77.120.30 铜和铜合金 标准查询与下载

YS/T 1512.6-2021 铜冶炼烟尘化学分析方法 第6部分：铟含量的测定 火焰原子吸收光谱法

Methods for chemical analysis of copper smelting fume Part 6: Determination of indium content Flame atomic absorption spectrometry

YS/T 1512.1-2021 铜冶炼烟尘化学分析方法 第1部分：铜含量的测定 火焰原子吸收光谱法和碘量法

Methods for chemical analysis of copper smelting fume Part 1: Determination of copper content Flame atomic absorption spectrometry and iodometric method

YS/T 1512.4-2021 铜冶炼烟尘化学分析方法 第4部分：铋含量的测定 火焰原子吸收光谱法和Na2EDTA滴定法

Methods for chemical analysis of copper smelting smoke Part 4: Determination of bismuth content Flame atomic absorption spectrometry and Na2EDTA titration

YS/T 1512.8-2021 铜冶炼烟尘化学分析方法 第8部分：银和金含量的测定 火焰原子吸收光谱法和火试金法

Methods for chemical analysis of copper smelting fume Part 8: Determination of silver and gold content Flame atomic absorption spectrometry and fire assay

ASTM G188-05(2021) 黄铜和其他铜合金用检漏器溶液的标准规范

1.1 This specification covers the requirements for leak detector solutions suitable for use in checking the leakage of valves, pipes, fittings, joints, and so forth of a pressurized gas system fabricated from brasses and other copper alloys. 1.2 This specification deals with the stress-corrosion cracking aspect of leak detector solutions. The effectiveness, chemical, physical and mechanical properties of leak detector solutions are not within the scope of this specification. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and to determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Leak Detector Solutions Intended for Use on Brasses and Other Copper Alloys

T/CIAA 015-2021 医院用铜基抗菌防霉剂

本文件规定了医院用铜基抗菌防霉剂的术语和定义、技术要求、试验方法、检验规则以及标志、包装、运输、贮存。

Copper-based antimicrobial agents for hospital

KS D 2714-2021 扫描探针显微镜 侧向力显微镜方法

Scanning probe microscope－Method for lateral force microscope

KS D 2713-2021 NSOM（近场扫描光学显微镜）空间分辨率评价

Evaluation of spatial resolution of NSOM(Near-field Scanning Optical Microscope)

KS D 1897-2021 铜及铜合金中镍的测定方法

Methods for determination of nickel in copper and copper alloys

KS D 1892-2021 铜及铜合金中铁的测定方法

Mehods for determination of iron in copper and copper alloys

KS D 0214-2021 铜和铜合金管的涡流检测

Eddy current testing for copper and copper-alloy pipes and tubes

T/CNIA 0112-2021 废电路板取样、制样方法

本文件规定了废电路板取样和制样的一般要求、取样、制样、品位计算和试样要求。 本文件适用于废电路板的取样和制样。

Sampling and sample preparation methods of waste circuit boards

T/SACE 015-2020 废催化剂制粗铜

本文件适用于以炼油、化肥及化工行业中产生的含铜废催化剂为原料，经高温熔融还原法产生的粗铜。主要用于电解铜原料或合金铜的铸造。

Blister Copper Made from Waste Catalyst

KS D 1651-2020 铜和铜合金化学分析通则

General rules for chemical analysis of copper and copper alloys

KS D 2366-2020 铜和铜合金 - 废料

Copper and copper alloys — Scrap

YS/T 668-2020 铜及铜合金理化检测取样方法

Sampling methods for physical and chemical testing of copper and copper alloys

T/YTTX 0002-2020 绿色设计产品评价技术规范 电工圆铜线

电工圆铜线绿色设计产品的评价要求、评价方法和产品生命周期评价报告编制方法。

Specification for green-design product assessment round copper wire for electrical purposes

T/YTTX 0001-2020 铜与铜合金分类、性能及应用

以压力加工方法生产的铜与铜合金加工产品及其所用的坯料的分类、性能及应用

Classification, properties and applications of copper and copper alloys

JB/T 13746-2019 铜艺术铸件铸造缺陷补焊修正技术规范

Technical Specifications for Repair Welding Correction of Casting Defects in Copper Art Castings

KS D 5401-2019 无氧铜片材 板材 带材 无缝管 线材 棒材和线材的电子器件

Oxygen free copper sheets, plates, strips, seamless pipes and tubes, rods, bars and wires for electronic devices