ZH
RU
ES

Preparation of contact discs

Preparation of contact discs, Total:497 items.

In the international standard classification, Preparation of contact discs involves: Materials and articles in contact with foodstuffs, Kitchen equipment, Testing of metals, Paper and board, Electrical accessories, Semiconductor devices, Switchgear and controlgear, Protection against electric shock, Packaging materials and accessories, Components for electrical equipment, Fibre optic communications, Lamps and related equipment, Printed circuits and boards, Railway rolling stock, Plastics, Medical equipment, Earth-moving machinery, Electrical engineering in general, Reinforced plastics, Paper products, Installations in buildings, Accident and disaster control, Miscellaneous domestic and commercial equipment, Electrical wires and cables, Electromechanical components for electronic and telecommunications equipment, Linear and angular measurements, Freight distribution of goods, Ceramics, Welding, brazing and soldering, Vocabularies, Sports equipment and facilities, Special purpose vehicles, Food products in general, Fasteners, Electric traction equipment, Wind turbine systems and other alternative sources of energy, Materials for aerospace construction, Protective equipment, Rubber and plastics products, Terminology (principles and coordination), Road vehicle systems, Applications of information technology, Conducting materials, Refractories, Graphical symbols.

German Institute for Standardization, Preparation of contact discs

DIN EN ISO 8442-8:2001 Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 8: Requirements for silver table and decorative holloware (ISO 8442-8:2000); German version EN ISO 8442-8:2000
DIN EN 645:1994 Paper and board intended to come into contact with foodstuffs; preparation of a cold water extract; German version EN 645:1993
DIN EN 647:1994 Paper and board intended to come into contact with foodstuffs; preparation of a hot water extract; German version EN 647:1993
DIN EN 645:1994-01 Paper and board intended to come into contact with foodstuffs; preparation of a cold water extract; German version EN 645:1993
DIN EN 647:1994-01 Paper and board intended to come into contact with foodstuffs; preparation of a hot water extract; German version EN 647:1993
DIN EN ISO 8442-7:2001 Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 7: Requirements for table cutlery made of silver, other precious metals and their alloys (ISO 8442-7:2000); German version EN ISO 8442-7:2000
DIN EN ISO 8442-6:2001 Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 6: Lightly silver plated table holloware protected by lacquer (ISO 8442-6:2000); German version EN ISO 8442-6:2000
DIN EN 15519:2008-01 Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract; German version EN 15519:2007
DIN EN 14481:2003-09 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact; German version EN 14481:2003
DIN EN ISO 11978:2000 Ophthalmic optics - Contact lenses and contact lens care products - Information supplied by the manufacturer (ISO 11978:2000); German version EN ISO 11978:2000
DIN EN 62271-106:2012 High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters (IEC 62271-106:2011); German version EN 62271-106:2011
DIN EN 15519:2008 Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract; German version EN 15519:2007
DIN EN 60947-4-3:2007 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads (IEC 60947-4-3:1999 + A1:2006); German version EN 60947-4-3:2000 + A1:2006
DIN EN ISO 8442-1:1998-03 Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 1: Requirements for cutlery for the preparation of food (ISO 8442-1:1997); German version EN ISO 8442-1:1997
DIN EN 1217:1998-01 Materials and articles in contact with foodstuffs - Test methods for water absorption of ceramic articles; German version EN 1217:1998
DIN EN 60947-4-3:2015 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads (IEC 60947-4-3:2014); German version EN 60947-4-3:2014
DIN EN 13258:2003-07 Materials and articles in contact with foodstuffs - Test methods for crazing resistance of ceramic articles; German version EN 13258:2003
DIN EN 1184:1997-08 Materials and articles in contact with foodstuffs - Test methods for translucency of ceramic articles; German version EN 1184:1997
DIN EN 1900:1998-10 Materials and articles in contact with foodstuffs - Non-metallic tableware - Terminology; German version EN 1900:1998
DIN 30722-1:2007 Roller contact tipper vehicles, roller containers - Part 1: Roller contact tipper vehicles up to 26 t, roller containers type 1570 made from steel
DIN 30722-2:2015 Roller contact tipper vehicles, roller containers - Part 2: Roller contact tipper vehicles up to 32 t, roller containers type 1570 made from steel
DIN 30722-1:2015 Roller contact tipper vehicles, roller containers - Part 1: Roller contact tipper vehicles up to 26 t, roller containers type 1570 made from steel
DIN 30722-2:2007 Roller contact tipper vehicles, roller containers - Part 2: Roller contact tipper vehicles up to 32 t, roller containers type 1570 made from steel
DIN EN 50042:1982 Low voltage switchgear and controlgear for industrial use; terminal marking; terminals for external associated electronic circuit components and contacts
DIN EN 60947-4-1:2011 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters (IEC 60947-4-1:2009); German version EN 60947-4-1:2010
DIN EN ISO 8442-1:1998 Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 1: Requirements for cutlery for the preparation of food (ISO 8442-1:1997); German version EN ISO 8442-1:1997
DIN EN 50011:1978-05 Low-voltage Switchgear and Controlgear for Industrial Use; Terminal Marking, Distinctive Number and Distinctive Letter for Particular Contactor Relays
DIN EN 1183:1997-08 Materials and articles in contact with foodstuffs - Test methods for thermal shock endurance; German version EN 1183:1997
DIN 43119-2:1983-05 Revolving bolts for contact wire clamp for overhead equipment; revolving bolts with thread
DIN 43119-2:1983 Revolving bolts for contact wire clamp for overhead equipment; revolving bolts with thread
DIN 30722-3:2015 Roller contact tipper vehicles, roller containers - Part 3: Roller contact tipper vehicles up to 12 t, roller containers type 900 made from steel
DIN 30722-3:2007 Roller contact tipper vehicles, roller containers - Part 3: Roller contact tipper vehicles up to 12 t, roller containers type 900 made from steel
DIN EN 60512-16-7:2009 Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping (IEC 60512-16-7:2008); German version EN 60512-16-7:2008
DIN EN 60512-16-7:2009-03 Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping (IEC 60512-16-7:2008); German version EN 60512-16-7:2008 / Note: DIN I...
DIN EN 13832-2:2019-04 Footwear protecting against chemicals - Part 2: Requirements for limited contact with chemicals; German version EN 13832-2:2018
DIN EN 13832-2:2019 Footwear protecting against chemicals - Part 2: Requirements for limited contact with chemicals
DIN EN 13832-2:2017 Footwear protecting against chemicals - Part 2: Requirements for limited contact with chemicals; German and English version prEN 13832-2:2017
DIN 53756:1974 Testing of plastics; storage test in contact with chemicals
DIN EN IEC 60947-4-1 Berichtigung 1:2021 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters (IEC 60947-4-1:2018/COR1:2020); German version EN IEC 60947-4-1:2019/AC:2020-05
DIN EN IEC 60947-4-1 Berichtigung 2:2021 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters (IEC 60947-4-1:2018/COR2:2021); German version EN IEC 60947-4-1:2019/AC:2021-04
DIN EN 60947-4-2:2007 Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters (IEC 60947-4-2:1999 + A1:2001 + A2:2006); German version EN 60947-4-2:2000 + A1:2002 + A2:2006
DIN EN 602:2004-07 Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff; German version EN 602:2004
DIN EN 60512-16-9:2009-03 Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force (IEC 60512-16-9:2008); German version EN 60512-16-9:2008 / Note: DIN IEC 60512-8 ...
DIN EN 60512-2-2:2004-01 Connectors for electronic equipment - Tests and measurements - Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method (IEC 60512-2-2:2003); German version EN 60512-2-2:2003 / Note: DIN...
DIN EN 1217:1998 Materials and articles in contact with foodstuffs - Test methods for water absorption of ceramic articles; German version EN 1217:1998
DIN EN 60947-4-3:2012 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads (IEC 60947-4-3:1999 + A1:2006 + A2:2011); German version EN 60947-4-3:2000 + A1:2006 + A2:2011
DIN EN 60512-16-9:2009 Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force (IEC 60512-16-9:2008); German version EN 60512-16-9:2008

IT-UNI, Preparation of contact discs

UNI 3137-1965 Microscopic examination of ferrous materials. Cutting of samples and specimens, preparaton and etching of specimens (etching reagents).
UNI 3138-1965
UNI 5583-1965 P
UNI 5863-1966
UNI 3489-1954
UNI 3488-1954
UNI 3492-1954
UNI 3491-1954
UNI 3490-1954
UNI 3494-1954
UNI 5862-1966
UNI 3487-1954
UNI 3594-1955
UNI 3251-1952
UNI 3250-1952

European Committee for Electrotechnical Standardization（CENELEC）, Preparation of contact discs

