)e1 Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)
- ASTM D2718-18 Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)
- ASTM D6128-16 Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Tester
- ASTM E2126-05 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Walls for Buildings
- ASTM D6773-02 Standard Shear Test Method for Bulk Solids Using the Schulze Ring Shear Tester
- ASTM D6773-08 Standard Shear Test Method for Bulk Solids Using the Schulze Ring Shear Tester
- ASTM D4255/D4255M-20 Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
- ASTM D5379/D5379M-05 Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method
- ASTM D5379/D5379M-98 Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method
- ASTM D5379/D5379M-19e1 Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method
- ASTM D5379/D5379M-19 Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method
- ASTM D5379/D5379M-12 Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method
- ASTM D537-85(1997) Standard test method for determination of shear properties of composite materials by the V-notched beam method
- ASTM E2126-01 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Framed Walls for Buildings
- ASTM E2126-02a Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Framed Walls for Buildings
- ASTM E2126-02 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Framed Walls for Buildings
- ASTM B769-06 Standard Test Method for Shear Testing of Aluminum Alloys
- ASTM D6682-01 Standard Test Method for Measuring the Shear Stresses of Powders Using the Peschl Rotational Split Level Shear Tester
- ASTM D6682-01(2006) Standard Test Method for Measuring Shear Stresses of Powders Using Peschl Rotational Split Level Shear Tester
- ASTM D6682-08 Standard Test Method for Measuring Shear Stresses of Powders Using Peschl Rotational Split Level Shear Tester
- ASTM D6467-21e1 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Fine-Grained Soils
- ASTM B769-94(2000) Standard Test Method for Shear Testing of Aluminum Alloys
- ASTM B769-11 Standard Test Method for Shear Testing of Aluminum Alloys
- ASTM B769-11(2021) Standard Test Method for Shear Testing of Aluminum Alloys
- ASTM B769-11(2016) Standard Test Method for Shear Testing of Aluminum Alloys
- ASTM D2718-00(2011) Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)
- ASTM F1269-89(2001) Test Methods for Destructive Shear Testing of Ball Bonds
- ASTM F1269-89(1995)e1 Test Methods for Destructive Shear Testing of Ball Bonds
- ASTM D7552-09(2014) Standard Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer
- ASTM D2718-00(2006) Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)
- ASTM D2718-00 Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)
- ASTM D2718-00e1 Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)
- ASTM D3115-95 Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear
- ASTM D6467-13e1 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils
- ASTM D7891-15 Standard Test Method for Shear Testing of Powders Using the Freeman Technology FT4 Powder Rheometer Shear Cell
- ASTM D7617/D7617M-11(2017) Standard Test Method for Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars
- ASTM D3115-95(2005) Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear
- ASTM D7552-09 Standard Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer
- ASTM B831-05 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
- ASTM B831-93(1998) Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
- ASTM D2573-08 Standard Test Method for Field Vane Shear Test in Cohesive Soil
- ASTM B831-11 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
- ASTM B831-19 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
- ASTM B831-22 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
- ASTM B831-14 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
- ASTM F1269-06 Test Methods for Destructive Shear Testing of Ball Bonds
- ASTM D5448/D5448M-93 Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders
- ASTM D5448/D5448M-93(2000) Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders
- ASTM B769-07 Standard Test Method for Shear Testing of Aluminum Alloys
- ASTM F1362-97(2003) Standard Test Method for Shear Strength and Shear Modulus of Aerospace Glazing Interlayer Materials
- ASTM F1362-18 Standard Test Method for Shear Strength and Shear Modulus of Aerospace Glazing Interlayer Materials
- ASTM F1362-18(2023) Standard Test Method for Shear Strength and Shear Modulus of Aerospace Glazing Interlayer Materials
- ASTM F1658-95 Test Method for Shear Testing of Calcium Phosphate Coatings (Withdrawn 2000)
- ASTM F1269-13 Standard Test Methods for Destructive Shear Testing of Ball Bonds
