ZH
RU
ES

contact plate preparation

contact plate preparation, Total:497 items.

In the international standard classification, contact plate preparation involves: Materials and articles in contact with foodstuffs, Kitchen equipment, Electrical accessories, Semiconductor devices, Switchgear and controlgear, Testing of metals, Paper and board, Protection against electric shock, Components for electrical equipment, Lamps and related equipment, Printed circuits and boards, Surface treatment and coating, Welding, brazing and soldering, Packaging materials and accessories, Medical equipment, Fibre optic communications, Electric traction equipment, Miscellaneous domestic and commercial equipment, Railway rolling stock, Plastics, Reinforced plastics, Aerospace electric equipment and systems, Electromechanical components for electronic and telecommunications equipment, Paper products, Non-ferrous metals, Installations in buildings, Earth-moving machinery, Cereals, pulses and derived products, Electrical engineering in general, Conducting materials, Industrial automation systems, Gears, Electrical wires and cables, Law. Administration, Accident and disaster control, Special purpose vehicles, Photography, Freight distribution of goods, Bottles. Pots. Jars, Linear and angular measurements, Food products in general, Equipment for railway/cableway construction and maintenance, Road vehicle systems, Commercial vehicles, Products of non-ferrous metals, Vocabularies, Sports equipment and facilities.

German Institute for Standardization, contact plate preparation

DIN EN ISO 8442-8:2001 Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 8: Requirements for silver table and decorative holloware (ISO 8442-8:2000); German version EN ISO 8442-8:2000
DIN EN ISO 8442-7:2001 Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 7: Requirements for table cutlery made of silver, other precious metals and their alloys (ISO 8442-7:2000); German version EN ISO 8442-7:2000
DIN EN ISO 8442-6:2001 Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 6: Lightly silver plated table holloware protected by lacquer (ISO 8442-6:2000); German version EN ISO 8442-6:2000
DIN EN 645:1994 Paper and board intended to come into contact with foodstuffs; preparation of a cold water extract; German version EN 645:1993
DIN EN 647:1994 Paper and board intended to come into contact with foodstuffs; preparation of a hot water extract; German version EN 647:1993
DIN EN 645:1994-01 Paper and board intended to come into contact with foodstuffs; preparation of a cold water extract; German version EN 645:1993
DIN EN 647:1994-01 Paper and board intended to come into contact with foodstuffs; preparation of a hot water extract; German version EN 647:1993
DIN EN 15519:2008-01 Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract; German version EN 15519:2007
DIN 42802:1989 Connector, touch proof, for electromedial application
DIN EN ISO 11978:2000 Ophthalmic optics - Contact lenses and contact lens care products - Information supplied by the manufacturer (ISO 11978:2000); German version EN ISO 11978:2000
DIN EN 62271-106:2012 High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters (IEC 62271-106:2011); German version EN 62271-106:2011
DIN 41620-1:1970-09 Connectors for printed boards (flat contacts, single row); edge socket connectors-edge board contacts
DIN EN 14481:2003-09 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact; German version EN 14481:2003
DIN EN 60947-4-3:2007 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads (IEC 60947-4-3:1999 + A1:2006); German version EN 60947-4-3:2000 + A1:2006
DIN EN 60947-4-3:2015 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads (IEC 60947-4-3:2014); German version EN 60947-4-3:2014
DIN EN 15519:2008 Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract; German version EN 15519:2007
DIN EN 60947-4-1:2011 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters (IEC 60947-4-1:2009); German version EN 60947-4-1:2010
DIN EN 60512-2-5:2004 Connectors for electronic equipment - Tests and measurements - Part 2-5: Electrical continuity and contact resistance tests - Test 2e: Contact disturbance (IEC 60512-2-5:2003); German version EN 60512-2-5:2003
DIN EN 60512-2-5:2004-01 Connectors for electronic equipment - Tests and measurements - Part 2-5: Electrical continuity and contact resistance tests - Test 2e: Contact disturbance (IEC 60512-2-5:2003); German version EN 60512-2-5:2003 / Note: DIN IEC 60512-2 (1994-05) remains ...
DIN EN IEC 60947-4-1 Berichtigung 1:2021 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters (IEC 60947-4-1:2018/COR1:2020); German version EN IEC 60947-4-1:2019/AC:2020-05
DIN EN IEC 60947-4-1 Berichtigung 2:2021 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters (IEC 60947-4-1:2018/COR2:2021); German version EN IEC 60947-4-1:2019/AC:2021-04
DIN 10955:2023-10 Sensory analysis - Testing of food contact materials and articles (FCM)
DIN EN 60947-4-2:2007 Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters (IEC 60947-4-2:1999 + A1:2001 + A2:2006); German version EN 60947-4-2:2000 + A1:2002 + A2:2006
DIN EN 60947-4-3:2012 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads (IEC 60947-4-3:1999 + A1:2006 + A2:2011); German version EN 60947-4-3:2000 + A1:2006 + A2:2011
DIN EN 50042:1982 Low voltage switchgear and controlgear for industrial use; terminal marking; terminals for external associated electronic circuit components and contacts
DIN 30722-1:2007 Roller contact tipper vehicles, roller containers - Part 1: Roller contact tipper vehicles up to 26 t, roller containers type 1570 made from steel
DIN 30722-2:2015 Roller contact tipper vehicles, roller containers - Part 2: Roller contact tipper vehicles up to 32 t, roller containers type 1570 made from steel
DIN 30722-1:2015 Roller contact tipper vehicles, roller containers - Part 1: Roller contact tipper vehicles up to 26 t, roller containers type 1570 made from steel
DIN 30722-2:2007 Roller contact tipper vehicles, roller containers - Part 2: Roller contact tipper vehicles up to 32 t, roller containers type 1570 made from steel
DIN EN ISO 8442-1:1998-03 Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 1: Requirements for cutlery for the preparation of food (ISO 8442-1:1997); German version EN ISO 8442-1:1997
DIN EN 50011:1978-05 Low-voltage Switchgear and Controlgear for Industrial Use; Terminal Marking, Distinctive Number and Distinctive Letter for Particular Contactor Relays
DIN EN 62019:2006 Electrical accessories - Circuit-breakers and similar equipment for household use - Auxiliary contact units (IEC 62019:1999 + A1:2002); German version EN 62019:1999 + A1:2003 + A11:2005
DIN EN 14392:2008 Aluminium and aluminium alloys - Requirements for anodised products for use in contact with foodstuff; English version of DIN EN 14392:2008-01
DIN 17122:1978 Steel Conductor Contact Rails for Electric Traction; Technical Conditions of Delivery
DIN EN 1900:1998-10 Materials and articles in contact with foodstuffs - Non-metallic tableware - Terminology; German version EN 1900:1998

European Committee for Electrotechnical Standardization（CENELEC）, contact plate preparation

HD 419-1982 Low-Voltage Switchgear and Controlgear Contactors
EN IEC 62271-106:2021 High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters
EN 62271-106:2011 High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters
EN 50274:2002 Low-Voltage Switchgear and Controlgear Assemblies - Protection Against Electric Shock - Protection Against Unintentional Direct Contact with Hazardous Live Parts
EN 60947-4-3:2014 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
EN 60947-4-1:2010 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters (Incorporates Amendment A1: 2012)
FprEN IEC 60947-4-3:2020 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - Semiconductor controllers and semiconductor contactors for non-motor loads
HD 420-1982 Control Switches (Low Voltage-Devices for Control and Auxiliary Circuits, Including Contactor Relays)
HD 420 S2-1988 Control Switches (Low Voltage Switching - Devices for Control and Auxiliary Circuit, Including Contactor Relays)
EN 60947-4-3:2000 Low-Voltage Switchgear and Controlgear Part 4.3: Contactors and Motor-Starters AC Semiconductor Controllers and Contactors for Non-Motor Loads Incorproates Amendment A1: December 2006 [: CENELEC HD 419.2 S1]
EN 50013:1977 Low voltage switchgear and controlgear for industrial use Terminal marking and distinctive number for particular control switches
HD 419.3 S1-1988 Low-Voltage Controlgear Part 3: Additional Requirements for Contactors Subject to Certification
EN 60947-4-2:2012 Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters
EN IEC 60947-4-2:2023 Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - Semiconductor motor controllers, starters and soft-starters
EN 50011:1977 Low voltage switchgear and controlgear for industrial use Terminal marking, distinctive number and distinctive letter for particular contactor relays
EN 60512-2-5:2003 Connectors for electronic equipment - Tests and measurements Part 2-5: Electrical continuity and contact resistance tests - Test 2e: Contact disturbance

