ZH
RU
ES

Single subject conductive adhesive test method

Single subject conductive adhesive test method, Total:500 items.

In the international standard classification, Single subject conductive adhesive test method involves: Medical equipment, Adhesives, Dentistry, Rubber, Semiconductor devices, Insulating materials, Raw materials for rubber and plastics, Photography, Meat, meat products and other animal produce, Rectifiers. Convertors. Stabilized power supply, Road vehicle systems, Printed circuits and boards, Motor cycles and mopeds, Electrical wires and cables, Optoelectronics. Laser equipment, Space systems and operations, Surface treatment and coating, Semiconducting materials, Testing of metals, Non-destructive testing, Materials for aerospace construction, Construction materials, Electronic tubes, Radiation measurements, Optics and optical measurements, Insulating fluids, Analytical chemistry, Conducting materials, Telecommunication systems, Components and accessories for telecommunications equipment, Protection against fire, Continuous handling equipment, Water quality, Integrated circuits. Microelectronics, Fuel cells, Electricity. Magnetism. Electrical and magnetic measurements, Refractories, Nuclear energy engineering, Galvanic cells and batteries, Earthworks. Excavations. Foundation construction. Underground works, Vocabularies, Aerospace electric equipment and systems, Test conditions and procedures in general, Environmental testing, Protection of and in buildings, Body care equipment, Organic chemicals, Piezoelectric and dielectric devices, Metrology and measurement in general, Fuels, Components for electrical equipment, Electronic component assemblies, Plastics, Components for aerospace construction, Thermodynamics and temperature measurements, Aerosol containers, Rubber and plastics products, Products of the textile industry, Electrical accessories, Geology. Meteorology. Hydrology, Electromagnetic compatibility (EMC), Magnetic materials, Ceramics, Textile fibres, Astronomy. Geodesy. Geography, Radiocommunications, Mobile services, Environmental protection, Paint coating equipment, Solar energy engineering, Power stations in general, Power transmission and distribution networks.

Professional Standard - Aerospace, Single subject conductive adhesive test method

QJ 1523-1988 Conductive Adhesive Resistivity Test Method
QJ 259-1977 器件
QJ 257-1977 Semiconductor TTL Integrated Digital Circuit Testing Method
QJ 1528-1988 Semiconductor integrated circuit time base test method
QJ 260-1977 器件
QJ 20022-2011 The electrical measuring method of radome for passive seeker
QJ 1460-1988 Test method for broadband amplifier of semiconductor integrated circuit
QJ 2491-1993 Test methods for operational amplifiers in semiconductor integrated circuits
QJ 2428-1993 Electromagnetic Compatibility Test Method for Tactical Missile Weapon System
QJ 2660-1994 Test method for pulse width modulator of semiconductor integrated circuit switching power supply
QJ 1526-1988 器件

Standard Association of Australia （SAA）, Single subject conductive adhesive test method

AS 2836.0:1998 Methods of testing surgical dressings and surgical dressing materials - General introduction and list of methods
AS 2836.3:1998 Methods of testing surgical dressing and surgical dressing materials - Method for the determination of mass per unit area
AS 2836.2:1998 Methods of testing surgical dressing and surgical dressing materials - Method for the identification of cotton and viscose fibres
AS/NZS 1660.3:1998 Test methods for electric cables, cords and conductors - Electrical tests
AS/NZS 2350.0:1999 Methods of testing portland and blended cements - General introduction and list of methods
AS/NZS 2098.10:1995 Methods of test for veneer and plywood Method 10:Measurement of dimensions and shape for structural laminated veneer lumber
AS 1683.23:2000 Methods of test for elastomers - Rubber - Vulcanized - Determination of resistance to liquids
AS/NZS 1660.2.2:1998 Test methods for electric cables, cords and conductors - Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to elastomeric, XLPE and XLPVC materials
AS 2313.4.3:2006 Methods of test for single sided and double sided pressure-sensitive adhesive tape - Printing properties - Determining abrasive resistance
AS/NZS 1660.2.5:1998 Test methods for electric cables, cords and conductors - Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to cables above 1 kV

American Society for Testing and Materials (ASTM), Single subject conductive adhesive test method