HD 419-1982 Low-Voltage Switchgear and Controlgear Contactors
EN IEC 62271-106:2021 High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters
EN 50274:2002 Low-Voltage Switchgear and Controlgear Assemblies - Protection Against Electric Shock - Protection Against Unintentional Direct Contact with Hazardous Live Parts
EN 62271-106:2011 High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters
FprEN IEC 60947-4-3:2020 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - Semiconductor controllers and semiconductor contactors for non-motor loads
HD 420-1982 Control Switches (Low Voltage-Devices for Control and Auxiliary Circuits, Including Contactor Relays)
HD 420 S2-1988 Control Switches (Low Voltage Switching - Devices for Control and Auxiliary Circuit, Including Contactor Relays)
EN 60947-4-3:2014 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
EN 60947-4-1:2010 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters (Incorporates Amendment A1: 2012)
HD 419.3 S1-1988 Low-Voltage Controlgear Part 3: Additional Requirements for Contactors Subject to Certification
EN 50013:1977 Low voltage switchgear and controlgear for industrial use Terminal marking and distinctive number for particular control switches
EN 60947-4-3:2000 Low-Voltage Switchgear and Controlgear Part 4.3: Contactors and Motor-Starters AC Semiconductor Controllers and Contactors for Non-Motor Loads Incorproates Amendment A1: December 2006 [: CENELEC HD 419.2 S1]
EN 50011:1977 Low voltage switchgear and controlgear for industrial use Terminal marking, distinctive number and distinctive letter for particular contactor relays
EN 60512-16-7:2008 Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping
EN 60947-4-2:2012 Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters
EN IEC 60947-4-2:2023 Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - Semiconductor motor controllers, starters and soft-starters
EN 60512-16-9:2008 Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force

European Committee for Standardization (CEN), Preparation of contact discs

EN 645:1993 Paper and board intended to come into contact with foodstuffs; preparation of a cold water extract
HD 419.2 S1-1987 Low-voltage controlgear; part 2: semiconductor contactors (solid state contactors)
prEN 645-1992 Paper and board intended to come into contact with foodstuffs; preparation of a cold water extract
prEN 647-1992 Paper and board intended to come into contact with foodstuffs; preparation of a hot water extract
EN 647:1993 Paper and board intended to come into contact with foodstuffs; preparation of a hot water extract
EN 15519:2007 Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract
EN ISO 9341:1998 Optics and Optical Instruments - Contact Lenses - Determination of Inclusions and Surface Imperfections for Rigid Contact Lenses ISO 9341:1996
EN 60947-4-1:1992 Low-voltage switchgear and controlgear; part 4: contactors and motor-starters; section 1: electromechanical contactors and motor-starters (IEC 947-4-1:1990)
DD ENV 13258-1998 Materials and Articles in Contact with Foodstuffs - Test Methods for Crazing Resistance of Ceramic Articles

RO-ASRO, Preparation of contact discs

SR EN 647-1996 Paper and board intented to come into contact with foodstuffs-Preparation of a hot water extract
SR EN 645-1996 Paper and board intended to come into contact with foodstuffs-Preparation of a cold water extract
STAS 8473-1988 Petroleum equipment JUMPERS OF HOISTING EQUIPMENT Radii of contact surfaces
STAS SR EN 60947-4-1-1995 Low-voltage switchgear and controlgear Part 4: Contactors and mo?ors-starters Section one: Electromechanical contactors and motor-starters
STAS 12561-1987 Geological investigation equipment JUMPERS FOR HOISTING EQUIPMENT Radii of contact'surfaces

CZ-CSN, Preparation of contact discs

CSN 35 4102-1997 Low-voltage controlgear Part 2: Semiconductor contactors (solid state contactors)
CSN 34 2855-1972 Suppresion of radio interference caused by contact devices
CSN 35 4055 Cast.4-1984 Electromechanical components for electronic equipment. Contact resistance variation
CSN 35 4055 Cast.74-1987 Electromechanical components for electronic equipment. Gauge retention force (resilient contacts)
CSN EN 50227 ZZ1-2001
CSN 35 4005 Cast.65-1985 Electromechanical components for electronic equipment. Contact insertion, release and extraction force

International Electrotechnical Commission (IEC), Preparation of contact discs

IEC 60158-2:1982 Low-voltage controlgear. Part 2 : Semiconductor contactors (solid state contactors)
IEC 62271-106:2011 High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters
IEC 62271-106:2011/COR1:2014 High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters; Corrigendum 1
IEC 60947-4-3:2011 Low-voltage switchgear and controlgear. Part 4-3: Contactors and motor-starters.AC semiconductor controllers and contactors for non-motor loads
IEC 60158-3:1985 Low-voltage controlgear. Part 3 : Additional requirements for contactors subject to certification
IEC 60947-4-3:1999 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
IEC 60947-4-3/COR1:2000 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads; Corrigendum 1
IEC 60947-4-3:2020 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - Semiconductor controllers and semiconductor contactors for non-motor loads
IEC 60947-4-1:2018 RLV Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
IEC 60947-4-1:2009+AMD1:2012 CSV Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
IEC 60947-4-1/COR1:2001 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters; Electromechanical contactors and motor starters
IEC 60947-4-1:2002 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters; Electromechanical contactors and motor-starters
IEC 60947-4-1:2009 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
IEC 60947-4-1:2000 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters; Electromechanical contactors and motor starters
IEC 60947-4-1:2018/COR1:2020 Corrigendum 1 - Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
IEC 60947-4-1:2018/ISH1:2020 Interpretation sheet 1 - Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
IEC 60947-4-1:2018/COR2:2021 Corrigendum 2 - Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
IEC 60947-4-3:2007 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
IEC 60947-4-1/AMD1:2002 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters; Electromechanical contactors and motor starters; Amendment 1
IEC 60947-4-1:2009/AMD1:2012 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters; Amendment 1
IEC TS 60201:2007 Use of conventional touch voltage limits - Application guide
IEC TS 61201:2007 Use of conventional touch voltage limits - Application guide
IEC 60947-4-1/AMD1:1994 Low-voltage switchgear and controlgear - Part 4: Contactors and motor-starters - Section 1: Electromechanical contactors and motor-starters; Amendment 1
IEC 62271-106:2021 High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters
IEC TR2 60947-5-4:1996 Low-voltage switchgear and controlgear - Part 5: Control circuit devices and switching elements - Section 4: Method of assessing the performance of low-energy contacts - Special tests
IEC 60130-11:1971 Connectors for frequencies below 3 MHz. Part 11 : Edge socket connectors with closed ends and having a contactspacing of 2.55 mm (0.1 in) mating either with board mounted connectors or printed wiring boards with edge board contacts
IEC 60130-11A:1975 Connectors for frequencies below 3 MHz. Part 11 : Edge socket connectors with closed ends and having a contactspacing of 2.55 mm (0.1 in) mating either with board mounted connectors or printed wiring boards with edge board contacts. First supplement: Mult
IEC 64/1584/DTS:2007 IEC/TS 61201, Ed. 2: Guide for the use of conventional touch voltage limits
IEC 60512-16-7:2008 Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping
IEC 60947-4-2/COR1:2002 Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters; Corrigendum 1
IEC 60947-4-2/AMD1/COR1:2002 Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters; Corrigendum 1
IEC 60947-4-2:2011 Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters

Danish Standards Foundation, Preparation of contact discs

DS/EN IEC 62271-106:2021 High-voltage switchgear and controlgear – Part 106: Alternating current contactors, contactor-based controllers and motor-starters
DS/EN 62271-106:2011 High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters
DS/EN 645:1994 paper and board intended to come into contact with foodstuffs. Preparation of a cold water extract
DS/EN 647:1994 Paper and board intended to come into contact with foodstuffs. Preparation of a hot water extract
DS/EN 15519:2008 Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract
DS/EN 60947-4-3/A2:2011 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
DS/EN 60947-4-3/A1:2007 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
DS/EN 60947-4-3:2001 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
DS/EN 14481:2003 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact
DS/EN 60947-4-1/A1:2012 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
DS/EN IEC 60947-4-1:2021 Low-voltage switchgear and controlgear – Part 4-1: Contactors and motor-starters – Electromechanical contactors and motor-starters
DS/EN 60947-4-1:2010 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
DS/EN 50012:1994 Low voltage switchgear and controlgear for industrial use - Terminal marking and distinctive number for auxiliary contacts of particular contactors
DS/EN 645:1993 Paper and board intended to come into contact ith foodstuffs - Preparation of a cold water xtract
DS/EN 647:1993 Paper and board intended to come into contact with foodstuffs - Preparation of a hot water extract
DS/IEC 158-1B:1981 Low-voltage controlgear. Part 1: Contactors. Second supplement to Publication 158-1 (1970)
DS/EN 60947-4-1/A1:1995 Low-voltage switchgear and controlgear - Part 4: Contactors and motorstarters - Section one: Electromechanical contactors and motor-starters
DS/EN 60947-4-1+Corr.:1994 Low-voltage switchgear and controlgear - Part 4: Contactors and motorstarters - Section one: Electromechanical contactors and motor-starters
DS/EN 50274:2003 Low-voltage switchgear and controlgear assemblies - Protection against electric shock - Protection against unintentional direct contact with hazardous live parts
DS/EN 50205:2003 Relays with forcibly guided (mechanically linked) contacts
DS/EN 50011:1994 Low voltage switchgear and controlgear for industrial use - Terminal marking, distinctive number and distinctive letter for particular contactor relays
DS/EN 50042:1994 Low voltage switchgear and controlgear for industrial use - Terminal marking - Terminals for external associated electronic circuit components and contacts
DS/EN 1217:1998 Materials and articles in contact with foodstuffs - Test methods for water absorption of ceramic articles
DS/EN 60512-16-7:2008 Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping
DS/EN 60512-16-2:2008 Connectors for electronic equipment - Tests and measurements - Part 16-2: Mechanical tests on contacts and terminations - Test 16b: Restricted entry
DS/EN 1184:1998 Materials and articles in contact with foodstuffs - Test methods for translucency of ceramic articles
DS/EN 1900:1999 Materials and articles in contact with foodstuffs - Non-metallic tableware - Terminology
DS/EN 60512-16-9:2008 Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force
DS/EN 13258:2003 Materials and articles in contact with foodstuffs - Test methods for crazing resistance of ceramic articles
DS/EN 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength
DS/EN 60512-16-18:2008 Connectors for electronic equipment - Tests and measurements - Part 16-18: Mechanical tests on contacts and terminations - Test 16r: Deflection of contacts, simulation
DS/EN 602:1994 Aluminium and aluminium alloys- Wrought roducts - Chemical composition of semi roducts used for the fabrication of articles for se in contact with food
DS/EN 60947-4-2:2012 Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters
DS/EN 60512-16-5:2008 Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts)
DS/EN 60512-2-2:2003 Connectors for electronic equipment - Tests and measurements - Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method

Association Francaise de Normalisation, Preparation of contact discs

NF C64-471-106*NF EN IEC 62271-106:2021 High-voltage switchgear and controlgear - Part 106 : alternating current contactors, contactor-based controllers and motor-starters
NF Q03-088*NF EN 647:1994 Paper and board intended to come into contact with foodstuffs. Preparation of a hot water extract.
NF EN 645:1994 Papier et carton destinés à entrer en contact avec les denrées alimentaires - Préparation d'un extrait aqueux à froid.
NF EN 647:1994 Papier et carton destinés à entrer en contact avec les denrées alimentaires - Préparation d'un extrait aqueux à chaud.
NF C64-471-106*NF EN 62271-106:2012 High-voltage switchgear and controlgear - Part 106 : alternating current contactors, contactor-based controllers and motor-starters.
NF Q03-084*NF EN 645:1994 Paper and board intended to come into contact with foodstuffs. Preparation of a cold water extract.
NF Q03-109*NF EN 15519:2007 Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract
NF EN 15519:2007 Papier et carton destinés à entrer en contact avec les denrées alimentaires - Préparation d'un extrait de solvant organique
NF EN IEC 62271-106:2021 Appareillage à haute tension - Partie 106 : contacteurs, combinés de démarrage à contacteurs et démarreurs de moteurs, pour courant alternatif
NF EN IEC 60947-4-1:2019 Appareillage à basse tension - Partie 4-1 : contacteurs et démarreurs de moteurs - Contacteurs et démarreurs électromécaniques
NF EN 14481:2003 Matériaux et articles en contact avec les denrées alimentaires - Plastiques - Méthodes d'essai pour la détermination d'un contact gras
NF C63-001-4-1*NF EN IEC 60947-4-1:2019 Low-voltage switchgear and controlgear - Part 4-1 : contactors and motor-starters - Electromechanical contactors and motor-starters
NF C63-110/A2:2005 Low-voltage switchgear and controlgear - Part 4-1 : contactors and motor-starters - Electromechanical contactors and motor-starters.
NF D21-314:2023 Matériaux et articles en contact avec les denrées alimentaires - Evaluation d'aptitude au chauffage par micro-ondes des articles en métal et alliage au contact de denrées alimentaires
NF C63-110:2010 Low-voltage switchgear and controlgear - Part 4-1 : contactors and motor-starters - Electromechanical contactors and motor-starters.
NF C63-110/A1:2012 Low-voltage switchgear and controlgear - Part 4-1 : contactors and motor-starters - Electromechanical contactors and motor-starters
NF EN 60947-4-3:2014 Appareillage à basse tension - Partie 4-3 : contacteurs et démarreurs de moteurs - Gradateurs et contacteurs à semiconducteurs pour charges, autres que des moteurs, à courant alternatif
NF C63-032:1978 Low-voltage switchgear and controlgear for industrial use. Terminal marking and distinctive number for auxiliary contacts of particular contactors.
NF C64-150:1985 A.C. high-voltage switchgear and controlgear. High-voltage alternating current contactors.
NF EN 50274:2002 Ensembles d'appareillage à basse tension - Protection contre les chocs électriques - Protection contre le contact direct involontaire avec des parties actives dangereuses
NF C63-113:2000 Low-voltage switchgear and controlgear - Part 4-3 : contactors and motor-starters - A.C. semiconductor controllers and contactors for non-motor loads.
NF C63-474*NF EN 50274:2002 Low-voltage switchgear and controlgear assemblies - Protection against electric shock - Protection against unintentional direct contact with hazardous live parts
NF H90-030:1991 SERIES 1 FREIGHT CONTAINERS. INTERFACE CONNECTIONS FOR TANK CONTAINERS.
NF EN 1217:1998 Matériaux et objets en contact avec les denrées alimentaires - Méthodes d'essai pour l'absorption d'eau par les objets en céramique
NF EN 13258:2003 Matériaux et articles en contact avec les denrées alimentaires - Méthodes d'essai de la résistance au tressaillage des articles en céramique
NF C63-141:1985 Control switches. (low-voltage switching-devices for control and auxiliary circuits, including contactor relays). Part 2 : special requirements for specific types of control switches.
UTE C93-429 L1U*UTE C93-429 L1:1986 Electronic components. Connecting devices. Multicontact board mounted connectors for printed boards with 2,54 mm spacing. Type he 11. Book 1.
NF EN 60512-2-3:2002 Connecteurs pour équipements électroniques - Essais et mesures - Partie 2-3 : essais de continuité électrique et de résistance de contact - Essai 2c : variation de la résistance de contact
NF EN 60947-4-2:2012 Appareillage à basse tension - Partie 4-2 : contacteurs et démarreurs de moteurs - Gradateurs et démarreurs à semiconducteurs de moteurs à courant alternatif
NF EN 1184:1997 Matériaux et objets en contact avec les denrées alimentaires - Méthodes d'essai visant à déterminer la translucidité des objets en céramique
NF C63-140:1985 Control switches. (low-voltage switching-devices for control and auxiliary circuits, including contactor relays). Part 1. Section 1 : general requirements.
NF C93-400-16-7*NF EN 60512-16-7:2008 Connectors for electronic equipment - Tests and measurements - Part 16-7 : mechanical tests on contacts and terminations - Test 16g : measurement of contact deformation after crimping
NF EN 60512-16-7:2008 Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-7 : essais mécaniques des contacts et des sorties - Essai 16g : mesure de la déformation d'un contact après sertissage
NF EN 60512-16-9:2008 Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-9 : essais mécaniques des contacts et des sorties - Essai 16i : force de maintien du ressort de contact de mise à la masse
NF S73-513-2*NF EN 13832-2:2018 Footwear protecting against chemicals - Part 2 : requirements for limited contact with chemicals
NF EN 13832-2:2018 Chaussure protégeant contre les produits chimiques - Partie 2 : exigences en cas de contact limité avec des produits chimiques
NF C63-112*NF EN 60947-4-2:2012 Low-voltage switchgear and controlgear - Part 4-2 : contactors and motor-starters - AC semiconductor motor controllers and starters
NF EN IEC 60947-4-2:2023 Appareillage à basse tension - Partie 4-2 : contacteurs et démarreurs de moteurs - Gradateurs, démarreurs et démarreurs progressifs à semiconducteurs de moteurs
NF D21-803*NF EN 12571:1999 Materials and articles in contact with foodstuffs. Transport units for catering containers containing prepared foodstuffs. Thermal and hygienic requirements and testing.
NF EN 602:2004 Aluminium et alliages d'aluminium - Produits corroyés - Composition chimique des demi-produits utilisés pour la fabrication d'articles destinés à entrer en contact avec les denrées alimentaires
NF EN 3155-083:2019 Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 083 : contacts électriques, femelles, type A, à sertir, classe S, taille 8 - Norme de produit
NF EN 3155-075:2022 Série aérospatiale - Contacts électriques dans les organes de connexion - Partie 075 : contacts électriques, quadrax, taille 8, femelles, type E, à sertir, classe R - Norme de produit
NF C63-031:1978 Low-voltage switchgear and controlgear for industrial use. Terminal marking distinctive number and distinctive letter for particular contactors relays.
NF EN 3155-080:2019 Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 080 : contacts électriques taille 22 pour EN 2997, mâles, type A, à sertir, classe T - Norme de produit
NF EN 3155-079:2019 Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 079 : contacts électriques taille 22 pour EN 2997, femelles, type A, à sertir, classe S - Norme de produit
NF EN 3155-081:2019 Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 081 : contacts électriques taille 22 pour EN 2997, femelles, type A, à sertir, classe T - Norme de produit
NF EN 3155-078:2019 Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 078 : contacts électriques taille 22 pour EN 2997, mâles, type A, à sertir, classe S - Norme de produit
NF EN 60512-2-2:2003 Connecteurs pour équipements électroniques - Essais et mesures - Partie 2-2 : essais de continuité électrique et de résistance de contact Essai 2b : résistance de contact - Méthode du courant d'essai spécifié
NF A91-318*NF EN ISO 4531:2018 Vitreous and porcelain enamels - Release from enamelled articles in contact with food - Methods of test and limits
NF EN IEC 61076-2-114:2020 Connecteurs pour équipements électriques et électroniques - Exigences de produit - Partie 2-114 : connecteurs circulaires - Spécification particulière pour les connecteurs avec verrouillage à vis M8 avec contacts de puissance et contact de signau...

