ZH
RU
ES

Fast viscometer use

Fast viscometer use, Total:163 items.

In the international standard classification, Fast viscometer use involves: Cereals, pulses and derived products, Farming and forestry, Thermodynamics and temperature measurements, Paints and varnishes, Waxes, bituminous materials and other petroleum products, Construction materials, Measurement of volume, mass, density, viscosity, Adhesives, Measurement of fluid flow, Plastics, Rubber and plastics products, Lubricants, industrial oils and related products, Rubber, Industrial automation systems, Petroleum products in general, Mechanical testing, Road engineering, Vibrations, shock and vibration measurements, Analytical chemistry, Structures of buildings.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Fast viscometer use

GB/T 24852-2010 Determination of the pasting properties of rice-Rapid visco analyzer method
GB/T 24853-2010 General pasting method for wheat or rye flour or starch-Using the rapid visco analyzer
GB/T 19146-2003 General requirements for infrared devices for instant screening of human skin temperature

Professional Standard - Grain, Fast viscometer use

LS/T 6101-2002 Determination of pasting properties of cereals (rapid viscosity analyzer method)

农业农村部, Fast viscometer use

NY/T 3868-2021 Rapid viscometer method for determination of gelatinization properties of corn and corn starch

Military Standard of the People's Republic of China-General Armament Department, Fast viscometer use

GJB 6748.5-2009 Rapid determination of quality for POL for motor vehicle.Part 5:Diesel-Rapid determination of viscosity
GJB 6748.6-2009 Rapid determination of quality for POL for motor vehicle.Part 6:Lubricant-Rapid determination of viscosity-falling ball method

(U.S.) Ford Automotive Standards, Fast viscometer use

FORD WSB-M2G316-B-2007 ADHESIVE, FAST MOISTURE CURING URETHANE, ONE COMPONENT, HIGH VISCOSITY ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2G409-A-2002 ADHESIVE, STRUCTURAL, FAST CURING, AIR DRY ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M2G176-A-2014 ADHESIVE, STRUCTURAL - FAST CURING - AIR DRY ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M2G176-A-2003 ADHESIVE, STRUCTURAL - FAST CURING - AIR DRY ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M2G112-A-2003 ADHESIVE, NITRILE BASE - FAST TACK - SOLVENT RELEASE TYPE - MEDIUM VISCOSITY ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD SK-M2G9518-A-2003 ADHESIVE, CYANOACRYLATE BASE, FAST CURING ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M2G113-A-2003 ADHESIVE, NITRILE BASE - FAST TACK - SOLVENT RELEASE TYPE - LOW VISCOSITY ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on ESB-M2G112-A
FORD WSB-M2G234-C-2007 PRIMER, METAL, FOR ONE COMPONENT FASTER MOISTURE CURING URETHANE ADHESIVE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2C949-A-2014 FLUID, ULTRA LOW VISCOSITY (ULV) AUTOMATIC TRANSMISSION ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M11P57-A3-2009 PERFORMANCE, STRUCT, ADHESIVE; 1 COMP., PUR; FAST FIX ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M11P57-A1)
FORD WSS-M2G316-B6-2013 ADHESIVE, POLYURETHANE, ONE COMPONENT, HIGH SHEAR MODULUS, FAST FIX, LOW-CONDUCTIVE, AMBIENT PUMPABLE, WARM APPLIED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2G316-B6-2009 ADHESIVE, POLYURETHANE, ONE COMPONENT, HIGH SHEAR MODULUS, FAST FIX, LOW-CONDUCTIVE, AMBIENT PUMPABLE, WARM APPLIED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M2G379-A1-2009 ADHESIVE, POLYURETHANE, ONE COMPONENT, HIGH SHEAR MODULUS, FAST FIX, LOW-CONDUCTIVE, AMBIENT PUMPABLE, WARM APPLIED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M2G234-C2-2007 PRIMER, METAL, FOR ONE COMPONENT FASTER MOISTURE CURING URETHANE ADHESIVE - SILANE BASED CLEARCOAT CHEMISTRIES ONLY -- ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M2G379-A6-2008 ADHESIVE, POLYURETHANE, ONE COMPONENT, HIGH SHEAR MODULUS, FAST FIX, LOW-CONDUCTIVE, AMBIENT PUMPABLE, WARM APPLIED ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSK-M2G379-A1
FORD WSK-M2G379-A6-2009 ADHESIVE, POLYURETHANE, ONE COMPONENT, HIGH SHEAR MODULUS, FAST FIX, LOW-CONDUCTIVE, AMBIENT PUMPABLE, WARM APPLIED ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G379-A1)

