75.020 石油和天然气的开采与加工 标准查询与下载

SY/T 5329-2022 碎屑岩油藏注水水质指标技术要求及分析方法

Technical requirements and analysis methods for water quality indicators of clastic reservoir water injection

SY/T 5091-2022 钻井液用降粘剂 磺化栲胶

Sulfonated tannins as viscosity reducer for drilling fluids

SY/T 5504.5-2022 油井水泥外加剂评价方法 第5部分：防气窜剂

Evaluation method for oil well cement admixtures Part 5: Anti-gas channeling agent

SY/T 6098-2022 天然气可采储量计算方法

Natural gas recoverable reserves calculation method

SY/T 5387-2022 常规原油油藏试采地质技术规范

Geological and Technical Specifications for Trial Production of Conventional Crude Oil Reservoirs

SY/T 6102-2022 油田开发监测及资料录取规范

Oilfield development monitoring and data collection specifications

SY/T 6511-2022 油田开发方案及调整方案经济评价技术规范

Technical specifications for economic evaluation of oilfield development plans and adjustment plans

SY/T 5504.6-2022 油井水泥外加剂评价方法 第6部分：减轻剂

Evaluation Methods for Oil Well Cement Admixtures Part 6: Mitigating Agents

SY/T 6172-2022 油田试井技术规范

Oilfield well testing technical specifications

ISO/FDIS 6338 计算液化天然气工厂温室气体排放量的方法

Method to calculate GHG emissions at LNG plant

DB61/T 1583-2022 油气田压裂返排液处理技术规范

本文件规定了油气田压裂过程中产生的压裂返排液处理的一般规定、收集与贮存、运输、处理与处置、水质分析方法及监测。 本文件适用于油气田勘探开发过程中压裂施工产生的压裂返排液的处理处置。

Oil and gas field fracturing flowback fluid treatment technical specifications

CEN ISO/TS 3250:2022 石油、石化和天然气工业 运行阶段生产效率的计算和报告（ISO/TS 3250:2021）

This document provides requirements and guidance for reporting of production performance data and production loss data in the operating phase by use of production loss categorization. It supplements the principles of ISO 20815:2018, Clause E.3 and Annex G by providing additional details. This document focusses on installations and asset elements within the upstream business category. Business categories and associated installations and plants/units, systems and equipment classes are used in line with ISO 14224:2016, Annex A. The production loss categories given in Annex A are given at a high taxonomic level and supplements the reporting of failure and maintenance parameters as defined in ISO 14224:2016, Annex B.

Petroleum, petrochemical and natural gas industries - Calculation and reporting production efficiency in the operating phase (ISO/TS 3250:2021)

BS EN ISO 35102:2021 石油和天然气工业 北极行动 海上设施的逃生、疏散和救援

1   Scope This document establishes the principles, specifies the requirements and provides guidance for the development and implementation of an escape, evacuation and rescue (EER) plan as it applies to offshore installation design, construction, transportation, installation, operation service life inspection/repair, decommissioning and removal, related to activities of petroleum and natural gas industries in arctic and cold regions. Reference to arctic and cold regions in this document is deemed to include both the Arctic and other locations characterized by low ambient temperatures and the presence or possibility of sea ice, icebergs, icing conditions, persistent snow cover and/or permafrost. The objective of this document is to ensure that the offshore EER plan and provisions in arctic and cold marine regions provide an appropriate level of reliability with respect to personnel safety, environmental protection and asset value to the owner, to the industry and to society in general. This document contains requirements for the design, operation, maintenance, and service-life inspection or repair of new installations and structures, and to modification of existing installations for operation in the Arctic offshore and other offshore cold region environments where ice can be present for at least a portion of the year. This includes offshore exploration, production and accommodation units utilized for such activities. To a limited extent, this document also addresses the vessels that support emergency response (ER), if part of the overall EER plan. While this document does not apply specifically to mobile offshore drilling units (MODU – see ISO 19905-1), many of the EER pro...

