71.040.10 化学实验室、实验室设备 标准查询与下载

T/TZAS 007-2023 稳定性试验箱

本文件规定了稳定性试验箱（以下可简称：试验箱）相关的术语和定义、使用条件、型式与基本参数、技术要求、试验方法、检验规则、标志、使用说明书以及包装、运输和贮存等内容。 本文件适用于装备了有源制冷除湿、加热加湿、可见光照、紫外光照等装置，对药品、生物制品、食品、化妆品、医疗器械及其它产品进行一定温度、湿度、可见光照、近紫辐射试验的综合稳定性试验箱（按特珠合同要求生产的产品不受此限），试验箱设备主要用于制药、生物、食品、医疗器械等行业的研究性试验、产品的定型 (型式)试验、生产检查试验、产品的验收试验、安全性试验等。

Stability test chamber

T/TZAS 008-2023 综合稳定性试验箱

本文件规定了综合稳定性试验箱（以下可简称：试验箱）相关的术语和定义、使用条件、型式与基 本参数、技术要求、试验方法、检验规则、标志、使用说明书以及包装、运输和贮存等内容。 本文件适用于装备了有源制冷除湿、加热加湿、可见光照、紫外光照等装置，对药品、生物制品、 食品、化妆品、医疗器械及其它产品进行一定温度、湿度、可见光照、近紫辐射试验的综合稳定性试验箱（按特珠合同要求生产的产品不受此限），试验箱设备主要用于制药、生物、食品、医疗器械等行业的研究性试验、产品的定型 (型式)试验、生产检查试验、产品的验收试验、安全性试验等。

Comprehensive stability test chamber

T/OTOP 1038-2023 斑马鱼实验室建设技术规范

本文件规定了斑马鱼实验室设计、施工和验收基本要求，包括工艺要求和功能分区、建筑和装修、通风与空气调节、给水排水、电气、检测和验收等。 本文件适用于斑马鱼实验室的建设。

Construction technical specifications for zebrafish Laboratories

T/QGCML 1647-2023 全钢实验台

本文件规定了全钢试验台的术语和定义、符号、技术要求、试验方法、检验规则、标志、贮存、运输、使用说明。 本文件适用于高等院校、科研院所、企业等相关实验室用物理实验台、化学实验台、生物实验台、操作台等实验操作台（以下简称“实验台”）。

All steel experimental bench

ASTM D4178-23 湿度分析仪校准的标准实施规程

Standard Practice for Calibrating Moisture Analyzers

T/QGCML 1522-2023 FLA微型光纤光谱仪

本文件规定了FLA微型光纤光谱仪的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于FLA微型光纤光谱仪的生产及检验。

FLA Micro Fiber Spectrometer

DB51/T 3106-2023 化学实验室安全应急智慧系统建设指南

本文件描述了检验检测机构、科研院所、企业、学校、医院等化学实验室以物联网信息共享和交换平台为基础的安全应急智慧系统建设要求。 本文件适用于化学实验室的新建或升级改造。

Guidelines for the construction of intelligent safety emergency system for chemical laboratories

DB23/T 3541-2023 化学实验室突发事件应急处置指南

Emergency response guide for chemical laboratory emergencies

IEC 61010-2-034:2023 测量、控制和实验室用电气设备的安全要求.第2-034部分:绝缘电阻测量设备和电强度试验设备的特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-034: Particular requirements for measurement equipment for insulation resistance and test equipment f

IEC 61010-2-034:2023 EXV 测量、控制和实验室用电气设备的安全要求.第2-034部分:绝缘电阻测量设备和电强度试验设备的特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-034: Particular requirements for measurement equipment for insulation resistance and test equipment f

