ZH
RU
ES

Test method for single-subject conductive adhesive

Test method for single-subject conductive adhesive, Total:500 items.

In the international standard classification, Test method for single-subject conductive adhesive involves: Medical equipment, Adhesives, Dentistry, Rubber, Insulating materials, Raw materials for rubber and plastics, Rectifiers. Convertors. Stabilized power supply, Motor cycles and mopeds, Electrical wires and cables, Optoelectronics. Laser equipment, Surface treatment and coating, Water quality, Construction materials, Electronic tubes, Insulating fluids, Conducting materials, Analytical chemistry, Semiconducting materials, Printed circuits and boards, Electricity. Magnetism. Electrical and magnetic measurements, Space systems and operations, Earthworks. Excavations. Foundation construction. Underground works, Test conditions and procedures in general, Aerospace electric equipment and systems, Protection of and in buildings, Semiconductor devices, Testing of metals, Organic chemicals, Integrated circuits. Microelectronics, Fuels, Rubber and plastics products, Road vehicle systems, Plastics, Aerosol containers, Thermodynamics and temperature measurements, Products of the textile industry, Geology. Meteorology. Hydrology, Magnetic materials, Textile fibres, Continuous handling equipment, Ceramics, Measurement of fluid flow, Solar energy engineering, Components and accessories for telecommunications equipment, Fuel cells, Environmental testing, Electromechanical components for electronic and telecommunications equipment, Electromagnetic compatibility (EMC), Coatings and related processes used in aerospace industry, Fibre optic communications, Protection against fire, Corrosion of metals, Mechanical testing, Shipbuilding and marine structures in general, Radiocommunications, Materials for aerospace construction, Soil quality. Pedology, Rotating machinery.

Standard Association of Australia （SAA）, Test method for single-subject conductive adhesive

AS 2836.0:1998 Methods of testing surgical dressings and surgical dressing materials - General introduction and list of methods
AS 2836.3:1998 Methods of testing surgical dressing and surgical dressing materials - Method for the determination of mass per unit area
AS 2836.2:1998 Methods of testing surgical dressing and surgical dressing materials - Method for the identification of cotton and viscose fibres
AS/NZS 1660.3:1998 Test methods for electric cables, cords and conductors - Electrical tests
AS 1683.23:2000 Methods of test for elastomers - Rubber - Vulcanized - Determination of resistance to liquids
AS/NZS 2350.0:1999 Methods of testing portland and blended cements - General introduction and list of methods
AS/NZS 2098.10:1995 Methods of test for veneer and plywood Method 10:Measurement of dimensions and shape for structural laminated veneer lumber
AS/NZS 1660.2.2:1998 Test methods for electric cables, cords and conductors - Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to elastomeric, XLPE and XLPVC materials
AS 2313.4.3:2006 Methods of test for single sided and double sided pressure-sensitive adhesive tape - Printing properties - Determining abrasive resistance
AS 1937.1:1991 Methods of test for sealers and adhesives for automotive purposes - Determination of flow properties in absolute units
AS/NZS 1660.2.5:1998 Test methods for electric cables, cords and conductors - Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to cables above 1 kV
AS/NZS 1301.456:2022 Methods of test for pulp and paper, Method 456: Determination of conductivity of aqueous extracts of paper, board and pulps
AS 2313.2.6:2006 Methods of test for single sided and double sided pressure-sensitive adhesive tape - Physical properties - Determining the thickness of release liner
AS 2313.2.7:2006 Methods of test for single sided and double sided pressure-sensitive adhesive tape - Physical properties - Determining grammage of release liner
AS 1334.8:1982 Methods of testing conveyor and elevator belting - Determination of resistance to tear propagation and resistance of carcass to tearing
AS 2313.4.1:2006 Methods of test for single sided and double sided pressure-sensitive adhesive tape - Printing properties - Determining indelibility of printed labels
AS 2313.4.2:2006 Methods of test for single sided and double sided pressure-sensitive adhesive tape - Printing properties - Determining lightfastness of printed labels
AS 2313.3.5:2006 Methods of test for single sided and double sided pressure-sensitive adhesive tape - Ageing properties - Determining dimensional stability of label stock
IEC 61000-4-24:2015+AMD1:2023 CSV Electromagnetic compatibility (EMC) — Part 4-24: Testing and measurement techniques — Test methods for protective devices for HEMP conducted disturbance
AS/NZS 1660.2.3:1998 Test methods for electric cables, cords and conductors - Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to PVC and halogen free thermoplastic materials

Professional Standard - Aerospace, Test method for single-subject conductive adhesive

QJ 1523-1988 Conductive Adhesive Resistivity Test Method

American Society for Testing and Materials (ASTM), Test method for single-subject conductive adhesive

