ZH
RU
ES
Polycarbonate (PC)
Polycarbonate (PC), Total:143 items.
In the international standard classification, Polycarbonate (PC) involves: Elements of buildings, Bottles. Pots. Jars, Beverages, Rubber and plastics products, Manufacturing processes in the rubber and plastics industries, Vocabularies, Plastics, Raw materials for rubber and plastics, Materials and articles in contact with foodstuffs, Insulating materials.
Professional Standard - Construction Industry, Polycarbonate (PC)
Group Standards of the People's Republic of China, Polycarbonate (PC)
- T/JSBIA 002-2021 Polycarbonate (PC) drinking water tank
- T/JSBIA 003-2021 Seaiing cover of drinking water tank
- T/FSNZ 12-2021 Polycarbonate (PC) board production technical regulations
- T/WS 0003-2021 Polycarbonate (PC) recycled materials for housing of household appliances
- T/ZZB 1815-2020 Plastics-Regeneration modified Polycarbonate (PC) compound for automobile accessories
- T/GDPIA 50-2022 Flame retardant Polycarbonate（PC）material for automobile charging piles
- T/GDPIA 64-2023 Post-consumer recycled polycarbonate (PC -PCR) special material for automotive interiors
Professional Standard - Light Industry, Polycarbonate (PC)
国家市场监督管理总局、中国国家标准化管理委员会, Polycarbonate (PC)
- GB/T 41000-2021 General requirement of polycarbonate (PC) drinking water pitcher
- GB/T 40006.7-2021 Plastics—Recycled plastics—Part 7: Polycarbonate(PC) materials
- GB/T 1632.4-2020 Plastics—Determination of the viscosity of polymers in dilute solution using capillary viscometers—Part 4:Polycarbonate(PC) moulding and extrusion materials
GM North America, Polycarbonate (PC)
- GM 9984277-2004 Interior Paint for Polycarbonate (PC) (Replaced By GMN10084)
Professional Standard - Chemical Industry, Polycarbonate (PC)
- HG/T 3020-1999 Polycarbonate(PC) moulding and extrusion materials.Designation system
GM Europe, Polycarbonate (PC)
Anhui Provincial Standard of the People's Republic of China, Polycarbonate (PC)
- DB34/T 1790-2012 Polycarbonate (PC) Drinking Water Bucket Material Identification Technical Regulations
(U.S.) Ford Automotive Standards, Polycarbonate (PC)
- FORD WSS-M4D1053-A1-2014 POLYCARBONATE (PC) COPOLYMER, HIGH HEAT RESISTANCE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESF-M4D100-A1-2005 POLYCARBONATE (PC), GENERAL PURPOSE GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D1051-A1-2014 POLYCARBONATE (PC), GENERAL PURPOSE, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M4D775-A1-2014 POLYCARBONATE (PC), MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M4D100-C1-2005 POLYCARBONATE (PC), LOW TEMPERATURE IMPACT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M4D442-A3-1986 PC/PBT ALLOY, RUBBER MODIFIED MOLDING COMPOUND - PAINTABLE
- FORD WSS-M4D1052-A1-2013 POLYCARBONATE (PC), OPTICAL GRADE, HIGH MELT FLOW, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSB-M4D926-A-2006 POLYCARBONATE (PC), POST CONSUMER RECYCLATE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D1051-A2-2014 POLYCARBONATE (PC), GENERAL PURPOSE, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M4D1051-A1)
- FORD WSS-M4D309-C-2009 POLYCARBONATE (PC), 10% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M4D100-A3-2005 POLYCARBONATE (PC), OPTICAL GRADE - UNCOATED ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on ESF-M4D100-A1
- FORD WSS-M4D1053-A2-2014 POLYCARBONATE (PC) COPOLYMER, HIGH HEAT RESISTANCE, HIGH HDT ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M4D1053-A1)
- FORD WSD-M2D386-A2-2009 SILICONE RUBBER (MQ), SELF-LUBRICATED POLYCARBONATE (PC) COMPATIBLE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M4D100-A2-2005 POLYCARBONATE (PC), OPTICAL GRADE - COATED ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on ESF-M4D100-A1
- FORD WSB-M4D627-A-2005 POLYCARBONATE (PC) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** REPLACES SL-M4D9656-A