CZ-CSN, contact plate preparation

CSN 35 4102-1997 Low-voltage controlgear Part 2: Semiconductor contactors (solid state contactors)
CSN 34 2855-1972 Suppresion of radio interference caused by contact devices
CSN 35 4055 Cast.4-1984 Electromechanical components for electronic equipment. Contact resistance variation
CSN 35 4055 Cast.74-1987 Electromechanical components for electronic equipment. Gauge retention force (resilient contacts)

European Committee for Standardization (CEN), contact plate preparation

HD 419.2 S1-1987 Low-voltage controlgear; part 2: semiconductor contactors (solid state contactors)
EN 645:1993 Paper and board intended to come into contact with foodstuffs; preparation of a cold water extract
EN 647:1993 Paper and board intended to come into contact with foodstuffs; preparation of a hot water extract
prEN 645-1992 Paper and board intended to come into contact with foodstuffs; preparation of a cold water extract
prEN 647-1992 Paper and board intended to come into contact with foodstuffs; preparation of a hot water extract
EN 15519:2007 Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract
EN ISO 9341:1998 Optics and Optical Instruments - Contact Lenses - Determination of Inclusions and Surface Imperfections for Rigid Contact Lenses ISO 9341:1996
EN 60947-4-1:1992 Low-voltage switchgear and controlgear; part 4: contactors and motor-starters; section 1: electromechanical contactors and motor-starters (IEC 947-4-1:1990)

International Electrotechnical Commission (IEC), contact plate preparation

IEC 60158-2:1982 Low-voltage controlgear. Part 2 : Semiconductor contactors (solid state contactors)
IEC 62271-106:2011 High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters
IEC 62271-106:2011/COR1:2014 High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters; Corrigendum 1
IEC 60947-4-3:2011 Low-voltage switchgear and controlgear. Part 4-3: Contactors and motor-starters.AC semiconductor controllers and contactors for non-motor loads
IEC 60947-4-3:1999 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
IEC 60947-4-3/COR1:2000 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads; Corrigendum 1
IEC 60947-4-3:2020 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - Semiconductor controllers and semiconductor contactors for non-motor loads
IEC 60947-4-1:2018 RLV Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
IEC 60947-4-1:2009+AMD1:2012 CSV Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
IEC 60947-4-1/COR1:2001 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters; Electromechanical contactors and motor starters
IEC 60947-4-1:2002 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters; Electromechanical contactors and motor-starters
IEC 60947-4-1:2009 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
IEC 60947-4-1:2000 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters; Electromechanical contactors and motor starters
IEC 60947-4-1:2018/COR1:2020 Corrigendum 1 - Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
IEC 60947-4-1:2018/ISH1:2020 Interpretation sheet 1 - Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
IEC 60947-4-1:2018/COR2:2021 Corrigendum 2 - Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
IEC 60947-4-3:2007 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
IEC 60947-4-1/AMD1:2002 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters; Electromechanical contactors and motor starters; Amendment 1
IEC 60947-4-1:2009/AMD1:2012 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters; Amendment 1
IEC 60947-4-1/AMD1:1994 Low-voltage switchgear and controlgear - Part 4: Contactors and motor-starters - Section 1: Electromechanical contactors and motor-starters; Amendment 1
IEC 60158-3:1985 Low-voltage controlgear. Part 3 : Additional requirements for contactors subject to certification
IEC 62271-106:2021 High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters
IEC 60512-2-5:2003 Connectors for electronic equipment - Tests and measurements - Part 2-5: Electrical continuity and contact resistance tests; Test 2e: Contact disturbance
IEC TS 60201:2007 Use of conventional touch voltage limits - Application guide
IEC TS 61201:2007 Use of conventional touch voltage limits - Application guide
IEC 60512-2-3:2002 Connectors for electronic equipment - Tests and measurements - Part 2-3: Electrical continuity and contact resistance tests; Test 2c: Contact resistance variation
IEC 60947-4-2/COR1:2002 Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters; Corrigendum 1
IEC 60947-4-2/AMD1/COR1:2002 Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters; Corrigendum 1
IEC TR2 60947-5-4:1996 Low-voltage switchgear and controlgear - Part 5: Control circuit devices and switching elements - Section 4: Method of assessing the performance of low-energy contacts - Special tests
IEC 60947-4-2:2011 Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters
IEC 60512-2-1:2002 Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests; Test 2a: Contact resistance - Millivolt level method
IEC 60947-4-1/AMD2:2005 Amendment 2 - Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
IEC 60947-4-2:2007 Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters
IEC 60947-4-2:2020 Low-voltage switchgear and controlgear – Part 4-2: Contactors and motor-starters – Semiconductor motor controllers, starters and soft-starters
IEC 60130-11A:1975 Connectors for frequencies below 3 MHz. Part 11 : Edge socket connectors with closed ends and having a contactspacing of 2.55 mm (0.1 in) mating either with board mounted connectors or printed wiring boards with edge board contacts. First supplement: Mult
IEC 62019:1999 Electrical accessories - Circuit-breakers and similar equipment for household use - Auxiliary contact units
IEC 60130-11:1971 Connectors for frequencies below 3 MHz. Part 11 : Edge socket connectors with closed ends and having a contactspacing of 2.55 mm (0.1 in) mating either with board mounted connectors or printed wiring boards with edge board contacts

British Standards Institution (BSI), contact plate preparation

BS EN 62271-106:2011 High-voltage switchgear and controlgear. Alternating current contactors, contactor-based controllers and motor-starters
BS EN IEC 60947-4-1:2019 Low-voltage switchgear and controlgear - Contactors and motor-starters. Electromechanical contactors and motor-starters
BS EN IEC 62271-213:2021 High-voltage switchgear and controlgear. Alternating current contactors, contactor-based controllers and motor-starters
BS EN IEC 62271-106:2021 High-voltage switchgear and controlgear. Alternating current contactors, contactor-based controllers and motor-starters
BS EN 60947-4-1:2010 Low-voltage switchgear and controlgear - Contactors and motor-starters - Electromechanical contactors and motor-starters
BS EN 60947-4-3:2000+A2:2011 Low-voltage switchgear and controlgear. Contactors and motor-starters. AC semiconductor controllers and contactors for non-motor loads
BS EN 60947-4-3:2014 Low-voltage switchgear and controlgear. Contactors and motor-starters. AC semiconductor controllers and contactors for non-motor loads
20/30402666 DC BS EN 50696. Contact Interface for Automated Connection Device
18/30378901 DC BS EN 62271-106. High-voltage switchgear and controlgear. Part 106. Alternating current contactors; contactor-based controllers and motor-starters
22/30451630 DC BS EN 60947-4-1. Low-voltage switchgear and controlgear - Part 4-1. Contactors and motor-starters. Electromechanical contactors and motor-starters
18/30383448 DC BS EN 60947-4-3. Low-voltage switchgear and controlgear. Part 4-3. Contactors and motor-starters. Semiconductor controllers and semiconductor contactors for non-motor loads
18/30375223 DC BS EN 60947-4-3. Low-voltage switchgear and controlgear. Part 4-3. Contactors and motor-starters. Semiconductor controllers and semiconductor contactors for non-motor loads
BS EN 15519:2007 Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract
BS EN ISO 11978:2000 Ophthalmic optics - Contact lenses and contact lens care products - Information supplied by the manufacturer
BS EN 60512-2-3:2002 Connectors for electronic equipment - Tests and measurements - Electrical continuity and contact resistance tests - Test 2c - Contact resistance variation
BS ISO 1268-2:2001 Fibre-reinforced plastics - Methods of producing test plates - Contact and spray-up moulding
BS EN 60947-4-2:2012 Low-voltage switchgear and controlgear. Contactors and motor-starters. AC semiconductor motor controllers and starters
BS EN IEC 60947-4-2:2023 Low-voltage switchgear and controlgear - Contactors and motor-starters. Semiconductor motor controllers, starters and soft-starter
BS EN 60512-2-5:2003 Connectors for electronic equipment - Tests and measurements - Test 2e - Contact disturbance
BS EN 60512-2-2:2003 Connectors for electronic equipment - Tests and measurements - Electrical continuity and contact resistance tests - Test 2b - Contact resistance - Specified test current method
BS EN 61076-6:2004 Connectors for electronic equipment - Loose part contacts - Sectional specification
BS EN 60512-2-1:2002 Connectors for electronic equipment - Tests and measurements - Electrical continuity and contact resistance tests - Test 2a - Contact resistance - Millivolt level method
BS 5582:1978 Specification for low voltage switchgear and controlgear for industrial use - Terminal marking and distinctive number for auxiliary contacts of particular contactors
BS AU 138b:2000 Towing vehicle, trailer and semi-trailer pneumatic braking systems - "Contact" type couplings
BS EN 60512-16-9:2008 Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Test 16i. Grounding contact spring holding force
BS EN 60947-4-1:2010+A1:2012 Low-voltage switchgear and controlgear. Contactors and motor-starters. Electromechanical contactors and motor-starters
BS EN ISO 8442-1:1998 Materials and articles in contact with foodstuffs. Cutlery and table holloware. Requirements for cutlery for the preparation of food
BS EN 60947-4-3:2000 Low-voltage switchgear and controlgear - Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
BS EN 60512-16-7:2008 Connectors for electronic equipment – Tests and measurements –– Part 16-7: Mechanical tests on contacts and terminations – Test 16g: Measurement of contact deformation after crimping

