53.020.01 起重设备综合 标准查询与下载

JIS B 8822-4:2001 起重机和提升设备.分类.第4部分:悬臂起重机

この規格は，予定寿命期間中のクレーンの運転サイクル数と負荷状態を基準とした荷重スペクトル係数を基準に，タワークレーン，移動式クレーン及び鉄道クレーンを除くジブクレーン及びその機械装置の分類及び等級について規定する。なお，この規格は，JIS B 0146-1 : 2000において定義されるジブクレーン及びその部品に適用する。

Cranes and lifting appliances -- Classification -- Part 4: Jib cranes

JB/T 4207.2-1999 手动起重设备用吊钩闭锁装置

　　本标准规定的闭锁装置适用于JB/T 4207.1-1999《手动起重设备用吊钩》中带凸耳的吊钩，其作用中避免索具的意外脱落，并可直观地反映钩口的变形。

Latch kits of hooks used for hand - operated hoisting appliances

NF C79-132:1999 机械安全性.机械的电气设备.第32部分:起重机要求

Safety of machinery. Electrical equipment of machines. Part 32 : requirements for hoisting machines.

BS EN 60204-32:1998 机械安全性.机械用电气设备.提升机要求

This part of IEC 60204 applies to the application of electrical and electronic equipment and systems to hoisting machines and related equipment. NOTE 1 - In this standard, the term electrical includes both electrical and electronic matters (i.e. electrical equipment means both the electrical and the electronic equipment). NOTE 2 - In the context of this part, the term person refers to any individual and includes those persons who are assigned and instructed by the user or his agent(s) in the use and care of the hoisting machine in question. The equipment covered by this standard commences at the point of connection of the supply to the electrical equipment of the hoisting machine (crane-supply-switch) including systems for power supply and control feeders situated outside of the hoisting machine, e.g. flexible cables or collector wires or collector bars (see figure 3). NOTE 3 - For the requirements for the electrical supply installation in buildings, see IEC 60364. This standard is applicable to equipment or parts of equipment not exceeding 1 000 V a.c. or 1 500 V d.c. between lines, and with nominal frequencies not exceeding 200 Hz. NOTE 4 - Requirements for high voltage equipment are under consideration by IEC/TC 44 and IEC/TC 99. Additional and special requirements can apply to the electrical equipment of hoisting machines that are used in potentially explosive and/or flammable atmospheres. For the purposes of this standard, hoisting machines include cranes of all types, winches of all types, and storage and retrieval machines. The following product groups are included: - overhead travelling cranes; - mobile cranes; - tower cranes; - slewing luffing cranes; - gantry cranes; - offshore cranes; - floating cranes; - winches of all types; - hoists and accessories; - loader cranes; - cable cranes; - load holding devices; - storage and retrieval machines; - monorail hoists; - straddle carriers; - rubber tyred gantry cranes (RTGs). The present part of IEC 60204 does not cover individual items of electrical equipment other than their selection for use and their erection.

Safety of machinery - Electrical equipment of machines - Requirements for hoisting machines

IEC 60204-32:1998 机械的安全 机械的电气设备 第32部分:起重机械的要求

This part of IEC 60204 applies to the application of electrical and electronic equipment and systems to hoisting machines and related equipment. NOTE 1 - In this standard, the term electrical includes both electrical and electronic matters (i.e. electrical equipment means both the electrical and the electronic equipment). NOTE 2 - In the context of this part, the term person refers to any individual and includes those persons who are assigned and instructed by the user or his agent(s) in the use and care of the hoisting machine in question. The equipment covered by this standard commences at the point of connection of the supply to the electrical equipment of the hoisting machine (crane-supply-switch) including systems for power supply and control feeders situated outside of the hoisting machine, e.g. flexible cables or collector wires or collector bars (see figure 3). NOTE 3 - For the requirements for the electrical supply installation in buildings, see IEC 60364. This standard is applicable to equipment or parts of equipment not exceeding 1000 V a.c. or 1500 V d.c. between lines, and with nominal frequencies not exceeding 200 Hz. NOTE 4 - Requirements for high voltage equipment are under consideration by IEC/TC 44 and IEC/TC 99. Additional and special requirements can apply to the electrical equipment of hoisting machines that are used in potentially explosive and/or flammable atmospheres. For the purposes of this standard, hoisting machines include cranes of all types, winches of all types, and storage and retrieval machines. The following product groups are included: - overhead travelling cranes; - mobile cranes; - tower cranes; - slewing luffing cranes; - gantry cranes; - offshore cranes; - floating cranes; - winches of all types; - hoists and accessories; - loader cranes; - cable cranes; - load holding devices; - storage and retrieval machines; - monorail hoists; - straddle carriers; - rubber tyred gantry cranes (RTGs). The present part of IEC 60204 does not cover individual items of electrical equipment other than their selection for use and their erection.

Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines

JB 8716-1998 汽车起重机和轮胎起重机安全规程

本标准规定了汽车起重机和轮胎起重机的设计、制造、检验、报废、使用与管理等方面的安全技术要求。 本标准适用于汽车起重机和轮胎起重机。

Truck crane and wheel crane-Safety code

JB/T 8715-1998 汽车起重机和轮胎起重机回转机构验收规范

本标准规定了汽车起重机和轮胎起重机的回转机构的验收内容、条件和方法 本标准适用于起重机回转机构产品质量的验收。

Regulation for approval of slewing mechanism of truck cranes and wheel cranes

CNS 13627-1996 营建用齿条式升降机

本标准适用于设置在营建用齿条攀登式升降机，在施工期间暂时按装之营建用升降机之设计、建造要求，其主要功能为载人、载货、人货两用。

Rack and Pionion Type Elevators for Construction Use

CNS 13628-1996 营建用提升机

本标准适用于营建工程用提升机。但输入或特殊构造之提升机不适用本标准。

Lifts for Construction Use

ANSI/ASAE S515-1994 蔬菜收割机、短途运输汽车和道路卡车的托板装载传输系统

The purpose of this Standard is to ensure compatibility between all vehicles used in a palletized load transfer system for vegetables. This Standard applies to vegetable harvesters, field shuttle vehicles, trailers, over-the-road trucks, and yard facilities used in such a system.

Pallet Load Transfer System for Vegetable Harvesters, Shuttle Vehicles and Road Trucks

SNI 05-3294-1994 起重与升降机械. 分类 第1部分:总则

Cranes and lifting appliances - Clasification Part 1 : General

SNI 05-3300-1994 起重机械. 基本模型最大能力

Lifting appliances - Range of maximum capacities for basic models

SNI 05-3295-1994 起重与升降机械. 钢缆选择 第1部分:总则

Cranes and lifting appliances - Selection of wire ropes Part 1: General

JB/T 3300-1992 平衡重式叉车.整机试验方法

本标准规定了0.5~10.0t内燃机平衡重式叉车和0.5~4.0t蓄电池平衡重式叉车的整机试验方法。 本标准适用于0.5~10.0t内燃机平衡重式叉车和0.5~4.0t蓄电池平衡重式叉车。其他类型叉车亦可参照使用。

Counter balanced forklift Whole machine test method

JIS A 4302:1992 电梯、自动扶梯、小型提升机的检查标准

Inspection standard of elevator, escalator and dumbwaiter

GOST 29320-1992 货物分配系统的机械设备.计算原理

Mechanical equipment. Load distribution systems. Bases of calculations

NF E52-072:1990 提升设备.液压设备.设计和制造规则

Lifting equipment. Hydraulic equipment. Design and construction rules.

ISO 4308-2:1988 起重机和起重机械 钢丝绳的选择 第2部分:流动式起重机 利用系数

Establishes the values of the minimum practical coefficients of utilization for ropes and rotation-resistant ropes used on mobile cranes. Applies to all mobile cranes as defined in ISO 4306-2.

Cranes and lifting appliances; selection of wire ropes; part 2: mobile cranes; coefficient of utilization

CNS 10595-1987 升降机之车厢与升降路之尺度

本标准适用于建筑物及架设物等设置各种升降机车厢及升降路之尺寸之规定。

Size of Car and Hoistway of Elevator

GOST 1575-1987 升降起重机.主要参数

Настоящий стандарт распространяется на грузоподъемные краны и устанавливает ряды их основных параметров. Стандарт не распространяется н

Hoisting cranes. Series of main parameters