HU-MSZT, Fast viscometer use

MSZ 7847-1962

British Standards Institution (BSI), Fast viscometer use

BS EN ISO 2884-1:2006 Paints and varnishes. Determination of viscosity using rotary viscometers. Cone-and-plate viscometer operated at a high rate of shear
BS EN ISO 2884-2:2006 Paints and varnishes. Determination of viscosity using rotary viscometers. Disc or ball viscometer operated at a specified speed
BS EN 13302:2010 Bitumen and bituminous binders - Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus
BS EN 13302:2018*BS 2000-505:2018 Bitumen and bituminous binders - Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus
BS EN 13999-3:2007 Adhesives — Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application — Part 3: Determination of volatile aldehydes
BS EN 13999-3:2007+A1:2009 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3:Determination of volatile aldehydes
BS EN 13999-2:2013 Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application. Determination of volatile organic compounds
BS EN 13999-4:2007 Adhesives — Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application — Part 4: Determination of volatile diisocyanates
BS EN 13999-2:2007 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Determination of volatile organic compounds
BS EN 13999-4:2007+A1:2009 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 4:Determination of volatile diisocyanates
BS ISO 13145:2023 Rubber. Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer
DD CEN/TS 15324:2008 Bitumen and bituminous binders. Determination of equiviscous temperature based on low shear viscosity using a dynamic shear rheometer in low frequency oscillation mode
BS ISO 4575:2007 Plastics - Poly(vinyl chloride) pastes - Determination of apparent viscosity using the Severs rheometer
DD CEN/TS 15325:2008 Bitumen and bituminous binders. Determination of zero-shear viscosity (ZSV) using a shear stress rheometer in creep mode
BS EN ISO 7973:2015 Cereals and milled cereal products. Determination of the viscosity of flour. Method using an amylograph
BS ISO 6721-10:2001 Plastics - Determination of dynamic mechanical properties - Complex shear viscosity using a parallel-plate oscillatory rheometer
BS DD CEN/TS 15325:2008 Bitumen and bituminous binders - Determination of zero-shear viscosity (ZSV) using a shear stress rheometer in creep mode
PD ISO/TR 22335:2007 Surface chemical analysis. Depth profiling. Measurement of sputtering rate. Mesh-replica method using a mechanical stylus profilometer
BS EN 17643:2022 Bitumen and bituminous binders. Determination of equi-shear modulus temperature and phase angle using a Dynamic Shear Rheometer (DSR). BTSV test
BS ISO 6721-10:2015 Tracked Changes. Plastics. Determination of dynamic mechanical properties. Complex shear viscosity using a parallel-plate oscillatory rheometer
21/30423946 DC BS EN 17643. Bitumen and bituminous binders. Determination of equi-shear modulus temperature using a Dynamic Shear Rheometer (DSR). BTSV test

International Organization for Standardization (ISO), Fast viscometer use

ISO/DIS 2884-2:2023 Paints and varnishes — Determination of viscosity using rotational viscometers — Part 2: Relative measurement of viscosity using disc or ball spindles at specified speeds
ISO/DIS 2884-1:2023 Paints and varnishes — Determination of viscosity using rotational viscometers — Part 1: Absolute viscosity measurement with cone-plate measuring geometry at high shear rates
ISO/CD 2884-2:2023 Paints and varnishes — Determination of viscosity using rotary viscometers — Part 2: Disc or ball viscometer operated at a specified speed
ISO/CD 2884-1:2023 Paints and varnishes — Determination of viscosity using rotary viscometers — Part 1: Cone-and-plate viscometer operated at a high rate of shear
ISO 4575:1978 Plastics — Polyvinyl chloride pastes — Determination of apparent viscosity using the Severs rheometer
ISO 4575:1985 Plastics; Polyvinyl chloride pastes; Determination of apparent viscosity using the Severs rheometer
ISO/FDIS 13145:2023 Rubber — Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer
ISO 13145:2023 Rubber — Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer
ISO 4575:2007 Plastics - Poly(vinyl chloride) pastes - Determination of apparent viscosity using the Severs rheometer
ISO 6721-10:1999 Plastics - Determination of dynamic mechanical properties - Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
ISO 6721-10:2015 Plastics - Determination of dynamic mechanical properties - Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
ISO/TR 22335:2007 Surface chemical analysis - Depth profiling - Measurement of sputtering rate: mesh-replica method using a mechanical stylus profilometer

