共找到 502 条与 金属材料无损检测 相关的标准,共 34 页
本标准适用于X射线衍射法定量测定中、低碳钢和中、低碳低合金钢中残余奥氏体的含量。
Retained austenite in steel--Quantitative determination--Method of X-ray diffractometer
本标准适用于X射线衍射仪精确测定立方晶系粉末物质的点阵常数。对块状试样和其他晶系的晶体,在实验技术上亦应参照使用。
The lattice constant determination of metals--Method of X-ray diffractometer
本标准适用于锅炉、压力容器、原子反应堆、贮罐等使用的复合钢板的超声波探伤,也可供其他用途的复合金属板超声波探伤时参考。 本标准适用于总厚度8mm以上的轧制复合钢板、爆炸压接复合钢板以及堆焊复合钢板。其它特殊规格的复合钢板的探伤由供需双方协商解决。 本标准所述的探伤方法主要用于检验复合钢板复合面的未接合。基板和复板的质量要求应符合制造复合钢板的技术条件。
Method for ultrasonic testing of clad steel plates
本标准规定了厚度等于或大于30mm的碳钢和低合金钢铸件的超声探伤方法;以及根据超声探伤的结果对铸件进行质量评级的方法。所用的超声探伤方法仅限于A型显示脉冲反射法。
Methods for ultrasonic testing and for specifying quality levels of steel castings
本标准适用于直径小于15mm的铁镍、铁镍铬、铁镍钴玻封合金及铁镍、铁镍钴瓷封合金等的棒材气密性的定性检验。
Determination of hermeticity of expansion alloys
本标准规定了厚度为5~300mm铸钢件的X射线、γ射线照相方法及射线底片等级分类方法。
Methods of radiographic testing and classification of radiographs for steel castings
本标准目的在于指导正确使用无损探伤技术,提出了应用常规无损探伤方法时应遵守的规则。
Guidelines for application of conventional nondestructive testing methods
本标准适用于横截面厚度大于或等于13mm的钛及钛合金加工产品的超声波探伤。
Method of ultrasonic inspection for wrought titanium and titanium alloy products
本标准规定的断口检验方法,适用于碳素结构钢、低合金结构钢的钢板、条钢和型钢.也可供其它钢断口检验参考。
Method of fracture test for carbon steel and low alloy steels
BS EN 12680-3 Founding - Ultrasonic testing - Part 3: Spheroidal graphite cast iron castings
BS EN 12680-2 Founding Ultrasonic testing - Part 2: Steel castings for highly stressed components
本文件规定了超声波焊点检测设备(以下简称超声探伤仪)的术语和定义、检测原理、基本要求、 计量性能要求、计量器具控制、标志、包装、运输、储存。 超声波焊点检测设备的生产可参照使用。
Technical specification for ultrasonic welding point detection equipment
本文件规定了采用压入能量差法测定承压设备表面残余应力的术语和定义、原理、测试设备、试验程序、试验报告等。 本文件适用于承压设备表面残余应力测试。其他可明确表面均匀二向应力分布的金属材料残余应力测试也可参照本文件执行。
Determination of residual stress in pressure equipment— The indentation energy difference method
本文件规定了钢板残余应力磁各向异性检测方法的检测原理、检测系统、检测程序和检测报告。 本文件适用于铁磁性钢板及其制品残余应力的磁各向异性检测。
Measurement method of residual stress in steel plate by magnetic anisotropy
本标准适用于金属结构焊缝检测。 主要技术内容包括范围、一般要求、检测工艺、检测方法、检测程序、检测数据的分析、缺陷评判等。 标准内容主要为:规定了交流电磁场检测的术语和定义、检测人员及设备的要求、检测工艺的基本要求、缺陷的评判及检测报告等基本要求。
Nondestructive testing - examination of welds using the alternating current field measurement technique
本文件规定了钢轨轨底表面涡流检测方法的检测原理、人员要求、校准样轨、检测设备、检测程序、系统校验、结果评定和检测报告。 本文件适用于50 kg/m~75 kg/m钢轨的轨底表面自动涡流检测,其他规格钢轨的轨底涡流检测亦可参照执行。
Method of eddy current testing for the rail foot undersurface
Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates
Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
Standard Test Method for Analysis of Ni-Base Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号