ZH
RU
ES

Three-point bending test machine

Three-point bending test machine, Total:148 items.

In the international standard classification, Three-point bending test machine involves: Plastics, Materials for aerospace construction, Glass, Farming and forestry, Valves, Pipeline components and pipelines, Leather technology, Inorganic chemicals, Refractories, Products of the textile industry, Construction materials, Ceramics, Road vehicle systems, Rubber, Medical equipment, Paper products, Paper and board, Reinforced plastics, Earthworks. Excavations. Foundation construction. Underground works, Insulating materials, Fruits. Vegetables, Waxes, bituminous materials and other petroleum products, Electromechanical components for electronic and telecommunications equipment, Products of the chemical industry, Electronic display devices, Raw materials for rubber and plastics, Road engineering, Semiconductor devices.

American Society for Testing and Materials (ASTM), Three-point bending test machine

ASTM D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM E2092-00 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-04 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-03 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18a Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D8058-19 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM E2092-13 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM E2092-23 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D5023-99 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM C78/C78M-10 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-10e1 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-18 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-21 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-16 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM D8458-22 Standard Test Method for Evaluation of Fatigue Performance of Asphalt Mixtures Using the Three-Point Bending Cylinder (3PBC) Test
ASTM D8058-17 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D8058-17e1 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM E2769-13 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-15 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-16 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM C78/C78M-22 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-15 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM D5342-97 Standard Test Method for Resistance to Bending of Paper and Paperboard (Taber-Type Tester in Basic Configuration)
ASTM D5342-97(2002) Standard Test Method for Resistance to Bending of Paper and Paperboard (Taber-Type Tester in Basic Configuration)
ASTM D5342-97(2007) Standard Test Method for Resistance to Bending of Paper and Paperboard (Taber-Type Tester in Basic Configuration)
ASTM E2092-09 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2769-22 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-11 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM C1609/C1609M-19 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-05 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-06 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-07 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-19a Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-12 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1609/C1609M-10 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C947-03 Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
ASTM C947-99 Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
ASTM D1635/D1635M-19 Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
ASTM D7972-14(2020) Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature
ASTM E2769-18 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM D5934-96 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending
ASTM C947-03(2016) Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
ASTM C1018-97 Standard Test Method for Flexural Toughness and First-Crack Strength of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading) (Withdrawn 2006)
ASTM C947-03(2023) Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
ASTM D5934-02 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending

British Standards Institution (BSI), Three-point bending test machine

BS EN 2746:1998 Glass fibre reinforced plastics - Flexural test - Three point bend method
BS EN 13335:2002 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method
BS ISO 23242:2020 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
19/30375027 DC BS ISO 23242. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
BS EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method
BS ISO 11093-6:2007 Paper and board - Testing of cores - Determination of bending strength by the three-point method
BS EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of interlaminar shear strength by short span bend test (three points)
BS EN 658-5:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of interlaminar shear strength by short span bend test (three points)
BS EN 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations – Test 16c: Contact-bending strength
BS PD CEN/TS 15963:2014 Bitumen and bituminous binders. Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS DD CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS IEC 61747-40-2:2015 Liquid crystal display devices. Mechanical testing of display cover glass for mobile devices. Uniaxial flexural strength (4-point bend)
BS 6043-3.5.1:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of flexural strength - Three point method

German Institute for Standardization, Three-point bending test machine

DIN EN 2746:1998-10 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN EN 12100:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for the resistance to bending between supports; German version EN 12100:1997
DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters
DIN EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN EN 1288-3:2000-09 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); German version EN 1288-3:2000 / Note: To be replaced by DIN EN ISO 1288-3 (2007-10).
DIN 51902:2020 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN EN 60512-16-3:2009 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength (IEC 60512-16-3:2008); German version EN 60512-16-3:2008
DIN SPEC 1026:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen; German version CEN/TS 15963:2010
DIN EN 658-5:2003-03 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three-points); German version EN 658-5:2002
DIN EN 60512-16-14:2009 Connectors for electronic equipment - Tests and measurements - Part 16-14: Mechanical tests on contacts and terminations - Test 16n: Bending strength, fixed male tabs (IEC 60512-16-14:2008); German version EN 60512-16-14:2008

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Three-point bending test machine

GB/T 34171-2017 Test method for flexural property of thin and ultrathin glass—Three-point bending method