- FORD ESF-M4D100-A1-2010 POLYCARBONATE (PC), GENERAL PURPOSE GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSB-M4D627-A-2010 POLYCARBONATE (PC) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M4D718-A-2010 POLYCARBONATE (PC) FILM, TRANSLUCENT ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D627-A2-2010 POLYCARBONATE (PC) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M4D100-C1-2010 POLYCARBONATE (PC), LOW TEMPERATURE IMPACT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D1052-A2-2013 POLYCARBONATE (PC), OPTICAL GRADE, LOW MELT FLOW, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M4D1052-A1)
- FORD WSS-M4D1052-A3-2013 POLYCARBONATE (PC), OPTICAL GRADE, LOW MELT FLOW, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M4D1052-A1)
- FORD WSK-M4D775-A2-2014 POLYCARBONATE (PC), MOLDING COMPOUND, OPTICAL GRADE, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M4D775-A1)
- FORD WSB-M4D922-A-2006 POLYCARBONATE (PC), 10% GLASS FIBER REINFORCED, POST CONSUMER RECYCLATE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSF-M4D718-A3-2010 POLYCARBONATE (PC) FILM, CLEAR AND TRANSLUCENT ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M28P1-B6-2012 POLYCARBONATE (PC) COATED, FOR SIDE GLAZING AND BACKLITES ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M28P1-B1
- FORD WSS-M28P1-B7-2012 POLYCARBONATE (PC) COATED, FOR ALL OTHER GLAZING APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M28P1-B1
- FORD WSS-M28P1-B7-2015 POLYCARBONATE (PC) COATED, FOR ALL OTHER GLAZING APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M28P1-B1)
- FORD WSB-M4D926-A-2010 POLYCARBONATE (PC), POST CONSUMER RECYCLATE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M28P1-B6-2015 POLYCARBONATE (PC) COATED, FOR SIDE GLAZING AND BACKLITES ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M28P1-B1)
- FORD WSK-M4D796-A1-2010 POLYCARBONATE (PC), MODIFIED, HIGH HEAT RESISTANT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M4D796-A2-2010 POLYCARBONATE (PC), MODIFIED, HIGH HEAT RESISTANT MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
German Institute for Standardization, Polycarbonate (PC)
- DIN 29880:1989-11 Aerospace; polycarbonate (PC) semi-finished products and moulded parts; technical specification
- DIN 29880:1989 Aerospace; polycarbonate (PC) semi-finished products and moulded parts; technical specification
- DIN EN ISO 21305-1:2019-05 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 21305-1:2019); German version EN ISO 21305-1:2019
- DIN EN ISO 21305-2:2019-05 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21305-2:2019); German version EN ISO 21305-2:2019
- DIN EN ISO 21305-2:2019 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21305-2:2019)
- DIN EN ISO 21305-1:2019 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 21305-1:2019)
- DIN EN ISO 21305-1:2017 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO/DIS 21305-1:2017); German and English version prEN ISO 21305-1:2017
- DIN EN ISO 21305-2:2017 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO/DIS 21305-2:2017); German and English version prEN ISO 21305-2:2017
- DIN EN 16153:2015-05 Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods; German version EN 16153:2013+A1:2015
- DIN EN 16240:2014-03 Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods; German version EN 16240:2013
American Society for Testing and Materials (ASTM), Polycarbonate (PC)
- ASTM D6098-10 Standard Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)
- ASTM D6098-97(2003) Standard Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)
- ASTM D6098-97 Standard Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)
- ASTM D6098-16 Standard Classification System and Basis for Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)
- ASTM D3935-15 Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material
- ASTM D3935-21 Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material
British Standards Institution (BSI), Polycarbonate (PC)
- BS EN ISO 7391-2:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Preparation of test specimens and determination of properties
- BS EN ISO 7391-1:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Designation system and basis for specifications
