71.040.10 化学实验室、实验室设备 标准查询与下载

ASTM C1426-14(2020) 偏光镜的校准和校准标准实践

1.1 Polarimeters and polariscopes used for measuring stress in glass are described in Test Methods F218, C148, and C978. These instruments include a light source and several optical elements (polarizers, optical retarders, filters, and so forth) that require occasional cleaning, realigning, and calibration. The objective of these practices is to describe the calibration and verification procedures required to maintain these instruments in calibration and ensure that the optical setup is within specification for satisfactory measurements. 1.2 It is mandatory throughout these practices that both verification and calibration are carried out by qualified personnel who fully understand the concepts used in measurements of stress retardation and are experienced in the practices of measuring procedures described in Test Methods F218, C148, and C978. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practices for Verification and Calibration of Polarimeters

ASTM F2875-10(2020) 根据ASTM测试方法测试商业烹饪和温暖设备的实验室要求标准指南

1.1 The scope of this guide includes the laboratory and organizational requirements to test commercial cooking and warming appliances (for example, griddles, fryers, ovens, steam cookers, and hot food holding cabinets) for preheat energy consumption and time, idle energy rate, cooking-energy efficiency, and production capacity, in accordance with the appropriate ASTM test methods under the jurisdiction of Committee F26, including the following: Test Method F1275 Test Method F1361 Test Methods F1484 Test Method F1496 Test Methods F1521 Test Method F1605 Test Method F1639 Test Method F1695 Test Method F1784 Test Method F1785 Test Method F1786 Test Method F1787 Test Method F1817 Test Method F1964 Test Method F1965 Test Method F1991 Test Method F2093 Test Method F2140 Test Method F2142 Test Method F2144 Test Method F2237 Test Method F2238 Test Method F2239 Test Method F2380 Test Method F2473 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Laboratory Requirements Necessary to Test Commercial Cooking and Warming Appliances to ASTM Test Methods

IEC 61010-2-040:2020 用于测量 控制和实验室使用的电气设备的安全要求 - 第2-040部分:用于治疗医疗材料的消毒剂和洗衣机消毒器的特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials

IEC 61010-2-040:2020 RLV 测量、控制和实验室用电气设备的安全要求第2-040部分:医疗材料处理用消毒器和清洗消毒器的特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials

JB/T 13874-2020 在线微量溶解氢分析仪

Online Trace Dissolved Hydrogen Analyzer

T/CIMA 0019-2019 质子转移反应质谱仪

本标准规定了质子转移反应质谱仪的术语、分类、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于质子转移反应飞行时间质谱仪以及质子转移反应四极杆质谱仪。

Proton transfer reaction mass spectrometers

ASTM C1222-19a 液压水泥实验室评估标准实践

Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement

T/SICCA 007-2019 净气型排风柜

5.1  基本要求 5.1.1  排风柜应表面平整，无划痕、压伤、锈斑，漆膜附着力强、结合牢靠，不应有气泡、流痕、皱纹等缺陷。 5.1.2  排风柜的面板间及操作窗、框架、排风管道、柜门的连接处应平整、严合。 5.1.3  排风柜的柜门启动关闭应轻便灵活，在开关行程范围内应无卡阻。 5.1.4  排风柜的工作台面应能防溢流。 5.2  噪声要求 排风柜正常运行时的噪声应不大于62dB（A）。 5.3  操作口截面风速要求 排风柜的操作口平均面风速应不小于0.4m/s，不大于0.5m/s。 5.4  面风速偏差要求 排风柜的面风速偏差应小于15%。 5.5  面风速均匀度要求 面风速均匀度不得低于3级，并符合表2的规定。 表2  面风速均匀度分级要求      面风速均匀度　级别 ≤4%　1级 4%～6%（含6%）　2级 6%～8%（含8%）　3级 5.6  控制浓度要求 排风柜的控制浓度应不大于0.5mL/m3。 5.7  空气污染物额定吸附量要求 排风柜的空气污染物额定吸附量应符合附录B的规定。 5.8  电气安全要求 5.8.1  排风柜的电气安全应符合GB 3836.1的规定。 5.8.2  排风柜应有接地导线接出，柜内电源插座应为防溅插座。 5.8.3  进出排风柜的导线穿孔应有绝缘密封穿线卡圈。 5.9  报警装置响应时间要求 排风柜的报警装置响应时间应不大于5s。 5.10  职业接触限值要求 5.10.1  过滤后排出气体的浓度应不大于附录B中的职业接触限值的50%。 5.10.2  过滤后排出气体的浓度达到附录B职业接触限值的50%时，应更换过滤器。 5.11  适用性判定要求 排风柜的适用性判定要求应满足附录A的规定。

Air-purification fume hood

T/DLQYLHH 007-2019 液相色谱制备泵

本标准规定了液相色谱制备泵的要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于流量范围为（100~3000）mL/min液相色谱制备泵。