- ASTM D3170-03 Standard Test Method for Chipping Resistance of Coatings
- ASTM E143-01 Standard Test Method for Shear Modulus at Room Temperature
- ASTM D2719-89(1994)e1 Standard Test Methods for Structural Panels in Shear Through-the-Thickness
- ASTM E143-02 Standard Test Method for Shear Modulus at Room Temperature
- ASTM E143-02(2008) Standard Test Method for Shear Modulus at Room Temperature
- ASTM D3170-87(1996)e1 Standard Test Method for Chipping Resistance of Coatings
- ASTM C1425-13 Standard Test Method for Interlaminar Shear Strength of 1–D and 2–D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures
- ASTM D2719-13 Standard Test Methods for Structural Panels in Shear Through-the-Thickness
- ASTM D8337/D8337M-21 Standard Test Method for Evaluation of Bond Properties of FRP Composite Applied to Concrete Substrate using Single-Lap Shear Test
- ASTM D3115-95(2000) Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear
- ASTM D3115-95(2009) Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear
- ASTM D3115-95(2014) Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear
- ASTM D4255/D4255M-01(2007) Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
- ASTM D5448/D5448M-22 Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders
- ASTM D5448/D5448M-16 Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders
- ASTM D5448/D5448M-11 Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders
- ASTM D5450/D5450M-11 Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders
- ASTM D5450/D5450M-12 Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders
- ASTM D3080-03 Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions
- ASTM F1160-14(2017)e1 Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings
- ASTM C273/C273M-19 Standard Test Method for Shear Properties of Sandwich Core Materials
- ASTM D3044-94 Standard Test Method for Shear Modulus of Wood-Based Structural Panels
- ASTM D5618-94(2000) Standard Test Method for Measurement of Barnacle Adhesion Strength in Shear
- ASTM D3654/D3654M-00e1 Standard Test Methods for Shear Adhesion of Pressure-Sensitive Tapes
- ASTM C394-00 Standard Test Method for Shear Fatigue of Sandwich Core Materials
- ASTM C273/C273M-07 Standard Test Method for Shear Properties of Sandwich Core Materials
- ASTM C273/C273M-07a Standard Test Method for Shear Properties of Sandwich Core Materials
- ASTM C273-00e1 Standard Test Method for Shear Properties of Sandwich Core Materials
- ASTM C273/C273M-06 Standard Test Method for Shear Properties of Sandwich Core Materials
- ASTM D3044-94(2000) Standard Test Method for Shear Modulus of Wood-Based Structural Panels
- ASTM D3044-94(2011) Standard Test Method for Shear Modulus of Wood-Based Structural Panels
- ASTM C273/C273M-18 Standard Test Method for Shear Properties of Sandwich Core Materials
- ASTM C273/C273M-11 Standard Test Method for Shear Properties of Sandwich Core Materials
- ASTM C273/C273M-20 Standard Test Method for Shear Properties of Sandwich Core Materials
- ASTM C394/C394M-13 Standard Test Method for Shear Fatigue of Sandwich Core Materials
- ASTM C273/C273M-16 Standard Test Method for Shear Properties of Sandwich Core Materials
- ASTM C394/C394M-16 Standard Test Method for Shear Fatigue of Sandwich Core Materials
- ASTM D2573-01e1 Standard Test Method for Field Vane Shear Test in Cohesive Soil
- ASTM D2573/D2573M-15e1 Standard Test Method for Field Vane Shear Test in Saturated Fine-Grained Soils
- ASTM D2573/D2573M-18 Standard Test Method for Field Vane Shear Test in Saturated Fine-Grained Soils
- ASTM D3518/D3518M-94(2007) Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a 177;45176; Laminate
- ASTM D8295-19 Standard Test Method for Determination of Shear Wave Velocity and Initial Shear Modulus in Soil Specimens using Bender Elements
- ASTM D6467-99 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils
- ASTM D6467-06 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils
- ASTM D6467-06a Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils
- ASTM D6467-21 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Fine-Grained Soils
- ASTM D7405-10a Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
- ASTM D3044-94(2006) Standard Test Method for Shear Modulus of Wood-Based Structural Panels
- ASTM C394-00(2008) Standard Test Method for Shear Fatigue of Sandwich Core Materials
- ASTM D2719-19 Standard Test Methods for Wood Structural Panels in Shear Through-the-Thickness
- ASTM D3044-16(2023) Standard Test Method for Shear Modulus of Wood-Based Structural Panels
- ASTM E143-13 Standard Test Method for Shear Modulus at Room Temperature
- ASTM F1160-14 Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings
- ASTM F1044-05 Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings
- ASTM F1044-99 Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings
- ASTM D2573-94 Standard Test Method for Field Vane Shear Test in Cohesive Soil
- ASTM D2573-01(2007) Standard Test Method for Field Vane Shear Test in Cohesive Soil
- ASTM F1044-05(2011)e1 Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings
- ASTM F1044-05(2017)e1 Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings
- ASTM F1269-13(2018) Standard Test Methods for Destructive Shear Testing of Ball Bonds
- ASTM D6773-22 Standard Test Method for Bulk Solids Using Schulze Ring Shear Tester
- ASTM D3518/D3518M-13 Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a plusmn;45deg; Laminate
- ASTM D5448/D5448M-93(2006) Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders
- ASTM D5321-92(1997) Standard Test Method for Determining the Coefficient of Soil and Geosynthetic or Geosynthetic and Geosynthetic Friction by the Direct Shear Method
- ASTM D5321/D5321M-20 Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear
- ASTM D5321/D5321M-21 Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear
- ASTM D5321/D5321M-19 Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear
- ASTM D5321/D5321M-17 Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear
- ASTM D7608-18e1 Standard Test Method for Torsional Ring Shear Test to Measure Drained Fully Softened Shear Strength and Stress Dependent Strength Envelope of Fine-Grained Soils
- ASTM D6467-13 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils
- ASTM D4498-00 Standard Test Method for Heat-Fail Temperature in Shear of Hot Melt Adhesives
- ASTM D732-09 Standard Test Method for Shear Strength of Plastics by Punch Tool
- ASTM D3654/D3654M-06 Standard Test Methods for Shear Adhesion of Pressure-Sensitive Tapes
- ASTM D3654/D3654M-06(2011) Standard Test Methods for Shear Adhesion of Pressure-Sensitive Tapes
- ASTM D5621-19 Standard Test Method for Sonic Shear Stability of Hydraulic Fluids
- ASTM D732-17 Standard Test Method for Shear Strength of Plastics by Punch Tool
Association Francaise de Normalisation, repeated shear test
- NF G62-605*NF EN ISO 22776:2005 Footwear - Test methods for accessories : touch and close fasteners - Shear strength before and after repeating closing
- NF T57-401*NF EN ISO 20337:2019 Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
- NF EN ISO 20337:2019 Composites plastiques renforcés de fibres - Méthode d'essai de cisaillement à l'aide d'un châssis de cisaillement pour la détermination de la contrainte de cisaillement/déformation au cisaillement dans le plan et du module de cisaillement
- NF P94-071-1:1994 Soil investigation and testing. Direct shear test with shearbox apparatus. Part 1 : direct shear.
- NF B51-012:1942 Wood. Shear test.
- NF B51-012:2019 Timber - Shear Test
- NF P20-521:1983 Doors. Shearing test.
- NF E25-769*NF EN 28749:1992 Pins and grooved pins. Shear test.
- NF T57-402*NF EN ISO 14129:1998 Fibre-reinforced plastic composites. Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus over minus 45 degrees tension test method.
- NF P94-071-2:1994 Sols : reconnaissance et essais - Essai de cisaillement rectiligne à la boîte - Partie 2 : cisaillement alterné.
- NF A89-572:2006 Resistance spot welding and projection welds - Destructive testing of welds - Specimen dimensions and procedure for impact shear test and cross tension testing.
- NF C73-599*NF EN 50699:2020 Recurrent Tests of Electrical Equipment
- NF E73-122*NF ISO 5744:2004 Pliers and nippers - Methods of test
- NF B51-032:1981 Laminated bonded wood- Test of compression shear.
- NF E73-104*NF ISO 5748:2004 Pliers and nippers - End cutting nippers - Dimensions and test values
- NF E73-106*NF ISO 5747:2015 Pliers and nippers - Lever assisted side cutting pliers, end and diagonal cutting nippers - Dimensions and test values
- NF T56-118:1980 Rigid cellular products with rubber or plastic base. Shearing test. Determination of apparent shearing coefficient.
- NF E73-118*NF ISO 9656:2004 Pliers and nippers for electronics - Test methods
- NF P21-372:1995 Glued laminated timber. Shear test of glue lines.
- NF S91-266*NF EN ISO 29022:2013 Dentistry - Adhesion - Notched-edge shear bond strength test
- NF A03-010:1986 Metallic materials. Wire. Reverse bend test.
- NF EN ISO 14130:1998 Composites plastiques renforcés de fibres - Détermination de la résistance au cisaillement interlaminaire apparent par essai de flexion sur appuis rapprochés
- NF E73-109:2004 Pliers and nippers - Slip joint pliers - Dimensions and test values.
- NF E73-108:2004 Pliers and nippers - Multiple slip joint pliers - Dimensions and test values.
