59.140.30 皮革和裘皮 标准查询与下载

ASTM D4655-95(2023) 皮革中硫酸盐的标准测试方法（总酸、中性酸和混合酸）

1.1  These test methods are intended for use in determining the total, neutral, and combined acid sulfate in mineral-tanned leather. 1.2  The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Sulfates in Leather (Total, Neutral, and Combined Acid)

ASTM D3495-10(2023) 皮革的己烷萃取的标准测试方法

1.1  This test method covers the quantitative extraction of all types of leather with hexane. This test method does not apply to wet blue. 1.2  The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Hexane Extraction of Leather

BS EN 17900:2023 皮革 皮革密度计算的标准数据

Leather. Standard data for the calculation of leather density

23/30474051 DC BS EN ISO 21135 皮革鞣制工业用化学品 某些双酚总含量的测定

BS EN ISO 21135. Chemicals for the leather tanning industry. Determination of the total content of certain bisphenols

KS M ISO 22517-2023 皮革化学试验农药残留量的测定

Leather — Chemical tests — Determination of pesticide residues content

KS M ISO 17235-2023 皮革─ 物理和机械测试─ 柔软度的测定

Leather ─ Physical and mechanical tests ─ Determination of softness

KS M ISO 18218-1-2023 皮革乙氧基烷基酚的测定第1部分:直接法

Leather — Determination of ethoxylated alkylphenols — Part 1: Direct method

KS M ISO 19074-2023 皮革物理和机械试验毛细作用（毛细作用）吸水率的测定

Leather — Physical and mechanical tests — Determination of water absorption by capillary action (wicking)

KS M ISO 22700-2023 皮革成品皮革颜色和色差的测定

Leather — Measuring the colour and colour difference of finished leather

KS M ISO 23910-2023 皮革物理和机械试验耐缝合撕裂性的测量

Leather — Physical and mechanical tests — Measurement of stitch tear resistance

KS M 6903-2023 皮革中氧化铬的标准试验方法高氯酸氧化

Standard test method for chromic oxide in leather — Perchloric acid oxidation

KS M ISO 18218-2-2023 皮革乙氧基烷基酚的测定第2部分:间接法

Leather — Determination of ethoxylated alkylphenols — Part 2: Indirect method

ISO 11936:2023 | IULTCS/IUC 42:2023 皮革 某些双酚总含量的测定

Leather — Determination of total content of certain bisphenols

ISO 18218-1:2023 皮革 乙氧基化烷基酚 (APEO) 的测定 直接法

Leather. Determination of ethoxylated alkylphenols (APEO) - Direct method

ISO 18218-1:2023 | IULTCS/IUC 28-1 皮革 乙氧基化烷基酚（APEO）的测定 第1部分：直接法

Leather — Determination of ethoxylated alkylphenols (APEO) — Part 1: Direct method

ISO 23702-1:2023 | IULTCS/IUC 39-1 皮革 全氟烷基和多氟烷基物质 第 1 部分：液相色谱萃取法测定非挥发性化合物

Leather — Per- and polyfluoroalkyl substances — Part 1: Determination of non-volatile compounds by extraction method using liquid chromatography

QB/T 2925-2023 毛皮 耐日晒色牢度试验方法

Fur—Test methods for color fastness to light

QB/T 5810-2023 植鞣腰带革

Vegetable tanned belt leather

QB/T 1873-2023 铬鞣鞋面用皮革

Chromium leather for shoe upper

ASTM D1913-00(2023) 服装类皮革耐湿性的标准试验方法（喷雾试验）

1.1  This test method covers the qualitative evaluation of the surface repellency to water of garment-type leathers. This test method does not apply to wet blue. 1.2  The values stated in inch-pound units are to be regarded as standard. The values shown in parentheses are provided for information only. 1.3  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Resistance to Wetting of Garment-Type Leathers (Spray Test)