Association Francaise de Normalisation, Fast viscometer use

NF T66-056:2010 Bitumen and bituminous binders - Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus.
NF EN ISO 7973:2016 Céréales et produits de mouture des céréales - Détermination de la viscosité de la farine - Méthode utilisant un amylographe
NF T76-140-1:2006 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1 : general procedure.
NF EN ISO 2884-2:2006 Peintures et vernis - Détermination de la viscosité au moyen de viscosimètres rotatifs - Partie 2 : viscosimètre à disque ou à bille fonctionnant à vitesse spécifiée
NF EN ISO 2884-1:2006 Peintures et vernis - Détermination de la viscosité au moyen de viscosimètres rotatifs - Partie 1 : viscosimètre à cône et plateau fonctionnant à gradient de vitesse de cisaillement élevé
NF T51-710:1986 Plastics. Polyvinyl chloride pastes. Determination of apparent viscosity using the severs rheometer.
NF ISO 8760:1990 Air des lieux de travail - Détermination de la concentration en masse du monoxyde de carbone - Méthode utilisant des tubes détecteurs pour échantillonnage rapide à lecture directe.
NF ISO 8761:1990 Air des lieux de travail - Détermination de la concentration en masse du dioxyde d'azote - Méthode utilisant des tubes détecteurs pour échantillonnage rapide à lecture directe.
NF EN ISO 13196:2015 Qualité du sol - Analyse rapide d'une sélection d'éléments dans les sols à l'aide d'un spectromètre de fluorescence X à dispersion d'énergie portable ou portatif
NF EN 17643:2022 Bitumes et liants bitumineux - Détermination de la température d'équi-module de rigidité et de l'angle de phase à l'aide d'un rhéomètre à cisaillement dynamique (DSR) - Essai BTSV
FD ISO/TR 22335:2008 Analyse chimique des surfaces - Profilage en profondeur - Mesurage de la vitesse de pulvérisation : méthode par empreinte de grille au moyen d'un profilomètre à stylet mécanique

American Society for Testing and Materials (ASTM), Fast viscometer use

ASTM D7042-11a Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D3464-96(2014) Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer
ASTM D2556-14(2018) Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties Using Rotational Viscometry
ASTM D2983-22 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
ASTM D2983-19e1 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
ASTM D2983-17 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
ASTM D2983-19 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
ASTM D2983-16 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
ASTM D2983-20 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
ASTM D2983-21 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
ASTM D4541-09 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM D664-09 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D664-11ae1 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D6648-08(2016) Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
ASTM D6648-08 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
ASTM D664-18e2 Test Method for Determination of Flexible Creep Hardness of Asphalt Binders Using a Bending Beam Rheometer
ASTM D5133-99 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM D5133-19 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM D5133-20 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM D5133-20a Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM D5133-15 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM D6648-01 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
ASTM D7234-19 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
ASTM D7370-08 Standard Test Method for Determination of Relative Density and Absorption of Fine, Coarse and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion
ASTM D7370/D7370M-14(2021) Standard Test Method for Determination of Relative Density and Absorption of Fine, Coarse, and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion

European Committee for Standardization (CEN), Fast viscometer use

EN 13999-1:2013 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1: General procedure
prEN ISO 2884-2 rev Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed
EN 13999-2:2013 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2: Determination of volatile organic compounds
EN 13999-3:2007 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3: Determination of volatile aldehydes (Incorporates Amendment A1: 2009)
EN 13999-4:2007 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 4: Determination of volatile diisocyanates (Incorporates Amendment A1: 2009)
prEN 17643-2021 Bitumen and bituminous binders - Determination of equi-shear modulus temperature using a Dynamic Shear Rheometer (DSR) - BTSV test
PD CEN/TS 15325:2008 Bitumen and bituminous binders - Determination of Zero-Shear Viscosity (ZSV) using a Shear Stress Rheometer in creep mode

CEN - European Committee for Standardization, Fast viscometer use

EN 13999-1:2006 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1: General procedure
EN 13999-2:2007 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2: Determination of volatile organic compounds

