59.140.30 皮革和裘皮 标准查询与下载
共找到 2412 条与 皮革和裘皮 相关的标准，共 161 页
1 Scope This document specifies requirements, sampling methods and testing methods for wet blue leather produced from goat skins tanned without hair and with the use of basic chromium sulfate as the primary tanning agent.
Leather. Wet blue goat skins. Specification
- ICS
- 59.140.30
- CCS
- 发布
- 2022-12-31
- 实施
- 2022-12-31
本标准规定了牛皮家具用皮革的基本要求、技术要求、试验方法、检测规则、标志、包装、运输和贮存、质量承诺。
LeatherForCowhideFurniture
- ICS
- 59.140.30
- CCS
- C192
- 发布
- 2022-12-12
- 实施
- 2023-04-25
本文件规定了服装用水貂毛皮的基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存及质量承诺等内容。 本文件适用于成人服装用水貂毛皮。
Minks for garment
- ICS
- 59.140.30
- CCS
- C191
- 发布
- 2022-12-08
- 实施
- 2023-04-04
1 Scope This document specifies a test method for the determination of the bending force of leather.
Leather. Physical and mechanical tests. Determination of bending force
- ICS
- 59.140.30
- CCS
- 发布
- 2022-11-30
- 实施
- 2022-11-30
1 Scope This document specifies general principles on colour fastness evaluation tests for leather, as listed in Annex A. Procedures included in this document are common to most of the fastness test methods. This document provides a common basis for testing and reporting colour fastness. The uses and limitations of the methods are pointed out, several terms are defined, an outline of the drafting of the methods is given and the contents of the clauses describing the methods are discussed. Procedures common to a number of the methods are discussed briefly. Colour fastness means the resistance of the colour to the different agents to which these materials can be exposed during manufacture and their subsequent use. The change in colour of leather and staining of undyed adjacent fabrics or other materials are assessed as fastness ratings. Other visible changes in the leather under test, for example surface appearance, change in gloss or shrinkage, are considered as separate properties and reported as such. The leather fastness test methods can be used not only for assessing leather and related materials, such as coated leather and leather board, but also for the eventual assessment of the colour fastness of leather dyes. When such a method is so used, the dye is applied to a specified retanned leather or crust leather in defined depths of colour by stated procedures and the material is then tested in the usual way.
Leather. Tests for colour fastness. General principles of testing
- ICS
- 59.140.30
- CCS
- 发布
- 2022-11-30
- 实施
- 2022-11-30
1 Scope This document specifies a method for the determination of the total metal content in leather using digestion of the leather and subsequent determination with inductively coupled plasma optical emission spectrometry (ICP-OES), inductively coupled plasma mass spectrometry (ICP-MS), atomic absorption spectrometry (AAS) or spectrometry of atomic fluorescence (SFA). This method determines the total metal content in leather. It is not compound-specific or specific to the oxidation state of the metals. The method is applicable for determining the following metals: Aluminium (Al) Copper (Cu) Potassium (K) Antimony (Sb) Iron (Fe) Selenium (Se) Arsenic (As) Lead (Pb) Silicon (Si) Barium (Ba) Magnesium (Mg) ...
Leather. Chemical determination of metal content. Total metal content
- ICS
- 59.140.30
- CCS
- 发布
- 2022-11-30
- 实施
- 2022-11-30
1 Scope This document specifies a method for measuring the adhesion of the finish to leather or the adhesion between two adjacent layers of the finish. The method is valid for all finished flexible leathers with a smooth surface that can be bonded to an adherent plate without the adhesive penetrating into the finish. Preliminary experiments can be necessary to determine whether these conditions are met. This test method applies to finished leathers with a thick finish-coat. The method specified in this document does not apply to unpigmented articles or articles without a continuous coating layer, such as: — nubuk; — aniline; — pull-up; — suede; — perforated leather.
Leather. Test for adhesion of finish
- ICS
- 59.140.30
- CCS
- 发布
- 2022-11-30
- 实施
- 2022-11-30
BS EN ISO 20137. Leather. Chemical tests. Guidelines for testing critical chemicals in leather
- ICS
- 59.140.30
- CCS
- 发布
- 2022-11-30
- 实施
- 2022-11-30
This document specifies requirements, sampling methods and testing methods for wet blue leather produced from goat skins tanned without hair and with the use of basic chromium sulfate as the primary tanning agent.
Leather — Wet blue goat skins — Specification
- ICS
- 59.140.30
- CCS
- 发布
- 2022-11-18
- 实施
This document specifies requirements, sampling methods and testing methods for wet blue leather produced from sheep skins tanned without wool and with the use of basic chromium sulfate as the primary tanning agent.
