13.340.30 呼吸保护装置 标准查询与下载

T/AHPCA 024-2020 含铜过滤式半面罩

本标准规定了含铜过滤式半面罩（以下简称面罩）的术语和定义、技术要求、检验规则、包装、标识、运输、贮存和有效期。 本标准适用于由面罩体、鼻夹和头带组成，其中面罩体由以含铜无纺布作为内层和外层、以熔喷布作为过滤层（两层）和普通其他无纺布作为中间层组成的含铜过滤式半面罩。 本标准适用于在日常生活中过滤外界空气中花粉、柳絮、细菌、病毒颗粒物和阻隔鼻腔或口腔呼出或喷出污染物进入环境所佩戴的含铜过滤式半面罩。 本标准不适用于缺氧环境、水下作业、逃生、消防、医用及工业等特殊行业用呼吸防护用品。 

Copper filter half mask

ASTM E2952-17(2021) 空气净化呼吸防护排烟装置（RPED）的标准规范

Standard Specification for Air-Purifying Respiratory Protective Smoke Escape Devices (RPED)

GSO ISO/TS 16975-1:2021 呼吸防护装置 选择、使用和维护 第1部分：建立和实施呼吸防护装置计划

ISO/TS 16975-1:2016 specifies detailed information to assist persons responsible for establishing and implementing a programme for respiratory protective devices (RPD) that meet the performance requirements of the performance standards. It does not apply to RPD programmes for RPD used exclusively under water, for use in aircraft, and medical life support respirators and resuscitators. NOTE The information contained in this part of ISO 16975 can be used to assist in the preparation of national or local regulations; however, this part of ISO 16975 does not supersede national or local regulations. WARNING ? Failure to select, use and maintain RPD correctly can result in injury, illness or death.

Respiratory protective devices — Selection, use and maintenance — Part 1: Establishing and implementing a respiratory protective device programme

KS P ISO TS 16976-1-2021 呼吸防护装置.人为因素.第1部分:代谢率和呼吸流率

Respiratory protective devices — Human factors —Part 1: Metabolic rates and respiratory flow rates

GSO ISO 16900-10:2021 呼吸防护装置 试验方法和试验设备 第10部分：耐点燃、耐火焰、耐辐射热和耐热

ISO 16900-10:2015 specifies the methods for resistance to ignition, flame, radiant heat, and heat.

Respiratory protective devices — Methods of test and test equipment — Part 10: Resistance to ignition, flame, radiant heat and heat

GSO ISO/TS 16973:2021 呼吸防护装置 呼吸防护装置（RPD）的分类 不包括水下应用的 RPD

ISO/TS 16973:2016 specifies the classification of Respiratory Protective Devices based on their performance. The performance requirements are given in the relevant performance standards.

Respiratory protective devices — Classification for respiratory protective device (RPD), excluding RPD for underwater application

GSO EN 12021:2021 呼吸设备 呼吸器用压缩气体

This European Standard specifies requirements for the quality of compressed gas supplied for mixing or use in respiratory protective devices and hyper- and hypobaric operations. Account is taken of the use of compressed gases for normal atmospheric pressure as well as for hyper- and hypobaric pressures. This European Standard does not apply to compressed gases used for medical purposes or for aerospace applications.

Respiratory equipment - Compressed gases for breathing apparatus

GSO ISO 16900-13:2021 呼吸防护装置试验方法和试验设备 第13部分：使用再生呼吸气体的RPD和特殊应用采矿逃生RPD：气体浓度、温度、湿度、呼吸功、呼吸 . 的综合试验

ISO 16900-13:2015 specifies tests which are specific to RPDs using regenerated breathable gas, compressed breathable gas with class L respiratory interfaces, and special application mining escape RPD.

Respiratory protective devices — Methods of test and test equipment — Part 13: RPD using regenerated breathable gas and special application mining escape RPD: Consolidated test for gas concentration, temperature, humidity, work of breathing, breathing ...

GSO ISO 16900-14:2021 呼吸防护装置 试验方法和试验设备 第14部分：声级的测量

ISO 16900-14:2015 specifies a laboratory test method for determining the sound level generated by the complete respiratory protective device (RPD) and RPD warning sounds measured on a headform to which the RPD is fitted.

Respiratory protective devices — Methods of test and test equipment — Part 14: Measurement of sound level

GSO ISO 16900-9:2021 呼吸防护装置 试验方法和试验设备 第9部分：吸入气体中二氧化碳含量的测定

ISO 16900-9:2015 specifies the test methods for determining the increased carbon dioxide content of the inhaled gas caused by wearing the RPD. Closed circuit supplied breathable gas RPD are excluded from ISO 16900-9:2015. NOTE See test method in ISO 16900‑13.

