13.340.30 呼吸保护装置 标准查询与下载

BS ISO 16976-5:2023 呼吸防护装置 人为因素 热效应

1   Scope This document is one part of a series of International Standards that provide information on factors related to human anthropometry, physiology, ergonomics and performance for the preparation of standards for design, testing and use of respiratory protective devices. This document contains information related to thermal effects of respiratory protective devices on the human body. In particular information is given for: — temperatures of surfaces associated with discomfort sensation and harmful effects on human tissues; — thermal effects of breathing gas temperatures on lung airways and tissues; — effects of breathing gas temperature and humidity on respiratory heat exchange; — effects of respiratory protective devices on overall body heat exchange. The information represents data for adult healthy men and women in the age 20 years to 60 years.

Respiratory protective devices. Human factors. Thermal effects

BS ISO 16976-8:2023 呼吸防护装置 人为因素 人体工学因素

1   Scope This document describes requirements on factors related to human physiology, ergonomics and performance for the preparation of standards for performance requirements, testing and use of respiratory protective devices (RPD). This document gives guidance on the generic ergonomic factors related to RPD. It specifies principles relating to — the biomechanical interaction between RPD and the human body, and — the interaction between RPD and the human senses: vision, hearing, smell, taste and skin contact. This document does not cover requirements related to specific hazards for which RPD are designed.

Respiratory protective devices. Human factors. Ergonomic factors

ISO 16976-7:2023 呼吸保护装置.人为因素.第7部分：听力和言语

This document contains information related to the interaction between respiratory protective devices and the human body functions of hearing and speech.

Respiratory protective devices — Human factors — Part 7: Hearing and speech

ASTM F3502-23 屏障表面覆盖物的标准规范

Standard Specification for Barrier Face Coverings

ISO 16976-5:2023 呼吸保护装置.人为因素.第5部分：热效应

This document is one part of a series of International Standards that provide information on factors related to human anthropometry, physiology, ergonomics and performance for the preparation of standards for design, testing and use of respiratory protective devices. This document contains information related to thermal effects of respiratory protective devices on the human body. In particular information is given for: — temperatures of surfaces associated with discomfort sensation and harmful effects on human tissues; — thermal effects of breathing gas temperatures on lung airways and tissues; — effects of breathing gas temperature and humidity on respiratory heat exchange; — effects of respiratory protective devices on overall body heat exchange. The information represents data for adult healthy men and women in the age 20 years to 60 years.

Respiratory protective devices — Human factors — Part 5: Thermal effects

BS ISO 16976-4:2023 呼吸防护装置 人为因素 呼吸功和呼吸阻力：基于生理的限制

1   Scope This document describes how to calculate the work performed by a person’s respiratory muscles with and without the external respiratory impediments that are imposed by RPD of all kinds, except diving equipment. This document describes how much additional impediment people can tolerate and contains values that can be used to judge the acceptability of an RPD. NOTE These calculations are explained in some textbooks on respiratory physiology (in the absence of an RPD), but most omit them or are incomplete in their explanations.

Respiratory protective devices. Human factors. Work of breathing and breathing resistance: physiologically based limits

BS ISO 16976-6:2023 呼吸防护装置 人为因素 心理生理影响

1   Scope This document provides information on the psycho-physiological effects related to the wearing of respiratory protective devices (RPD) and it is intended for the preparation of standards for selection and use of RPD. It specifies for the writers of RPD standards, principles relating to — the interaction between RPD and the human physiological and psychological perception, — the acceptance by the wearer, and — the need for training to improve acceptance of the RPD by the wearer. This document does not cover requirements related to the specific hazard for which the RPD is designed.

Respiratory protective devices. Human factors. Psycho-physiological effects

ISO 16976-6:2023 呼吸保护装置.人为因素.第6部分：心理生理效应

This document provides information on the psycho-physiological effects related to the wearing of respiratory protective devices (RPD) and it is intended for the preparation of standards for selection and use of RPD. It specifies for the writers of RPD standards, principles relating to — the interaction between RPD and the human physiological and psychological perception, — the acceptance by the wearer, and — the need for training to improve acceptance of the RPD by the wearer. This document does not cover requirements related to the specific hazard for which the RPD is designed.

Respiratory protective devices — Human factors — Part 6: Psycho-physiological effects

ISO 16976-4:2023 呼吸保护装置.人为因素.第4部分：呼吸功和呼吸阻力：基于生理学的极限

This document describes how to calculate the work performed by a person’s respiratory muscles with and without the external respiratory impediments that are imposed by RPD of all kinds, except diving equipment. This document describes how much additional impediment people can tolerate and contains values that can be used to judge the acceptability of an RPD. NOTE These calculations are explained in some textbooks on respiratory physiology (in the absence of an RPD), but most omit them or are incomplete in their explanations.