未注明发布机构, contact plate preparation

BS 5424-2:1987(1999) Low - voltage controlgear — Part 2 : Specification for semiconductor contactors (solid state contactors)
BS EN 645:1994(1999) Paper and board intended to come into contact with foodstuffs — Preparation of a cold water extract
BS EN 647:1994(1999) Paper and board intended to come into contact with foodstuffs — Preparation of a hot water extract
BS EN IEC 60947-4-1:2019(2021) Low - voltage switchgear and controlgear Part 4 - 1 : Contactors and motor - starters — Electromechanical contactors and motor - starters
BS 5582:1978(1999) Specification for Low voltage switchgear and controlgear for industrial use — Terminal marking and distinctive number for auxiliary contacts of particular contactors
DIN EN 50012:1978 Low voltage switchgear and controlgear for industrial use — terminal marking and distinctive number; for auxiliary contacts of particular contactors
BS EN 50274:2002(2010) Low - voltageswitchgear and controlgear assemblies — Protection against electric shock — Protection against unintentional direct contact with hazardous live parts

IT-UNI, contact plate preparation

UNI 3137-1965 Microscopic examination of ferrous materials. Cutting of samples and specimens, preparaton and etching of specimens (etching reagents).
UNI 3138-1965
UNI 5583-1965 P
UNI 5863-1966
UNI 3489-1954
UNI 3488-1954
UNI 3492-1954
UNI 3491-1954
UNI 3490-1954
UNI 3494-1954
UNI 5862-1966
UNI 3487-1954
UNI 3251-1952
UNI 3594-1955
UNI 3250-1952

Danish Standards Foundation, contact plate preparation

DS/EN IEC 62271-106:2021 High-voltage switchgear and controlgear – Part 106: Alternating current contactors, contactor-based controllers and motor-starters
DS/EN 62271-106:2011 High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters
DS/EN 60947-4-1/A1:2012 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
DS/EN IEC 60947-4-1:2021 Low-voltage switchgear and controlgear – Part 4-1: Contactors and motor-starters – Electromechanical contactors and motor-starters
DS/EN 60947-4-1:2010 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
DS/EN 60947-4-3/A2:2011 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
DS/EN 60947-4-3/A1:2007 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
DS/EN 60947-4-3:2001 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
DS/EN 645:1994 paper and board intended to come into contact with foodstuffs. Preparation of a cold water extract
DS/EN 647:1994 Paper and board intended to come into contact with foodstuffs. Preparation of a hot water extract
DS/EN 60947-4-1/A1:1995 Low-voltage switchgear and controlgear - Part 4: Contactors and motorstarters - Section one: Electromechanical contactors and motor-starters
DS/EN 60947-4-1+Corr.:1994 Low-voltage switchgear and controlgear - Part 4: Contactors and motorstarters - Section one: Electromechanical contactors and motor-starters
DS/EN 15519:2008 Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract
DS/EN 50012:1994 Low voltage switchgear and controlgear for industrial use - Terminal marking and distinctive number for auxiliary contacts of particular contactors
DS/EN 50274:2003 Low-voltage switchgear and controlgear assemblies - Protection against electric shock - Protection against unintentional direct contact with hazardous live parts
DS/EN 14481:2003 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact
DS/IEC 158-1B:1981 Low-voltage controlgear. Part 1: Contactors. Second supplement to Publication 158-1 (1970)
DS/EN 645:1993 Paper and board intended to come into contact ith foodstuffs - Preparation of a cold water xtract
DS/EN 647:1993 Paper and board intended to come into contact with foodstuffs - Preparation of a hot water extract
DS/EN 50011:1994 Low voltage switchgear and controlgear for industrial use - Terminal marking, distinctive number and distinctive letter for particular contactor relays
DS/EN 50042:1994 Low voltage switchgear and controlgear for industrial use - Terminal marking - Terminals for external associated electronic circuit components and contacts
DS/EN 50205:2003 Relays with forcibly guided (mechanically linked) contacts
DS/EN 60512-2-5:2003 Connectors for electronic equipment - Tests and measurements - Part 2-5: Electrical continuity and contact resistance tests - Test 2e: Contact disturbance
DS/EN 60947-4-2:2012 Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters
DS/EN 60512-16-2:2008 Connectors for electronic equipment - Tests and measurements - Part 16-2: Mechanical tests on contacts and terminations - Test 16b: Restricted entry
DS/EN 60512-2-3:2002 Connectors for electronic equipment - Tests and measurements - Part 2-3: Electrical continuity and contact resistance tests - Test 2c: Contact resistance variation
DS/EN 60512-16-9:2008 Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force
DS/EN 60512-2-1:2002 Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method
DS/EN 60512-16-7:2008 Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping
DS/EN 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength
DS/EN 60512-16-18:2008 Connectors for electronic equipment - Tests and measurements - Part 16-18: Mechanical tests on contacts and terminations - Test 16r: Deflection of contacts, simulation
DS/EN 1900:1999 Materials and articles in contact with foodstuffs - Non-metallic tableware - Terminology