- NF E73-102*NF ISO 5745:2004 Pliers and nippers - Pliers for gripping and manipulating - Dimension and test values
- NF E73-105*NF ISO 5749:2004 Pliers and nippers - Diagonal cutting nippers - Dimensions and test values
- NF E73-109:1988 Pliers and nippers. Slip joint pliers. Dimensions and test values.
- NF H34-085:2013 Packaging - Flexible aluminium tubes - Test method to measure the deformation of the aluminium tube body (Guillotine test)
International Organization for Standardization (ISO), repeated shear test
- ISO 22776:2004 Footwear - Test methods for accessories: Touch and close fasteners - Shear strength before and after repeated closing
- ISO 20337:2018 Fibre-reinforced plastic composites — Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
- ISO 8749:1986 Pins and grooved pins; Shear test
- ISO 14323:2006 Resistance spot welding and projection welds - Destructive testing of welds - Specimen dimensions and procedure for impact shear test and cross-tension testing
- ISO 14323:2015 Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for impact tensile shear test and cross-tension testing of resistance spot and embossed projection welds
- ISO 5744:2004 Pliers and nippers - Methods of test
- ISO 5744:1988 Pliers and nippers - Methods of test
- ISO 5748:2004 Pliers and nippers - End cutting nippers - Dimensions and test values
- ISO 5748:1988 Pliers and nippers - End cutting nippers - Dimensions and test values
- ISO 9379:1989 Doorsets; repeated opening and closing test
- ISO 9380:1990 Doorsets; Repeated torsion test
- ISO 5747:1995 Pliers and nippers - Lever assisted side cutting pliers, end and diagonal cutting nippers - Dimensions and test values
- ISO 9656:2004 Pliers and nippers for electronics - Test methods
- ISO 9656:1989 Pliers and nippers for electronics - Test methods
- ISO 29022:2013 Dentistry.Adhesion.Notched-edge shear bond strength test
- ISO 19927:2018 Fibre-reinforced plastic composites - Determination of interlaminar strength and modulus by double beam shear test
- ISO 9649:2016 Metallic materials - Wire - Reverse torsion test
- ISO 7801:1984 Metallic materials; Wire; Reverse bend test
- ISO 9649:1990 Metallic materials; wire; reverse torsion test
- ISO 8976:2004 Pliers and nippers - Multiple slip joint pliers - Dimensions and test values
- ISO 9343:2004 Pliers and nippers - Slip joint pliers - Dimensions and test values
- ISO 5745:2004 Pliers and nippers - Pliers for gripping and manipulating - Dimensions and test values
- ISO 5749:2004 Pliers and nippers - Diagonal cutting nippers - Dimensions and test values
- ISO 5749:1988 Pliers and nippers - Diagonal cutting nippers - Dimensions and test values
- ISO 5745:1988 Pliers and nippers - Pliers for gripping and manipulating - Dimensions and test values
- ISO 9343:1988 Pliers and nippers - Slip joint pliers - Dimensions and test values
- ISO 8976:1988 Pliers and nippers - Multiple slip joint pliers - Dimensions and test values
- ISO 8976:2021 Pliers and nippers - Multiple slip joint pliers - Dimensions and test values
- ISO/R 2101:1971 Aluminium and aluminium alloys — Shear test for rivet wire and rivets
- ISO 8274:2005 Windows and doors - Resistance to repeated opening and closing - Test method
Korean Agency for Technology and Standards (KATS), repeated shear test
- KS M ISO 22776:2005 Footwear－Test methods for accessories：Touch and close fasteners－Shear strength before and after repeated closing
- KS M ISO 14129:2011 Fibre-reinforced plastic composites-Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the ±45° tension test method
- KS M ISO 14129:2016 Fibre-reinforced plastic composites－Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the ±45° tension test method
- KS M ISO 22776-2005(2020) Footwear－Test methods for accessories：Touch and close fasteners－Shear strength before and after repeated closing
- KS P 1002-2006 Cut and durability test methods for dressing scissors
- KS P 1002-1980 Cut and durability test methods for dressing scissors
- KS F 2209-1994 Method of Shear Test for Wood
- KS F 2209-2020 Method of shear test for wood
- KS P 1002-2006(2016) Cut and durability test methods for dressing scissors