German Institute for Standardization, Fast viscometer use

DIN EN 13999-1:2006 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1: General procedure; English version of DIN EN 13999-1:2006-11
DIN EN ISO 2884-2:2006-09 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed (ISO 2884-2:2003); German version EN ISO 2884-2:2006 / Note: To be replaced by DIN EN ISO 3219-2 (2020-02).
DIN EN ISO 2884-1:2006-09 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 1: Cone-and-plate viscometer operated at a high rate of shear (ISO 2884-1:1999); German version EN ISO 2884-1:2006 / Note: To be replaced by DIN EN ISO 3219-2 (2020-02).
DIN EN 13302:2010 Bitumen and bituminous binders - Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus; German version EN 13302:2010
DIN EN 13999-1:2014 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1: General procedure; German version EN 13999-1:2013
DIN EN ISO 2884-2:2023-09 Paints and varnishes - Determination of viscosity using rotational viscometers - Part 2: Relative measurement of viscosity using disc or ball spindles at specified speeds (ISO/DIS 2884-2:2023); German and English version prEN ISO 2884-2:2023 / Note: Da...
DIN EN ISO 2884-1:2023-09 Paints and varnishes - Determination of viscosity using rotational viscometers - Part 1: Absolute viscosity measurement with cone-plate measuring geometry at high shear rates (ISO/DIS 2884-1:2023); German and English version prEN ISO 2884-1:2023 / Note...
DIN EN ISO 7973:2016-03 Cereals and milled cereal products - Determination of the viscosity of flour - Method using an amylograph (ISO 7973:1992); German version EN ISO 7973:2015
DIN EN ISO 7973:2016 Cereals and milled cereal products - Determination of the viscosity of flour - Method using an amylograph (ISO 7973:1992)
DIN CEN/TS 15325:2008 Bitumen and bituminous binders - Determination of Zero-Shear Viscosity (ZSV) using a Shear Stress Rheometer in creep mode; German version CEN/TS 15325:2008
DIN EN 17643:2022-09 Bitumen and bituminous binders - Determination of equi-shear modulus temperature and phase angle using a Dynamic Shear Rheometer (DSR) - BTSV test; German version EN 17643:2022

Danish Standards Foundation, Fast viscometer use

DS/EN ISO 2884-1:2006 Paints and varnishes – Determination of viscosity using rotary viscometers – Part 1: Cone-and-plate viscometer operated at a high rate of shear
DS/EN ISO 2884-2:2006 Paints and varnishes – Determination of viscosity using rotary viscometers – Part 2: Disc or ball viscometer operated at a specified speed
DS/CEN/TS 15324:2008 Bitumen and bituminous binders - Determination of equiviscous temperature based on Low Shear Viscosity using a Dynamic Shear Rheometer in low frequency oscillation mode
DS/CEN/TS 15325:2008 Bitumen and bituminous binders - Determination of Zero-Shear Viscosity (ZSV) using a Shear Stress Rheometer in creep mode

Korean Agency for Technology and Standards (KATS), Fast viscometer use

KS M ISO 2884-1:2022 Paints and varnishes — Determination of viscosity using rotary viscometers — Part 1: Cone-and-plate viscometer operated at a high rate of shear
KS M ISO 2884-1:2007 Paints and varnishes-Determination of viscosity using rotary viscometers-Part 1:Cone-and-plate viscometer operated at a high rate of shear
KS M ISO 6721-10:2003 Plastics-Determination of dynamic mechanical properties-Part 10:Complex shear viscosity using a parallel plate oscillatory rheometer
KS M ISO 6721-10:2016 Plastics－Determination of dynamic mechanical properties－Part 10：Complex shear viscosity using a parallel plate oscillatory rheometer

KR-KS, Fast viscometer use

KS M ISO 2884-1-2022 Paints and varnishes — Determination of viscosity using rotary viscometers — Part 1: Cone-and-plate viscometer operated at a high rate of shear
KS B ISO 16063-42-2017 Methods for the calibration of vibration and shock transducers — Part 42: Calibration of seismometers with high accuracy using acceleration of gravity

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Fast viscometer use

ASHRAE CI-01-1-2-2001 Measurement of Two-Dimensional Air Velocities in a Full-Scale Room Using Particle Image Velocimetry
ASHRAE SF-98-9-4-1998 Case Study: Seven-System Analysis of Thermal Comfort and Energy Use for a Fast-Acting Radiant Heating System

SE-SIS, Fast viscometer use

SIS SS-ISO 4575:1987 Plastics - Polyvinyl chloride pastes - Determination of apparent viscosity using the Severs rheometer

AENOR, Fast viscometer use

UNE-ISO 4575:2014 Plastics. Poly(vinyl chloride) pastes. Determination of apparent viscosity using the Severs rheometer
UNE-EN ISO 2884-2:2007 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed (ISO 2884-2:2003)
UNE 57152-2:1990 PAPER AND BOARD. DETERMINATION OF RESISTANCE TO PICKING. ACCELERATING SPEED METHOD USING THE IGT TESTER. (PENDULUM OR SPRING MODEL)

