ZH

RU

ES

Sampling of ambient air particulate matter

Sampling of ambient air particulate matter, Total:385 items.

In the international standard classification, Sampling of ambient air particulate matter involves: Air quality, Occupational safety. Industrial hygiene, Vocabularies, Particle size analysis. Sieving, Welding, brazing and soldering, Environmental protection, Raw materials for rubber and plastics, Measurement of fluid flow, Analytical chemistry, Tobacco, tobacco products and related equipment, Radiation measurements, Microbiology.


Association of German Mechanical Engineers, Sampling of ambient air particulate matter

  • VDI 2463 Blatt 7-2014 Particulate matter measurement - Determination of suspended particulate matter and gaseous chemical compounds in ambient air and indoor air - Active sampling via low-volume sampler (LVS)
  • VDI 2463 Blatt 8-2014 Particulate matter measurement - Determination of suspended particulate matter in ambient air and indoor air - Non-fractioning sampling system for low-volume samplers (LVS)
  • VDI 2463 Blatt 4-1976 Particulate matter measurement; Measurement of particulate matter in ambient air; LIB-filter method
  • VDI 2463 Blatt 1-1999 Particulate matter measurement - Gravimetric determination of mass concentration of suspended particulate matter in ambient air - General principles
  • VDI 3867 Blatt 4-2011 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Optical aerosol spectrometer
  • VDI 3867 Blatt 5-2013 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Time-of-flight spectrometer
  • VDI 3867 Blatt 3-2012 Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical mobility spectrometer
  • VDI 3867 Blatt 1-2009 Measurement of particulate matter in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Fundamentals
  • VDI 3867 Blatt 6-2012 Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical Low Pressure Impactor (ELPI)
  • VDI 3867 Blatt 2-2008 Measurement of particulate matter in ambient air - Methods for characterizing test aerosols - Determination of the particle number concentration and particle size distribution - Condensation Particle Counter (CPC)
  • VDI 2267 Blatt 2-1983 Determination of suspended particulates in ambient air; measurement of lead by X-ray fluorescence
  • VDI 4300 Blatt 11-2013 Measurement of indoor air pollution - Measurement strategies for determination of airborne particles in indoor environment - PM2,5-fraction
  • VDI 2267 Blatt 8-2000 Determination of suspended particles in ambient air - Measurement of the mass concentration of mercury - Sampling by sorption as amalgam and determination by atomic absorption spectrometry (AAS) with cold vapour technique
  • VDI 2119-2013 Ambient air measurements - Sampling of atmospheric particles > 2,5 ?m on an acceptor surface using the Sigma-2 passive sampler - Characterisation by optical microscopy and calculation of number settling rate and mass concentration
  • VDI 3869 Blatt 4-2012 Measurement of ammonia in ambient air - Sampling with diffusive samplers - Photometric or ion chromatographic analysis
  • VDI 4203 Blatt 3-2010 Testing of automated measuring systems - Test procedures for point-related ambient air measuring systems for gaseous and particulate air pollutants
  • VDI 3497 Blatt 4-1991 Determination of particulate anions in ambient air; analysis of chloride, nitrate, and sulphate by ion chromatography using single-column-technique after aerosol sampling on PTFE-filters
  • VDI 2463 Blatt 11-1996 Particulate matter measurement - Measurement of mass concentration in ambient air - Filter method; Digitel DHA-80 filter changer
  • VDI 2463 Blatt 8-1982 Particulate matter measurement; measurement of mass concentration in ambient air; standard method for the comparsion of nonfractionating methods
  • VDI 4202 Blatt 1-2010 Performance criteria for performance tests of automated ambient air measuring systems - Point-related measurement methods for gaseous and particulate air pollutants
  • VDI 2463 Blatt 7-1982 Particulate matter measurement; measurement of mass concentration in ambient air; filter method; small filter device GS 050
  • VDI 2267 Blatt 9-2002 Determination of suspended particulates matter in ambient air - Measurement of the mass concentration of mercury - Sampling by sorption as amalgam and determination by atomic fluorescense spectrometry (AFS) with cold vapour technique
  • VDI 3492-2004 Indoor air measurement - Ambient air measurement - Measurement of inorganic fibrous particles - Scanning electron microscopy method
  • VDI 3492-2013 Indoor air measurement - Ambient air measurement - Measurement of inorganic fibrous particles - Scanning electron microscopy method
  • VDI 3497 Blatt 3-1988 Determination of particulate anions in ambient air; analysis of chloride, nitrate, and sulfate by ion chromatography using suppressor technique after aerosol sampling on PTFE-filters
  • VDI 4252 Blatt 2-2004 Measurement of airborne microorganisms and viruses in ambient air - Active sampling of bioaerosols - Separation of airborne mould on gelatine/polycarbonate filters
  • VDI 4252 Blatt 3-2008 Measurement of airborne microorganisms and viruses in ambient air - Active sampling of bioaerosols - Separation of airborne bacteria with impingers using the principle of critical nozzle

TH-TISI, Sampling of ambient air particulate matter

  • TIS 2574-2012 Airborne particulate matter sampling and analysis in workplace environment

Standard Association of Australia (SAA), Sampling of ambient air particulate matter