- KS M ISO 14129-2016(2021) Fibre-reinforced plastic composites－Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the ±45° tension test method
- KS B 0851-2006 Specimen dimensions and procedure for shear testingresistance spot and embossed projection welded joints
- KS M 3019-2008 Testing methods for shear strength of plastics by punch tool
- KS B 0562-2016 Methods of double shear test for fastner
- KS M 3019-1982 Testing methods for shear strength of plastics by punch tool
- KS B ISO 14323:2007 Resistance spot welding and projection welds-Destructive testing of welds-Specimen dimensions and procedure for impact sheaar test and cross-tension testing
- KS B ISO 14323:2014 Resistance spot welding and projection welds－Destructive testing of welds－Specimen dimensions and procedure for impact sheaar test and cross－tension testing
- KS F 2632-2007(2017) Doorsets－Repeated opening and closing test
- KS F 2632-1997 Doorsets－Repeated opening and closing test
- KS F 2154-2022 Method of shear(racking) resistance test for light-frame wood shear walls
- KS B 0842-2016 Method of shear test for we1ded side fillet joint
- KS B 0561-2016 Methods of single shear test for fastener
- KS B 0842-1985 Method of shear test for we1ded side fillet joint
- KS B ISO 5747:2002 Pliers and nippers－Lever assisted side cutting pliers, end and diagonal cutting nippers－Dimensions and test values
- KS M 3721-2008 Testing methods for strength properties of adhesives in shear by compression loading
- KS M 3729-2011 Testing methods for impact shear strength of adhesive bonds
- KS P 1001-2006(2016) Cut and durability test methods for surgical knives
- KS B 0842-2021 Method of shear test for welded side fillet joint
- KS M 3721-1987 Testing methods for strength properties of adhesives in shear by compression loading
- KS P 1001-1981 Cut and durability test methods for surgical knives
- KS F 2632-2007(2022) Doorsets－Repeated opening and closing test
- KS P ISO 7741:2008 Instruments for surgery－Scissors and shears－General requirements and test methods
- KS B ISO 5187-2016(2021) Methods of tension and shear tests for brazed joint
- KS F 2342-2022 Test method for field vane shear in cohesive soil
- KS F 2342-2016 Standard test method for field vane shear in cohesive soil
- KS F 2343-2022 Test method for direct shear test of soils under consolidated drained conditions
- KS M 3714-1992(1997) TESTING METHODS FOR IN-PLANE SHEAR PROPERTIES OF CARBON FIBER REINFORCED PLASTICS BY +-45 TENSION METHOD AND TWO PAIRS OF RAILS METHOD
- KS M 3721-2008(2013) Testing methods for strength properties of adhesives in shear by compression loading
- KS B ISO 9649:2002 Metallic materials-Wire-Reverse torsion test
- KS B ISO 9649:2015 Metallic materials－Wire－Reverse torsion test
- KS M ISO 9653-2007(2022) Adhesives－Test method for shear impact strength of adhesive bonds
European Committee for Standardization (CEN), repeated shear test
- EN ISO 20337:2019 Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus (ISO 20337:2018)
- EN 28749:1992 Pins and grooved pins - Shear test (ISO 8749:1986)
- EN 326-1:1994 Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results
- EN ISO 14129:1997 Fibre-Reinforced Plastic Composites - Determination of the in-Plane Shear Stress/Shear Strain Response, Including the in-Plane Shear Modulus and Strength, by the Plus or Minus 45 Degree Tension Test Method ISO 14129:1997
- EN ISO 14323:2006 Resistance spot welding and projection welds - Destructive testing of welds - Specimen dimensions and procedure for impact shear test and cross-tension testing ISO 14323:2006
- EN ISO 29022:2013 Dentistry - Adhesion - Notched-edge shear bond strength test
- EN ISO 22776:2004 Footwear - Test methods for accessories: Touch and close fasteners - Shear strength before and after repeated closing
- EN 14869-2:2011 Structural adhesives - Determination of shear behaviour of structural bonds - Part 2: Thick adherends shear test
- PD CEN/TS 12697-51:2017 Bituminous mixtures - Test methods - Part 51: Surface shear strength test
- CEN/TS 12697-51:2017 Bituminous mixtures - Test methods - Part 51: Surface shear strength test
CZ-CSN, repeated shear test
GOSTR, repeated shear test
- GOST R 57968-2017 Polymer composites. Test method of samples for shearing