Petroleum and natural gas industries. Arctic operations. Escape, evacuation and rescue from offshore installations

T/CAS ES10110205006-2022 工业品质量分级评价规则 钻井液用防塌降滤失剂

1　范围 本文件规定了钻井液用防塌降滤失剂质量分级的评价程序和要求、评价方法、质量分级等内容。 本文件适用于钻井液用防塌降滤失剂（包括抗高温抗盐防塌降滤失剂和钻井液用防塌降黏降滤失剂）质量分级评价活动。 2　规范性引用文件 下列文件对于本文件的应用是必不可少的。凡是注日期的引用文件，仅注日期的版本适用于本文件。凡是不注日期的引用文件，其最新版本（包括所有的修改单）适用于本文件。 GB/T 6678 化工产品采样总则 GB/T 6679 固体化工产品采样通则 GB/T 6682分析实验室用水规格和试验方法 GB/T 16783.1 石油天然气工业 钻井液现场测试 第1部分：水基钻井液 SY/T 5490 钻井液试验用土 SY/T 5677 钻井液用滤纸 T/CAS ES000000001—2022（V01） 工业品质量分级评价规则 通则

Rules for quality grading and evaluating of industrial products—Anti-Collapse fluid loss agent for drilling fluid

T/CAS ES10250203001-2022 工业品质量分级评价规则 原油破乳剂

1　范围 本文件规定了原油破乳剂质量分级的评价程序和要求、评价方法、质量分级等内容。 本文件适用于原油破乳剂质量分级评价活动。 2　规范性引用文件 下列文件对于本文件的应用是必不可少的。凡是注日期的引用文件，仅注日期的版本适用于本文件。凡是不注日期的引用文件，其最新版本（包括所有的修改单）适用于本文件。 GB/T 1884  原油和液体石油产品密度实验室测定法（密度计法） GB/T 6678  化工产品采样总则 GB/T 6680  液体化工产品采样通则 GB/T 6682  分析实验室用水规格和试验方法 GB/T 8170 数值修约规则与极限数值的表示和判定 GB/T 21615 危险品 易燃液体闭杯闪点试验方法 SH/T 0604 原油和石油产品密度测定法（U形振动管法） SY/T 5329  碎屑岩油藏注水水质指标及分析方法 SY/T 5402  原油水含量的测定 电脱法 SY/T 7329  油田化学剂中有机氯含量测定方法 T/CAS ES000000001—2022（V01） 工业品质量分级评价规则 通则

Rules for quality grading and evaluating of industrial products—Demulsifier for crude oil

T/GRM 041-2022 页岩油井地质工程一体化压裂设计规范

1 地质工程一体化压裂设计方法　 2 地质工程一体化压裂工艺技术　 3 健康、安全及环境控制要求　 4（资料性）地质工程一体化压裂设计书格式　 5 （资料性）地质工程一体化压裂设计压裂设计相关表格　 6 （资料性）地质工程一体化压裂压裂施工现场质量控制表　

Specification for integrated fracturing design of shale oil well geological engineering

T/GRM 038-2022 分布式光纤井筒泄露检测数据解释流程规范

1.质量控制方法； 2.数据资料收集； 3.数据解释流程； 4.解释成果要求； 5.（资料性） 解释成果示例。

Specification of distributed fiber optical data for wellbore leakage detection interpretation procedure

NB/T 10852-2021 煤矿采动稳定区煤层气开发储量评估和片区优选方法

Coalbed methane development reserve evaluation and area optimization methods in stable coal mining areas

NB/T 10853-2021 煤矿采动区煤层气地面抽采井群技术规范

Technical Specifications for Coalbed Methane Surface Drainage Well Groups in Coal Mining Areas

DB61/T 1501-2021 液态CO2驱油与封存注入地面操作规程

本文件规定了液态CO2驱油与封存注入的术语和定义、液态CO2地面注入系统、注入前检查、空载试车、注入系统运行、停注、注入参数监测、安全环保注意事项、相关记录表格等内容。本文件适用于液态CO2驱油与地质封存注入操作。

Liquid CO2 flooding and storage injection surface operation rules