  • AS/NZS 3580.9.3:2015 Methods for sampling and analysis of ambient air, Method 9.3: Determination of suspended particulate matter — Total suspended particulate matter (TSP) — High volume sampler gravimetric method
  • AS/NZS 3580.9.17:2018 Methods for sampling and analysis of ambient air, Method 9.17: Demonstration of equivalence for ambient particulate matter monitoring methods
  • AS/NZS 3580.10.1:2016 Methods for sampling and analysis of ambient air, Method 10.1: Determination of particulate matter — Deposited matter — Gravimetric method
  • AS 3580.9.7:1990 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM(sub)10(/sub) dichotomous sampler - Gravimetric method
  • AS/NZS 3580.9.7:2009
  • AS 3580.9.10:2017 Methods for sampling and analysis of ambient air, Method 9.10: Determination of suspended particulate matter — PM 2. low volume sampler — Gravimetric method
  • AS 3580.9.9:2017 Methods for sampling and analysis of ambient air, Method 9.9: Determination of suspended particulate matter — PM 10 low volume sampler — Gravimetric method
  • AS/NZS 3580.9.12:2022 Methods for sampling and analysis of ambient air, Method 9.12: Determination of suspended particulate matter — PM2.5 beta attenuation monitors
  • AS/NZS 3580.9.11:2022 Methods for sampling and analysis of ambient air, Method 9.11: Determination of suspended particulate matter — PM10 beta attenuation monitors
  • AS/NZS 3580.10.2:2013
  • AS/NZS 3580.9.6:2015
  • AS/NZS 3580.9.15:2014
  • AS 3580.13.3:1993 Methods for sampling and analysis of ambient air Method 13.3: Determination of fluorides-Total gaseous and acid-soluble airborne particulate fluoride-Sodium acetate coated tube absorption
  • AS/NZS 3580.9.12:2013
  • AS/NZS 3580.13.2:2013
  • AS/NZS 3580.9.11:2008 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM10 beta attenuation monitors
  • AS/NZS 3580.14:2014
  • AS 3853.1:2006 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator?s breathing zone - Sampling of airborne particles
  • AS/NZS 3580.9.14:2013
  • AS 3580.9.8:2001 Methods for sampling and analysis of ambient air Method 9.8: Determination of suspended particulate matter--PM continuous direct mass method using a tapered element oscillating microbalance analyser
  • AS/NZS 3580.9.13:2022 Methods for sampling and analysis of ambient air, Method 9.13: Determination of suspended particulate matter — PM2.5 continuous direct mass method using a tapered element oscillating microbalance monitor
  • AS 3853.2:2006 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator?s breathing zone - Sampling of gases
  • AS 3580.3.1:1990 Methods for sampling and analysis of ambient air - Determination of acid gases - Titrimetric method
  • AS 3580.9.8:2022 Methods for sampling and analysis of ambient air, Method 9.8: Determination of suspended particulate matter — PM10 continuous direct mass method using a tapered element oscillating microbalance analyser
  • AS 3580.8.1:1990 Methods for sampling and analysis of ambient air - Determination of hydrogen sulfide - Automatic intermittent sampling - Gas chromatographic method
  • AS 3580.5.1:2023 Methods for sampling and analysis of ambient air, Method 5.1: Determination of oxides of nitrogen — Direct-reading instrumental method
  • AS 3580.2.2:1990 Methods for sampling and analysis of ambient air - Preparation of reference test atmospheres - Compressed gas method
  • AS 3580.13.1:1993 Methods for sampling and analysis of ambient air - Determination of fluorides - Gaseous and acid-soluble particulate fluorides - Automated, double paper tape sampling
  • AS 3580.13.2:1991 Methods for sampling and analysis of ambient air - Determination of fluorides - Gaseous and acid-soluble particulate fluorides - Manual, double filter paper sampling
  • AS/NZS 3580.9.13:2013
  • AS 2365.7:2006 Methods for sampling and analysis of indoor air - Determination of total suspended particulate matter - Gravimetric method
  • AS 3580.6.1:1990 Methods for sampling and analysis of ambient air - Determination of ozone - Direct-reading instrumental method
  • AS/NZS 3580.9.9:2006 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM(sub)10(/sub) low volume sampler - Gravimetric method
  • AS/NZS 3580.9.10:2006 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM (sub)2.5(/sub) low volume sampler - Gravimetric method
  • AS 3580.9.8:2008 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM10 continuous direct mass method using a tapered element oscillating microbalance analyser
  • AS/NZS 3580.2.2:2016 Methods for sampling and analysis of ambient air, Method 2.2: Preparation of reference test atmospheres — Compressed gas method
  • AS 3580.6.1:2023 Methods for sampling and analysis of ambient air, Method 6.1: Determination of ozone — Direct-reading instrumental method
  • AS/NZS 3580.11.1:2013
  • AS/NZS 3580.15:2014
  • AS 3580.4.1:2023 Methods of sampling and analysis of ambient air, Method 4.1: Determination of sulfur dioxide — Direct reading instrumental method
  • AS/NZS 3580.12.1:2015 Methods for sampling and analysis of ambient air, Method 12.1: Determination of light scattering — Integrating nephelometer method
  • AS 3580.7.1:2023 Methods for sampling and analysis of ambient air, Method 7.1: Determination of carbon monoxide — Direct-reading instrumental method
  • AS 3580.5.1:2011

British Standards Institution (BSI), Sampling of ambient air particulate matter

  • PD ISO/TR 14644-21:2023 Cleanrooms and associated controlled environments. Airborne particle sampling techniques
  • BS PD CEN/TS 16976:2016 Ambient air. Determination of the particle number concentration of atmospheric aerosol
  • 23/30441434 DC BS EN ISO 10882-1. Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator's breathing zone - Part 1. Sampling of airborne particles
  • BS 1747-6:1983 Methods for measurement of air pollution. Sampling equipment used for the determination of gaseous sulphur compounds in ambient air
  • BS PD CEN/TS 17458:2020 Ambient air. Methodology to assess the performance of receptor oriented source apportionment modelling applications for particulate matter
  • BS EN 12341:2014 Ambient air. Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • BS EN 14907:2005 Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
  • BS EN 14907:2005(2010) Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
  • BS ISO 15202-1:2012 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Sampling
  • BS EN 14902:2005 Ambient air quality - Standard method for the measurement of Pb, Cd, AS, and Ni in the PM 10 fraction of suspended particulate matter
  • BS EN 14902:2005(2009) Ambient air quality - Standard method for the measurement of Pb, Cd, AS, and Ni in the PM 10 fraction of suspended particulate matter
  • BS ISO 15202-1:2020 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Sampling
  • BS EN ISO 23861:2022 Tracked Changes. Workplace air. Chemical agent present as a mixture of airborne particles and vapour. Requirements for evaluation of measuring procedures using samplers
  • 22/30443631 DC BS EN 12341. Ambient air. Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • 23/30471670 DC BS EN ISO 10882-2. Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator's breathing zone - Part 2. Sampling of gases
  • BS EN ISO 10882-1:2011 Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator's breathing zone. Sampling of airborne particles
  • BS EN ISO 11665-11:2019 Measurement of radioactivity in the environment. Air: radon-222. Test method for soil gas with sampling at depth
  • 21/30394853 DC BS EN ISO 23861. Workplace air. Chemical agent present as a mixture of airborne particles and vapours. Requirements for evaluation of measuring procedures using samplers
  • BS ISO 11665-11:2016 Measurement of radioactivity in the environment. Air: radon-222. Test method for soil gas with sampling at depth
  • BS PD CEN/TS 16868:2015 Ambient air. Sampling and analysis of airborne pollen grains and fungal spores for allergy networks. Volumetric Hirst method
  • BS EN ISO 14644-1:2015 Tracked Changes. Cleanrooms and associated controlled environments. Classification of air cleanliness by particle concentration
  • BS ISO 14966:2002 Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method
  • DD CEN/TS 16115-1:2011 Ambient air quality. Measurement of bioaerosols - Determination of moulds using filter sampling systems and culture-based analyses
  • 18/30375050 DC BS ISO 14966. Ambient air. Determination of numerical concentration of inorganic fibrous particles. Scanning electron microscopy method
  • BS EN 16413:2014 Ambient air. Biomonitoring with lichens. Assessing epiphytic lichen diversity
  • BS ISO 14644-12:2018 Cleanrooms and associated controlled environments - Specifications for monitoring air cleanliness by nanoscale particle concentration
  • 19/30383008 DC BS ISO 15202-1. Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Part 1. Sampling

Professional Standard - Environmental Protection, Sampling of ambient air particulate matter

