59.140.30 皮革和裘皮 标准查询与下载

KS M ISO 4047-2023 皮革硫酸盐总灰分和硫酸盐水不溶性灰分的测定

Leather — Determination of sulphated total ash and sulphated water-insoluble ash

KS M ISO 15703-2023 皮革色牢度试验耐温和洗涤色牢度

Leather — Tests for colour fastness — Colour fastness to mild washing

KS M ISO 11641-2023 皮革色牢度试验耐汗色牢度

Leather — Tests for colour fastness — Colour fastness to perspiration

KS M ISO 14931-2023 皮革服装用皮革（不包括毛皮）规范和取样程序

Leather — Leather for apparel(excluding furs) — Specifications and sampling procedures

KS M ISO 20942-2023 皮革全铬鞋面革规范和试验方法

Leather — Full chrome upper leather — Specification and test methods

KS M 6883-2023 鞋用皮革

Leather for shoes

KS M ISO 15702-2023 皮革色牢度试验耐机洗色牢度

Leather — Tests for colour fastness — Colour fastness to machine washing

KS M ISO 11644-2023 皮革饰面附着力试验

Leather — Test for adhesion of finish

KS M ISO 17228-2023 皮革色牢度试验加速老化变色

Leather — Tests for colour fastness — Change in colour with accelerated ageing

T/ZFA 15-2023 家具用头层皮革等级评价规范

本文件的主要技术内容包括：家具用头层皮革的评价规则、技术要求(包括感官要求、可利用面积、物理机械性能、修边要求、有害物质限量)、试验方法、检验规则、标识、包装、运输和贮存等。

Specification for grade evaluation of top leather for furniture

BS EN 16484:2023 皮革 皮革生产原产地判定要求

Leather. Requirements for the determination of the origin of leather production

T/CRGTA 12-2023 二手（旧）皮革毛皮制品流通技术要求

本文件规定了二手（旧）皮革毛皮流通中的收购要求、鉴定检测要求、品质鉴定要求、品相鉴定要求、价值评估要求、储运与包装要求及销售要求。

Technical requirements for circulation of second-hand leather and fur goods

23/30477496 DC BS EN ISO 17234-1 皮革 染色皮革中某些偶氮着色剂测定的化学试验 第1部分：偶氮着色剂中某些芳香胺的测定

BS EN ISO 17234-1. Leather. Chemical tests for the determination of certain azo colourants in dyed leathers - Part 1. Determination of certain aromatic amines derived from azo colourants

ASTM D8042-18(2023) 蓝湿皮和白湿皮收缩温度的试验方法

1.1  This test method covers the determination of the shrinkage temperature of all types of Wet Blue and Wet White. The heating medium is water when the shrinkage temperature is at or below 98 °C. The heating medium is a glycerine-water solution when the shrinkage temperature is above 98 °C. 1.2  The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only. 1.3  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Test Method for Shrinkage Temperature of Wet Blue and Wet White

ASTM D4655-95(2023) 皮革中硫酸盐的标准测试方法（总酸、中性酸和混合酸）

1.1  These test methods are intended for use in determining the total, neutral, and combined acid sulfate in mineral-tanned leather. 1.2  The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Sulfates in Leather (Total, Neutral, and Combined Acid)

ASTM D6016-17(2023) 皮革中可萃取氮的测定的标准试验方法

1.1  This test method covers quantitatively determining the water extractable nitrogen in leather. 1.2  The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determination of Nitrogen, Water Extractable in Leather

ASTM D3495-10(2023) 皮革的己烷萃取的标准测试方法

1.1  This test method covers the quantitative extraction of all types of leather with hexane. This test method does not apply to wet blue. 1.2  The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Hexane Extraction of Leather

BS EN 17900:2023 皮革 皮革密度计算的标准数据

Leather. Standard data for the calculation of leather density

23/30474051 DC BS EN ISO 21135 皮革鞣制工业用化学品 某些双酚总含量的测定

BS EN ISO 21135. Chemicals for the leather tanning industry. Determination of the total content of certain bisphenols

KS M ISO 23910-2023 皮革物理和机械试验耐缝合撕裂性的测量

Leather — Physical and mechanical tests — Measurement of stitch tear resistance