- GOST R 57753-2017 Polymer composites. Test method for determination of apparent interlaminar shear strength of pultruded glass composite rods
- GOST 12248.1-2020 Soils. Determination of strength parameters by shear strength testing
RU-GOST R, repeated shear test
- GOST R 50578-1993 Polymer composites. Plate distortion shear test
- GOST R 50076-1992 Pins and grooved pins. Shear test
- GOST R 57207-2016 Polymer composites. Test method for shear properties of V-notched test samples
- GOST R 57750-2017 Polymer composites. Test method for creep properties of adhesives in shear
- GOST R 59423-2021 Dentistry. Restorative materials. Shear test methods for determining the strength of adhesive joints
- GOST R 57049-2016 Polymer composites. Test method for shear fatigue of sandwich core materials
- GOST 31557-2012 Shearers. General technical requirements. Test methods
- GOST R 57834-2017 Polymer composites. Standard test method for shear strength of single-lap-joint adhesively bonded
- GOST R 57733-2017 Polymer composites. Test method for determination of inplane shear properties of hoop wound samples
- GOST 1579-1993 Wire. Bend test method
- GOST 33685-2015 Polymer composites. Test method for determination of the interlaminar fracture toughness under shear GIIC
- GOST R 57744-2017 Ceramic composites. Determination of the interlaminar shear strength at ambient temperature by the compression of double-notched test pieces and by the Iosipescu test
国家市场监督管理总局、中国国家标准化管理委员会, repeated shear test
- GB/T 40388-2021 Test method for shear strength of C/C composites
- GB/T 41498-2022 Fibre-reinforced plastic composites—Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
- GB/T 37745-2019 Static and cyclic lateral load test methods for timber structure shear walls
- GB/T 6328-2021 Test method for shear impact strength of adhesive bonds
- GB/T 1455-2022 Test method for shear properties of sandwich constructions or cores
Professional Standard - Aviation, repeated shear test
- HB 7237-1995 In-plane shear test method for composite laminates
- HB 6736-1993 Method of Shear Test for Sheet Metal
- HB 5213-1982 High Temperature Shear Test Method for Metals
- HB 5148-1980 Rivet, wire shear test method
- HB 5148-1996 Rivet, wire shear test method
- HB 7237-2021 Test method for shear properties of multi-directional laminates of polymer matrix composites for aerospace applications
- HB 5474-1991 Test Method for Shear Strength of Thermal Spray Coatings
- HB 5164-1981 Test method for tensile shear strength of metal bonded joints
- HB 5250-1993 Test method for shear strength of room temperature vulcanizing sealants
- HB 5314-1993 Test method for static shear strength of anaerobic adhesives used in aviation
- HB 5175-1996 Metal wire repeated bending test method
- HB 5175-1981 Metal wire repeated bending test method
GM North America, repeated shear test
Danish Standards Foundation, repeated shear test
- DS/EN ISO 22776:2005 Footwear - Test methods for accessories: Touch and close fasteners - Shear strength before and after repeated closing
- DS/EN 28 749:1992 Pins and grooved pins - Shear test
- DS/EN 28749:1992 Pins and grooved pins. Shear test
- DS/ISO 8749:1988 Pins and grooved pins. Shear test
- DS/EN ISO 14129:1998 Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the +/- 45º tension test method
- DS/EN 1191:2013 Windows and doors - Resistance to repeated opening and closing - Test method
- DS/EN 14869-2:2011 Structural adhesives - Determination of shear behaviour of structural bonds - Part 2: Thick adherends shear test
- DS/EN ISO 29022:2013 Dentistry - Adhesion - Notched-edge shear bond strength test
- DS/EN 12615:1999 Products and systems for the protection and repair of concrete structures - Test methods - Determination of slant shear strength
- DS/EN ISO 9653:2000 Adhesives - Test method for shear impact strength of adhesive bonds
ES-UNE, repeated shear test
- UNE-EN ISO 20337:2020 Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus (ISO 20337:2018)
- ESPECIFICACION UNE 0074:2023 Plastic materials. Shear test method by means of tension-compression on cruciform specimen
Professional Standard - Chemical Industry, repeated shear test
SE-SIS, repeated shear test