- BS EN ISO 21305-1:2019 Tracked Changes. Plastics. Polycarbonate (PC) moulding and extrusion materials. Designation system and basis for specifications
- BS EN ISO 21305-2:2019 Tracked Changes. Plastics. Polycarbonate (PC) moulding and extrusion materials. Preparation of test specimens and determination of properties
- BS EN IEC 60674-3-3:2023 Plastic films for electrical purposes. Specifications for individual materials. Sheet 3. Polycarbonate (PC) films used for electrical insulation
- BS EN 60674-3-3:1998 Specification for plastic films for electrical purposes. Specifications for individual materials. Requirements for polycarbonate (PC) films used for electrical insulation
- BS EN 16240:2013 Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings. Requirements and test methods
- BS EN 16153:2013 Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings. Requirements and test methods
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Polycarbonate (PC)
- GB/T 35513.2-2017 Plastics—Polycarbonate (PC) moulding and extrusion materials—Part 2: Preparation of test specimens and determination of properties
- GB/T 35513.1-2017 Plastics—Polycarbonate (PC) moulding and extrusion materials—Part 1: Designation system and basis for specifications
European Committee for Standardization (CEN), Polycarbonate (PC)
- EN ISO 7391-2:1999 Plastics - Polycarbonate (PC) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties ISO 7391-2:1996
- EN ISO 7391-2:2006 Plastics ?Polycarbonate (PC) moulding and extrusion materials ?Part 2: Preparation of test specimens and determination of properties
- EN 16153:2013 Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods (Incorporates Amendment A1: 2015)
- EN 1013-2:1998 Light Transmitting Profiled Plastic Sheeting for Single Skin Roofing - Part 2: Specific Requirements and Test Methods for Sheets of Glass Fibre Reinforced Polyester Resin (GRP) Ratified European Text
- EN 1013-4:2000 Light Transmitting Profiled Plastic Sheeting for Single Skin Roofing - Part 4: Specific Requirements, Test Methods and Performance of Polycarbonate (PC) Sheets
- EN 16240:2013 Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
CEN - European Committee for Standardization, Polycarbonate (PC)
- EN ISO 21305-1:2019 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications
- EN ISO 21305-2:2019 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
Korean Agency for Technology and Standards (KATS), Polycarbonate (PC)
- KS M ISO 7391-1:2006 Plastics－Polycarbonate(PC) moulding and extrusion materials－Part 1：Designation system and basis for specifications
- KS M ISO 7391-2-2016(2021) Plastics－Polycarbonate(PC) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
- KS M ISO 7391-1-2006(2016) Plastics－Polycarbonate(PC) moulding and extrusion materials－Part 1：Designation system and basis for specifications
- KS M ISO 7391-1-2006(2021) Plastics－Polycarbonate(PC) moulding and extrusion materials－Part 1：Designation system and basis for specifications
- KS C IEC 60674-3-3:2014 Specification for plastic films for electrical purposes — Part 3: Specifications for individual materials — Sheet 3: Requirements for polycarbonate(PC) films used for electrical insulation
- KS C IEC 60674-3-3-2014(2019) Specification for plastic films for electrical purposes — Part 3: Specifications for individual materials — Sheet 3: Requirements for polycarbonate(PC) films used for electrical insulation
Japanese Industrial Standards Committee (JISC), Polycarbonate (PC)
- JIS K 6719-1:2011 Plastics -- Polycarbonate (PC) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
- JIS K 6719-2:2011 Plastics -- Polycarbonate (PC) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
- JIS K 6719-2:1999 Plastics -- Polycarbonate (PC) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
Danish Standards Foundation, Polycarbonate (PC)
- DS/EN ISO 7391-1:2006 Plastics – Polycarbonate (PC) moulding and extrusion materials – Part 1: Designation system and basis for specifications
- DS/EN ISO 7391-2:2006 Plastics – Polycarbonate (PC) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties
- DS/EN 16153:2013 Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
- DS/EN 60674-3-3:1999 Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Requirements for polycarbonate (PC) films used for electrical insulation
KR-KS, Polycarbonate (PC)
- KS M ISO 7391-2-2016 Plastics－Polycarbonate(PC) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
International Organization for Standardization (ISO), Polycarbonate (PC)
- ISO 21305-1:2019 Plastics — Polycarbonate (PC) moulding and extrusion materials — Part 1: Designation system and basis for specification
- ISO 21305-2:2019 Plastics — Polycarbonate (PC) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
- ISO 1628-4:1986 Plastics; Determination of viscosity number and limiting viscosity number; Part 4 : Polycarbonate (PC) moulding and extrusion materials
- ISO 1628-4:1999 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 4: Polycarbonate (PC) moulding and extrusion materials
ES-UNE, Polycarbonate (PC)
- UNE-EN ISO 21305-1:2020 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 21305-1:2019)
- UNE-EN ISO 21305-2:2020 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21305-2:2019)
- UNE-EN 16153:2013+A1:2015 Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
Association Francaise de Normalisation, Polycarbonate (PC)
- NF EN ISO 21305-1:2019 Plastiques - Matériaux à base de polycarbonate (PC) pour moulage et extrusion - Partie 1 : système de désignation et base de spécifications
- NF EN ISO 21305-2:2019 Plastiques - Polycarbonate (PC) pour moulage et extrusion - Partie 2 : préparation des éprouvettes et détermination des propriétés
- NF T53-032-1:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1 : designation system and basis for specifications.
- XP P38-507:2000 Couverture de bâtiments - Plaques profilées translucides simple paroi en polycarbonate (PC) - Résistance à la traversée d'un corps mou de grandes dimensions - Essai et spécification
- NF P38-508:2013 Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
- NF P38-400*NF EN 16240:2014 Light transmitting flat solid polycarbonate (PC) sheets for internal and external roofs, walls and ceilings - Requirements and test methods
- NF P38-508*NF EN 16153+A1:2015 Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
- NF P38-508/IN1*NF EN 16153/IN1:2015 Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
- NF EN 16240:2014 Plaques d'éclairement pleines planes en polycarbonate (PC) pour usage intérieur ou extérieur dans les toitures, bardages et plafonds - Exigences et méthodes d'essai
Indonesia Standards, Polycarbonate (PC)
- SNI 7626.1-2011 Test for food contact substances migrating from food packaging - Part 1: Plastic polycarbonate (PC)
Lithuanian Standards Office , Polycarbonate (PC)
- LST EN ISO 7391-1:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 7391-1:2006)
- LST EN ISO 7391-2:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:2006)
AENOR, Polycarbonate (PC)
- UNE-EN ISO 7391-1:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 7391-1:2006)
- UNE-EN ISO 7391-2:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:2006)
- UNE-EN 16240:2014 Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
- UNE-ISO 1628-4:2013 Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 4: Polycarbonate (PC) moulding and extrusion materials
Standard Association of Australia （SAA）, Polycarbonate (PC)
- IEC 60674-3-3:2023 Plastic films for electrical purposes — Part 3:Specifications for individual materials — Sheet 3: Polycarbonate (PC) films used for electrical insulation
European Committee for Electrotechnical Standardization（CENELEC）, Polycarbonate (PC)
- EN IEC 60674-3-3:2023 Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Polycarbonate (PC) films used for electrical insulation
International Electrotechnical Commission (IEC), Polycarbonate (PC)
- IEC 60674-3-3:1992 Specification for plastic films for electrical purposes; part 3: specifications for individual materials; sheet 3: requirements for polycarbonate (PC) films used for electrical insulation