Respiratory protective devices — Human factors — Part 4: Work of breathing and breathing resistance: physiologically based limits

ISO 16976-8:2023 呼吸保护装置.人为因素.第8部分：人类工效学因素

This document describes requirements on factors related to human physiology, ergonomics and performance for the preparation of standards for performance requirements, testing and use of respiratory protective devices (RPD). This document gives guidance on the generic ergonomic factors related to RPD. It specifies principles relating to — the biomechanical interaction between RPD and the human body, and — the interaction between RPD and the human senses: vision, hearing, smell, taste and skin contact. This document does not cover requirements related to specific hazards for which RPD are designed.

Respiratory protective devices — Human factors — Part 8: Ergonomic factors

T/BYXT 006-2022 稀土抗抑菌口罩

1、分类：稀土抗抑菌口罩产品分类、产品名称及生产标准，应符合以下要求： 分类号　产品名称　生产标准 01　稀土抗抑菌日常防护型口罩　GB/T 32610 02　稀土抗抑菌儿童口罩　GB/T 38880 03　稀土抗抑菌医用防护口罩　GB 19083 04　稀土抗抑菌医用外科口罩　YY 0469 05　稀土抗抑菌一次性使用医用口罩　YY/T 0969 2、抗抑菌要求：产品牌号及抗抑菌基础材料载锌抗抑菌粉组分，应符合以下要求： 产品牌号　产品名称　载锌抗抑菌粉a含量(质量分数/%)　组分方法 REA-MASK01-2Nb　稀土抗抑菌日常防护型口罩　0.1-5　掺混法 REA-MASK02-2N　稀土抗抑菌儿童口罩　　 REA-MASK03-2N　稀土抗抑菌医用防护口罩　　 REA-MASK04-2N　稀土抗抑菌医用外科口罩　　 REA-MASK05-2N　稀土抗抑菌一次性使用医用口罩　　 a   稀土抗抑菌基础材料载锌抗抑菌粉，应符合T/BYXT 003.1-2022第4章的要求。 b  产品牌号参考GB/T 17803的表示方法，第一层用稀土抗抑菌（Rare earth antibacterial）首字母“REA”表示；第二层“MASK01”表示分类号为01的口罩产品（“MASK”为口罩英文名称）；第三层“2N”表示抗抑菌率为99%，（2为“9”的个数，“N”为数字“9”的英文首字母）。 3、抗抑菌性能应达到五星级，抗抑菌指标应符合如下要求： 项目　抑菌率　抗菌率　新冠病毒抑制率　防霉等级　抗抑菌等级 指标　≥99%　≥99%　≥99%　0级　★★★★★ 注：稀土抗抑菌口罩应根据产品对抗抑菌功能的需求，选择相应的抗抑菌功能项目，应符合5.2的要求。 4、内在质量要求：（1） 稀土抗抑菌日常防护型口罩，应符合GB/T 32610-2016第5章的规定。（2） 稀土抗抑菌儿童口罩，应符合GB/T 38880-2020第5章的规定。（3） 稀土抗抑菌医用防护口罩，应符合GB 19083-2010第4章的规定。（4） 稀土抗抑菌医用外科口罩，应符合YY 0469-2011第4章的规定。（5） 稀土抗抑菌一次性使用医用口罩，应符合YY/T 0969-2013第4章的规定。 5、标志：稀土抗抑菌口罩符合抗抑菌评价要求的产品。标志至少应包括：（1）抗抑菌选项可在产品包装箱、包装袋标识“抗菌、抑菌、抑制病毒、防霉”等相关选项字样。（2）符合T/BYXT 002评价要求的，应在产品包装标识稀土抗抑菌标准化评价标识。（3）稀土抗抑菌评价标识应符合T/BYXT 001-2022第9.1章的要求。

Rare earth antibacterial mask

ISO/TS 16975-4:2022 呼吸防护装置.选择、使用和维护.第4部分:传染性呼吸道疾病大流行/流行/暴发时呼吸防护装置的选择和使用指南

Respiratory protective devices — Selection, use and maintenance — Part 4: Selection and usage guideline for respiratory protective devices under pandemic/epidemic/outbreak of infectious respiratory di

KS M 6766-2022 火灾紧急逃生面罩.带火灾逃生罩的过滤装置.要求、试验和标记

Mask for emergency escape from fire — Filtering devices with hood for escape from fire — Requirements, testing, marking

ASTM E2952-22 空气净化呼吸防护排烟装置（RPED）标准规范

1.1 This specification covers the minimum requirements for the design, performance, testing, and certification of airpurifying respiratory protective smoke escape devices for immediate emergency evacuation without entry/re-entry. 1.2 The purpose of this specification shall be to provide minimum requirements for respiratory protective escape devices that provide limited protection for 15 min for escape from the by-products of fire, including particulate matter, carbon monoxide, other toxic gases, and the effects of radiant heat. 1.3 The requirements of this specification specify an airpurifying respiratory protective escape device with a laboratory-tested 15-min service life intended to provide head, eye, and respiratory protection from particulate matter, irritants, and toxic gases and vapors commonly produced by fire. 1.4 Controlled laboratory tests that are used to determine compliance with the performance requirements of this specification shall not be deemed as establishing performance levels for all situations to which individuals can be exposed. 1.5 This specification shall not apply to the requirements for provision, installation, or use of air-purifying respiratory protective smoke escape devices. 1.6 This specification shall not apply to respiratory protective escape devices intended for use in circumstances in which an oxygen deficiency (oxygen less than 19.5 % by volume) exists or might exist. 1.7 This specification is not intended to be used as a detailed manufacturing or purchase specification, but shall be permitted to be referenced as a minimum requirement in purchase specifications. 1.8 Units—The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.10 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Air-Purifying Respiratory Protective Smoke Escape Devices (RPED)