Preparation pump for liquid chromatography

BS EN 15154-5:2019 紧急安全淋浴 实验室以外场所的水头顶淋浴

What is BS EN 15154-5 about?   BS EN 15154-5 is the fifth part of multiple series that applies to emergency safety showers for sites. It details best practices to install water overhead body showers for sites to minimise hazards to users.   BS EN 15154-5 is a product specification, giving performance requirements for water overhead   emergency safety body showers installed on industrial and logistic sites, (in combination with safety eyewashes and hand-held showers as well)   Which are permanently connected to a water supply

Emergency safety showers - Water overhead body showers for sites other than laboratories

BS EN 15154-6:2019 紧急安全淋浴 用于实验室以外场所的管道式多喷嘴身体淋浴

What is BS EN 15154-6 about?   BS EN 15154-6 is the sixth part of multiple series that applies to emergency safety showers for sites. It details best practices to install plumbed-in multiple nozzle body showers for sites to minimise hazards to users.   BS EN 15154-6 is a product specification, giving performance requirements for plumbed-in multiple nozzle emergency safety body showers which are permanently connected to a water supply and installed on industrial and logistic sites.   BS EN 15154-6 also specifies requirements in respect of installation, adjustment and marking of the showers as well as operation and maintenance instructions to be given by the manufacturer.  

Emergency safety showers - Plumbed-in multiple nozzle body showers for sites other than laboratories

T/CIMA 0012-2019 火锅底料中吗啡、可待因胶体金免疫层析检测卡

本标准规定了火锅底料中吗啡、可待因胶体金免疫层析检测卡术语和定义、要求、试验方法、检验规则、标志、使用说明书、包装、运输和贮存。 本标准适用于采用竞争性抑制免疫层析原理定性分析的火锅底料中吗啡、可待因胶体金免疫层析检测卡。

Colloidal gold immunochromatographic detection card for morphine and codeine in hot pot bottom ingredients

T/CIMA 0010-2019 食品中硼砂测定试纸

本标准规定了食品中硼砂测定试纸的术语和定义、要求、试验方法、检验规则、包装标识和使用说明书、包装、运输和贮存。 本标准适用于姜黄比色法检测肉制品（如肉丸）、面食类、凉粉、凉皮等食品中硼砂的快速定性检测试纸（以下简称“试纸”）。

Test paper for the determination of borax in food

T/CIMA 0009-2019 水产品中孔雀石绿快速检测自动化前处理仪

本标准规定了水产品中孔雀石绿快速检测自动化前处理仪的术语和定义、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于水产品中孔雀石绿快速检测自动化前处理仪

Automatic pretreatment instrument for rapid detection of malachite green in aquatic products

T/CIMA 0011-2019 食品中黄曲霉毒素B1胶体金免疫层析检测卡

本标准规定了食品中黄曲霉毒素B1胶体金免疫层析检测卡术语和定义、要求、试验方法、标识、标签、使用说明书、包装、运输和贮存。 本标准适用于竞争抑制免疫层析原理快速定性检测谷物及其制品、坚果及籽类、特殊膳食用食品、油脂及其制品等食品中的黄曲霉毒素B1的胶体金免疫层析检测卡（以下简称“检测卡”）。

Colloidal gold immunochromatographic detection card for aflatoxin B1 in food

IEC 61010-2-033:2019 RLV 测量、控制和实验室用电气设备的安全要求第2-033部分:家用和专业用手持式万用表和其他能够测量电网电压的仪表的特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-033: Particular requirements for hand-held multimeters and other meters for domestic and professional

IEC 61010-2-033:2019 测量、控制和实验室用电气设备的安全要求第2-033部分:家用和专业用手持式万用表和其他能够测量电网电压的仪表的特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-033: Particular requirements for hand-held multimeters and other meters for domestic and professional

ASTM C1222-19 液压水泥实验室评估标准实践

Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement

ASTM E145-19 重力对流和强制通风烤箱的标准规范

1.1 This specification covers the performance requirements for general-purpose air ovens ordinarily used in testing operations, which have a testing chamber up to 0.6 m3 (25 ft3 ) in volume. It is applicable to gravity-convection ovens designed to operate over all or part of the temperature range from 20 °C above ambient temperature to 200 °C and to forcedventilation ovens designed to operate over all or part of the temperature range from 20 °C above ambient temperature to 500 °C. NOTE 1—Ovens are designed for maximum operating temperatures of about 200 °C, 300 °C, and 500 °C, the thermal insulation and cost of the oven being dependent on the maximum temperature required. 1.2 This specification does not include safety requirements that are essential for ovens used in the presence of combustible vapors or gases. 1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Gravity-Convection and Forced-Ventilation Ovens

IEC 61010-2-091:2019 RLV 测量、控制和实验室用电气设备的安全要求第2-091部分:柜式X射线系统的特殊要求

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-091: Particular requirements for cabinet X-ray systems