Association Francaise de Normalisation, contact plate preparation

NF C64-471-106*NF EN IEC 62271-106:2021 High-voltage switchgear and controlgear - Part 106 : alternating current contactors, contactor-based controllers and motor-starters
NF C64-471-106*NF EN 62271-106:2012 High-voltage switchgear and controlgear - Part 106 : alternating current contactors, contactor-based controllers and motor-starters.
NF EN IEC 60947-4-1:2019 Appareillage à basse tension - Partie 4-1 : contacteurs et démarreurs de moteurs - Contacteurs et démarreurs électromécaniques
NF EN IEC 62271-106:2021 Appareillage à haute tension - Partie 106 : contacteurs, combinés de démarrage à contacteurs et démarreurs de moteurs, pour courant alternatif
NF Q03-088*NF EN 647:1994 Paper and board intended to come into contact with foodstuffs. Preparation of a hot water extract.
NF C63-001-4-1*NF EN IEC 60947-4-1:2019 Low-voltage switchgear and controlgear - Part 4-1 : contactors and motor-starters - Electromechanical contactors and motor-starters
NF EN 645:1994 Papier et carton destinés à entrer en contact avec les denrées alimentaires - Préparation d'un extrait aqueux à froid.
NF EN 647:1994 Papier et carton destinés à entrer en contact avec les denrées alimentaires - Préparation d'un extrait aqueux à chaud.
NF C63-110/A2:2005 Low-voltage switchgear and controlgear - Part 4-1 : contactors and motor-starters - Electromechanical contactors and motor-starters.
NF C63-110:2010 Low-voltage switchgear and controlgear - Part 4-1 : contactors and motor-starters - Electromechanical contactors and motor-starters.
NF C63-110/A1:2012 Low-voltage switchgear and controlgear - Part 4-1 : contactors and motor-starters - Electromechanical contactors and motor-starters
NF Q03-084*NF EN 645:1994 Paper and board intended to come into contact with foodstuffs. Preparation of a cold water extract.
NF Q03-109*NF EN 15519:2007 Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract
NF EN 15519:2007 Papier et carton destinés à entrer en contact avec les denrées alimentaires - Préparation d'un extrait de solvant organique
NF C63-032:1978 Low-voltage switchgear and controlgear for industrial use. Terminal marking and distinctive number for auxiliary contacts of particular contactors.
NF C64-150:1985 A.C. high-voltage switchgear and controlgear. High-voltage alternating current contactors.
NF EN 50274:2002 Ensembles d'appareillage à basse tension - Protection contre les chocs électriques - Protection contre le contact direct involontaire avec des parties actives dangereuses
NF EN 60947-4-3:2014 Appareillage à basse tension - Partie 4-3 : contacteurs et démarreurs de moteurs - Gradateurs et contacteurs à semiconducteurs pour charges, autres que des moteurs, à courant alternatif
NF EN 14481:2003 Matériaux et articles en contact avec les denrées alimentaires - Plastiques - Méthodes d'essai pour la détermination d'un contact gras
NF C63-113:2000 Low-voltage switchgear and controlgear - Part 4-3 : contactors and motor-starters - A.C. semiconductor controllers and contactors for non-motor loads.
NF L58-363:1965 Switchgear for aircraft. Sealed triple pole contactors.
NF D21-314:2023 Matériaux et articles en contact avec les denrées alimentaires - Evaluation d'aptitude au chauffage par micro-ondes des articles en métal et alliage au contact de denrées alimentaires
NF C63-110/A2:1997
NF C63-110/A1:1995
NF C93-400-2-5*NF EN 60512-2-5:2003 Connectors for electronic equipment - Tests and measurements - Part 2-5 : electrical continuity and contact resistance tests - Test 2e : contact disturbance.
NF EN 61076-6:2004 Connecteurs pour équipements électroniques - Partie 6 : pièces de contact des connecteurs électriques - Spécification intermédiaire
NF EN 60947-4-2:2012 Appareillage à basse tension - Partie 4-2 : contacteurs et démarreurs de moteurs - Gradateurs et démarreurs à semiconducteurs de moteurs à courant alternatif
NF EN 62019/A1:2003 Petit appareillage électrique - Disjoncteurs et appareillage similaire pour usages domestiques - Blocs de contacts auxiliaires
NF EN 62019/A11:2005 Petit appareillage électrique - Disjoncteurs et appareillage similaire pour usages domestiques - Blocs de contacts auxiliaires
NF EN 62019/A12:2015 Petit appareillage électrique - Disjoncteurs et appareillage similaire pour usages domestiques - Blocs de contacts auxiliaires
NF EN 62019:1999 Petit appareillage électrique - Disjoncteurs et appareillage similaire pour usages domestiques - Blocs de contacts auxiliaires
NF EN 60512-2-5:2003 Connecteurs pour équipements électroniques - Essais et mesures - Partie 2-5 : essais de continuité électrique et de résistance de contact - Essai 2e : perturbation de contact
NF C63-112*NF EN 60947-4-2:2012 Low-voltage switchgear and controlgear - Part 4-2 : contactors and motor-starters - AC semiconductor motor controllers and starters
NF EN IEC 60947-4-2:2023 Appareillage à basse tension - Partie 4-2 : contacteurs et démarreurs de moteurs - Gradateurs, démarreurs et démarreurs progressifs à semiconducteurs de moteurs
NF C63-474*NF EN 50274:2002 Low-voltage switchgear and controlgear assemblies - Protection against electric shock - Protection against unintentional direct contact with hazardous live parts
NF C93-400-2-3*NF EN 60512-2-3:2002 Connectors for electronic equipment - Tests and measurements - Part 2-3 : electrical continuity and contact resistance tests - Test 2c : contact resistance variation
NF EN 60512-2-3:2002 Connecteurs pour équipements électroniques - Essais et mesures - Partie 2-3 : essais de continuité électrique et de résistance de contact - Essai 2c : variation de la résistance de contact
NF H90-030:1991 SERIES 1 FREIGHT CONTAINERS. INTERFACE CONNECTIONS FOR TANK CONTAINERS.
NF C93-400-2-1*NF EN 60512-2-1:2002 Connectors for electronic equipment - Tests and measurements - Part 2-1 : electrical continuity and contact resistance tests - Test 2a : contact resistance - Millivolt level method
NF EN 60512-2-1:2002 Connecteurs pour équipements électroniques - Essais et mesures - Partie 2-1 : essai de continuité électrique et de résistance de contact - Essai 2a : résistance de contact - Méthode du niveau des millivolts
NF C63-141:1985 Control switches. (low-voltage switching-devices for control and auxiliary circuits, including contactor relays). Part 2 : special requirements for specific types of control switches.

ES-UNE, contact plate preparation

UNE-EN IEC 62271-106:2021 High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters (Endorsed by Asociación Española de Normalización in July of 2021.)
UNE-EN 50274:2003 CORR:2010 Low-voltage switchgear and controlgear assemblies - Protection against electric shock - Protection against unintentional direct contact with hazardous live parts
UNE-EN IEC 60947-4-1:2021/AC:2021-04 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
UNE-EN IEC 60947-4-1:2021 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
UNE-EN 645:1994 ERRATUM:2005 Paper and board intended to come into contact with foodstuffs. Preparation of a cold water extract.
UNE-EN 50003:1973 LOW VOLTAGE SWITCHGEAR END CONTROLGEAR FOR INDUSTRIAL USE. DIMENSIONS. FIXING HOLES OF MOTOR CONTACTORS. (Endorsed by AENOR in September of 1994.)
UNE-EN 50002:1972 LOW VOLTAGE SWITCHGEAR END CONTROLGEAR FOR INDUSTRIAL USE. DIMENSIONS. FIXING HOLES OF CONTACTOR RELAYS. (Endorsed by AENOR in September of 1994.)

AENOR, contact plate preparation

UNE-EN 62271-106:2012 High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters
UNE-EN 60947-4-1:2011/A1:2013 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
UNE-EN 60947-4-1:2011 Low-voltage switchgear and controlgear -- Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
UNE-EN 60947-4-3:2014 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
UNE-EN 645:1994 PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOOD STUFFS. PREPARATION OF A COLD WATER EXTRACT.
UNE 21812:1982 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR FOR INDUSTRIAL USE. TERMINAL MARKING AND DISTINCTIVE NUMBER FOR AUXILIARY CONTACTS OF PARTICULAR CONTACTORS.
UNE-EN 647:1994 PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS. PREPARATION OF A HOT WATER EXTRACT.
UNE-EN 15519:2008 Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract
UNE-EN 50274:2003 Low-voltage switchgear and controlgear assemblies - Protection against electric shock - Protection against unintentional direct contact with hazardous live parts.
UNE-EN 14481:2004 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact
UNE-EN 60512-2-5:2004 Connectors for electronic equipment - Tests and measurements -- Part 2-5: Electrical continuity and contact resistance tests - Test 2e: Contact disturbance
UNE 21811:1982 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR FOR INDUSTRIAL USE. TERMINAL MARKING, DISTINCTIVE NUMBER LETTER FOR PARTICULAR CONTACTOR RELAYS.
UNE-EN 60947-4-2:2013 Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters
UNE-EN 60512-2-3:2002 Connectors for electronic equipment - Tests and measurements -- Part 2-3: Electrical continuity and contact resistance tests - Test 2c: Contact resistance variation.
UNE-EN 60512-2-1:2002 Connectors for electronic equipment - Tests and measurements -- Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method.
UNE-EN 1900:1999 Materials and articles in contact with foodstuffs - Non-metallic tableware - Terminology

Standard Association of Australia （SAA）, contact plate preparation

AS/NZS IEC 60947.4.1:2015
AS 60947.4.1:2004 Low-voltage switchgear and controlgear - Contactors and motor-starters - Electromechanical contactors and motor-starters
AS/NZS IEC 60947.4.3:2015
AS/NZS 3947.4.1:2001 Low-voltage switchgear and controlgear Part 4.1: Contactors and motor-starters - Electromechanical contactors and motor-starters
AS/NZS 3947.4.3:2000 Low-voltage switchgear and controlgear - Contactors and motor-starters - A.C. semiconductor controllers and contactors for non-motor loads
AS/NZS IEC 60947.4.2:2015
AS 60947.4.2:2004 Low-voltage switchgear and controlgear - Contactors and motor-starters - A.C. semiconductor motor controllers and starters
AS/NZS 62026.2:2001 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Actuator sensor interface