  • HJ 93-2013 Specifications and test procedures for PM<下标10> and PM<下标2.5> sampler
  • HJ 93-2013(XG1-2018) Ambient air particulate matter (PM10 and PM2.5) sampler technical requirements and detection methods "No. 1 Amendment"
  • HJ 1263-2022 Ambient air—Determination of total suspended particle —Gravimetric method
  • HJ 1133-2020 Determination of arsenic, selenium, bismuth and antimony in ambient air and exhaust gas particulate matter by atomic fluorescence method
  • HJ 646-2013 Ambient air and stationary source emissions.Determination of gas and particle-phase polycyclic aromatic hydrocarbons with gas chromatography/mass spectrometry
  • HJ 647-2013 Ambient air and stationary source emissions.Determination of gas and particle-phase polycyclic aromatic hydrocarbons.High performance liquid chromatography
  • HJ 691-2014 Ambient air -Sampling technical guideline of semi-volatile organic compounds(SVOCs)
  • HJ/T 368-2007 Technical requirement for environmental protection products. Special orifice flowmeters for total suspended particulate sampler calibration
  • HJ 656-2013 Technical specifications for gravimetric measurement methods for PM<下标2.5> in ambient air
  • HJ 1271-2022 Ambient Air—Determination of formic acid, acetic acid and oxalic acid in particulate matter—Ion chromatography
  • HJ 759-2015 Ambient air-Determination of volatile organic compounds- Collected by specially-prepared canistersand analyzed by gas chromatography/mass spectrometry
  • HJ 949-2018 Technical specification for investigation of permeability coefficient of ambient air particulate matter (PM 2.5 ) in civil buildings
  • HJ 1100-2020 Technical guidelines for automatic monitoring of particulate matter (PM10 and PM2.5) in ambient air by β-ray method
  • HJ 480-2009 Ambient air.Determination of the fluoride.Filter sampling followed by fluorine ion-selective electrode method
  • HJ 955-2018 Determination of fluoride in ambient air by fluoride ion selective electrode method for filter membrane sampling
  • HJ 955 Determination of ambient air fluoride filter membrane sampling fluoride ion selective electrode method
  • HJ 830-2017 Ambient air -Determination of inorganic elements in ambient particle matter- Wavelength dispersive X-ray fluorescence spectroscopy (WD-XRF) method
  • HJ 829-2017 Ambient air -Determination of inorganic elements in ambient particle matter- Energy dispersive X-ray fluorescence spectroscopy (ED-XRF) method
  • HJ 481-2009 Ambient air.Determination of the fluoride.Lime-paper sampling followed by fluorine ion-selective electrode method
  • HJ 800-2016 Ambient air-Determination of the water soluble cations(Li+、Na+、NH4+、K+、Ca2+、Mg2+) from atmospheric particles-Ion chromatography
  • HJ 644-2013 Ambient air.Determination of volatile organic compounds.Sorbent adsorption and thermal desorption/gas chromatography mass spectrometry method
  • HJ 655-2013 Technical specifications for installation and acceptance of ambient air quality continuous automated monitoring system for PM<下标10> and PM<下标2.5>
  • HJ 653-2013 Specifications and test procedures for ambient air quality continuous automated monitoring system for PM<下标10> and PM<下标2.5>
  • HJ 656-2013(XG1-2018) Ambient Air Particulate Matter (PM2.5) Manual Monitoring Method (Gravimetric Method) Technical Specification "No. 1 Amendment"
  • HJ 817-2018 Ambient air particulate matter (PM10 and PM2.5) continuous automatic monitoring system operation and quality control technical specifications
  • HJ 653-2021 Technical requirements and detection methods for continuous automatic monitoring system of ambient air particulate matter (PM10 and PM2.5)
  • HJ 799-2016 Determination of water-soluble anions (F-, Cl-, Br-, NO2-, NO3-, PO43-, SO32-, SO42-) in ambient air particulate matter by ion chromatography
  • HJ 653-2013(XG1-2018) Ambient Air Particulate Matter (PM10 and PM2.5) Continuous Automatic Monitoring System Technical Requirements and Detection Methods "No. 1 Amendment"
  • HJ 655-2013(XG1-2018) Ambient Air Particulate Matter (PM10 and PM2.5) Continuous Automatic Monitoring System Installation and Acceptance Technical Specifications "No. 1 Amendment"

International Organization for Standardization (ISO), Sampling of ambient air particulate matter

  • ISO/DTR 14644-21:2023 Cleanrooms and associated controlled environments — Part 21: Airborne particle sampling techniques
  • ISO/TR 14644-21:2023 Cleanrooms and associated controlled environments — Part 21: Airborne particle sampling techniques
  • ISO/DIS 10882-1 Health and safety in welding and allied processes — Sampling of airborne particles and gases in the operator's breathing zone — Part 1: Sampling of airborne particles
  • ISO 9855:1993 Ambient air; determination of the particulate lead content of aerosols collected on filters; atomic absorption spectrometric method
  • ISO 4219:1979 Air quality; Determination of gaseous sulphur compounds in ambient air; Sampling equipment
  • ISO 20044:2022 Measurement of radioactivity in the environment — Air: aerosol particles — Test method using sampling by filter media
  • ISO 12884:2000 Ambient air - Determination of total (gas- and particle-phase) polycyclic aromatic hydrocarbons - Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analyses
  • ISO 10473:2000 Ambient air - Measurement of the mass of particulate matter on a filter medium - Beta-ray absorption method
  • ISO 10882-1:2001 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles
  • ISO 15593:2001 Environmental tobacco smoke - Estimation of its contribution to respirable suspended particles - Determination of particulate matter by ultraviolet absorbance and by fluorescence
  • ISO 14644-1:2015 Cleanrooms and associated controlled environments - Part 1: Classification of air cleanliness by particle concentration
  • ISO/DIS 10882-2 Health and safety in welding and allied processes — Sampling of airborne particles and gases in the operator's breathing zone — Part 2: Sampling of gases
  • ISO 18144:2003 Environmental tobacco smoke - Estimation of its contribution to respirable suspended particles - Method based on solanesol
  • ISO 14966:2019 Ambient air — Determination of numerical concentration of inorganic fibrous particles — Scanning electron microscopy method
  • ISO 22253:2019 Cigarettes — Determination of nicotine in total particulate matter from the mainstream smoke with an intense smoking regime — Gas-chromatographic method
  • ISO 15202-1:2012 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 1: Sampling
  • ISO 15202-1:2000 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 1: Sampling
  • ISO 14966:2002 Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method
  • ISO/TS 20593:2017 Ambient air - Determination of the mass concentration of tire and road wear particles (TRWP) - Pyrolysis-GC-MS method
  • ISO 11665-11:2016 Measurement of radioactivity in the environment — Air: radon-222 — Part 11: Test method for soil gas with sampling at depth
  • ISO 14966:2002/cor 1:2007 Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method; Technical Corrigendum 1