AENOR, Preparation of contact discs

UNE-EN 62271-106:2012 High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters
UNE-EN 645:1994 PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOOD STUFFS. PREPARATION OF A COLD WATER EXTRACT.
UNE 21812:1982 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR FOR INDUSTRIAL USE. TERMINAL MARKING AND DISTINCTIVE NUMBER FOR AUXILIARY CONTACTS OF PARTICULAR CONTACTORS.
UNE-EN 647:1994 PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS. PREPARATION OF A HOT WATER EXTRACT.
UNE-EN 15519:2008 Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract
UNE-EN 60947-4-3:2014 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
UNE-EN 14481:2004 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact
UNE-EN 60947-4-1:2011/A1:2013 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
UNE-EN 60947-4-1:2011 Low-voltage switchgear and controlgear -- Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
UNE-EN 50274:2003 Low-voltage switchgear and controlgear assemblies - Protection against electric shock - Protection against unintentional direct contact with hazardous live parts.
UNE 21811:1982 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR FOR INDUSTRIAL USE. TERMINAL MARKING, DISTINCTIVE NUMBER LETTER FOR PARTICULAR CONTACTOR RELAYS.
UNE-EN 1900:1999 Materials and articles in contact with foodstuffs - Non-metallic tableware - Terminology
UNE-EN 60947-4-2:2013 Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters
UNE-EN 60512-2-2:2004 Connectors for electronic equipment - Tests and measurements -- Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method

ES-UNE, Preparation of contact discs

UNE-EN IEC 62271-106:2021 High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters (Endorsed by Asociación Española de Normalización in July of 2021.)
UNE-EN 645:1994 ERRATUM:2005 Paper and board intended to come into contact with foodstuffs. Preparation of a cold water extract.
UNE-EN 50274:2003 CORR:2010 Low-voltage switchgear and controlgear assemblies - Protection against electric shock - Protection against unintentional direct contact with hazardous live parts
UNE-EN IEC 60947-4-1:2021/AC:2021-04 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
UNE-EN IEC 60947-4-1:2021 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
UNE-EN 50003:1973 LOW VOLTAGE SWITCHGEAR END CONTROLGEAR FOR INDUSTRIAL USE. DIMENSIONS. FIXING HOLES OF MOTOR CONTACTORS. (Endorsed by AENOR in September of 1994.)
UNE-EN 50002:1972 LOW VOLTAGE SWITCHGEAR END CONTROLGEAR FOR INDUSTRIAL USE. DIMENSIONS. FIXING HOLES OF CONTACTOR RELAYS. (Endorsed by AENOR in September of 1994.)
UNE-EN 1217:1997 MATERIALS AND ARTICLES IN CONTACT WITH FOODSTUFFS - TEST METHODS FOR WATER ABSORPTION OF CERAMIC ARTICLES (Endorsed by AENOR in December of 1997.)
UNE-EN 13258:2003 Materials and articles in contact with foodstuffs - Test methods for crazing resistance of ceramic articles.
UNE-EN 1184:1997 MATERIALS AND ARTICLES IN CONTACT WITH FOODSTUFFS - TEST METHODS FOR TRANSLUCENCY OF CERAMIC ARTICLES (Endorsed by AENOR in August of 1997.)
UNE-EN 60512-16-7:2008 Connectors for electronic equipment - Tests and measurements -- Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping (Endorsed by AENOR in February of 2009.)
UNE-EN 13832-2:2020 Footwear protecting against chemicals - Part 2: Requirements for limited contact with chemicals
UNE-EN 60512-16-9:2008 Connectors for electronic equipment- Tests and measurements- Part 16-9: Mechanical tests on contacts and terminations- Test 16i:Grounding contact spring holding force (Endorsed by AENOR in November of 2008.)

British Standards Institution (BSI), Preparation of contact discs

BS EN 62271-106:2011 High-voltage switchgear and controlgear. Alternating current contactors, contactor-based controllers and motor-starters
BS EN IEC 62271-213:2021 High-voltage switchgear and controlgear. Alternating current contactors, contactor-based controllers and motor-starters
BS EN IEC 62271-106:2021 High-voltage switchgear and controlgear. Alternating current contactors, contactor-based controllers and motor-starters
20/30402666 DC BS EN 50696. Contact Interface for Automated Connection Device
BS EN IEC 60947-4-1:2019 Low-voltage switchgear and controlgear - Contactors and motor-starters. Electromechanical contactors and motor-starters
BS EN 60947-4-1:2010 Low-voltage switchgear and controlgear - Contactors and motor-starters - Electromechanical contactors and motor-starters
BS EN 60947-4-3:2000+A2:2011 Low-voltage switchgear and controlgear. Contactors and motor-starters. AC semiconductor controllers and contactors for non-motor loads
BS EN 60947-4-3:2014 Low-voltage switchgear and controlgear. Contactors and motor-starters. AC semiconductor controllers and contactors for non-motor loads
BS EN 15519:2007 Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract
BS EN ISO 11978:2000 Ophthalmic optics - Contact lenses and contact lens care products - Information supplied by the manufacturer
18/30378901 DC BS EN 62271-106. High-voltage switchgear and controlgear. Part 106. Alternating current contactors; contactor-based controllers and motor-starters
22/30451630 DC BS EN 60947-4-1. Low-voltage switchgear and controlgear - Part 4-1. Contactors and motor-starters. Electromechanical contactors and motor-starters
18/30383448 DC BS EN 60947-4-3. Low-voltage switchgear and controlgear. Part 4-3. Contactors and motor-starters. Semiconductor controllers and semiconductor contactors for non-motor loads
18/30375223 DC BS EN 60947-4-3. Low-voltage switchgear and controlgear. Part 4-3. Contactors and motor-starters. Semiconductor controllers and semiconductor contactors for non-motor loads
BS ISO 1268-2:2001 Fibre-reinforced plastics - Methods of producing test plates - Contact and spray-up moulding
BS EN ISO 8442-1:1998 Materials and articles in contact with foodstuffs. Cutlery and table holloware. Requirements for cutlery for the preparation of food
BS EN 60512-16-7:2008 Connectors for electronic equipment – Tests and measurements –– Part 16-7: Mechanical tests on contacts and terminations – Test 16g: Measurement of contact deformation after crimping
BS EN 60947-4-2:2012 Low-voltage switchgear and controlgear. Contactors and motor-starters. AC semiconductor motor controllers and starters
BS EN IEC 60947-4-2:2023 Low-voltage switchgear and controlgear - Contactors and motor-starters. Semiconductor motor controllers, starters and soft-starter
BS 5424-3:1988 Specification for controlgear for voltages up to and including 1000 V a.c. and 1200 V d.c.. Additional requirements for contactors subject to certification
BS EN 60512-16-9:2008 Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Test 16i. Grounding contact spring holding force
BS EN 60512-16-2:2008 Connectors for electronic equipment - Tests and measurements - Part 16-2: Mechanical tests on contacts and terminations — Test 16b: Restricted entry
BS 9525 N0001:1982 Detail specification for multi-contact two-part printed board electrical connectors
BS EN 60512-16-18:2008 Connectors for electronic equipment - Tests and measurements - Part 16-18: Mechanical tests on contacts and terminations — Test 16r: Deflection of contacts, simulation
BS 5583:1978 Specification for low voltage switchgear and controlgear for industrial use. Terminal marking, distinctive number and distinctive letter for particular contactor relays
BS EN 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations – Test 16c: Contact-bending strength
BS ISO/IEC 10373-6:2020+A1:2021 Cards and security devices for personal identification. Test methods - Contactless proximity objects
BS ISO/IEC 14443-4:2018+A2:2020 Cards and security devices for personal identification. Contactless proximity objects - Transmission protocol