- SIS SS 02 71 27-1991 Geotechnical tests — Shear strength — Direct simple shear test, CU- and CD-tests — Cohesive soil
- SIS SS 02 71 25-1991 Geotechnical tests — Shear strength — Fall-cone test — Cohesive soil
CH-SNV, repeated shear test
PL-PKN, repeated shear test
- PN M69782-1974 Shearing strength test of spot weld
- PN B04482-1989 Apparatus lor laboratory shear strcngith tcsting of soils willi de lined shear surlaee General technical requirenents
- PN M69790-1967 Statie tensile and shearing testings of brased joints
Japanese Industrial Standards Committee (JISC), repeated shear test
- JIS Z 2114:1977 Method of shear test for wood
- JIS B 6595:1991 Rotary clippers -- Test and inspection methods
- JIS K 7019:1999 Fiber-reinforced plastic composites -- Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus and minus 45 degree SIGN tension test method
- JIS Z 3192:1988 Methods of tension and shear tests for brazed joint
- JIS Z 2288:2003 Methods of tensile shear test and bend test for thin clad steel sheets
- JIS K 7079-2:2012 Carbon fiber reinforced plastics -- Testing methods for in-plane shear properties -- Part 2: Double V-notch shear method
- JIS Z 3192:1999 Methods of tensile and shear tests for brazed joint
- JIS K 6855:1994 Testing methods for impact shear strength of adhesive bonds
KR-KS, repeated shear test
- KS M ISO 14129-2016 Fibre-reinforced plastic composites－Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the ±45° tension test method
- KS B ISO 5187-2016 Methods of tension and shear tests for brazed joint
Professional Standard - Ferrous Metallurgy, repeated shear test
ES-AENOR, repeated shear test
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, repeated shear test
- GB/T 33334-2016 Test method for strength properties of adhesives in shear by tension loading of single-lap-joint laminated assemblies(composite and composite)
- GB/T 33332-2016 Test method for dynamic shear strength of adhesive tapes
- GB/T 34487-2017 Shear testing method of aluminium alloy products for structural members
- GB/T 33333-2016 Determination of shear strength by tensile loading in wood adhesives
Group Standards of the People's Republic of China, repeated shear test
- T/CSRA 14-2021 Test method for interlaminar shear properties of aramid fiber Ⅲ reinforced materials
- T/CSAE 206-2021 Test method of Interlaminar shear strength test for automobile fiber reinforced laminates at high strain rates
AT-ON, repeated shear test
Indonesia Standards, repeated shear test
IN-BIS, repeated shear test
(U.S.) Ford Automotive Standards, repeated shear test
Lithuanian Standards Office , repeated shear test
- LST EN ISO 14129:2001 Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the +/- 45° tension test method (ISO 14129:1997)
- LST EN 28749-2001 Pins and grooved pins - Shear test (ISO 8749:1986)
- LST EN 392-2000 Glued laminated timber - Shear test of glue lines
- LST EN ISO 22776:2005 Footwear - Test methods for accessories: Touch and close fasteners - Shear strength before and after repeated closing (ISO 22776:2004)
- LST EN 1191-2013 Windows and doors - Resistance to repeated opening and closing - Test method
- LST EN 12615-2000 Products and systems for the protection and repair of concrete structures - Test methods - Determination of slant shear strength
Military Standard of the People's Republic of China-General Armament Department, repeated shear test
- GJB 8671.17-2015 Test methods for metal cartridges Part 17: Repeated loading and repeated firing tests
- GJB 715.19-1990 Fastener test methods lap joint shear
- GJB 1709-1993 Test method for low temperature tensile shear strength of adhesives
BE-NBN, repeated shear test
Professional Standard - Non-ferrous Metal, repeated shear test
AENOR, repeated shear test
- UNE-EN 28749:1993 PINS AND GROOVED PINS. SHEAR TEST. (ISO 8749:1986).
- UNE-EN ISO 22776:2005 Footwear - Test methods for accessories: Touch and close fasteners - Shear strength before and after repeated closing (ISO 22776:2004)
- UNE-EN ISO 14129:1999 FIBRE-REINFORCED PLASTIC COMPOSITES. DETERMINATION OF THE IN-PLANE SHEAR STRESS/SHEAR STRAIN RESPONSE, INCLUDING THE IN-PLANE SHEAR MODULUS AND STRENGTH, BY THE +-45o TENSION TEST METHOD. (ISO 14129:1997).