T/SLEA 0041-2023 实验室用化学品安全储存柜技术规范

本文件规定了用于储存易燃液体、腐蚀性化学品、易制毒易制爆危险化学品、压缩气瓶的实验室用化学品安全储存柜（以下简称“安全储存柜”）的术语和定义、分类、要求、试验方法、标识、包装、贮存、运输及产品说明。 本文件适用于安全储存柜的生产、检测以及实验室应用，其他应用领域可参考使用。 说明：标准中的CCS号是按照监管局系统中使用的"中国标准文献分类号"定的，本平台数据库中所用的分类号为2017版的国民经济行业分类号，两边系统中分类号不一致，在本平台中上传时，重新按照本平台的分类号选择的，故下载标准文本后会看到CCS号与在本系统中选择的分类号不一致的情况

Technical specification for laboratory chemicals safety storage cabinet

T/CIMA 0046-2023 水质自动监测平台技术要求

地表水（海水除外）水质自动监测平台的选址、供电、取排水、通信、安全防护和结构等技术要求。

Technical requirements for automatic water quality monitoring platform

T/CIMA 0044-2023 蓝藻密度在线监测仪

蓝藻密度在线监测仪的要求，试验方法，检验规则，标志、包装、运输和贮存。

Cyanobacteria density online monitor

T/CIMA 0043-2023 叶绿素a在线监测仪

叶绿素a在线监测仪的的要求，试验方法，检验规则，标志、包装、运输和贮存。

Chlorophyll a online monitor

T/CIMA 0045-2023 水质生物毒性在线监测仪

水质生物毒性在线监测仪的要求，试验方法，检验规则，标志、包装、运输和贮存。

Water quality biological toxicity online monitor

ASTM D5423-23 电绝缘评估用强制对流实验室烤箱的标准规范

1.1 This specification covers forced-convection ventilated electrically-heated ovens, operating over all or part of the temperature range from 20 °C above the ambient temperature to 500 °C, and used for thermal endurance evaluation of electrical insulating materials. 1.2 The specification requirements for Type I ovens are based on IEC Publication 60216-4-1, and are technically identical to it. The requirements for Type II ovens are essentially identical to the requirements of Specification D2436. This specification and an associated test method, D5374, have replaced Specification D2436. 1.3 While the ovens covered by this specification are intended primarily for thermal endurance evaluation, their characteristics make them suitable for other applications as applicable. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation

BS EN 16589-1:2022 实验室局部排气装置 铰接式提取臂的一般要求和型式试验方法

1   Scope This document is applicable to articulated extraction arms used as a local exhaust device in laboratories and comprised of a specific capture device (receiving, enclosing or capture hood, nozzle or flat screen) connected to ducting to move air from the capture device to discharge. This document is a product standard. This document covers product performance type test methods. Occupational health and safety assessments methods are not included in this document. This document specifies: • a method to assess the three-dimensional capture zone of an articulated extract arms; • a method for assessing the isothermal and diffusive emission release capture efficiency of articulated extract arms and robustness to a challenge of air disturbance directly in front of and in close proximity to the capture hood and release source positioned on a table; • a method for establishing the reachable, three-dimensional workspace of articulated extract arms; • a method for measuring the pressure drop and noise level of articulated extract arms; • instructions for marking the devices and recommended information in ...

Laboratory local exhaust devices. General requirements and type test methods for articulated extraction arms

T/CEACI A0003-2023 检测实验室 6S 现场管理规范

1 范围 2 规范性引用文件  3 术语和定义  4 6S 现场管理要素的相互关系 5 6S 现场管理体系 6 组织与职责 7 6S 现场管理的目标  8 6S 现场管理的主要内容 9 6S 现场管理的要求 

6S site management criterion in the testing laboratory

ASTM C1222-23 水硬性水泥实验室试验评定的标准实施规程

1.1 This practice covers the technical training and experience of laboratory testing personnel and identifies the minimum technical requirements for laboratory equipment used in testing of hydraulic cement as prescribed by ASTM. 1.2 This practice provides minimum criteria for evaluating the capability of a laboratory to perform chemical or physical tests listed in the various specifications on hydraulic cement (see Note 1). NOTE 1—Relevant hydraulic cement specifications are Specifications C91/C91M, C150/C150M, C595/C595M, C845/C845M, and C1157/ C1157M. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement

KS E 3062-2022 矿石中锑的测定方法

Methods for determination of antimony in ores