German Institute for Standardization, Sampling of ambient air particulate matter

  • DIN EN 16450:2017-07 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5); German version EN 16450:2017
  • DIN EN ISO 10882-1:2012-01 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2011); German version EN ISO 10882-1:2011
  • DIN EN ISO 10882-1:2023-06 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO/DIS 10882-1:2023); German and English version prEN ISO 10882-1:2023 / Note: Dat...
  • DIN EN ISO 13138:2012-04 Air quality - Sampling conventions for airborne particle deposition in the human respiratory system (ISO 13138:2012); German version EN ISO 13138:2012
  • DIN ISO 10473:2002-08 Ambient air - Measurement of the mass of particulate matter on a filter medium - Beta-ray absorption method (ISO 10473:2000)
  • DIN ISO 12884:2000 Ambient air - Determination of total (gas and particle phase) polycyclic aromatic hydrocarbons - Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analysis (ISO 12884:2000)
  • DIN CEN/TS 17458:2021-02 Ambient air - Methodology to assess the performance of receptor oriented source apportionment modelling applications for particulate matter; German version CEN/TS 17458:2020
  • DIN EN ISO 10882-1:2023 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO/DIS 10882-1:2023); German and English version prEN ISO 10882-1:2023
  • DIN EN ISO 10882-2:2001-04 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases (ISO 10882-2:2000); German version EN ISO 10882-2:2000
  • DIN EN ISO 10882-2:2023-06 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases (ISO/DIS 10882-2:2023); German and English version prEN ISO 10882-2:2023 / Note: Date of issue 20...
  • DIN EN 14902:2005-10 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter; German version EN 14902:2005
  • DIN EN 14902 Berichtigung 1:2007-01 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter; German version EN 14902:2005, Corrigenda to DIN EN 14902:2005-10; German version EN 14902:2005/AC:2006
  • DIN ISO 2889 Beiblatt 2:2012-08 Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities - Supplement 2: Assessment of the changes in the concentration of aerosol particles due to non-isokinetic sampling
  • DIN EN ISO 23861:2023-02 Workplace air - Chemical agent present as a mixture of airborne particles and vapour - Requirements for evaluation of measuring procedures using samplers (ISO 23861:2022); German version EN ISO 23861:2022
  • DIN EN 14902:2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter; English version of DIN EN 14902
  • DIN EN 16868:2019-09 Ambient air - Sampling and analysis of airborne pollen grains and fungal spores for networks related to allergy - Volumetric Hirst method; German version EN 16868:2019
  • DIN EN 16868:2019 Ambient air - Sampling and analysis of airborne pollen grains and fungal spores for networks related to allergy - Volumetric Hirst method
  • DIN EN 12341:2022 Ambient air - Standard gravimetric measurement method for the determination of the PM or PM mass concentration of suspended particulate matter; German and English version prEN 12341:2022
  • DIN ISO 4219:1990 Air quality; determination of gaseous sulfur compounds in ambient air; sampling equipment; identical with ISO 4219:1979
  • DIN EN 17346:2020-08 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers; German version EN 17346:2020
  • DIN EN 13205-5:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 5: Aerosol sampler performance test and sampler comparison carried out at workplaces; German version EN 13205-5:2014
  • DIN EN 14907:2005 Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter; English version of DIN EN 14907
  • DIN ISO 2889 Beiblatt 1:2012-10 Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities - Supplement 1: Distribution of activity via the diameter of aerosol particles
  • DIN EN ISO 23861:2023 Workplace air - Chemical agent present as a mixture of airborne particles and vapour - Requirements for evaluation of measuring procedures using samplers (ISO 23861:2022)
  • DIN EN 12341:2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter; German version EN 12341:2014
  • DIN EN 13205-1:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1: General requirements; German version EN 13205-1:2014
  • DIN EN 13205-2:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2: Laboratory performance test based on determination of sampling efficiency; German version EN 13205-2:2014
  • DIN CEN/TS 17458:2021 Ambient air - Methodology to assess the performance of receptor oriented source apportionment modelling applications for particulate matter; German version CEN/TS 17458:2020
  • DIN ISO 10473:2002 Ambient air - Measurement of the mass of particulate matter on a filter medium - Beta-ray absorption method (ISO 10473:2000)
  • DIN CEN/TS 16817-2:2016-01*DIN SPEC 33972:2016-01 Ambient air - Monitoring the effects of genetically modified organisms (GMO) - Pollen monitoring - Part 2: Biological pollen sampling using bee colonies; German version CEN/TS 16817-2:2015
  • DIN EN 14902 Berichtigung 1:2007 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter; German version EN 14902:2005, Corrigenda to DIN EN 14902:2005-10; German version EN 14902:2005/AC:2006
  • DIN EN ISO 13138:2012 Air quality - Sampling conventions for airborne particle deposition in the human respiratory system (ISO 13138:2012); German version EN ISO 13138:2012
  • DIN EN 13205-6:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 6: Transport and handling tests; German version EN 13205-6:2014
  • DIN EN ISO 10882-2:2023 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases (ISO/DIS 10882-2:2023); German and English version prEN ISO 10882-2:2023
  • DIN CEN/TS 16115-1:2011-07*DIN SPEC 91221:2011-07 Ambient air quality - Measurement of bioaerosols - Part 1: Determination of moulds using filter sampling systems and culture-based analyses; German version CEN/TS 16115-1:2011

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Sampling of ambient air particulate matter

  • GB/T 15432-1995 Ambient Air--Determination of total suspended particulates--Gravimetric method
  • GB/T 3780.23-2016 Carbon black.Part 23:Sampling and testing of carbon black fugitive emissions or other environmental particulate
  • GB/T 21133-2007 Environmental tobacco smoke.Estimation of its contribution to respirable suspended particles.Method based on solanesol
  • GB/T 21131-2007 Environmental tobacco smoke.Estimation of its contribuion to respirable suspended particles.Determination of particulate matter by ultraviolet absorbance and by fluorescence

KR-KS, Sampling of ambient air particulate matter

  • KS B 5645-2018(2023) Automatic moniters for suspended particulate matter in ambient air
  • KS I ISO 10473-2020 Ambient air — Measurement of the mass of particulate matter on a filter medium — Beta-ray absorption method
  • KS I ISO 4219-2017 Air quality-Determination of gaseous sulphur compounds in ambient air-Sampling equipment
  • KS I ISO 4219-2022 Air quality — Determination of gaseous sulphur compounds in ambient air — Sampling equipment
  • KS I ISO 14644-12-2020 Cleanrooms and associated controlled environments —Part 12: Specifications for monitoring air cleanliness by nanoscale particle concentration

Association Francaise de Normalisation, Sampling of ambient air particulate matter