American National Standards Institute （ANSI), Three-point bending test machine

ANSI/ASAE S459-1993 Shear and Three-Point Bending Test of Animal Bones

European Committee for Standardization (CEN), Three-point bending test machine

EN 12100:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports
EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
EN 13335:2002 Leather - Physical and Mechanical Tests - Determination of Flex Resistance by the Vamp Flex Method
DD ENV 658-5-1993 Advanced technical ceramics; mechanical properties of ceramic composites at room temperature; part 5: determination of shear strength by short span bend test (three-point)
PD CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
EN 658-5:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points)

Danish Standards Foundation, Three-point bending test machine

DS/EN 2746:1999 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
DS/EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method
DS/CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
DS/ENV 658-5:1993 Advanced technical ceramic. Mechanical properties of ceramic composites at room temperature. Part 5: Determination of shear strength by short span bend test (three-point)
DS/EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points)

Lithuanian Standards Office , Three-point bending test machine

LST EN 2746-2001 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
LST EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method (ISO 22288:2006)
LST EN 658-5-2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points)

Malaysia Standards, Three-point bending test machine

MS 1473-1999 Method of test for measuring the dynamic mechanical properties of plastics using three point bending

国家市场监督管理总局、中国国家标准化管理委员会, Three-point bending test machine

GB/T 38978-2020 Refractory products—Determination of stress-strain (three-point bending method）

Association Francaise de Normalisation, Three-point bending test machine

NF EN 1288-3:2000 Verre dans la construction - Détermination de la résistance du verre à la flexion - Partie 3 : essais avec éprouvettes supportées en deux points (flexion quatre points)
XP CEN/TS 15963:2014 Bitumes et liants bitumineux - Détermination de la température de résistance à la fissuration par un essai de flexion 3 points sur un barreau entaillé
NF G52-030:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method.
XP E25-046-2:2022 Fixations - Essais de résistance au dévissage/desserrage - Partie 2 : méthode d'essai par flexion alternée, dite " Hélicoptère "
XP T66-078*XP CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
NF EN 60512-16-3:2008 Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-3 : essais mécaniques des contacts et des sorties - Essai 16c : tenue des contacts au pliage
NF EN ISO 15744:2008 Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-3 : essais mécaniques des contacts et des sorties - Essai 16c : tenue des contacts au pliage
NF EN 15564:2008 Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-3 : essais mécaniques des contacts et des sorties - Essai 16c : tenue des contacts au pliage
NF EN ISO 32100:2018 Supports textiles revêtus de caoutchouc ou de plastique - Essais physiques et mécaniques - Détermination de la résistance à la flexion à l'aide d'un flexomètre
NF C93-400-16-3*NF EN 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3 : mechanical tests on contacts and terminations - Test 16c : contact-bending strength
NF P98-261-1:2001 Test relating to pavements - Determination of the fatigue resistance of bituminous mixtures - Part 1 : two points flexural fatigue test with constant displacement on trapezoidal isocel specimens.
NF EN 60512-16-14:2009 Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-14 : essais mécaniques des contacts et des sorties - Essai 16n : résistance à la flexion des languettes fixes
NF B43-205*NF EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5 : determination of interlaminar shear strength by short span bend test (three points).
NF EN 658-5:2003 Céramiques techniques avancées - Propriétés mécaniques des céramiques composites à température ambiante - Partie 5 : détermination de la résistance au cisaillement interlaminaire par essai de flexion sur appuis rapprochés (trois points)
NF C93-400-16-14*NF EN 60512-16-14:2009 Connectors for electronic equipment - Tests and measurements - Part 16-14 : mechanical tests on contacts and terminations - Test 16n : Bending strength, fixed male tabs

TR-TSE, Three-point bending test machine

TS 3284-1979 Flexnral Strength Of Concrete (Using Simple Beam With Third-Point Loading)

Taiwan Provincial Standard of the People's Republic of China, Three-point bending test machine

CNS 1233-1984 Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third-point Loading)

RU-GOST R, Three-point bending test machine

GOST 32281.3-2013 Glass and glass products. Determination of the bending strength. Test with specimen supported at two points (four points bending)

Japanese Industrial Standards Committee (JISC), Three-point bending test machine

JIS R 3111-3:2022 Glass in building -- Determination of the bending strength of glass -- Part 3: Test with specimen supported at two points (four-point bending)
JIS K 7084:1993 Testing method for impact properties of carbon fibre reinforced plastics by instrumented 3-point bending impact test

