75.020 石油和天然气的开采与加工 标准查询与下载
共找到 884 条与 石油和天然气的开采与加工 相关的标准，共 59 页
This document establishes the principles, specifies the requirements and provides guidance for the development and implementation of an escape, evacuation and rescue (EER) plan. It is applicable to offshore installation design, construction, transportation, installation, offshore production/exploration drilling operation service life inspection/repair, decommissioning and removal activities related to petroleum and natural gas industries in the arctic and cold regions. Reference to arctic and cold regions in this document is deemed to include both the Arctic and other locations characterized by low ambient temperatures and the presence or possibility of sea ice, icebergs, icing conditions, persistent snow cover and/or permafrost. This document contains requirements for the design, operation, maintenance, and service-life inspection or repair of new installations and structures, and to modification of existing installations for operation in the offshore Arctic and cold regions, where ice can be present for at least a portion of the year. This includes offshore exploration, production and accommodation units utilized for such activities. To a limited extent, this document also addresses the vessels that support ER, if part of the overall EER plan. While this document does not apply specifically to mobile offshore drilling units (MODUs, see ISO 19905‑1) many of the EER provisions contained herein are applicable to the assessment of such units in situations when the MODU is operated in arctic and cold regions. The provisions of this document are intended to be used by stakeholders including designers, operators and duty holders. In some cases, floating platforms (as a type of offshore installations) can be classified as vessels (ships) by national law and the EER for these units are stipulated by international maritime law. However, many of the EER provisions contained in this document are applicable to such floating platforms. This document applies to mechanical, process and electrical equipment or any specialized process equipment associated with offshore arctic and cold region operations that impacts the performance of the EER system. This includes periodic training and drills, EER system maintenance and precautionary down-manning as well as emergency situations. EER associated with onshore arctic oil and gas facilities are not addressed in this document, except where relevant to an offshore development.
Petroleum and natural gas industries - Arctic operations - Escape, evacuation and rescue from offshore installations (ISO 35102:2020)
- ICS
- 75.020
- CCS
- 发布
- 2021-12-15
- 实施
- 2022-03-31
This document specifies requirements for and gives guidance on the application of life cycle costing to create value for the development activities and operations associated with drilling, exploitation, processing and transport of petroleum, petrochemical and natural gas resource
Petroleum, petrochemical and natural gas industries - Life cycle costing (ISO 15663:2021); English version EN ISO 15663:2021
- ICS
- 75.020
- CCS
- 发布
- 2021-10-00
- 实施
撬装式液化天然气（LNG）汽车加油设备设计所涉及的站址选择与平面布置、加气工艺及设施、加气设备配套设施、LNG卸车装置、LNG管道系统、消防及安全、安装调试及验收等
Technical specifications for skid-mounted liquefied natural gas (LNG) vehicle refueling equipment
- ICS
- 75.020
- CCS
- G544
- 发布
- 2021-09-26
- 实施
- 2021-09-27
Petroleum and natural gas industries - Arctic operations - Escape, evacuation and rescue from offshore installations (ISO 35102:2020)
- ICS
- 75.020
- CCS
- 发布
- 2021-09-15
- 实施
- 2021-09-15
Petroleum, petrochemical and natural gas industries – Calculation and reporting production efficiency in the operating phase
- ICS
- 75.020
- CCS
- 发布
- 2021-09-10
- 实施
- 2021-09-10
Petroleum, petrochemical and natural gas industries - Life cycle costing
- ICS
- 75.020
- CCS
- 发布
- 2021-09-09
- 实施
- 2021-09-09
Petroleum, petrochemical and natural gas industries. Calculation and reporting production efficiency in the operating phase. Petroleum
- ICS
- 75.020
- CCS
- 发布
- 2021-09-09
- 实施
- 2021-09-09
Petroleum, petrochemical and natural gas industries — Calculation and reporting production efficiency in the operating phase
- ICS
- 75.020
- CCS
- 发布
- 2021-08-31
- 实施
Petroleum, petrochemical and natural gas industries -- Life cycle costing (ISO 15663:2021)
- ICS
- 75.020
- CCS
- 发布
- 2021-08-19
- 实施
- 2021-08-19
本文件规定了输气管道线路水工保护工程施工质量验收的基本规定、中间验收和竣工验收。 本文件适用于按GB50251设计的已建或在建输气管道工程，其它管道可参照执行。
Specifications for construction quality acceptance of hydraulic protection works for gas pipelines
- ICS
- 75.020
- CCS
- E 92
- 发布
- 2021-08-16
- 实施
- 2021-11-16
本文件规定了煤矿采空区输气管道的风险识别及分析评价、管道安全监测及预警、防控及应对措施。 本文件适用于按GB50251设计的输气管道工程，其它管道工程可参照执行。
Technical specifications for safety management of gas pipelines in coal mine goaf
- ICS
- 75.020
- CCS
- E 92
- 发布
- 2021-08-16
- 实施
- 2021-11-16
本文件规定了煤矿采空区输气管道站场的风险识别及分析评价、管道站场安全监测及预警、防控及应对措施。 本文件适用于按GB 50251设计的输气管道站场，其它管道站场可参照执行。
Technical specifications for safety management of gas pipeline stations in coal mine goaf
- ICS
- 75.020
- CCS
- E 92
- 发布
- 2021-08-16
- 实施
- 2021-11-16
Petroleum and natural gas industries - Arctic operations - Escape, evacuation and rescue from offshore installations (ISO 35102:2020)
- ICS
- 75.020
- CCS
- 发布
- 2021-08-00
- 实施
ISO 17349:2016 contains provisions for design of topside facilities for offshore plants handling CO2-rich streams at high pressures; i.e. CO2 molar concentration above 10 %. The surface systems include usual offshore process unit operations, as shown in Figure 1. ISO 17349:2016 is applicable only to topside facilities of fixed and floating oil and gas production offshore units up to the last barrier, such as an ESDV. Subsea production systems and Cryogenic CO2 separation are not covered.