  • XP X43-058:2007 Ambient air - Determination of crop protection substances (pesticides) in ambient air - Active sampling
  • NF EN 16450:2017 Air ambiant - Systèmes automatisés de mesurage de la concentration de matière particulaire (PM10;PM2,5)
  • NF X43-055:2017 Ambient air - Metrology applied to the measurement of gaseous atmospheric pollutants - Sampling of ambient air and implementation of calibration gases
  • NF X43-261:1988 Qualité de l'air - Air des lieux de travail - Prélèvement à poste fixe et mesurage de la pollution particulaire totale.
  • NF X43-026:1990 Air quality. Ambient air. Determination of lead in airborne particulate. Atomic absorption spectrometry.
  • NF X43-021*NF EN 16450:2017 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10;PM2,5)
  • NF ISO 20044:2023 Mesurage de la radioactivité dans l'environnement - Air : particules d'aérosol - Méthode d'essai utilisant l'échantillonnage par un média filtrant
  • NF ISO 10473:2000 Air ambiant - Mesurage de la masse des matières particulaires sur un milieu filtrant - Méthode par absorption de rayons bêta
  • XP X43-458*XP CEN/TS 17458:2021 Ambient air - Methodology to assess the performance of receptor oriented source apportionment modelling applications for particulate matter
  • NF EN 13205-5:2014 Exposition sur les lieux de travail - Évaluation des performances des dispositifs de prélèvement pour le mesurage des concentrations de particules en suspension dans l'air - Partie 5 : essais de performances des échantillonneurs d'aérosols, réa...
  • NF EN 16868:2019 Air ambiant - Échantillonnage et analyse des grains de pollen en suspension dans l'air et des spores fongiques pour les réseaux relatifs à l'allergie - Méthode volumétrique de Hirst
  • NF EN ISO 14644-1:2016 Salles propres et environnements maîtrisés apparentés - Partie 1 : classification de la propreté particulaire de l'air
  • NF X43-049*NF EN 12341:2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • NF EN 13205-4:2014 Exposition sur les lieux de travail - Évaluation des performances des dispositifs de prélèvement pour le mesurage des concentrations de particules en suspension dans l'air - Partie 4 : essai de performances en laboratoire par comparaison des concen...
  • NF X43-023:1991 Air quality. Ambient atmosphere. Measurement of the concentration of particulate matter suspended in the ambient air. Gravimetric method.
  • NF ISO 11338-1:2005 Émissions de sources fixes - Détermination des hydrocarbures aromatiques polycycliques sous forme gazeuse et particulaire - Partie 1 : échantillonnage
  • NF EN 14902:2005 Qualité de l'air ambiant - Méthode normalisée pour la mesure du plomb, cadmium, de l'arsenic et du nickel dans la fraction MP10 de la matière particulaire en suspension
  • NF M60-760:2017 Nuclear Energy - Measurement of radioactivity in the environment - Air - Sampling of aerosols for measurement of radioactivity in the environment
  • NF X43-026*NF EN 14902:2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter.
  • NF EN ISO 23861:2022 Air des lieux de travail - Agent chimique présent sous forme de mélange de particules en suspension dans l'air et de vapeur - Exigences d'évaluation des procédures de mesure utilisant des dispositifs de prélèvement
  • NF X43-055:2007 Ambient air - Metrology applied to the measurement of gaseous atmospheric pollutants - Sampling of ambient air and implementation of calibration gases.
  • NF EN 12341:2014 Air ambiant - Méthode normalisée de mesurage gravimétrique pour la détermination de la concentration massique MP10 ou MP2,5 de matière particulaire en suspension
  • NF X43-142*NF EN 17346:2020 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive Samplers
  • NF EN 17346:2020 Air ambiant - Méthode normalisée pour la détermination de la concentration en ammoniac au moyen d'échantillonneurs par diffusion
  • NF EN 16339:2013 Air ambiant - Méthode pour la détermination de la concentration du dioxyde d'azote au moyen d'échantillonneurs par diffusion
  • NF EN 16414:2014 Air ambiant - Biosurveillance à l'aide de mousses - Accumulation des contaminants atmosphériques dans les mousses prélevées in situ : de la récolte à la préparation des échantillons
  • NF EN ISO 16017-2:2003 Air intérieur, air ambiant et air des lieux de travail - Échantillonnage et analyse des composés organiques volatils par tube à adsorption/désorption thermique/chromatographie en phase gazeuse sur capillaire - Partie 2 : échantillonnage par diffu...
  • NF X43-014:2003 Air quality - Ambient air - Determination of total atmospheric deposition - Sampling - Preparation of samples prior analysis.
  • NF EN ISO 16017-1:2001 Air intérieur, air ambiant et air des lieux de travail - Échantillonnage et analyse des composés organiques volatils par tube à adsorption/désorption thermique/chromatographie en phase gazeuse sur capillaire - Partie 1 : échantillonnage par pompage
  • XP X 43-053-1997 AIR QUALITY. AMBIENT AIR. INSTRUCTION HANDBOOK FOR THE CALIBRATION OF ATMOSPHERIC POLLUANT ANALYZERS AND SAMPLERS. SAMPLING. MEASURING STATION AND GAS FLOW RATES.
  • FD X43-404:2022 Air quality - Air of domestic living accomodations and of public premises - Airbone sampling and analysis of the allergens in the indoor environment
  • XP ISO/TS 20593:2017 Air ambiant - Détermination de la concentration en masse de particules provenant de l'usure des pneumatiques et des chaussées (TRWP) - Méthode par pyrolyse-CG/SM
  • NF ISO 15202-1:2020 Air des lieux de travail - Détermination des métaux et métalloïdes dans les particules en suspension dans l'air par spectrométrie d'émission atomique avec plasma à couplage inductif - Partie 1 : prélèvement d'échantillons
  • NF ISO 20045:2023 Mesurage de la radioactivité dans l'environnement - Air : tritium - Méthode d'essai à l'aide d'un prélèvement par barbotage
  • NF X43-259:1990 Qualité de l'air - Air des lieux de travail - Prélèvement individuel ou à poste fixe de la fraction alvéolaire de la pollution particulaire. Méthode de séparation par cyclone 10 mm.
  • XP CEN/TS 17458:2021 Air ambiant - Méthode d'évaluation de la performance d'applications d'un système de modélisation de la contribution des sources de particules en suspension de type "récepteur-orienté"
  • NF X43-903*NF EN 16413:2014 Ambient air - Biomonitoring with lichens - Assessing epiphytic lichen diversity
  • NF EN ISO 11665-11:2019 Mesurage de la radioactivité dans l'environnement - Air : radon 222 - Partie 11 : méthode d'essai pour le gaz du sol avec un prélèvement en profondeur
  • XP CEN/TS 16115-1:2011 Qualité de l'air ambiant - Mesurage de bioaérosols - Partie 1 : dosage des moisissures à l'aide de systèmes de prélèvement sur filtres et d'analyses de cultures
  • NF EN 13205-1:2014 Exposition sur les lieux de travail - Évaluation des performances des dispositifs de prélèvement pour le mesurage des concentrations de particules en suspension dans l'air - Partie 1 : exigences générales
  • XP CEN/TS 16817-2:2015 Air ambiant - Surveillance des effets d'organismes génétiquement modifiés (OGM) - Surveillance du pollen - Partie 2 : échantillonnage biologique du pollen à l'aide de colonies d'abeilles
  • FD X43-070-6:2019 Air quality - Practical guidance for estimating the uncertainty of measurement on polluant concentration in ambient air - Part 6 : estimation of the uncertainties on mass concentrations of particulate matters measured automatically
  • XP X43-080-1*XP CEN/TS 16817-1:2015 Ambient air - Monitoring the effects of genetically modified organisms (GMO) - Pollen monitoring - Part 1 : technical pollen sampling using pollen mass filter (PMF) and Sigma-2-sampler
  • NF X44-101-14*NF EN ISO 14644-14:2016 Cleanrooms and associated controlled environments - Part 14 : assessment of suitability for use of equipment by airborne particle concentration
  • NF EN ISO 14644-2:2016 Salles propres et environnements maîtrisés apparentés - Partie 2 : surveillance du maintien des performances de la salle propre pour la propreté particulaire de l'air
  • NF X43-007:2008 Air quality - Ambient air - Determination of the mass of dry atmospheric depositions - Sampling on deposit plates - Preparation and treatment.