未注明发布机构, Preparation of contact discs

BS 5424-2:1987(1999) Low - voltage controlgear — Part 2 : Specification for semiconductor contactors (solid state contactors)
BS EN 645:1994(1999) Paper and board intended to come into contact with foodstuffs — Preparation of a cold water extract
BS EN 647:1994(1999) Paper and board intended to come into contact with foodstuffs — Preparation of a hot water extract
BS 5582:1978(1999) Specification for Low voltage switchgear and controlgear for industrial use — Terminal marking and distinctive number for auxiliary contacts of particular contactors
DIN EN 50012:1978 Low voltage switchgear and controlgear for industrial use — terminal marking and distinctive number; for auxiliary contacts of particular contactors
BS EN IEC 60947-4-1:2019(2021) Low - voltage switchgear and controlgear Part 4 - 1 : Contactors and motor - starters — Electromechanical contactors and motor - starters
BS EN 50274:2002(2010) Low - voltageswitchgear and controlgear assemblies — Protection against electric shock — Protection against unintentional direct contact with hazardous live parts
BS 5424-3:1988(1999) Specification for Controlgear for voltages up to and including 1000 V A.C. and 1200 V D.C. Part 3 : Additional requirements for contactors subject to certification
BS 5583:1978(1999)*EN 50011 Specification for Low voltage switchgear and controlgear for industrial use Terminal marking, distinctive number and distinctive letter for particular contactor relays

BE-NBN, Preparation of contact discs

NBN EN 645-1994 Paper and board intended to come into contact with foodstuffs. Preparation of a cold water extract
NBN EN 647-1994 Paper and board intended to come into contact with foodstuffs. Preparation fo a hot water extract
NBN C 63-012-1973
NBN C 63-158.1 ADD 2-1982
NBN C 63.158.1 ADD 1-1982
NBN-HD 1003-1992

PL-PKN, Preparation of contact discs

PN Z08206-1988 Labour protection Not-contacting protective for manufacturing machines and e?uipment General re?uirements
PN-EN IEC 62271-106-2021-09 E High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters (IEC 62271-106:2021)
PN E06150-41-1992 Low-voltage switchgear and controlgear Contactors and motor-starters
PN-EN IEC 60947-4-1-2019-05/AC-2021-06 E Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters (IEC 60947-4-1:2018/COR2:2021)
PN-EN 13832-2-2019-01 P Footwear protecting against chemicals -- Part 2: Requirements for limited contact with chemicals

Lithuanian Standards Office , Preparation of contact discs

LST EN IEC 62271-106:2021 High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters (IEC 62271-106:2021)
LST EN 62271-106-2012 High-voltage switchgear and controlgear -- Part 106: Alternating current contactors, contactor-based controllers and motor-starters (IEC 62271-106:2011)
LST EN 647-2001 Paper and board intended to come into contact with foodstuffs - Preparation of a hot water extract
LST EN 645-2001 Paper and board intended to come into contact with foodstuffs - Preparation of a cold water extract
LST EN 50274-2003 Low-voltage switchgear and controlgear assemblies. Protection against electric shock. Protection against unintentional direct contact with hazardous live parts
LST EN 50274-2003/AC-2009 Low-voltage switchgear and controlgear assemblies. Protection against electric shock. Protection against unintentional direct contact with hazardous live parts
LST EN 15519-2008 Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract
LST EN 14481-2004 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact
LST EN 60947-4-1-2010 Low-voltage switchgear and controlgear -- Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters (IEC 60947-4-1:2009)
LST EN 60947-4-3-2000/A1-2007 Low-voltage switchgear and controlgear -- Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads (IEC 60947-4-3:1999/A1:2006)
LST EN 60947-4-3-2000/A2-2011 Low-voltage switchgear and controlgear -- Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads (IEC 60947-4-3:1999/A2:2011)
LST EN 60947-4-3-2000 Low-voltage swichgear and controlgear. Part 4: Contactors and motor-starters. Section 3: AC semiconductor controllers and contactors for non-motor load (IEC 60947-4-3:1999)
LST EN 60947-4-1-2010/A1-2012 Low-voltage switchgear and controlgear -- Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters (IEC 60947-4-1:2009/A1:2012)
LST EN IEC 60947-4-1/AC:2021 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters (IEC 60947-4-1:2018/COR2:2021)
LST EN 50205-2003 Relays with forcibly guided (mechanically linked) contacts
LST EN 1217-2000 Materials and articles in contact with foodstuffs - Test methods for water absorption of ceramic articles
LST EN 1184-2000 Materials and articles in contact with foodstuffs - Test methods for translucency of ceramic articles
LST EN 1900-2003 Materials and articles in contact with foodstuffs - Non-metallic tableware - Terminology
LST EN 13258-2004 Materials and articles in contact with foodstuffs - Test methods for crazing resistance of ceramic articles
LST EN 50011-2001 Low-voltage switchgear and controlgear for industrial use. Terminal marking, distinctive number and distinctive letter for particular contactor relays
LST EN 60512-16-7-2008 Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping (IEC 60512-16-7:2008)
LST EN 60947-5-4-2004 Low-voltage switchgear and controlgear. Part 5-4: Control circuit devices and switching elements. Method of assessing the performance of low-energy contacts. Special tests (IEC 60947-5-4:2002)
LST EN 60512-16-2-2008 Connectors for electronic equipment - Tests and measurements - Part 16-2: Mechanical tests on contacts and terminations - Test 16b: Restricted entry (IEC 60512-16-2:2008)
LST EN 60512-16-9-2008 Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force (IEC 60512-16-9:2008)

RU-GOST R, Preparation of contact discs

GOST EN 50274-2012 Low-voltage switchgear and controlgear assemblies. Protection against electric shock. Protection against unintentional direct contact to hazardous live parts
GOST 26430-1985 Non-contact route switchgears (controlgears). General technical requirements
GOST 31374-2009 Connection brake pipe with electrocontact 369A. Specifications
GOST IEC 60947-4-3-2014 Low-voltage switchgear and controlgear. Part 4-3. Contactors and motor starters. AC semiconductor controllers and contactors for non-motor loads
GOST R 50030.4.1-2002 Low-voltage switchgear and controlgear. Part 4-1. Contactors and motor-starters. Electromechanical contactors and motor-starters
GOST 3884-1977 Contacts for electrical comutation apparates. Construction and dimensions
GOST 2584-1986 Copper and copper alloys trolley wires. Specifications
GOST 24606.3-1982 Switching and mocenting components, and electrical connectors. Methods of measurement of contact resistance, and dynamic and static instability of contact transient resistance
GOST 30011.4.1-1996 Low-voltage switchgear and controlgear. Part 4. Contactors and motor-starters. Section 1. Electromechanical contactors and motor-starters
GOST 3899-1981 Transducers with electric contacts for control of linear dimensions. Specifications
GOST 33346-2015 Polymer composites. Production of plates by contact and spray-up moulding for preparation of test specimens
GOST R 50186-1992 Ceramic ware in contact with food. Release of lead and cadmium. Permissible limits
GOST 10594-1980 Equipment for arc, resistance, ultrasound and plasma treatment. Series of parameters
GOST 2.709-1989 Unified system of design documentetion. Conventions of wires and terminal connections of electrical elements, equipment and subcircuits in circuit diagrams

Standard Association of Australia （SAA）, Preparation of contact discs

AS/NZS IEC 60947.4.3:2015
AS/NZS IEC 60947.4.1:2015
AS 60947.4.1:2004 Low-voltage switchgear and controlgear - Contactors and motor-starters - Electromechanical contactors and motor-starters
AS/NZS 3947.4.1:2001 Low-voltage switchgear and controlgear Part 4.1: Contactors and motor-starters - Electromechanical contactors and motor-starters
AS/NZS 3947.4.3:2000 Low-voltage switchgear and controlgear - Contactors and motor-starters - A.C. semiconductor controllers and contactors for non-motor loads
AS/NZS IEC 60947.4.2:2015
AS 60947.4.2:2004 Low-voltage switchgear and controlgear - Contactors and motor-starters - A.C. semiconductor motor controllers and starters
AS 3855:1994 Suitability of plumbing and water distribution systems products for contact with potable water