RO-ASRO, contact plate preparation

SR EN 647-1996 Paper and board intented to come into contact with foodstuffs-Preparation of a hot water extract
SR EN 645-1996 Paper and board intended to come into contact with foodstuffs-Preparation of a cold water extract
STAS SR EN 60947-4-1-1995 Low-voltage switchgear and controlgear Part 4: Contactors and mo?ors-starters Section one: Electromechanical contactors and motor-starters
STAS 8473-1988 Petroleum equipment JUMPERS OF HOISTING EQUIPMENT Radii of contact surfaces
STAS 12561-1987 Geological investigation equipment JUMPERS FOR HOISTING EQUIPMENT Radii of contact'surfaces
STAS 10624-1988 Electric welding by pressure SPECIFICATIONS FOR MATERIALS USED FOR CONTACT ELECTRODS AND ANCILLARY EQUIPMENTS

SE-SIS, contact plate preparation

SIS SS EN 50 012-1989 Low-voltage switchgear and controlgear for industrial use — Terminal marking and distinctive number for auxiliary contacts ofparticular contactors
SIS SS-ISO 9313:1992 Resistance spot welding equipment — Cooling tubes
SIS SS-ISO 5830:1987 Resistance sp?t welding - Male elec- trode caps
SIS SS-ISO 5830:1986 Resistance sp?t welding - Male elec- trode caps
SIS SS EN 50 042-1989 Low-voltage switchgear and controlgear for industrial use —Terminal marking —Terminals for externa! associated electronic circuit components and contacts
MNC 605-1984 Welding — Preparation of test pieces
MNC 605-1986 Welding — Preparation of test pieces
MNC 605-1990 Welding — Preparation oftestpieces — Summan/

Lithuanian Standards Office , contact plate preparation

LST EN 50274-2003 Low-voltage switchgear and controlgear assemblies. Protection against electric shock. Protection against unintentional direct contact with hazardous live parts
LST EN 50274-2003/AC-2009 Low-voltage switchgear and controlgear assemblies. Protection against electric shock. Protection against unintentional direct contact with hazardous live parts
LST EN IEC 62271-106:2021 High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters (IEC 62271-106:2021)
LST EN 62271-106-2012 High-voltage switchgear and controlgear -- Part 106: Alternating current contactors, contactor-based controllers and motor-starters (IEC 62271-106:2011)
LST EN 647-2001 Paper and board intended to come into contact with foodstuffs - Preparation of a hot water extract
LST EN 60947-4-1-2010 Low-voltage switchgear and controlgear -- Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters (IEC 60947-4-1:2009)
LST EN 645-2001 Paper and board intended to come into contact with foodstuffs - Preparation of a cold water extract
LST EN 15519-2008 Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract
LST EN 60947-4-1-2010/A1-2012 Low-voltage switchgear and controlgear -- Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters (IEC 60947-4-1:2009/A1:2012)
LST EN IEC 60947-4-1/AC:2021 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters (IEC 60947-4-1:2018/COR2:2021)
LST EN 14481-2004 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact
LST EN 60947-4-3-2000/A1-2007 Low-voltage switchgear and controlgear -- Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads (IEC 60947-4-3:1999/A1:2006)
LST EN 60947-4-3-2000/A2-2011 Low-voltage switchgear and controlgear -- Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads (IEC 60947-4-3:1999/A2:2011)
LST EN 60947-4-3-2000 Low-voltage swichgear and controlgear. Part 4: Contactors and motor-starters. Section 3: AC semiconductor controllers and contactors for non-motor load (IEC 60947-4-3:1999)
LST EN 50205-2003 Relays with forcibly guided (mechanically linked) contacts
LST EN 60512-2-5-2004 Connectors for electronic equipment. Tests and measurements. Part 2-5: Electrical continuity and contact resistance tests. Test 2e: Contact disturbance (IEC 60512-2-5:2003)
LST EN 50011-2001 Low-voltage switchgear and controlgear for industrial use. Terminal marking, distinctive number and distinctive letter for particular contactor relays
LST EN 60947-5-4-2004 Low-voltage switchgear and controlgear. Part 5-4: Control circuit devices and switching elements. Method of assessing the performance of low-energy contacts. Special tests (IEC 60947-5-4:2002)
LST EN 1900-2003 Materials and articles in contact with foodstuffs - Non-metallic tableware - Terminology

PL-PKN, contact plate preparation

PN-EN IEC 62271-106-2021-09 E High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor-starters (IEC 62271-106:2021)
PN T06001-1960 Telecommunicotion equipnnent. Con?oct rive?s
PN Z08206-1988 Labour protection Not-contacting protective for manufacturing machines and e?uipment General re?uirements
PN E06150-41-1992 Low-voltage switchgear and controlgear Contactors and motor-starters
PN-EN IEC 60947-4-1-2019-05/AC-2021-06 E Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters (IEC 60947-4-1:2018/COR2:2021)
PN M42374-1986 Indycating common manometrie hermometers with contact e?uipment

RU-GOST R, contact plate preparation

GOST 26430-1985 Non-contact route switchgears (controlgears). General technical requirements
GOST EN 50274-2012 Low-voltage switchgear and controlgear assemblies. Protection against electric shock. Protection against unintentional direct contact to hazardous live parts
GOST IEC 60947-4-3-2014 Low-voltage switchgear and controlgear. Part 4-3. Contactors and motor starters. AC semiconductor controllers and contactors for non-motor loads
GOST R 50030.4.1-2002 Low-voltage switchgear and controlgear. Part 4-1. Contactors and motor-starters. Electromechanical contactors and motor-starters
GOST IEC 60974-7-2015 Arc welding equipment. Part 7. Toches
GOST 31374-2009 Connection brake pipe with electrocontact 369A. Specifications
GOST 30011.4.1-1996 Low-voltage switchgear and controlgear. Part 4. Contactors and motor-starters. Section 1. Electromechanical contactors and motor-starters
GOST 3884-1977 Contacts for electrical comutation apparates. Construction and dimensions
GOST 33346-2015 Polymer composites. Production of plates by contact and spray-up moulding for preparation of test specimens
GOST 32679-2014 Contact line for railway. Technical requirements and control methods
GOST 24606.3-1982 Switching and mocenting components, and electrical connectors. Methods of measurement of contact resistance, and dynamic and static instability of contact transient resistance
GOST 30220-1995 Manipulators for contact spot welding. Types, basic parameters and dimensions
GOST 33944-2016 Railway overhead contact line. Technical requirements and control methods
GOST 2584-1986 Copper and copper alloys trolley wires. Specifications
GOST 3899-1981 Transducers with electric contacts for control of linear dimensions. Specifications

Korean Agency for Technology and Standards (KATS), contact plate preparation

KS C IEC 60947-4-1:2003 Low-voltage switchgear and controlgear-Part 4-1:Contactors and motor-starters-Electromechanical contactors and motor-starters
KS C ISO 9313:2001 Resistance spot welding equipment-Cooling tubes
KS C ISO 9313:2016 Resistance spot welding equipment－Cooling tubes
KS C IEC 60947-4-3-2012(2022) Low-voltage switchgear and controlgear－Part 4-3：Contactors and motor-starters－AC semiconductor controllers and contactors for non-motor loads
KS C IEC 60947-4-3-2012(2017) Low-voltage switchgear and controlgear－Part 4-3：Contactors and motor-starters－AC semiconductor controllers and contactors for non-motor loads
KS C IEC 60947-4-1:2022 Low-voltage switchgear and controlgear —Part 4-1: Contactors and motor-starters —Electromechanical contactors and motor-starters
KS C IEC 60947-4-1-2016(2021) Low－voltage switchgear and controlgear－Part 4－1：Contactors and motor－starters－Electromechanical contactors and motor－starters
KS C IEC 60947-4-1:2016 Low－voltage switchgear and controlgear－Part 4－1：Contactors and motor－starters－Electromechanical contactors and motor－starters
KS B ISO 11978:2005 Ophthalmic optics－Contact lenses and contact lens care products－Information supplied by the manufacturer
KS C 2507-1980(2017) Electric contact material for electric communication equipment and apparatus
KS B ISO 6682-2015(2020) Earth-moving machinery — Zones of comfort and reach for controls
KS C IEC 62271-106:2019 High-voltage switchgear and controlgear — Part 106: Alternating current contactors, contactor-based controllers and motor-starters
KS C IEC 60512-2-3:2008 Connectors for electronic equipment-Tests and measurements-Part 2-3:Electrical continuity and contact resistance tests-Test 2c:Contact resistance variation
KS C IEC 60512-2-3:2014 Connectors for electronic equipment-Tests and measurements-Part 2-3:Electrical continuity and contact resistance tests-Test 2c:Contact resistance variation
KS C IEC 60512-2-1:2008 Connectors for electronic equipment-Tests and measurements-Part 2-1:Electrical continuity and contact resistance tests-Test 2a:contact resistance-Millivolt level method
KS C IEC 60512-2-1:2014 Connectors for electronic equipment－Tests and measurements－Part 2-1：Electrical continuity and contact resistance tests－Test 2a：contact resistance－Millivolt level method

