ZH
RU
ES

How to use the viscometer

How to use the viscometer, Total:75 items.

In the international standard classification, How to use the viscometer involves: Waxes, bituminous materials and other petroleum products, Construction materials, Measurement of volume, mass, density, viscosity, Plastics, Rubber and plastics products, Rubber, Paints and varnishes, Petroleum products in general, Mechanical testing, Road engineering, Cereals, pulses and derived products, Structures of buildings, Lubricants, industrial oils and related products, Fuels.

HU-MSZT, How to use the viscometer

MSZ 7847-1962

Association Francaise de Normalisation, How to use the viscometer

NF T66-056:2010 Bitumen and bituminous binders - Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus.
NF EN ISO 7973:2016 Céréales et produits de mouture des céréales - Détermination de la viscosité de la farine - Méthode utilisant un amylographe
NF T51-710:1986 Plastics. Polyvinyl chloride pastes. Determination of apparent viscosity using the severs rheometer.
NF EN 17643:2022 Bitumes et liants bitumineux - Détermination de la température d'équi-module de rigidité et de l'angle de phase à l'aide d'un rhéomètre à cisaillement dynamique (DSR) - Essai BTSV

American Society for Testing and Materials (ASTM), How to use the viscometer

ASTM D7042-11a Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D4541-09 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM D664-09 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D664-11ae1 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D6648-08(2016) Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
ASTM D6648-08 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
ASTM D664-18e2 Test Method for Determination of Flexible Creep Hardness of Asphalt Binders Using a Bending Beam Rheometer
ASTM D6648-01 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
ASTM D7234-19 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
ASTM D7417-17 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
ASTM D7417-10 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)

International Organization for Standardization (ISO), How to use the viscometer

ISO 4575:1978 Plastics — Polyvinyl chloride pastes — Determination of apparent viscosity using the Severs rheometer
ISO/FDIS 13145:2023 Rubber — Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer
ISO 13145:2023 Rubber — Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer
ISO 4575:2007 Plastics - Poly(vinyl chloride) pastes - Determination of apparent viscosity using the Severs rheometer
ISO 6721-10:1999 Plastics - Determination of dynamic mechanical properties - Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
ISO 6721-10:2015 Plastics - Determination of dynamic mechanical properties - Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
ISO/CD 6721-10:2023 Plastics — Determination of dynamic mechanical properties — Part 10: Complex shear viscosity using a parallel-plate and a cone-and-plate oscillatory rheometer

British Standards Institution (BSI), How to use the viscometer

BS EN 13302:2010 Bitumen and bituminous binders - Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus
BS EN 13302:2018*BS 2000-505:2018 Bitumen and bituminous binders - Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus
BS ISO 13145:2023 Rubber. Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer
DD CEN/TS 15324:2008 Bitumen and bituminous binders. Determination of equiviscous temperature based on low shear viscosity using a dynamic shear rheometer in low frequency oscillation mode
BS ISO 4575:2007 Plastics - Poly(vinyl chloride) pastes - Determination of apparent viscosity using the Severs rheometer
DD CEN/TS 15325:2008 Bitumen and bituminous binders. Determination of zero-shear viscosity (ZSV) using a shear stress rheometer in creep mode
BS EN ISO 7973:2015 Cereals and milled cereal products. Determination of the viscosity of flour. Method using an amylograph
BS ISO 6721-10:2001 Plastics - Determination of dynamic mechanical properties - Complex shear viscosity using a parallel-plate oscillatory rheometer
BS DD CEN/TS 15325:2008 Bitumen and bituminous binders - Determination of zero-shear viscosity (ZSV) using a shear stress rheometer in creep mode
BS EN 17643:2022 Bitumen and bituminous binders. Determination of equi-shear modulus temperature and phase angle using a Dynamic Shear Rheometer (DSR). BTSV test
BS ISO 6721-10:2015 Tracked Changes. Plastics. Determination of dynamic mechanical properties. Complex shear viscosity using a parallel-plate oscillatory rheometer
21/30423946 DC BS EN 17643. Bitumen and bituminous binders. Determination of equi-shear modulus temperature using a Dynamic Shear Rheometer (DSR). BTSV test

AENOR, How to use the viscometer

UNE-ISO 4575:2014 Plastics. Poly(vinyl chloride) pastes. Determination of apparent viscosity using the Severs rheometer

German Institute for Standardization, How to use the viscometer

DIN EN 13302:2010 Bitumen and bituminous binders - Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus; German version EN 13302:2010
DIN EN ISO 7973:2016-03 Cereals and milled cereal products - Determination of the viscosity of flour - Method using an amylograph (ISO 7973:1992); German version EN ISO 7973:2015
DIN EN ISO 7973:2016 Cereals and milled cereal products - Determination of the viscosity of flour - Method using an amylograph (ISO 7973:1992)
DIN CEN/TS 15325:2008 Bitumen and bituminous binders - Determination of Zero-Shear Viscosity (ZSV) using a Shear Stress Rheometer in creep mode; German version CEN/TS 15325:2008
DIN EN 17643:2022-09 Bitumen and bituminous binders - Determination of equi-shear modulus temperature and phase angle using a Dynamic Shear Rheometer (DSR) - BTSV test; German version EN 17643:2022