BS ISO 16976-2:2022 呼吸防护装置 人为因素 第2部分：人体测量学

1   Scope This document is one part of the ISO 16976 series that provide information on factors related to human anthropometry, physiology, ergonomics, and performance for the preparation of standards for design, testing, and use of respiratory protective devices. This document contains information related to anthropometry. In particular, information is given for: — anthropometric measurement methods; — anthropometric data for head, face, and neck dimensions; — anthropometric data for torso dimensions; — human test panels; — models of headforms.

Respiratory protective devices — Human factors - Part 2: Anthropometrics

BS ISO 16976-1:2022 呼吸防护装置 人为因素 代谢率和呼吸流速

1   Scope This document provides information on factors related to human anthropometry, physiology, ergonomics, and performance for the preparation of standards for performance requirements, testing, and use of respiratory protective devices. This document contains information related to respiratory and metabolic responses to rest and work at various intensities. Information is provided for the following: — metabolic rates associated with various intensities of work; — oxygen consumption as a function of metabolic rate and minute ventilation for persons representing three body sizes; — peak inspiratory flow rates during conditions of speech and no speech for persons representing three body sizes as a function of metabolic rates. The information contained within this document represents data for healthy adult men and women of approximately 30 years of age, but is considered to be applicable for the age range of the worker population.

Respiratory protective devices. Human factors - Metabolic rates and respiratory flow rates

BS ISO 16976-3:2022 呼吸防护装置 人为因素 呼吸环境中氧气的生理反应和限制以及二氧化碳的限制

1   Scope This document gives: — a description of the composition of the Earth's atmosphere; — a description of the physiology of human respiration; — a survey of the current biomedical literature on the effects of carbon dioxide and oxygen on human physiology; — examples of environmental circumstances where the partial pressure of oxygen or carbon dioxide can vary from that found at sea level. This document identifies oxygen and carbon dioxide concentration limit values and the length of time within which they would not be expected to impose physiological distress. To adequately illustrate the effects on human physiology, this document addresses both high altitude exposures where low partial pressures are encountered and underwater diving, which involves conditions with high partial pressures . The use of respirators and various work rates during which RPD can be worn are also included.

Respiratory protective devices. Human factors. Physiological responses and limitations of oxygen and limitations of carbon dioxide in the breathing environment

ISO 16976-1:2022 呼吸保护装置.人为因素.第1部分:代谢率和呼吸流率

This document provides information on factors related to human anthropometry, physiology, ergonomics, and performance for the preparation of standards for performance requirements, testing, and use of respiratory protective devices. This document contains information related to respiratory and metabolic responses to rest and work at various intensities. Information is provided for the following: — metabolic rates associated with various intensities of work; — oxygen consumption as a function of metabolic rate and minute ventilation for persons representing three body sizes; — peak inspiratory flow rates during conditions of speech and no speech for persons representing three body sizes as a function of metabolic rates. The information contained within this document represents data for healthy adult men and women of approximately 30 years of age, but is considered to be applicable for the age range of the worker population.

Respiratory protective devices — Human factors — Part 1: Metabolic rates and respiratory flow rates

ISO 16976-3:2022 呼吸保护装置.人为因素.第3部分:呼吸环境中氧气和二氧化碳的生理反应和限制

This document gives: — a description of the composition of the Earth's atmosphere; — a description of the physiology of human respiration; — a survey of the current biomedical literature on the effects of carbon dioxide and oxygen on human physiology; — examples of environmental circumstances where the partial pressure of oxygen or carbon dioxide can vary from that found at sea level. This document identifies oxygen and carbon dioxide concentration limit values and the length of time within which they would not be expected to impose physiological distress. To adequately illustrate the effects on human physiology, this document addresses both high altitude exposures where low partial pressures are encountered and underwater diving, which involves conditions with high partial pressures. The use of respirators and various work rates during which RPD can be worn are also included.

Respiratory protective devices — Human factors — Part 3: Physiological responses and limitations of oxygen and limitations of carbon dioxide in the breathing environment

ISO 16976-2:2022 呼吸保护装置.人体因素.第2部分:人体测量学

This document is one part of the ISO 16976 series that provide information on factors related to human anthropometry, physiology, ergonomics, and performance for the preparation of standards for design, testing, and use of respiratory protective devices. This document contains information related to anthropometry. In particular, information is given for: — anthropometric measurement methods; — anthropometric data for head, face, and neck dimensions; — anthropometric data for torso dimensions; — human test panels; — models of headforms.

Respiratory protective devices — Human factors — Part 2: Anthropometrics