BE-NBN, contact plate preparation

NBN C 63-158-2-1989 Low-voltage controlgear Semiconductor contactors (solid state contactors)
NBN EN 645-1994 Paper and board intended to come into contact with foodstuffs. Preparation of a cold water extract
NBN EN 647-1994 Paper and board intended to come into contact with foodstuffs. Preparation fo a hot water extract
NBN C 63-012-1973
NBN C 63-158.1 ADD 2-1982
NBN C 63.158.1 ADD 1-1982

GOSTR, contact plate preparation

GOST IEC 60947-4-3-2017 Low-voltage switchgear and controlgear. Part 4-3. Contactors and motor-starters. AC semiconductor controllers and contactors for non-motor loads
GOST R 58322-2018 Overhead contact line for high speed railways. Technical requirements and control methods

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, contact plate preparation

GB/T 13484-1992 Enamelled ware in contact with food
GB/T 13484-2011 Enamelled ware in contact with food
GB/T 14048.12-2006 Low voltage switchgear and controlgear Part 4-3: Contactors and motor starters AC semiconductor controllers and contactors for non motor loads
GB/T 14048.12-2016 Low-voltage switchgear and controlgear Part 4-3: Contactors and motor starters for AC semiconductor controllers and contactors for non-motor loads
GB 14048.4-2003 Low-voltage switchgear and controlgear-Electromechanical contactors and motor-starters
GB 14048.4-1993 Low-voltage switchgear and controlgear. Low-voltage electromechanical contactors and motor starters
GB/T 14808-2016 High-voltage alternating current contactors, contactor-based controllers and motorstarters
GB/T 14048.4-2010 Low-voltage switchgear and controlgear.Part 4-1:Contactors and motor-starters.Electromechanical contactors and motor-starters (Including motor protector)
GB 14048.4-2010 Low-voltage switchgear and controlgear.Part 4-1:Contactors and motor-starters.Electromechanical contactors and motor-starters (Including motor protector)
GB/T 27797.2-2011 Fibre-reinforced plastics.Methods of producing test plates.Part 2:Contact and spray-up moulding
GB/T 30643-2014 General standard for the label of food contact materials and articles
GB 14048.6-1998 Low-voltage switchgear and controlgear. Contactors and motor-starters. Section 2: AC semiconductor motor controllers and starters
GB/T 13485-1992 Standard test method for lead and cadmium released from enamelled ware in contact with food

Professional Standard - Agriculture, contact plate preparation

GB 13484-1992 food contact enamel

AT-ON, contact plate preparation

ONORM EN 29313-1992 Resistance spot welding equipment - Cooling tubes
ONORM EN 645-1994 Paper and board intended to come into contact with foodstuffs. Preparation of a cold water extract
ONORM EN 647-1994 Paper and board intended to come into contact with foodstuffs. Preparation of a hot water extract

International Organization for Standardization (ISO), contact plate preparation

ISO 9313:1989 Resistance spot welding equipment; cooling tubes
ISO 11978:2000 Ophthalmic optics - Contact lenses and contact lens care products - Information supplied by the manufacturer
ISO 9341:1996 Optics and optical instruments - Contact lenses - Determination of inclusions and surface imperfections for rigid contact lenses
ISO 1268-2:2001 Fibre-reinforced plastics - Methods of producing test plates - Part 2: Contact and spray-up moulding

Aerospace Industries Association/ANSI Aerospace Standards, contact plate preparation

AIA/NAS NAS 967-1975 Resistance Spot Welding Equipment 3 Phase (Rev. 3)

Canadian Standards Association (CSA), contact plate preparation

CAN/CSA-C22.2 NO.60947-4-1-2007 Appareillage à basse tension - Partie 4-1 : Contacteurs et démarreurs de moteurs - Contacteurs et démarreurs électromécaniques (deuxième édition)
CSA C22.2 No.60947-4-1-07-CAN/CSA-2007 Low-Voltage Switchgear and Controlgear ?Part 4-1: Contactors and motor-starters ?Electromechanical contactors and motor-starters First Edition

ES-AENOR, contact plate preparation

Underwriters Laboratories (UL), contact plate preparation

UL 60947-4-1-2004 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
UL 60947-4-1A BULLETIN-2010 UL Standard for Safety Low-Voltage Switchgear and Controlgear Part 4-1: Contactors and Motor-Starters Electromechanical Contactors and Motor-Starters
UL 60947-4-1A BULLETIN-2012 UL Standard for Safety Low-Voltage Switchgear and Controlgear Part 4-1: Contactors and Motor-Starters Electromechanical Contactors and Motor-Starters
UL 60947-4-1A BULLETIN-2007 UL Standard for Safety for Low-Voltage Switchgear and Controlgear Part 4-1: Contactors and Motor-Starters Electromechanical Contactors and Motor-Starters
UL 60947-4-1 BULLETIN-2005 UL Standard for Safety for Low-Voltage Switchgear and Controlgear Part 4-1: Contactors and Motor-Starters Electromechanical Contactors and Motor-Starters
UL 60947-4-1 BULLETIN-2001 UL Standard for Safety for Low-Voltage Switchgear and Controlgear Part 4-1: Contactors and Motor-Starters Electromechanical Contactors and Motor-Starters
UL 60947-4-1 BULLETIN-2003 UL Standard for Safety for Low-Voltage Switchgear and Controlgear Part 4-1: Contactors and Motor-Starters Electromechanical Contactors and Motor-Starters
UL 60947-4-1 BULLETIN-2015 UL Standard for Safety for Low-Voltage Switchgear and Controlgear Part 4-1: Contactors and Motor-Starters Electromechanical Contactors and Motor-Starters
UL 60947-4-1 BULLETIN-2004 UL Standard for Safety for Low-Voltage Switchgear and Controlgear Part 4-1: Contactors and Motor-Starters Electromechanical Contactors and Motor-Starters
UL 1559-1987 Insect-control equipment, electrocution type
UL 1559-1995 Insect-control equipment - Electrocution type
UL 1559-2002 UL Standard for Safety Insect-Control Equipment - Electrocution Type Fourth Edition; Reprinted with revisions through and including April 8, 2008
UL 1559-2011 UL Standard for Safety Insect-Control Equipment - Electrocution Type (Fifth Edition; Reprint with revisions through and including March 27, 2015)
UL 347-2009 Medium-voltage AC contactors, controllers, and control centers
UL 60947-4-1A (ND)-2007 National Differences For UL 60947-4-1A Low-Voltage Switchgear and Controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters (Second Edition; Reprint with Revisions Through and Including April 29@ 2011)
UL 60947-4-1-2014 UL Standard for Safety Low-Voltage Switchgear and Controlgear �C Part 4-1: Contactors and Motor-Starters �C Electromechanical Contactors and Motor-Starters (Third Edition; Reprint with revisions through and including October 17@ 2017)
UL 60947-4-1 (ND)-2014 National Differences For UL 60947-4-1 Low-Voltage Switchgear and Controlgear - Part 4-1: Contactors and Motor-Starters - Electromechanical Contactors and Motor-Starters (Third Edition; Reprint with Revisions Through and Including October 17@ 2017)
UL 60947-4-1 (ND)-2004 National Differences For UL 60947-4-1 Standard for Low-Voltage Switchgear and Controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters (Second Edition)
UL 60947-4-1 BULLETINS-2006 UL Standard for Safety for Low-Voltage Switchgear and Controlgear Part 4-1: Contactors and Motor-Starters Electromechanical Contactors and Motor-Starters (11/17/2006 (26p); 08/18/2006 (10p))
UL 60947-4-1A BULLETIN-2013 UL Standard for Safety Low-Voltage Switchgear and Controlgear Part 4-1: Contactors and Motor-Starters Electromechanical Contactors and Motor-Starters (COMMENTS DUE: June 18@ 2013)
UL 347 BULLETIN-2014 UL Standard for Safety Medium-Voltage AC Contactors@ Controllers@ and Control Centers
UL 347 BULLETIN-2011 UL Standard for Safety Medium-Voltage AC Contactors@ Controllers@ and Control Centers
UL 347 BULLETIN-2005 UL Standard for Safety Medium-Voltage AC Contactors@ Controllers@ and Control Centers
UL 347 BULLETIN-2018 UL Standard for Safety Medium-Voltage AC Contactors@ Controllers@ and Control Centers
UL 60947-4-1 BULLETIN-2017 UL Standard for Safety for Low-Voltage Switchgear and Controlgear Part 4-1: Contactors and Motor-Starters Electromechanical Contactors and Motor-Starters (COMMENTS DUE: September 25@ 2017)
UL 60947-4-1 BULLETIN-2006 UL Standard for Safety for Low-Voltage Switchgear and Controlgear Part 4-1: Contactors and Motor-Starters Electromechanical Contactors and Motor-Starters (COMMENTS DUE: October 02@ 2006)
UL 60947-4-1A BULLETIN-2009 UL Standard for Safety Low-Voltage Switchgear and Controlgear - Part 4-1: Contactors and Motor-Starters - Electromechanical Contactors and Motor-Starters (COMMENTS DUE: March 30@ 2009)