ASTM D2739-97 Standard Test Method for Volume Resistivity of Conductive Adhesives
ASTM D991-89(2005) Standard Test Method for Rubber Property-Volume Resistivity Of Electrically Conductive and Antistatic Products
ASTM D4325-20 Standard Test Methods for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
ASTM D2739-97(2010) Standard Test Method for Volume Resistivity of Conductive Adhesives
ASTM D1871-98 Standard Test Methods for Adhesion of Single-Filament Steel Wire to Rubber
ASTM G105-16 Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests
ASTM D4399-05 Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
ASTM D4399-05(2023) Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
ASTM D4325-97 Standard Test Methods for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
ASTM D4325-02 Standard Test Methods for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
ASTM D4325-08 Standard Test Methods for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
ASTM D4325-13 Standard Test Methods for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
ASTM D1125-95(1999) Standard Test Methods for Electrical Conductivity and Resistivity of Water
ASTM B342-63(1980)e1 Test Method for Electrical Conductivity by Use of Eddy Currents
ASTM D4399-90(1999) Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
ASTM B193-02 Standard Test Method for Resistivity of Electrical Conductor Materials
ASTM B193-00 Standard Test Method for Resistivity of Electrical Conductor Materials
ASTM B193-01 Standard Test Method for Resistivity of Electrical Conductor Materials
ASTM B193-87(1992) Standard Test Method for Resistivity of Electrical Conductor Materials
ASTM B193-19 Standard Test Method for Resistivity of Electrical Conductor Materials
ASTM B193-87 Standard Test Method for Resistivity of Electrical Conductor Materials
ASTM B193-20 Standard Test Method for Resistivity of Electrical Conductor Materials
ASTM D4496-21 Standard Test Method for D-C Resistance or Conductance of Moderately Conductive Materials
ASTM D5902-05(2010) Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value
ASTM D2228-04(2019) Standard Test Method for Rubber Property—Relative Abrasion Resistance by Pico Abrader Method
ASTM F76-86(1996)e1 Standard Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility in Single-Crystal Semiconductors
ASTM F76-86(2002) Standard Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility in Single-Crystal Semiconductors
ASTM F76-08 Standard Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility in Single-Crystal Semiconductors
ASTM F1896-10 Test Method for Determining the Electrical Resistivity of a Printed Conductive Material
ASTM E1004-09 Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy-Current) Method
ASTM D4399-05e1 Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
ASTM D4399-05(2011) Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
ASTM D4399-05(2017) Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
ASTM D2148-02 Standard Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation
ASTM D2148-18 Standard Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation
ASTM D2148-19e1 Standard Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation
ASTM D2148-19 Standard Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation
ASTM D991-89(2000)e1 Standard Test Method for Rubber Property-Volume Resistivity Of Electrically Conductive and Antistatic Products
ASTM D991-89(2020) Standard Test Method for Rubber Property—Volume Resistivity Of Electrically Conductive and Antistatic Products
ASTM D991-89(2014) Standard Test Method for Rubber Property—Volume Resistivity Of Electrically Conductive and Antistatic Products
ASTM D2167-94(2001) Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method
ASTM E1004-17 Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method
ASTM C483-95(2000) Standard Test Method for Electrical Resistance of Conductive Ceramic Tile (Withdrawn 2004)
ASTM D5128-90(1999)e1 Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
ASTM D2167-08 Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method
ASTM F1896-98(2004) Test Method for Determining the Electrical Resistivity of a Printed Conductive Material
ASTM F1896-16 Test Method for Determining the Electrical Resistivity of a Printed Conductive Material
ASTM E1161-95 Standard Test Method for Radiologic Examination of Semiconductors and Electronic Components
ASTM F1896-98 Test Method for Determining the Electrical Resistivity of a Printed Conductive Material
ASTM D5128-90(2005) Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
ASTM D5128-09 Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
ASTM F76-08(2016)e1 Standard Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility in Single-Crystal Semiconductors
ASTM D257-14(2021)e1 Standard Test Methods for DC Resistance or Conductance of Insulating Materials
ASTM D4747-87(1996)e1 Standard Test Method for Determining Unreacted Monomer Content of Latexes Using Gas-Liquid Chromatography
ASTM D4747-02 Standard Test Method for Determining Unreacted Monomer Content of Latexes Using Gas-Liquid Chromatography
ASTM D4747-02(2014) Standard Test Method for Determining Unreacted Monomer Content of Latexes Using Gas-Liquid Chromatography
ASTM D4747-02(2008) Standard Test Method for Determining Unreacted Monomer Content of Latexes Using Gas-Liquid Chromatography
ASTM D5464-93(2001) Standard Test Methods for pH Measurement of Water of Low Conductivity
ASTM D5128-14(2022) Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
ASTM D5464-16 Standard Test Method for pH Measurement of Water of Low Conductivity
ASTM F76-08(2016) Standard Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility in Single-Crystal Semiconductors
ASTM D2624-09 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM D2624-00 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM D4519-10 Standard Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by Cation Exchange and Degassed Cation Conductivity
ASTM D2167-94 Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method
ASTM F616M-96 Standard Test Method for Measuring MOSFET Drain Leakage Current (Metric)
ASTM F616M-96(2003) Standard Test Method for Measuring MOSFET Drain Leakage Current (Metric)
ASTM D7952-15(2021) Standard Test Method for Measuring Aspiration Potential of Aerosol Products
ASTM D4827-93(1998) Standard Test Method for Determining the Unreacted Monomer Content of Latexes Using Capillary Column Gas Chromatography
ASTM D4827-03(2015) Standard Test Method for Determining the Unreacted Monomer Content of Latexes Using Capillary Column Gas Chromatography
ASTM B63-07(2018) Standard Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials
ASTM D4308-95(2005) Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
ASTM D4308-95(2000)e1 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
ASTM D4308-95(2010) Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
ASTM D4308-10 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
ASTM D5128-14 Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
ASTM C1702-23 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM C1702-09 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM C1702-15 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM C1702-15b Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM F326-96(2001)e1 Standard Test Method for Electronic Measurement for Hydrogen Embrittlement from Cadmium-Electroplating Processes
ASTM F326-96(2001)e2 Standard Test Method for Electronic Measurement for Hydrogen Embrittlement from Cadmium-Electroplating Processes
ASTM C910-93a(1997) Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants
ASTM C910-03 Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants
ASTM C910-06 Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants
ASTM C910-16(2021) Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants
ASTM C910-16 Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants
ASTM D5391-99 Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample
ASTM D5391-99(2005) Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample
ASTM D6391-11(2020) Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration
ASTM C1702-09a Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM C1702-17 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM C1702-13 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM C1702-14 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM A772/A772M-00 Standard Test Method for ac Magnetic Permeability of Materials Using Sinusoidal Current
ASTM A772/A772M-00(2022) Standard Test Method for AC Magnetic Permeability of Materials Using Sinusoidal Current
ASTM A772/A772M-00(2016) Standard Test Method for AC Magnetic Permeability of Materials Using Sinusoidal Current
ASTM D4827-03(2022) Standard Test Method for Determining the Unreacted Monomer Content of Latexes Using Capillary Column Gas Chromatography
ASTM D4308-12 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
ASTM D4308-13 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
ASTM C1702-13a Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM D7677-11 Standard Test Method for the Continuous Measurement of Dissolved Ozone in Low Conductivity Water
ASTM D7677-16 Standard Test Method for the Continuous Measurement of Dissolved Ozone in Low Conductivity Water
ASTM D4827-03 Standard Test Method for Determining the Unreacted Monomer Content of Latexes Using Capillary Column Gas Chromatography
ASTM D6343-14(2018) Standard Test Methods for Thin Thermally Conductive Solid Materials for Electrical Insulation and Dielectric Applications
ASTM D1000-04e1 Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
ASTM B986-13(2019) Standard Test Method for Determination of Tensile Strength by Mass Method for Stranded Conductors Intended for use in Electronic Application
ASTM D7704-12 Standard Test Method for Total Aldehydes in Styrene Monomer by Potentiometric Titration
ASTM D7704-16 Standard Test Method for Total Aldehydes in Styrene Monomer by Potentiometric Titration
ASTM B764-04 Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)
ASTM D3165-00 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies
ASTM D3165-07(2023) Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies
ASTM C177-10 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
ASTM B764-04(2009) Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)
ASTM F673-90(1996)e1 Standard Test Methods for Measuring Resistivity of Semiconductor Slices or Sheet Resistance of Semiconductor Films with a Noncontact Eddy-Current Gage
ASTM E2679-22 Standard Test Method for Acidity in Mono-, Di-, Tri- and Tetraethylene Glycol by Non-Aqueous Potentiometric Titration
ASTM B764-04(2021) Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)
ASTM B764-04(2014) Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit 40;STEP Test41;
ASTM D5084-16a Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
ASTM D5084-16 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
ASTM D5856-15 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
ASTM B798-95(2009) Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography
ASTM B764-94 Standard Test Method for Simultaneous Thickness and Electrochemical Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)
ASTM B764-94(2003) Standard Test Method for Simultaneous Thickness and Electrochemical Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)
ASTM F77-69(1996) Test Method for Apparent Density of Ceramics for Electron Device and Semiconductor Application (Withdrawn 2001)
ASTM D3165-07 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies
ASTM D3165-07(2014) Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies
ASTM D5334-14 Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure
ASTM D5856-95(2007) Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
ASTM D5856-95(2002) Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
ASTM D5856-95(2002)e1 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
ASTM D5856-95 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter

Association Francaise de Normalisation, Test method for single-subject conductive adhesive