AT-ON, Preparation of contact discs

ONORM EN 645-1994 Paper and board intended to come into contact with foodstuffs. Preparation of a cold water extract
ONORM EN 647-1994 Paper and board intended to come into contact with foodstuffs. Preparation of a hot water extract
ONORM B 3306-1982 Scaling resistance test of prefabricated concrete products exposed to de-icing chemicals
ONORM M 9400 Beib.3-1993 Dry cleaning equipment - Test book and operating diary for contact water cleaning plants

ES-AENOR, Preparation of contact discs

SE-SIS, Preparation of contact discs

SIS SS EN 50 012-1989 Low-voltage switchgear and controlgear for industrial use — Terminal marking and distinctive number for auxiliary contacts ofparticular contactors
SIS SS EN 50 011-1989 Low-voltage switchgear and controlgear for industrial use — Terminal marking, distinctive number and distinctive letter for particular contactor relays
SIS SS EN 50 042-1989 Low-voltage switchgear and controlgear for industrial use —Terminal marking —Terminals for externa! associated electronic circuit components and contacts

YU-JUS, Preparation of contact discs

JUS N.K5.014-1987 Low-voltage controlgear. Contactors. Protection of a contactorby a short-circuit protective device
JUS N.K5.020-1979 Low-voltage controlgear. Contactors. Conventional test circuits for the verification of rated making and breaking capacities
JUS N.K5.010/1-1987 Low-voltage controlgear. Contactors. General reguirements and testing. Additions and amendments
JUS N.K5.011-1979 Low-voltage controlgear. Contactors. Information to begiven by the userwhen conditions for operation in service differ from the standard
JUS N.K5.054-1982 Low voltage control switches. Special requirements for contactor relays
JUS N.K5.058-1988 Low-voltage controlgear. Terminal marking, distinctive number and distinctive letter for particular contactors relays
JUS N.R4.705-1989 Connectors for frequencies below 3 MHz. Edge socket connectors having a contact spacihg of 3,96 mm mating either with board mounted connectors or printed wiring board]nitb edge board contacts. Climatic categorj 40/085/21

American Society for Testing and Materials (ASTM), Preparation of contact discs

ASTM F2071-00(2022) Standard Specification for Switch, Position Proximity (Noncontact) or Limit (Mechanical Contact), Fiber-Optic
ASTM F2071-00(2011) Standard Specification for Switch, Position Proximity (Noncontact) or Limit (Mechanical Contact), Fiber-Optic
ASTM B613-76(2012) Standard Guide for Preparing Specifications for Miniature Brushes of Composite Materials for Sliding Electric Contacts
ASTM C582-09 Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment
ASTM B888-98 Standard Specification for Copper Alloy Strip for Use in the Manufacture of Electrical Connectors or Spring Contacts

Korean Agency for Technology and Standards (KATS), Preparation of contact discs

KS C IEC 60947-4-1:2003 Low-voltage switchgear and controlgear-Part 4-1:Contactors and motor-starters-Electromechanical contactors and motor-starters
KS B ISO 11978:2005 Ophthalmic optics－Contact lenses and contact lens care products－Information supplied by the manufacturer
KS C IEC 60947-4-3-2012(2022) Low-voltage switchgear and controlgear－Part 4-3：Contactors and motor-starters－AC semiconductor controllers and contactors for non-motor loads
KS C IEC 60947-4-3-2012(2017) Low-voltage switchgear and controlgear－Part 4-3：Contactors and motor-starters－AC semiconductor controllers and contactors for non-motor loads
KS C IEC 60947-4-1:2022 Low-voltage switchgear and controlgear —Part 4-1: Contactors and motor-starters —Electromechanical contactors and motor-starters
KS C IEC 60947-4-1-2016(2021) Low－voltage switchgear and controlgear－Part 4－1：Contactors and motor－starters－Electromechanical contactors and motor－starters
KS B ISO 6682-2015(2020) Earth-moving machinery — Zones of comfort and reach for controls
KS C IEC 60947-4-1:2016 Low－voltage switchgear and controlgear－Part 4－1：Contactors and motor－starters－Electromechanical contactors and motor－starters
KS C IEC 62271-106:2019 High-voltage switchgear and controlgear — Part 106: Alternating current contactors, contactor-based controllers and motor-starters
KS C IEC 60130-16:2003 Connectors for frequencies below 3MHz-Part 16:Printed circuit board mounted connectors with two rows of staggered contacts and terminations with spacing of 2.54mm(0.1in)
KS G ISO 8442-1:2010 Materials and articles in contact with foodstuffs－Cutlery and table holloware－Part 1：Requirements for cutlery for the preparation of food
KS G ISO 8442-1-2010(2020) Materials and articles in contact with foodstuffs－Cutlery and table holloware－Part 1：Requirements for cutlery for the preparation of food
KS C IEC 60130-16:2014 Connectors for frequencies below 3MHz－Part 16：Printed circuit board mounted connectors with two rows of staggered contacts and terminations with spacing of 2.54mm(0.1in)
KS C IEC 60130-11:2003 Connectors for frequencies below 3 MHz(Mc/s)-Part 11:Edge socket connectors with closed ends and having a contact spacing of 2.54 mm(0.1 in) mating either with board mounted connectors or printed wiring boards with edge board contacts
KS C IEC 60130-11:2014 Connectors for frequencies below 3 MHz(Mc/s)-Part 11:Edge socket connectors with closed ends and having a contact spacing of 2.54 mm(0.1 in) mating either with board mounted connectors or printed wiring boards with edge board contacts

CENELEC - European Committee for Electrotechnical Standardization, Preparation of contact discs

EN 50012:1977 Low voltage switchgear and controlgear for industrial use Terminal marking and distinctive number for auxiliary contacts of particular contactors
EN 50205:1997 Relays with Forcibly Guided (Linked) Contacts
EN 60947-4-1:2001 Low-Voltage Switchgear and Controlgear - Part 4-1: Contactors and Motor-Starters - Electromechanical Contactors and Motor-Starters
EN 50205:2002 Relays with Forcibly Guided (Mechanically Linked) Contacts
EN 60947-4-2:1996 Low-Voltage Switchgear and Controlgear Part 4: Contactors and Motor-Starters Section 2: AC Semiconductor Motor Controllers and Starters
EN 60512-16-5:2008 Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts)

Indonesia Standards, Preparation of contact discs

SNI 04-6202.3-2000 Plugs and socket-outlets and couplers for industrial purposes. Part 3: Particular requirements for plugs, socket outlets, connectors and appliance inlets for use in explosive gas atmospheres
SNI ISO 11978:2010 Ophthalmic optics - Contact lenses and contact lens care products - Information supplied by the manufacturer
SNI 04-3892.2.3-2000 Plugs and socket-outlets for household and similar purposes - Part 2.3: Particular requirements for switched socket outlets without interlock for fixed installations

VN-TCVN, Preparation of contact discs

TCVN 2360-1978 Ellip soidal dished hedes flanged made of steel for vessels apparatus and boilers.Basic dimensions
TCVN 6592-4-1-2009 Low-voltage switchgear and controlgear.Part 4-1: Contactors and motor-starters.Electromechanical contactors and motor-starters

GOSTR, Preparation of contact discs

GOST IEC 60947-4-3-2017 Low-voltage switchgear and controlgear. Part 4-3. Contactors and motor-starters. AC semiconductor controllers and contactors for non-motor loads
GOST 25185.1-1995 Ceramic ware in contact with food. Release of lead and cadmium. Permissible limits
GOST R 59218-2020 Rugby equipment. Projectiles for practicing contact and grabs. Technical specifications
GOST IEC 60947-4-2-2017 Low-voltage switchgear and controlgear. Part 4-2. Contactors and motor-starters. AC semiconductor motor controllers and starters for AC electric motors

PT-IPQ, Preparation of contact discs

NP 2895-1984

International Organization for Standardization (ISO), Preparation of contact discs

ISO 11978:2000 Ophthalmic optics - Contact lenses and contact lens care products - Information supplied by the manufacturer
ISO 9341:1996 Optics and optical instruments - Contact lenses - Determination of inclusions and surface imperfections for rigid contact lenses
ISO 1268-2:2001 Fibre-reinforced plastics - Methods of producing test plates - Part 2: Contact and spray-up moulding

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Preparation of contact discs