KR-KS, contact plate preparation

KS C IEC 60947-4-1-2022 Low-voltage switchgear and controlgear —Part 4-1: Contactors and motor-starters —Electromechanical contactors and motor-starters
KS C IEC 60947-4-1-2016 Low－voltage switchgear and controlgear－Part 4－1：Contactors and motor－starters－Electromechanical contactors and motor－starters
KS C IEC 62271-106-2019 High-voltage switchgear and controlgear — Part 106: Alternating current contactors, contactor-based controllers and motor-starters
KS C IEC 60512-2-3-2008 Connectors for electronic equipment－Tests and measurements－Part 2-3：Electrical continuity and contact resistance tests－Test 2c：Contact resistance variation
KS C 2507-1980(2022) Electric contact material for electric communication equipment and apparatus
KS C IEC 60512-2-1-2008 Connectors for electronic equipment－Tests and measurements－Part 2-1：Electrical continuity and contact resistance tests－Test 2a：contact resistance－Millivolt level method

Japanese Industrial Standards Committee (JISC), contact plate preparation

JIS C 8201-4-1:2023 Low-voltage switchgear and controlgear -- Part 4-1: Contactors and motor-starters -- Electromechanical contactors and motor-starters
JIS C 8201-4-1:1999 Low-voltage switchgear and controlgear -- Part 4: Contactors and motor-starters, Section 1: Electromechanical contactors and motor-starters
JIS C 2509:1965 Electric contact materials for electric communication equipment and apparatus
JIS C 8201-5-101:2008 Low-voltage switchgear and controlgear -- Part 5-101: Contactor relays and auxiliary contact for contactors and motor-starters
JIS C 5402-2-5:2005 Connectors for electronic equipment -- Tests and measurements -- Part 2-5: Electrical continuity and contact resistance tests -- Test 2e: Contact disturbance
JIS C 8201-5-10:2001 Low-voltage switchgear and controlgear -- Part 5-10: Contactor relays and auxiliary contact for contactors and motor-starters
JIS C 5402-2-3:2005 Connectors for electronic equipment -- Tests and measurements -- Part 2-3: Electrical continuity and contact resistance tests -- Test 2c: Contact resistance variation
JIS C 5402-16-9:2015 Connectors for electronic equipment -- Tests and measurements -- Part 16-9: Mechanical tests on contacts and terminations -- Test 16i: Grounding contact spring holding force
JIS C 5402-16-3:2014 Connectors for electronic equipment -- Tests and measurements -- Part 16-3: Mechanical tests on contacts and terminations -- Test 16c: Contact-bending strength

Professional Standard - Light Industry, contact plate preparation

QB/T 1855-1993 Non-contact food enamel products

CH-SNV, contact plate preparation

SN 113 011/2-1980 Tribology Tribocorrosion

Professional Standard - Medicine, contact plate preparation

YY 0902-2013 Contacting far infrared physiotherapy equipment

国家食品药品监督管理总局, contact plate preparation

YY/T 0902-2013 Contact far infrared physiotherapy equipment

VN-TCVN, contact plate preparation

TCVN 6592-4-1-2009 Low-voltage switchgear and controlgear.Part 4-1: Contactors and motor-starters.Electromechanical contactors and motor-starters
TCVN 2360-1978 Ellip soidal dished hedes flanged made of steel for vessels apparatus and boilers.Basic dimensions

CENELEC - European Committee for Electrotechnical Standardization, contact plate preparation

EN 60947-4-1:2001 Low-Voltage Switchgear and Controlgear - Part 4-1: Contactors and Motor-Starters - Electromechanical Contactors and Motor-Starters
EN 50012:1977 Low voltage switchgear and controlgear for industrial use Terminal marking and distinctive number for auxiliary contacts of particular contactors
EN 50205:1997 Relays with Forcibly Guided (Linked) Contacts
EN 50205:2002 Relays with Forcibly Guided (Mechanically Linked) Contacts
EN 60947-4-2:1996 Low-Voltage Switchgear and Controlgear Part 4: Contactors and Motor-Starters Section 2: AC Semiconductor Motor Controllers and Starters

YU-JUS, contact plate preparation

JUS N.K5.014-1987 Low-voltage controlgear. Contactors. Protection of a contactorby a short-circuit protective device
JUS N.K5.010/1-1987 Low-voltage controlgear. Contactors. General reguirements and testing. Additions and amendments
JUS N.K5.058-1988 Low-voltage controlgear. Terminal marking, distinctive number and distinctive letter for particular contactors relays
JUS N.K5.020-1979 Low-voltage controlgear. Contactors. Conventional test circuits for the verification of rated making and breaking capacities
JUS N.K5.011-1979 Low-voltage controlgear. Contactors. Information to begiven by the userwhen conditions for operation in service differ from the standard
JUS N.K5.054-1982 Low voltage control switches. Special requirements for contactor relays

American Society for Testing and Materials (ASTM), contact plate preparation

ASTM F2071-00(2022) Standard Specification for Switch, Position Proximity (Noncontact) or Limit (Mechanical Contact), Fiber-Optic
ASTM B476-90(1995)e1 Standard Specification for General Requirements for Wrought Precious Metal Electrical Contact Materials
ASTM B476-01 Standard Specification for General Requirements for Wrought Precious Metal Electrical Contact Materials
ASTM B476-01(2006) Standard Specification for General Requirements for Wrought Precious Metal Electrical Contact Materials
ASTM B476-01(2012) Standard Specification for General Requirements for Wrought Precious Metal Electrical Contact Materials
ASTM F2071-00(2011) Standard Specification for Switch, Position Proximity (Noncontact) or Limit (Mechanical Contact), Fiber-Optic

IN-BIS, contact plate preparation

IS 13947 Pt.4/Sec.1-1993

AT-OVE/ON, contact plate preparation

OVE EN IEC 60947-4-1/AC:2021 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters (Corrigendum) (german version)

American National Standards Institute （ANSI), contact plate preparation

ANSI/UL 60947-4-1A-2011 Standard for Safety for Low-Voltage Switchgear and Controlgear - Part 4-1: Contactors and Motor-Starters - Electromechanical Contactors and Motor-Starters
ANSI/UL 1559-2003 Standard for Safety for Insect-Control Equipment-Electrocution Type (Bulletin dated October 31, 2003)
ANSI/UL 347a-2009 Standard for Safety for Medium-Voltage AC Contactors, Controllers, and Control Centres
ANSI PH3.200-1987 Photography (Darkroom Equipment) - Contact Printers and Printing Frames - Specifications
ANSI/UL 347-2009 Standard for Medium-Voltage AC Contactors, Controllers, and Control Centres
ANSI/UL 1559-2012 Standard for Safety for Insect-Control Equipment - Electrocution Type

Taiwan Provincial Standard of the People's Republic of China, contact plate preparation

CNS 7579-1984 Contact Ratio of Spur Gears in the 0.5 System
CNS 7580-1984 Sliding Speed at Tooth Tip of Spur Gears in the 0.5 System

Group Standards of the People's Republic of China, contact plate preparation

T/ZZB 3096-2023 Sheet steel enamelled ware in contact with food
T/CEA 0031-2022 Basic requirements for contactless control technology for lifts
T/CNITA 01005-2022 General safety requirements for food contact fiber products
T/CNFIA 162-2022 General Rules for Declaration of Conformity of Food Contact Materials and Articles
T/CXSBX 002-2023 General principles for declaration of conformity of plastic products for food contact
T/SDAQI 029-2021 Evaluation of green product—Glass products for food contact
T/SAFCM 031-2021 Determination of Migration of 1- Hexene in Food Contact Materials and Products