Danish Standards Foundation, How to use the viscometer

DS/CEN/TS 15324:2008 Bitumen and bituminous binders - Determination of equiviscous temperature based on Low Shear Viscosity using a Dynamic Shear Rheometer in low frequency oscillation mode
DS/CEN/TS 15325:2008 Bitumen and bituminous binders - Determination of Zero-Shear Viscosity (ZSV) using a Shear Stress Rheometer in creep mode

The American Road & Transportation Builders Association, How to use the viscometer

AASHTO TP 85-2010 Standard Method of Test for Apparent Viscosity of Hot-Poured Bituminous Crack Sealant Using Brookfield Rotational Viscometer RV Series Instrument
AASHTO T 313-2010 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
AASHTO T 313-2002 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR) HM-22; Part IIB; Formaly AASHTO TP 1

AASHTO - American Association of State Highway and Transportation Officials, How to use the viscometer

TP 85-2010 Standard Method of Test for Apparent Viscosity of Hot-Poured Bituminous Crack Sealant Using Brookfield Rotational Viscometer RV Series Instrument (Revision 1)
T 313-2009 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2004 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2010 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2003 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2008 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
TP1-1998 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
TP1-1997 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2006 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2005 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2012 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
TP1-1993 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR) (Edition 1B)
T 313-2002 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR) (HM-22; Part IIB; Formaly AASHTO TP 1)

IN-BIS, How to use the viscometer

IS 13863-1993 Cereals and milled cereal products. Determination of the viscosity of flour. Method using an amylograph

ES-UNE, How to use the viscometer

UNE-EN ISO 7973:2016 Cereals and milled cereal products - Determination of the viscosity of flour - Method using an amylograph (ISO 7973:1992)
UNE-EN 17643:2023 Bitumen and bituminous binders - Determination of equi-shear modulus temperature and phase angle using a dynamic shear rheometer (DSR) - BTSV test

YU-JUS, How to use the viscometer

JUS K.F0.005-1989 Gralns of fused alumiuium oxide and silicon carbide for boodod abrasivc products. Particle si?e measurement of microgrfts by Eppendorf - photosedimentometer

Lithuanian Standards Office , How to use the viscometer

LST ISO 7973:2006 Cereals and milled cereal products - Determination of the viscosity of flour - Method using an amylograph (idt ISO 7973:1992)

AT-ON, How to use the viscometer

OENORM EN 17643-2021 Bitumen and bituminous binders - Determination of equi-shear modulus temperature using a Dynamic Shear Rheometer (DSR) - BTSV test

European Committee for Standardization (CEN), How to use the viscometer

prEN 17643-2021 Bitumen and bituminous binders - Determination of equi-shear modulus temperature using a Dynamic Shear Rheometer (DSR) - BTSV test
PD CEN/TS 15325:2008 Bitumen and bituminous binders - Determination of Zero-Shear Viscosity (ZSV) using a Shear Stress Rheometer in creep mode

RU-GOST R, How to use the viscometer

PNST 79-2016 Automobile roads of general use. Viscous petroleum road bitumens. The method determining of the flexural creep stiffness using the bending beam rheometer (BBR)

GOSTR, How to use the viscometer

GOST R 58400.8-2019 Automobile roads of general use. Petroleum-based bitumen binders. Method of determining the flexural creep stiffness at subzero temperatures using the bending beam rheometer (BBR)

Korean Agency for Technology and Standards (KATS), How to use the viscometer

KS M ISO 6721-10:2003 Plastics-Determination of dynamic mechanical properties-Part 10:Complex shear viscosity using a parallel plate oscillatory rheometer
KS M ISO 6721-10:2016 Plastics－Determination of dynamic mechanical properties－Part 10：Complex shear viscosity using a parallel plate oscillatory rheometer

Professional Standard - Energy, How to use the viscometer

NB/SH/T 0940-2016 Test method for the analysis of in-use lubricants using a specific 4-in-1 tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity and Laser Particle Counter)

国家能源局, How to use the viscometer

SH/T 0940-2016 Test methods for analyzing in-service lubricants using specific four-in-one testers (atomic emission spectrometry, infrared spectroscopy, viscosity and laser particle counter)

NZ-SNZ, How to use the viscometer

NZS 4402.6.3.1:1986 Methods of Testing Soils for Civil Engineering Purposes Part 6.3: Soil Strength Tests - Determination of the Unconfined Compressive Strength of Cohesive Soil Test 6.3.1: Standard Method Using Laboratory Apparatus
NZS 4402.6.3.2:1986 Methods of Testing Soils for Civil Engineering Purposes Part 6.3: Soil Strength Tests - Determination of the Unconfined Compressive Strength of Cohesive Soil Test 6.3.2: Alternative Method Using Autographic Apparatus