ASTM D2739-97 Standard Test Method for Volume Resistivity of Conductive Adhesives
ASTM D991-89(2005) Standard Test Method for Rubber Property-Volume Resistivity Of Electrically Conductive and Antistatic Products
ASTM D4325-20 Standard Test Methods for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
ASTM D1871-98 Standard Test Methods for Adhesion of Single-Filament Steel Wire to Rubber
ASTM G105-16 Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests
ASTM D2739-97(2010) Standard Test Method for Volume Resistivity of Conductive Adhesives
ASTM D4399-05 Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
ASTM D4399-05(2023) Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
ASTM D4325-97 Standard Test Methods for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
ASTM D4325-02 Standard Test Methods for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
ASTM D4325-08 Standard Test Methods for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
ASTM D4325-13 Standard Test Methods for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
ASTM B342-63(1980)e1 Test Method for Electrical Conductivity by Use of Eddy Currents
ASTM D5902-05(2010) Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value
ASTM D4496-21 Standard Test Method for D-C Resistance or Conductance of Moderately Conductive Materials
ASTM D4399-90(1999) Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
ASTM B193-02 Standard Test Method for Resistivity of Electrical Conductor Materials
ASTM B193-00 Standard Test Method for Resistivity of Electrical Conductor Materials
ASTM B193-01 Standard Test Method for Resistivity of Electrical Conductor Materials
ASTM D1125-95(1999) Standard Test Methods for Electrical Conductivity and Resistivity of Water
ASTM B193-87(1992) Standard Test Method for Resistivity of Electrical Conductor Materials
ASTM B193-19 Standard Test Method for Resistivity of Electrical Conductor Materials
ASTM B193-87 Standard Test Method for Resistivity of Electrical Conductor Materials
ASTM B193-20 Standard Test Method for Resistivity of Electrical Conductor Materials
ASTM D991-89(2010) Standard Test Method for Rubber Property-Volume Resistivity Of Electrically Conductive and Antistatic Products
ASTM E1004-09 Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy-Current) Method
ASTM D4399-05e1 Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
ASTM D4399-05(2011) Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
ASTM D4399-05(2017) Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
ASTM D2228-04(2019) Standard Test Method for Rubber Property—Relative Abrasion Resistance by Pico Abrader Method
ASTM D2167-94(2001) Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method
ASTM F76-86(1996)e1 Standard Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility in Single-Crystal Semiconductors
ASTM F76-86(2002) Standard Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility in Single-Crystal Semiconductors
ASTM F76-08 Standard Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility in Single-Crystal Semiconductors
ASTM E1004-17 Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method
ASTM D2167-08 Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method
ASTM F1896-10 Test Method for Determining the Electrical Resistivity of a Printed Conductive Material
ASTM C483-95(2000) Standard Test Method for Electrical Resistance of Conductive Ceramic Tile (Withdrawn 2004)
ASTM D2148-02 Standard Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation
ASTM D2148-18 Standard Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation
ASTM D2148-19e1 Standard Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation
ASTM D2148-19 Standard Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation
ASTM D991-89(2000)e1 Standard Test Method for Rubber Property-Volume Resistivity Of Electrically Conductive and Antistatic Products
ASTM D991-89(2020) Standard Test Method for Rubber Property—Volume Resistivity Of Electrically Conductive and Antistatic Products
ASTM D991-89(2014) Standard Test Method for Rubber Property—Volume Resistivity Of Electrically Conductive and Antistatic Products
ASTM D5128-90(1999)e1 Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
ASTM F76-08(2016)e1 Standard Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility in Single-Crystal Semiconductors
ASTM F1896-98 Test Method for Determining the Electrical Resistivity of a Printed Conductive Material
ASTM D5128-90(2005) Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
ASTM D5128-09 Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
ASTM F76-08(2016) Standard Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility in Single-Crystal Semiconductors
ASTM D4747-87(1996)e1 Standard Test Method for Determining Unreacted Monomer Content of Latexes Using Gas-Liquid Chromatography
ASTM D4747-02 Standard Test Method for Determining Unreacted Monomer Content of Latexes Using Gas-Liquid Chromatography
ASTM D4747-02(2014) Standard Test Method for Determining Unreacted Monomer Content of Latexes Using Gas-Liquid Chromatography
ASTM D4747-02(2008) Standard Test Method for Determining Unreacted Monomer Content of Latexes Using Gas-Liquid Chromatography
ASTM F1896-98(2004) Test Method for Determining the Electrical Resistivity of a Printed Conductive Material
ASTM F1896-16 Test Method for Determining the Electrical Resistivity of a Printed Conductive Material
ASTM F616M-96 Standard Test Method for Measuring MOSFET Drain Leakage Current (Metric)
ASTM F616M-96(2003) Standard Test Method for Measuring MOSFET Drain Leakage Current (Metric)
ASTM D2167-94 Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method
ASTM D2624-09 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM E1161-95 Standard Test Method for Radiologic Examination of Semiconductors and Electronic Components
ASTM D2624-00 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM D4827-93(1998) Standard Test Method for Determining the Unreacted Monomer Content of Latexes Using Capillary Column Gas Chromatography
ASTM D4827-03(2015) Standard Test Method for Determining the Unreacted Monomer Content of Latexes Using Capillary Column Gas Chromatography
ASTM C1702-23 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM D257-14(2021)e1 Standard Test Methods for DC Resistance or Conductance of Insulating Materials
ASTM D7952-15(2021) Standard Test Method for Measuring Aspiration Potential of Aerosol Products
ASTM D4308-95(2005) Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
ASTM D4308-95(2000)e1 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
ASTM D5464-93(2001) Standard Test Methods for pH Measurement of Water of Low Conductivity
ASTM D5128-14(2022) Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
ASTM D4308-95(2010) Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
ASTM D4308-10 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
ASTM D5464-16 Standard Test Method for pH Measurement of Water of Low Conductivity
ASTM D5128-14 Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
ASTM D4519-10 Standard Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by Cation Exchange and Degassed Cation Conductivity
ASTM B986-13 Standard Test Method for Determination of Tensile Strength by Mass Method for Stranded Conductors Intended for use in Electronic Application
ASTM B986-13e1 Standard Test Method for Determination of Tensile Strength by Mass Method for Stranded Conductors Intended for use in Electronic Application
ASTM B63-07(2018) Standard Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials
ASTM C1702-09 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM C1702-15 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM C1702-15b Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM D5391-99 Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample
ASTM D5391-99(2005) Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample
ASTM D4827-03(2022) Standard Test Method for Determining the Unreacted Monomer Content of Latexes Using Capillary Column Gas Chromatography
ASTM D6391-11(2020) Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration
ASTM C1702-13a Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM F326-96(2001)e1 Standard Test Method for Electronic Measurement for Hydrogen Embrittlement from Cadmium-Electroplating Processes
ASTM F326-96(2001)e2 Standard Test Method for Electronic Measurement for Hydrogen Embrittlement from Cadmium-Electroplating Processes
ASTM D4308-12 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
ASTM D4308-13 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
ASTM D4827-03 Standard Test Method for Determining the Unreacted Monomer Content of Latexes Using Capillary Column Gas Chromatography
ASTM C910-93a(1997) Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants
ASTM C910-03 Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants
ASTM C910-06 Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants
ASTM C910-16(2021) Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants
ASTM C910-16 Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants
ASTM C1702-09a Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM C1702-17 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM C1702-13 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM C1702-14 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry

German Institute for Standardization, Single subject conductive adhesive test method

DIN EN ISO 13078:2013-05 Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple (ISO 13078:2013); German version EN ISO 13078:2013
DIN EN ISO 13078-3:2023-08 Dentistry - Dental furnace - Part 3: Test method for the evaluation of high temperature sintering furnace measurement with a separate thermocouple (ISO 13078-3:2023); German version EN ISO 13078-3:2023
DIN EN ISO 13078:2013 Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple (ISO 13078:2013); German version EN ISO 13078:2013
DIN EN ISO 13078:2011 Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple (ISO/DIS 13078:2011); German version prEN ISO 13078:2011
DIN EN ISO 284:2013-04 Conveyor belts - Electrical conductivity - Specification and test method (ISO 284:2012); German version EN ISO 284:2012
DIN EN 60749-44:2017-04 Semiconductor devices - Mechanical and climatic test methods - Part 44: Neutron beam irradiated single event effect (SEE) test method for semiconductor devices (IEC 60749-44:2016); German version EN 60749-44:2016
DIN 50455-2:1999-11 Testing of materials for semiconductor technology - Methods for the characterisation photoresists - Part 2: Determination of photosensitivity of positive photoresists
DIN 50455-1:2009-10 Testing of materials for semiconductor technology - Methods for characterizing photoresists - Part 1: Determination of coating thickness with optical methods
DIN 51412-2:2013-01 Testing of petroleum products - Determination of the electrical conductivity - Part 2: Field method
DIN EN ISO 24584:2022-10 Textiles - Smart textiles - Test method for sheet resistance of conductive textiles using non-contact type (ISO 24584:2022); German version EN ISO 24584:2022
DIN EN 60749-27:2013-04 Semiconductor devices - Mechanical and climatic test methods - Part 27: Electrostatic discharge (ESD) sensitivity testing - Machine model (MM) (IEC 60749-27:2006 + A1:2012); German version EN 60749-27:2006 + A1:2012 / Note: DIN EN 60749-27 (2007-01) re...
DIN 51412-1:2005-06 Testing of petroleum products - Determination of the electrical conductivity - Part 1: Laboratory method
DIN 13905-1:2004 Dentistry - Dental furnace - Part 1: Dynamic test method for temperature measurement with separate thermocouple
DIN EN 61620:1999 Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method (IEC 61620:1998); German version EN 61620:1999

Association Francaise de Normalisation, Single subject conductive adhesive test method