国家铁路局, contact plate preparation

TB/T 3526-2018 Contactors for rolling stock electrical equipment
TB/T 3563-2020 Method for compiling models of electrified railway catenary operating vehicles

Indonesia Standards, contact plate preparation

SNI 04-6202.3-2000 Plugs and socket-outlets and couplers for industrial purposes. Part 3: Particular requirements for plugs, socket outlets, connectors and appliance inlets for use in explosive gas atmospheres
SNI ISO 11978:2010 Ophthalmic optics - Contact lenses and contact lens care products - Information supplied by the manufacturer

NL-NEN, contact plate preparation

NEN 10947-4-1-1993 Low-voltage switchgear and controlgear. Part 4: Contactors and motor-starters. Section one: Electromechanical contactors and motor-starters (IEC 947-4-1:1990)

PT-IPQ, contact plate preparation

NP 2895-1984

国家市场监督管理总局、中国国家标准化管理委员会, contact plate preparation

GB/T 14048.4-2020 Low-voltage switchgear and controlgear—Part 4-1: Contactors and motor-starters—Electromechanical contactors and motor-starters (Including motor protector)
GB/T 40996-2021 Basic information description of food contact materials and articles for purchase and sale

United States Navy, contact plate preparation

NAVY QPL-2212-QPD-2010 CONTACTORS AND CONTROLLERS, ELECTRIC MOTOR AC OR DC, AND ASSOCIATED SWITCHING DEVICES
NAVY QPL-2212-2010 CONTACTORS AND CONTROLLERS, ELECTRIC MOTOR AC OR DC, AND ASSOCIATED SWITCHING DEVICES
NAVY QPL-2212-QPD-2011 CONTACTORS AND CONTROLLERS, ELECTRIC MOTOR AC OR DC, AND ASSOCIATED SWITCHING DEVICES
NAVY QPL-2212-2012 Contactors and Controllers, Electric Motor AC or DC, and Associated Switching Devices
NAVY QPL-2212-2013 Contactors and Controllers, Electric Motor AC or DC, and Associated Switching Devices

General Motors Corporation (GM), contact plate preparation

GM 9985950-1993 Adhesive, Contact, Rubber, Weatherstrip

Society of Automotive Engineers (SAE), contact plate preparation

SAE AS6593-1-1956 AS6593 Switch Contact Screw for Pilot's Control Wheel
SAE AS3070-1-1951 AS3070 Switch Contact Screw for Pilot's Control Wheel
SAE J2052-2005 Test Device Head Contact Duration Analysis
SAE AIR1351A-1982 MANUFACTURERS' IDENTIFICATION OF ELECTRICAL CONNECTOR CONTACTS, TERMINALS & SPLICES

CN-STDBOOK, contact plate preparation

图书 3-9044 Compilation of standards for food contact materials and articles

Professional Standard - Machinery, contact plate preparation

JB/T 8625-1997 Electrostatic precipitator swing contact material level controller

Anhui Provincial Standard of the People's Republic of China, contact plate preparation

DB34/T 2186-2014 Technical specification for quality control of liquor contact materials

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, contact plate preparation

GB/T 34662-2017 Electrotechnical equipment—Temperatures of touchable hot surfaces

ECIA - Electronic Components Industry Association, contact plate preparation

EIA/IS-47-1987 Contact Termination Finish Standard for Surface Mount Devices
EIA-540DAAA-A-1994 Detail Specification for Dual In-Line Two-Piece Contact Socket for Use in Electronic Equipment

GM Daewoo, contact plate preparation

GMKOREA EDS-T-7529-2011 Test Method of PVC Molding Which is in Contact with Glass

检验方法与规程专业（理化）, contact plate preparation

GB 31604.39-2016 National food safety standard Determination of polychlorinated biphenyls in food contact paper for food contact materials and products
GB 31604.23-2016 National Food Safety Standards Determination of Diaminotoluene in Food Contact Materials and Products Composite Food Contact Materials

IETF - Internet Engineering Task Force, contact plate preparation

RFC 8007-2016 Content Delivery Network Interconnection (CDNI) Control Interface / Triggers

European Telecommunications Standards Institute (ETSI), contact plate preparation

ETSI GS E4P 006 V 1.1.1-2021 Europe for Privacy-Preserving Pandemic Protection (E4P) - Device-Based Mechanisms for pandemic contact tracing systems
ETSI TS 102 622-2008 Smart Cards; UICC - Contactless Front-end (CLF) Interface; Host Controller Interface (HCI) V7.2.0; Release 7
ETSI TS 102 622-2016 Smart Cards; UICC - Contactless Front-end (CLF) Interface; Host Controller Interface (HCI) (V13.0.0; Release 13)
ETSI TS 102 622-2012 Smart Cards; UICC - Contactless Front-end (CLF) Interface; Host Controller Interface (HCI) V11.1.0; Release 11
ETSI TS 102 622-2014 Smart Cards; UICC - Contactless Front-end (CLF) Interface; Host Controller Interface (HCI) (V12.1.0; Release 12)

ZA-SANS, contact plate preparation

SANS 60947-4-3:2007 Low-voltage switchgear and controlgear Part 4-3: Contactors and motor-starters - A.C. semiconductor controllers and contactors for non-motor loads

Professional Standard - Commodity Inspection, contact plate preparation

SN/T 2595-2010 Rules for inspection of food contact materials.Cork,wood and bamboo articles

IPC - Association Connecting Electronics Industries, contact plate preparation

IPC BP-421-1980 General Specification for Rigid Printed Board Backplanes with Press-Fit Contacts

海关总署, contact plate preparation

SN/T 5232-2019 Testing of modified atmosphere packaging of fresh-cut products made of food contact materials

Defense Logistics Agency, contact plate preparation

DLA MIL-DTL-38999/46 B VALID NOTICE 1-2013 Connectors, Electrical, Circular, Plug, Breech Coupling, EMI Grounding, Removable Crimp Contacts, Series IV, Metric

ETSI - European Telecommunications Standards Institute, contact plate preparation

TS 102 622-2016 Smart Cards; UICC - Contactless Front-end (CLF) Interface; Host Controller Interface (HCI) (V13.0.0; Release 13)
TS 102 622-2018 Smart Cards; UICC - Contactless Front-end (CLF) Interface; Host Controller Interface (HCI) (V15.0.0; Release 15)
TS 102 622-2013 Smart Cards; UICC - Contactless Front-end (CLF) Interface; Host Controller Interface (HCI) (V12.0.0; Release 12)
TS 102 622-2012 Smart Cards; UICC - Contactless Front-end (CLF) Interface; Host Controller Interface (HCI) (V11.1.0; Release 11)
TS 102 622-2019 Smart Cards; UICC - Contactless Front-end (CLF) Interface; Host Controller Interface (HCI) (V13.1.0; Release 13)
TS 102 622-2009 Smart Cards; UICC - Contactless Front-end (CLF) Interface; Host Controller Interface (HCI) (V7.4.0; Release 7)
TS 102 622-2014 Smart Cards; UICC - Contactless Front-end (CLF) Interface; Host Controller Interface (HCI) (V11.2.0; Release 11)
TS 102 622-2010 Smart Cards; UICC - Contactless Front-end (CLF) Interface; Host Controller Interface (HCI) (V9.1.0; Release 9)
TS 102 622-2011 Smart Cards; UICC - Contactless Front-end (CLF) Interface; Host Controller Interface (HCI) (V9.4.0; Release 9)
TS 102 622-2008 Smart Cards; UICC - Contactless Front-end (CLF) interface; Host Controller Interface (HCI) (Release 7) (V7.0.0)

Professional Standard - Electron, contact plate preparation

SJ 51717/2-1994 Detail specification for connectors for printed circuit board(2.54mm spacing),Type Cy4
SJ 51438.6-1995 Connectors,receptacal type PM24,for printed circuit(1.905mm spacing),detail specification for
SJ 51438/3-1995 Connectors,receptacal type PM25,for printed circuit(1.905mm spacing),detail specification for
SJ 51438/5-1995 Connectors,plug type PM23,for printed circuit(1.905mm spacing),detail specification for

NO-SN, contact plate preparation

NS 4814-2007 Acoustics Measurement of occupational noise exposure of workers Area noise measurements and preparation of noise contour line maps

Hunan Provincial Standard of the People's Republic of China, contact plate preparation

DB43/T 2649-2023 Determination of 1-hexene migration in food contact materials and products