23.060 阀门 标准查询与下载

DLA MS24655 REV P-2007 0.250安装轴套焊接吊耳或综合线终端单杆迷你启动密封式设计 主动切断触发器开关

This specification is approved for use by all Departments and Agencies of the Department of Defense The requirements for acquiring the product described herein shall consistof this specification sheet and the latest issue of MIL-DTL-8834.

SWITCH, TOGGLE, POSITIVE BREAK, MINIATURE TOGGLED SEALED, SINGLE POLE, SOLDER LUG OR INTEGRATED WIRE TERMINALS: .250 MOUNTING BUSHINGS

DLA MS24656 REV P-2007 0.250安装轴套焊接吊耳或综合线终端单杆迷你启动密封式设计 主动切断触发器开关

This specification is approved for use by all Departments and Agencies of the Department of Defense The requirements for acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-DTL-8834.

SWITCH, TOGGLE, POSITIVE BREAK, MINIATURE TOGGLED SEALED, SINGLE POLE, SOLDER LUG OR INTEGRATED WIRE TERMINALS: .250 MOUNTING BUSHINGS

NAVY QPL-24552-10-2007 插座类型用于紧急供电系统的插头和开关的终端及密封的一般规格

This list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense. All products listed herein have been qualified under the requirements for the product as specified in the latest effective issue of the applicable specification. This list is subject to change without notice; revision or amendment of this list will be issued as necessary. The listing of a product does not release the contractor from compliance with the specification requirements.

TERMINALS AND SEALS, PLUGS AND SWITCH, CASUALTY POWER SYSTEMS, RECEPTACLE TYPE, GENERAL SPECIFICATION FOR

DLA QPL-9370-27-2007 调节压力抗荷服的自动阀门

This list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification, and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense.

VALVE, AUTOMATIC, PRESSURE REGULATING, ANTI-G-SUIT

ARMY QPL-49470-23-2007 一般规格的有标准的可靠性和高可靠性的.有(一般用途及温度稳定)开关式电源供应器陶瓷介质固定电容器

Commercial Item Description A-A-2329 dated September 27, 1985, is hereby reinstated and may be used for acquisition.

CAPACITOR, FIXED, CERAMIC DIELECTRIC, SWITCH MODE POWER SUPPLY (GENERAL PURPOSE AND TEMPERATURE STABLE), STANDARD RELIABILITY AND HIGH RELIABILITY, GENERAL SPECIFICATION FOR

DLA A-A-55422 A-2007 开关执行器(微型基础敏感开关用)转接器

This commercial item description (CID) covers the general requirements for switch actuator miniature basic sensitive switches. Actuators covered by this CID are designed to mate with miniature basic sensitive switches such as MIL-PRF-8805/27 or similar items.

ADAPTER, SWITCH ACTUATOR (FOR MINIATURE BASIC SENSITIVE SWITCHES)

DLA SMD-5962-99618 REV E-2007 微型电路,线型,辐射加固,CMOS高速四路SPST模式开关,单块硅

This drawing documents three product assurance class levels consisting of high reliability (device classes Q and M), space application (device class V) and for appropriate satellite and similar applications (device class T). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN)

MICROCIRCUIT, LINEAR, RADIATION HARDENED, CMOS HIGH SPEED QUAD SPST ANALOG SWITCH, MONOLITHIC SILICON

DLA MIL-DTL-2 G SUPP 1-2006 (压缩和液化气体的)气瓶阀门的一般规范

The activities listed above were interested in this document as of the date of this document.

VALVES, CYLINDER, GAS (FOR COMPRESSED OR LIQUEFIED GASES), GENERAL SPECIFICATION FOR

DLA MIL-DTL-2 G-2006 (压缩和液化气体的)气瓶阀门的一般规范

This specification provides design and operational requirements for cylinder valves (see 6.7.3) used with compressed gas (see 6.7.1) cylinders containing liquefied (see 6.7.7)or non-liquefied compressed gases (see 6.7.8) or mixtures.