NF S91-277*NF EN ISO 13078:2013 Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple
NF EN 13868:2003 Cathéters - Méthodes d'essai de résistance à la plicature pour cathéters à simple voie et tubes à usage médical
NF C96-022-44*NF EN 60749-44:2016 Semiconductor devices - Mechanical and climatic test methods - Part 44 : neutron beam irradiated single event effect (SEE) test method for semiconductor devices
NF ISO 16525-1:2014 Adhésifs - Méthodes d'essai pour adhésifs à conductivité électrique isotrope - Partie 1 : méthodes d'essai générales
NF EN ISO 13078:2013 Médecine bucco-dentaire - Four dentaire - Méthode d'essai pour le mesurage de la température au moyen d'un thermocouple
NF C28-913/IN1:2007 Magnetic materials - Methods of measurement of the magnetic properties of electrical sheet and strip by means of a single sheet tester.
NF EN 61189-5-503:2017 Méthodes d'essai pour les matériaux électriques, les cartes imprimées et autres structures d'interconnexion et ensembles - Partie 5-503 : méthodes d'essai générales pour les matériaux et les assemblages - Essais des filaments anodiques condu...
NF C28-913:2007 Magnetic materials - Methods of measurement of the magnetic properties of electrical sheet and strip by means of a single sheet tester.
NF C93-735-503*NF EN 61189-5-503:2017 Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 5-503 : general test method for materials and assemblies - Conductive anodic filaments (CAF) testing of circuit boards
NF EN 61338-1-5:2015 Résonateurs diélectriques à modes guidés - Partie 1-5 : informations générales et conditions d'essais - Méthode de mesure de la conductivité au niveau de l'interface entre une couche conductrice et un substrat diélectrique fonctionnant aux h...
NF C96-373*NF EN IEC 63373:2022 Dynamic on-resistance test method guidelines for GaN HEMT based power conversion devices
UTE C32-071U*UTE C32-071:1985 Test electric cables under fire conditions. Guide stating the test method for checking small single insulated cores of the category C2.
NF EN IEC 63373:2022 Lignes directrices pour les méthodes d'essai de résistance dynamique à l'état passant des dispositifs de conversion de puissance fondés sur les HEMT en GaN
NF C32-075-1:1999 Common test methods for cables under fire conditions - Test for resistance to vertical flame propagation for a single insulated conductor or cable - Part 1 : apparatus.
NF ISO 1813:2014 Transmissions par courroies - Courroies striées, courroies trapézoïdales simples et jumelées y compris celles à section large et hexagonales - Conductibilité électrique des courroies anti-électrostatiques : spécifications et méthodes d'essai
NF C56-282-7-2*NF EN IEC 62282-7-2:2021 Fuel cell technologies - Part 7-2 : test methods - Single cell and stack performance tests for solid oxide fuel cells (SOFCs)
NF ISO 16525-2:2014 Adhésifs - Méthodes d'essai pour adhésifs à conductivité électrique isotrope - Partie 2 : détermination des propriétés électriques pour utilisation dans des assemblages électroniques
NF C32-075-22:1999 Common test methods for cables under fire conditions - Test for resistance to vertical flame propagation for a single insulated conductor or cable - Part 2-2 : procedures - Diffusion flame.
NF EN 61340-4-6:2015 Électrostatique - Partie 4-6 : méthodes d'essai normalisées pour des applications spécifiques - Bracelets de conduction dissipatif
NF EN 60811-410/A1:2017 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 410 : essais divers - Méthode d'essai pour la mesure de la dégradation par oxydation catalytique par le cuivre des conducteurs isolés aux ...
NF EN 60811-410:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 410 : essais divers - Méthode d'essai pour la mesure de la dégradation par oxydation catalytique par le cuivre des conducteurs isolés aux ...
NF L16-013*NF EN 4158:2007 Aerospace series - Paints and varnishes - Test method for measurement of electrical surface resistance of conductive layers
NF EN 3475-306:2006 Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 306 : continuité des conducteurs
NF C32-075-21:1999 Common test methods for cables under fire conditions - Test for resistance to vertical flame propagation for a single insulated conductor or cable - Part 2-1 : procedures - 1 kW pre-mixed flame.

British Standards Institution (BSI), Test method for single-subject conductive adhesive

BS EN ISO 13078:2013 Dentistry. Dental furnace. Test method for temperature measurement with separate thermocouple
BS ISO 16525-7:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Environmental test methods
BS ISO 16525-1:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. General test methods
BS ISO 16525-8:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Electrochemical-migration test methods
BS EN ISO 13078-3:2023 Dentistry. Dental furnace - Test method for the evaluation of high temperature sintering furnace measurement with a separate thermocouple
BS ISO 16525-3:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Determination of heat-transfer properties
BS ISO 16525-5:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Determination of shear fatigue
BS ISO 16525-2:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Determination of electrical characteristics for use in electronic assemblies
BS ISO 16525-6:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Determination of pendulum-type shear impact
BS ISO 16525-9:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Determination of high-speed signal-transmission characteristics
22/30425562 DC BS EN ISO 13078-3. Dentistry. Dental furnace. Part 3. Test method for evaluation of high temperature sintering furnace measurement with separate thermocouple
BS IEC 62951-9:2022 Semiconductor devices. Flexible and stretchable semiconductor devices - Performance testing methods of one transistor and one resistor (1T1R) resistive memory cells
BS IEC 62951-6:2019 Semiconductor devices. Flexible and stretchable semiconductor devices - Test method for sheet resistance of flexible conducting films
BS ISO 16525-4:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Determination of shear strength and electrical resistance using rigid-to-rigid bonded assemblies
BS EN 3475-801:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Capacitance per unit length
PD IEC/TS 62282-7-1:2017 Fuel cell technologies. Test methods. Single cell performance tests for polymer electrolyte fuel cells (PEFC)
BS EN IEC 61189-5-503:2017 Test methods for electrical materials, printed board and other interconnection structures and assemblies - General test method for materials and assemblies. Conductive anodic filaments (CAF) testing of circuit boards
BS EN 60811-410:2012+A1:2017 Electric and optical fibre cables. Test methods for non-metallic materials - Miscellaneous tests. Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors
BS EN ISO 24584:2022 Textiles. Smart textiles. Test method for sheet resistance of conductive textiles using non-contact type
BS ISO 23331:2021 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for total electrical conductivity of conductive fine ceramics
BS ISO 6722-1:2011 Road vehicles. 60 V and 600 V single-core cables. Dimensions, test methods and requirements for copper conductor cables
PD CISPR/TR 30-1:2012 Test method on electromagnetic emissions. Electronic control gear for single- and double-capped fluorescent lamps
20/30423207 DC BS EN IEC 62951-9. Semiconductor devices. Flexible and stretchable semiconductor devices. Part 9. Performance testing methods of one transistor and one resistor (1T1R) resistive memory cells
BS PD IEC/TS 62804-1:2015 Photovoltaic (PV) modules. Test methods for the detection of potential-induced degradation. Crystalline silicon
PD IEC/TR 61189-3-914:2017 Test methods for electrical materials, printed boards and other interconnection structures and assemblies. Test method for thermal conductivity of printed circuit boards for high-brightness LEDs. Guidelines
BS EN 3475-418:2019 Aerospace series. Cables, electrical, aircraft use. Test methods - Thermal endurance for conductors
BS EN IEC 62282-7-2:2021 Tracked Changes. Fuel cell technologies. Test methods. Single cell and stack performance tests for solid oxide fuel cells
BS EN 62047-18:2013 Semiconductor devices. Micro-electromechanical devices. Bend testing methods of thin film materials
BS IEC 62951-1:2017 Semiconductor devices. Flexible and stretchable semiconductor devices - Bending test method for conductive thin films on flexible substrates
BS PD IEC/TS 62282-7-2:2014 Fuel cell technologies. Test methods. Single cell and stack performance tests for solid oxide fuel cells (SOFC)
BS IEC 62047-36:2019 Semiconductor devices. Micro-electromechanical devices - Environmental and dielectric withstand test methods for MEMS piezoelectric thin films
BS EN IEC 63373:2022 Dynamic on-resistance test method guidelines for GaN HEMT based power conversion devices
BS EN 3475-505:2023 Tracked Changes. Aerospace series. Cables, electrical, aircraft use. Test methods. Tensile test on conductors and strands
BS EN IEC 60404-3:2022 Magnetic materials - Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester
BS IEC 62830-5:2021 Semiconductor devices. Semiconductor devices for energy harvesting and generation. Test method for measuring generated power from flexible thermoelectric devices
BS ISO 24070-1:2021 Building and civil engineering sealants. Determination of cured thickness of one-component sealant - Taper-shaped groove test method
20/30376386 DC BS EN ISO 23331. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for total electrical conductivity of conductive fine ceramics
PD IEC/TR 62581:2010 Electrical steel. Methods of measurement of the magnetostriction characteristics by means of single sheet and Epstein test specimens
21/30414377 DC BS EN ISO 24584. Textiles. Smart textiles. Test method for sheet resistance of conductive textiles using non-contact type
18/30355426 DC BS EN 62830-5. Semiconductor devices. Semiconductor devices for energy harvesting and generation. Part 5. Test method for measuring generated power from flexible thermoelectric devices
BS IEC 60747-5-8:2019 Semiconductor devices. Optoelectronic devices. Light emitting diodes. Test method of optoelectronic efficiencies of light emitting diodes
BS IEC 60747-5-15:2022 Semiconductor devices - Optoelectronic devices. Light emitting diodes. Test method of the flat-band voltage based on the electroreflectance spectroscopy
BS EN 2004-1:1993 Test methods for aluminium and aluminium alloy products - Determination of electrical conductivity of wrought aluminium alloys
BS EN 61924:2006 Maritime navigation and radiocommunication equipment and systems - Integrated navigation systems - Operational and performance requirements, methods of testing and required test results
BS IEC 62830-4:2019 Semiconductor devices. Semiconductor devices for energy harvesting and generation - Test and evaluation methods for flexible piezoelectric energy harvesting devices
21/30434332 DC BS EN 63373. Dynamic on-resistance test method guidelines for GaN HEMT based power conversion devices