NF S91-277*NF EN ISO 13078:2013 Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple
NF EN 13868:2003 Cathéters - Méthodes d'essai de résistance à la plicature pour cathéters à simple voie et tubes à usage médical
NF EN ISO 284:2013 Courroies transporteuses - Conductibilité électrique - Spécification et méthode d'essai
NF EN 60749-44:2016 Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 44 : méthode d'essai des effets d'un événement isolé (SEE) irradié par un faisceau de neutrons pour des dispositifs à semiconducteurs
NF C96-022-44*NF EN 60749-44:2016 Semiconductor devices - Mechanical and climatic test methods - Part 44 : neutron beam irradiated single event effect (SEE) test method for semiconductor devices
NF ISO 16525-1:2014 Adhésifs - Méthodes d'essai pour adhésifs à conductivité électrique isotrope - Partie 1 : méthodes d'essai générales
NF EN 62567:2014 Lignes électriques aériennes - Méthodes d'essai des caractéristiques d'auto-amortissement des conducteurs
NF EN ISO 13078:2013 Médecine bucco-dentaire - Four dentaire - Méthode d'essai pour le mesurage de la température au moyen d'un thermocouple
NF EN 61620:1999 Isolants liquides - Détermination du facteur de dissipation diélectrique par la mesure de la conductance et de la capacité - Méthode d'essai.
NF C28-913/IN1:2007 Magnetic materials - Methods of measurement of the magnetic properties of electrical sheet and strip by means of a single sheet tester.
NF C28-913:2007 Magnetic materials - Methods of measurement of the magnetic properties of electrical sheet and strip by means of a single sheet tester.
NF EN 61338-1-5:2015 Résonateurs diélectriques à modes guidés - Partie 1-5 : informations générales et conditions d'essais - Méthode de mesure de la conductivité au niveau de l'interface entre une couche conductrice et un substrat diélectrique fonctionnant aux h...
NF EN 61189-5-503:2017 Méthodes d'essai pour les matériaux électriques, les cartes imprimées et autres structures d'interconnexion et ensembles - Partie 5-503 : méthodes d'essai générales pour les matériaux et les assemblages - Essais des filaments anodiques condu...

British Standards Institution (BSI), Single subject conductive adhesive test method

BS EN ISO 13078:2013 Dentistry. Dental furnace. Test method for temperature measurement with separate thermocouple
BS ISO 16525-7:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Environmental test methods
BS ISO 16525-1:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. General test methods
BS ISO 16525-8:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Electrochemical-migration test methods
BS EN ISO 13078-3:2023 Dentistry. Dental furnace - Test method for the evaluation of high temperature sintering furnace measurement with a separate thermocouple
BS ISO 16525-3:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Determination of heat-transfer properties
BS ISO 16525-2:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Determination of electrical characteristics for use in electronic assemblies
BS ISO 16525-5:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Determination of shear fatigue
BS ISO 16525-6:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Determination of pendulum-type shear impact
BS ISO 16525-9:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Determination of high-speed signal-transmission characteristics
22/30425562 DC BS EN ISO 13078-3. Dentistry. Dental furnace. Part 3. Test method for evaluation of high temperature sintering furnace measurement with separate thermocouple
BS IEC 62951-9:2022 Semiconductor devices. Flexible and stretchable semiconductor devices - Performance testing methods of one transistor and one resistor (1T1R) resistive memory cells
BS IEC 62951-6:2019 Semiconductor devices. Flexible and stretchable semiconductor devices - Test method for sheet resistance of flexible conducting films
BS EN 3475-801:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Capacitance per unit length
BS ISO 16525-4:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Determination of shear strength and electrical resistance using rigid-to-rigid bonded assemblies
BS DD IEC/PAS 61338-1-5:2010 Waveguide type dielectric resonators - General information and test conditions - Measurement method of conductivity at interface between conductor layer and dielectric substrate at microwave frequency
BS EN 61338-1-5:2015 Waveguide type dielectric resonators. General information and test conditions. Measurement method of conductivity at interface between conductor layer and dielectric substrate at microwave frequency
PD IEC/TS 62282-7-1:2017 Fuel cell technologies. Test methods. Single cell performance tests for polymer electrolyte fuel cells (PEFC)
BS EN 61620:1999 Insulating liquids. Determination of the dielectric dissipation factor by measurement of the conductance and capacitance. Test method
20/30423207 DC BS EN IEC 62951-9. Semiconductor devices. Flexible and stretchable semiconductor devices. Part 9. Performance testing methods of one transistor and one resistor (1T1R) resistive memory cells
BS ISO 23331:2021 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for total electrical conductivity of conductive fine ceramics
BS ISO 6722-1:2011 Road vehicles. 60 V and 600 V single-core cables. Dimensions, test methods and requirements for copper conductor cables
BS EN ISO 24584:2022 Textiles. Smart textiles. Test method for sheet resistance of conductive textiles using non-contact type
BS EN 60811-410:2012+A1:2017 Electric and optical fibre cables. Test methods for non-metallic materials - Miscellaneous tests. Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors
BS EN IEC 61189-5-503:2017 Test methods for electrical materials, printed board and other interconnection structures and assemblies - General test method for materials and assemblies. Conductive anodic filaments (CAF) testing of circuit boards
BS EN IEC 62933-2-1:2018 Electrical energy storage (EES) systems - Unit parameters and testing methods. General specification
PD CISPR/TR 30-1:2012 Test method on electromagnetic emissions. Electronic control gear for single- and double-capped fluorescent lamps
BS EN 61000-4-20:2010 Electromagnetic compatibility (EMC). Testing and measurement techniques. Emission and immunity testing in transverse electromagnetic (TEM) waveguides
BS EN 61000-4-20:2011 Electromagnetic compatibility (EMC). Testing and measurement techniques. Emission and immunity testing in transverse electromagnetic (TEM) waveguides
BS EN IEC 62282-7-2:2021 Tracked Changes. Fuel cell technologies. Test methods. Single cell and stack performance tests for solid oxide fuel cells
BS PD IEC/TS 62804-1:2015 Photovoltaic (PV) modules. Test methods for the detection of potential-induced degradation. Crystalline silicon
PD IEC TR 60747-5-12:2021 Semiconductor devices. Optoelectronic devices. Light emitting diodes. Test method of LED efficiencies

International Organization for Standardization (ISO), Single subject conductive adhesive test method

ISO 13078:2013 Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple
ISO 13078-3:2023 Dentistry — Dental furnace — Part 3: Test method for the evaluation of high temperature sintering furnace measurement with a separate thermocouple
ISO/PRF 13078-3 Dentistry — Dental furnace — Part 3: Test method for the evaluation of high temperature sintering furnace measurement with a separate thermocouple

Korean Agency for Technology and Standards (KATS), Single subject conductive adhesive test method

KS M 6773-2014(2019) Testing method for volume resistivity of electrically conductive rubber and plastic materials
KS M 6773-2009 Testing method for volume resistivity of electrically conductive rubber and plastic materials
KS P ISO 7494-1:2018 Dentistry — Dental units — Part 1: General requirements and test methods
KS C 3004-2002 Testing methods for rubber or plastic insulated wires and cables
KS I 3201-2007(2017) Testing methods for electric conductivity in highly purified water
KS P ISO 13078:2019 Dentistry — Dental furnace — Test method for temperature measurement with separate thermocouple
KS C 2314-2002 TESTING METHOD OF VARNISHED CLOTHS AND TAPES FOR ELECTRICAL INSULATION
KS C 2314-1982 TESTING METHOD OF VARNISHED CLOTHS AND TAPES FOR ELECTRICAL INSULATION
KS M 6773-2014 Testing method for volume resistivity of electrically conductive rubber and plastic materials
KS L 3306-2007(2012) Testing method for thermal conductivity of firebricks by hot wire
KS L 3306-1980 Testing method for thermal conductivity of firebricks by hot wire
KS D 0257-2002 Measuring of minority - carrier lifetime in silicon single crystal by photoconductive decay method
KS C 0243-2016 Environmental testing Part 2：Tests－Test Ec： Drop and topple, primarily for equipment－type specimens
KS D 0260-1999 TESTING METHODS OF RESISTIVITY FOR SINGLE CRYSTAL SILICON WAFERS WITH FOUR-POINT PROBE
KS F 2279-2003 METHOD OF TEST FOR ELECTRIC NSULATION OF EQUIPMENT UNIT FOR DWELLINGS
KS C IEC 61788-21:2020 Superconductivity — Part 21: Superconducting wires — Test methods for practical superconducting wires — General characteristics and guidance
KS C 2603-1980(2020) Testing Method for Conductor-Resistance and Resistivity of Metallic Resistance materials
KS L 1619-2013(2018) Testing methods for resistivity of conductive fine ceramic thin films with four point probe array
KS L 1620-2013(2018) Test methods for measuring resistivity of electrically conductive ceramic thin films with Van der Pauw method
KS R ISO 6722-1-2015(2020) Road vehicles — 60 V and 600 V single-core cables — Part 1: Dimensions, test methods and requirements for copper conductor cables
KS C 6111-2004 TEST METHODS OF D.C. CRITICAL CURRENT OF Cu/Nb-Ti COMPOSITE SUPERCONDUCTORS
KS C 0267-1995(2000) ELECTROMAGNETIC COMPATIBILITY-TESTING AND MEASUREMENT TECHNIQNES -IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO FREQUENCY FIELDS
KS C IEC 60454-2:2019 Pressure-sensitive adhesive tapes for electrical purposes —Part 2: Methods of test
KS F 2711-2002 Testing method for electrical indication of concrete’s ability to resist chloride ion penetration
KS D 0260-1989(1994) TESTING METHODS OF RESISTIVITY FOR SINGLE CRYSTAL SILICON WAFERS WITH FOUR-POINT PROBE
KS F 2711-2017 Standard test method for resistance of concrete to chloride ion penetration by electrical conductance
KS F 2711-2017(2022) Standard test method for resistance of concrete to chloride ion penetration by electrical conductance