Standard Association of Australia （SAA）, repeated shear test
- AS/NZS 4056.7:1992 Pliers and nippers - End cutting nippers - Dimensions and test values
- AS/NZS 4056.6:1992 Pliers and nippers - Lever assisted side cutting pliers, end and diagonal cutting nippers - Dimensions and test values
- AS 1289.6.2.2:2020 Methods of testing soils for engineering purposes, Method 6.2.2: Soil strength and consolidation tests — Determination of shear strength of a soil — Direct shear test using a shear box
- AS 1330:2004 Metallic materials - Drop weight tear test for ferritic steels
- AS/NZS 4056.8:1992 Pliers and nippers - Diagonal cutting nippers - Dimensions and test values
Underwriters Laboratories (UL), repeated shear test
- UL 1296-1992 Shear resistance tests for ceiling boards for manufactured homes
YU-JUS, repeated shear test
TH-TISI, repeated shear test
- TIS 2177-2004 Reverse torsion test for metallic wire [iso title: metallic materials.wire.reverse torsion test]
ZA-SANS, repeated shear test
- SANS 6044:2006 Shear strength in compression of wood adhesive bonds - Block shear test
AASHTO - American Association of State Highway and Transportation Officials, repeated shear test
- T 223-1996 Standard Method of Test for Field Vane Shear Test in Cohesive Soil
- T 320-2003 Standard Method of Test for Determining the Permanent Shear Strain and Stiffness of Asphalt Mixtures using the Superpave Shear Tester (SST)
- T 320-2007 Standard Method of Test for Determining the Permanent Shear Strain and Stiffness of Asphalt Mixtures Using the Superpave Shear Tester (SST)
- T223-1976 Standard Method of Test for Field Vane Shear Test in Cohesive Soil (R 1990)
- T 236-2008 Standard Method of Test for Direct Shear Test of Soils under Consolidated Drained Conditions
- T 236-2003 Standard Method of Test for Direct Shear Test of Soils under Consolidated Drained Conditions
Professional Standard - Civil Aviation, repeated shear test
- MH/T 6099-2013 Standard test method for lap shear strength of sealants
American National Standards Institute （ANSI), repeated shear test
Professional Standard - Aerospace, repeated shear test
- QJ 1634A-1996 Test method for compressive shear strength of adhesives
- QJ 2101-1991 Test method for shear properties of rigid foamed plastics
未注明发布机构, repeated shear test
RO-ASRO, repeated shear test
AIA/NAS - Aerospace Industries Association of America Inc., repeated shear test
TR-TSE, repeated shear test
- TS 1855-1975 RIGID CELLULAR PLASTICS - DETERMINATION OF SHEAR STRENGTH
Professional Standard - Textile, repeated shear test
- FZ/T 01113-2012 Test method of fabric shear property at low levels of deformation
GM Daewoo, repeated shear test
Taiwan Provincial Standard of the People's Republic of China, repeated shear test
- CNS 12548-1989 Method of Shear Test for Side Fillet Welded Joint
- CNS 11240-1985 Endurance (Mechanical) Testing Method for Electronic Components
AGMA - American Gear Manufacturers Association, repeated shear test
- 90FTM11-1990 Multiple Iteration- Respectable Trial-and-Error
CEN - European Committee for Standardization, repeated shear test
- EN 14869-2:2004 Structural adhesives - Determination of shear behaviour of structural bonds - Part 2: Thick adherends shear test
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, repeated shear test
- PREN 4525-1998 Aerospace Series Aluminium and Aluminium Alloys Test Methods Shear Testing (Edition P1)
- PREN 2021-2000 Aerospace Series Metallic Materials Test Methods Shear Testing for Thinflat Product (Edition P1)
NL-NEN, repeated shear test
- NVN-ENV 658-6-1994 Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Part 6: Determination of shear strength by double-punch shearing
JSAE - Society of Automotive Engineers of Japan@ Inc., repeated shear test
- JASO M347-1995 Test method for shear stability of automatic transmission fluids
VN-TCVN, repeated shear test
- TCVN 7452-6-2004 Windows and doors.Test Methods.Part 6: Repeated opening and closing test
- TCVN 1826-2006 Metallic materials.Wire.Reverse bend test
- TCVN 7130-2002 Leather.Tests for colour fastness.Colour fastness to cycles of to-and-fro rubbing
Professional Standard - Agriculture, repeated shear test
- GB/T 238-1984 Test method for repeated bending of metallic materials
JP-JASO, repeated shear test
- JASO M347-2007 Automatic transmission fluids-Test method for shear stability
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, repeated shear test
- GJB 5872-2006 Test method for laminar shearing strength of stretched acrylic plastic
Professional Standard - Military and Civilian Products, repeated shear test
- WJ 745-1994 Test method for compressive shear strength of adhesives for optical instruments
工业和信息化部, repeated shear test
- HG/T 5052-2016 Test method for thermal shear failure temperature of hot melt adhesives
- YB/T 4731-2019 Repeated bending test method for electrical steel strips (sheets)
Liaoning Provincial Standard of the People's Republic of China, repeated shear test
- DB21/T 2104-2013 Calibration procedure for metal wire repeated bending test machine
American Gear Manufacturers Association, repeated shear test