International Organization for Standardization (ISO), Test method for single-subject conductive adhesive

ISO 13078:2013 Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple
ISO 13078-3:2023 Dentistry — Dental furnace — Part 3: Test method for the evaluation of high temperature sintering furnace measurement with a separate thermocouple
ISO/PRF 13078-3 Dentistry — Dental furnace — Part 3: Test method for the evaluation of high temperature sintering furnace measurement with a separate thermocouple
ISO 4652:2012 Rubber compounding ingredients - Carbon black - Determination of specific surface area by nitrogen adsorption methods - Single-point procedures
ISO 17475:2005 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements

German Institute for Standardization, Test method for single-subject conductive adhesive

DIN EN ISO 13078:2013-05 Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple (ISO 13078:2013); German version EN ISO 13078:2013
DIN EN ISO 13078-3:2023-08 Dentistry - Dental furnace - Part 3: Test method for the evaluation of high temperature sintering furnace measurement with a separate thermocouple (ISO 13078-3:2023); German version EN ISO 13078-3:2023
DIN EN ISO 13078:2013 Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple (ISO 13078:2013); German version EN ISO 13078:2013
DIN EN ISO 13078:2011 Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple (ISO/DIS 13078:2011); German version prEN ISO 13078:2011
DIN 50455-2:1999-11 Testing of materials for semiconductor technology - Methods for the characterisation photoresists - Part 2: Determination of photosensitivity of positive photoresists
DIN 51412-2:2013-01 Testing of petroleum products - Determination of the electrical conductivity - Part 2: Field method
DIN 51412-1:2005-06 Testing of petroleum products - Determination of the electrical conductivity - Part 1: Laboratory method
DIN 13905-1:2004 Dentistry - Dental furnace - Part 1: Dynamic test method for temperature measurement with separate thermocouple
DIN 50431:1988 Testing of semiconductor materials; measurement of the resistivity of silicon or germanium single crystals by means of the four probe/direct current method with collinear array
DIN EN 4158:2007-07 Aerospace series - Paints and varnishes - Test method for measurement of electrical surface resistance of conductive layers; German and English version EN 4158:2006
DIN EN 3475-505:2023-05 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test on conductors and strands; German and English version EN 3475-505:2023
DIN 51627-4:2009 Automotive fuels - Test methods - Part 4: Determination of electrical conductivity in ethanol fuel
DIN EN 61189-5-503:2018-01 Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 5-503: General test method for materials and assemblies - Conductive anodic filaments (CAF) testing of circuit boards (IEC 61189-5-503:2017)...
DIN 50440:1998 Testing of materials for semiconductor technology - Measurement of carrier lifetime in silicon single crystals - Recombination carrier lifetime at low injection by photoconductivity method
DIN EN 3475-306:2007-04 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 306: Continuity of conductors; German and English version EN 3475-306:2005
DIN EN 3475-418:2019-09 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 418: Thermal endurance for conductors; German and English version EN 3475-418:2019 / Note: Applies in conjunction with DIN EN 3475-100 (2011-01).
DIN EN 61338-1-5:2016-04 Waveguide type dielectric resonators - Part 1-5: General information and test conditions - Measurement method of conductivity at interface between conductor layer and dielectric substrate at microwave frequency (IEC 61338-1-5:2015); German version EN 6...
DIN EN 60945:2003 Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results (IEC 60945:2002); German version EN 60945:2002
DIN EN 60945 Berichtigung 1:2010-01 Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results (IEC 60945:2002); German version EN 60945:2002); Corrigendum to DIN EN 60945:2003-07
DIN EN 62047-18:2014-04 Semiconductor devices - Micro-electromechanical devices - Part 18: Bend testing methods of thin film materials (IEC 62047-18:2013); German version EN 62047-18:2013
DIN EN IEC 63373:2023-08 Dynamic on-resistance test method guidelines for GaN HEMT based power conversion devices (IEC 63373:2022); German version EN IEC 63373:2022

Korean Agency for Technology and Standards (KATS), Test method for single-subject conductive adhesive

KS M 6773-2009 Testing method for volume resistivity of electrically conductive rubber and plastic materials
KS M 6773-2014(2019) Testing method for volume resistivity of electrically conductive rubber and plastic materials
KS C 3004-2002 Testing methods for rubber or plastic insulated wires and cables
KS C 2314-2002 TESTING METHOD OF VARNISHED CLOTHS AND TAPES FOR ELECTRICAL INSULATION
KS C 2314-1982 TESTING METHOD OF VARNISHED CLOTHS AND TAPES FOR ELECTRICAL INSULATION
KS P ISO 13078:2019 Dentistry — Dental furnace — Test method for temperature measurement with separate thermocouple
KS D 0257-2002 Measuring of minority - carrier lifetime in silicon single crystal by photoconductive decay method
KS F 2279-2003 METHOD OF TEST FOR ELECTRIC NSULATION OF EQUIPMENT UNIT FOR DWELLINGS
KS D 0260-1999 TESTING METHODS OF RESISTIVITY FOR SINGLE CRYSTAL SILICON WAFERS WITH FOUR-POINT PROBE
KS C 2603-1980(2020) Testing Method for Conductor-Resistance and Resistivity of Metallic Resistance materials
KS L 1620-2013(2018) Test methods for measuring resistivity of electrically conductive ceramic thin films with Van der Pauw method
KS C IEC 61788-21:2020 Superconductivity — Part 21: Superconducting wires — Test methods for practical superconducting wires — General characteristics and guidance
KS R ISO 6722-1-2015(2020) Road vehicles — 60 V and 600 V single-core cables — Part 1: Dimensions, test methods and requirements for copper conductor cables
KS C IEC 60454-2:2019 Pressure-sensitive adhesive tapes for electrical purposes —Part 2: Methods of test
KS D 0260-1989(1994) TESTING METHODS OF RESISTIVITY FOR SINGLE CRYSTAL SILICON WAFERS WITH FOUR-POINT PROBE
KS F 2711-2002 Testing method for electrical indication of concrete’s ability to resist chloride ion penetration
KS F 2711-2017 Standard test method for resistance of concrete to chloride ion penetration by electrical conductance
KS F 2711-2017(2022) Standard test method for resistance of concrete to chloride ion penetration by electrical conductance
KS C IEC 60068-2-82:2012 Environmental testing－Part 2-82：Tests－Test Tx：Whisker test methods for electronic and electric components
KS R ISO 6722-2-2015(2020) Road vehicles — 60 V and 600 V single-core cables — Part 2: Dimensions, test methods and requirements for aluminium conductor cables
KS C IEC TS 62282-7-2:2016 Fuel cell technologies ― Part 7-2: Test methods ― Single cell and stack performance tests for solid oxide fuel cells(SOFC)
KS X IEC 60945:2005 Maritime navigation and radiocommunication equipment and systems-General requirements-Methods of testing and required test results
KS C IEC/TS 62804-1:2016 Photovoltaic(PV) modules — Test methods for the detection of potential-induced degradation — Part 1: Crystalline silicon

