01.040.19 试验 (词汇) 标准查询与下载

T/CEC 713-2022 区域供冷站设备性能试验导则

本文件规定了区域供冷站设备性能试验的方法和要求，包括一般规定、电制冷主机的性能试验、吸收式制冷主机的性能试验、水泵的性能试验、板式换热器的性能试验、蓄冰盘管的性能试验、冷却塔的性能试验、配电系统性能试验等。 本文件适用于新建、扩建及改建的区域供冷站设备性能试验。

Guidelines for equipment performance testing of district cooling stations

ASTM E1316-22a 无损检测的标准术语

1.1 This standard defines the terminology used in the standards prepared by the E07 Committee on Nondestructive Testing. These nondestructive testing (NDT) methods include: acoustic emission, electromagnetic testing, gammaand X-radiology, leak testing, liquid penetrant testing, magnetic particle testing, neutron radiology and gauging, ultrasonic testing, and other technical methods. 1.2 Committee E07 recognizes that the terms examination, testing, and inspection are commonly used as synonyms in nondestructive testing. For uniformity and consistency in E07 nondestructive testing standards, Committee E07 encourages the use of the terms examination or inspection and their derivatives when describing the application of nondestructive test methods. In a specific standard, either examination or inspection shall be used consistently throughout the document. Similarly, E07 encourages the use of the term test and its derivatives when referring to the body of knowledge of a nondestructive testing method. There are, however, appropriate exceptions when the term test and its derivatives may be used to describe the application of a nondestructive test, such as measurements which produce a numeric result (for example, when using the leak testing method to perform a leak test on a component, or an ultrasonic measurement of velocity). Additionally, the term test should be used when referring to the NDT method, that is, Radiologic Testing (RT), Ultrasonic Testing (UT), and so forth. (Example: Radiologic Testing (RT) is often used to examine material to detect internal discontinuities.) NOTE 1—The following sentences clarify this policy and illustrate its use: (a) Nondestructive testing methods are used extensively for the examination or inspection of materials and components. (b) The E07 Committee on Nondestructive Testing has prepared many documents to promote uniform usage of the nondestructive testing methods that are applied to examine or inspect materials and components. (c) Radiologic Testing (RT) is often used to inspect material to detect internal discontinuities. (d) Magnetic Particle Testing (MT), Liquid Penetrant Testing (PT), and Visual Testing (VT) are often used to examine the surface of a component. (e) The Bubble Leak Testing (BLT) method is sometimes used to leak test a pressure containing component to detect leaks. (f) A guide for Nondestructive Testing of additively manufactured materials will describe several methods but a practice will focus on a single inspection method. 1.3 Section A defines terms that are common to multiple NDT methods, whereas the subsequent sections define terms pertaining to specific NDT methods. 1.4 As shown on the chart below, when a nondestructive examination or inspection produces an indication, the indication is subject to interpretation as false, nonrelevant, or relevant. If it has been interpreted as relevant, the necessary subsequent evaluation will result in the decision to accept or reject the material. With the exception of accept and reject, which retain the meaning found in most dictionaries, all the 1 This terminology is under the jurisdiction of ASTM Committee E07 on Nondestructive Testing and is the direct responsibility of Subcommittee E07.92 on Editorial Review. Current edition approved June 1, 2022. Published June 2022. Originally approved in 1989. Last previous edition approved in 2022 as E1316 – 22. DOI: 10.1520/E1316-22A. Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 words used in the chart are defined in Section A. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Terminology for Nondestructive Examinations

DB43/T 2315-2022 机动车污染物排放测量用数字大气压温湿度综合仪性能检测方法

Performance testing method of digital atmospheric pressure temperature and humidity comprehensive instrument for motor vehicle pollutant emission measurement

ASTM F2078-22 与氢脆试验有关的标准术语

1.1 This terminology covers the principal terms, abbreviations, and symbols relating to mechanical methods for hydrogen embrittlement testing. These definitions are published to encourage uniformity of terminology in product specifications. 1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Terminology Relating to Hydrogen Embrittlement Testing