GB/T 14808-2016 High-voltage alternating current contactors, contactor-based controllers and motorstarters
GB/T 14048.12-2006 Low voltage switchgear and controlgear Part 4-3: Contactors and motor starters AC semiconductor controllers and contactors for non motor loads
GB/T 14048.12-2016 Low-voltage switchgear and controlgear Part 4-3: Contactors and motor starters for AC semiconductor controllers and contactors for non-motor loads
GB 14048.4-2003 Low-voltage switchgear and controlgear-Electromechanical contactors and motor-starters
GB 14048.4-1993 Low-voltage switchgear and controlgear. Low-voltage electromechanical contactors and motor starters
GB/T 14048.4-2010 Low-voltage switchgear and controlgear.Part 4-1:Contactors and motor-starters.Electromechanical contactors and motor-starters (Including motor protector)
GB 14048.4-2010 Low-voltage switchgear and controlgear.Part 4-1:Contactors and motor-starters.Electromechanical contactors and motor-starters (Including motor protector)
GB/T 27797.2-2011 Fibre-reinforced plastics.Methods of producing test plates.Part 2:Contact and spray-up moulding
GB 12651-1990 Standard permissible limits of lead and cadmium release from ceramic ware in contact with food
GB 12651-2003 Standard permissible limits of lead and cadmium release from ceramic ware in contact with food
GB 14048.6-1998 Low-voltage switchgear and controlgear. Contactors and motor-starters. Section 2: AC semiconductor motor controllers and starters

Canadian Standards Association (CSA), Preparation of contact discs

CAN/CSA-C22.2 NO.60947-4-1-2007 Appareillage à basse tension - Partie 4-1 : Contacteurs et démarreurs de moteurs - Contacteurs et démarreurs électromécaniques (deuxième édition)
CSA C22.2 No.60947-4-1-07-CAN/CSA-2007 Low-Voltage Switchgear and Controlgear ?Part 4-1: Contactors and motor-starters ?Electromechanical contactors and motor-starters First Edition

Underwriters Laboratories (UL), Preparation of contact discs

UL 60947-4-1A BULLETIN-2007 UL Standard for Safety for Low-Voltage Switchgear and Controlgear Part 4-1: Contactors and Motor-Starters Electromechanical Contactors and Motor-Starters
UL 60947-4-1 BULLETIN-2005 UL Standard for Safety for Low-Voltage Switchgear and Controlgear Part 4-1: Contactors and Motor-Starters Electromechanical Contactors and Motor-Starters
UL 60947-4-1 BULLETIN-2001 UL Standard for Safety for Low-Voltage Switchgear and Controlgear Part 4-1: Contactors and Motor-Starters Electromechanical Contactors and Motor-Starters
UL 60947-4-1 BULLETIN-2003 UL Standard for Safety for Low-Voltage Switchgear and Controlgear Part 4-1: Contactors and Motor-Starters Electromechanical Contactors and Motor-Starters
UL 60947-4-1 BULLETIN-2015 UL Standard for Safety for Low-Voltage Switchgear and Controlgear Part 4-1: Contactors and Motor-Starters Electromechanical Contactors and Motor-Starters
UL 60947-4-1 BULLETIN-2004 UL Standard for Safety for Low-Voltage Switchgear and Controlgear Part 4-1: Contactors and Motor-Starters Electromechanical Contactors and Motor-Starters
UL 60947-4-1-2004 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
UL 60947-4-1A BULLETIN-2010 UL Standard for Safety Low-Voltage Switchgear and Controlgear Part 4-1: Contactors and Motor-Starters Electromechanical Contactors and Motor-Starters
UL 60947-4-1A BULLETIN-2012 UL Standard for Safety Low-Voltage Switchgear and Controlgear Part 4-1: Contactors and Motor-Starters Electromechanical Contactors and Motor-Starters
UL 60947-4-1 (ND)-2004 National Differences For UL 60947-4-1 Standard for Low-Voltage Switchgear and Controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters (Second Edition)
UL 60947-4-1A (ND)-2007 National Differences For UL 60947-4-1A Low-Voltage Switchgear and Controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters (Second Edition; Reprint with Revisions Through and Including April 29@ 2011)
UL 60947-4-1-2014 UL Standard for Safety Low-Voltage Switchgear and Controlgear �C Part 4-1: Contactors and Motor-Starters �C Electromechanical Contactors and Motor-Starters (Third Edition; Reprint with revisions through and including October 17@ 2017)
UL 60947-4-1 (ND)-2014 National Differences For UL 60947-4-1 Low-Voltage Switchgear and Controlgear - Part 4-1: Contactors and Motor-Starters - Electromechanical Contactors and Motor-Starters (Third Edition; Reprint with Revisions Through and Including October 17@ 2017)
UL 60947-4-1 BULLETINS-2006 UL Standard for Safety for Low-Voltage Switchgear and Controlgear Part 4-1: Contactors and Motor-Starters Electromechanical Contactors and Motor-Starters (11/17/2006 (26p); 08/18/2006 (10p))
UL 60947-4-1 BULLETIN-2017 UL Standard for Safety for Low-Voltage Switchgear and Controlgear Part 4-1: Contactors and Motor-Starters Electromechanical Contactors and Motor-Starters (COMMENTS DUE: September 25@ 2017)
UL 60947-4-1 BULLETIN-2006 UL Standard for Safety for Low-Voltage Switchgear and Controlgear Part 4-1: Contactors and Motor-Starters Electromechanical Contactors and Motor-Starters (COMMENTS DUE: October 02@ 2006)
UL 60947-4-1A BULLETIN-2009 UL Standard for Safety Low-Voltage Switchgear and Controlgear - Part 4-1: Contactors and Motor-Starters - Electromechanical Contactors and Motor-Starters (COMMENTS DUE: March 30@ 2009)
UL 60947-4-1A BULLETIN-2013 UL Standard for Safety Low-Voltage Switchgear and Controlgear Part 4-1: Contactors and Motor-Starters Electromechanical Contactors and Motor-Starters (COMMENTS DUE: June 18@ 2013)
UL 347-2016 UL Standard for Safety Medium-Voltage AC Contactors, Controllers, and Control Centers (Sixth Edition)
UL 60947-4-1A CRD-2007 UL Standard for Safety Low-Voltage Switchgear and Controlgear - Part 4-1: Contactors and Motor-Starters - Electromechanical Contactors and Motor-Starters - Section / Paragraph Reference: Footnote f of Table C.4.4DV.1 (Edition 2: January 26@ 2007)

KR-KS, Preparation of contact discs

KS C IEC 60947-4-1-2022 Low-voltage switchgear and controlgear —Part 4-1: Contactors and motor-starters —Electromechanical contactors and motor-starters
KS C IEC 60947-4-1-2016 Low－voltage switchgear and controlgear－Part 4－1：Contactors and motor－starters－Electromechanical contactors and motor－starters
KS C IEC 62271-106-2019 High-voltage switchgear and controlgear — Part 106: Alternating current contactors, contactor-based controllers and motor-starters
KS C 2507-1980(2022) Electric contact material for electric communication equipment and apparatus

Japanese Industrial Standards Committee (JISC), Preparation of contact discs

JIS C 8201-4-1:2023 Low-voltage switchgear and controlgear -- Part 4-1: Contactors and motor-starters -- Electromechanical contactors and motor-starters
JIS C 8201-4-1:1999 Low-voltage switchgear and controlgear -- Part 4: Contactors and motor-starters, Section 1: Electromechanical contactors and motor-starters
JIS C 8201-5-101:2008 Low-voltage switchgear and controlgear -- Part 5-101: Contactor relays and auxiliary contact for contactors and motor-starters
JIS C 8201-5-10:2001 Low-voltage switchgear and controlgear -- Part 5-10: Contactor relays and auxiliary contact for contactors and motor-starters
JIS C 9313:1991 Control equipments of resistance welding machines for lap joint
JIS C 5402-16-9:2015 Connectors for electronic equipment -- Tests and measurements -- Part 16-9: Mechanical tests on contacts and terminations -- Test 16i: Grounding contact spring holding force
JIS C 9313:2005 Control equipments of resistance welding machines for lap joint
JIS C 5402-16-3:2014 Connectors for electronic equipment -- Tests and measurements -- Part 16-3: Mechanical tests on contacts and terminations -- Test 16c: Contact-bending strength
JIS A 8407:2000 Earth-moving machinery -- Zones of comfort and reach for controls
JIS C 5402-16-7:2012 Connectors for electronic equipment -- Tests and measurements -- Part 16-7: Mechanical tests on contacts and terminations -- Test 16g: Measurement of contact deformation after crimping
JIS C 5402-16-6:2014 Connectors for electronic equipment -- Tests and measurements -- Part 16-6: Mechanical tests on contacts and terminations -- Test 16f: Robustness of terminations
JIS B 0651 ERRATUM 2:2002 Geometrical Product Specification (GPS) -- Surface texture: Profile method -- Nominal characteristics of contact (stylus) instruments (Erratum 2)
JIS D 4419:1986 Test procedure of rusting at material interfaces for disc brake pads of automobiles
JIS R 2207-1:2007 Test methods for thermal expansion of refractory products -- Part 1: Non-contact method