Petroleum and natural gas industries — Offshore platforms handling streams with high content of CO2 at high pressures
- ICS
- 75.020
- CCS
- 发布
- 2021-07-01
- 实施
This document establishes a procedure for verifying that the manufacturer of special materials for the petroleum, petrochemical and natural gas industries has sufficient competence and experience of the relevant material grades of metal, and the necessary facilities and equipment, to manufacture these materials in the required shapes and sizes with acceptable properties according to the applicable standard, material specification and/or material data sheet specified by the purchaser. This document is applicable to manufacturers of various materials, product forms and manufacturing processes when specified by the purchaser. This document has been established considering especially, but not exclusively: a) duplex stainless steel; b) high alloyed austenitic stainless steel; c) nickel-based alloys; d) titanium and its alloys. This document is also applicable to the processes of induction bending and strain-hardened products.
Petroleum, petrochemical and natural gas industries — Scheme for conformity assessment of manufacturers of special materials
- ICS
- 75.020
- CCS
- 发布
- 2021-07-01
- 实施
ISO 19008:2016 describes the standard cost coding system (SCCS) that classifies costs and quantities related to exploration, development, operation and removal of oil and gas production and processing facilities and to the petroleum, petrochemical and natural gas industry. Upstream, midstream, downstream and petrochemical business categories are included. The SCCS for coding of costs is applicable to: - cost estimating; - actual cost monitoring and reporting; - collection of final quantities and cost data; - standardized exchange of cost data among organizations; - implementation in cost systems. ISO 19008:2016 is intended for users such as the following: a) owner/operator/company (individual or grouped entity that is entitled or contributes to operations in the exploitation of oil and gas fields); b) industry/trade associations; c) manufacturers/contractors; d) cost engineering service contractors, cost system providers, benchmarking providers, etc.; e) authorities/regulatory bodies. ISO 19008:2016 does not apply to the following: 1) cost classification relevant to cost accounting rules, specific contractual agreements, local requirements for cost reporting to national bodies, government rules and tax regulations, authorization for expenditure (AFE), billing purposes etc.; 2) specific project breakdown structures (e.g. work breakdown structures, contract breakdown structures, organizational breakdown structure) or asset breakdowns (e.g. TAG/system codes, area/module breakdown structure) which are and will remain unique. However, this International Standard can provide a basis for the establishment of such specific classification systems.
Standard cost coding system for oil and gas production and processing facilities
- ICS
- 75.020
- CCS
- 发布
- 2021-07-01
- 实施
本标准规定了干粉状耐温速溶高分子量驱油用聚丙烯酰胺的技术要求、试验方法、检验规则、标志、包装、运输和贮存及HSE要求。 本标准适用于干粉状耐温速溶高分子量驱油用聚丙烯酰胺产品的采购和质量检验。
Temperature resistant and instant high molecular weight polyacrylamide for oil displacement
- ICS
- 75.020
- CCS
- C266
- 发布
- 2021-06-21
- 实施
- 2021-06-21
Petroleum and natural gas industries – Arctic operations – Escape, evacuation and rescue from offshore installations
- ICS
- 75.020
- CCS
- 发布
- 2021-06-18
- 实施
- 2021-06-18
Petroleum, petrochemical and natural gas industries - Life cycle costing (ISO 15663:2021)
- ICS
- 75.020
- CCS
- 发布
- 2021-06-00
- 实施
- 2021-06-01
Petroleum, petrochemical and natural gas industries - Life cycle costing (ISO 15663:2021)
- ICS
- 75.020
- CCS
- 发布
- 2021-05-31
- 实施
- 2021-05-31