European Committee for Standardization (CEN), Test method for single-subject conductive adhesive

EN ISO 13078:2013 Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple
EN 3475-801:2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 801: Capacitance per unit length
EN 4158:2006 Aerospace series - Paints and varnishes - Test method for measurement of electrical surface resistance of conductive layers
prEN ISO 13078-3 Dentistry - Dental furnace - Part 3: Test method for evaluation of high temperature sintering furnace measurement with separate thermocouple (ISO/DIS 13078-3:2022)
EN 3475-505:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test on conductors and strands

NZ-SNZ, Test method for single-subject conductive adhesive

AS/NZS 1660.5.6:2005 Test Methods for Electric Cables, Cords and Conductors Method 5.6: Fire Tests - Test for vertical flame propagation for a single insulated wire or cable
AS/NZS 1660.1:1998 Test Methods for Electric Cables, Cords and Conductors Method 1: Conductors and Metallic Components
AS/NZS 1660.5.5:2005 Test Methods for Electric Cables, Cords and Conductors Method 5.5: Fire Tests - Circuit integrity
AS/NZS 1660.5.4:1998 Test Methods for Electric Cables, Cords and Conductors Method 5.4: Fire Tests - Determination of Degree of Acidity of Gases Evolved During the Combustion of Materials Taken from Electric Cables by Measuring pH and Conductivity
AS/NZS 1660.5.2:2006 Test methods for electric cables, cords and conductors Method 5.2: Fire testsMeasurement of smoke density of cables burning under defined conditions
AS/NZS 1660.5.3:1998 Test Methods for Electric Cables, Cords and Conductors Method 5.3: Fire Tests - Determination of the Amount of Halogen Acid Gas Evolved During the Combustion of Polymeric Materials Taken from Cables
AS/NZS 1660.2.4:1998 Test Methods for Electric Cables, Cords and Conductors Method 2.4: Insulation, Extruded Semi-Conductive Screens and Non-Metallic Sheaths - Methods Specific to Polyethylene and Polypropylene Materials (Incorporating Amendment 1: 07/2001)

American National Standards Institute （ANSI), Test method for single-subject conductive adhesive

ANSI/ADA 163-2018 Dental Furnace – Part 1: Test Method for Temperature Measurement with Separate Thermocouple
ANSI/ASA S2.32-1982 Methods for the Experimental Determination of Mechanical Mobility, Part 2: Measurements Using Single-Point Translational Excitation
ANSI/ASTM B63:2001 Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials
ANSI/ASTM D4308:2013 Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
ANSI/ASTM D257:2014 Standard Test Methods for DC Resistance or Conductance of Insulating Materials
ANSI/ASTM D4308:2021 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
ANSI/ASTM D2624:2021 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ANSI/ASTM D6095:2012 Test Method for Longitudinal Measurement of Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials

BR-ABNT, Test method for single-subject conductive adhesive

ABNT MB-125-1958

Professional Standard - Machinery, Test method for single-subject conductive adhesive

JB/T 6307.2-1992 Test method for power semiconductor module Single-phase bridge rectifier diodes
JB/T 6307.5-1994 Power Semiconductor Module Test Methods Bipolar Transistors Single-Phase Bridge and Three-Phase Bridge

CZ-CSN, Test method for single-subject conductive adhesive

CSN 35 8548-1969 Methods of testing admittance of electron ic tubes
CSN 35 8537-1968 Methods of testing mutual conductance of eleotronio tubes
CSN 35 8538-1968 Methods of testing conversion transconductance of eleetronic tubes
CSN 34 6319-1987 Testing of ceramic electrotechnic materials. Methods of the determination of medium specific heat, thermal conductivity and medium temperature conductivity
CSN 35 6553 Z1-1997
CSN 37 1340-1985 Connecting and ending elements for power cables and conductors. Technical requirements and testing methods
CSN 30 4011-1993 Road vehicles. Electromagnetic compatibility. Electrical transient conduction along supply lines. Requirements and test methods
CSN 36 6150-1987 Telegraph apparatus wiih 5 element code. Basic parameters, lechnica! requirements and lesting methods

Indonesia Standards, Test method for single-subject conductive adhesive

SNI 09-4406-1997 Test method of speedometers for motor cycles
SNI 09-4405-1997 Test method for driving perfomance of motor cycle

Professional Standard - Electron, Test method for single-subject conductive adhesive