Leather — Wet blue sheep skins — Specification
- ICS
- 59.140.30
- CCS
- 发布
- 2022-11-18
- 实施
This document specifies requirements, sampling methods and testing methods for wet blue leather produced from bovine hides and parts of bovine hides tanned without hair and with the use of basic chromium sulfate as the primary tanning agent.
Leather — Bovine wet blue — Specification
- ICS
- 59.140.30
- CCS
- 发布
- 2022-11-18
- 实施
This document specifies general principles on colour fastness evaluation tests for leather, as listed in Annex A. Procedures included in this document are common to most of the fastness test methods. This document provides a common basis for testing and reporting colour fastness. The uses and limitations of the methods are pointed out, several terms are defined, an outline of the drafting of the methods is given and the contents of the clauses describing the methods are discussed. Procedures common to a number of the methods are discussed briefly. Colour fastness means the resistance of the colour to the different agents to which these materials can be exposed during manufacture and their subsequent use. The change in colour of leather and staining of undyed adjacent fabrics or other materials are assessed as fastness ratings. Other visible changes in the leather under test, for example surface appearance, change in gloss or shrinkage, are considered as separate properties and reported as such. The leather fastness test methods can be used not only for assessing leather and related materials, such as coated leather and leather board, but also for the eventual assessment of the colour fastness of leather dyes. When such a method is so used, the dye is applied to a specified retanned leather or crust leather in defined depths of colour by stated procedures and the material is then tested in the usual way.
Leather - Tests for colour fastness - General principles of testing (ISO 7906:2022)
- ICS
- 59.140.30
- CCS
- 发布
- 2022-11-09
- 实施
- 2023-02-28
This document specifies a method for measuring the adhesion of the finish to leather or the adhesion between two adjacent layers of the finish. The method is valid for all finished flexible leathers with a smooth surface that can be bonded to an adherent plate without the adhesive penetrating into the finish. Preliminary experiments can be necessary to determine whether these conditions are met. This test method applies to finished leathers with a thick finish-coat. The method specified in this document does not apply to unpigmented articles or articles without a continuous coating layer, such as: — nubuk; — aniline; — pull-up; — suede; — perforated leather.
Leather - Test for adhesion of finish (ISO 11644:2022)
- ICS
- 59.140.30
- CCS
- 发布
- 2022-11-02
- 实施
- 2023-02-28
本文件规定了用发光细菌法检测皮革对环境影响的试验原理、试验方法。
Leather—Environmental safety assessment method—Luminescent bacteria test
- ICS
- 59.140.30
- CCS
- C191
- 发布
- 2022-11-01
- 实施
- 2022-11-11
This document specifies a test method for the determination of the bending force of leather.
Leather - Physical and mechanical tests - Determination of bending force (ISO 14087:2022)
- ICS
- 59.140.30
- CCS
- 发布
- 2022-10-19
- 实施
- 2023-01-31
This document specifies general principles on colour fastness evaluation tests for leather, as listed in Annex A. Procedures included in this document are common to most of the fastness test methods. This document provides a common basis for testing and reporting colour fastness. The uses and limitations of the methods are pointed out, several terms are defined, an outline of the drafting of the methods is given and the contents of the clauses describing the methods are discussed. Procedures common to a number of the methods are discussed briefly. Colour fastness means the resistance of the colour to the different agents to which these materials can be exposed during manufacture and their subsequent use. The change in colour of leather and staining of undyed adjacent fabrics or other materials are assessed as fastness ratings. Other visible changes in the leather under test, for example surface appearance, change in gloss or shrinkage, are considered as separate properties and reported as such. The leather fastness test methods can be used not only for assessing leather and related materials, such as coated leather and leather board, but also for the eventual assessment of the colour fastness of leather dyes. When such a method is so used, the dye is applied to a specified retanned leather or crust leather in defined depths of colour by stated procedures and the material is then tested in the usual way.
Leather — Tests for colour fastness — General principles of testing
- ICS
- 59.140.30
- CCS
- 发布
- 2022-10-19
- 实施
Leather — Tests for colour fastness — General principles of testing
- ICS
- 59.140.30
- CCS
- 发布
- 2022-10
- 实施
- 2022-10
Leather — Test for adhesion of finish
- ICS
- 59.140.30
- CCS
- 发布
- 2022-10
- 实施
- 2022-10
1 Scope This document specifies a method for assessing the propensity of dyes and pigments to migrate from leather to a synthetic substrate by determining the transfer of colour from the leather to white polymeric material in contact with it. This method is applicable to leather of all kinds at any stage of processing.
Leather. Tests for colour fastness. Colour fastness to migration into polymeric material
- ICS
- 59.140.30
- CCS
- 发布
- 2022-09-30
- 实施
- 2022-09-30
Green Design Product Evaluation Technical Specifications for Fur Products
- ICS
- 59.140.30
- CCS
- Y46
- 发布
- 2022-09-30
- 实施
- 2023-04-01
