01.040.19 试验 (词汇) 标准查询与下载

ASTM E1316-13c 无损检测的标准术语

Standard Terminology for Nondestructive Examinations

SL 594-2013 水利水电起重机试验方法

本标准规定了检验水利水电起重机(以下简称“起重机”)应遵循的试验程序及检验方法。本标准适用于水利水电工程永久性和工程建设用的桥式起重机、门式起重机(含门式启闭机)、门座起重机、缆索起重机。固定卷扬式和液压启闭机可参照执行。本标准不适用于流动式起重机及浮式起重机。

Test method of cranes for water conservancy and hydroelectric power

ASTM E1823-12c 关于疲劳和断裂测试的标准术语

Standard Terminology Relating to Fatigue and Fracture Testing

GOST R 55045-2012 技术诊断. 声发射诊断. 术语, 定义和符号

Technical diagnostics. Acoustic emission diagnostic. Terms, definitions and symbols

ASTM E1316-11a 无损检测的标准术语

Standard Terminology for Nondestructive Examinations

ASTM E1316-10a 无损检测的标准术语

Standard Terminology for Nondestructive Examinations

ASTM E1823-09 关于疲劳和断裂测试的标准术语

1.1 This terminology contains definitions, definitions of terms specific to certain standards, symbols, and abbreviations approved for use in standards on fatigue and fracture testing. The definitions are preceded by two lists. The first is an alphabetical listing of symbols used. (Greek symbols are listed in accordance with their spelling in English.) The second is an alphabetical listing of relevant abbreviations. 1.2 This terminology includes Annex A1 on Units and Annex A2 on Designation Codes for Specimen Configuration, Applied Loading, and Crack or Notch Orientation.

Standard Terminology Relating to Fatigue and Fracture Testing

ASTM E1823-07 关于疲劳和断裂测试的标准术语

1.1 This terminology contains definitions, definitions of terms specific to certain standards, symbols, and abbreviations approved for use in standards on fatigue and fracture testing. The definitions are preceded by two lists. The first is an alphabetical listing of symbols used. (Greek symbols are listed in accordance with their spelling in English.) The second is an alphabetical listing of relevant abbreviations. 1.2 This terminology includes Annex A1 on Units and Annex A2 on Designation Codes for Specimen Configuration, Applied Loading, and Crack or Notch Orientation.

Standard Terminology Relating to Fatigue and Fracture Testing

ASTM E6-07a 与机械测试方法有关的标准术语

Standard Terminology Relating to Methods of Mechanical Testing

ASTM E1316-07 无损检测的标准术语

1.1 This standard defines the terminology used in the standards prepared by the E07 Committee on Nondestructive Testing. These nondestructive testing (NDT) methods include: acoustic emission, electromagnetic testing, gamma- and X-radiology, leak testing, liquid penetrant testing, magnetic particle testing, neutron radiology and gauging, ultrasonic testing, and other technical methods.1.2 Committee E07 recognizes that the terms examination, testing and inspection are commonly used as synonyms in nondestructive testing. For uniformity and consistency in E07 nondestructive testing standards, Committee E07 encourages the use of the term examination and its derivatives when describing the application of nondestructive test methods. There are, however, appropriate exceptions when the term test and its derivatives may be used to describe the application of a nondestructive test, such as measurements which produce a numeric result (for example, when using the leak testing method to perform a leak test on a component, or an ultrasonic measurement of velocity). Additionally, the term test should be used when referring to the NDT method, that is, Radiologic Testing (RT), Ultrasonic Testing (UT), and so forth. (Example: Radiologic Testing (RT) is often used to examine material to detect internal discontinuities.)1.3 Section A defines terms that are common to multiple NDT methods, whereas, the subsequent sections define terms pertaining to specific NDT methods.1.4 As shown on the chart below, when nondestructive testing produces an indication, the indication is subject to interpretation as false, nonrelevant or relevant. If it has been interpreted as relevant, the necessary subsequent evaluation will result in the decision to accept or reject the material. With the exception of accept and reject, which retain the meaning found in most dictionaries, all the words used in the chart are defined in Section A.

Standard Terminology for Nondestructive Examinations

KS B 0550-2006 非破坏试验术语

이 규격은 공업 분야에서 사용하는 비파괴 시험에 관한 주요 용어와 그 정의에 대하여 규정한

Glossary of terms in nondestuctive testing

ASTM E6-02 与机械测试方法有关的标准术语

1.1 This terminology covers the principal terms relating to methods of mechanical testing of solids. The general definitions are restricted and interpreted, when necessary, to make them particularly applicable and practicable for use in standards requiring or relating to mechanical tests. These definitions are published to encourage uniformity of terminology in product specifications. 1.2 Terms relating to fatigue and fracture testing are defined in Terminology E 1823.

Standard Terminology Relating to Methods of Mechanical Testing

SNI 19-4000-1996 等幅低循环疲劳试验相关术语

Terminology definition which related to low cycle fatigue testing on constant amplitudo

SNI 19-4005-1996 电磁测试相关术语与定义

Terms and definitions related to electromagnetic testing

CNS 13342-1994 非破坏检测词汇（超音波检测名词）

本标准规定非破坏检测中之超音波检测所用之词汇及其说明，并列出相对应之英文名词以供参考。

Glossary of Terms Related to Nondestructive Testing (Ultrasonic Testing Terms)

SNI 19-3386-1994 网球疲劳数据定义. 疲劳测试与统计分析

Definition of tennis for fatique testing and the stastical analysis of fatique data

SNI 19-3385-1994 机械测试方法相关术语定义

Definition of terms related to mechanical test method

SNI 19-1864-1990 X光线照相术测试. 定义与术语

Radiographic testing, Definition and terminology

CNS 11823-1987 非破坏检测词汇（涡电流检测名词）

本标准规定非破坏检测中之涡电流检测所用之词汇及其说明，并列出相对应之英文名词以供参考。

Glossary of Terms Related to Nondestructive Testing (Eddly Current Testing Terms)

CNS 11750-1986 非破坏检测词汇（磁粒检测名词）

本标准规定非破坏检测中磁粒检测所用之词汇及其说明，并列出相对应之英文名词，以供参考。

Glossary of Terms Related to Nondestructive Testing (Magnetic Particle Testing Terms)