SJ 2857.2-1988 Methods for measurement of thermoelectric refrigeration materials properties--Methods for measurements of conductivity
SJ 2355.4-1983 Methods of measurement for junction capacitance of light-emitting devices
SJ 2355.3-1983 Method of measurement for reverse current of light-emitting devices
SJ 2857.1-1988 Methods for measurement of thermoelectric refrigeration materials properties--Methods for measurement of thermal conductivity
SJ 2658.4-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for capacitance
SJ 1388-1978 Methods of measurement for anode conductance of noise-generator diodes
SJ/T 11499-2015 Test method for measuring electrical properties of monocrystalline silicon carbide
SJ 2658.5-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for forward series resistance
SJ/T 10482-1994 Test method for characterizing semiconductor deep levels by transient capacitance techniques
SJ 2214.3-1982 Method of measurement for dark current of semiconductor photodiodes
SJ 2214.5-1982 Method of measurement for junction capacitance of semiconductor photodiodes
SJ 2214.8-1982 Method of measurement for dark current voltage of semiconductor phototransistors
SJ/Z 9010.12-1987 Measurements of electrical properties of electronic tubes and valves--Part 12: Methods of measuring for electrode resistance, transcondductance, amplification factor, conversion resistance and conversion transconductance
SJ/T 10735-1996 Semiconductor integrated circuits General principles of measuring methods for TTL circuits
SJ/T 10736-1996 Semiconductor integrated circuits - General principles of measuring methods for HTL circuits
SJ/T 10737-1996 Semiconductor integrated circuits - General principles of measuring methods for ECL circuits
SJ/T 10741-2000 Semiconductor integrated circuits General principles of measuring methods for CMOS circuits
SJ/T 10741-1996 Semiconductor integrated circuits--General principles of measuring methods for CMOS circuits
SJ 2214.10-1982 Method of measurement for light current of semiconductor photodiodes and phototransistors
SJ 2215.6-1982 Method of measurement for junction capacitance of semiconductor photocouplers (diodes)
SJ/T 10804-2000 Semiconductor integrated circuits.General principles of measuring methods for level translator
SJ/T 10805-2000 Semiconductor integrated circuits.General principles of measuring methods for voltage comparators
SJ/T 10803-1996 Semiconductor integrated circuits used as interface circuits - General principles of measuring methods for line circuits
SJ 2215.3-1982 Method of measurement for forward current of semiconductor photocouplers (diodes)
SJ 2214.4-1982 Method of measurement for reverse break-down voltage of semiconductor photodiodes
SJ 2215.4-1982 Method of measurement for reverse current of semiconductor photocouplers (diodes)
SJ 2215.10-1982 Method of measurement for direct current transfer ratio of semiconductor photocouplers
SJ 2215.12-1982 Method of measurement for input-to-output capacitance of semiconductor photocouplers
SJ 2215.13-1982 Method of measurement for input-to-output isolation resistance of semiconductor photocouplers
SJ/Z 9011.3-1987 Measurement of photosensitive components Part 3 Methods of measurement for photoconductive cells for visible spectra
SJ/T 11005-1996 Semiconductor TV integrated circuits - General principles of measuring methods for audio channel circuits
SJ/T 11006-1996 Semiconductor TV integrated circuits - General principles of measuring methods for horizontal and vertical sweep circuits
SJ/T 11004-1996 Semiconductor TV integrated circuits - General principles of measuring methods for picture channel circuits
SJ/T 10738-1996 Semiconductor integrated circuits - General principles of measuring methods for operational (voltage) amplifiers
SJ/T 10805-1996 Semiconductor integrated circuits used as interface circuits--General principles of measuring methods of voltage comparators
SJ/T 10804-1996 Semiconductor integrated circuits used as interface circuits--General principles of measuring methods for level translator
SJ 2215.5-1982 Method of measurement for reverse breakdown voltage of semiconductor photocouplers (diodes)
SJ 2215.9-1982 Method of measurement for reverse cut-off current of semiconductor photocouplers transistors
SJ/T 10882-1996 Semiconductor integrated circuits - General principles of measuring methods for linear amplifiers
SJ/T 10401-1993 General principles of measuring methods for motor speed stablizers of semiconductor audio integrated circuits
SJ/T 10402-1993 General principles of measuring methods for automatic music selectors of semiconductor audio integrated circuits
SJ/T 10400-1993 General principles of measuring methods for graphic equalizers of semiconductor audio integrated circuits
SJ 2215.7-1982 Method of measurement for collector-emitter reverse breakdown voltage of semiconductor photocouplers (diodes)
SJ/T 10739-1996 Semiconductor integrated circuits - General principles of measuring methods for MOS random access memories
SJ/T 10427.1-1993 Grneral Principles of measuring methods of FM converter for semiconductor audio integrated circuits
SJ/T 10427.2-1993 General principles of measuring methods of intermediate-frequency amplifier for semiconductor audio integrated circuits
SJ 2214.6-1982 Method of measurement for collector-emitter reverse breakdown voltage of semiconductor phototransistors
SJ/T 10881-1996 Semiconductor integrated audio circuits - General principles of measuring methods for stereo decoders
SJ 1790-1981 Method of measurement for overload current multiplication factor of silicon single phase bridge rectifiers,up to 5A
SJ/T 10800-1996 Semiconductor integrated circuits used as interface circuits - General principles of measuring methods for sense amplifiers
SJ/T 10802-1996 Semiconductor integrated circuits used as interface circuits - General principles of measuring methods for peripheral drivers
SJ/T 10806-1996 Semiconductor integrated circuits used as interface circuits - General principles of measuring methods for display drivers
SJ 3249.1-1989 Methods of measurement for resistivity of semi-insulation Gallium arsenide and Indium phosphide single crystal material
SJ/T 10740-1996 Semiconductor integrated circuits - General principles of measuring methods for bipolar random access memories
SJ/T 10880-1996 Semiconductor integrated audio circuits - General principles of measuring methods for stereo decoders
SJ/T 11007-1996 Semiconductor TV integrated circuits - General principles of measuring methods for video signal and chrominance signal processing circuits
SJ/T 10879-1996 Semiconductor integrated audio circuits - General principles of measuring methods for audio preamplifiers

PL-PKN, Test method for single-subject conductive adhesive

PN C05014-1988 Test methods for adhesion of rubber to single-strand wire
PN E04160-68-1988 Electric cables Methods of test Electrical test of conducting polymeric screen
PN E04160 ArkusZ84-1973 Bectric cables Methods ot testing Measuring ot the transfer admi??ance due to electric coupling
PN C82055-11-1989 Test methods of pressed carbon products Determination of thermal specific conductivity with comparative method
PN C94116-1986 Ebonite containers, lids, monolids and cQvers for starting batteries and motocycle batteries Specification and test methods

FI-SFS, Test method for single-subject conductive adhesive

RO-ASRO, Test method for single-subject conductive adhesive

STAS SR 11388-2000 Common test methods for electric cables and conductors
STAS 11388/10-1985 WIKES AND CABLES METHODS OF TEST Specific tests for covers of clastomeric compounds

IN-BIS, Test method for single-subject conductive adhesive

VE-FONDONORMA, Test method for single-subject conductive adhesive

Shanghai Provincial Standard of the People's Republic of China, Test method for single-subject conductive adhesive

DB31/ 513-1992 Vulcanized rubber -- Antistatic and conductive rubber products for anesthesia machines -- Method for determination of electrical resistance

ES-UNE, Test method for single-subject conductive adhesive

UNE-EN ISO 13078-3:2023 Dentistry - Dental furnace - Part 3: Test method for the evaluation of high temperature sintering furnace measurement with a separate thermocouple (ISO 13078-3:2023) (Endorsed by Asociación Española de Normalización in July of 2023.)
UNE-EN 4158:2006 Aerospace series - Paints and varnishes - Test method for measurement of electrical surface resistance of conductive layers (Endorsed by AENOR in March of 2007.)
UNE-EN 62047-22:2014 Semiconductor devices - Micro-electromechanical devices - Part 22: Electromechanical tensile test method for conductive thin films on flexible substrates (Endorsed by AENOR in November of 2014.)
UNE-EN IEC 63373:2022 Dynamic on-resistance test method guidelines for GaN HEMT based power conversion devices (Endorsed by Asociación Española de Normalización in May of 2022.)
UNE-EN 3475-505:2023 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test on conductors and strands (Endorsed by Asociación Española de Normalización in April of 2023.)
UNE-EN IEC 62282-7-2:2021 Fuel cell technologies - Part 7-2: Test methods - Single cell and stack performance tests for solid oxide fuel cells (SOFCs) (Endorsed by Asociación Española de Normalización in September of 2021.)
UNE-EN 3475-418:2019 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 418: Thermal endurance for conductors (Endorsed by Asociación Española de Normalización in August of 2019.)
UNE-EN 3475-306:2005 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 306: Continuity of conductors (Endorsed by AENOR in December of 2005.)
UNE-EN 62047-18:2013 Semiconductor devices - Micro-electromechanical devices - Part 18: Bend testing methods of thin film materials (Endorsed by AENOR in November of 2013.)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Test method for single-subject conductive adhesive

