共找到 307 条与 其他绝缘材料 相关的标准,共 21 页
Resin-based reactive compounds for electrical insulation Part 10: Polyesterimide resin compounds
本文件描述了固体绝缘材料耐电痕化和相比电痕化指数的测量方法,适用于交流电压下使用的设备元件和盘状材料。 本文件提供了按照要求测定电蚀损的程序。 注1:耐电痕化指数的测量可作为材料的验收标准,也可作为对材料及零部件进行质量控制的方法。 相比电痕化指数主要可用作材料的基本特性表征和性能比较的参数。 本文件适用于评定材料的成分和表面特性。材料的成分和表面状况都直接影响评定的结果,因此在选用合适的材料前应考虑其成分和表面状况的影响。 本文件测试结果不能直接用于评估电气设备的安全爬电距离。 注2:本文件符合IEC60664 1。 注3:通过本试验,可以鉴别在潮湿环境下工作的电气设备上的材料耐电痕化性能优劣。若需评定户外使用材料的性能,则可采用更严酷的长期试验,采用较高电压和尺寸更大的试样(见IEC60587 的斜板试验),其他试验方法(如斜板法)可与本文件给出的滴定试验的材料排列顺序不同。
Method for the determination of the proof and the comparative tracking indices of solid insulating materials
本文件规定了电气用含云母颗粒的聚芳酰胺纤维纸的分类与命名、要求和试验方法、检验规则、包装、标志、运输和贮存。 本文件适用于电气用含云母颗粒不多于50%的聚芳酰胺纤维纸。
Non-cellulosic papers for electrical purposes—Part 4:Aramid fibre paper containing mica particles
本文件描述了电气绝缘用薄膜的试验方法。 本文件适用于电气绝缘用薄膜。
Plastic films for electrical purposes—Part 2: Methods of test
Insulating bonding sheet for laminated bus-bar
Non-cellulosic papers for electrical purposes—Part 3: Unfilled aramid (aromatic polyamide) papers
GB/T 36289的本部分规定了晶体硅太阳电池组件用氟塑料薄膜的分类、技术要求、试验方法、检验规则、包装、标志、运输和贮存。 本部分适用于晶体硅太阳电池组件用氟塑料薄膜(以下简称“氟膜”)。
Insulating films of crystalline silicon photovoltaic (PV) modules.Part 2:Fluorine plastic films
Insulating films of crystalline silicon photovoltaic(PV) modules—Part 1:Polyethylene terephthalate films
GB/T 5591的本部分规定了电气绝缘用柔软复合材料的分类与命名、要求、试验方法、接头和供货要求。 本部分适用于电气绝缘用柔软复合材料。
Combined flexible materials for electrical insulation.Part 3:Specifications for individual materials
Resin based reactive compounds used for electrical insulation—Part 2: Methods of test
Resin based reactive compounds used for electrical insulation—Part 7: Epoxy-anhydride vacuum pressure impregnation(VPI) resin
Combined flexible materials for electrical insulation—Part 1: Definitions and general requirements
Combined flexible materials for electrical insulation—Part 2: Methods of test
Industrial rigid laminated sheets based on thermosetting resins for electrical purposes—Part 5: Requirements for rigid laminated sheets based on melamine resins
Resin based reactive compounds used for electrical insulation— Part 8:Epoxy modified unsaturated polyester vacuum pressure impregnation (VPI) resin
GB/T 1408的本部分提出了测定固体绝缘材料工频(即48 Hz~62 Hz)短时电气强度的试验方法。 本部分规定了用液体和气体作为固体绝缘材料试验时的浸渍剂或周围媒质,但不适用于液体和气体的试验。
Insulating materials.Test methods for electric strength.Part 1:Test at power frequencies
GB/T 1408的本部分对GB/T 1408.1补充了在直流电压应力下测定固体绝缘材料电气强度的要求。
Insulating materials.Test methods for electric strength.Part 2:Additional requirements for tests using direct voltage
GB/T 1408的本部分对GB/T 1408.1补充了在1.2/50 μs冲击电压应力下,对固体绝缘材料电气强度测定的补充要求。
Insulating materials.Test methods for electric strength.Part 3:Additional requirements for 1.2/50 μs impulse tests
GB/T15022 的本部分规定了核電站1E级配电变压器绝缘用环氧浇注树脂的要求、.试验方法、检验规则及包装标志、贮存和运输。 本部分适用于核电站1E级配电变压器绝缘用环氧浇注树脂。 注:该树脂为高纯度环氧树脂、新型改性固化剂、促进剂,填料和色浆组成的热固化浇注树脂,分甲乙组分包装。
Resin based reactive compounds used for electrical insulation.Part 6:Epoxy casting resinous compounds use for class 1E distribution transformer in nuclear power generating stations
本标准规定了晶体在和贮存a 本标准适用于晶体莅
Insulating back sheet for crystalline silicon terrestrial photovoltaic(PV) modules
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号