Society of Automotive Engineers (SAE), Preparation of contact discs

SAE J2052-2005 Test Device Head Contact Duration Analysis
SAE AIR1351A-1982 MANUFACTURERS' IDENTIFICATION OF ELECTRICAL CONNECTOR CONTACTS, TERMINALS & SPLICES

IN-BIS, Preparation of contact discs

IS 13947 Pt.4/Sec.1-1993

AT-OVE/ON, Preparation of contact discs

OVE EN IEC 60947-4-1/AC:2021 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters (Corrigendum) (german version)

American National Standards Institute （ANSI), Preparation of contact discs

ANSI/UL 60947-4-1A-2011 Standard for Safety for Low-Voltage Switchgear and Controlgear - Part 4-1: Contactors and Motor-Starters - Electromechanical Contactors and Motor-Starters
ANSI/UL 1559-2003 Standard for Safety for Insect-Control Equipment-Electrocution Type (Bulletin dated October 31, 2003)
ANSI/UL 1559-2012 Standard for Safety for Insect-Control Equipment - Electrocution Type
ANSI/EIA 540DAAA-A:1993 Detail Specification for Dual-in-Line 2-Piece Contact Socket for Use in Electronic Equpiment

United States Navy, Preparation of contact discs

NAVY QPL-2212-QPD-2010 CONTACTORS AND CONTROLLERS, ELECTRIC MOTOR AC OR DC, AND ASSOCIATED SWITCHING DEVICES
NAVY QPL-2212-2010 CONTACTORS AND CONTROLLERS, ELECTRIC MOTOR AC OR DC, AND ASSOCIATED SWITCHING DEVICES
NAVY QPL-2212-QPD-2011 CONTACTORS AND CONTROLLERS, ELECTRIC MOTOR AC OR DC, AND ASSOCIATED SWITCHING DEVICES
NAVY QPL-2212-2012 Contactors and Controllers, Electric Motor AC or DC, and Associated Switching Devices
NAVY QPL-2212-2013 Contactors and Controllers, Electric Motor AC or DC, and Associated Switching Devices

GM Daewoo, Preparation of contact discs

GMKOREA EDS-T-7529-2011 Test Method of PVC Molding Which is in Contact with Glass

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Preparation of contact discs

GB/T 34662-2017 Electrotechnical equipment—Temperatures of touchable hot surfaces

ECIA - Electronic Components Industry Association, Preparation of contact discs

EIA/IS-47-1987 Contact Termination Finish Standard for Surface Mount Devices

NL-NEN, Preparation of contact discs

NEN 10947-4-1-1993 Low-voltage switchgear and controlgear. Part 4: Contactors and motor-starters. Section one: Electromechanical contactors and motor-starters (IEC 947-4-1:1990)

European Telecommunications Standards Institute (ETSI), Preparation of contact discs

ETSI GS E4P 006 V 1.1.1-2021 Europe for Privacy-Preserving Pandemic Protection (E4P) - Device-Based Mechanisms for pandemic contact tracing systems
ETSI GS E4P 006-2021 Europe for Privacy-Preserving Pandemic Protection (E4P); Device-Based Mechanisms for pandemic contact tracing systems (V1.1.1)

国家市场监督管理总局、中国国家标准化管理委员会, Preparation of contact discs

GB/T 14048.4-2020 Low-voltage switchgear and controlgear—Part 4-1: Contactors and motor-starters—Electromechanical contactors and motor-starters (Including motor protector)

检验方法与规程专业（理化）, Preparation of contact discs

GB 31604.39-2016 National food safety standard Determination of polychlorinated biphenyls in food contact paper for food contact materials and products
GB 31604.23-2016 National Food Safety Standards Determination of Diaminotoluene in Food Contact Materials and Products Composite Food Contact Materials

NO-SN, Preparation of contact discs

NS 4814-2007 Acoustics Measurement of occupational noise exposure of workers Area noise measurements and preparation of noise contour line maps

IPC - Association Connecting Electronics Industries, Preparation of contact discs

IPC BP-421-1980 General Specification for Rigid Printed Board Backplanes with Press-Fit Contacts

海关总署, Preparation of contact discs

SN/T 5232-2019 Testing of modified atmosphere packaging of fresh-cut products made of food contact materials

Defense Logistics Agency, Preparation of contact discs

DLA MIL-DTL-38999/47 B-2009 CONNECTORS, ELECTRICAL, CIRCULAR, PLUG, BREECH COUPLING, REMOVABLE CRIMP CONTACTS, SERIES IV, METRIC
DLA DSCC-DWG-86037 REV A-2002 CONNECTORS, RECEPTACLE, ELECTRICAL, LATCH HOUSINGS, CRIMP TO WIRE CONTACTS, GENERAL DRAWING FOR
DLA MIL-DTL-38999/45 B-2010 CONNECTORS, ELECTRICAL, CIRCULAR, RECEPTACLE, SOLDER MOUNTING, HERMETIC, BREECH COUPLING, HERMETIC SOLDER CONTACTS, SERIES IV, METRIC
DLA MIL-DTL-38999/42 B-2009 CONNECTORS, ELECTRICAL, CIRCULAR, RECEPTACLE, BOX MOUNTING FLANGE, BREECH COUPLING, REMOVABLE CRIMP CONTACTS, SERIES IV, METRIC
DLA MIL-DTL-38999/44 D-2009 CONNECTORS, ELECTRICAL, CIRCULAR, RECEPTACLE, JAM-NUT MOUNTING, BREECH COUPLING, REMOVABLE CRIMP CONTACTS, SERIES IV, METRIC
DLA MIL-DTL-38999/44 D (1)-2011 CONNECTORS, ELECTRICAL, CIRCULAR, RECEPTACLE, JAM-NUT MOUNTING, BREECH COUPLING, REMOVABLE CRIMP CONTACTS, SERIES IV, METRIC

Professional Standard - Electron, Preparation of contact discs

SJ 51717/2-1994 Detail specification for connectors for printed circuit board(2.54mm spacing),Type Cy4
SJ 51438.6-1995 Connectors,receptacal type PM24,for printed circuit(1.905mm spacing),detail specification for
SJ 51438/3-1995 Connectors,receptacal type PM25,for printed circuit(1.905mm spacing),detail specification for
SJ 51438/5-1995 Connectors,plug type PM23,for printed circuit(1.905mm spacing),detail specification for
SJ 51717/1-1994 Detail specification for fixed connectors for printed circuit board(3.96mm spacing),Type CY2

Group Standards of the People's Republic of China, Preparation of contact discs

T/SAFCM 031-2021 Determination of Migration of 1- Hexene in Food Contact Materials and Products
T/SAFCM 034-2021 Determination of Migration ofIsophthalic Acidin Food Contact Materials and Products
T/SAFCM 035-2021 Determination of Toluene-Extractable Material in Carbon Black in Food Contact Materials and its Products
T/GDBZ 002-2020 Determination of migration of 4,4'-biphenol in food contact materials and products
T/NAIA 30-2021 Determination of migration of isophthalic acid in food contact materials and products
T/YNZJ 001-2021 Determination of migration of isophthalic acid in food contact materials and products
T/GDAQI 004-2018 Food Safety Standard of food contact materials and products Determination of nonylphenol and its migration quantity

Hunan Provincial Standard of the People's Republic of China, Preparation of contact discs

DB43/T 2649-2023 Determination of 1-hexene migration in food contact materials and products

US-3-A, Preparation of contact discs

3-A 84-02-2007 3-A Santitary Standards for Personnel Access Ports for Wet Applications,Number 84-02

CEN - European Committee for Standardization, Preparation of contact discs

EN ISO 8442-1:1997 Materials and Articles in Contact with Foodstuffs - Cutlery and Table Holloware - Part 1: Requirements for Cutlery for the Preparation of Food

HU-MSZT, Preparation of contact discs

Electronic Components, Assemblies and Materials Association, Preparation of contact discs

ECA 540DAAA-A-1994 Detail Specification for Dual In-Line Two-Piece Contact Socket for Use in Electronic Equipment

NEMA - National Electrical Manufacturers Association, Preparation of contact discs

NEMA TS 2 AMD 3-2009 Traffic Controller Assemblies with NTCIP Requirements - Contactor Amendment (Version 02.06)

Association of German Mechanical Engineers, Preparation of contact discs

VDI/VDE/DGQ 2618 Blatt 13.2-2005 Inspection of measuring and test equipment - Test instruction for bore gauges with 2-point contact

TH-TISI, Preparation of contact discs

TIS 32-1985(en) CERAMIC WARE IN CONTACT WITH FOOD : PERMISSIBLE LIMITS AND METHOD OF TEST FOR LEAD AND CADMIUM