GB/T 3789.6-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of transconductance and amplification factor
GB/T 43226-2023 Single-event soft error time domain testing method for semiconductor integrated circuits used in aerospace applications
GB/T 13789-2008 Methods of measurement of the magnetic properties of magnetic sheet and strip by means a single sheet tester
GB/T 13789-2022 Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester
GB/T 14030-1992 General principles of measuring methods of timer circuits for semiconductor integrated circuits
GB 14030-1992 Basic principles of semiconductor integrated circuit time-based circuit testing methods
GB/T 11297.7-1989 Test method for resistivity and Hall coefficient in InSb single crystals
GB 11297.7-1989 Test Method for InSb Single Crystal Resistivity and Hall Coefficient
GB/T 6798-1996 Semiconductor integrated circuits. General principles of measuring methods of voltage comparators
GB/T 4377-1996 Semiconductor integrated circuits. General principles of measuring methods of voltage regulator
GB/T 14029-1992 General principles of measuring methods of analogue multiplier for semiconductor integrated circuits
GB 14029-1992 Basic principles of semiconductor integrated circuit analog multiplier testing methods
GB/T 42271-2022 Test method for resistivity of semi-insulating monocrystalline silicon carbide by contactless measurement
GB/T 15136-1994 General principles of measuring methods for quartz clock and watch circuits of semiconductor integrated circuits
GB/T 14028-1992 General principles of measuring methods of analogue switches for semiconductor integrated circuits
GB 14028-2018 Basic principles of semiconductor integrated circuit analog switch test methods
GB 3442-1986 Basic principles of semiconductor integrated circuit operational (voltage) amplifier testing methods
GB/T 14031-1992 General principles of measuring methods of analogue phase-loop for semiconductor integrated circuits
GB/T 14032-1992 General principles of measuring methods of digital phase-locked loop for semiconductor integrated circuits
GB 14031-1992 Basic principles of semiconductor integrated circuit analog phase-locked loop testing methods
GB 14032-1992 Basic principles of digital phase-locked loop testing methods for semiconductor integrated circuits
GB/T 21216-2007 Insulating liquids.Determination of the dielectric dissipation factor by measurement of the conductance and capacitance.Test method
GB/T 17626.24-2012 Electromagnetic compatibility.Testing and measurement techniques.Test methods for protective devices for HEMP conducted disturbance
GB/T 14115-1993 General principles of measuring methods of Sample/Hold amplifiers for semiconductor integrated circuits
GB/T 14114-1993 General principles of measuring methods of V/F and F/V converters for semiconductor integrated circuits
GB/T 24196-2009 Corrosion of metals and alloys.Electrochemical test methods.Cuidelines for conducting potentiostatic and potentiodynamic polarization measurements
GB/T 12843-1991 General principle of measuring methods of microprocessors and peripheral interface circuits' parameters for semiconductor integrated circuits
GB 12843-1991 Basic principles of electrical parameter testing methods for semiconductor integrated circuit microprocessors and peripheral interface circuits
GB/T 6800-1986 General principles of measuring methods of audio power amplifiers for semiconductor audio integrated circuits

KR-KS, Test method for single-subject conductive adhesive

KS P ISO 13078-2019 Dentistry — Dental furnace — Test method for temperature measurement with separate thermocouple
KS P ISO 13116-2022 Dentistry — Test method for determining radio-opacity of materials
KS C IEC 61788-21-2020 Superconductivity — Part 21: Superconducting wires — Test methods for practical superconducting wires — General characteristics and guidance
KS C IEC 60454-2-2019 Pressure-sensitive adhesive tapes for electrical purposes —Part 2: Methods of test
KS M ISO 6297-2003(2023)

Danish Standards Foundation, Test method for single-subject conductive adhesive

DS/EN ISO 13078:2013 Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple
DS/EN 4158:2007 Aerospace series - Paints and varnishes - Test method for measurement of electrical surface resistance of conductive layers
DS/EN IEC 62282-7-2:2021 Fuel cell technologies – Part 7-2: Test methods – Single cell and stack performance tests for solid oxide fuel cells (SOFCs)
DS/IEC/TS 62282-7-1:2012 Fuel cell technologies - Part 7-1: Single cell test methods for polymer electrolyte fuel cell (PEFC)
DS/EN 60945:2002 Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results
DS/EN 3475-801:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 801: Capacitance per unit length
DS/EN 61924:2006 Maritime navigation and radiocommunication equipment and systems – Integrated navigation systems – Operational and performance requirements, methods of testing and required test results

AENOR, Test method for single-subject conductive adhesive

UNE-EN ISO 13078:2013 Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple (ISO 13078:2013)
UNE 208001-30:2002 Test method on electromagnetic emissions from electronic ballasts for single- and double-capped fluorescent lamps.
UNE 22071:1992 HOSES FOR PNEUMATIC BLASTING LOADING. ELECTRIC CONDUCTIVITY. TESTING METHOD AND SPECIFICATIONS.
UNE-EN 60945:2003 Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results

Professional Standard - Energy, Test method for single-subject conductive adhesive

Military Standard of the People's Republic of China-General Armament Department, Test method for single-subject conductive adhesive

GJB 1047.2-1990 Test Methods for Black Powder - Determination of Potassium Nitrate Conductivity Method
GJB 1047.2A-2004 Test Methods for Black Powder Part 2: Determination of Conductivity Method for Potassium Nitrate
GJB 1047.2A-2020 Test methods for black powder Part 2: Determination of potassium nitrate content Conductometric method

AT-ON, Test method for single-subject conductive adhesive

ONORM DIN 19261-1981

Group Standards of the People's Republic of China, Test method for single-subject conductive adhesive

T/ZGIA 001-2019 Graphene test method for the determination of powder conductivity four-probe method

ZA-SANS, Test method for single-subject conductive adhesive

SANS 6282-1:2007 Test methods for bare conductors and conductors of insulated electric cables Part 1: Conductor resistance
SANS 6282-3:2007 Test methods for bare conductors and conductors of insulated electric cables Part 3: Mechanical tests
SANS 6281-1:2007 Test methods for impregnated paper-insulated electric cables Part 1: Tests on insulating and semi-conducting paper
SANS 6284-2:2007 Test methods for cross-linked polyethylene (XLPE) insulated electric cables Part 2: Tests on extruded semi-conducting screens
SANS 6282-2:2007 Test methods for bare conductors and conductors of insulated electric cables Part 2: Quality of metallic coatings

AASHTO - American Association of State Highway and Transportation Officials, Test method for single-subject conductive adhesive

TP 119-2015 Standard Method of Test for Electrical Resistivity of a Concrete Cylinder Tested in a Uniaxial Resistance Test

The American Road & Transportation Builders Association, Test method for single-subject conductive adhesive

AASHTO TP 119-2015 Standard Method of Test for Electrical Resistivity of a Concrete Cylinder Tested in a Uniaxial Resistance Test
AASHTO TP 119-2021 Standard Method of Test for Electrical Resistivity of a Concrete Cylinder Tested in a Uniaxial Resistance Test

European Committee for Electrotechnical Standardization（CENELEC）, Test method for single-subject conductive adhesive

EN 60749-44:2016 Semiconductor devices - Mechanical and climatic test methods - Part 44: Neutron beam irradiated single event effect (SEE) test method for semiconductor devices
EN 61189-5-503:2017 Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 5-503: General test method for materials and assemblies - Conductive anodic filaments (CAF) testing of circuit boards
EN IEC 62282-7-2:2021 Fuel cell technologies - Part 7-2: Test methods - Single cell and stack performance tests for solid oxide fuel cells (SOFCs)
EN 62047-13:2012 Semiconductor devices - Micro-electromechanical devices - Part 13: Bend- and shear - type test methods of measuring adhesive strength for MEMS structures

Institute of Electrical and Electronics Engineers (IEEE), Test method for single-subject conductive adhesive

IEEE 2828-2021 Guide for Measuring Method of Overhead Power Transmission Line Galloping Based on Monocular Video
IEEE 190-1960 IEEE Standard Methods of Testing Monochrome Television Broadcast Receivers
IEEE Std 190-1960 IEEE Standard Methods of Testing Monochrome Television Broadcast Receivers

Japanese Industrial Standards Committee (JISC), Test method for single-subject conductive adhesive