Respiratory protective devices — Methods of test and test equipment — Part 9: Determination of carbon dioxide content of the inhaled gas

KS P ISO TS 16976-1:2021 呼吸防护装置.人为因素.第1部分:代谢率和呼吸流率

Respiratory protective devices — Human factors —Part 1: Metabolic rates and respiratory flow rates

GSO ISO 16900-12:2021 呼吸防护装置 试验方法和试验设备 第12部分：平均呼吸功和峰值呼吸压力的测定

ISO 16900-12:2016 specifies the test methods for determining the volume-averaged work of breathing and peak respiratory pressures imposed by the respiratory protective device (RPD). Elastic work, elastic physiological effects, and information on physiological effects of work of breathing (WOB) are specified in ISO 16976‑4 and are not included in this test method.

Respiratory protective devices — Methods of test and test equipment — Part 12: Determination of volume-averaged work of breathing and peak respiratory pressures

GSO ISO 16900-5:2021 呼吸防护装置 试验方法和试验设备 第5部分：呼吸机、代谢模拟器、RPD 头模和躯干、工具和验证工具

ISO 16900-5:2016 specifies the characteristics of breathing machines, metabolic simulators, RPD head forms/torso, RPD tools and RPD verification tools that are common to RPD test laboratories. Standardization of these items is essential for the standardization of the test methods. Standardization of the RPD verification tools is essential for demonstrating the delivery of comparable results in different test laboratories. Descriptions on the use of the RPD tools for the different tests are specified in the relevant parts of ISO 16900.

Respiratory protective devices — Methods of test and test equipment — Part 5: Breathing machine, metabolic simulator, RPD headforms and torso, tools and verification tools

GSO ISO/TS 16975-2:2021 呼吸防护装置 选择、使用和维护 第2部分：建立和实施呼吸防护装置计划的简明指南

ISO/TS 16975-2:2016 provides brief guidance to assist persons responsible for establishing and implementing a programme for respiratory protective devices (RPD) that meet the performance requirements. There are special applications where the selection of suitable RPD using this guide is not appropriate. These are: a) Fire Fighting ? structural and wildland firefighting, hazardous materials and rescue applications; b) CBRN (Chemical, Biological, Radiological and Nuclear agents); c) Marine ? shipboard or off-shore firefighting or hazardous materials applications; d) Mining ? underground mining or firefighting and rescue applications; and e) Escape ? general, fire, CBRN, marine and mining. NOTE 1 For more detailed information relating to the special applications, refer to ISO/TS 16975‑1. This guidance does not apply to selecting RPD against bio aerosols. NOTE 2 Reference [3] addresses selection of RPD for bio aerosols that are capable of causing infection or adverse or allergic response but for which no occupational exposure limits have been established. This guidance does not apply to RPD programmes for RPD used exclusively under water, in aircraft, and medical life support respirators and resuscitators.

Respiratory protective devices — Selection, use and maintenance — Part 2: Condensed guidance to establishing and implementing a respiratory protective device programme

GSO ISO 16900-8:2021 呼吸防护装置 试验方法和试验设备 第8部分：辅助过滤RPD的RPD空气流速的测量

ISO 16900-8:2015 specifies the methods for measuring air flow rates delivered to the wearer by an assisted filtering RPD.

Respiratory protective devices — Methods of test and test equipment — Part 8: Measurement of RPD air flow rates of assisted filtering RPD

DIN EN 143:2021 呼吸保护装置 微粒过滤器 要求、测试、标记；德文版 EN 143:2021

This document specifies particle filters for use as replaceable components in unassisted respiratory protective devices with the exception of escape devices and filtering facepieces. Laboratory tests are included for the assessment of compliance with the requirements. Some filter

Respiratory protective devices - Particle filters - Requirements, testing, marking; German version EN 143:2021

DIN EN 14387:2021 呼吸保护装置 气体过滤器和组合过滤器 要求、测试、标记；德文版 EN 14387:2021

This document refers to gas filters and combined filters for use as replaceable components in unassisted respiratory protective devices with the exception of escape devices.Filters for use against CO are excluded from this document.Laboratory tests are included for the assessment

Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking; German version EN 14387:2021

T/ZZB 2141-2021 随弃式KN95防护口罩

本文件规定了随弃式KN95防护口罩（以下简称“口罩”）的术语和定义、基本要求、技术要求、试验方法、检验规则、标识、包装、储运和质量承诺。 本文件适用于防护非油性颗粒物用随弃式口罩（无呼吸阀）。 本文件不适用于防护有害气体和蒸气用呼吸防护用品，不适用于缺氧环境、水下作业、逃生、消防、医用等特殊行业用呼吸防护用品，也不适用于14周岁以下婴幼儿和儿童呼吸防护用品。

Disposable KN95 protective mask

OENORM EN 143-2021 呼吸保护装置 微粒过滤器 要求、测试、标记

Respiratory protective devices - Particle filters - Requirements, testing, marking

ISO 17420-5:2021 呼吸防护装置性能要求第5部分:特殊应用消防救援提供的可呼吸气体呼吸保护装置和过滤呼吸保护装置

This document specifies the minimum requirements for supplied breathable gas RPD and filtering RPD to be used for special application fire and rescue services.

Respiratory protective devices — Performance requirements — Part 5: Special application fire and rescue services - Supplied breathable gas RPD and filtering RPD