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Single subject conductive adhesive test method

JEDEC JESD51-1-1995 Integrated Circuit Thermal Measurement Method - Electrical Test Method (Single Semiconductor Device)
JEDEC JESD51-14-2010 Transient Dual Interface Test Method for the Measurement of the Thermal Resistance Junction to Case of Semiconductor Devices with Heat Flow Trough a Single Path

RU-GOST R, Single subject conductive adhesive test method

GOST 25183.7-1982 Photographic gelatine. Method of determination of specific electroconductivity
GOST 7229-1976 Cables, wires and cords. Method of measurement of electrical resistance of conductors
GOST 24461-1980 Power semiconductor devices. Test and measurement methods
GOST R 52865-2009 Global navigation satellite system. Parameters radionavigation field. Technical requirements and test methods
GOST R 52865-2007 Global navigation satellite system. Parameters radionavigation field. Technical requirements and test methods

KR-KS, Single subject conductive adhesive test method

KS P ISO 7494-1-2018 Dentistry — Dental units — Part 1: General requirements and test methods
KS I 3201-2023 Testing methods for electric conductivity in highly purified water
KS P ISO 13078-2019 Dentistry — Dental furnace — Test method for temperature measurement with separate thermocouple
KS C IEC 61788-21-2020 Superconductivity — Part 21: Superconducting wires — Test methods for practical superconducting wires — General characteristics and guidance
KS P ISO 13116-2022 Dentistry — Test method for determining radio-opacity of materials
KS C IEC 60454-2-2019 Pressure-sensitive adhesive tapes for electrical purposes —Part 2: Methods of test
KS M ISO 6297-2003(2023)

Professional Standard - Machinery, Single subject conductive adhesive test method

JB/T 6307.2-1992 Test method for power semiconductor module Single-phase bridge rectifier diodes
JB/T 6307.5-1994 Power Semiconductor Module Test Methods Bipolar Transistors Single-Phase Bridge and Three-Phase Bridge
JB/T 6307.1-1992 Test method for power semiconductor module Rectifier diode pair of arms
JB/T 6307.3-1992 Test method for power semiconductor module Triphase bridge rectifier diode
JB/T 4219-1999 Type designation of measuring equipments for power semiconductor devices
JB/T 6307.4-1992 Test method for power semiconductor module Arm and pair of arms of bipolar transistor

European Committee for Standardization (CEN), Single subject conductive adhesive test method

EN ISO 13078:2013 Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple
EN 3475-801:2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 801: Capacitance per unit length

NZ-SNZ, Single subject conductive adhesive test method

AS/NZS 1660.5.6:2005 Test Methods for Electric Cables, Cords and Conductors Method 5.6: Fire Tests - Test for vertical flame propagation for a single insulated wire or cable
AS/NZS 1660.1:1998 Test Methods for Electric Cables, Cords and Conductors Method 1: Conductors and Metallic Components
AS/NZS 1660.5.5:2005 Test Methods for Electric Cables, Cords and Conductors Method 5.5: Fire Tests - Circuit integrity
AS/NZS 1660.5.4:1998 Test Methods for Electric Cables, Cords and Conductors Method 5.4: Fire Tests - Determination of Degree of Acidity of Gases Evolved During the Combustion of Materials Taken from Electric Cables by Measuring pH and Conductivity
AS/NZS 1660.5.2:2006 Test methods for electric cables, cords and conductors Method 5.2: Fire testsMeasurement of smoke density of cables burning under defined conditions
AS/NZS 1660.5.3:1998 Test Methods for Electric Cables, Cords and Conductors Method 5.3: Fire Tests - Determination of the Amount of Halogen Acid Gas Evolved During the Combustion of Polymeric Materials Taken from Cables

American National Standards Institute （ANSI), Single subject conductive adhesive test method

ANSI/ADA 163-2018 Dental Furnace – Part 1: Test Method for Temperature Measurement with Separate Thermocouple
ANSI/ASTM D4325:2013 Test Methods for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
ANSI/ASA S2.32-1982 Methods for the Experimental Determination of Mechanical Mobility, Part 2: Measurements Using Single-Point Translational Excitation
ANSI/ASTM B63:2001 Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials
ANSI/ASTM D4308:2013 Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
ANSI/ASTM D257:2014 Standard Test Methods for DC Resistance or Conductance of Insulating Materials
ANSI/ASTM D4308:2021 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
ANSI/ASTM D2624:2021 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels

BR-ABNT, Single subject conductive adhesive test method

ABNT MB-125-1958
ABNT NBR 9150-2013 Wire and cables for telecommunication — Separation of insulated conductors — Test method

PL-PKN, Single subject conductive adhesive test method

PN E04160 ArkusZ54-1973 Electric cables Me?hods of ?esting Te?t for resistant againt? gluing ol con- duc?ors
PN C05014-1988 Test methods for adhesion of rubber to single-strand wire
PN E04160-68-1988 Electric cables Methods of test Electrical test of conducting polymeric screen
PN E04160-46-1987 Electric cables Methods of testing Test of resistance to Iow temperature of rubber of thermoplastic insulation of sheath
PN C82055-11-1989 Test methods of pressed carbon products Determination of thermal specific conductivity with comparative method
PN E04160 ArkusZ84-1973 Bectric cables Methods ot testing Measuring ot the transfer admi??ance due to electric coupling

YU-JUS, Single subject conductive adhesive test method

JUS N.A8.291-1980 Pressure sensitive adhesive tapesfor electrical purposes. Methods of test.
JUS G.E0.054-1991 Rubber and plastic. Antistatic endless V-belts. Electrical conductivity and method of test
JUS Z.B1.303-2001 Safety dielectric rubber footwear - Requirements and test methods
JUS G.E0.055-1991 Rubers and plastic. Electrical conductivity of antistatic endless synchronous belts. Characteristics and test method

Chongqing Provincial Standard of the People's Republic of China, Single subject conductive adhesive test method