JIS K 6330-5:1998 Testing methods for rubber and plastics hoses -- Part 5: Determination of electrical resistance
JIS K 7194:1994 Testing method for resistivity of conductive plastics with a four-point probe array
JIS K 6404-2-2:1999 Testing methods for rubber-or plastics-coated fabrics -- Determination of roll characteristics -- Part 2: Methods for determination of the total mass per unit area, coating mass per unit area, and mass per unit area of the substrate
JIS C 2556:2015 Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester
JIS R 1637:1998 Test method for resistivity of conductive fine ceramic thin films with a four-point probe array
JIS F 0812:2006 Maritime navigation and radiocommunication equipment and systems -- General requirements -- Methods of testing and required test results

YU-JUS, Test method for single-subject conductive adhesive

JUS G.E0.055-1991 Rubers and plastic. Electrical conductivity of antistatic endless synchronous belts. Characteristics and test method
JUS N.R4.482-1987 Electromechanicd components for electronic equipment. Test metho?s. Test 2h: Resistance (earthing) from actuator to mounting bushing (surface)

International Electrotechnical Commission (IEC), Test method for single-subject conductive adhesive

IEC 62951-9:2022 Semiconductor devices - Flexible and stretchable semiconductor devices - Part 9: Performance testing methods of one transistor and one resistor (1T1R) resistive memory cells
IEC 60404-3:2010 Magnetic materials – Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester (Edition 2.2 Consolidated Reprint)
IEC 61189-5-1:2016 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-1: General test methods for materials and assemblies - Guidance for printed board ass
IEC 60945:2002 Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results

TR-TSE, Test method for single-subject conductive adhesive

TS 2452-1976 MEASUBEMENTS OF THE ELECTRICAL PROPERTIES OF EIJECTRONIC TUBES AND VALVES PART 12 : METHODS OF MEASURING ELECTRODE RESISTANCE, TRANSCONDUCTANE, AMPLIFICATION FACTOR, CONVERSION RESISTANCE AND CONVERSION TRANSCONDUCTANCE
TS 2783-1977 Methods Of Test For General Purpose Electrical Cables With Aluminium Or Aluminium Alloy Conductors For Aircraft

Anhui Provincial Standard of the People's Republic of China, Test method for single-subject conductive adhesive

DB34/T 3770-2020 Test method for electrical testing of composite insulators for use in superconducting magnet systems

CENELEC - European Committee for Electrotechnical Standardization, Test method for single-subject conductive adhesive

EN 50265-2-2:1998 Common Tests Methods for Cable under Fire Conditions - Test for Resistance to Vertical Flame Propagation for a Single Insulated Conductor or Cable Part 2-2: Procedures - Diffusion Flame
EN 50265-2-1:1998 Common Test Methods for Cables under Fire Conditions - Test for Resistance to Vertical Flame Propagation for a Single Insulated Conductor or Cable Part 2-1: Procedures - 1 kW Pre-Mixed Flame
EN 50265-1:1998 Common Test Methods for Cables under Fire Conditions - Test for Resistance to Vertical Flame Propagation for a Single Insulated Conductor or Cable Part 1: Apparatus
HD 22.2 S2/ A1-1989 AMD 1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V - Part 2: Test Methods
HD 22.2 S2/ A3-1990 AMD 3 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V - Part 2: Test Methods
HD 22.2 S2/ A2-1990 AMD 2 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V - Part 2: Test Methods

未注明发布机构, Test method for single-subject conductive adhesive

BS EN 50265-2-2:1999 Common test methods for cables under fire conditions - Test for resistance to vertical flame propagation for a single insulated conductor or cable - Part 2-2 : Procedures - Diffusion flame
BS EN 50265-2-1:1999 Common test methods for cables under fire conditions - Test for resistance to vertical flame propagation for a single insulated conductor or cable - Part 2-1 : Procedures -1 kW pre - mixed flame
BS EN 4158:2006(2007) Aerospace series — Paints and varnishes — Test method for measurement of electrical surface resistance of conductive layers
BS EN 50265-1:1999 Common test methods for cables under fire conditions - Test for resistance to vertical flame propagation for a single insulated conductor or cable - Part 1: Apparatus
DIN EN 160200-2:1998 Microwave modular electronic units of assessed quality — Part 2: Index of test methods

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Test method for single-subject conductive adhesive

IPC 9691A-2007 User Guide for the IPC-TM-650, Method 2.6.25, Conductive Anodic Filament (CAF) Resistance Test (Electrochemical Migration Testing)

BE-NBN, Test method for single-subject conductive adhesive

NBN-HD 022.2-1994
NBN-HD 022.2-1993 Rubber insulated cables of rated voltages up to and including 450/750 V. Part 2: Test methods

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Test method for single-subject conductive adhesive

PREN 3003-2002 Aerospace series Non-Metallic materials Structural adhesives Determination of mass per unit area of film adhesives Test method (Edition P 1)
PREN 4426-1998 Aerospace Series Textiles Test Method Determination of Conductivity and pH of Aqueous Extracts
PREN 3475-505-2010 Aerospace series Cables@ electrical@ aircraft use Test methods Part 505: Tensile test on conductors and strands (Edition P 3)
PREN 3475-505-2006 Aerospace series Cables@ electrical@ aircraft use Test methods Part 505: Tensile test on conductors and strands (Edition P 2)
PREN 4158-2005 Aerospace series Paints and varnishes Test method for measurements of electrical surface resistance of conductive layers (Edition P 1)

Lithuanian Standards Office , Test method for single-subject conductive adhesive

LST EN 4158-2007 Aerospace series - Paints and varnishes - Test method for measurement of electrical surface resistance of conductive layers
LST EN 10280+A1-2007 Magnetic materials - Methods of measurement of the magnetic properties of electrical sheet and strip by means of a single sheet tester
LST EN 3475-801-2003 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 801: Capacitance per unit length

SAE - SAE International, Test method for single-subject conductive adhesive

SAE ARP6248-2016 Stripline Test Method to Characterize the Shielding Effectiveness of Conductive EMI Gaskets up to 40 GHz

Society of Automotive Engineers (SAE), Test method for single-subject conductive adhesive

SAE ARP6248-2022 Stripline Test Method to Characterize the Shielding Effectiveness of Conductive EMI Gaskets up to 40 GHz

Professional Standard - Post and Telecommunication, Test method for single-subject conductive adhesive

YD/T 2001.2-2011 Semiconductor optoelectronic devices for fibre optic system applications.part 2:measuring methods

ICEA - Insulated Cable Engineers Association Inc., Test method for single-subject conductive adhesive

P-123-739-2018 Guide To Establish Electrical Test Methods for Non-Conducting Jacket Materials for Power Cables Rated 5 to 500 kV

IX-IX-IEC, Test method for single-subject conductive adhesive

IEC 61000-4-24:2015/AMD1:2023 CSV Electromagnetic compatibility (EMC) - Part 4-24: Testing and measurement techniques - Test methods for protective devices for HEMP conducted disturbance

Aerospace, Security and Defence Industries Association of Europe (ASD), Test method for single-subject conductive adhesive

ASD-STAN PREN 4158-2005 Aerospace series Paints and varnishes Test method for measurements of electrical surface resistance of conductive layers (Edition P 1)

GOSTR, Test method for single-subject conductive adhesive

GOST R IEC 60945-2007 Maritime navigation and radiocommunication equipment and systems. General requirements. Methods of testing and required test results

ES-AENOR, Test method for single-subject conductive adhesive

UNE 20-606 Pt.2-1982

International Telecommunication Union (ITU), Test method for single-subject conductive adhesive

ITU-T K.84-2011 (Pre-Published) Test methods and guide against information leaks through unintentional EM emissions

RU-GOST R, Test method for single-subject conductive adhesive

GOST IEC 60034-2-2-2014 Rotating electrical machines. Part 2-2. Specific methods for determining separate losses of large machines from tests