Lithuanian Standards Office , Fast viscometer use

LST EN ISO 2884-2:2006 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed (ISO 2884-2:2003)
LST ISO 7973:2006 Cereals and milled cereal products - Determination of the viscosity of flour - Method using an amylograph (idt ISO 7973:1992)

TR-TSE, Fast viscometer use

TS 1970-1975 COMPOUNDED RUBBER — DETERMINATION OF RATE OF CURE USING THE SHEARING D?SK VISCOMETER
TS 3424-1979 PLASTICS-POLYVINYL CHLORIDE PASTES-DETERMINATION OF APPARENT VISCOSITY USING THE SEVERS RHEOMETER

SAE - SAE International, Fast viscometer use

SAE AMS3277A-1999 Sealing Compound@ Polythioether Integral Fuel Tanks and General Purpose@ Fast Curing Intermittent Use to 360 Degrees F (182 Degrees C)
SAE AMS3277-1995 Sealing Compound@ Polythioether Integral Fuel Tanks and General Purpose@ Fast Curing Intermittent Use to 360 Degrees F (182 Degrees C)

The American Road & Transportation Builders Association, Fast viscometer use

AASHTO TP 85-2010 Standard Method of Test for Apparent Viscosity of Hot-Poured Bituminous Crack Sealant Using Brookfield Rotational Viscometer RV Series Instrument
AASHTO T 313-2010 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)

ES-UNE, Fast viscometer use

UNE-EN 3475-415:2005 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 415: Rapid change of temperature (Endorsed by AENOR in December of 2005.)
UNE-EN ISO 7973:2016 Cereals and milled cereal products - Determination of the viscosity of flour - Method using an amylograph (ISO 7973:1992)
UNE-EN 17643:2023 Bitumen and bituminous binders - Determination of equi-shear modulus temperature and phase angle using a dynamic shear rheometer (DSR) - BTSV test

IN-BIS, Fast viscometer use

IS 11276-1985
IS 13863-1993 Cereals and milled cereal products. Determination of the viscosity of flour. Method using an amylograph

Professional Standard - Machinery, Fast viscometer use

JB/T 6239.5-2007 General methods for testing the performance of industrial process measurement and control instruments Part 5: Electrical power supply fast transient/pulse immunity test

Canadian General Standards Board （CGSB), Fast viscometer use

CGSB 9.0 NO. 4-92-CAN/CGSB-1992 Methodes D'Essai Des Pates Et Du Papier Comportement A La Traction Des Papiers Et Cartons (A L'Aide D'Un Appareil A Vitesse Constante D'Allongement)

AASHTO - American Association of State Highway and Transportation Officials, Fast viscometer use

TP 85-2010 Standard Method of Test for Apparent Viscosity of Hot-Poured Bituminous Crack Sealant Using Brookfield Rotational Viscometer RV Series Instrument (Revision 1)
T 313-2009 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2004 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2010 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2003 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2008 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
TP1-1998 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
TP1-1997 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2006 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2005 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2012 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
TP1-1993 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR) (Edition 1B)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Fast viscometer use

PREN 3475-415-2002 Aerospace Series Cables@ Electrical@ Aircraft Use Test Methods Part 415: Rapid Change of Temperature (Edition P 2)

YU-JUS, Fast viscometer use

JUS K.F0.005-1989 Gralns of fused alumiuium oxide and silicon carbide for boodod abrasivc products. Particle si?e measurement of microgrfts by Eppendorf - photosedimentometer

AT-ON, Fast viscometer use

OENORM EN 17643-2021 Bitumen and bituminous binders - Determination of equi-shear modulus temperature using a Dynamic Shear Rheometer (DSR) - BTSV test

ESDU - Engineering Sciences Data Unit, Fast viscometer use

ESDU 91016-1991 Energy height method for flight path optimisation. Addendum A: numerical method suitable for rapid use on IBM PC compatible computers.

RU-GOST R, Fast viscometer use

PNST 79-2016 Automobile roads of general use. Viscous petroleum road bitumens. The method determining of the flexural creep stiffness using the bending beam rheometer (BBR)
GOST R 55421-2013 General use highways. Emulsion bitumen road cationic. Method for determination of apparent viscosity

GOSTR, Fast viscometer use

GOST R 58400.8-2019 Automobile roads of general use. Petroleum-based bitumen binders. Method of determining the flexural creep stiffness at subzero temperatures using the bending beam rheometer (BBR)