DB50/T 1417-2023 Car navigation unit performance requirements and test methods

CZ-CSN, Single subject conductive adhesive test method

CSN 35 8548-1969 Methods of testing admittance of electron ic tubes
CSN 35 8537-1968 Methods of testing mutual conductance of eleotronio tubes
CSN 56 0161-4-1996 Methods for testing of liquid sugars. Determination of ash by conductometric method.
CSN 35 8538-1968 Methods of testing conversion transconductance of eleetronic tubes
CSN 34 7470-2 ZA11-1998
CSN 34 7470-2 ZA10-1998
CSN 85 6007-1984 Dental pieces fot electrical drilling machine. Universal technical. require- ments and methods of testing
CSN 35 1601-1980 Power semiconductor devices. General technical requirements. Testing methods
CSN 35 6110-1988 Single — and three — phase watt hour meters. Technical requirements and testing methods
CSN 34 6319-1987 Testing of ceramic electrotechnic materials. Methods of the determination of medium specific heat, thermal conductivity and medium temperature conductivity
CSN 34 7470-2-1999 Rubber insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods
CSN 34 7470-2-1995 Rubber insulated cables of rated voltages up to and including 450/750 V. Part 2: Test methods

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Single subject conductive adhesive test method

GB/T 12631-1990 Test method for resistance of conductor of printed boards
GB/T 43226-2023 Single-event soft error time domain testing method for semiconductor integrated circuits used in aerospace applications
GB/T 12966-1991 The method for electrical conductivity measurement of aluminium alloys by use of eddy current
GB/T 12966-2008 The method for determining aluminum alloys conductivity using eddy current
GB/T 3789.6-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of transconductance and amplification factor
GB/T 1550-1997 Standard methods for measuring conductivity type of extrinsic semiconducting materials
GB/T 5201-1994 Test procedures for semiconductor charged particle detectors
GB/T 32206-2015 Standard practice for testing electrolytic conductivity detectors used in gas chrometography
GB/T 15662-1995 Method of testing volume resistivity of conducting and antistatic plastics
GB/T 4825.1-1984 Test method for partial discharge of conductors on printed boards
GB/T 42838-2023 Semiconductor Integrated Circuit Hall Circuit Test Method
GB/T 4377-2018 Semiconductor integrated circuits.Measuring method of voltage regulators
GB/T 32791-2016 Electromagnetic (eddy-current) examination method for electrical conductivity of copper and copper alloys
GB/T 42975-2023 Semiconductor integrated circuit driver test methods
GB/T 28817-2012 Single cell test methods for polymer electrolyte fuel cell (PEFC)
GB/T 43061-2023 Semiconductor integrated circuit PWM controller testing method
GB 12201-1990 Test methods of VSWR of the waveguide feed-system for marine radar
GB/T 42970-2023 Semiconductor integrated circuit video encoding and decoding circuit testing methods
GB/T 36477-2018 Semiconductor integrated circuit.Measuring methods for flash memory
GB/T 43040-2023 Semiconductor integrated circuit AC/DC converter testing method
GB 35007-2018 Semiconductor integrated circuit low voltage differential signal circuit testing method
GB/T 15250-1994 Test method for bulk acoustic wave attenuation of piezoelectric lithium niobate crystals
GB/T 13789-2008 Methods of measurement of the magnetic properties of magnetic sheet and strip by means a single sheet tester
GB/T 13789-2022 Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester
GB/T 14030-1992 General principles of measuring methods of timer circuits for semiconductor integrated circuits
GB 14030-1992 Basic principles of semiconductor integrated circuit time-based circuit testing methods
GB/T 11297.7-1989 Test method for resistivity and Hall coefficient in InSb single crystals
GB 11297.7-1989 Test Method for InSb Single Crystal Resistivity and Hall Coefficient
GB/T 6798-1996 Semiconductor integrated circuits. General principles of measuring methods of voltage comparators
GB/T 4377-1996 Semiconductor integrated circuits. General principles of measuring methods of voltage regulator
GB/T 14029-1992 General principles of measuring methods of analogue multiplier for semiconductor integrated circuits
GB 14029-1992 Basic principles of semiconductor integrated circuit analog multiplier testing methods
GB/T 14862-1993 Junction-to-case thermal resistance test methods of packages for semiconductor integrated circuits
GB/T 15136-1994 General principles of measuring methods for quartz clock and watch circuits of semiconductor integrated circuits
GB/T 42271-2022 Test method for resistivity of semi-insulating monocrystalline silicon carbide by contactless measurement
GB/T 8446.2-1987 Measuring method of thermal resistance and input fluid-output fluid pressure difference of heat sink for power semiconductor device
GB/T 14028-1992 General principles of measuring methods of analogue switches for semiconductor integrated circuits
GB/T 42848-2023 Test method for direct digital frequency synthesizer of semiconductor integrated circuit
GB 14028-2018 Basic principles of semiconductor integrated circuit analog switch test methods
GB/T 6616-2009 Test methods for measuring resistivity of semiconductor wafers or sheet resistance of semiconductor films with a noncontact eddy-current gauge
GB 3442-1986 Basic principles of semiconductor integrated circuit operational (voltage) amplifier testing methods
GB/T 14031-1992 General principles of measuring methods of analogue phase-loop for semiconductor integrated circuits
GB/T 14032-1992 General principles of measuring methods of digital phase-locked loop for semiconductor integrated circuits
GB 14031-1992 Basic principles of semiconductor integrated circuit analog phase-locked loop testing methods
GB 14032-1992 Basic principles of digital phase-locked loop testing methods for semiconductor integrated circuits

Indonesia Standards, Single subject conductive adhesive test method

SNI 09-4406-1997 Test method of speedometers for motor cycles
SNI 09-4405-1997 Test method for driving perfomance of motor cycle

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Single subject conductive adhesive test method

GB/T 35494.1-2017 Test methods for isotropic electrically conductive adhesives—Part 1:General test methods
GB/T 12631-2017 Test method for resistance of conductors of printed boards
GB/T 35006-2018 Semiconductor integrated circuits—Measuring method of level converter
GB/T 14028-2018 Semiconductor integrated circuits—Measuring method of analogue switch
GB/T 35007-2018 Semiconductor integrated circuits—Measuring method of low voltage differential signaling circuitry

FI-SFS, Single subject conductive adhesive test method

Professional Standard - Electron, Single subject conductive adhesive test method

SJ 2355.4-1983 Methods of measurement for junction capacitance of light-emitting devices
SJ 2857.2-1988 Methods for measurement of thermoelectric refrigeration materials properties--Methods for measurements of conductivity
SJ 2355.3-1983 Method of measurement for reverse current of light-emitting devices
SJ/T 2215-2015 Measuring methods for semiconductor photocouplers
SJ 2857.1-1988 Methods for measurement of thermoelectric refrigeration materials properties--Methods for measurement of thermal conductivity
SJ 2658.4-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for capacitance
SJ 2658.3-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for backward voltage
SJ 1388-1978 Methods of measurement for anode conductance of noise-generator diodes
SJ/T 11499-2015 Test method for measuring electrical properties of monocrystalline silicon carbide
SJ 2658.5-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for forward series resistance
SJ/T 2429-1983 Test method for electrical characteristics of astronautic monocrystal silicon solar cells
SJ/T 11098-1996 Test method for standing wave coefficient of marine navigation radar waveguide feed system
SJ 20858-2002 Measuring methods for electrical parameters of silicon carbide single crystal material
SJ/T 2214-2015 Measuring methods for semiconductor photodiode and phototransistor
SJ/T 10482-1994 Test method for characterizing semiconductor deep levels by transient capacitance techniques
SJ 2214.3-1982 Method of measurement for dark current of semiconductor photodiodes
SJ 2214.5-1982 Method of measurement for junction capacitance of semiconductor photodiodes
SJ 2214.8-1982 Method of measurement for dark current voltage of semiconductor phototransistors
SJ/T 10735-1996 Semiconductor integrated circuits General principles of measuring methods for TTL circuits
SJ/T 10736-1996 Semiconductor integrated circuits - General principles of measuring methods for HTL circuits
SJ/T 10737-1996 Semiconductor integrated circuits - General principles of measuring methods for ECL circuits
SJ/T 10741-2000 Semiconductor integrated circuits General principles of measuring methods for CMOS circuits
SJ/T 10741-1996 Semiconductor integrated circuits--General principles of measuring methods for CMOS circuits
SJ/Z 9010.12-1987 Measurements of electrical properties of electronic tubes and valves--Part 12: Methods of measuring for electrode resistance, transcondductance, amplification factor, conversion resistance and conversion transconductance
SJ 2214.10-1982 Method of measurement for light current of semiconductor photodiodes and phototransistors
SJ 2215.6-1982 Method of measurement for junction capacitance of semiconductor photocouplers (diodes)
SJ/T 10804-2000 Semiconductor integrated circuits.General principles of measuring methods for level translator
SJ/T 10805-2000 Semiconductor integrated circuits.General principles of measuring methods for voltage comparators
SJ/T 10803-1996 Semiconductor integrated circuits used as interface circuits - General principles of measuring methods for line circuits
SJ 2215.3-1982 Method of measurement for forward current of semiconductor photocouplers (diodes)
SJ 2214.4-1982 Method of measurement for reverse break-down voltage of semiconductor photodiodes
SJ 2215.4-1982 Method of measurement for reverse current of semiconductor photocouplers (diodes)
SJ 2215.10-1982 Method of measurement for direct current transfer ratio of semiconductor photocouplers
SJ 2215.12-1982 Method of measurement for input-to-output capacitance of semiconductor photocouplers
SJ 2215.13-1982 Method of measurement for input-to-output isolation resistance of semiconductor photocouplers
SJ/T 11005-1996 Semiconductor TV integrated circuits - General principles of measuring methods for audio channel circuits
SJ/T 11006-1996 Semiconductor TV integrated circuits - General principles of measuring methods for horizontal and vertical sweep circuits
SJ/T 11004-1996 Semiconductor TV integrated circuits - General principles of measuring methods for picture channel circuits
SJ/T 10738-1996 Semiconductor integrated circuits - General principles of measuring methods for operational (voltage) amplifiers
SJ/T 10805-1996 Semiconductor integrated circuits used as interface circuits--General principles of measuring methods of voltage comparators
SJ/T 10804-1996 Semiconductor integrated circuits used as interface circuits--General principles of measuring methods for level translator
SJ/Z 9011.3-1987 Measurement of photosensitive components Part 3 Methods of measurement for photoconductive cells for visible spectra
SJ 2215.5-1982 Method of measurement for reverse breakdown voltage of semiconductor photocouplers (diodes)
SJ 2215.9-1982 Method of measurement for reverse cut-off current of semiconductor photocouplers transistors
SJ/T 10882-1996 Semiconductor integrated circuits - General principles of measuring methods for linear amplifiers

Shanghai Provincial Standard of the People's Republic of China, Single subject conductive adhesive test method

DB31/ 513-1992 Vulcanized rubber -- Antistatic and conductive rubber products for anesthesia machines -- Method for determination of electrical resistance

RO-ASRO, Single subject conductive adhesive test method

STAS SR 11388-2000 Common test methods for electric cables and conductors
STAS 11388/10-1985 WIKES AND CABLES METHODS OF TEST Specific tests for covers of clastomeric compounds
STAS 6693/2-1975 Semiconductor devices TRANSISTORS Methods for measuring electrical properties

ES-UNE, Single subject conductive adhesive test method

UNE-EN ISO 13078-3:2023 Dentistry - Dental furnace - Part 3: Test method for the evaluation of high temperature sintering furnace measurement with a separate thermocouple (ISO 13078-3:2023) (Endorsed by Asociación Española de Normalización in July of 2023.)
UNE-EN ISO 284:2012 Conveyor belts - Electrical conductivity - Specification and test method (ISO 284:2012) (Endorsed by AENOR in February of 2013.)
UNE-EN 60749-44:2016 Semiconductor devices - Mechanical and climatic test methods - Part 44: Neutron beam irradiated single event effect (SEE) test method for semiconductor devices (Endorsed by AENOR in December of 2016.)
UNE-EN 300386 V1.5.1:2016 Semiconductor devices - Mechanical and climatic test methods - Part 44: Neutron beam irradiated single event effect (SEE) test method for semiconductor devices (Endorsed by AENOR in December of 2016.)
UNE-EN 60454-2:2007 Pressure-sensitive adhesive tapes for electrical purposes -- Part 2: Methods of test (IEC 60454-2:2007). (Endorsed by AENOR in February of 2008.)
UNE-EN 4158:2006 Aerospace series - Paints and varnishes - Test method for measurement of electrical surface resistance of conductive layers (Endorsed by AENOR in March of 2007.)
UNE-EN 62047-22:2014 Semiconductor devices - Micro-electromechanical devices - Part 22: Electromechanical tensile test method for conductive thin films on flexible substrates (Endorsed by AENOR in November of 2014.)

Group Standards of the People's Republic of China, Single subject conductive adhesive test method

T/IAWBS 011-2019 Test methods for measuring resistivity of conductive silicon carbide wafers with a noncontact eddy-current gauge
T/COS 003-2019 Test method for positioning precision of GNSS receiverPart 1: single point positioning testing
T/ZGIA 001-2019 Graphene test method for the determination of powder conductivity four-probe method
T/CI 038-2021 The test method of mean specific heat capacity for lithium ion battery cell
T/CES 067-2021 Magnetic circuit test method for magnetization critical current uniformity of high temperature superconducting tapes
T/CEEIA 578-2022 Ion conductive membrane for iron chromium flow battery technical requirements and test methods

VE-FONDONORMA, Single subject conductive adhesive test method

IN-BIS, Single subject conductive adhesive test method

IS 3400 Pt.15-1971

Professional Standard - Aviation, Single subject conductive adhesive test method

HB 5356-1986 Eddy current test method for electrical conductivity of aluminum alloy

国家市场监督管理总局、中国国家标准化管理委员会, Single subject conductive adhesive test method

GB/T 1550-2018 Test methods for conductivity type of extrinsic semiconducting materials
GB/T 12966-2022 The methods for determining aluminium and aluminium alloys conductivity using eddy current
GB/T 28817-2022 Single cell test methods for polymer electrolyte fuel cell (PEFC)
GB/T 39346-2020 Space hall electric propulsion power processing unit test method
GB/T 38336-2019 Industrial, scientific and medical robots—Electromagnetic compatibility—Emission methods of measurement and limits

CU-NC, Single subject conductive adhesive test method

NC 26-176-1987 Veterinary Drugs. Simple Calcium Electrolitic Solution. Testing Methods
NC 90-13-36-1986 Metrological Assurance Conductometers. Testing Methods

Danish Standards Foundation, Single subject conductive adhesive test method

DS/EN ISO 13078:2013 Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple
DS/EN ISO 284:2013 Conveyor belts - Electrical conductivity - Specification and test method

AENOR, Single subject conductive adhesive test method

UNE-EN ISO 13078:2013 Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple (ISO 13078:2013)
UNE 22315:1985 VENTILATION DUCTS. ELECTRIC CONDUCTIVITY. TESTING METHOD. SPECIFICATIONS.
UNE 18155:1981 ANTISTATIC ENDLESS V-BELTS - ELECTRICAL CONDUCTIVITY - CHARACTERISTICS AND METHOD OF TEST.
UNE-EN ISO 20127:2005 Dentistry - Powered toothbrushes - General requirements and test methods (ISO 20127:2005)
UNE 22070:1992 COMPRESSED AIR HOSES. ELECTRIC CONDUCTIVITY. TESTING METHOD AND SPECIFICATIONS.
UNE-EN 61620:1999 INSULATING LIQUIDS. DETERMINATION OF THE DIELECTRIC DISSIPATION FACTORBY MEASUREMENT FO THE CONDUCTANCE AND CAPACITANCE. TEST METHOD
UNE 208001-30:2002 Test method on electromagnetic emissions from electronic ballasts for single- and double-capped fluorescent lamps.
UNE 22071:1992 HOSES FOR PNEUMATIC BLASTING LOADING. ELECTRIC CONDUCTIVITY. TESTING METHOD AND SPECIFICATIONS.

工业和信息化部, Single subject conductive adhesive test method

SJ/T 11792-2022 Test method for conductivity of lithium-ion battery electrode materials
SJ/T 10805-2018 Semiconductor integrated circuit voltage comparator test method
SJ/T 11702-2018 Semiconductor integrated circuit serial peripheral interface test method
SJ/T 11706-2018 Semiconductor integrated circuit field programmable gate array testing method

未注明发布机构, Single subject conductive adhesive test method

DIN EN ISO 284:2004 Conveyor Belts – Electrical Conductivity – Specification and Test Methods
BS EN 50265-2-2:1999 Common test methods for cables under fire conditions - Test for resistance to vertical flame propagation for a single insulated conductor or cable - Part 2-2 : Procedures - Diffusion flame

国家能源局, Single subject conductive adhesive test method

NB/T 42081-2016 All-vanadium redox flow battery single cell performance test method
NB/T 10820-2021 Solid oxide fuel cell single cell test method
NB/T 42080-2016 Test method for ion conductive membranes for all-vanadium redox flow batteries

Defense Logistics Agency, Single subject conductive adhesive test method

DLA MIL STD 750 3-2012 TEST METHOD STANDARD TRANSISTOR ELECTRICAL TEST METHODS FOR SEMICONDUCTOR DEVICES PART 3: TEST METHODS 3000 THROUGH 3999
DLA MIL STD 750 4 E-2012 TEST METHOD STANDARD DIODE ELECTRICAL TEST METHODS FOR SEMICONDUCTOR DEVICES PART 4: TEST METHODS 4000 THROUGH 4999

Professional Standard - Energy, Single subject conductive adhesive test method

Military Standard of the People's Republic of China-General Armament Department, Single subject conductive adhesive test method

GJB 6919-2009 Test and evaluation methods of conductorial-fibre performance
GJB 1047.2-1990 Test Methods for Black Powder - Determination of Potassium Nitrate Conductivity Method
GJB 6771-2009(XG1-2015) Modification sheet for digital guidance calculation methods for missile and spacecraft flight test measurement and control equipment 1-2015
GJB 9147-2017 Semiconductor integrated circuit operational amplifier test methods
GJB 8696.7-2015 Terminal guided projectile test method Part 7: Circuit resistance detection
GJB 1047.2A-2004 Test Methods for Black Powder Part 2: Determination of Conductivity Method for Potassium Nitrate
GJB 8701.7-2015 Anti-tank missile test methods Part 7: Circuit resistance (electrical parameters) detection
GJB 8685.12-2015 Gun-launched missile test methods Part 12: Static electrical parameter detection
GJB 2677-1996 Radar power distribution subsystem performance test method DC power supply, single-phase AC power supply
GJB 1047.2A-2020 Test methods for black powder Part 2: Determination of potassium nitrate content Conductometric method
GJB 8696.8-2015 Terminal guided projectile test method Part 8: Maximum current consumption detection

GOSTR, Single subject conductive adhesive test method

GOST 33461-2015 Aviation and distillate fuels. Test methods for electrical conductivity

Anhui Provincial Standard of the People's Republic of China, Single subject conductive adhesive test method

DB34/T 3571-2019 Electrical test method for insulating layer of large superconducting magnet
DB34/T 3240-2018 Testing method of voltage distribution in superconducting cyclotron resonator cavity
DB34/T 3770-2020 Test method for electrical testing of composite insulators for use in superconducting magnet systems
DB34/T 3377-2019 Test method for thermal runaway of power lithium-ion battery cells for electric vehicles

International Electrotechnical Commission (IEC), Single subject conductive adhesive test method

IEC 60749-44:2016 Semiconductor devices - Mechanical and climatic test methods - Part 44: Neutron beam irradiated single event effect (SEE) test method for semiconductor devices
IEC 62951-9:2022 Semiconductor devices - Flexible and stretchable semiconductor devices - Part 9: Performance testing methods of one transistor and one resistor (1T1R) resistive memory cells
IEC 61620:1998 Insulating liquids - Determination of dielectric dissipation factor by measurement of the conductance and capacitance - Test method
IEC TS 62282-7-1:2017 Fuel cell technologies - Part 7-1: Test methods - Single cell performance tests for polymer electrolyte fuel cells (PEFC)
IEC 63373:2022 Dynamic on-resistance test method guidelines for GaN HEMT based power conversion devices

AT-ON, Single subject conductive adhesive test method

ONORM DIN 19261-1981
ONORM EN 20284-1993 Conveyor belts — Electrical conductivity — Specification and method of test (ISO 284:1982)

Electronic Components, Assemblies and Materials Association, Single subject conductive adhesive test method

ECA 186-E-1978 Passive Electronic Component Parts, Test Methods for; General Instructions and Index of Tests

European Committee for Electrotechnical Standardization（CENELEC）, Single subject conductive adhesive test method

EN 60749-44:2016 Semiconductor devices - Mechanical and climatic test methods - Part 44: Neutron beam irradiated single event effect (SEE) test method for semiconductor devices

工业和信息化部/国家能源局, Single subject conductive adhesive test method

JB/T 13537-2018 Test method for volume resistivity of conductive powder for electromagnetic shielding
JB/T 13536-2018 Test method for magnetic permeability of electromagnetic shielding and absorbing materials

ZA-SANS, Single subject conductive adhesive test method

SANS 6282-1:2007 Test methods for bare conductors and conductors of insulated electric cables Part 1: Conductor resistance
SANS 6282-3:2007 Test methods for bare conductors and conductors of insulated electric cables Part 3: Mechanical tests
SANS 6281-1:2007 Test methods for impregnated paper-insulated electric cables Part 1: Tests on insulating and semi-conducting paper

TR-TSE, Single subject conductive adhesive test method

TS 2683-1977 Methods Of Test For General Purpose Electrical Cables With Copper Conductors For lircraft
TS 2586-1977 METHODS OF TEST FOR HEAT - RESISTING (190°C) ELEKCTRICAL CABLES WITH COPPER CONDUCTORS FOR AIRCRAFT
TS 2452-1976 MEASUBEMENTS OF THE ELECTRICAL PROPERTIES OF EIJECTRONIC TUBES AND VALVES PART 12 : METHODS OF MEASURING ELECTRODE RESISTANCE, TRANSCONDUCTANE, AMPLIFICATION FACTOR, CONVERSION RESISTANCE AND CONVERSION TRANSCONDUCTANCE

Institute of Electrical and Electronics Engineers (IEEE), Single subject conductive adhesive test method

IEEE 2828-2021 Guide for Measuring Method of Overhead Power Transmission Line Galloping Based on Monocular Video
IEEE 190-1960 IEEE Standard Methods of Testing Monochrome Television Broadcast Receivers
IEEE Std 190-1960 IEEE Standard Methods of Testing Monochrome Television Broadcast Receivers

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Single subject conductive adhesive test method

GJB 5389.10-2005 Test method of gun-launched missile Part 10:Circuit resistance inspection
GJB 5491.7-2005 Test method of terminally guided projectile Part 7:Circuit resistance detection test and measurement
GJB 5895.7-2006 Test method for anti-tank missile Part 7: Circuit resistance (electric parameters) inspection
GJB 5389.12-2005 Test method of gun-launched missile Part 12:Electrostatic parameters inspection
GJB 5491.8-2005 Test method of terminally guided projectile Part 8:Maximum consuming current inspection test and measurement

Lithuanian Standards Office , Single subject conductive adhesive test method

LST EN ISO 20127:2005 Dentistry - Powered toothbrushes - General requirements and test methods (ISO 20127:2005)
LST EN ISO 284:2013 Conveyor belts - Electrical conductivity - Specification and test method (ISO 284:2012)
LST EN 60454-2-2008 Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test (IEC 60454-2:2007)

AASHTO - American Association of State Highway and Transportation Officials, Single subject conductive adhesive test method

TP 119-2015 Standard Method of Test for Electrical Resistivity of a Concrete Cylinder Tested in a Uniaxial Resistance Test

The American Road & Transportation Builders Association, Single subject conductive adhesive test method

AASHTO TP 119-2015 Standard Method of Test for Electrical Resistivity of a Concrete Cylinder Tested in a Uniaxial Resistance Test
AASHTO TP 119-2021 Standard Method of Test for Electrical Resistivity of a Concrete Cylinder Tested in a Uniaxial Resistance Test

Professional Standard - Non-ferrous Metal, Single subject conductive adhesive test method

YS/T 557-2006 Test method for acoustic wave attenuation of piezoelectric lithium niobate single crystal

PT-IPQ, Single subject conductive adhesive test method

NP 2849-1985

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Single subject conductive adhesive test method

IPC 9691-2005 User Guide for the IPC-TM-650, Method 2.6.25, Conductive Anodic Filament (CAF) Resistance Test (Electrochemical Migration Testing)
IPC 9691A-2007 User Guide for the IPC-TM-650, Method 2.6.25, Conductive Anodic Filament (CAF) Resistance Test (Electrochemical Migration Testing)

IPC - Association Connecting Electronics Industries, Single subject conductive adhesive test method

IPC 9691A CHINESE-2007 User Guide for the IPC-TM-650@ Method 2.6.25@ Conductive Anodic Filament (CAF) Resistance Test (Electrochemical Migration Testing)
IPC 9691A CD-2007 User Guide for the IPC-TM-650@ Method 2.6.25@ Conductive Anodic Filament (CAF) Resistance Test (Electrochemical Migration Testing)
IPC 9691A CHINESE CD-2007 User Guide for the IPC-TM-650@ Method 2.6.25@ Conductive Anodic Filament (CAF) Resistance Test (Electrochemical Migration Testing)

Japanese Industrial Standards Committee (JISC), Single subject conductive adhesive test method

JIS K 7194:1994 Testing method for resistivity of conductive plastics with a four-point probe array
JIS K 6330-5:1998 Testing methods for rubber and plastics hoses -- Part 5: Determination of electrical resistance
JIS K 6404-2-2:1999 Testing methods for rubber-or plastics-coated fabrics -- Determination of roll characteristics -- Part 2: Methods for determination of the total mass per unit area, coating mass per unit area, and mass per unit area of the substrate
JIS C 2556:2015 Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester

Professional Standard - Ferrous Metallurgy, Single subject conductive adhesive test method

YB/T 4148-2006 Methods of measurement of the magnetic properties of electrical steel sheet and strip with a single small sheet sample

Professional Standard - Commodity Inspection, Single subject conductive adhesive test method

SN/T 2497.12-2010 Test method of import and export dangerous chemicals-Part 12: Single cell gel electrophoresis (SCGE) assay

Taiwan Provincial Standard of the People's Republic of China, Single subject conductive adhesive test method

CNS 14796-2-2004 Rubber insulated cables-rated voltages up to and including 450/750V Part 2：Test methods
CNS 14796.2-2004 Rubber insulated cables-rated voltages up to and including 450/750V Part 2：Test methods

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Single subject conductive adhesive test method

ASHRAE 37 ERTA-2012 Methods of Testing for Rating Electrically Driven Unitary Air-Conditioning and Heat Pump Equipment

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Single subject conductive adhesive test method

ASHRAE 37 ERTA-2016 Methods of Testing for Rating Electrically Driven Unitary Air-Conditioning and Heat Pump Equipment
ASHRAE 37-2009 Methods of Testing for Rating Electrically Driven Unitary Air-Conditioning and Heat-Pump Equipment
ASHRAE 37 ERTA-2005 Methods of Testing for Rating Electrically Driven Unitary Air-Conditioning and Heat Pump Equipment
ASHRAE 37-2005 Methods of Testing for Rating Electrically Driven Unitary Air-Conditioning and Heat Pump Equipment

SE-SIS, Single subject conductive adhesive test method

SIS SS 404 09 76-1986 Insulating materials — Specifications for pressure-sensitive adhesive tapes for electrical purposes — Methods of test

CENELEC - European Committee for Electrotechnical Standardization, Single subject conductive adhesive test method

EN 50265-2-2:1998 Common Tests Methods for Cable under Fire Conditions - Test for Resistance to Vertical Flame Propagation for a Single Insulated Conductor or Cable Part 2-2: Procedures - Diffusion Flame
EN 50265-2-1:1998 Common Test Methods for Cables under Fire Conditions - Test for Resistance to Vertical Flame Propagation for a Single Insulated Conductor or Cable Part 2-1: Procedures - 1 kW Pre-Mixed Flame

BE-NBN, Single subject conductive adhesive test method

NBN-HD 022.2-1994
NBN-HD 022.2-1993 Rubber insulated cables of rated voltages up to and including 450/750 V. Part 2: Test methods

European Association of Aerospace Industries, Single subject conductive adhesive test method

AECMA PREN 4158-2005 Aerospace series Paints and varnishes Test method for measurements of electrical surface resistance of conductive layers Edition P 1

Professional Standard - Electricity, Single subject conductive adhesive test method

DL/T 1332-2014 Field test guide of low-frequency power test method for excitation characteristic on current transformer

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Single subject conductive adhesive test method

IEEE PC62.35/D1-2018 Draft Standard for Test Methods for Silicon Avalanche Semiconductor Surge Protective Device Components

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Single subject conductive adhesive test method

PREN 3003-2002 Aerospace series Non-Metallic materials Structural adhesives Determination of mass per unit area of film adhesives Test method (Edition P 1)