Professional Standard - Agriculture, Sampling of ambient air particulate matter

  • 空气和废气监测分析方法 7.2.3-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter Chapter 2 Sample Collection of Atmospheric Particulate Matter Emission Sources Three-source Sample Collection Methods
  • 空气和废气监测分析方法 7.3.4-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulates Chapter 3 Environmental Receptor Sample Collection 4 Sampling Time Sampling Period and Sampling Requirements
  • 空气和废气监测分析方法 7.2.1-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter Chapter 2 Sample Collection of Atmospheric Particulate Matter Emission Sources—Classification of Particulate Matter Pollutio
  • 空气和废气监测分析方法 7.3.2-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulates Chapter 3 Environmental Receptor Sample Collection 2 Sampling Instrument Selection
  • 空气和废气监测分析方法 7.2.4-2003 Part Seven Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter Chapter Two Atmospheric Particulate Matter Emission Source Sample Collection Four-source Sample Processing Methods
  • 空气和废气监测分析方法 7.2.2-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter Chapter 2 Sample Collection of Atmospheric Particulate Matter Emission Sources 2 Other Classification Methods
  • 空气和废气监测分析方法 7.3.5-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulates Chapter 3 Environmental Receptor Sample Collection 5 Sample Storage and Transportation
  • GB/T 15432-1995(XG1-2018) Gravimetric Method for Determination of Total Suspended Particulate Matter in Ambient Air "Revision No. 1"
  • 空气和废气监测分析方法 7.3.3-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulates Chapter 3 Environmental Receptor Sample Collection Three Filter Membrane Selection
  • 空气和废气监测分析方法 7.3.1-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulates Chapter 3 Environmental Receptor Sample Collection Point and Layout Principle
  • HJ 759-2023 Determination of 65 Volatile Organic Compounds in Ambient Air Tank Sampling/Gas Chromatography-Mass Spectrometry
  • 空气和废气监测分析方法 7.5.1-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter
  • 空气和废气监测分析方法 7.5.2-2003 Part Seven Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter
  • 空气和废气监测分析方法 7.5.4-2003 Part Seven Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particles Chapter Five Particle Composition Spectrum Establishment Four Source and Receptor Composition Spectrum Data Evaluation
  • 空气和废气监测分析方法 7.5.3-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter Chapter 5 Establishment of Particulate Matter Composition Spectrum Three Sources and Receptor Chemical Composition Scope
  • 空气和废气监测分析方法 7.4.2-2003 Part Seven Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particles Chapter Four Analytical Methods of Source and Receptor Samples Two Analytical Techniques of Source and Receptor Samples
  • 空气和废气监测分析方法 7.4.1-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulates Chapter 4 Analytical Methods of Source and Receptor Samples—Weighing of Filter

Korean Agency for Technology and Standards (KATS), Sampling of ambient air particulate matter

  • KS B 3278-1992
  • KS I ISO 9855:2005 Ambient air-Determination of the particulate lead content of aerosols collected on filters(Atomic absorption spectrometric method)
  • KS I ISO 10473:2020 Ambient air — Measurement of the mass of particulate matter on a filter medium — Beta-ray absorption method
  • KS I ISO 12884:2008 Ambient air-Determination of total (gas and particle-phase) polycyclic aromatic hydrocarbons-Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analyses
  • KS I ISO 10473:2010 Ambient air-Measurement of the mass of particulate matter on a filter medium-Beta-ray absorption method
  • KS H ISO 15593:2009 Environmental tobacco smoke-Estimation of its contribution to respirable suspended particles-Determination of particulate matter by ultraviolet absorbance and by fluorescence
  • KS H ISO 18144:2009 Environmental tobacco smoke-Estimation of its contribution to respirable suspended particles-Method based on solanesol
  • KS I 2005-2005(2010) Air quality-Determination of gaseous sulphur compounds in ambient air(Sampling equipment)
  • KS I ISO 12884-2008(2018) Ambient air-Determination of total (gas and particle-phase) polycyclic aromatic hydrocarbons — Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analyses
  • KS I ISO 4219:2022 Air quality — Determination of gaseous sulphur compounds in ambient air — Sampling equipment
  • KS I ISO 9855-2005(2020) Ambient air-Determination of the particulate lead content of aerosols collected on filters(Atomic absorption spectrometric method)
  • KS I ISO 15202-1:2006 Workplace air-Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry-Part 1:Sampling
  • KS I ISO 15202-1:2014 Workplace air — Determination of metals and metalloids in Workplace air — Determination of metals and metalloids in emission spectrometry — Part 1: Sampling
  • KS I 2209-2008 Form, size and performance testing methods of filtration media for collecting airborne particulate matters
  • KS I ISO 14644-1-2017(2022) Cleanrooms and associated controlled environments — Part 1:Classification of air cleanliness by particle concentration
  • KS I 30011-2012 Workplace air-Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
  • KS I ISO 14644-12:2020 Cleanrooms and associated controlled environments —Part 12: Specifications for monitoring air cleanliness by nanoscale particle concentration

Shandong Provincial Standard of the People's Republic of China, Sampling of ambient air particulate matter

  • DB37/T 4378-2021 Portable beta-ray method for the determination of particulate matter in ambient air
  • DB37/T 4434-2021 Determination of 57 kinds of ozone precursors in ambient air by tank sampling gas chromatography-hydrogen flame ionization detector mass spectrometry

国家市场监督管理总局、中国国家标准化管理委员会, Sampling of ambient air particulate matter

  • GB/T 39193-2020 Ambient air—Determination of particulate matter mass concentration—Gravimetric method