Society of Automotive Engineers (SAE), Three-point bending test machine

SAE J949-2009 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three Point Bending Test
SAE J949-2022 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three-Point Bending Test

KR-KS, Three-point bending test machine

KS M ISO 4666-2-2015 Rubber, vulcanized－Determination of temperature rise and resistance to fatigue in flexometer testing－Part 2：Rotary flexometer
KS M ISO 11093-6-2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS M ISO 2493-2-2022 Paper and board — Determination of bending resistance — Part 2: Taber-type tester

Professional Standard - Medicine, Three-point bending test machine

YY/T 0858-2011 Standard guide for three-piont bending of balloon expandable vascular stents and stent systems

International Organization for Standardization (ISO), Three-point bending test machine

ISO 1288-3:2016 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
ISO 22288:2006 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method
ISO 5402:2002 Leather - Physical and mechanical tests - Determination of flex resistance by flexometer method
ISO 23242:2020 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending

Korean Agency for Technology and Standards (KATS), Three-point bending test machine

KS M ISO 5402:2008 Leather-Physical and mechanical tests-Determination of flex resistance by flexometer method
KS M ISO 5402:2013 Leather－Physical and mechanical tests－Determination of flex resistance by flexometer method
KS M ISO 22288:2008 Leather-Physical and mechanical tests-Determination of flex resistance by the vamp flex method
KS M ISO 11093-6:2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS M ISO 11093-6:2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS F 2325-2002(2017) Testing method for flexural strength of soil－cement using simple beam with third point loading
KS M ISO 2493-2:2022 Paper and board — Determination of bending resistance — Part 2: Taber-type tester
KS M ISO 2493-2:2017 Paper and board - Determination of bending resistence-Part2:Taber-type tester
KS F 2325-2002(2022) Testing method for flexural strength of soil－cement using simple beam with third point loading

PL-PKN, Three-point bending test machine

PN C82055-02-1991 Test methods of pressed carbon products Determination of flexural strength by three-point method

European Association of Aerospace Industries, Three-point bending test machine

AECMA PREN 2591-D16-1992 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part D16 - Contact Bending Strength Issue P 1

YU-JUS, Three-point bending test machine

JUS N.R4.461-1990 Electromechanicai components for electronic equipment. Test methods. Test 16c: Contact bending strength

未注明发布机构, Three-point bending test machine

BS PD CEN TS 15963:2014 Bitumen and bituminous binders — Determination of the fracture toughness temperature by a three point bending test on a notched specimen

The American Road & Transportation Builders Association, Three-point bending test machine

AASHTO T 97-2010 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)

AASHTO - American Association of State Highway and Transportation Officials, Three-point bending test machine

T 97-2010 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
T 97-2003 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
TP19-1993 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) (Edition 1A)

Aerospace, Security and Defence Industries Association of Europe (ASD), Three-point bending test machine

ASD-STAN PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending (Edition P1)

AT-ON, Three-point bending test machine

ONORM ENV 658-5-1993 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of shear strength by short span bend test (three-point)

European Committee for Electrotechnical Standardization（CENELEC）, Three-point bending test machine

EN 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength
EN 60512-16-14:2008 Connectors for electronic equipment - Tests and measurements - Part 16-14: Mechanical tests on contacts and terminations - Test 16n: Bending strength, fixed male tabs

International Electrotechnical Commission (IEC), Three-point bending test machine

IEC 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength
IEC 61747-40-2:2015 Liquid crystal display devices - Part 40-2: Mechanical testing of display cover glass for mobile devices - Uni-axial flexural strength (4-point bend)
IEC 60512-16-14:2008 Connectors for electronic equipment - Tests and measurements - Part 16-14: Mechanical tests on contacts and terminations - Test 16n: Bending strength, fixed male tabs
IEC 60512-16-16:2008 Connectors for electronic equipment - Tests and measurements - Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength, fixed male tabs
IEC 62047-31:2019 Semiconductor devices - Micro-electromechanical devices - Part 31: Four-point bending test method for interfacial adhesion energy of layered MEMS materials

ES-UNE, Three-point bending test machine

UNE-EN 658-5:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points) (Endorsed by AENOR in February of 2003.)