VALVES, CYLINDER, GAS (FOR COMPRESSED OR LIQUEFIED GASES), GENERAL SPECIFICATION FOR

DLA QPL-12211-14-2006 压力开关

This list has been prepared for use by or for the Government in the acquisition of products covered by Specification MIL-DTL-12211. Listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense. All products listed herein have been qualified under the requirements for the product as specified in the latest effective issue of the applicable specification. This list is subject to change without notice; revision or amendment of this list will be issued as necessary. The listing of a product does not release the supplier from compliance with the specification requirements.

SWITCH, PRESSURE

DLA SMD-5962-87532 REV B-2006 硅单块 4列1.4安培达灵顿开关,直线型微型电路

This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A.

MICROCIRCUIT, LINEAR, QUAD 1.5 AMP DARLINGTON SWITCHES, MONOLITHIC SILICON

DLA A-A-50456 A VALID NOTICE 2-2006 150 级PSIG暖气包装罩散热器阀门

A-A-50456A, dated 21 August 2001, has been reviewed and determined to be valid for use in acquisition.

VALVES, RADIATOR, HEATING PACKED BONNET, CLASS 150 PSIG

DLA SMD-5962-95812 REV C-2006 反射变硬互补金属氧化物半导体双重双刀单掷开关硅单片电路线型微电路

This drawing documents three product assurance class levels consisting of high reliability (device classes Q andM), space application (device class V) and for appropriate satellite and similar applications (device class T). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN. For device class T, the user is encouraged to review the manufacturer’s Quality Management (QM) plan as part of their evaluation of these parts and their acceptability in the intended application.

MICROCIRCUIT, LINEAR RADIATION HARDENED CMOS, DUAL, DPST ANALOG SWITCHES, MONOLITHIC SILICON

DLA MS24417 REV K (1)-2006 2,3定位开关防护装置

This specification is approved for use by all Departments and Agencies of the Department of Defense.

GUARD, SWITCH, 2 OR 3 POSITION

DLA MS25221 REV G (1)-2006 2或3号定位开关防护装置

This specification is approved for use by all Departments and Agencies of the Department of Defense.

GUARD, SWITCH, 2 OR 3 POSITION

DLA QPL-24236-30-2006 温度调节装置(双金属)开关.一般规格

This 1ist has been prepared for use by or for the Government in the procurement of products covered by Specification MIL-PRF-24236.

SWITCHES, THERMOSTATIC (METALLIC AND BIMETALLIC), GENERAL SPECIFICATION FOR

DLA A-A-50457 A VALID NOTICE 2-2006 125 级PSIG暖气包装罩散热器阀门

A-A-50457A, dated 06 August 2001, has been reviewed and determined to be valid for use in acquisition.

VALVES, RADIATOR, HEATING PACKLESS BONNET, CLASS 125 PSIG

DLA MIL-PRF-24236 D SUPP 1-2006 (金属和双金属的)恒温开关 常规

This supplement forms a part of Performance Specification MIL-PRF-24236D, dated 5 April 20.

SWITCHES, THERMOSTATIC, (METALLIC AND BIMETALLIC), GENERAL SPECIFICATION FOR

DLA MIL-PRF-24236 D-2006 (金属和双金属的)恒温开关 常规

This specification covers the general requirements for metallic-element actuated, thermostatic switches intended primarily for use in electrical and electronic equipment, in alternating current (ac) and direct current (dc) applications, where temperature protection, overheat detection, or accurate temperature control is required. The operating temperatures and operating temperature ranges of switches are covered by this specification (see 3.1 and 6.2.2).

SWITCHES, THERMOSTATIC, (METALLIC AND BIMETALLIC), GENERAL SPECIFICATION FOR

DLA W-C-375D-2006 模制开关断路器;分流电路和服务

This specification covers molded case circuit breakers which fall within the general parameters specified in table XVI which are specifically designed to provide service-entrance, feeder, meter-service, or branch circuit protection and rated at not more than 4,000 amperes and 600 volts ac, 60 hertz (Hz).

CIRCUIT BREAKERS, MOLDED CASE; BRANCH CIRCUIT AND SERVICE