DB43/T 2306-2022 微库仑氯含量分析仪测试方法

Microcoulomb Chlorine Content Analyzer Test Method

ASTM E1316-22 无损检测的标准术语

1.1 This standard defines the terminology used in the standards prepared by the E07 Committee on Nondestructive Testing. These nondestructive testing (NDT) methods include: acoustic emission, electromagnetic testing, gammaand X-radiology, leak testing, liquid penetrant testing, magnetic particle testing, neutron radiology and gauging, ultrasonic testing, and other technical methods. 1.2 Committee E07 recognizes that the terms examination, testing, and inspection are commonly used as synonyms in nondestructive testing. For uniformity and consistency in E07 nondestructive testing standards, Committee E07 encourages the use of the terms examination or inspection and their derivatives when describing the application of nondestructive test methods. In a specific standard, either examination or inspection shall be used consistently throughout the document. Similarly, E07 encourages the use of the term test and its derivatives when referring to the body of knowledge of a nondestructive testing method. There are, however, appropriate exceptions when the term test and its derivatives may be used to describe the application of a nondestructive test, such as measurements which produce a numeric result (for example, when using the leak testing method to perform a leak test on a component, or an ultrasonic measurement of velocity). Additionally, the term test should be used when referring to the NDT method, that is, Radiologic Testing (RT), Ultrasonic Testing (UT), and so forth. (Example: Radiologic Testing (RT) is often used to examine material to detect internal discontinuities.) NOTE 1—The following sentences clarify this policy and illustrate its use: (a) Nondestructive testing methods are used extensively for the examination or inspection of materials and components. (b) The E07 Committee on Nondestructive Testing has prepared many documents to promote uniform usage of the nondestructive testing methods that are applied to examine or inspect materials and components. (c) Radiologic Testing (RT) is often used to inspect material to detect internal discontinuities. (d) Magnetic Particle Testing (MT), Liquid Penetrant Testing (PT), and Visual Testing (VT) are often used to examine the surface of a component. (e) The Bubble Leak Testing (BLT) method is sometimes used to leak test a pressure containing component to detect leaks. (f) A guide for Nondestructive Testing of additively manufactured materials will describe several methods but a practice will focus on a single inspection method. 1.3 Section A defines terms that are common to multiple NDT methods, whereas the subsequent sections define terms pertaining to specific NDT methods. 1.4 As shown on the chart below, when a nondestructive examination or inspection produces an indication, the indication is subject to interpretation as false, nonrelevant, or relevant. If it has been interpreted as relevant, the necessary subsequent evaluation will result in the decision to accept or reject the material. With the exception of accept and reject, which retain the meaning found in most dictionaries, all the 1 This terminology is under the jurisdiction of ASTM Committee E07 on Nondestructive Testing and is the direct responsibility of Subcommittee E07.92 on Editorial Review. Current edition approved Feb. 1, 2022. Published February 2022. Originally approved in 1989. Last previous edition approved in 2021 as E1316 – 21d. DOI: 10.1520/E1316-22. Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 words used in the chart are defined in Section A. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Terminology for Nondestructive Examinations

ASTM E1316-21d 无损检测的标准术语

Standard Terminology for Nondestructive Examinations

T/NAIA 090-2021 检验检测报告编制规则

本文件规定了检验检测报告（以下简称报告）编制的术语和定义、报告基本要求和报告内容要求。  本文件适用于取得资质认定的检验检测机构（以下简称机构）出具的报告，检验检测行业、领域或标准规范对报告编制有特定要求的，从其规定。  其他类型机构出具的报告可参照执行。

Inspection and testing report preparation rules

ASTM E1823-21 与疲劳和断裂试验有关的标准术语

1.1 This terminology contains definitions, definitions of terms specific to certain standards, symbols, and abbreviations approved for use in standards on fatigue and fracture testing. The definitions are preceded by two lists. The first is an alphabetical listing of symbols used. (Greek symbols are listed in accordance with their spelling in English.) The second is an alphabetical listing of relevant abbreviations. 1.2 This terminology includes Annex A1 on Units and Annex A2 on Designation Codes for Specimen Configuration, Applied Loading, and Crack or Notch Orientation. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Terminology Relating to Fatigue and Fracture Testing

ASTM E1316-21c 无损检测的标准术语

Standard Terminology for Nondestructive Examinations

ASTM E1316-21b 无损检测的标准术语

Standard Terminology for Nondestructive Examinations

ASTM E1316-21a 无损检测的标准术语

Standard Terminology for Nondestructive Examinations

PN-EN ISO 23243-2021-06 E 无损检测 阵列超声检测 词汇（ISO 23243:2020）

Non-destructive testing -- Ultrasonic testing with arrays -- Vocabulary (ISO 23243:2020)

OENORM EN ISO 23243:2021 无损检测 使用阵列的超声波检测 词汇（ISO 23243:2020）

Non-destructive testing - Ultrasonic testing with arrays - Vocabulary (ISO 23243:2020)

HJ 229-2021 医疗废物微波消毒集中处理工程技术规范

本标准规定了医疗废物微波消毒集中处理工程的污染物与污染负荷、总体要求、工艺设计、主要工艺设备和材料、检测与过程控制、主要辅助工程、职业卫生、施工与验收、运行与维护等。 本标准适用于医疗废物微波消毒集中处理设施新建、改建和扩建工程的设计、施工、验收及运行等全过程，可作为医疗废物微波消毒处理工程项目的环境影响评价、环境保护设施设计与施工、验收及建成后运行与环境管理的技术依据。

Technical specifications for microwave disinfection centralized treatment of medical waste

HJ 296-2021 环境标志产品技术要求 卫生陶瓷

本标准规定了卫生陶瓷环境标志产品的术语和定义、基本要求、技术内容和检验方法。 本标准适用于洗面器、坐便器（包括智能坐便器）、小便器、蹲便器、净身器、洗涤槽等卫生陶瓷制品。

Technical requirements for environmental labeling products for sanitary ceramics

SN EN ISO 23243:2021 无损检测 使用阵列的超声波检测 词汇（ISO 23243:2020）

Non-destructive testing - Ultrasonic testing with arrays - Vocabulary (ISO 23243:2020)

DIN EN ISO 23243:2021 无损检测. 阵列超声波检测. 词汇(ISO 23243-2020); 德文版 EN ISO 23243-2020

This document defines the terms related to phased arrays used in ultrasonic non-destructive testing.

Non-destructive testing - Ultrasonic testing with arrays - Vocabulary (ISO 23243:2020); German version EN ISO 23243:2020

PN-EN ISO 12706-2010 P 无损检测 渗透检测 词汇（ISO 12706:2009）

Non-destructive testing -- Penetrant testing -- Vocabulary (ISO 12706:2009)

LST EN ISO 23243:2021 无损检测 使用阵列的超声波检测 词汇（ISO 23243:2020）

Non-destructive testing - Ultrasonic testing with arrays - Vocabulary (ISO 23243:2020)