VN-TCVN, Sampling of ambient air particulate matter

  • TCVN 6152-1996 Ambient air.Determination of the particulate lead content of aerosols collected on filters.Atomic absorption spectrometric method
  • TCVN 5968-1995 Air quality.Determination of gaseous sulphur compounds in ambient air.Sampling equipment
  • TCVN 6157-1996 Ambient air.Determination of the mass concentration of ozone.Chemiluminescence method

NL-NEN, Sampling of ambient air particulate matter

  • NEN 2785-1990 Air quality - Ambient air - Collection of particulate matter for the determination of the content of metals - HVS-method

ES-UNE, Sampling of ambient air particulate matter

  • UNE-CEN/TS 16976:2016 Ambient air - Determination of the particle number concentration of atmospheric aerosol (Endorsed by Asociación Española de Normalización in January of 2021.)
  • UNE-CEN/TS 17458:2020 Ambient air - Methodology to assess the performance of receptor oriented source apportionment modelling applications for particulate matter (Endorsed by Asociación Española de Normalización in February of 2021.)
  • UNE-EN 16868:2020 Ambient air - Sampling and analysis of airborne pollen grains and fungal spores for networks related to allergy - Volumetric Hirst method
  • UNE-EN 14902:2006/AC:2006 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
  • UNE-EN ISO 23861:2023 Workplace air - Chemical agent present as a mixture of airborne particles and vapour - Requirements for evaluation of measuring procedures using samplers (ISO 23861:2022)
  • UNE-EN 17346:2021 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers
  • UNE-EN ISO 11665-11:2019 Measurement of radioactivity in the environment - Air: radon-222 - Part 11: Test method for soil gas with sampling at depth (ISO 11665-11:2016) (Endorsed by Asociación Española de Normalización in November of 2019.)

Beijing Provincial Standard of the People's Republic of China, Sampling of ambient air particulate matter

  • DB11/T 1819-2021 Technical specifications for grid monitoring and evaluation of ambient air particulate matter
  • DB11/T 2056-2022 Technical specifications for grid-based monitoring of total suspended particulate matter in ambient air

AT-ON, Sampling of ambient air particulate matter

  • ONORM M 5858-1997 Air analysis - Ambient air monitoring - Requirements for monitors for suspended particulate matter - Marking of conformity

AENOR, Sampling of ambient air particulate matter

  • UNE 77202:1991 AIR QUALITY. DETERMINATION OF GASEOUS SULPHUR COMPOUNDS IN AMBIENT AIR. SAMPLING EQUIPMENT.
  • UNE-EN ISO 10882-1:2012 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2011)
  • UNE-EN 16450:2017 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
  • UNE-ISO 10473:2005 Ambient air -- Measurement of the mass of particulate matter on a filter medium -- Beta-ray absorption method
  • UNE-EN 14902:2006 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
  • UNE-EN 12341:2015 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • UNE-EN 16414:2014 Ambient air - Biomonitoring with mosses - Accumulation of atmospheric contaminants in mosses collected in situ: from the collection to the preparation of samples
  • UNE-CEN/TR 13205-3:2015 IN Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data
  • UNE-EN ISO 10882-2:2001 Health and safety in welding and allied processes. Sampling of airbone particles and gases in the operator's breathing zone. Part 2: Samplling of gases. (ISO 10882-2:2000).
  • UNE 77230:1998 AMBIENT AIR. DETERMIANTION OF THE PARTICULATE LEAD CONTENT OF AEROSOLS COLLECTED ON FILTERS. ATOMIC ABSORPTION SPECTROMETRIC METHOD.
  • UNE-EN 13205-5:2015 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 5: Aerosol sampler performance test and sampler comparison carried out at workplaces
  • UNE-EN 13205-2:2015 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2: Laboratory performance test based on determination of sampling efficiency
  • UNE 77250:2001 Ambient air. Determination of total (gas and particle-phase) polycyclic aromatic hydrocarbons. Collection on sorbent-backed filters with gas chromatographic/mass spectometric analyses.
  • UNE-EN 13205-1:2015 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1: General requirements

AWS - American Welding Society, Sampling of ambient air particulate matter

  • F1.1-1985 METHOD FOR SAMPLING AIRBORNE PARTICULATES GENERATED BY WELDING AND ALLIED PROCESSES

Lithuanian Standards Office , Sampling of ambient air particulate matter

  • LST EN ISO 10882-1:2012 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2011)
  • LST ISO 10473:2001 Ambient air. Measurement of the mass of particulate matter on a filter medium. Beta-ray absorption method
  • LST EN 14907-2005 Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
  • LST CEN/TS 17458-2021 Ambient air - Methodology to assess the performance of receptor oriented source apportionment modelling applications for particulate matter
  • LST EN 14902-2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
  • LST EN 14902-2005/AC-2007 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
  • LST EN 12341-2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • LST EN ISO 10882-2:2002 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases (ISO 10882-2:2000)
  • LST ISO 11338-1:2008 Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Part 1: Sampling (ISO 11338-1:2003, identical)
  • LST ISO 9855:2003 Ambient air. Determination of the particulate lead content of aerosols collected on filters. Atomic absorption spectrometric method (idt ISO 9855:1993)
  • LST ISO 12884:2001 Ambient air. Determination of total (gas- and particle-phase) polycyclic aromatic hydrocarbons. Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analyses

Group Standards of the People's Republic of China, Sampling of ambient air particulate matter

  • T/AHEMA 22-2022 Technical Code for Cruise Monitoring of Particulate Matter by Light Scattering Method

European Committee for Standardization (CEN), Sampling of ambient air particulate matter

  • PD CEN/TS 16450:2013 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
  • CEN/TS 15439:2006 Biomass gasification - Tar and particles in product gases - Sampling and analysis
  • EN ISO 13138:2012 Air quality - Sampling conventions for airborne particle deposition in the human respiratory system (ISO 13138:2012)
  • CEN/TS 17458:2020 Ambient air - Methodology to assess the performance of receptor oriented source apportionment modelling applications for particulate matter
  • PD CEN/TS 17458:2020 Ambient air - Methodology to assess the performance of receptor oriented source apportionment modelling applications for particulate matter
  • FprEN 12341 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • EN ISO 14644-1:2015 Cleanrooms and associated controlled environments - Part 1: Classification of air cleanliness by particle concentration (ISO 14644-1:2015)
  • EN 12341:2023 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • EN 14907:2005 Ambient air quality Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
  • CEN/TR 13205-3:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data
  • PD CEN/TR 13205-3:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data
  • CEN/TS 16817-2:2015 Ambient air - Monitoring the effects of genetically modified organisms (GMO) - Pollen monitoring - Part 2: Biological pollen sampling using bee colonies
  • EN ISO 11665-11:2019 Measurement of radioactivity in the environment - Air: radon-222 - Part 11: Test method for soil gas with sampling at depth (ISO 11665-11:2016)
  • EN 16414:2014 Ambient air - Biomonitoring with mosses - Accumulation of atmospheric contaminants in mosses collected in situ: from the collection to the preparation of samples
  • EN 14902:2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter

Danish Standards Foundation, Sampling of ambient air particulate matter

  • DS/CEN/TS 16450:2013 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
  • DS/CEN/TS 17458:2021 Ambient air – Methodology to assess the performance of receptor oriented source apportionment modelling applications for particulate matter
  • DS/EN 14902/AC:2007 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
  • DS/EN 14902:2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
  • DS/EN 14907:2005 Ambient air quality - Reference gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter

API - American Petroleum Institute, Sampling of ambient air particulate matter

  • API 26-60057-1969 AIR QUALITY MONOGRAPHS Monograph #69-1 Ambient Air quality Standards for Particulates-Review and Evaluation

CEN - European Committee for Standardization, Sampling of ambient air particulate matter

  • EN 16450:2017 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2@5)
  • PREN 13205-2010 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations
  • PREN 16868-2017 Ambient air - Sampling and analysis of airbone pollen grains and fungal spores for networks related to allergy - Volumetric Hirst method
  • EN 16868:2019 Ambient air - Sampling and analysis of airbone pollen grains and fungal spores for networks related to allergy - Volumetric Hirst method
  • PD CEN/TS 16817-2:2015 Ambient air - Monitoring the effects of genetically modified organisms (GMO) - Pollen monitoring Part 2: Biological pollen sampling using bee colonies

IN-BIS, Sampling of ambient air particulate matter

American Society for Testing and Materials (ASTM), Sampling of ambient air particulate matter

  • ASTM D8358-21 Standard Guide for Assessment and Inclusion of Wall Deposits in the Analysis of Single-Stage Samplers for Airborne Particulate Matter
  • ASTM D6602-03b Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
  • ASTM D6602-03 Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
  • ASTM D6602-02 Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
  • ASTM D6209-98(2012) Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Anal
  • ASTM D6209-13 Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Anal
  • ASTM D4096-91(1997)e1 Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High-Volume Sampler Method)
  • ASTM F318-78(1996) Standard Practice for Sampling Airborne Particulate Contamination in Clean Rooms for Handling Aerospace Fluids
  • ASTM D6602-13(2022)e1 Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
  • ASTM D6602-13(2022) Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
  • ASTM D6831-02 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
  • ASTM D6831-11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
  • ASTM D6831-11(2018) Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
  • ASTM D6602-03b(2010)e1 Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
  • ASTM D6602-13 Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
  • ASTM D6209-98e1 Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Analysis)
  • ASTM D6209-98(2004) Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Analysis)
  • ASTM D3267-91(2000)e1 Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method)

NZ-SNZ, Sampling of ambient air particulate matter

  • AS/NZS 3580.17:2016 Methods for sampling and analysis of ambient air Method 17: Determination of gaseous compounds in ambient air-Direct-reading cavity ring-down spectroscopy instrumental method

PL-PKN, Sampling of ambient air particulate matter

  • PN Z04008-07-1989 Air puri?y pro?ection Sampling methods Prindplcs of air sampling in work environment and interpretation of results
  • PN Z04092-08-1989 Air purity protection Tests for nitric acid and nitrogen oxides Determination of nitrogen dioxide in ambient air (imision) by spectrophotometric method with passive sampling

IT-UNI, Sampling of ambient air particulate matter

  • UNI CEN/TS 17458-2021 Ambient air - Methodology to assess the performance of receptor oriented source apportionment modelling applications for particulate matter

未注明发布机构, Sampling of ambient air particulate matter

  • BS EN 12341:2023 Ambient air — Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter

CU-NC, Sampling of ambient air particulate matter

  • NC 93-02-105-1985 Standards System for Environmental Protection. Atmosphere. Instruments for Air Sampling in Human Settlements. General Technical Requirements

Institute of Environmental Sciences and Technology, Sampling of ambient air particulate matter

  • IEST G-CC1004-1999 Sequential-Sampling Plan for Use in Classification of the Particulate Cleanliness of Air in Cleanrooms and Clean Zones

Liaoning Provincial Standard of the People's Republic of China, Sampling of ambient air particulate matter

  • DB21/T 3071-2018 Determination of Volatile Organic Compounds in Ambient Air Passive Sampling/Thermal Desorption/Gas Chromatography-Mass Spectrometry

Society of Automotive Engineers (SAE), Sampling of ambient air particulate matter

  • SAE ARP6320A-2021 Procedure for the Continuous Sampling and Measurement of Non-Volatile Particulate Matter Emissions from Aircraft Turbine Engines

NO-SN, Sampling of ambient air particulate matter

  • NS 4850-1980 Air quality - Determination of gaseous sulphur compounds in ambient air - Sampling equipment

Heilongjiang Provincial Standard of the People's Republic of China, Sampling of ambient air particulate matter

  • DB23/T 2076-2018 Determination of Pb, Cd and As elements in ambient air fine particulate matter (PM2.5) by wavelength dispersive-X-ray fluorescence spectrometry

US-CFR-file, Sampling of ambient air particulate matter

  • CFR 40-61.33-2014 Protection of Environment. Part61:National emission standards for hazardous air pollutants. Section61.33:Stack sampling.
  • CFR 40-61.53-2014 Protection of Environment. Part61:National emission standards for hazardous air pollutants. Section61.53:Stack sampling.

RU-GOST R, Sampling of ambient air particulate matter

  • GOST R ISO 14644-1-2017 Cleanrooms and associated controlled environments. Part 1. Classification of air cleanliness by particle concentration
  • GOST R ISO 14644-1-2000 Cleanrooms and associated controlled environments. Part 1. Classification of air cleanliness
  • GOST R ISO 15202-1-2014 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Part 1. Sampling
  • GOST R ISO 15202-2-2014 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Part 2. Sample preparation

IX-EU/EC, Sampling of ambient air particulate matter

  • 1999/30/EC-1999 Council Directive Relating to Limit Values for Sulphur Dioxide, Nitrogen Dioxide and Oxides of Nitrogen, Particulate Matter and Lead in Ambient Air

PT-IPQ, Sampling of ambient air particulate matter

国家文物局, Sampling of ambient air particulate matter

  • WW/T 0047-2012 Gas Diffusion Sampling and Determination Method for Environmental Detection of Cultural Relics Preservation in Collections Determination of Ammonia

PH-BPS, Sampling of ambient air particulate matter

  • PNS ISO 14644-14:2021 Cleanrooms and associated controlled environments - Part 14: Assessment of suitability for use of equipment by airborne particle concentration
  • PNS ISO 14644-12:2021 Cleanrooms and associated controlled environments - Part 12: Specifications for monitoring air cleanliness by nanoscale particle concentration

Japanese Industrial Standards Committee (JISC), Sampling of ambient air particulate matter

  • JIS K 0901:1991 Form, size and performance testing methods of filtration media for collecting airborne particulate matters




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved