ZH
RU
ES
Fuel Cell Test Protocol
Fuel Cell Test Protocol, Total:248 items.
In the international standard classification, Fuel Cell Test Protocol involves: Railway engineering in general, Commercial vehicles, Fuel cells, Electric road vehicles, Galvanic cells and batteries, Internal combustion engines for road vehicles, Road vehicle systems, Fuels, Electromagnetic compatibility (EMC), Electrical engineering in general, Ceramics, Nuclear energy engineering, Test conditions and procedures in general, Environmental protection, Solar energy engineering, Components and accessories for telecommunications equipment, Railway rolling stock, Components for electrical equipment, Rotating machinery, Insulating materials, Wind turbine systems and other alternative sources of energy, Protection against fire, Electrical wires and cables, Analytical chemistry, Microbiology, Petroleum, petroleum products and natural gas handling equipment.
Group Standards of the People's Republic of China, Fuel Cell Test Protocol
- T/SDAS 187-2020 Fule cell rolling stock-Performance test methods of fuel cell stack
- T/CSAE 276-2022 Fuel cell stack vibration test specification
- T/CASME 674-2023 Specification for performance test of voltage monitors for fuel cell systems
- T/CAAMTB 12-2020 Proton exchange membrane fuel cell membrane electrode test method
- T/CI 090-2023 Performance test methods of ejector for fuel cell system
- T/QGCML 1496-2023 Technical specifications for water pump performance testing of fuel cell systems
- T/QGCML 1498-2023 Technical specifications for performance testing of air compressors for fuel cell systems
- T/QGCML 1497-2023 Technical specifications for performance testing of humidifiers for fuel cell systems
- T/CASME 520-2023 Test method for proton exchange membrane fuel cell coating metal bipolar plate
- T/ZJCX 0034-2023 Test standard of graphite bipolar plate characteristics for proton exchange membrane fuel cell
- T/GHDQ 47-2019 Technical conditions of fuel cell stack life test at subzero environment for fuel cell vehicles in frigid regions
- T/CES 176-2022 Evaluation method for lifetime of stationary proton exchange membrane fuel cell stack
- T/JXQN 2002-2022 Salt spray corrosion test and grade evaluation of fuel cell engine system in coastal area
- T/CSEE 0186-2021 Code of practice for acceptance test of gas turbine protection system in power station
- T/CAB 0246-2023 General technical specification for hydrogen quality detection for proton exchange membrane fuel cell of mobile laboratory
国家市场监督管理总局、中国国家标准化管理委员会, Fuel Cell Test Protocol
- GB/T 39132-2020 Fuel cell electric vehicle engineering approval evaluation program
- GB/T 28817-2022 Single cell test methods for polymer electrolyte fuel cell (PEFC)
- GB/T 37154-2018 Fuel cell electric vehicles—Test methods of hydrogen emission
- GB/T 20042.3-2022 Proton exchange membrane fuel cell—Part 3: Test method for proton exchange membrane
- GB/T 38914-2020 Evaluation method for lifetime of proton exchange membrane fuel cell stack in vehicle application
British Standards Institution (BSI), Fuel Cell Test Protocol
- PD IEC/TS 62282-7-1:2017 Fuel cell technologies. Test methods. Single cell performance tests for polymer electrolyte fuel cells (PEFC)
- BS EN 62282-3-201:2017+A1:2022 Fuel cell technologies - Stationary fuel cell power systems. Performance test methods for small fuel cell power systems
- BS PD IEC/TS 62282-7-2:2014 Fuel cell technologies. Test methods. Single cell and stack performance tests for solid oxide fuel cells (SOFC)
- BS EN IEC 62282-7-2:2021 Tracked Changes. Fuel cell technologies. Test methods. Single cell and stack performance tests for solid oxide fuel cells
- BS EN 62282-6-200:2017 Tracked Changes. Fuel cell technologies. Micro fuel cell power systems. Performance test methods
- 20/30412786 DC BS EN 62282-7-2. Fuel cell technologies. Part 7-2. Test methods. Single cell and stack performance tests for solid oxide fuel cells (SOFC)
- BS EN IEC 62282-8-201:2020 Fuel cell technologies. Energy storage systems using fuel cell modules in reverse mode. Test procedures for the performance of power-to-power systems
- 23/30470506 DC BS EN IEC 62282-3-201. Fuel cell technologies - Part 3-201. Stationary fuel cell power systems. Performance test methods for small fuel cell power systems
- 20/30422600 DC BS EN 62282-3-201 AMD1. Fuel cell technologies. Part 3-201. Stationary fuel cell power systems. Performance test methods for small fuel cell power systems
- 19/30397959 DC BS EN 62282-3-201 AMD1. Fuel cell technologies. Part 3-201. Stationary fuel cell power systems. Performance test methods for small fuel cell power systems
- BS EN IEC 62282-8-101:2020 Fuel cell technologies. Energy storage systems using fuel cell modules in reverse mode. Test procedures for the performance of solid oxide single cells and stacks, including reversible operation
- BS EN IEC 62282-4-102:2023 Tracked Changes. Fuel cell technologies. Fuel cell power systems for electrically powered industrial trucks. Performance test methods
- BS EN IEC 62282-8-102:2020 Fuel cell technologies - Energy storage systems using fuel cell modules in reverse mode. Test procedures for the performance of single cells and stacks with proton exchange membranes, including reversible operation
- BS EN IEC 62282-4-600:2022 Fuel cell technologies - Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Fuel cell/battery hybrid systems performance test methods for excavators
- 23/30470502 DC BS EN IEC 62282-3-200. Fuel cell technologies - Part 3-200. Stationary fuel cell power systems. Performance test methods
- 22/30445185 DC BS EN 62282-8-201. Fuel cell technologies. Part 8-201. Energy storage systems using fuel cell modules in reverse mode. Test procedures for the performance of power-to-power systems
- 17/30352625 DC BS IEC 62282-8-101. Fuel cell technologies. Part 8-101. Energy storage systems using fuel cell modules in reverse mode. Test procedures for solid oxide single cell and stack performance including reversing operation
- 18/30352664 DC BS IEC 62282-8-102. Fuel cell technologies. Part 8-102. Energy storage systems using fuel cell modules in reverse mode. Test procedures for proton exchange membrane single cell and stack performance including reversing operation
- 20/30419213 DC BS EN 62282-4-202. Fuel cell technologies. Part 4-202. Fuel Cell Power Systems for unmanned aircraft systems. Performance test methods
- 21/30434916 DC BS EN 62282-4-600. Fuel cell technologies. Part 4-600. Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Fuel cell/battery hybrid power pack systems performance test methods for excavators
- 21/30440606 DC BS EN 62282-6-401. Fuel cell technologies. Part 6-401. Micro fuel cell power systems. Power and data interchangeability. Performance test methods for laptop computers
- 20/30402570 DC BS IEC 62282-4-600. Fuel cell technologies. Part 4-600. Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Fuel cell and battery hybrid power pack systems performance test methods for excavators
- 21/30440998 DC BS EN IEC 62282-4-102. Fuel cell technologies. Part 4-102. Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Fuel cell power systems for electrically powered industrial trucks. Performance test methods
- 21/30433542 DC BS EN 62282-8-301. Fuel cell technologies. Part 8-301. Energy storage systems using fuel cell modules in reverse mode. Power to methane energy systems based on solid oxide cells including reversible operation. Performance test methods
- 23/30434816 DC BS EN IEC 63341-3. Railway applications. Rolling stock - Part 3. Fuel cell systems for propulsion. Performance test methods
- BS EN 61034-2:2005+A2:2020 Measurement of smoke density of cables burning under defined conditions - Test procedure and requirements
- BS EN 60754-2:2014+A1:2020 Test on gases evolved during combustion of materials from cables - Determination of acidity (by pH measurement) and conductivity
- BS EN 61034-2:2005+A1:2013 Measurement of smoke density of cables burning under defined conditions. Test procedure and requirements
- BS EN 50267-2-2:1999 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity - Determination of degree of
- BS EN 61034-2:2005 Measurement of smoke density of cables burning under defined conditions - Test procedure and requirements
- BS EN 60754-1:2014+A1:2020 Test on gases evolved during combustion of materials from cables - Determination of the halogen acid gas content
International Electrotechnical Commission (IEC), Fuel Cell Test Protocol
- IEC TS 62282-7-1:2017 Fuel cell technologies - Part 7-1: Test methods - Single cell performance tests for polymer electrolyte fuel cells (PEFC)
- IEC 105/241/DTS:2009 Fuel cell technologies - Part 7-1: Single cell test methods for polymer electrolyte fuel cell (PEFC)
- IEC 62282-3-201:2017 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
- IEC 62282-3-200:2015 Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods
- IEC 62282-6-200:2016 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
- IEC 62282-6-200:2007 Fuel cell technologies - Part 6-2: Micro fuel cell power systems - Performance test methods
- IEC 62282-6-200:2012 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
- IEC 62282-4-600:2022 Fuel cell technologies - Part 4-600: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Fuel cell/battery hybrid systems performance test methods for exc
- IEC 62282-8-102:2019 Fuel cell technologies - Part 8-102: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of single cells and stacks with proton exchange membrane, incl
- IEC 62282-8-201:2020 Fuel cell technologies - Part 8-201: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of power-to-power systems
- IEC 62282-4-202:2023 Fuel cell technologies - Part 4-202: Fuel cell power systems for propulsion and auxiliary power units - Unmanned aircrafts - Performance test methods
- IEC 62282-8-101:2020 Fuel cell technologies - Part 8-101: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of solid oxide single cells and stacks, including reversible o
- IEC 60413:1972 Test procedures for determining physical properties of brush materials for electrical machines
RU-GOST R, Fuel Cell Test Protocol
- GOST IEC/TS 62282-7-1-2016 Fuel cell technologies. Part 7-1. Single cell test methods for polymer electrolyte fuel cell
- GOST R IEC 60754-2-1999 Tests of materials from cables during combustion. Determination of degree of evolved gases by measuring pH and conductivity
Professional Standard - Energy, Fuel Cell Test Protocol
国家能源局, Fuel Cell Test Protocol
- NB/T 10820-2021 Solid oxide fuel cell single cell test method
- NB/T 10821-2021 Solid oxide fuel cell stack test method
- NB/T 20400-2017 Technical regulations for manufacturing stainless steel components in reactor cavity pools and spent fuel pools in pressurized water reactor nuclear power plants
- NB/T 10628-2021 Technical Specifications for Testing and Inspection of Wind Farm Engineering Materials
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Fuel Cell Test Protocol
- GB/T 28817-2012 Single cell test methods for polymer electrolyte fuel cell (PEFC)
- GB/T 28183-2011 Test methods of fuel cell power system for bus
- GB/T 23645-2009 Test methods of fuel cell power system for passenger cars
- GB/T 25447-2010 Proton exchange membrane fuel cell test bench and activation bench
- GB/T 20042.5-2009 Proton exchange membrane fuel cell.Part 5:Test method for membrane electrode assembly
- GB/T 20042.4-2009 Proton exchange membrane fuel cell.Part 4:Test method for electrocatalysts
- GB/Z 27753-2011 Test method for adaptability to operating conditions of membrane electrode assembly used in PEM fuel cells
- GB/T 20042.7-2014 Proton exchange membrane fuel cells.Part 7: Test method of carbon paper properties
- GB/T 20042.3-2009 Proton exchange membrane fuel cell.Part 3:Test method for proton exchange membrane
- GB/T 20042.6-2011 Proton exchange membrane fuel cell.Part 6: Test method of bipolar plate properties
- GB/T 42847.2-2023 Reversible mode fuel cell modules for energy storage systems Part 2: Performance test methods for reversible mode proton exchange membrane cells and stacks
- GB/T 42847.3-2023 Reversible mode fuel cell modules for energy storage systems Part 3: Electrical energy storage system performance test methods
- GB/T 31886.1-2015 Test method about the influence of gaseous contaminants in reaction gas on the performance of proton exchange membrane fuel cells.Part 1:Gaseous contaminants in air
- GB/T 31886.2-2015 Test method about the influence of gaseous contaminants in reaction gas on the performance of proton exchange membrane fuel cells.Part 2:Gaseous contaminants in hydrogen
- GB/T 31467.1-2015 Lithium-ion traction battery pack and system for electric vehicles.Part 1:Test specification for high power applications
- GB/T 31467.2-2015 Lithium-ion traction battery pack and system for electric vehicles.Part 2:Test specification for high energy applications
Korean Agency for Technology and Standards (KATS), Fuel Cell Test Protocol
- KS C IEC TS 62282-7-2:2016 Fuel cell technologies ― Part 7-2: Test methods ― Single cell and stack performance tests for solid oxide fuel cells(SOFC)
- KS C IEC 62282-3-200-2014(2019) Fuel cell technologies — Part 3-200: Stationary fuel cell power systems — Performance test methods
- KS C IEC 62282-6-200-2014(2019) Fuel cell technologies — Part 6-200: Micro fuel cell power systems — Performance test methods
- KS C IEC 62282-3-200:2014 Fuel cell technologies — Part 3-200: Stationary fuel cell power systems — Performance test methods
- KS C IEC 62282-6-200:2009 Micro fuel cell power systems-Performance test methods
- KS C IEC 62282-6-200:2014 Fuel cell technologies — Part 6-200: Micro fuel cell power systems — Performance test methods
- KS C IEC 60754-2:2019 Test on gases evolved during combustion of materials from cables — Part 2: Determination of acidity(by pH measurement) and conductivity
- KS C IEC 60413:2006 Test procedures for determining physical properties of brush materials for electrical machines
- KS C IEC 60413:2013 Test procedures for determining physical properties of brush materials for electrical machines
- KS C IEC 60754-1:2019 Test on gases evolved during combustion of materials from cables — Part 1: Determination of the halogen acid gas content
ES-UNE, Fuel Cell Test Protocol
- UNE-EN IEC 62282-7-2:2021 Fuel cell technologies - Part 7-2: Test methods - Single cell and stack performance tests for solid oxide fuel cells (SOFCs) (Endorsed by Asociación Española de Normalización in September of 2021.)
- UNE-EN 62282-3-201:2017 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems (Endorsed by Asociación Española de Normalización in December of 2017.)
- UNE-EN 62282-3-201:2017/A1:2022 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems (Endorsed by Asociación Española de Normalización in April of 2022.)
- UNE-EN 62282-3-200:2016 Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods (Endorsed by AENOR in April of 2016.)
- UNE-EN 62282-6-200:2017 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods (Endorsed by Asociación Española de Normalización in March of 2017.)
- UNE-EN 62282-4-102:2017 Fuel cell technologies - Part 4-102: Fuel cell power systems for industrial electric trucks - Performance test methods (Endorsed by Asociación Española de Normalización in August of 2017.)
- UNE-EN IEC 62282-4-102:2023 Fuel cell technologies - Part 4-102: Fuel cell power systems for electrically powered industrial trucks - Performance test methods (Endorsed by Asociación Española de Normalización in March of 2023.)
- UNE-EN IEC 62282-8-201:2020 Fuel cell technologies - Part 8-201: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of power-to-power systems (Endorsed by Asociación Española de Normalización in April of 2020.)
- UNE-EN IEC 62282-8-102:2020 Fuel cell technologies - Part 8-102: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of single cells and stacks with proton exchange membranes, including reversible operation (Endorsed by Asociación...
- UNE-EN IEC 62282-8-101:2020 Fuel cell technologies - Part 8-101: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of solid oxide single cells and stacks, including reversible operation (Endorsed by Asociación Española de Norma...
- UNE-EN IEC 62282-8-301:2023 Fuel cell technologies - Part 8-301: Energy storage systems using fuel cell modules in reverse mode - Power-to-methane energy systems based on solid oxide cells including reversible operation - Performance test methods (Endorsed by Asociación Español...
- UNE-EN 60754-2:2014/A1:2021 Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity
Danish Standards Foundation, Fuel Cell Test Protocol
- DS/IEC/TS 62282-7-1:2012 Fuel cell technologies - Part 7-1: Single cell test methods for polymer electrolyte fuel cell (PEFC)
- DS/EN IEC 62282-7-2:2021 Fuel cell technologies – Part 7-2: Test methods – Single cell and stack performance tests for solid oxide fuel cells (SOFCs)
- DS/EN 62282-3-201:2013 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
- DS/EN 62282-6-200:2013 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
- DS/EN 62282-3-200:2012 Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods
- DS/EN 50267-2-2:1999 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of material from cables - Part 2-2: Procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity
European Committee for Electrotechnical Standardization（CENELEC）, Fuel Cell Test Protocol
- EN IEC 62282-7-2:2021 Fuel cell technologies - Part 7-2: Test methods - Single cell and stack performance tests for solid oxide fuel cells (SOFCs)
- EN 62282-3-201:2013 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
- EN 62282-3-201:2017 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
- EN 62282-6-200:2012 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
- EN 62282-6-200:2017 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
- EN IEC 62282-4-102:2023 Fuel cell technologies - Part 4-102: Fuel cell power systems for electrically powered industrial trucks - Performance test methods
- EN 62282-4-102:2017 Fuel cell technologies - Part 4-102: Fuel cell power systems for industrial electric trucks - Performance test methods
- EN IEC 62282-8-101:2020 Fuel cell technologies - Part 8-101: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of solid oxide single cells and stacks, including reversible operation
- EN IEC 62282-4-600:2022 Fuel cell technologies - Part 4-600: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Fuel cell/battery hybrid systems performance test methods for excavators
- EN IEC 62282-8-201:2020 Fuel cell technologies - Part 8-201: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of power-to-power systems
- EN IEC 62282-8-102:2020 Fuel cell technologies - Part 8-102: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of single cells and stacks with proton exchange membranes, including reversible operation
- EN IEC 62282-8-301:2023 Fuel cell technologies - Part 8-301: Energy storage systems using fuel cell modules in reverse mode - Power-to-methane energy systems based on solid oxide cells including reversible operation - Performance test methods
Association Francaise de Normalisation, Fuel Cell Test Protocol
- NF C56-282-7-2*NF EN IEC 62282-7-2:2021 Fuel cell technologies - Part 7-2 : test methods - Single cell and stack performance tests for solid oxide fuel cells (SOFCs)
- NF EN 62282-6-200:2017 Technologies des piles à combustibles - Partie 6-200 : Systèmes à micro-piles à combustible - Méthodes d'essai des performances
- NF EN 15502-2-1/IN1:2017 Technologies des piles à combustibles - Partie 6-200 : Systèmes à micro-piles à combustible - Méthodes d'essai des performances
- NF C56-282-6-200:2008 Fuel cell technologies - Part 6-200 : micro fuel cell power systems - Performance test methods.
- NF C56-282-6-200:2012 Fuel cell technologies - Part 6-200 : micro fuel cell power systems - Performance test methods
- NF EN 62282-3-200:2016 Technologies des piles à combustible - Partie 3-200 : systèmes à piles à combustible stationnaires - Méthodes d'essai des performances
- NF C56-282-3-201/A1*NF EN 62282-3-201/A1:2022 Fuel cell technologies - Part 3-201 : stationary fuel cell power systems - Performance test methods for small fuel cell power systems
- NF C56-282-3-201*NF EN 62282-3-201:2017 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
- NF C56-282-6-200*NF EN 62282-6-200:2017 Fuel cell technologies - Part 6-200 : micro fuel cell power systems - Performance test methods
- NF C56-282-3-200*NF EN 62282-3-200:2016 Fuel cell technologies - Part 3-200 : stationary fuel cell power systems - Performance test methods
- NF EN IEC 62282-8-201:2020 Technologies des piles à combustible - Partie 8 201 : systèmes de stockage de l'énergie utilisant des modules à piles à combustible en mode inversé - Procédures d'essai pour la performance des systèmes électriques à électriques
- NF C56-282-4-102*NF EN 62282-4-102:2017 Fuel cell technologies - Part 4-102 : fuel cell power systems for industrial electric trucks - Performance test methods
- NF C56-282-8-101*NF EN IEC 62282-8-101:2020 Fuel cell technologies - Part 8-101 : energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of solid oxide single cells and stacks, including reversible operation
- NF C56-282-8-201*NF EN IEC 62282-8-201:2020 Fuel cell technologies - Part 8-201: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of power-to-power systems
- NF C56-282-8-102*NF EN IEC 62282-8-102:2020 Fuel cell technologies - Part 8-102 : energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of single cells and stacks with proton exchange membranes, including reversible operation
IEC - International Electrotechnical Commission, Fuel Cell Test Protocol
- TS 62282-7-1-2010 Fuel cell technologies – Part 7-1: Single cell test methods for polymer electrolyte fuel cell (PEFC) (Edition 1.0)
Society of Automotive Engineers (SAE), Fuel Cell Test Protocol
- SAE J2572-2008 Recommended Practice for Measuring Fuel Consumption and Range of Fuel Cell and Hybrid Fuel Cell Vehicles Fuelled by Compressed Gaseous Hydrogen
- SAE J2615-2011 Testing Performance of Fuel Cell Systems for Automotive Applications
- SAE J1495-1992 Test Procedure for Battery Flame Retardant Venting Systems
- SAE J1495-1998 Test Procedure for Battery Flame Retardant Venting Systems
- SAE J2572-2006 Recommended Practice for Measuring Fuel Consumption and Range of Fuel Cell and Hybrid Fuel Cell Vehicles Fuelled by Compressed Gaseous Hydrogen
- SAE J2616-2011 Testing Performance of the Fuel Processor Subsystem of an Automotive Fuel Cell System
- SAE J1495-2013 Test Procedure for Battery Flame Retardant Venting Systems
- SAE J2617-2007 Recommended Practice for Testing Performance of PEM Fuel Cell Stack Sub-system for Automotive Applications
- SAE J2617-2011 Recommended Practice for Testing Performance of PEM Fuel Cell Stack Sub-system for Automotive Applications
- SAE J2578-2009 Recommended Practice for General Fuel Cell Vehicle Safety
- SAE J2578-2014 Recommended Practice for General Fuel Cell Vehicle Safety
- SAE AIR6202-2017 Test Cell Mass Fuel Flow Measurement Using Coriolis Flow Meters
- SAE J2594-2003 Recommended Practice To Design For Recycling Proton Exchange Membrane (PEM) Fuel Cell Systems
- SAE J2594-2011 Recommended Practice to Design for Recycling Proton Exchange Membrane (PEM) Fuel Cell Systems
- SAE J1515-2011 Impact of Alternative Fuels on Engine Test and Reporting procedures
- SAE J1264-2011 Joint RCCC/SAE Fuel Consumption Test Procedure (Short Term In-Service Vehicle) Type I
- SAE MAP1794-2002 Aircraft Recommended Practice, Ball-On-Cylinder (Boc) Aircraft Turbine Fuel Lubricity Tester
- SAE J1737-2004 Test Procedure to Determine the Hydrocarbon Losses from Fuel Tubes, Hoses, Fittings, and Fuel Line Assemblies by Recirculation
- SAE J1737-2013 Test Procedure to Determine the Hydrocarbon Losses from Fuel Tubes, Hoses, Fittings, and Fuel Line Assemblies by Recirculation
SAE - SAE International, Fuel Cell Test Protocol
- SAE J2572-2014 Recommended Practice for Measuring Fuel Consumption and Range of Fuel Cell and Hybrid Fuel Cell Vehicles Fueled by Compressed Gaseous Hydrogen
- SAE J1495-2018 Test Procedure for Battery Flame Retardant Venting Systems
- SAE J1495-2012 Test Procedure for Battery Flame Retardant Venting Systems
- SAE J2616-2005 Testing Performance of the Fuel Processor Subsystem of an Automotive Fuel Cell System
- SAE AIR6202-2012 Test Cell Mass Fuel Flow Measurement Using Coriolis Flow Meters
- SAE J1515-1988 Impact of Alternative Fuels on Engine Test and Reporting Procedures@ Information Report;
- SAE J1737-2019 Test Procedure to Determine the Hydrocarbon Losses from Fuel Tubes@ Hoses@ Fittings@ and Fuel Line Assemblies by Recirculation
German Institute for Standardization, Fuel Cell Test Protocol
- DIN IEC/TS 62282-7-1:2017 Fuel cell technologies - Part 7-1: Test methods - Single cell performance tests for polymer electrolyte fuel cells (PEFC) (IEC/TS 62282-7-1:2017)
- DIN IEC/TS 62282-7-2:2015 Fuel cell technologies - Part 7-2: Test methods - Single cell and stack performance tests for solid oxide fuel cells (SOFC) (IEC/TS 62282-7-2:2014)
- DIN IEC/TS 62282-7-2:2011 Fuel cell technologies - Part 7-2: Single cell/stack-performance test methods for solid oxide fuel cells (SOFC) (IEC 105/322/NP:2011)
- DIN EN IEC 62282-8-102:2021 Fuel cell technologies - Part 8-102: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of single cells and stacks with proton exchange membranes, including reversible operation (IEC 62282-8-102:2019); Ger
- DIN EN IEC 62282-8-201:2020 Fuel cell technologies - Part 8-201: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of power-to-power systems (IEC 62282-8-201:2020); German version EN IEC 62282-8-201:2020
European Committee for Standardization (CEN), Fuel Cell Test Protocol
AENOR, Fuel Cell Test Protocol
- UNE-EN 62282-3-201:2013 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
- UNE-EN 62282-6-200:2013 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
- UNE-EN 62282-3-200:2012 Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods
CENELEC - European Committee for Electrotechnical Standardization, Fuel Cell Test Protocol
- EN 62282-6-200:2008 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
- EN 62282-3-2:2006 Fuel cell technologies Part 3-2: Stationary fuel cell power systems - Performance test methods
Lithuanian Standards Office , Fuel Cell Test Protocol
- LST EN IEC 62282-7-2:2021 Fuel cell technologies - Part 7-2: Test methods - Single cell and stack performance tests for solid oxide fuel cells (SOFCs) (IEC 62282-7-2:2021)
- LST EN 62282-6-200-2008 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods (IEC 62282-6-200:2007)
- LST EN 62282-6-200-2013 Fuel cell technologies -- Part 6-200: Micro fuel cell power systems - Performance test methods (IEC 62282-6-200:2012)
- LST EN 62282-3-200-2012 Fuel cell technologies -- Part 3-200: Stationary fuel cell power systems - Performance test methods (IEC 62282-3-200:2011)
Standard Association of Australia （SAA）, Fuel Cell Test Protocol
- IEC 62282-4-102:2022 RLV Fuel cell technologies — Part 4-102: Fuel cell power systems for electrically powered industrial trucks — Performance test methods
- IEC 62282-4-102:2022 Fuel cell technologies — Part 4-102: Fuel cell power systems for electrically powered industrial trucks — Performance test methods
- AS/NZS IEC 60754.2:2017 Test on gases evolved during combustion of materials from cables, Part 2: Determination of acidity (by pH measurement) and conductivity
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Fuel Cell Test Protocol
- GB/T 34593-2017 Test methods of hydrogen emission for fuel cell engine
- GB/T 33979-2017 Test methods for proton exchange membrane fuel cell power system at subzero environment
KR-KS, Fuel Cell Test Protocol
- KS C IEC TS 62282-7-2-2016 Fuel cell technologies ― Part 7-2: Test methods ― Single cell and stack performance tests for solid oxide fuel cells(SOFC)
- KS C IEC 62282-8-102-2023 Fuel cell technologies — Part 8-102: Energy storage systems using fuel cell modules in reverse mode — Test procedures for the performance of single cells and stacks with proton exchange membranes, inc
- KS C IEC 60754-2-2019 Test on gases evolved during combustion of materials from cables — Part 2: Determination of acidity(by pH measurement) and conductivity
- KS C IEC 60754-1-2019 Test on gases evolved during combustion of materials from cables — Part 1: Determination of the halogen acid gas content
AT-OVE/ON, Fuel Cell Test Protocol
- OVE EN 62282-3-201/A1-2021 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems (IEC 105/839/CDV) (Amendment) (english version)
- OVE EN IEC 62282-4-600:2021 Fuel cell technologies - Part 4-600: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Fuel cell/battery hybrid systems performance test methods for excavators (IEC 105/864/CDV) (english version)
- OVE EN IEC 62282-8-102:2021 Fuel cell technologies - Part 8-102: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of single cells and stacks with proton exchange membranes, including reversible operation ((IEC 62282-8-102:2019) EN
Japanese Industrial Standards Committee (JISC), Fuel Cell Test Protocol
- JIS C 8823:2008 Testing methods for small polymer electrolyte fuel cell power systems
- JIS C 8822:2008 General safety code for small polymer electrolyte fuel cell power systems
- JIS C 8825:2008 Testing and measurement techniques of small polymer electrolyte fuel cell power systems
- JIS C 8824:2008 Testing methods for environment of small polymer electrolyte fuel cell power systems
- JIS R 1761:2016 Testing method for gas permeability of porous ceramics using solid oxide fuel cell
- JIS C 8841-2:2011 Small solid oxide fuel cell power systems -- Part 2: General safety codes and safety testing methods
- JIS C 8827:2011 Testing procedure of islanding prevention measures for utility-interconnected small polymer electrolyte fuel cell power system power conditioners
- JIS C 8841-3:2011 Small solid oxide fuel cell power systems -- Part 3: Performance testing methods and environment testing methods
- JIS C 8826:2008 Testing methods of power conditioner for grid interconnected small polymer electrolyte fuel cell power systems
- JIS C 8826:2011 Testing methods of power conditioner for grid interconnected small fuel cell power systems
American Society of Mechanical Engineers (ASME), Fuel Cell Test Protocol
PL-PKN, Fuel Cell Test Protocol
- PN-EN IEC 62282-8-101-2020-11 E Fuel cell technologies - Part 8-101: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of solid oxide single cells and stacks, including reversible operation (IEC 62282-8-101:2020)
American Society for Testing and Materials (ASTM), Fuel Cell Test Protocol
- ASTM D7606-11 Standard Practice for Sampling of High Pressure Hydrogen and Related Fuel Cell Feed Gases
- ASTM D7606-17 Standard Practice for Sampling of High Pressure Hydrogen and Related Fuel Cell Feed Gases
- ASTM D7464-08 Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing
- ASTM D7464-14 Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing
National Metrological Verification Regulations of the People's Republic of China, Fuel Cell Test Protocol
- JJG(船舶) 01-1990 Verification regulations for lead-acid battery electrical performance tester
- JJG(机械) 114-1992 SP-428 Verification Regulations for Electrostatic Photosensitive Material Electrical Performance Tester
未注明发布机构, Fuel Cell Test Protocol
- SAE J2594-2016 Recommended Practice To Design For Recycling Proton Exchange Membrane (PEM) Fuel Cell Systems
- BS EN IEC 62282-8-301:2023 Fuel cell technologies Part 8 - 301 : Energy storage systems using fuel cell modules in reverse mode — Power - to - methane energy systems based on solid oxide cells including reversible operation — Performance test methods
U.S. Military Regulations and Norms, Fuel Cell Test Protocol
Guangdong Provincial Standard of the People's Republic of China, Fuel Cell Test Protocol
- DB44/T 1478-2014 Test procedures for nickel metal hydride batteries for electric vehicles
Professional Standard - Electricity, Fuel Cell Test Protocol
- DL/T 2206-2021 Distributed Power Gas Power Generation Performance Test Regulations
US-CFR-file, Fuel Cell Test Protocol
- CFR 40-80.177-2014 Protection of Environment. Part80:Regulation of fuels and fuel additives.Section80.177:Certification test fuels for use with the alternative test procedures and standards.
- CFR 40-80.165-2014 Protection of Environment. Part80:Regulation of fuels and fuel additives.Section80.165:Certification test procedures and standards.
- CFR 40-80.176-2014 Protection of Environment. Part80:Regulation of fuels and fuel additives.Section80.176:Alternative certification test procedures and standards.
IX-IX-IEC, Fuel Cell Test Protocol
- IEC 62282-8-301:2023 Fuel cell technologies - Part 8-301: Energy storage systems using fuel cell modules in reverse mode - Power-to-methane energy systems based on solid oxide cells including reversible operation - Performance test methods
IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Fuel Cell Test Protocol
- IEEE 450-1975 Recommended Practice for Maintenance@ Testing@ and Replacement of Large Lead Storage Batteries for Generating Stations and Substations
- IEEE 450-1972 Recommended Practice for Maintenance@ Testing@ and Replacement of Large Stationary Type Power Plant and Substation Lead Storage Batteries
ZA-SANS, Fuel Cell Test Protocol
- NRS 052-2-2-1999 Photovoltaic systems for use in individual homes Part 2: Test procedures for main components Section 2: Test procedures for batteries
American National Standards Institute （ANSI), Fuel Cell Test Protocol
- ANSI/SCTE 48-3-2011 Test Procedure for Measuring Shielding Effectiveness of Braided Coaxial Drop Cable Using the GTEM Cell
- ANSI/ASTM D4306:2013 Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
- ANSI/ASTM D618:1995 Practice for Conditioning Plastics and Electrical Insulating Materials for Testing (08.01)
- ANSI/ASTM D6986:2010 Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)
- ANSI/OPEI B71.10-2013 Off-Road Ground-Supported Outdoor Power Equipment - Gasoline Fuel Systems - Performance Specifications and Test Procedures
GB-REG, Fuel Cell Test Protocol
- REG NASA-LLIS-3339-2010 Lessons Learned - Space Shuttle Fuel Cell System Missing Critical Instrumentation Forces Turnaround Testing Complexities
Institute of Electrical and Electronics Engineers (IEEE), Fuel Cell Test Protocol
- ANSI/IEEE Std 450-1975 IEEE Recommended Practice for Maintenance, Testing, and Replacement of Large Lead Storage Batteries for Generating Stations and Substations
- ANSI/IEEE Std 1106-1987 IEEE Recommended Practice for Maintenance, Testing, and Replacement of Nickel-Cadmium Storage Batteries for Generating Stations and Substations
- IEEE Std 450-1972 IEEE Recommended Practice for Maintenance, Testing, and Replacement of Large Stationary Type Power Plant and Substation Lead Storage Batteries
- IEEE/ANSI 450-1987 IEEE Recommended Practice for Maintenance,Testing, and Replacement of Large Lead Batteries for Generating Stations and Substations
- ANSI/IEEE 450-1980 IEEE Recommended Practice for Maintenance, Testing , and Replacement of Large Lead Storage Batteries for Generating Stations and Substations
- ANSI/IEEE Std 450-1987 IEEE Recommended Practice for Maintenance,Testing, and Replacement of Large Lead Batteries for Generating Stations and Substations
- IEEE Std 1106-1995 IEEE Recommended practice for installation,maintenance,testing, and replacement of vented nickel-cadmium batteries for stationary applications
NZ-SNZ, Fuel Cell Test Protocol
- AS/NZS 1660.5.3:1998 Test Methods for Electric Cables, Cords and Conductors Method 5.3: Fire Tests - Determination of the Amount of Halogen Acid Gas Evolved During the Combustion of Polymeric Materials Taken from Cables
- AS/NZS 1660.5.4:1998 Test Methods for Electric Cables, Cords and Conductors Method 5.4: Fire Tests - Determination of Degree of Acidity of Gases Evolved During the Combustion of Materials Taken from Electric Cables by Measuring pH and Conductivity
IN-BIS, Fuel Cell Test Protocol